[bsp/at32] 1.add support for AT-START-F407 board, 2.add eth and rtc driver

bsp/at32/Libraries/rt_drivers/SConscript

@@ -27,6 +27,9 @@ if GetDepend(['BSP_USING_HWTIMER']):
 if GetDepend(['BSP_USING_SPI']):
     src += ['drv_spi.c']
 
+if GetDepend(['BSP_USING_ETH', 'RT_USING_LWIP']):
+    src += ['drv_eth.c']
+
 if GetDepend(['RT_USING_I2C', 'RT_USING_I2C_BITOPS']):
     if GetDepend('BSP_USING_I2C1') or GetDepend('BSP_USING_I2C2') or GetDepend('BSP_USING_I2C3') or GetDepend('BSP_USING_I2C4'):
         src += ['drv_soft_i2c.c']
@@ -37,7 +40,7 @@ if GetDepend(['BSP_USING_ADC']):
 if GetDepend('BSP_USING_SRAM'):
     src += ['drv_sram.c']
 
-if GetDepend('BSP_USING_ONCHIP_RTC'):
+if GetDepend('BSP_USING_RTC'):
     src += ['drv_rtc.c']
 
 if GetDepend(['BSP_USING_WDT']):

bsp/at32/Libraries/rt_drivers/drv_eth.h

+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-05-19     Joe          first version
+ */
+
+#ifndef __DRV_ETH_H__
+#define __DRV_ETH_H__
+
+#include <rtthread.h>
+#include <rthw.h>
+#include <rtdevice.h>
+#include <board.h>
+
+/* The PHY basic control register */
+#define PHY_BASIC_CONTROL_REG       0x00U
+#define PHY_RESET_MASK              (1<<15)
+#define PHY_AUTO_NEGOTIATION_MASK   (1<<12)
+
+/* The PHY basic status register */
+#define PHY_BASIC_STATUS_REG        0x01U
+#define PHY_LINKED_STATUS_MASK      (1<<2)
+#define PHY_AUTONEGO_COMPLETE_MASK  (1<<5)
+
+/* The PHY ID one register */
+#define PHY_ID1_REG                 0x02U
+
+/* The PHY ID two register */
+#define PHY_ID2_REG                 0x03U
+
+/* The PHY auto-negotiate advertise register */
+#define PHY_AUTONEG_ADVERTISE_REG   0x04U
+
+#ifdef PHY_USING_LAN8720A
+/*  The PHY interrupt source flag register. */
+#define PHY_INTERRUPT_FLAG_REG      0x1DU
+/*  The PHY interrupt mask register. */
+#define PHY_INTERRUPT_MASK_REG      0x1EU
+#define PHY_LINK_DOWN_MASK          (1<<4)
+#define PHY_AUTO_NEGO_COMPLETE_MASK (1<<6)
+
+/*  The PHY status register. */
+#define PHY_Status_REG              0x1FU
+#define PHY_10M_MASK                (1<<2)
+#define PHY_100M_MASK               (1<<3)
+#define PHY_FULL_DUPLEX_MASK        (1<<4)
+#define PHY_Status_SPEED_10M(sr)    ((sr) & PHY_10M_MASK)
+#define PHY_Status_SPEED_100M(sr)   ((sr) & PHY_100M_MASK)
+#define PHY_Status_FULL_DUPLEX(sr)  ((sr) & PHY_FULL_DUPLEX_MASK)
+#endif /* PHY_USING_LAN8720A */
+
+#ifdef PHY_USING_DM9161CEP
+#define PHY_Status_REG              0x11U
+#define PHY_10M_MASK                ((1<<12) || (1<<13))
+#define PHY_100M_MASK               ((1<<14) || (1<<15))
+#define PHY_FULL_DUPLEX_MASK        ((1<<15) || (1<<13))
+#define PHY_Status_SPEED_10M(sr)    ((sr) & PHY_10M_MASK)
+#define PHY_Status_SPEED_100M(sr)   ((sr) & PHY_100M_MASK)
+#define PHY_Status_FULL_DUPLEX(sr)  ((sr) & PHY_FULL_DUPLEX_MASK)
+/*  The PHY interrupt source flag register. */
+#define PHY_INTERRUPT_FLAG_REG      0x15U
+/*  The PHY interrupt mask register. */
+#define PHY_INTERRUPT_MASK_REG      0x15U
+#define PHY_LINK_CHANGE_FLAG        (1<<2)
+#define PHY_LINK_CHANGE_MASK        (1<<9)
+#define PHY_INT_MASK                0
+
+#endif /* PHY_USING_DM9161CEP */
+
+#ifdef PHY_USING_DP83848C
+#define PHY_Status_REG              0x10U
+#define PHY_10M_MASK                (1<<1)
+#define PHY_FULL_DUPLEX_MASK        (1<<2)
+#define PHY_Status_SPEED_10M(sr)    ((sr) & PHY_10M_MASK)
+#define PHY_Status_SPEED_100M(sr)   (!PHY_Status_SPEED_10M(sr))
+#define PHY_Status_FULL_DUPLEX(sr)  ((sr) & PHY_FULL_DUPLEX_MASK)
+/*  The PHY interrupt source flag register. */
+#define PHY_INTERRUPT_FLAG_REG      0x12U
+#define PHY_LINK_CHANGE_FLAG        (1<<13)
+/*  The PHY interrupt control register. */
+#define PHY_INTERRUPT_CTRL_REG      0x11U
+#define PHY_INTERRUPT_EN            ((1<<0)|(1<<1))
+/*  The PHY interrupt mask register. */
+#define PHY_INTERRUPT_MASK_REG      0x12U
+#define PHY_INT_MASK                (1<<5)
+#endif /* PHY_USING_DP83848C */
+
+#endif /* __DRV_ETH_H__ */

