Skip to content

R
rt-thread

BaiXuePrincess / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread
未验证 提交 161778df 编写于 作者: T Tanek 提交者： GitHub
浏览文件
操作

Merge pull request #1317 from liu2guang/master 

[BSP] add fire board support and optimize bsp.|添加野火开发板支持并优化bsp.
上级 d0b592c0 045500ce
展开全部 隐藏空白更改
内联 并排
Showing with 2465 addition and 554 deletion
bsp/imxrt1052-evk/.config
浏览文件 @ 161778df
......@@ -76,6 +76,7 @@ CONFIG_FINSH_USING_HISTORY=y
CONFIG_FINSH_HISTORY_LINES=5
CONFIG_FINSH_USING_SYMTAB=y
CONFIG_FINSH_USING_DESCRIPTION=y
# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
CONFIG_FINSH_THREAD_PRIORITY=20
CONFIG_FINSH_THREAD_STACK_SIZE=4096
CONFIG_FINSH_CMD_SIZE=80
......@@ -297,6 +298,7 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# tools packages
#
# CONFIG_PKG_USING_CMBACKTRACE is not set
# CONFIG_PKG_USING_EASYFLASH is not set
# CONFIG_PKG_USING_EASYLOGGER is not set
# CONFIG_PKG_USING_SYSTEMVIEW is not set
# CONFIG_PKG_USING_IPERF is not set
......@@ -307,12 +309,30 @@ CONFIG_LWIP_NETIF_LOOPBACK=0
# CONFIG_PKG_USING_FASTLZ is not set
# CONFIG_PKG_USING_MINILZO is not set
# CONFIG_PKG_USING_QUICKLZ is not set
# CONFIG_PKG_USING_MULTIBUTTON is not set
#
# example package: hello
#
# CONFIG_PKG_USING_HELLO is not set
# CONFIG_PKG_USING_MULTIBUTTON is not set
CONFIG_SOC_IMXRT1052=y
CONFIG_BOARD_RT1050_EVK=y
# CONFIG_BOARD_RT1050_FIRE is not set
#
# RT1050_EVK Bsp Config
#
#
# Select uart device
#
CONFIG_RT_USING_UART1=y
CONFIG_RT_USING_HP_RTC=y
# CONFIG_RT_USING_UART2 is not set
# CONFIG_RT_USING_UART3 is not set
# CONFIG_RT_USING_UART4 is not set
# CONFIG_RT_USING_UART5 is not set
# CONFIG_RT_USING_UART6 is not set
# CONFIG_RT_USING_UART7 is not set
# CONFIG_RT_USING_UART8 is not set
CONFIG_RT_USING_SDRAM=y
CONFIG_RT_USING_RTC_HP=y
bsp/imxrt1052-evk/Kconfig
浏览文件 @ 161778df
......@@ -23,17 +23,66 @@ config SOC_IMXRT1052
select ARCH_ARM_CORTEX_M7
default y
if RT_USING_SERIAL
config RT_USING_UART1
bool "Using RT_USING_UART1"
