io.py

# Copyright (c) 2020 PaddlePaddle Authors. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

from __future__ import print_function

import os
import six
import pickle
import numpy as np

from paddle import compat as cpt
from paddle.fluid import core
from paddle.fluid import framework
from paddle.fluid import backward
from paddle.fluid import unique_name
from paddle.fluid.dygraph import layers
from paddle.fluid.layers import nn
from paddle.fluid.dygraph.base import switch_to_static_graph

__all__ = ['TranslatedLayer']

VARIABLE_FILENAME = "__variables__"
EXTRA_VAR_INFO_FILENAME = "__variables.info__"
LOADED_VAR_SUFFIX = "load"
PARAMETER_NAME_PREFIX = "param"
BUFFER_NAME_PREFIX = "buffer"


def _load_program_desc(model_file_path):
    # 1. parse program desc
    with open(model_file_path, "rb") as f:
        program_desc_str = f.read()

    program_desc = core.ProgramDesc(program_desc_str)
    if not core._is_program_version_supported(program_desc._version()):
        raise ValueError("Unsupported program version: %d\n" %
                         program_desc._version())

    return program_desc


def _is_persistable(var_desc):
    if var_desc.type() == core.VarDesc.VarType.FEED_MINIBATCH or \
            var_desc.type() == core.VarDesc.VarType.FETCH_LIST or \
            var_desc.type() == core.VarDesc.VarType.READER or \
            var_desc.type() == core.VarDesc.VarType.RAW:
        return False
    return var_desc.persistable()


def _is_parameter(persistable_var_desc, program_desc):
    # 1. firstly, param should be input of op
    input_ops = []  # op can be repeated
    for block_idx in six.moves.range(program_desc.num_blocks()):
        block = program_desc.block(block_idx)
        for op_idx in six.moves.range(block.op_size()):
            op = block.op(op_idx)
            # NOTE: parameter is the input of a certain op
            if persistable_var_desc.name() in op.input_arg_names():
                input_ops.append(op)
    # 2. secondly, param should not be output of op or be same op's output
    for block_idx in six.moves.range(program_desc.num_blocks()):
        block = program_desc.block(block_idx)
        for op_idx in six.moves.range(block.op_size()):
            op = block.op(op_idx)
            if persistable_var_desc.name() in op.output_arg_names():
                # such as batch_norm_op
                if op in input_ops:
                    continue
                else:
                    return False
    return True


def _get_persistable_vars(program_desc):
    persistable_vars = []
    for i in six.moves.range(program_desc.num_blocks()):
        block = program_desc.block(i)
        persistable_vars.extend(list(filter(_is_persistable, block.all_vars())))
    return persistable_vars


def _get_persistable_var_names(program_desc):
    """
    Get all persistable variable names in ProgramDesc.
    """
    var_names = []
    persistable_vars = _get_persistable_vars(program_desc)
    for var in persistable_vars:
        var_names.append(var.name())
    return var_names


def _get_all_var_names(program_desc):
    all_var_names = set()
    for i in six.moves.range(program_desc.num_blocks()):
        block = program_desc.block(i)
        for var in block.all_vars():
            all_var_names.add(var.name())
    return all_var_names


@switch_to_static_graph
def _append_loaded_suffix(name):
    """
    Append loaded suffix to the given variable name
    e.g. x ==> x.load_0, x.load_0 ==> x.load_0.load_0
    """
    suffix = LOADED_VAR_SUFFIX
    name = cpt.to_text(name)
    new_name = unique_name.generate_with_ignorable_key('.'.join((name, suffix)))
    return new_name


@switch_to_static_graph
def _generate_unique_var_name(prefix):
    return unique_name.generate_with_ignorable_key(prefix)


def _append_loaded_suffix_to_var(program_desc):
    suffix_varname_dict = dict()
    persistable_vars = _get_persistable_vars(program_desc)
    for var_desc in persistable_vars:
        old_name = var_desc.name()
        new_name = _append_loaded_suffix(var_desc.name())
        suffix_varname_dict[new_name] = old_name
        var_desc.set_name(new_name)
        for block_idx in six.moves.range(program_desc.num_blocks()):
            block = program_desc.block(block_idx)
            for op_idx in six.moves.range(block.op_size()):
                op = block.op(op_idx)
                op._rename_input(old_name, new_name)
                op._rename_output(old_name, new_name)
    return suffix_varname_dict