bsp/at32/Libraries/rt_drivers/drv_rtc.c

+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date         Author        Notes
+ * 2020-05-19   shelton       first version
+ */
+
+#include "board.h"
+#include <rtthread.h>
+
+#ifdef BSP_USING_RTC
+
+#ifndef BKP_DR1
+#define BKP_DR1 RT_NULL
+#endif
+
+//#define DRV_DEBUG
+#define LOG_TAG             "drv.rtc"
+#include <drv_log.h>
+
+#define BKUP_REG_DATA 0xA5A5
+
+static struct rt_device rtc;
+
+static time_t get_rtc_timestamp(void)
+{
+#ifdef SOC_SERIES_AT32F415
+    struct tm tm_new;
+    ERTC_TimeType ERTC_TimeStruct;
+    ERTC_DateType ERTC_DateStruct;
+
+    ERTC_GetTimeValue(ERTC_Format_BIN, &ERTC_TimeStruct);
+    ERTC_GetDateValue(ERTC_Format_BIN, &ERTC_DateStruct);
+    tm_new.tm_sec  = ERTC_TimeStruct.ERTC_Seconds;
+    tm_new.tm_min  = ERTC_TimeStruct.ERTC_Minutes;
+    tm_new.tm_hour = ERTC_TimeStruct.ERTC_Hours;
+    tm_new.tm_mday = ERTC_DateStruct.ERTC_Date;
+    tm_new.tm_mon  = ERTC_DateStruct.ERTC_Month - 1;
+    tm_new.tm_year = ERTC_DateStruct.ERTC_Year + 100;
+
+    LOG_D("get rtc time.");
+    return mktime(&tm_new);
+#else
+    return RTC_GetCounter();
+#endif
+}
+
+static rt_err_t set_rtc_time_stamp(time_t time_stamp)
+{
+#ifdef SOC_SERIES_AT32F415
+    ERTC_TimeType  ERTC_TimeStructure;
+    ERTC_DateType  ERTC_DateStructure;
+
+    struct tm *p_tm;
+
+    p_tm = localtime(&time_stamp);
+    if (p_tm->tm_year < 100)
+    {
+        return -RT_ERROR;
+    }
+    ERTC_TimeStructure.ERTC_Seconds = p_tm->tm_sec ;
+    ERTC_TimeStructure.ERTC_Minutes = p_tm->tm_min ;
+    ERTC_TimeStructure.ERTC_Hours   = p_tm->tm_hour;
+    ERTC_DateStructure.ERTC_Date    = p_tm->tm_mday;
+    ERTC_DateStructure.ERTC_Month   = p_tm->tm_mon + 1 ;
+    ERTC_DateStructure.ERTC_Year    = p_tm->tm_year - 100;
+    ERTC_DateStructure.ERTC_WeekDay = p_tm->tm_wday + 1;
+
+    if (ERTC_SetTimeValue(ERTC_Format_BIN, &ERTC_TimeStructure) != SUCCESS)
+    {
+        return -RT_ERROR;
+    }
+    if (ERTC_SetDateValue(ERTC_Format_BIN, &ERTC_DateStructure) != SUCCESS)
+    {
+        return -RT_ERROR;
+    }
+#else
+	/* Set the RTC counter value */
+	RTC_SetCounter(time_stamp);
+	/* Wait until last write operation on RTC registers has finished */
+	RTC_WaitForLastTask();
+#endif /* SOC_SERIES_AT32F415 */
+    LOG_D("set rtc time.");
+#ifdef SOC_SERIES_AT32F415
+    ERTC_WriteBackupRegister(ERTC_BKP_DT0, BKUP_REG_DATA);
+#else
+    BKP_WriteBackupReg(BKP_DT1, BKUP_REG_DATA);
+#endif
+    return RT_EOK;
+}
+
+static void rt_rtc_init(void)
+{
+#if defined (SOC_SERIES_AT32F415)
+    RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_PWR, ENABLE);
+#else
+    RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_PWR | RCC_APB1PERIPH_BKP, ENABLE);
+#endif
+
+#ifdef BSP_RTC_USING_LSI
+    RCC_LSICmd(ENABLE);
+    while(RCC_GetFlagStatus(RCC_FLAG_LSISTBL) == RESET);
+#else
+    PWR_BackupAccessCtrl(ENABLE);
+    RCC_LSEConfig(RCC_LSE_ENABLE);
+    while(RCC_GetFlagStatus(RCC_FLAG_LSESTBL) == RESET);
+#endif /* BSP_RTC_USING_LSI */
+}
+
+static rt_err_t rt_rtc_config(struct rt_device *dev)
+{
+#if defined (SOC_SERIES_AT32F415)
+    ERTC_InitType ERTC_InitStructure;
+#endif
+    /* Allow access to BKP Domain */
+    PWR_BackupAccessCtrl(ENABLE); 
+
+#ifdef SOC_SERIES_AT32F415
+  #ifdef BSP_RTC_USING_LSI
+    RCC_ERTCCLKConfig(RCC_ERTCCLKSelection_LSI);
+    RCC_ERTCCLKCmd(ENABLE);
