Skip to content

R
rt-thread

2301_77017786 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 07c0e130 编写于 作者: B Bernard Xiong
浏览文件
操作

Merge pull request #632 from armink/master 

Improve serial DMA rx mode. #628
上级 4e95fdff 7d17f50a
隐藏空白更改
内联 并排
Showing with 427 addition and 146 deletion
bsp/stm32f10x/drivers/usart.c
浏览文件 @ 07c0e130
......@@ -13,6 +13,7 @@
* 2010-03-29 Bernard remove interrupt Tx and DMA Rx mode
* 2013-05-13 aozima update for kehong-lingtai.
* 2015-01-31 armink make sure the serial transmit complete in putc()
* 2016-05-13 armink add DMA Rx mode
*/
#include "stm32f10x.h"
......@@ -44,10 +45,22 @@
/* STM32 uart driver */
struct stm32_uart
{
USART_TypeDef* uart_device;
USART_TypeDef *uart_device;
IRQn_Type irq;
struct stm32_uart_dma {
/* dma channel */
DMA_Channel_TypeDef *rx_ch;
/* dma global flag */
uint32_t rx_gl_flag;
/* dma irq channel */
uint8_t rx_irq_ch;
/* last receive index */
rt_size_t last_recv_len;
} dma;
};
static void DMA_Configuration(struct rt_serial_device *serial);
static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
struct stm32_uart* uart;
......@@ -93,6 +106,7 @@ static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_c
static rt_err_t stm32_control(struct rt_serial_device *serial, int cmd, void *arg)
{
struct stm32_uart* uart;
rt_uint32_t ctrl_arg = (rt_uint32_t)(arg);
RT_ASSERT(serial != RT_NULL);
uart = (struct stm32_uart *)serial->parent.user_data;
......@@ -113,8 +127,13 @@ static rt_err_t stm32_control(struct rt_serial_device *serial, int cmd, void *ar
/* enable interrupt */
USART_ITConfig(uart->uart_device, USART_IT_RXNE, ENABLE);
break;
/* USART config */
case RT_DEVICE_CTRL_CONFIG :
if (ctrl_arg == RT_DEVICE_FLAG_DMA_RX) {
DMA_Configuration(serial);
}
break;
}
return RT_EOK;
}
......@@ -148,6 +167,91 @@ static int stm32_getc(struct rt_serial_device *serial)
return ch;
}
/**
* Serial port receive idle process. This need add to uart idle ISR.
*
* @param serial serial device
*/
static void dma_uart_rx_idle_isr(struct rt_serial_device *serial) {
struct stm32_uart *uart = (struct stm32_uart *) serial->parent.user_data;
rt_size_t recv_total_len, recv_len;
/* disable dma, stop receive data */
DMA_Cmd(uart->dma.rx_ch, DISABLE);
recv_total_len = serial->config.bufsz - DMA_GetCurrDataCounter(uart->dma.rx_ch);
if (recv_total_len > uart->dma.last_recv_len) {
recv_len = recv_total_len - uart->dma.last_recv_len;
} else {
recv_len = recv_total_len;
}
uart->dma.last_recv_len = recv_total_len;
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_DMADONE | (recv_len << 8));
/* read a data for clear receive idle interrupt flag */
USART_ReceiveData(uart->uart_device);
DMA_ClearFlag(uart->dma.rx_gl_flag);
DMA_Cmd(uart->dma.rx_ch, ENABLE);
}
/**
* DMA receive done process. This need add to DMA receive done ISR.
*
* @param serial serial device
*/
static void dma_rx_done_isr(struct rt_serial_device *serial) {
struct stm32_uart *uart = (struct stm32_uart *) serial->parent.user_data;
rt_size_t recv_total_len, recv_len;
/* disable dma, stop receive data */
DMA_Cmd(uart->dma.rx_ch, DISABLE);
recv_total_len = serial->config.bufsz - DMA_GetCurrDataCounter(uart->dma.rx_ch);
if (recv_total_len > uart->dma.last_recv_len) {
recv_len = recv_total_len - uart->dma.last_recv_len;
} else {
recv_len = recv_total_len;
}
uart->dma.last_recv_len = recv_total_len;
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_DMADONE | (recv_len << 8));
DMA_ClearFlag(uart->dma.rx_gl_flag);
/* reload */
DMA_SetCurrDataCounter(uart->dma.rx_ch, serial->config.bufsz);
DMA_Cmd(uart->dma.rx_ch, ENABLE);
}
/**
* Uart common interrupt process. This need add to uart ISR.
