unary.cc

/* Copyright (c) 2021 PaddlePaddle Authors. All Rights Reserved.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License. */

// See Note [ Why still include the fluid headers? ]
#include "paddle/pten/infermeta/unary.h"
#include <set>

namespace pten {

DenseTensorMeta UnchangedInferMeta(const DenseTensorMeta& x_meta) {
  return x_meta;
}

DenseTensorMeta ReductionInferMeta(const DenseTensorMeta& x_meta) {
  const auto& out_dims = paddle::framework::make_ddim({1});
  DenseTensorMeta return_meta(x_meta.dtype, out_dims, x_meta.layout);
  return return_meta;
}

DenseTensorMeta FlattenInferMeta(const DenseTensorMeta& x_meta,
                                 int start_axis,
                                 int stop_axis) {
  auto& x_dims = x_meta.dims;
  int in_dims_size = x_dims.size();
  if (start_axis < 0) {
    start_axis = start_axis + in_dims_size;
  }
  if (stop_axis < 0) {
    stop_axis = stop_axis + in_dims_size;
  }
  PADDLE_ENFORCE_GE(stop_axis,
                    start_axis,
                    paddle::platform::errors::InvalidArgument(
                        "The stop_axis should be greater"
                        "than or equal to start_axis."));

  int64_t outer = 1;
  std::vector<int32_t> out_shape;
  out_shape.reserve(in_dims_size - stop_axis + start_axis);

  for (int i = 0; i < start_axis; ++i) {
    out_shape.push_back(x_dims[i]);
  }
  for (int i = start_axis; i <= stop_axis; i++) {
    if (x_dims[i] == -1 || outer == -1) {
      outer = -1;
    } else {
      outer *= x_dims[i];
    }
  }
  out_shape.push_back(outer);
  for (int i = stop_axis + 1; i < in_dims_size; i++) {
    out_shape.push_back(x_dims[i]);
  }
  const auto& out_dims = paddle::framework::make_ddim(out_shape);
  DenseTensorMeta return_meta(x_meta.dtype, out_dims, x_meta.layout);

  if (x_dims[0] == return_meta.dims[0]) {
    // Only pass LoD when the first dimension of output and Input(X)
    // are the same.
    return_meta.lod = x_meta.lod;
  }

  return return_meta;
}

DenseTensorMeta CastInferMeta(const DenseTensorMeta& x_meta,
                              const DataType out_dtype) {
  DenseTensorMeta out_meta(out_dtype, x_meta.dims, x_meta.layout);
  return out_meta;
}

DenseTensorMeta FullLikeInferMeta(const DenseTensorMeta& x_meta,
                                  DataType dtype,
                                  DataLayout layout) {
  return {dtype == DataType::UNDEFINED ? x_meta.dtype : dtype,
          x_meta.dims,
          layout == DataLayout::UNDEFINED ? x_meta.layout : layout};
}

static paddle::framework::DDim ValidateShape(
    const std::vector<int64_t> shape, const paddle::framework::DDim& in_dims) {
  const int64_t in_size = paddle::framework::product(in_dims);
  auto in_dims_vec = paddle::framework::vectorize(in_dims);
  bool all_positive = std::all_of(in_dims_vec.cbegin(),
                                  in_dims_vec.cend(),
                                  [](int64_t i) { return i > 0; });
  // only one dimension can be set to -1, whose size will be automatically
  // infered.
  const int64_t unk_dim_val = -1;
  const int64_t copy_dim_val = 0;

  std::vector<int64_t> output_shape(shape.size(), 0);
  int64_t capacity = 1;
  int unk_dim_idx = -1;
  for (size_t i = 0; i < shape.size(); ++i) {
    if (shape[i] == unk_dim_val) {
      PADDLE_ENFORCE_EQ(
          unk_dim_idx,
          -1,
          paddle::platform::errors::InvalidArgument(
              "Only one dimension value of 'shape' in ReshapeOp can "
              "be -1. But received shape = [%s], shape[%d] is also -1.",
              paddle::framework::make_ddim(shape),
              i));
      unk_dim_idx = i;
    } else if (shape[i] == copy_dim_val) {
      PADDLE_ENFORCE_LT(
          static_cast<int>(i),
          in_dims.size(),
          paddle::platform::errors::InvalidArgument(
              "The index of 0 in `shape` must be less than "
              "the input tensor X's dimensions. "
              "But received shape = [%s], shape[%d] = 0, X's shape = [%s], "
              "X's dimensions = %d.",
              paddle::framework::make_ddim(shape),
              i,
              in_dims,
              in_dims.size()));
    } else {
      PADDLE_ENFORCE_GT(
          shape[i],
          0,
          paddle::platform::errors::InvalidArgument(
              "Each dimension value of 'shape' in ReshapeOp must not "
              "be negative except one unknown dimension. "
              "But received  shape = [%s], shape[%d] = %d.",
              paddle::framework::make_ddim(shape),
              i,
              shape[i]));
    }