+  #else
+    RCC_ERTCCLKConfig(RCC_ERTCCLKSelection_LSE);
+    RCC_ERTCCLKCmd(ENABLE);
+  #endif /* BSP_RTC_USING_LSI */
+    /* Wait for ERTC APB registers synchronisation */
+    ERTC_WaitForSynchro();
+#else
+  #ifdef BSP_RTC_USING_LSI
+    RCC_RTCCLKConfig(RCC_RTCCLKSelection_LSI);
+    RCC_RTCCLKCmd(ENABLE);
+  #else
+    RCC_RTCCLKConfig(RCC_RTCCLKSelection_LSE);
+    RCC_RTCCLKCmd(ENABLE);
+  #endif /* BSP_RTC_USING_LSI */
+    /* Wait for RTC registers synchronization */
+    RTC_WaitForSynchro();
+    /* Wait until last write operation on RTC registers has finished */
+    RTC_WaitForLastTask();
+#endif /* SOC_SERIES_AT32F415 */
+
+#ifdef SOC_SERIES_AT32F415
+    if (ERTC_ReadBackupRegister(BKP_DT1)!= BKUP_REG_DATA)
+#else
+    if (BKP_ReadBackupReg(BKP_DT1) != BKUP_REG_DATA)
+#endif
+  	{
+        LOG_I("RTC hasn't been configured, please use <date> command to config.");
+#ifdef SOC_SERIES_AT32F415
+        /* Configure the ERTC data register and ERTC prescaler */
+        ERTC_InitStructure.ERTC_AsynchPrediv = 0x7F;
+        ERTC_InitStructure.ERTC_SynchPrediv = 0xFF;
+        ERTC_InitStructure.ERTC_HourFormat = ERTC_HourFormat_24;
+        ERTC_Init(&ERTC_InitStructure);
+#else
+        /* Set RTC prescaler: set RTC period to 1sec */
+        RTC_SetDIV(32767);
+        /* Wait until last write operation on RTC registers has finished */
+        RTC_WaitForLastTask();
+#endif
+    }
+    return RT_EOK;
+}
+
+static rt_err_t rt_rtc_control(rt_device_t dev, int cmd, void *args)
+{
+    rt_err_t result = RT_EOK;
+    RT_ASSERT(dev != RT_NULL);
+    switch (cmd)
+    {
+    case RT_DEVICE_CTRL_RTC_GET_TIME:
+        *(rt_uint32_t *)args = get_rtc_timestamp();
+        LOG_D("RTC: get rtc_time %x\n", *(rt_uint32_t *)args);
+        break;
+
+    case RT_DEVICE_CTRL_RTC_SET_TIME:
+        if (set_rtc_time_stamp(*(rt_uint32_t *)args))
+        {
+            result = -RT_ERROR;
+        }
+        LOG_D("RTC: set rtc_time %x\n", *(rt_uint32_t *)args);
+        break;
+    }
+
+    return result;
+}
+
+#ifdef RT_USING_DEVICE_OPS
+const static struct rt_device_ops rtc_ops =
+{
+    RT_NULL,
+    RT_NULL,
+    RT_NULL,
+    RT_NULL,
+    RT_NULL,
+    rt_rtc_control
+};
+#endif
+
+static rt_err_t rt_hw_rtc_register(rt_device_t device, const char *name, rt_uint32_t flag)
+{
+    RT_ASSERT(device != RT_NULL);
+
+    rt_rtc_init();
+    if (rt_rtc_config(device) != RT_EOK)
+    {
+        return -RT_ERROR;
+    }
+#ifdef RT_USING_DEVICE_OPS
+    device->ops         = &rtc_ops;
+#else
+    device->init        = RT_NULL;
+    device->open        = RT_NULL;
+    device->close       = RT_NULL;
+    device->read        = RT_NULL;
+    device->write       = RT_NULL;
+    device->control     = rt_rtc_control;
+#endif
+    device->type        = RT_Device_Class_RTC;
+    device->rx_indicate = RT_NULL;
+    device->tx_complete = RT_NULL;
+    device->user_data   = RT_NULL;
+
+    /* register a character device */
+    return rt_device_register(device, name, flag);
+}
+
+int rt_hw_rtc_init(void)
+{
+    rt_err_t result;
+    result = rt_hw_rtc_register(&rtc, "rtc", RT_DEVICE_FLAG_RDWR);
+    if (result != RT_EOK)
+    {
+        LOG_E("rtc register err code: %d", result);
+        return result;
+    }
+    LOG_D("rtc init success");
+    return RT_EOK;
+}
+
+INIT_DEVICE_EXPORT(rt_hw_rtc_init);
+
+#endif /* BSP_USING_RTC */

