未验证 提交 1db091b3 编写于 作者: F fatedier 提交者: GitHub

tcp multiplexing over http connect tunnel

上级 0b9124d4
......@@ -752,7 +752,7 @@ proxy_protocol_version = v2
You can enable Proxy Protocol support in nginx to expose user's real IP in HTTP header `X-Real-IP`, and then read `X-Real-IP` header in your web service for the real IP.
### Require HTTP Basic auth (password) for web services
### Require HTTP Basic Auth (Password) for Web Services
Anyone who can guess your tunnel URL can access your local web server unless you protect it with a password.
......@@ -772,7 +772,7 @@ http_pwd = abc
Visit `http://test.example.com` in the browser and now you are prompted to enter the username and password.
### Custom subdomain names
### Custom Subdomain Names
It is convenient to use `subdomain` configure for http and https types when many people share one frps server.
......@@ -795,7 +795,7 @@ Now you can visit your web service on `test.frps.com`.
Note that if `subdomain_host` is not empty, `custom_domains` should not be the subdomain of `subdomain_host`.
### URL routing
### URL Routing
frp supports forwarding HTTP requests to different backend web services by url routing.
......@@ -818,6 +818,49 @@ locations = /news,/about
HTTP requests with URL prefix `/news` or `/about` will be forwarded to **web02** and other requests to **web01**.
### TCP Multiplexing
frp supports receiving TCP sockets directed to different proxies on a single port on frps, similar to `vhost_http_port` and `vhost_https_port`.
The only supported TCP multiplexing method available at the moment is `httpconnect` - HTTP CONNECT tunnel.
When setting `tcpmux_httpconnect_port` to anything other than 0 in frps under `[common]`, frps will listen on this port for HTTP CONNECT requests.
The host of the HTTP CONNECT request will be used to match the proxy in frps. Proxy hosts can be configured in frpc by configuring `custom_domain` and / or `subdomain` under `type = tcpmux` proxies, when `multiplexer = httpconnect`.
For example:
```ini
# frps.ini
[common]
bind_port = 7000
tcpmux_httpconnect_port = 1337
```
```ini
# frpc.ini
[common]
server_addr = x.x.x.x
server_port = 7000
[proxy1]
type = tcpmux
multiplexer = httpconnect
custom_domains = test1
[proxy2]
type = tcpmux
multiplexer = httpconnect
custom_domains = test2
```
In the above configuration - frps can be contacted on port 1337 with a HTTP CONNECT header such as:
```
CONNECT test1 HTTP/1.1\r\n\r\n
```
and the connection will be routed to `proxy1`.
### Connecting to frps via HTTP PROXY
frpc can connect to frps using HTTP proxy if you set OS environment variable `HTTP_PROXY`, or if `http_proxy` is set in frpc.ini file.
......
......@@ -72,6 +72,11 @@ func NewProxy(ctx context.Context, pxyConf config.ProxyConf, clientCfg config.Cl
BaseProxy: &baseProxy,
cfg: cfg,
}
case *config.TcpMuxProxyConf:
pxy = &TcpMuxProxy{
BaseProxy: &baseProxy,
cfg: cfg,
}
case *config.UdpProxyConf:
pxy = &UdpProxy{
BaseProxy: &baseProxy,
......@@ -141,6 +146,35 @@ func (pxy *TcpProxy) InWorkConn(conn net.Conn, m *msg.StartWorkConn) {
conn, []byte(pxy.clientCfg.Token), m)
}
// TCP Multiplexer
type TcpMuxProxy struct {
*BaseProxy
cfg *config.TcpMuxProxyConf
proxyPlugin plugin.Plugin
}
func (pxy *TcpMuxProxy) Run() (err error) {
if pxy.cfg.Plugin != "" {
pxy.proxyPlugin, err = plugin.Create(pxy.cfg.Plugin, pxy.cfg.PluginParams)
if err != nil {
return
}
}
return
}
func (pxy *TcpMuxProxy) Close() {
if pxy.proxyPlugin != nil {
pxy.proxyPlugin.Close()
}
}
func (pxy *TcpMuxProxy) InWorkConn(conn net.Conn, m *msg.StartWorkConn) {
HandleTcpWorkConnection(pxy.ctx, &pxy.cfg.LocalSvrConf, pxy.proxyPlugin, &pxy.cfg.BaseProxyConf, pxy.limiter,
conn, []byte(pxy.clientCfg.Token), m)
}
// HTTP
type HttpProxy struct {
*BaseProxy
......