*
* @param serial serial device
*/
static void uart_isr(struct rt_serial_device *serial) {
struct stm32_uart *uart = (struct stm32_uart *) serial->parent.user_data;
RT_ASSERT(uart != RT_NULL);
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
}
if(USART_GetITStatus(uart->uart_device, USART_IT_IDLE) != RESET)
{
dma_uart_rx_idle_isr(serial);
}
if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
{
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
}
if (USART_GetFlagStatus(uart->uart_device, USART_FLAG_ORE) == SET)
{
stm32_getc(serial);
}
}
static const struct rt_uart_ops stm32_uart_ops =
{
stm32_configure,
......@@ -162,70 +266,68 @@ struct stm32_uart uart1 =
{
USART1,
USART1_IRQn,
{
DMA1_Channel5,
DMA1_FLAG_GL5,
DMA1_Channel5_IRQn,
0,
},
};
struct rt_serial_device serial1;
void USART1_IRQHandler(void)
{
struct stm32_uart* uart;
/* enter interrupt */
rt_interrupt_enter();
uart = &uart1;
uart_isr(&serial1);
/* leave interrupt */
rt_interrupt_leave();
}
void DMA1_Channel5_IRQHandler(void) {
/* enter interrupt */
rt_interrupt_enter();
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
rt_hw_serial_isr(&serial1, RT_SERIAL_EVENT_RX_IND);
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
}
if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
{
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
}
if (USART_GetFlagStatus(uart->uart_device, USART_FLAG_ORE) == SET)
{
stm32_getc(&serial1);
}
dma_rx_done_isr(&serial1);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* RT_USING_UART1 */
#if defined(RT_USING_UART2)
/* UART1 device driver structure */
/* UART2 device driver structure */
struct stm32_uart uart2 =
{
USART2,
USART2_IRQn,
{
DMA1_Channel6,
DMA1_FLAG_GL6,
DMA1_Channel6_IRQn,
0,
},
};
struct rt_serial_device serial2;
void USART2_IRQHandler(void)
{
struct stm32_uart* uart;
/* enter interrupt */
rt_interrupt_enter();
uart = &uart2;
uart_isr(&serial2);
/* leave interrupt */
rt_interrupt_leave();
}
void DMA1_Channel6_IRQHandler(void) {
/* enter interrupt */
rt_interrupt_enter();
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
rt_hw_serial_isr(&serial2, RT_SERIAL_EVENT_RX_IND);
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
}
if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
{
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
}
if (USART_GetFlagStatus(uart->uart_device, USART_FLAG_ORE) == SET)
{
stm32_getc(&serial2);
}
dma_rx_done_isr(&serial2);
/* leave interrupt */
rt_interrupt_leave();
......@@ -238,32 +340,31 @@ struct stm32_uart uart3 =
{
USART3,
USART3_IRQn,
{
DMA1_Channel3,
DMA1_FLAG_GL3,
DMA1_Channel3_IRQn,
0,
},
};
struct rt_serial_device serial3;
void USART3_IRQHandler(void)
{
struct stm32_uart* uart;
/* enter interrupt */
rt_interrupt_enter();
uart = &uart3;
uart_isr(&serial3);
/* leave interrupt */
rt_interrupt_leave();
}
void DMA1_Channel3_IRQHandler(void) {
/* enter interrupt */
rt_interrupt_enter();
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
rt_hw_serial_isr(&serial3, RT_SERIAL_EVENT_RX_IND);
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
}
if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
{
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
}
if (USART_GetFlagStatus(uart->uart_device, USART_FLAG_ORE) == SET)
{
stm32_getc(&serial3);
}
dma_rx_done_isr(&serial3);
/* leave interrupt */
rt_interrupt_leave();
......@@ -276,69 +377,66 @@ struct stm32_uart uart4 =
{
UART4,
UART4_IRQn,
{
DMA2_Channel3,
DMA2_FLAG_GL3,
DMA2_Channel3_IRQn,
0,
},
};