default y
endif
# RT1050 board select!
choice
prompt "RT1050 Board select"
default BOARD_RT1050_EVK
config BOARD_RT1050_EVK
bool "RT1050_EVK"
config BOARD_RT1050_FIRE
bool "RT1050_FIRE"
endchoice
if RT_USING_RTC
config RT_USING_HP_RTC
bool "Using RT_USING_HP_RTC"
default n
endif
if BOARD_RT1050_EVK
menu "RT1050_EVK Bsp Config"
menu "Select uart device"
config RT_USING_UART1
bool "Using uart1"
select RT_USING_SERIAL
default y
config RT_USING_UART2
bool "Using uart2"
select RT_USING_SERIAL
default n
config RT_USING_UART3
bool "Using uart3"
select RT_USING_SERIAL
default n
config RT_USING_UART4
bool "Using uart4"
select RT_USING_SERIAL
default n
config RT_USING_UART5
bool "Using uart5"
select RT_USING_SERIAL
default n
config RT_USING_UART6
bool "Using uart6"
select RT_USING_SERIAL
default n
config RT_USING_UART7
bool "Using uart7"
select RT_USING_SERIAL
default n
config RT_USING_UART8
bool "Using uart8"
select RT_USING_SERIAL
default n
endmenu
#menu "SDRAM drive support"
config RT_USING_SDRAM
bool "Using sdram"
default y
#endmenu
#menu "RTC drive support"
config RT_USING_RTC_HP
bool "Using hp rtc"
select RT_USING_RTC
default n
#endmenu
if RT_USING_USB_DEVICE
choice
......@@ -47,4 +96,59 @@ if RT_USING_USB_DEVICE
endchoice
endif
endmenu
endif
if BOARD_RT1050_FIRE
menu "RT1050_FIRE Bsp Config"
menu "Select uart device"
config RT_USING_UART1
bool "Using uart1"
select RT_USING_SERIAL
default y
config RT_USING_UART2
bool "Using uart2"
select RT_USING_SERIAL
default n
config RT_USING_UART3
bool "Using uart3"
select RT_USING_SERIAL
default n
config RT_USING_UART4
bool "Using uart4"
select RT_USING_SERIAL
default n
config RT_USING_UART5
bool "Using uart5"
select RT_USING_SERIAL
default n
config RT_USING_UART6
bool "Using uart6"
select RT_USING_SERIAL
default n
config RT_USING_UART7
bool "Using uart7"
select RT_USING_SERIAL
default n
config RT_USING_UART8
bool "Using uart8"
select RT_USING_SERIAL
default n
endmenu
#menu "SDRAM drive support"
config RT_USING_SDRAM
bool "Using sdram"
default y
#endmenu
#menu "RTC drive support"
config RT_USING_RTC_HP
bool "Using hp rtc"
select RT_USING_RTC
default n
#endmenu
endmenu
endif
bsp/imxrt1052-evk/applications/main.c
浏览文件 @ 161778df
......@@ -38,29 +38,29 @@
void dump_clock(void)
{
rt_kprintf("CPU clock: %d\n", CLOCK_GetFreq(kCLOCK_CpuClk));
rt_kprintf("AHB clock : %d\n", CLOCK_GetFreq(kCLOCK_AhbClk));
rt_kprintf("SEMC clock : %d\n", CLOCK_GetFreq(kCLOCK_SemcClk));
rt_kprintf("IPG clock : %d\n", CLOCK_GetFreq(kCLOCK_IpgClk));
rt_kprintf("OSC clock selected : %d\n", CLOCK_GetFreq(kCLOCK_OscClk));
rt_kprintf("RTC clock: %d\n", CLOCK_GetFreq(kCLOCK_RtcClk));
rt_kprintf("ARMPLLCLK : %d\n", CLOCK_GetFreq(kCLOCK_ArmPllClk));
rt_kprintf("USB1PLLCLK : %d\n", CLOCK_GetFreq(kCLOCK_Usb1PllClk));