......@@ -66,6 +66,7 @@ var (
hostHeaderRewrite string
role string
sk string
multiplexer string
serverName string
bindAddr string
bindPort int
......
// Copyright 2020 guylewin, guy@lewin.co.il
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package sub
import (
"fmt"
"os"
"strings"
"github.com/spf13/cobra"
"github.com/fatedier/frp/models/config"
"github.com/fatedier/frp/models/consts"
)
func init() {
tcpMuxCmd.PersistentFlags().StringVarP(&serverAddr, "server_addr", "s", "127.0.0.1:7000", "frp server's address")
tcpMuxCmd.PersistentFlags().StringVarP(&user, "user", "u", "", "user")
tcpMuxCmd.PersistentFlags().StringVarP(&protocol, "protocol", "p", "tcp", "tcp or kcp or websocket")
tcpMuxCmd.PersistentFlags().StringVarP(&token, "token", "t", "", "auth token")
tcpMuxCmd.PersistentFlags().StringVarP(&logLevel, "log_level", "", "info", "log level")
tcpMuxCmd.PersistentFlags().StringVarP(&logFile, "log_file", "", "console", "console or file path")
tcpMuxCmd.PersistentFlags().IntVarP(&logMaxDays, "log_max_days", "", 3, "log file reversed days")
tcpMuxCmd.PersistentFlags().BoolVarP(&disableLogColor, "disable_log_color", "", false, "disable log color in console")
tcpMuxCmd.PersistentFlags().StringVarP(&proxyName, "proxy_name", "n", "", "proxy name")
tcpMuxCmd.PersistentFlags().StringVarP(&localIp, "local_ip", "i", "127.0.0.1", "local ip")
tcpMuxCmd.PersistentFlags().IntVarP(&localPort, "local_port", "l", 0, "local port")
tcpMuxCmd.PersistentFlags().StringVarP(&customDomains, "custom_domain", "d", "", "custom domain")
tcpMuxCmd.PersistentFlags().StringVarP(&subDomain, "sd", "", "", "sub domain")
tcpMuxCmd.PersistentFlags().StringVarP(&multiplexer, "mux", "", "", "multiplexer")
tcpMuxCmd.PersistentFlags().BoolVarP(&useEncryption, "ue", "", false, "use encryption")
tcpMuxCmd.PersistentFlags().BoolVarP(&useCompression, "uc", "", false, "use compression")
rootCmd.AddCommand(tcpMuxCmd)
}
var tcpMuxCmd = &cobra.Command{
Use: "tcpmux",
Short: "Run frpc with a single tcpmux proxy",
RunE: func(cmd *cobra.Command, args []string) error {
clientCfg, err := parseClientCommonCfg(CfgFileTypeCmd, "")
if err != nil {
fmt.Println(err)
os.Exit(1)
}
cfg := &config.TcpMuxProxyConf{}
var prefix string
if user != "" {
prefix = user + "."