bsp/at32/at32f403a-start/README.md

@@ -47,6 +47,7 @@ AT32F403A-START板级包支持MDK4﹑MDK5﹑IAR开发环境和GCC编译器，以
 | HWTIMER   | 支持     | TMR3/4/5                   |
 | SDIO      | 支持     | SDIO1                      |
 | WDT       | 支持     |                            |
+| RTC       | 支持     |                            |
 
 ### IO在板级支持包中的映射情况
 

bsp/at32/at32f403a-start/board/Kconfig

@@ -24,6 +24,24 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_PIN
         default y
 
+    menuconfig BSP_USING_RTC
+        bool "Enable RTC"
+        select RT_USING_RTC
+        select RT_USING_LIBC
+        default n
+        if BSP_USING_RTC
+            choice
+                prompt "Select clock source"
+                default BSP_RTC_USING_LSE
+
+                config BSP_RTC_USING_LSE
+                    bool "RTC USING LSE"
+
+                config BSP_RTC_USING_LSI
+                    bool "RTC USING LSI"
+            endchoice
+        endif
+
     menuconfig BSP_USING_UART
         bool "Enable UART"
         default y

bsp/at32/at32f403a-start/board/msp/at32_msp.c

@@ -23,7 +23,7 @@
 #include <rtthread.h>
 #include "at32_msp.h"
 