struct rt_serial_device serial4;
void UART4_IRQHandler(void)
{
struct stm32_uart* uart;
/* enter interrupt */
rt_interrupt_enter();
uart = &uart4;
uart_isr(&serial4);
/* leave interrupt */
rt_interrupt_leave();
}
void DMA2_Channel3_IRQHandler(void) {
/* enter interrupt */
rt_interrupt_enter();
if(USART_GetITStatus(uart->uart_device, USART_IT_RXNE) != RESET)
{
rt_hw_serial_isr(&serial4, RT_SERIAL_EVENT_RX_IND);
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_RXNE);
}
if (USART_GetITStatus(uart->uart_device, USART_IT_TC) != RESET)
{
/* clear interrupt */
USART_ClearITPendingBit(uart->uart_device, USART_IT_TC);
}
if (USART_GetFlagStatus(uart->uart_device, USART_FLAG_ORE) == SET)
{
stm32_getc(&serial4);
}
dma_rx_done_isr(&serial4);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* RT_USING_UART3 */
#endif /* RT_USING_UART4 */
static void RCC_Configuration(void)
{
#if defined(RT_USING_UART1)
/* Enable UART GPIO clocks */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_AFIO, ENABLE);
/* Enable UART clock */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);
#endif /* RT_USING_UART1 */
#if defined(RT_USING_UART2)
/* Enable UART GPIO clocks */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_AFIO, ENABLE);
/* Enable UART clock */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);
#endif /* RT_USING_UART2 */
#if defined(RT_USING_UART3)
/* Enable UART GPIO clocks */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB | RCC_APB2Periph_AFIO, ENABLE);
/* Enable UART clock */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE);
#endif /* RT_USING_UART3 */
#if defined(RT_USING_UART4)
/* Enable UART GPIO clocks */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC | RCC_APB2Periph_AFIO, ENABLE);
/* Enable UART clock */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_UART4, ENABLE);
#endif /* RT_USING_UART4 */
}
static void GPIO_Configuration(void)
......@@ -390,7 +488,6 @@ static void GPIO_Configuration(void)
GPIO_InitStructure.GPIO_Pin = UART4_GPIO_TX;
GPIO_Init(UART4_GPIO, &GPIO_InitStructure);
#endif /* RT_USING_UART4 */
}
static void NVIC_Configuration(struct stm32_uart* uart)
......@@ -405,6 +502,46 @@ static void NVIC_Configuration(struct stm32_uart* uart)
NVIC_Init(&NVIC_InitStructure);
}
static void DMA_Configuration(struct rt_serial_device *serial) {
struct stm32_uart *uart = (struct stm32_uart *) serial->parent.user_data;
struct rt_serial_rx_fifo *rx_fifo = (struct rt_serial_rx_fifo *)serial->serial_rx;
DMA_InitTypeDef DMA_InitStructure;
NVIC_InitTypeDef NVIC_InitStructure;
/* enable transmit idle interrupt */
USART_ITConfig(uart->uart_device, USART_IT_IDLE , ENABLE);
/* DMA clock enable */
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA2, ENABLE);
/* rx dma config */
DMA_DeInit(uart->dma.rx_ch);
DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)&(uart->uart_device->DR);
DMA_InitStructure.DMA_MemoryBaseAddr = (uint32_t) rx_fifo->buffer;
DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
DMA_InitStructure.DMA_BufferSize = serial->config.bufsz;
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
DMA_InitStructure.DMA_Mode = DMA_Mode_Normal;
DMA_InitStructure.DMA_Priority = DMA_Priority_High;
DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
DMA_Init(uart->dma.rx_ch, &DMA_InitStructure);
DMA_ClearFlag(uart->dma.rx_gl_flag);
DMA_ITConfig(uart->dma.rx_ch, DMA_IT_TC, ENABLE);
USART_DMACmd(uart->uart_device, USART_DMAReq_Rx, ENABLE);
DMA_Cmd(uart->dma.rx_ch, ENABLE);
/* rx dma interrupt config */