}
cfg.ProxyName = prefix + proxyName
cfg.ProxyType = consts.TcpMuxProxy
cfg.LocalIp = localIp
cfg.LocalPort = localPort
cfg.CustomDomains = strings.Split(customDomains, ",")
cfg.SubDomain = subDomain
cfg.Multiplexer = multiplexer
cfg.UseEncryption = useEncryption
cfg.UseCompression = useCompression
err = cfg.CheckForCli()
if err != nil {
fmt.Println(err)
os.Exit(1)
}
proxyConfs := map[string]config.ProxyConf{
cfg.ProxyName: cfg,
}
err = startService(clientCfg, proxyConfs, nil, "")
if err != nil {
fmt.Println(err)
os.Exit(1)
}
return nil
},
}
......@@ -34,6 +34,7 @@ var (
func init() {
proxyConfTypeMap = make(map[string]reflect.Type)
proxyConfTypeMap[consts.TcpProxy] = reflect.TypeOf(TcpProxyConf{})
proxyConfTypeMap[consts.TcpMuxProxy] = reflect.TypeOf(TcpMuxProxyConf{})
proxyConfTypeMap[consts.UdpProxy] = reflect.TypeOf(UdpProxyConf{})
proxyConfTypeMap[consts.HttpProxy] = reflect.TypeOf(HttpProxyConf{})
proxyConfTypeMap[consts.HttpsProxy] = reflect.TypeOf(HttpsProxyConf{})
......@@ -574,6 +575,84 @@ func (cfg *TcpProxyConf) CheckForCli() (err error) {
func (cfg *TcpProxyConf) CheckForSvr(serverCfg ServerCommonConf) error { return nil }
// TCP Multiplexer
type TcpMuxProxyConf struct {
BaseProxyConf
DomainConf
Multiplexer string `json:"multiplexer"`
}
func (cfg *TcpMuxProxyConf) Compare(cmp ProxyConf) bool {
cmpConf, ok := cmp.(*TcpMuxProxyConf)
if !ok {
return false
}
if !cfg.BaseProxyConf.compare(&cmpConf.BaseProxyConf) ||
!cfg.DomainConf.compare(&cmpConf.DomainConf) ||
cfg.Multiplexer != cmpConf.Multiplexer {
return false
}
return true
}
func (cfg *TcpMuxProxyConf) UnmarshalFromMsg(pMsg *msg.NewProxy) {
cfg.BaseProxyConf.UnmarshalFromMsg(pMsg)
cfg.DomainConf.UnmarshalFromMsg(pMsg)
cfg.Multiplexer = pMsg.Multiplexer
}
func (cfg *TcpMuxProxyConf) UnmarshalFromIni(prefix string, name string, section ini.Section) (err error) {
if err = cfg.BaseProxyConf.UnmarshalFromIni(prefix, name, section); err != nil {
return
}
if err = cfg.DomainConf.UnmarshalFromIni(prefix, name, section); err != nil {
return
}
cfg.Multiplexer = section["multiplexer"]
if cfg.Multiplexer != consts.HttpConnectTcpMultiplexer {
return fmt.Errorf("parse conf error: proxy [%s] incorrect multiplexer [%s]", name, cfg.Multiplexer)
}
return
}
func (cfg *TcpMuxProxyConf) MarshalToMsg(pMsg *msg.NewProxy) {
cfg.BaseProxyConf.MarshalToMsg(pMsg)
cfg.DomainConf.MarshalToMsg(pMsg)
pMsg.Multiplexer = cfg.Multiplexer
}
func (cfg *TcpMuxProxyConf) CheckForCli() (err error) {
if err = cfg.BaseProxyConf.checkForCli(); err != nil {
return err
}
if err = cfg.DomainConf.checkForCli(); err != nil {
return err
}
if cfg.Multiplexer != consts.HttpConnectTcpMultiplexer {
return fmt.Errorf("parse conf error: incorrect multiplexer [%s]", cfg.Multiplexer)
}
return
}
func (cfg *TcpMuxProxyConf) CheckForSvr(serverCfg ServerCommonConf) (err error) {
if cfg.Multiplexer != consts.HttpConnectTcpMultiplexer {
return fmt.Errorf("proxy [%s] incorrect multiplexer [%s]", cfg.ProxyName, cfg.Multiplexer)
}
if cfg.Multiplexer == consts.HttpConnectTcpMultiplexer && serverCfg.TcpMuxHttpConnectPort == 0 {
return fmt.Errorf("proxy [%s] type [tcpmux] with multiplexer [httpconnect] requires tcpmux_httpconnect_port configuration", cfg.ProxyName)
}
if err = cfg.DomainConf.checkForSvr(serverCfg); err != nil {
err = fmt.Errorf("proxy [%s] domain conf check error: %v", cfg.ProxyName, err)
return
}
return
}
// UDP
type UdpProxyConf struct {
BaseProxyConf
......
......@@ -59,6 +59,12 @@ type ServerCommonConf struct {
// requests. By default, this value is 0.
VhostHttpsPort int `json:"vhost_https_port"`
// TcpMuxHttpConnectPort specifies the port that the server listens for TCP
// HTTP CONNECT requests. If the value is 0, the server will not multiplex TCP
// requests on one single port. If it's not - it will listen on this value for
// HTTP CONNECT requests. By default, this value is 0.