@switch_to_static_graph
def _build_program_by_desc(program_desc):
    prog = framework.Program()
    prog.desc = program_desc
    prog.blocks = [
        framework.Block(prog, i)
        for i in six.moves.range(prog.desc.num_blocks())
    ]
    prog._sync_with_cpp()
    return prog


def _change_is_test_status(program_desc, is_test):
    # change all `is_test` attributes
    for i in six.moves.range(program_desc.num_blocks()):
        block = program_desc.block(i)
        for j in six.moves.range(block.op_size()):
            op = block.op(j)
            if op.has_attr('is_test'):
                op._set_attr('is_test', is_test)


class _ProgramHolder(object):
    """
    Holds the execution information of a Program.

    _ProgramHolder is the execution unit of TranslatedLayer, 
    if TranslatedLayer contains multiple _ProgramHolder, 
    it can execute multiple methods

    _ProgramHolder is an internal concept.
    """

    def __init__(self, program_desc):
        super(_ProgramHolder, self).__init__()

        # input, output, persistable var info
        self._input_names = []
        self._persistable_names = []
        self._output_descs = []

        # execution scope
        self._inner_scope = core.Scope()

        # append suffix var name dict
        self._suffix_varname_dict = None

        # forward program
        self._infer_program_desc = self._preprocess(program_desc)
        # forward + backward program
        self._train_program_desc = self._append_backward_desc(
            self._infer_program_desc)

    @property
    def infer_program(self):
        return self._infer_program_desc

    @property
    def train_program(self):
        return self._train_program_desc

    @property
    def input_names(self):
        return self._input_names

    @property
    def output_decs(self):
        return self._output_descs

    @property
    def persistable_names(self):
        return self._persistable_names

    @property
    def scope(self):
        return self._inner_scope

    def _preprocess(self, program_desc):
        # 1. Prune original program
        # remove feed, fetch and scale-1 op, remove op_callstack attr
        ops_to_remove = []
        root_block = program_desc.block(0)
        for i in six.moves.range(root_block.op_size()):
            op = root_block.op(i)
            if op.type() == 'feed':
                ops_to_remove.append(i)
                feed_var_name = cpt.to_bytes(op.input('X')[0])
                root_block._remove_var(feed_var_name)
                self._input_names.append(cpt.to_bytes(op.output('Out')[0]))
            elif op.type() == 'scale' and op.output('Out')[0].startswith(
                    'save_infer_model/scale_'):
                ops_to_remove.append(i)
                out_var_name = cpt.to_bytes(op.output('Out')[0])
                root_block._remove_var(out_var_name)
                self._output_descs.append(
                    root_block.find_var(cpt.to_bytes(op.input('X')[0])))
            elif op.type() == 'fetch':
                ops_to_remove.append(i)
                fetch_var_name = cpt.to_bytes(op.output('Out')[0])
                root_block._remove_var(fetch_var_name)
                # NOTE: some old pre-train models have no extra scale_op
                if not op.input('X')[0].startswith('save_infer_model/scale_'):
                    self._output_descs.append(
                        root_block.find_var(cpt.to_bytes(op.input('X')[0])))
            else:
                if op.has_attr("op_callstack"):
                    op.remove_attr("op_callstack")

        for op_idx in reversed(ops_to_remove):
            root_block._remove_op(op_idx, op_idx + 1)

        # 2. Input processing, reverse feed vars
        self._input_names.reverse()

        # 3. Output processing, add scale for outputs
        tmp_program = _build_program_by_desc(program_desc)
        # NOTE: [why need append scale for outputs]
        # When dealing with some more complex pre-training models, there 
        # will be situations where the pre-training model has multiple 
        # fetch outputs. In the scenario of multiple fetch outputs, 
        # there is a special case where multiple outputs of the model 
        # may be on the same branch. According to the user's subsequent 
        # use, multiple outputs may be associated with multiple branches.
        # These subsequent operations are added in TranslatedLayer is 
        # agnostic during initialization, which results in subsequent 
        # gradient accumulation operations that are required on the 
        # output node in the middle of the branch will not be performed, 
        # resulting in error, details see pull request:
        # [https://github.com/PaddlePaddle/Paddle/pull/24627]
        self._append_scale_to_output(tmp_program)