rt_kprintf("USB1PLLPDF0CLK : %d\n", CLOCK_GetFreq(kCLOCK_Usb1PllPfd0Clk));
rt_kprintf("USB1PLLPFD1CLK : %d\n", CLOCK_GetFreq(kCLOCK_Usb1PllPfd1Clk));
rt_kprintf("USB1PLLPFD2CLK : %d\n", CLOCK_GetFreq(kCLOCK_Usb1PllPfd2Clk));
rt_kprintf("USB1PLLPFD3CLK : %d\n", CLOCK_GetFreq(kCLOCK_Usb1PllPfd3Clk));
rt_kprintf("USB2PLLCLK : %d\n", CLOCK_GetFreq(kCLOCK_Usb2PllClk));
rt_kprintf("SYSPLLCLK : %d\n", CLOCK_GetFreq(kCLOCK_SysPllClk));
rt_kprintf("SYSPLLPDF0CLK : %d\n", CLOCK_GetFreq(kCLOCK_SysPllPfd0Clk));
rt_kprintf("SYSPLLPFD1CLK : %d\n", CLOCK_GetFreq(kCLOCK_SysPllPfd1Clk));
rt_kprintf("SYSPLLPFD2CLK : %d\n", CLOCK_GetFreq(kCLOCK_SysPllPfd2Clk));
rt_kprintf("SYSPLLPFD3CLK : %d\n", CLOCK_GetFreq(kCLOCK_SysPllPfd3Clk));
rt_kprintf("Enet PLLCLK ref_enetpll0 : %d\n", CLOCK_GetFreq(kCLOCK_EnetPll0Clk));
rt_kprintf("Enet PLLCLK ref_enetpll1 : %d\n", CLOCK_GetFreq(kCLOCK_EnetPll1Clk));
rt_kprintf("Enet PLLCLK ref_enetpll2 : %d\n", CLOCK_GetFreq(kCLOCK_EnetPll2Clk));
rt_kprintf("Audio PLLCLK : %d\n", CLOCK_GetFreq(kCLOCK_AudioPllClk));
rt_kprintf("Video PLLCLK : %d\n", CLOCK_GetFreq(kCLOCK_VideoPllClk));
rt_kprintf("OSC clock : %d\n", CLOCK_GetFreq(kCLOCK_OscClk));
rt_kprintf("RTC clock : %d\n", CLOCK_GetFreq(kCLOCK_RtcClk));
rt_kprintf("CPU clock: %d\n", CLOCK_GetFreq(kCLOCK_CpuClk));
rt_kprintf("AHB clock : %d\n", CLOCK_GetFreq(kCLOCK_AhbClk));
rt_kprintf("SEMC clock : %d\n", CLOCK_GetFreq(kCLOCK_SemcClk));
rt_kprintf("IPG clock : %d\n", CLOCK_GetFreq(kCLOCK_IpgClk));
rt_kprintf("ARMPLLCLK(PLL1) : %d\n", CLOCK_GetFreq(kCLOCK_ArmPllClk));
rt_kprintf("SYSPLLCLK(PLL2/528_PLL) : %d\n", CLOCK_GetFreq(kCLOCK_SysPllClk));
rt_kprintf("SYSPLLPDF0CLK : %d\n", CLOCK_GetFreq(kCLOCK_SysPllPfd0Clk));
rt_kprintf("SYSPLLPFD1CLK : %d\n", CLOCK_GetFreq(kCLOCK_SysPllPfd1Clk));
rt_kprintf("SYSPLLPFD2CLK : %d\n", CLOCK_GetFreq(kCLOCK_SysPllPfd2Clk));
rt_kprintf("SYSPLLPFD3CLK : %d\n", CLOCK_GetFreq(kCLOCK_SysPllPfd3Clk));
rt_kprintf("USB1PLLCLK(PLL3) : %d\n", CLOCK_GetFreq(kCLOCK_Usb1PllClk));
rt_kprintf("USB1PLLPDF0CLK : %d\n", CLOCK_GetFreq(kCLOCK_Usb1PllPfd0Clk));
rt_kprintf("USB1PLLPFD1CLK : %d\n", CLOCK_GetFreq(kCLOCK_Usb1PllPfd1Clk));
rt_kprintf("USB1PLLPFD2CLK : %d\n", CLOCK_GetFreq(kCLOCK_Usb1PllPfd2Clk));
rt_kprintf("USB1PLLPFD3CLK : %d\n", CLOCK_GetFreq(kCLOCK_Usb1PllPfd3Clk));
rt_kprintf("Audio PLLCLK(PLL4) : %d\n", CLOCK_GetFreq(kCLOCK_AudioPllClk));
rt_kprintf("Video PLLCLK(PLL5) : %d\n", CLOCK_GetFreq(kCLOCK_VideoPllClk));
rt_kprintf("Enet PLLCLK ref_enetpll0 : %d\n", CLOCK_GetFreq(kCLOCK_EnetPll0Clk));
rt_kprintf("Enet PLLCLK ref_enetpll1 : %d\n", CLOCK_GetFreq(kCLOCK_EnetPll1Clk));
rt_kprintf("Enet PLLCLK ref_enetpll2 : %d\n", CLOCK_GetFreq(kCLOCK_EnetPll2Clk));
rt_kprintf("USB2PLLCLK(PLL7) : %d\n", CLOCK_GetFreq(kCLOCK_Usb2PllClk));
}
void dump_cc_info(void)
......