TcpMuxHttpConnectPort int `json:"tcpmux_httpconnect_port"`
// VhostHttpTimeout specifies the response header timeout for the Vhost
// HTTP server, in seconds. By default, this value is 60.
VhostHttpTimeout int64 `json:"vhost_http_timeout"`
......@@ -155,6 +161,7 @@ func GetDefaultServerConf() ServerCommonConf {
ProxyBindAddr: "0.0.0.0",
VhostHttpPort: 0,
VhostHttpsPort: 0,
TcpMuxHttpConnectPort: 0,
VhostHttpTimeout: 60,
DashboardAddr: "0.0.0.0",
DashboardPort: 0,
......@@ -259,6 +266,17 @@ func UnmarshalServerConfFromIni(content string) (cfg ServerCommonConf, err error
cfg.VhostHttpsPort = 0
}
if tmpStr, ok = conf.Get("common", "tcpmux_httpconnect_port"); ok {
if v, err = strconv.ParseInt(tmpStr, 10, 64); err != nil {
err = fmt.Errorf("Parse conf error: invalid tcpmux_httpconnect_port")
return
} else {
cfg.TcpMuxHttpConnectPort = int(v)
}
} else {
cfg.TcpMuxHttpConnectPort = 0
}
if tmpStr, ok = conf.Get("common", "vhost_http_timeout"); ok {
v, errRet := strconv.ParseInt(tmpStr, 10, 64)
if errRet != nil || v < 0 {
......
......@@ -23,14 +23,18 @@ var (
Offline string = "offline"
// proxy type
TcpProxy string = "tcp"
UdpProxy string = "udp"
HttpProxy string = "http"
HttpsProxy string = "https"
StcpProxy string = "stcp"
XtcpProxy string = "xtcp"
TcpProxy string = "tcp"
UdpProxy string = "udp"
TcpMuxProxy string = "tcpmux"
HttpProxy string = "http"
HttpsProxy string = "https"
StcpProxy string = "stcp"
XtcpProxy string = "xtcp"
// authentication method
TokenAuthMethod string = "token"
OidcAuthMethod string = "oidc"
// tcp multiplexer
HttpConnectTcpMultiplexer string = "httpconnect"
)
......@@ -107,6 +107,9 @@ type NewProxy struct {
// stcp
Sk string `json:"sk"`
// tcpmux
Multiplexer string `json:"multiplexer"`
}
type NewProxyResp struct {
......
......@@ -18,6 +18,7 @@ import (
"github.com/fatedier/frp/models/nathole"
"github.com/fatedier/frp/server/group"
"github.com/fatedier/frp/server/ports"
"github.com/fatedier/frp/utils/tcpmux"
"github.com/fatedier/frp/utils/vhost"
)
......@@ -46,4 +47,7 @@ type ResourceController struct {
// Controller for nat hole connections
NatHoleController *nathole.NatHoleController
// TcpMux HTTP CONNECT multiplexer
TcpMuxHttpConnectMuxer *tcpmux.HttpConnectTcpMuxer
}
......@@ -95,6 +95,12 @@ type TcpOutConf struct {
RemotePort int `json:"remote_port"`
}
type TcpMuxOutConf struct {
BaseOutConf
config.DomainConf
Multiplexer string `json:"multiplexer"`
}
type UdpOutConf struct {
BaseOutConf
RemotePort int `json:"remote_port"`
......@@ -124,6 +130,8 @@ func getConfByType(proxyType string) interface{} {
switch proxyType {
case consts.TcpProxy:
return &TcpOutConf{}
case consts.TcpMuxProxy:
return &TcpMuxOutConf{}
case consts.UdpProxy:
return &UdpOutConf{}
case consts.HttpProxy:
......
......@@ -177,6 +177,11 @@ func NewProxy(ctx context.Context, runId string, rc *controller.ResourceControll
BaseProxy: &basePxy,
cfg: cfg,
}
case *config.TcpMuxProxyConf:
pxy = &TcpMuxProxy{
BaseProxy: &basePxy,
cfg: cfg,
}
case *config.HttpProxyConf:
pxy = &HttpProxy{
BaseProxy: &basePxy,
......