        # 4. Persistable vars processing
        # - append loaded suffix to persistable vars
        # NOTE: [why need to append suffix to persistable vars]
        # Dygraph and static graph mode use the same naming mechanism. 
        # If users want to load the model fine-tune, it is possible 
        # to add the existing Layer in the loaded model to enhance 
        # the network. For example, the original saved model has linear, 
        # and later after loading, a new linear is added. At this time, 
        # there will be a problem of duplicate names, so here is unified 
        # to add the LOADED suffix to the parameters of the model loaded
        self._suffix_varname_dict = _append_loaded_suffix_to_var(program_desc)
        # - get persistable var
        self._persistable_names = _get_persistable_var_names(program_desc)

        return program_desc

    @switch_to_static_graph
    def _append_scale_to_output(self, program):
        # 1. append scale & save var
        scale_output_vars = []
        with framework.program_guard(program):
            for i, out in enumerate(self._output_descs):
                var = program.global_block().var(out.name())
                var = nn.scale(
                    var, 1., name="translated_layer/scale_{}".format(i))
                scale_output_vars.append(var)
        # 2. update output names & descs
        for i, var in enumerate(scale_output_vars):
            self._output_descs[i] = var.desc

    @switch_to_static_graph
    def _append_backward_desc(self, infer_program_desc):
        program_desc_copy = core.ProgramDesc(infer_program_desc)

        # 1. set all `is_test` attributes to False
        _change_is_test_status(program_desc_copy, False)

        # 2. prepare program and related var
        # NOTE: To reuse backward interfaces, build Program firstly.
        # Originally, there is no need to build a program, but need to almost
        # rewrite a series of methods for append_backward for program_desc. 
        # Therefore, in order to reuse the method of backward.py, build the program here.
        program = _build_program_by_desc(program_desc_copy)

        targets = []
        for out in self._output_descs:
            targets.append(program.global_block().var(out.name()))

        # 3. append backward
        backward.gradients(targets=targets, inputs=[])
        return program.desc


# [ TranslatedLayer : Run program in imperative mode ]
# 
# DESIGN IDEA: using an special operator `RunProgram`, execute program inside operator.
#
# Op's Inputs:
#   - the input variable of the user feed
#   - the necessary parameters of the network
# Op's Outputs:
#   - the output variable of fetch
# 
# This op receives a complete program desc, internally creates scope
# and executor, executes this program. Key points:
#
# 1. Data Sharing: 
#   The varBase of the dynamic graph is not in the scope, so before the op
#   executes the program internally, create persistent variables with the
#   same name as feed, parameters, and fetch in the scope, and share the
#   LoDTensor of the op input.
# 
# 2. Forward and Backward Separation:
#   Because the dynamic graph op performs the forward and backward separately,
#   in the forward op RunProgram, we only execute the forward part of whole program,
#   and in the backward op RunProgramGrad, we execute the backward part of program.
#   We can not separate the program into forward and backward part, which will 
#   make some control flow execution logic wrong.


# NOTE: [compatible] deal with model saved by save_inference_model,
# which need get var info from program desc
def _load_persistable_vars_by_program(model_path,
                                      program_holder,
                                      params_filename=None):
    # make sure the path has been checked
    persistable_vars = _get_persistable_vars(program_holder.infer_program)
    load_var_dict = {}
    for each_var in persistable_vars:
        orig_each_name = program_holder._suffix_varname_dict[each_var.name()]
        if _is_parameter(each_var, program_holder.infer_program):
            # create output varbase
            new_var = framework.ParamBase(
                shape=each_var.shape(),
                dtype=each_var.dtype(),
                name=each_var.name(),
                type=each_var.type(),
                persistable=True)
        else:
            new_var = framework._varbase_creator(
                type=each_var.type(),
                name=each_var.name(),
                shape=each_var.shape(),
                dtype=each_var.dtype(),
                persistable=True)
        if params_filename is None:
            framework._dygraph_tracer().trace_op(
                type='load',
                inputs={},
                outputs={'Out': new_var},
                attrs={'file_path': os.path.join(model_path, orig_each_name)})
        new_var.stop_gradient = False
        load_var_dict[each_var.name()] = new_var

    if params_filename is not None:
        load_var_list = []
        for name in sorted(load_var_dict.keys()):
            load_var_list.append(load_var_dict[name])

        framework._dygraph_tracer().trace_op(
            type='load_combine',
            inputs={},
            outputs={'Out': load_var_list},
            attrs={'file_path': os.path.join(model_path, params_filename)})

        for each_var in persistable_vars:
            if not _is_parameter(each_var, program_holder.infer_program):
                continue
            param = load_var_dict[each_var.name()]
            param.stop_gradient = False