NVIC_InitStructure.NVIC_IRQChannel = uart->dma.rx_irq_ch;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
}
void rt_hw_usart_init(void)
{
struct stm32_uart* uart;
......@@ -420,11 +557,11 @@ void rt_hw_usart_init(void)
serial1.ops = &stm32_uart_ops;
serial1.config = config;
NVIC_Configuration(&uart1);
NVIC_Configuration(uart);
/* register UART1 device */
rt_hw_serial_register(&serial1, "uart1",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX ,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_DMA_RX,
uart);
#endif /* RT_USING_UART1 */
......@@ -435,11 +572,11 @@ void rt_hw_usart_init(void)
serial2.ops = &stm32_uart_ops;
serial2.config = config;
NVIC_Configuration(&uart2);
NVIC_Configuration(uart);
/* register UART1 device */
/* register UART2 device */
rt_hw_serial_register(&serial2, "uart2",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_DMA_RX,
uart);
#endif /* RT_USING_UART2 */
......@@ -451,11 +588,11 @@ void rt_hw_usart_init(void)
serial3.ops = &stm32_uart_ops;
serial3.config = config;
NVIC_Configuration(&uart3);
NVIC_Configuration(uart);
/* register UART1 device */
/* register UART3 device */
rt_hw_serial_register(&serial3, "uart3",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_DMA_RX,
uart);
#endif /* RT_USING_UART3 */
......@@ -467,12 +604,11 @@ void rt_hw_usart_init(void)
serial4.ops = &stm32_uart_ops;
serial4.config = config;
NVIC_Configuration(&uart4);
NVIC_Configuration(uart);
/* register UART4 device */
rt_hw_serial_register(&serial4, "uart4",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_DMA_RX,
uart);
#endif /* RT_USING_UART4 */
}
components/drivers/serial/serial.c
浏览文件 @ 07c0e130
......@@ -27,9 +27,10 @@
* the size of ring buffer.
* 2014-07-10 bernard rewrite serial framework
* 2014-12-31 bernard use open_flag for poll_tx stream mode.
* 2015-05-19 Quintin fix DMA tx mod tx_dma->activated flag !=RT_FALSE BUG
* 2015-05-19 Quintin fix DMA tx mod tx_dma->activated flag !=RT_FALSE BUG
* in open function.
* 2015-11-10 bernard fix the poll rx issue when there is no data.
* 2016-05-10 armink add fifo mode to DMA rx when serial->config.bufsz != 0.
*/
#include <rthw.h>
......@@ -37,13 +38,13 @@
#include <rtdevice.h>
/*
* Serial poll routines
* Serial poll routines
*/
rt_inline int _serial_poll_rx(struct rt_serial_device *serial, rt_uint8_t *data, int length)
{
int ch;
int size;
RT_ASSERT(serial != RT_NULL);
size = length;
......@@ -52,7 +53,7 @@ rt_inline int _serial_poll_rx(struct rt_serial_device *serial, rt_uint8_t *data,
ch = serial->ops->getc(serial);
if (ch == -1) break;
*data = ch;
*data = ch;
data ++; length --;
if (ch == '\n') break;
......@@ -77,9 +78,9 @@ rt_inline int _serial_poll_tx(struct rt_serial_device *serial, const rt_uint8_t
{
serial->ops->putc(serial, '\r');
}
serial->ops->putc(serial, *data);
++ data;
-- length;
}
......@@ -96,8 +97,8 @@ rt_inline int _serial_int_rx(struct rt_serial_device *serial, rt_uint8_t *data,
struct rt_serial_rx_fifo* rx_fifo;
RT_ASSERT(serial != RT_NULL);
size = length;
size = length;
rx_fifo = (struct rt_serial_rx_fifo*) serial->serial_rx;
RT_ASSERT(rx_fifo != RT_NULL);
......@@ -136,7 +137,7 @@ rt_inline int _serial_int_tx(struct rt_serial_device *serial, const rt_uint8_t *
{
int size;
struct rt_serial_tx_fifo *tx;
RT_ASSERT(serial != RT_NULL);
size = length;
......@@ -157,32 +158,136 @@ rt_inline int _serial_int_tx(struct rt_serial_device *serial, const rt_uint8_t *
return size - length;
}
/**
* Calculate DMA received data length.