// Copyright 2020 guylewin, guy@lewin.co.il
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package proxy
import (
"fmt"
"strings"
"github.com/fatedier/frp/models/config"
"github.com/fatedier/frp/models/consts"
"github.com/fatedier/frp/utils/util"
"github.com/fatedier/frp/utils/vhost"
)
type TcpMuxProxy struct {
*BaseProxy
cfg *config.TcpMuxProxyConf
realPort int
}
func (pxy *TcpMuxProxy) httpConnectListen(domain string, addrs []string) ([]string, error) {
routeConfig := &vhost.VhostRouteConfig{
Domain: domain,
}
l, err := pxy.rc.TcpMuxHttpConnectMuxer.Listen(pxy.ctx, routeConfig)
if err != nil {
return nil, err
}
pxy.xl.Info("tcpmux httpconnect multiplexer listens for host [%s]", routeConfig.Domain)
pxy.listeners = append(pxy.listeners, l)
return append(addrs, util.CanonicalAddr(routeConfig.Domain, pxy.serverCfg.TcpMuxHttpConnectPort)), nil
}
func (pxy *TcpMuxProxy) httpConnectRun() (remoteAddr string, err error) {
addrs := make([]string, 0)
for _, domain := range pxy.cfg.CustomDomains {
if domain == "" {
continue
}
addrs, err = pxy.httpConnectListen(domain, addrs)
if err != nil {
return "", err
}
}
if pxy.cfg.SubDomain != "" {
addrs, err = pxy.httpConnectListen(pxy.cfg.SubDomain+"."+pxy.serverCfg.SubDomainHost, addrs)
if err != nil {
return "", err
}
}
pxy.startListenHandler(pxy, HandleUserTcpConnection)
remoteAddr = strings.Join(addrs, ",")
return remoteAddr, err
}
func (pxy *TcpMuxProxy) Run() (remoteAddr string, err error) {
switch pxy.cfg.Multiplexer {
case consts.HttpConnectTcpMultiplexer:
remoteAddr, err = pxy.httpConnectRun()
default:
err = fmt.Errorf("unknown multiplexer [%s]", pxy.cfg.Multiplexer)
}
if err != nil {
pxy.Close()
}
return remoteAddr, err
}
func (pxy *TcpMuxProxy) GetConf() config.ProxyConf {
return pxy.cfg
}
func (pxy *TcpMuxProxy) Close() {
pxy.BaseProxy.Close()
if pxy.cfg.Group == "" {
pxy.rc.TcpPortManager.Release(pxy.realPort)
}
}
......@@ -42,6 +42,7 @@ import (
"github.com/fatedier/frp/server/stats"
"github.com/fatedier/frp/utils/log"
frpNet "github.com/fatedier/frp/utils/net"
"github.com/fatedier/frp/utils/tcpmux"
"github.com/fatedier/frp/utils/util"
"github.com/fatedier/frp/utils/version"
"github.com/fatedier/frp/utils/vhost"
......@@ -52,7 +53,8 @@ import (
)
const (
connReadTimeout time.Duration = 10 * time.Second
connReadTimeout time.Duration = 10 * time.Second
vhostReadWriteTimeout time.Duration = 30 * time.Second
)
// Server service
......@@ -212,7 +214,7 @@ func NewService(cfg config.ServerCommonConf) (svr *Service, err error) {
}
}
svr.rc.VhostHttpsMuxer, err = vhost.NewHttpsMuxer(l, 30*time.Second)
svr.rc.VhostHttpsMuxer, err = vhost.NewHttpsMuxer(l, vhostReadWriteTimeout)
if err != nil {
err = fmt.Errorf("Create vhost httpsMuxer error, %v", err)
return
......@@ -220,6 +222,23 @@ func NewService(cfg config.ServerCommonConf) (svr *Service, err error) {
log.Info("https service listen on %s:%d", cfg.ProxyBindAddr, cfg.VhostHttpsPort)
}
// Create tcpmux httpconnect multiplexer.
if cfg.TcpMuxHttpConnectPort > 0 {
var l net.Listener
l, err = net.Listen("tcp", fmt.Sprintf("%s:%d", cfg.ProxyBindAddr, cfg.TcpMuxHttpConnectPort))
if err != nil {
err = fmt.Errorf("Create server listener error, %v", err)
return
}
svr.rc.TcpMuxHttpConnectMuxer, err = tcpmux.NewHttpConnectTcpMuxer(l, vhostReadWriteTimeout)
if err != nil {
err = fmt.Errorf("Create vhost tcpMuxer error, %v", err)
return
}
log.Info("tcpmux httpconnect multiplexer listen on %s:%d", cfg.ProxyBindAddr, cfg.TcpMuxHttpConnectPort)
}
// frp tls listener
svr.tlsListener = svr.muxer.Listen(1, 1, func(data []byte) bool {
return int(data[0]) == frpNet.FRP_TLS_HEAD_BYTE
......