bsp/imxrt1052-evk/drivers/SConscript
浏览文件 @ 161778df
......@@ -8,35 +8,42 @@ cwd = os.path.join(str(Dir('#')), 'drivers')
src = Split("""
board.c
drv_uart.c
hyper_flash_boot.c
drv_sdram.c
""")
CPPPATH = [cwd]
CPPDEFINES = []
# add sdram driver code
if GetDepend('RT_USING_SDRAM'):
src = src + ['./drv_sdram.c']
if GetDepend('RT_USING_PIN'):
src += ['drv_pin.c']
if GetDepend('RT_USING_HP_RTC'):
src += ['drv_hp_rtc.c']
if GetDepend('RT_USING_LWIP'):
src += ['drv_eth.c', 'fsl_phy.c']
CPPDEFINES += ['FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE']
if GetDepend('RT_USING_SDIO'):
src += ['drv_sdio.c']
if GetDepend('RT_USING_USB_DEVICE'):
src += Glob('usb/phy/*.c')
CPPDEFINES += ['ENDIANNESS']
if GetDepend('RT_USING_USB_DEVICE'):
src += ['drv_usbd.c']
src += Glob('usb/device/*.c')
if GetDepend('RT_USING_RTGUI') or GetDepend('PKG_USING_GUIENGINE'):
src += ['drv_lcd.c', 'drv_ft5406.c', 'drv_i2c.c']
# add rtc driver code
if GetDepend('RT_USING_RTC_HP'):
src = src + ['./drv_rtc.c']
if GetDepend('BOARD_RT1050_EVK'):
src += ['hyper_flash_boot.c']
if GetDepend('RT_USING_LWIP'):
src += ['drv_eth.c', 'fsl_phy.c']
CPPDEFINES += ['FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE']
if GetDepend('RT_USING_SDIO'):
src += ['drv_sdio.c']
if GetDepend('RT_USING_USB_DEVICE'):
src += Glob('usb/phy/*.c')
CPPDEFINES += ['ENDIANNESS']
if GetDepend('RT_USING_USB_DEVICE'):
src += ['drv_usbd.c']
src += Glob('usb/device/*.c')
if GetDepend('RT_USING_RTGUI') or GetDepend('PKG_USING_GUIENGINE'):
src += ['drv_lcd.c', 'drv_ft5406.c', 'drv_i2c.c']
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES=CPPDEFINES)
......
bsp/imxrt1052-evk/drivers/board.c
浏览文件 @ 161778df
......@@ -18,7 +18,9 @@
#include "board.h"
#include "drv_uart.h"
#if defined(RT_USING_SDRAM) && defined(RT_USING_MEMHEAP_AS_HEAP)
static struct rt_memheap system_heap;
#endif
/* ARM PLL configuration for RUN mode */
const clock_arm_pll_config_t armPllConfig = { .loopDivider = 100U };
......@@ -162,12 +164,14 @@ void rt_lowlevel_init(void)
{
BOARD_ConfigMPU();
#if defined(RT_USING_SDRAM)
extern int imxrt_sdram_init(void);
imxrt_sdram_init();
#endif
}
/**
* This function will initial LPC8XX board.
* This function will initial rt1050 board.