    # NOTE: [Recovery stop gradient information based on the program]
    # After loading the model, the stop_gradient information 
    # of the original variable is lost, but if a parameter does not
    # have a corresponding @GRAD variable in the backward program,
    # it can be said that it is also stop_gradient
    all_var_names = _get_all_var_names(program_holder.train_program)
    for var_name in load_var_dict:
        grad_var_name = var_name + core.grad_var_suffix()
        if grad_var_name not in all_var_names:
            load_var_dict[var_name].stop_gradient = True

    return load_var_dict


def _load_persistable_vars(model_path,
                           var_info_path,
                           program_holder,
                           separate_params=False,
                           params_filename=None):
    # 1. load extra var info
    with open(var_info_path, 'rb') as f:
        extra_var_info = pickle.load(f)

    # 2. construct var dict
    load_var_dict = dict()
    load_var_list = []
    inv_suffix_varname_dict = {
        value: key
        for key, value in program_holder._suffix_varname_dict.items()
    }

    # NOTE(chenweihang): we need load persistable vars based the program,
    # because the program may be pruned when `save_inference_model`, some
    # var in `extra_var_info` may have been pruned 
    for name in sorted(inv_suffix_varname_dict):
        if name not in extra_var_info:
            raise RuntimeError(
                "The model to be loaded is not complete."
                "The variable `%s` of program cannot be found in loaded model.",
                name)
        # get suffix var name, see [why need to append suffix to persistable vars]
        new_name = inv_suffix_varname_dict[name]
        # create output varbase
        if extra_var_info[name].get('trainable', None) is not None:
            # use default shape and dtype
            new_var = framework.ParamBase(
                shape=[1],  # only to pass check, this shape is not meaningful
                dtype=core.VarDesc.VarType.FP32,
                name=new_name,
                persistable=True)
        else:
            new_var = framework._varbase_creator(
                name=new_name, persistable=True)

        # load separate vars
        if separate_params is True:
            framework._dygraph_tracer().trace_op(
                type='load',
                inputs={},
                outputs={'Out': new_var},
                attrs={'file_path': os.path.join(model_path, name)})

        new_var.stop_gradient = extra_var_info[name]['stop_gradient']
        load_var_dict[new_name] = new_var
        load_var_list.append(new_var)

    # 3. load all vars
    if separate_params is False:
        if params_filename is not None:
            var_file_path = os.path.join(model_path, params_filename)
        else:
            var_file_path = os.path.join(model_path, VARIABLE_FILENAME)
        if not os.path.exists(var_file_path):
            if len(extra_var_info) != 0:
                raise ValueError("The model to be loaded is incomplete.")
        else:
            framework._dygraph_tracer().trace_op(
                type='load_combine',
                inputs={},
                outputs={'Out': load_var_list},
                attrs={'file_path': var_file_path})

    return load_var_dict


# NOTE(chenweihang): to adapt paddle.load to get state_dict
def _remove_varname_suffix(var_dict, program_holder):
    no_suffix_var_dict = dict()
    for var_name in var_dict:
        no_suffix_name = program_holder._suffix_varname_dict[var_name]
        no_suffix_var_dict[no_suffix_name] = var_dict[var_name]
    return no_suffix_var_dict


def _construct_program_holders(model_path, model_filename=None):
    # make sure the path has been checked
    program_holder_dict = dict()

    if model_filename is not None:
        # [compatible] if assign model_filename, only can load one program as Layer.forward
        model_filename = os.path.basename(model_filename)
        model_file_path = os.path.join(model_path, model_filename)
        program_holder_dict['forward'] = _ProgramHolder(
            _load_program_desc(model_file_path))
    else:
        for _, _, file_names in os.walk(model_path):
            for name in file_names:
                if 'model' in name:
                    model_file_path = os.path.join(model_path, name)
                    method_name = name.strip('_')
                    if method_name == 'model':
                        method_name = 'forward'
                    else:
                        method_name.replace('model', '')
                    program_holder_dict[method_name] = _ProgramHolder(
                        _load_program_desc(model_file_path))