*
* @param serial serial device
*
* @return length
*/
static rt_size_t rt_dma_calc_recved_len(struct rt_serial_device *serial) {
static rt_size_t rx_length;
struct rt_serial_rx_fifo *rx_fifo = (struct rt_serial_rx_fifo *)serial->serial_rx;
RT_ASSERT(rx_fifo != RT_NULL);
rx_length = (rx_fifo->put_index >= rx_fifo->get_index)? (rx_fifo->put_index - rx_fifo->get_index):
(serial->config.bufsz - (rx_fifo->get_index - rx_fifo->put_index));
return rx_length;
}
/**
* Read data finish by DMA mode then update the gut index for receive fifo.
*
* @param serial serial device
* @param len get data length for this operate
*/
static void rt_dma_recv_update_get_index(struct rt_serial_device *serial, rt_size_t len) {
struct rt_serial_rx_fifo *rx_fifo = (struct rt_serial_rx_fifo *)serial->serial_rx;
RT_ASSERT(rx_fifo != RT_NULL);
RT_ASSERT(len <= rt_dma_calc_recved_len(serial));
rx_fifo->get_index += len;
if (rx_fifo->get_index > serial->config.bufsz ) {
rx_fifo->get_index -= serial->config.bufsz;
}
}
/**
* DMA received finish then update put index for receive fifo.
*
* @param serial serial device
* @param len received length for this transmit
*/
static void rt_dma_recv_update_put_index(struct rt_serial_device *serial, rt_size_t len) {
struct rt_serial_rx_fifo *rx_fifo = (struct rt_serial_rx_fifo *)serial->serial_rx;
rt_size_t i;
RT_ASSERT(rx_fifo != RT_NULL);
if (rx_fifo->get_index <= rx_fifo->put_index) {
rx_fifo->put_index += len;
/* beyond the fifo end */
if (rx_fifo->put_index >= serial->config.bufsz) {
for (i = 0; i <= len / serial->config.bufsz; i++) {
rx_fifo->put_index -= serial->config.bufsz;
}
/* force overwrite get index */
if (rx_fifo->put_index >= rx_fifo->get_index) {
rx_fifo->get_index = rx_fifo->put_index + 1;
}
}
} else {
rx_fifo->put_index += len;
if(rx_fifo->put_index >= rx_fifo->get_index) {
/* beyond the fifo end */
if(rx_fifo->put_index >= serial->config.bufsz) {
for (i = 0; i <= len / serial->config.bufsz; i++) {
rx_fifo->put_index -= serial->config.bufsz;
}
}
/* force overwrite get index */
rx_fifo->get_index = rx_fifo->put_index + 1;
}
}
}
/*
* Serial DMA routines
*/
rt_inline int _serial_dma_rx(struct rt_serial_device *serial, rt_uint8_t *data, int length)
{
rt_base_t level;
int result = RT_EOK;
struct rt_serial_rx_dma *rx_dma;
RT_ASSERT((serial != RT_NULL) && (data != RT_NULL));
rx_dma = (struct rt_serial_rx_dma*)serial->serial_rx;
RT_ASSERT(rx_dma != RT_NULL);
level = rt_hw_interrupt_disable();
if (rx_dma->activated != RT_TRUE)
{
rx_dma->activated = RT_TRUE;
serial->ops->dma_transmit(serial, data, length, RT_SERIAL_DMA_RX);
}
else result = -RT_EBUSY;
rt_hw_interrupt_enable(level);
if (result == RT_EOK) return length;
if (serial->config.bufsz == 0) {
int result = RT_EOK;