*/
void rt_hw_board_init()
{
......@@ -184,11 +188,18 @@ void rt_hw_board_init()
#endif
#ifdef RT_USING_HEAP
rt_kprintf("sdram heap, begin: 0x%p, end: 0x%p\n", SDRAM_BEGIN, SDRAM_END);
rt_system_heap_init((void*)SDRAM_BEGIN, (void*)SDRAM_END);
rt_kprintf("sram heap, begin: 0x%p, end: 0x%p\n", HEAP_BEGIN, HEAP_END);
rt_memheap_init(&system_heap, "sram", (void *)HEAP_BEGIN, HEAP_SIZE);
#if defined(RT_USING_SDRAM) && defined(RT_USING_MEMHEAP_AS_HEAP)
rt_kprintf("sdram heap, begin: 0x%p, end: 0x%p\n", SDRAM_BEGIN, SDRAM_END);
rt_system_heap_init((void *)SDRAM_BEGIN, (void*)SDRAM_END);
rt_kprintf("sram heap, begin: 0x%p, end: 0x%p\n", HEAP_BEGIN, HEAP_END);
rt_memheap_init(&system_heap, "sram", (void *)HEAP_BEGIN, HEAP_SIZE);
#else
rt_kprintf("sram heap, begin: 0x%p, end: 0x%p\n", HEAP_BEGIN, HEAP_END);
rt_system_heap_init((void *)HEAP_BEGIN, (void*)HEAP_END);
#endif
#endif
}
......
bsp/imxrt1052-evk/drivers/drv_hp_rtc.c → bsp/imxrt1052-evk/drivers/drv_rtc.c
浏览文件 @ 161778df
/*
* File : drv_hp_rtc.c
* File : drv_rtc.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006-2013, RT-Thread Development Team
*
......@@ -11,11 +11,12 @@
* Date Author Notes
* 2018-03-15 Liuguang the first version.
*/
#include "drv_hp_rtc.h"
#include <time.h>
#include "drv_rtc.h"
#include "fsl_common.h"
#include "fsl_snvs_hp.h"
#include "fsl_snvs_lp.h"
#include <time.h>
#ifdef RT_USING_RTC
......@@ -35,7 +36,7 @@ static time_t get_timestamp(void)
tm_new.tm_hour = rtcDate.hour;
tm_new.tm_mday = rtcDate.day;
tm_new.tm_mon = rtcDate.month - 1;
tm_new.tm_mon = rtcDate.month - 1;
tm_new.tm_year = rtcDate.year - 1900;
return mktime(&tm_new);
......
bsp/imxrt1052-evk/drivers/drv_hp_rtc.h → bsp/imxrt1052-evk/drivers/drv_rtc.h
浏览文件 @ 161778df
/*
* File : drv_hp_rtc.h
* File : drv_rtc.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006-2013, RT-Thread Development Team
*
......
bsp/imxrt1052-evk/project.uvoptx
浏览文件 @ 161778df
此差异已折叠。
bsp/imxrt1052-evk/project.uvprojx
浏览文件 @ 161778df
此差异已折叠。
bsp/imxrt1052-evk/rtconfig.h
浏览文件 @ 161778df
......@@ -8,9 +8,7 @@
#define RT_NAME_MAX 8
#define RT_ALIGN_SIZE 4
/* RT_THREAD_PRIORITY_8 is not set */
#define RT_THREAD_PRIORITY_32
/* RT_THREAD_PRIORITY_256 is not set */
#define RT_THREAD_PRIORITY_MAX 32
#define RT_TICK_PER_SECOND 100
#define RT_DEBUG
......@@ -19,7 +17,6 @@
#define RT_DEBUG_THREAD 0
#define RT_USING_HOOK
#define IDLE_THREAD_STACK_SIZE 256
/* RT_USING_TIMER_SOFT is not set */
/* Inter-Thread communication */
......@@ -28,26 +25,19 @@
#define RT_USING_EVENT
#define RT_USING_MAILBOX
#define RT_USING_MESSAGEQUEUE
/* RT_USING_SIGNALS is not set */
/* Memory Management */
/* RT_USING_MEMPOOL is not set */
#define RT_USING_MEMHEAP