    return program_holder_dict


def _construct_params_and_buffers(model_path,
                                  programs,
                                  separate_params=False,
                                  params_filename=None,
                                  append_suffix=True):
    var_info_path = os.path.join(model_path, EXTRA_VAR_INFO_FILENAME)
    if os.path.exists(var_info_path):
        var_dict = _load_persistable_vars(model_path, var_info_path,
                                          programs['forward'], separate_params,
                                          params_filename)
    else:
        var_dict = _load_persistable_vars_by_program(
            model_path, programs['forward'], params_filename)

    if not append_suffix:
        var_dict = _remove_varname_suffix(var_dict, programs['forward'])

    return var_dict


class TranslatedLayer(layers.Layer):
    """
    TranslatedLayer is a imperative Layer for holding the model loaded by 
    :ref:`api_imperative_jit_load` . It can be used like a general Layer 
    object in eval or train mode.
    
    .. note:
        The TranslatedLayer objects should not be created by constructor, it only can be loaded and constructed by :ref:`api_imperative_jit_load` .

    Examples:
        .. code-block:: python

            import numpy as np
            import paddle
            import paddle.nn as nn
            import paddle.optimizer as opt

            BATCH_SIZE = 16
            BATCH_NUM = 4
            EPOCH_NUM = 4

            IMAGE_SIZE = 784
            CLASS_NUM = 10

            # define a random dataset
            class RandomDataset(paddle.io.Dataset):
                def __init__(self, num_samples):
                    self.num_samples = num_samples

                def __getitem__(self, idx):
                    image = np.random.random([IMAGE_SIZE]).astype('float32')
                    label = np.random.randint(0, CLASS_NUM - 1, (1, )).astype('int64')
                    return image, label

                def __len__(self):
                    return self.num_samples

            class LinearNet(nn.Layer):
                def __init__(self):
                    super(LinearNet, self).__init__()
                    self._linear = nn.Linear(IMAGE_SIZE, CLASS_NUM)

                @paddle.jit.to_static
                def forward(self, x):
                    return self._linear(x)

            def train(layer, loader, loss_fn, opt):
                for epoch_id in range(EPOCH_NUM):
                    for batch_id, (image, label) in enumerate(loader()):
                        out = layer(image)
                        loss = loss_fn(out, label)
                        loss.backward()
                        opt.step()
                        opt.clear_grad()
                        print("Epoch {} batch {}: loss = {}".format(
                            epoch_id, batch_id, np.mean(loss.numpy())))

            # enable dygraph mode
            place = paddle.CPUPlace()
            paddle.disable_static(place) 

            # 1. train & save model.

            # create network
            layer = LinearNet()
            loss_fn = nn.CrossEntropyLoss()
            adam = opt.Adam(learning_rate=0.001, parameters=layer.parameters())

            # create data loader
            dataset = RandomDataset(BATCH_NUM * BATCH_SIZE)
            loader = paddle.io.DataLoader(dataset,
                places=place,
                batch_size=BATCH_SIZE,
                shuffle=True,
                drop_last=True,
                num_workers=2)

            # train
            train(layer, loader, loss_fn, adam)

            # save
            model_path = "linear.example.model"
            paddle.jit.save(layer, model_path)

            # 2. load model as TranslatedLayer

            # load
            translated_layer = paddle.jit.load(model_path)

            # inference
            translated_layer.eval()
            x = paddle.randn([1, IMAGE_SIZE], 'float32')
            pred = translated_layer(x)

            # fine-tune
            translated_layer.train()
            adam = opt.Adam(learning_rate=0.001, parameters=translated_layer.parameters())
            train(translated_layer, loader, loss_fn, adam)