......@@ -126,6 +126,13 @@ custom_domains = test6.frp.com
host_header_rewrite = test6.frp.com
header_X-From-Where = frp
[tcpmuxhttpconnect]
type = tcpmux
multiplexer = httpconnect
local_ip = 127.0.0.1
local_port = 10701
custom_domains = tunnel1
[wildcard_http]
type = http
local_ip = 127.0.0.1
......
......@@ -2,6 +2,7 @@
bind_addr = 0.0.0.0
bind_port = 10700
vhost_http_port = 10804
tcpmux_httpconnect_port = 10806
log_level = trace
token = 123456
allow_ports = 10000-20000,20002,30000-50000
......
......@@ -212,6 +212,17 @@ func TestHttp(t *testing.T) {
}
}
func TestTcpMux(t *testing.T) {
assert := assert.New(t)
conn, err := gnet.DialTcpByProxy(fmt.Sprintf("http://%s:%d", "127.0.0.1", consts.TEST_TCP_MUX_FRP_PORT), "tunnel1")
if assert.NoError(err) {
res, err := util.SendTcpMsgByConn(conn, consts.TEST_TCP_ECHO_STR)
assert.NoError(err)
assert.Equal(consts.TEST_TCP_ECHO_STR, res)
}
}
func TestWebSocket(t *testing.T) {
assert := assert.New(t)
......
......@@ -40,6 +40,8 @@ var (
TEST_HTTP_FOO_STR string = "http foo string: " + TEST_STR
TEST_HTTP_BAR_STR string = "http bar string: " + TEST_STR
TEST_TCP_MUX_FRP_PORT int = 10806
TEST_STCP_FRP_PORT int = 10805
TEST_STCP_EC_FRP_PORT int = 10905
TEST_STCP_ECHO_STR string = "stcp type:" + TEST_STR
......
// Copyright 2020 guylewin, guy@lewin.co.il
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package tcpmux
import (
"bufio"
"fmt"
"io"
"net"
"net/http"
"time"
"github.com/fatedier/frp/utils/util"
"github.com/fatedier/frp/utils/vhost"
)
type HttpConnectTcpMuxer struct {
*vhost.VhostMuxer
}
func NewHttpConnectTcpMuxer(listener net.Listener, timeout time.Duration) (*HttpConnectTcpMuxer, error) {
mux, err := vhost.NewVhostMuxer(listener, getHostFromHttpConnect, nil, sendHttpOk, nil, timeout)
return &HttpConnectTcpMuxer{mux}, err
}
func readHttpConnectRequest(rd io.Reader) (host string, err error) {
bufioReader := bufio.NewReader(rd)
req, err := http.ReadRequest(bufioReader)
if err != nil {
return
}
if req.Method != "CONNECT" {
err = fmt.Errorf("connections to tcp vhost must be of method CONNECT")
return
}
host = util.GetHostFromAddr(req.Host)
return
}
func sendHttpOk(c net.Conn) error {
return util.OkResponse().Write(c)
}
func getHostFromHttpConnect(c net.Conn) (_ net.Conn, _ map[string]string, err error) {
reqInfoMap := make(map[string]string, 0)
host, err := readHttpConnectRequest(c)
if err != nil {
return nil, reqInfoMap, err
}
reqInfoMap["Host"] = host
reqInfoMap["Scheme"] = "tcp"
return c, reqInfoMap, nil
}
// Copyright 2020 guylewin, guy@lewin.co.il
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package util
import (
"net/http"
"strings"
)
func OkResponse() *http.Response {
header := make(http.Header)
res := &http.Response{
Status: "OK",
StatusCode: 200,
Proto: "HTTP/1.1",
ProtoMajor: 1,
ProtoMinor: 1,
Header: header,
}
return res
}
func GetHostFromAddr(addr string) (host string) {
strs := strings.Split(addr, ":")
if len(strs) > 1 {
host = strs[0]
} else {
host = addr
}
return
}
......@@ -26,6 +26,7 @@ import (
"time"
frpLog "github.com/fatedier/frp/utils/log"
"github.com/fatedier/frp/utils/util"
"github.com/fatedier/golib/pool"
)
......@@ -34,16 +35,6 @@ var (
ErrNoDomain = errors.New("no such domain")