/* RT_USING_NOHEAP is not set */
/* RT_USING_SMALL_MEM is not set */
/* RT_USING_SLAB is not set */
#define RT_USING_MEMHEAP_AS_HEAP
#define RT_USING_HEAP
/* Kernel Device Object */
#define RT_USING_DEVICE
/* RT_USING_INTERRUPT_INFO is not set */
#define RT_USING_CONSOLE
#define RT_CONSOLEBUF_SIZE 128
#define RT_CONSOLE_DEVICE_NAME "uart1"
/* RT_USING_MODULE is not set */
#define ARCH_ARM
#define ARCH_ARM_CORTEX_M
#define ARCH_ARM_CORTEX_M7
......@@ -60,7 +50,6 @@
/* C++ features */
/* RT_USING_CPLUSPLUS is not set */
/* Command shell */
......@@ -73,10 +62,8 @@
#define FINSH_THREAD_PRIORITY 20
#define FINSH_THREAD_STACK_SIZE 4096
#define FINSH_CMD_SIZE 80
/* FINSH_USING_AUTH is not set */
#define FINSH_USING_MSH
#define FINSH_USING_MSH_DEFAULT
/* FINSH_USING_MSH_ONLY is not set */
/* Device virtual file system */
......@@ -91,67 +78,38 @@
#define RT_DFS_ELM_CODE_PAGE 437
#define RT_DFS_ELM_WORD_ACCESS
/* RT_DFS_ELM_USE_LFN_0 is not set */
/* RT_DFS_ELM_USE_LFN_1 is not set */
/* RT_DFS_ELM_USE_LFN_2 is not set */
#define RT_DFS_ELM_USE_LFN_3
#define RT_DFS_ELM_USE_LFN 3
#define RT_DFS_ELM_MAX_LFN 255
#define RT_DFS_ELM_DRIVES 2
#define RT_DFS_ELM_MAX_SECTOR_SIZE 512
/* RT_DFS_ELM_USE_ERASE is not set */
#define RT_DFS_ELM_REENTRANT
#define RT_USING_DFS_DEVFS
/* RT_USING_DFS_NET is not set */
/* RT_USING_DFS_ROMFS is not set */
/* RT_USING_DFS_RAMFS is not set */
/* RT_USING_DFS_UFFS is not set */
/* RT_USING_DFS_JFFS2 is not set */
/* RT_USING_DFS_NFS is not set */
/* Device Drivers */
#define RT_USING_DEVICE_IPC
#define RT_USING_SERIAL
/* RT_USING_CAN is not set */
/* RT_USING_HWTIMER is not set */
/* RT_USING_CPUTIME is not set */
#define RT_USING_I2C
#define RT_USING_I2C_BITOPS
#define RT_USING_PIN
/* RT_USING_MTD_NOR is not set */
/* RT_USING_MTD_NAND is not set */
#define RT_USING_RTC
/* RT_USING_SOFT_RTC is not set */
/* RTC_SYNC_USING_NTP is not set */
#define RT_USING_SDIO
/* RT_USING_SPI is not set */
/* RT_USING_WDT is not set */
/* RT_USING_WIFI is not set */
/* Using USB */
/* RT_USING_USB_HOST is not set */
/* RT_USING_USB_DEVICE is not set */
/* POSIX layer and C standard library */
#define RT_USING_LIBC
/* RT_USING_PTHREADS is not set */
/* RT_USING_POSIX is not set */
/* HAVE_SYS_SIGNALS is not set */
/* Network stack */
/* light weight TCP/IP stack */
#define RT_USING_LWIP
/* RT_USING_LWIP141 is not set */
#define RT_USING_LWIP202
/* RT_USING_LWIP_IPV6 is not set */
/* RT_LWIP_IGMP is not set */
#define RT_LWIP_ICMP
/* RT_LWIP_SNMP is not set */
#define RT_LWIP_DNS
#define RT_LWIP_DHCP
#define IP_SOF_BROADCAST 1
......@@ -164,8 +122,6 @@
#define RT_LWIP_MSKADDR "255.255.255.0"
#define RT_LWIP_UDP
#define RT_LWIP_TCP