    """

    def __init__(self, programs, persistable_vars):
        super(TranslatedLayer, self).__init__()

        if not isinstance(programs, dict):
            raise TypeError(
                "TranslatedLayer need to use _ProgramHolder's dict for initialization."
            )
        if not isinstance(persistable_vars, dict):
            raise TypeError(
                "TranslatedLayer need to use persistable variable dict for initialization."
            )

        self._program_holder_dict = programs

        # NOTE(chenweihang): [ why not use var name directly? ]
        # When add parameter or buffer to Layer by follow apis,
        # the variable name can't contain `.`, beccause which may cause
        # AttributeError when access the newly added parameter or buffer
        # in the form of `self.**.**``, but the ParamBase or BarBase
        # name contains `.` originally, such as `linear_0.w_0`, so here
        # need to generate new var name for each var
        self._persistable_var_name_dict = dict()
        # the TranslatedLayer object holded var names count started from 0
        with unique_name.guard():
            for name, var in persistable_vars.items():
                if isinstance(var, framework.ParamBase):
                    dy_name = _generate_unique_var_name(PARAMETER_NAME_PREFIX)
                    self._persistable_var_name_dict[name] = dy_name
                    self.add_parameter(dy_name, var)
                elif isinstance(var, core.VarBase):
                    dy_name = _generate_unique_var_name(BUFFER_NAME_PREFIX)
                    self._persistable_var_name_dict[name] = dy_name
                    self.register_buffer(dy_name, var)
                else:
                    raise TypeError(
                        "Adding persistent variable which  to layer is not supported now"
                    )

        self._is_test = True

    @staticmethod
    @framework.dygraph_only
    def _construct(model_path, configs=None):
        # 0. dir and filename check
        model_path = os.path.normpath(model_path)
        if not os.path.isdir(model_path):
            raise ValueError("There is no directory named '%s'" % model_path)
        model_filename = None
        params_filename = None
        separate_params = False
        if configs is not None:
            model_filename = configs.model_filename
            params_filename = configs.params_filename
            separate_params = configs.separate_params

        # 1. load program desc & construct _ProgramHolder
        programs = _construct_program_holders(model_path, model_filename)

        # 2. load layer parameters & buffers
        persistable_vars = _construct_params_and_buffers(
            model_path, programs, separate_params, params_filename)

        # 3. construct TranslatedLayer object
        translated_layer = TranslatedLayer(programs, persistable_vars)

        # 4. create TranslatedLayer's execution method
        for method_name, program_holder in programs.items():
            setattr(TranslatedLayer, method_name,
                    TranslatedLayer._execution_method_creator(method_name,
                                                              program_holder))

        # 5. set TranslatedLayer's default mode to eval
        translated_layer.eval()

        return translated_layer

    @staticmethod
    def _execution_method_creator(method_name, program_holder):
        def __impl__(self, *input):
            # 1. prepare inputs, outputs, attrs
            input_vars = []
            for i, value in enumerate(input):
                if not isinstance(value, (np.ndarray, core.VarBase)):
                    raise TypeError(
                        "The type of input in TranslatedLayer must be numpy array or Variable(VarBase), but received %s."
                        % type(value))
                # NOTE: In order to unify the API, firstly convert the input to VarBase
                if isinstance(value, np.ndarray):
                    var = core.VarBase(
                        value=value,
                        name=program_holder.input_names[i],
                        persistable=False,
                        place=framework._current_expected_place(),
                        zero_copy=True)
                else:
                    var = value
                    # NOTE: we changed var name here, 
                    # but it may be an important name set by user
                    var.name = program_holder.input_names[i]
                input_vars.append(var)

            persistable_vars = []
            for var_name in program_holder.persistable_names:
                dy_var_name = self._persistable_var_name_dict[var_name]
                if dy_var_name in self._parameters:
                    persistable_vars.append(self._parameters[dy_var_name])
                elif dy_var_name in self._buffers:
                    persistable_vars.append(self._buffers[dy_var_name])
                else:
                    raise ValueError(
                        "The persistable variable %s is not exists in current TranslatedLayer."
                        % var_name)

            output_vars = []
            for var_desc in program_holder.output_decs:
                var = core.VarBase(var_desc.dtype(),
                                   var_desc.shape(),
                                   var_desc.name(), var_desc.type(), False)
                output_vars.append(var)

            # hold forward variables
            tmp_scope_vec = core.VarBase(core.VarDesc.VarType.FP32, [],
                                         "program_out_scope",
                                         core.VarDesc.VarType.STEP_SCOPES, True)
            tmp_scope_vec.value().set_scope(program_holder.scope)