)
func getHostFromAddr(addr string) (host string) {
strs := strings.Split(addr, ":")
if len(strs) > 1 {
host = strs[0]
} else {
host = addr
}
return
}
type HttpReverseProxyOptions struct {
ResponseHeaderTimeoutS int64
}
......@@ -67,7 +58,7 @@ func NewHttpReverseProxy(option HttpReverseProxyOptions, vhostRouter *VhostRoute
Director: func(req *http.Request) {
req.URL.Scheme = "http"
url := req.Context().Value("url").(string)
oldHost := getHostFromAddr(req.Context().Value("host").(string))
oldHost := util.GetHostFromAddr(req.Context().Value("host").(string))
host := rp.GetRealHost(oldHost, url)
if host != "" {
req.Host = host
......@@ -84,7 +75,7 @@ func NewHttpReverseProxy(option HttpReverseProxyOptions, vhostRouter *VhostRoute
DisableKeepAlives: true,
DialContext: func(ctx context.Context, network, addr string) (net.Conn, error) {
url := ctx.Value("url").(string)
host := getHostFromAddr(ctx.Value("host").(string))
host := util.GetHostFromAddr(ctx.Value("host").(string))
remote := ctx.Value("remote").(string)
return rp.CreateConnection(host, url, remote)
},
......@@ -187,7 +178,7 @@ func (rp *HttpReverseProxy) getVhost(domain string, location string) (vr *VhostR
}
func (rp *HttpReverseProxy) ServeHTTP(rw http.ResponseWriter, req *http.Request) {
domain := getHostFromAddr(req.Host)
domain := util.GetHostFromAddr(req.Host)
location := req.URL.Path
user, passwd, _ := req.BasicAuth()
if !rp.CheckAuth(domain, location, user, passwd) {
......
......@@ -48,7 +48,7 @@ type HttpsMuxer struct {
}
func NewHttpsMuxer(listener net.Listener, timeout time.Duration) (*HttpsMuxer, error) {
mux, err := NewVhostMuxer(listener, GetHttpsHostname, nil, nil, timeout)
mux, err := NewVhostMuxer(listener, GetHttpsHostname, nil, nil, nil, timeout)
return &HttpsMuxer{mux}, err
}
......
......@@ -29,22 +29,25 @@ import (
type muxFunc func(net.Conn) (net.Conn, map[string]string, error)
type httpAuthFunc func(net.Conn, string, string, string) (bool, error)
type hostRewriteFunc func(net.Conn, string) (net.Conn, error)
type successFunc func(net.Conn) error
type VhostMuxer struct {
listener net.Listener
timeout time.Duration
vhostFunc muxFunc
authFunc httpAuthFunc
successFunc successFunc
rewriteFunc hostRewriteFunc
registryRouter *VhostRouters
}
func NewVhostMuxer(listener net.Listener, vhostFunc muxFunc, authFunc httpAuthFunc, rewriteFunc hostRewriteFunc, timeout time.Duration) (mux *VhostMuxer, err error) {
func NewVhostMuxer(listener net.Listener, vhostFunc muxFunc, authFunc httpAuthFunc, successFunc successFunc, rewriteFunc hostRewriteFunc, timeout time.Duration) (mux *VhostMuxer, err error) {
mux = &VhostMuxer{
listener: listener,
timeout: timeout,
vhostFunc: vhostFunc,
authFunc: authFunc,
successFunc: successFunc,
rewriteFunc: rewriteFunc,
registryRouter: NewVhostRouters(),
}
......@@ -149,7 +152,15 @@ func (v *VhostMuxer) handle(c net.Conn) {
c.Close()
return
}
xl := xlog.FromContextSafe(l.ctx)
if v.successFunc != nil {
if err := v.successFunc(c); err != nil {
xl.Info("success func failure on vhost connection: %v", err)
c.Close()
return
}
}
// if authFunc is exist and userName/password is set
// then verify user access
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册