struct rt_serial_rx_dma *rx_dma;
rx_dma = (struct rt_serial_rx_dma*)serial->serial_rx;
RT_ASSERT(rx_dma != RT_NULL);
if (rx_dma->activated != RT_TRUE)
{
rx_dma->activated = RT_TRUE;
RT_ASSERT(serial->ops->dma_transmit != RT_NULL);
serial->ops->dma_transmit(serial, data, length, RT_SERIAL_DMA_RX);
}
else result = -RT_EBUSY;
rt_hw_interrupt_enable(level);
if (result == RT_EOK) return length;
rt_set_errno(result);
return 0;
} else {
struct rt_serial_rx_fifo *rx_fifo = (struct rt_serial_rx_fifo *) serial->serial_rx;
rt_size_t recv_len = 0, fifo_recved_len = rt_dma_calc_recved_len(serial);
RT_ASSERT(rx_fifo != RT_NULL);
rt_set_errno(result);
return 0;
if (length < fifo_recved_len) {
recv_len = length;
} else {
recv_len = fifo_recved_len;
}
if (rx_fifo->get_index + recv_len < serial->config.bufsz) {
rt_memcpy(data, rx_fifo->buffer + rx_fifo->get_index, recv_len);
} else {
rt_memcpy(data, rx_fifo->buffer + rx_fifo->get_index,
serial->config.bufsz - rx_fifo->get_index);
rt_memcpy(data + serial->config.bufsz - rx_fifo->get_index, rx_fifo->buffer,
recv_len + rx_fifo->get_index - serial->config.bufsz);
}
rt_dma_recv_update_get_index(serial, recv_len);
rt_hw_interrupt_enable(level);
return recv_len;
}
}
rt_inline int _serial_dma_tx(struct rt_serial_device *serial, const rt_uint8_t *data, int length)
......@@ -192,8 +297,8 @@ rt_inline int _serial_dma_tx(struct rt_serial_device *serial, const rt_uint8_t *
struct rt_serial_tx_dma *tx_dma;
tx_dma = (struct rt_serial_tx_dma*)(serial->serial_tx);
result = rt_data_queue_push(&(tx_dma->data_queue), data, length, RT_WAITING_FOREVER);
result = rt_data_queue_push(&(tx_dma->data_queue), data, length, RT_WAITING_FOREVER);
if (result == RT_EOK)
{
level = rt_hw_interrupt_disable();
......@@ -203,7 +308,7 @@ rt_inline int _serial_dma_tx(struct rt_serial_device *serial, const rt_uint8_t *
rt_hw_interrupt_enable(level);
/* make a DMA transfer */
serial->ops->dma_transmit(serial, data, length, RT_SERIAL_DMA_TX);
serial->ops->dma_transmit(serial, (rt_uint8_t *)data, length, RT_SERIAL_DMA_TX);
}
else
{
......@@ -250,7 +355,7 @@ static rt_err_t rt_serial_open(struct rt_device *dev, rt_uint16_t oflag)
serial = (struct rt_serial_device *)dev;
/* check device flag with the open flag */
if ((oflag & RT_DEVICE_FLAG_DMA_RX) && !(dev->flag & RT_DEVICE_FLAG_DMA_RX))
if ((oflag & RT_DEVICE_FLAG_DMA_RX) && !(dev->flag & RT_DEVICE_FLAG_DMA_RX))
return -RT_EIO;
if ((oflag & RT_DEVICE_FLAG_DMA_TX) && !(dev->flag & RT_DEVICE_FLAG_DMA_TX))
return -RT_EIO;
......@@ -261,26 +366,41 @@ static rt_err_t rt_serial_open(struct rt_device *dev, rt_uint16_t oflag)
/* get open flags */
dev->open_flag = oflag & 0xff;
/* initialize the Rx/Tx structure according to open flag */
if (serial->serial_rx == RT_NULL)