    // NOTE all non-zero values will be converted to True (include negative
    // value)
    capacity *= (shape[i] ? shape[i] : in_dims[i]);
    output_shape[i] = (shape[i] ? static_cast<int64_t>(shape[i]) : in_dims[i]);
  }

  if (unk_dim_idx != -1) {
    if (all_positive) {
      // in_size < 0 and is un-determinate in compile time, skip the check,
      // for example, in_dims = [-1, 8, 1, 1], shape = [-1, 3, 8],
      // capacity = -24, in_size = -8, output_shape[0] = 0
      // the following check will fail.
      output_shape[unk_dim_idx] = -in_size / capacity;
      PADDLE_ENFORCE_EQ(
          output_shape[unk_dim_idx] * capacity,
          -in_size,
          paddle::platform::errors::InvalidArgument(
              "The 'shape' attribute in ReshapeOp is invalid. "
              "The input tensor X'size must be divisible by known "
              "capacity of 'shape'. "
              "But received X's shape = [%s], X's size = %d, "
              "'shape' is [%s], known capacity of 'shape' is %d.",
              in_dims,
              in_size,
              paddle::framework::make_ddim(shape),
              capacity));
    } else {
      output_shape[unk_dim_idx] = -1;
    }
  } else {
    if (all_positive) {
      PADDLE_ENFORCE_EQ(
          capacity,
          in_size,
          paddle::platform::errors::InvalidArgument(
              "The 'shape' in ReshapeOp is invalid. "
              "The input tensor X'size must be equal to the capacity of "
              "'shape'. "
              "But received X's shape = [%s], X's size = %d, 'shape' is "
              "[%s], the capacity of 'shape' is %d.",
              in_dims,
              in_size,
              paddle::framework::make_ddim(shape),
              capacity));
    }
  }

  // support reshape with zero-input(input tensor with product(shape) == 0)
  // by now we require that if the input tensor is zero shape, the target
  // shape of output must be zero
  if (in_size == 0) {
    PADDLE_ENFORCE_LE(
        capacity,
        in_size,
        paddle::platform::errors::InvalidArgument(
            "The 'shape' in ReshapeOp is invalid. "
            "The input tensor X's shape = [%s], X's capacity = %d."
            "But the target shape of Out is [%s],  the "
            "capacity of 'Out' is %d.",
            in_dims,
            in_size,
            paddle::framework::make_ddim(shape),
            capacity));
  }

  return paddle::framework::make_ddim(output_shape);
}

DenseTensorMeta InferMetaFromVecValue(const DenseTensorMeta& x_meta,
                                      const std::vector<int64_t>& shape) {
  PADDLE_ENFORCE_EQ(!shape.empty(),
                    true,
                    paddle::platform::errors::InvalidArgument(
                        "The parameter 'shape' in ReshapeOp must be set. "
                        "But received 'shape' is empty."));
  auto x_dims = x_meta.dims;
  auto out_dims = ValidateShape(shape, x_dims);
  DenseTensorMeta return_meta(x_meta.dtype, out_dims, x_meta.layout);
  if (x_dims[0] == return_meta.dims[0]) {
    // Only pass LoD when the first dimension of output and Input(X)
    // are the same.
    return_meta.lod = x_meta.lod;
  }
  return return_meta;
}

DenseTensorMeta ReshapeInferMeta(const DenseTensorMeta& x_meta,
                                 const ScalarArray& shape) {
  return InferMetaFromVecValue(x_meta, shape.GetData());
}

DenseTensorMeta ReduceInferMeta(const DenseTensorMeta& x_meta,
                                const std::vector<int64_t>& axis,
                                bool keep_dim,
                                DataType dtype) {
  bool reduce_all = true;
  std::set<int64_t> dims_set(axis.begin(), axis.end());
  for (int64_t i = 0; i < x_meta.dims.size(); ++i) {
    if (dims_set.find(i) == dims_set.end()) {
      reduce_all = false;
      break;
    }
  }

  std::vector<int64_t> out_dim_vector;
  if (keep_dim) {
    for (int64_t i = 0; i < x_meta.dims.size(); ++i) {
      if (reduce_all || dims_set.find(i) != dims_set.end()) {
        out_dim_vector.push_back(1);
      } else {
        out_dim_vector.push_back(x_meta.dims.at(i));
      }
    }
  } else {
    for (int64_t i = 0; i < x_meta.dims.size(); ++i) {
      if (reduce_all || dims_set.find(i) != dims_set.end()) {
        continue;
      } else {
        out_dim_vector.push_back(x_meta.dims.at(i));
      }
    }

    if (out_dim_vector.size() == 0) {
      out_dim_vector.push_back(1);
    }
  }
  DDim out_dim = paddle::framework::make_ddim(out_dim_vector);

  DataType out_dtype;
  if (dtype != DataType::UNDEFINED) {
    out_dtype = dtype;
  } else {
    if (x_meta.dtype == DataType::BOOL || x_meta.dtype == DataType::INT32 ||
        x_meta.dtype == DataType::INT64) {
      out_dtype = DataType::INT64;
    } else {
      out_dtype = x_meta.dtype;
    }
  }

  DenseTensorMeta return_meta(out_dtype, out_dim, x_meta.layout);
  return return_meta;
}

}  // namespace pten