/* RT_LWIP_RAW is not set */
/* RT_LWIP_PPP is not set */
#define RT_MEMP_NUM_NETCONN 8
#define RT_LWIP_PBUF_NUM 16
#define RT_LWIP_RAW_PCB_NUM 4
......@@ -180,33 +136,24 @@
#define RT_LWIP_ETHTHREAD_PRIORITY 12
#define RT_LWIP_ETHTHREAD_STACKSIZE 1024
#define RT_LWIP_ETHTHREAD_MBOX_SIZE 8
/* RT_LWIP_REASSEMBLY_FRAG is not set */
#define LWIP_NETIF_STATUS_CALLBACK 1
#define SO_REUSE 1
#define LWIP_SO_RCVTIMEO 1
#define LWIP_SO_SNDTIMEO 1
#define LWIP_SO_RCVBUF 1
/* RT_LWIP_NETIF_LOOPBACK is not set */
#define LWIP_NETIF_LOOPBACK 0
/* Modbus master and slave stack */
/* RT_USING_MODBUS is not set */
/* LWIP_USING_DHCPD is not set */
/* VBUS(Virtual Software BUS) */
/* RT_USING_VBUS is not set */
/* Utilities */
/* RT_USING_LOGTRACE is not set */
/* RT_USING_RYM is not set */
/* ARM CMSIS */
/* RT_USING_CMSIS_OS is not set */
/* RT_USING_RTT_CMSIS is not set */
/* RT-Thread online packages */
......@@ -214,72 +161,44 @@
/* RT-Thread GUI Engine */
/* PKG_USING_GUIENGINE is not set */
/* PKG_USING_PERSIMMON is not set */
/* PKG_USING_LWEXT4 is not set */
/* PKG_USING_PARTITION is not set */
/* PKG_USING_SQLITE is not set */
/* PKG_USING_RTI is not set */
/* IoT - internet of things */
/* PKG_USING_PAHOMQTT is not set */
/* PKG_USING_WEBCLIENT is not set */
/* PKG_USING_MONGOOSE is not set */
/* PKG_USING_WEBTERMINAL is not set */
/* PKG_USING_CJSON is not set */
/* PKG_USING_LJSON is not set */
/* PKG_USING_EZXML is not set */
/* PKG_USING_NANOPB is not set */
/* PKG_USING_GAGENT_CLOUD is not set */
/* Wi-Fi */
/* Marvell WiFi */
/* PKG_USING_WLANMARVELL is not set */
/* Wiced WiFi */
/* PKG_USING_WLAN_WICED is not set */
/* PKG_USING_COAP is not set */
/* PKG_USING_NOPOLL is not set */
/* PKG_USING_NETUTILS is not set */
/* security packages */
/* PKG_USING_MBEDTLS is not set */
/* PKG_USING_libsodium is not set */
/* PKG_USING_TINYCRYPT is not set */
/* language packages */
/* PKG_USING_JERRYSCRIPT is not set */
/* PKG_USING_MICROPYTHON is not set */
/* multimedia packages */
/* PKG_USING_OPENMV is not set */
/* tools packages */
/* PKG_USING_CMBACKTRACE is not set */
/* PKG_USING_EASYLOGGER is not set */
/* PKG_USING_SYSTEMVIEW is not set */
/* PKG_USING_IPERF is not set */
/* miscellaneous packages */
/* PKG_USING_FASTLZ is not set */
/* PKG_USING_MINILZO is not set */
/* PKG_USING_QUICKLZ is not set */
/* example package: hello */
/* PKG_USING_HELLO is not set */
/* PKG_USING_MULTIBUTTON is not set */
#define SOC_IMXRT1052
#define BOARD_RT1050_EVK
/* RT1050_EVK Bsp Config */
/* Select uart device */
#define RT_USING_UART1
#define RT_USING_HP_RTC
#define RT_USING_SDRAM
#define RT_USING_RTC_HP
#endif
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或