{
if (oflag & RT_DEVICE_FLAG_DMA_RX)
{
struct rt_serial_rx_dma* rx_dma;
rx_dma = (struct rt_serial_rx_dma*) rt_malloc (sizeof(struct rt_serial_rx_dma));
RT_ASSERT(rx_dma != RT_NULL);
rx_dma->activated = RT_FALSE;
serial->serial_rx = rx_dma;
if (serial->config.bufsz == 0) {
struct rt_serial_rx_dma* rx_dma;
rx_dma = (struct rt_serial_rx_dma*) rt_malloc (sizeof(struct rt_serial_rx_dma));
RT_ASSERT(rx_dma != RT_NULL);
rx_dma->activated = RT_FALSE;
serial->serial_rx = rx_dma;
} else {
struct rt_serial_rx_fifo* rx_fifo;
rx_fifo = (struct rt_serial_rx_fifo*) rt_malloc (sizeof(struct rt_serial_rx_fifo) +
serial->config.bufsz);
RT_ASSERT(rx_fifo != RT_NULL);
rx_fifo->buffer = (rt_uint8_t*) (rx_fifo + 1);
rt_memset(rx_fifo->buffer, 0, serial->config.bufsz);
rx_fifo->put_index = 0;
rx_fifo->get_index = 0;
serial->serial_rx = rx_fifo;
/* configure fifo address and length to low level device */
serial->ops->control(serial, RT_DEVICE_CTRL_CONFIG, (void *) RT_DEVICE_FLAG_DMA_RX);
}
dev->open_flag |= RT_DEVICE_FLAG_DMA_RX;
}
else if (oflag & RT_DEVICE_FLAG_INT_RX)
{
struct rt_serial_rx_fifo* rx_fifo;
rx_fifo = (struct rt_serial_rx_fifo*) rt_malloc (sizeof(struct rt_serial_rx_fifo) +
rx_fifo = (struct rt_serial_rx_fifo*) rt_malloc (sizeof(struct rt_serial_rx_fifo) +
serial->config.bufsz);
RT_ASSERT(rx_fifo != RT_NULL);
rx_fifo->buffer = (rt_uint8_t*) (rx_fifo + 1);
......@@ -308,7 +428,7 @@ static rt_err_t rt_serial_open(struct rt_device *dev, rt_uint16_t oflag)
tx_dma = (struct rt_serial_tx_dma*) rt_malloc (sizeof(struct rt_serial_tx_dma));
RT_ASSERT(tx_dma != RT_NULL);
tx_dma->activated = RT_FALSE;
rt_data_queue_init(&(tx_dma->data_queue), 8, 4, RT_NULL);
serial->serial_tx = tx_dma;
......@@ -346,7 +466,7 @@ static rt_err_t rt_serial_close(struct rt_device *dev)
/* this device has more reference count */
if (dev->ref_count > 1) return RT_EOK;
if (dev->open_flag & RT_DEVICE_FLAG_INT_RX)
{
struct rt_serial_rx_fifo* rx_fifo;
......@@ -362,12 +482,23 @@ static rt_err_t rt_serial_close(struct rt_device *dev)
}
else if (dev->open_flag & RT_DEVICE_FLAG_DMA_RX)
{
struct rt_serial_rx_dma* rx_dma;
if (serial->config.bufsz == 0) {
struct rt_serial_rx_dma* rx_dma;
rx_dma = (struct rt_serial_rx_dma*)serial->serial_tx;
RT_ASSERT(rx_dma != RT_NULL);
rx_dma = (struct rt_serial_rx_dma*)serial->serial_rx;
RT_ASSERT(rx_dma != RT_NULL);
rt_free(rx_dma);
} else {
struct rt_serial_rx_fifo* rx_fifo;
rt_free(rx_dma);
rx_fifo = (struct rt_serial_rx_fifo*)serial->serial_rx;
RT_ASSERT(rx_fifo != RT_NULL);
rt_free(rx_fifo);
}
/* configure low level device */
serial->ops->control(serial, RT_DEVICE_CTRL_CLR_INT, (void *) RT_DEVICE_FLAG_DMA_RX);
serial->serial_rx = RT_NULL;
dev->open_flag &= ~RT_DEVICE_FLAG_DMA_RX;
}