            # 2. run program by op
            trace_program = program_holder.infer_program if self._is_test else program_holder.train_program
            end_op_index = program_holder.infer_program.block(0).op_size()
            framework._dygraph_tracer().trace_op(
                type='run_program',
                inputs={'X': input_vars,
                        'Params': persistable_vars},
                outputs={'Out': output_vars,
                         'OutScope': tmp_scope_vec},
                attrs={
                    'global_block': trace_program.block(0),
                    'start_op_index': 0,
                    'end_op_index': end_op_index,
                    'is_test': self._is_test
                })

            # NOTE: [ why need set param's gradient type here ]
            # if user set sparse gradient mode, the param's gradient
            # will be SelectedRows, not LoDTensor. But tracer will just
            # set param grad VarBase by forward VarBase(LoDTensor)
            # If we don't change grad_var type here, RunProgramOp need
            # transform SelectedRows to LoDTensor forcibly, it may not
            # be user wanted result.
            for persistable_var in persistable_vars:
                grad_var_name = var.name + core.grad_var_suffix()
                grad_var = trace_program.block(0).find_var(
                    cpt.to_bytes(grad_var_name))
                # NOTE: cannot find var desc maybe not problem, 
                # such as in batch_norm
                if grad_var is None:
                    continue
                persistable_var._set_grad_type(grad_var.type())

            # 3. prepare output, keep same form with inputs
            outs = output_vars
            if len(output_vars) == 1:
                outs = output_vars[0]
            return outs

        __impl__.__name__ = method_name
        return __impl__

    def train(self):
        self._is_test = False

    def eval(self):
        self._is_test = True

    def program(self, method_name='forward'):
        """
        Gets translated program of specified method.

        Args:
            - method_name (string): mehtod name corresponding to the program
                to be obtained. Default: 'forward'.
        
        Returns:
            Program

        Examples:
            .. code-block:: python
            
                import numpy as np
                import paddle
                import paddle.nn as nn
                import paddle.optimizer as opt

                BATCH_SIZE = 16
                BATCH_NUM = 4
                EPOCH_NUM = 4

                IMAGE_SIZE = 784
                CLASS_NUM = 10

                # define a random dataset
                class RandomDataset(paddle.io.Dataset):
                    def __init__(self, num_samples):
                        self.num_samples = num_samples

                    def __getitem__(self, idx):
                        image = np.random.random([IMAGE_SIZE]).astype('float32')
                        label = np.random.randint(0, CLASS_NUM - 1, (1, )).astype('int64')
                        return image, label

                    def __len__(self):
                        return self.num_samples

                class LinearNet(nn.Layer):
                    def __init__(self):
                        super(LinearNet, self).__init__()
                        self._linear = nn.Linear(IMAGE_SIZE, CLASS_NUM)

                    @paddle.jit.to_static
                    def forward(self, x):
                        return self._linear(x)

                def train(layer, loader, loss_fn, opt):
                    for epoch_id in range(EPOCH_NUM):
                        for batch_id, (image, label) in enumerate(loader()):
                            out = layer(image)
                            loss = loss_fn(out, label)
                            loss.backward()
                            opt.step()
                            opt.clear_grad()
                            print("Epoch {} batch {}: loss = {}".format(
                                epoch_id, batch_id, np.mean(loss.numpy())))

                # enable dygraph mode
                place = paddle.CPUPlace()
                paddle.disable_static(place) 

                # create network
                layer = LinearNet()
                loss_fn = nn.CrossEntropyLoss()
                adam = opt.Adam(learning_rate=0.001, parameters=layer.parameters())

                # create data loader
                dataset = RandomDataset(BATCH_NUM * BATCH_SIZE)
                loader = paddle.io.DataLoader(dataset,
                    places=place,
                    batch_size=BATCH_SIZE,
                    shuffle=True,
                    drop_last=True,
                    num_workers=2)

                # train
                train(layer, loader, loss_fn, adam)

                # save
                model_path = "linear.example.model"
                paddle.jit.save(layer, model_path)

                # load
                translated_layer = paddle.jit.load(model_path)

                # get program
                program = translated_layer.program()
        """
        # 1. get program holder
        program_holder = self._program_holder_dict.get(method_name, None)
        if program_holder is None:
            raise ValueError(
                "The method `%s` is not exists in loaded TranslatedLayer." %
                method_name)

        # 2. get inference program desc
        program_desc = program_holder.infer_program

        # 3. construct program
        program = _build_program_by_desc(program_desc)
        return program