......@@ -376,7 +507,7 @@ static rt_err_t rt_serial_close(struct rt_device *dev)
{
struct rt_serial_tx_fifo* tx_fifo;
tx_fifo = (struct rt_serial_tx_fifo*)serial->serial_rx;
tx_fifo = (struct rt_serial_tx_fifo*)serial->serial_tx;
RT_ASSERT(tx_fifo != RT_NULL);
rt_free(tx_fifo);
......@@ -534,30 +665,30 @@ void rt_hw_serial_isr(struct rt_serial_device *serial, int event)
ch = serial->ops->getc(serial);
if (ch == -1) break;
/* disable interrupt */
level = rt_hw_interrupt_disable();
rx_fifo->buffer[rx_fifo->put_index] = ch;
rx_fifo->put_index += 1;
if (rx_fifo->put_index >= serial->config.bufsz) rx_fifo->put_index = 0;
/* if the next position is read index, discard this 'read char' */
if (rx_fifo->put_index == rx_fifo->get_index)
{
rx_fifo->get_index += 1;
if (rx_fifo->get_index >= serial->config.bufsz) rx_fifo->get_index = 0;
}
/* enable interrupt */
rt_hw_interrupt_enable(level);
}
/* invoke callback */
if (serial->parent.rx_indicate != RT_NULL)
{
rt_size_t rx_length;
/* get rx length */
level = rt_hw_interrupt_disable();
rx_length = (rx_fifo->put_index >= rx_fifo->get_index)? (rx_fifo->put_index - rx_fifo->get_index):
......@@ -584,19 +715,19 @@ void rt_hw_serial_isr(struct rt_serial_device *serial, int event)
struct rt_serial_tx_dma* tx_dma;
tx_dma = (struct rt_serial_tx_dma*) serial->serial_tx;
rt_data_queue_pop(&(tx_dma->data_queue), &last_data_ptr, &data_size, 0);
if (rt_data_queue_peak(&(tx_dma->data_queue), &data_ptr, &data_size) == RT_EOK)
{
/* transmit next data node */
tx_dma->activated = RT_TRUE;
serial->ops->dma_transmit(serial, data_ptr, data_size, RT_SERIAL_DMA_TX);
serial->ops->dma_transmit(serial, (rt_uint8_t *)data_ptr, data_size, RT_SERIAL_DMA_TX);
}
else
{
tx_dma->activated = RT_FALSE;
}
/* invoke callback */
if (serial->parent.tx_complete != RT_NULL)
{
......@@ -607,13 +738,27 @@ void rt_hw_serial_isr(struct rt_serial_device *serial, int event)
case RT_SERIAL_EVENT_RX_DMADONE:
{
int length;
struct rt_serial_rx_dma* rx_dma;
rx_dma = (struct rt_serial_rx_dma*)serial->serial_rx;
/* get DMA rx length */
length = (event & (~0xff)) >> 8;
serial->parent.rx_indicate(&(serial->parent), length);
rx_dma->activated = RT_FALSE;
if (serial->config.bufsz == 0) {
struct rt_serial_rx_dma* rx_dma;
rx_dma = (struct rt_serial_rx_dma*)serial->serial_rx;
RT_ASSERT(rx_dma != RT_NULL);
RT_ASSERT(serial->parent.rx_indicate != RT_NULL);
serial->parent.rx_indicate(&(serial->parent), length);
rx_dma->activated = RT_FALSE;
} else {
/* update fifo put index */
rt_dma_recv_update_put_index(serial, length);
/* invoke callback */
if (serial->parent.rx_indicate != RT_NULL) {
serial->parent.rx_indicate(&(serial->parent), rt_dma_calc_recved_len(serial));
}
}
break;
}
}
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或