-#ifdef BSP_USING_SERIAL
+#ifdef BSP_USING_UART
 void at32_msp_usart_init(void *Instance)
 {
     GPIO_InitType GPIO_InitStruct;

bsp/at32/at32f407-start/.config

+#
+# Automatically generated file; DO NOT EDIT.
+# RT-Thread Configuration
+#
+
+#
+# RT-Thread Kernel
+#
+CONFIG_RT_NAME_MAX=8
+# CONFIG_RT_USING_ARCH_DATA_TYPE is not set
+# CONFIG_RT_USING_SMP is not set
+CONFIG_RT_ALIGN_SIZE=4
+# CONFIG_RT_THREAD_PRIORITY_8 is not set
+CONFIG_RT_THREAD_PRIORITY_32=y
+# CONFIG_RT_THREAD_PRIORITY_256 is not set
+CONFIG_RT_THREAD_PRIORITY_MAX=32
+CONFIG_RT_TICK_PER_SECOND=1000
+CONFIG_RT_USING_OVERFLOW_CHECK=y
+CONFIG_RT_USING_HOOK=y
+CONFIG_RT_USING_IDLE_HOOK=y
+CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
+CONFIG_IDLE_THREAD_STACK_SIZE=256
+CONFIG_RT_USING_TIMER_SOFT=y
+CONFIG_RT_TIMER_THREAD_PRIO=4
+CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
+CONFIG_RT_DEBUG=y
+CONFIG_RT_DEBUG_COLOR=y
+# CONFIG_RT_DEBUG_INIT_CONFIG is not set
+# CONFIG_RT_DEBUG_THREAD_CONFIG is not set
+# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
+# CONFIG_RT_DEBUG_IPC_CONFIG is not set
+# CONFIG_RT_DEBUG_TIMER_CONFIG is not set
+# CONFIG_RT_DEBUG_IRQ_CONFIG is not set
+# CONFIG_RT_DEBUG_MEM_CONFIG is not set
+# CONFIG_RT_DEBUG_SLAB_CONFIG is not set
+# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set
+# CONFIG_RT_DEBUG_MODULE_CONFIG is not set
+
+#
+# Inter-Thread communication
+#
+CONFIG_RT_USING_SEMAPHORE=y
+CONFIG_RT_USING_MUTEX=y
+CONFIG_RT_USING_EVENT=y
+CONFIG_RT_USING_MAILBOX=y
+CONFIG_RT_USING_MESSAGEQUEUE=y
+# CONFIG_RT_USING_SIGNALS is not set
+
+#
+# Memory Management
+#
+CONFIG_RT_USING_MEMPOOL=y
+CONFIG_RT_USING_MEMHEAP=y
+# CONFIG_RT_USING_NOHEAP is not set
+CONFIG_RT_USING_SMALL_MEM=y
+# CONFIG_RT_USING_SLAB is not set
+# CONFIG_RT_USING_MEMHEAP_AS_HEAP is not set
+# CONFIG_RT_USING_MEMTRACE is not set
+CONFIG_RT_USING_HEAP=y
+
+#
+# Kernel Device Object
+#
+CONFIG_RT_USING_DEVICE=y
+# CONFIG_RT_USING_DEVICE_OPS is not set
+# CONFIG_RT_USING_INTERRUPT_INFO is not set
+CONFIG_RT_USING_CONSOLE=y
+CONFIG_RT_CONSOLEBUF_SIZE=128
+CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
+CONFIG_RT_VER_NUM=0x40003
+CONFIG_ARCH_ARM=y
+CONFIG_RT_USING_CPU_FFS=y
+CONFIG_ARCH_ARM_CORTEX_M=y
+CONFIG_ARCH_ARM_CORTEX_M4=y
+# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
+
+#
+# RT-Thread Components
+#
+CONFIG_RT_USING_COMPONENTS_INIT=y
+CONFIG_RT_USING_USER_MAIN=y
+CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048
+CONFIG_RT_MAIN_THREAD_PRIORITY=10
+
+#
+# C++ features
+#
+# CONFIG_RT_USING_CPLUSPLUS is not set
+
+#
+# Command shell
+#
+CONFIG_RT_USING_FINSH=y
+CONFIG_FINSH_THREAD_NAME="tshell"
+CONFIG_FINSH_USING_HISTORY=y
+CONFIG_FINSH_HISTORY_LINES=5
+CONFIG_FINSH_USING_SYMTAB=y
+CONFIG_FINSH_USING_DESCRIPTION=y
+# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
+CONFIG_FINSH_THREAD_PRIORITY=20
+CONFIG_FINSH_THREAD_STACK_SIZE=4096
+CONFIG_FINSH_CMD_SIZE=80
+# CONFIG_FINSH_USING_AUTH is not set
+CONFIG_FINSH_USING_MSH=y
+CONFIG_FINSH_USING_MSH_DEFAULT=y
+CONFIG_FINSH_USING_MSH_ONLY=y
+CONFIG_FINSH_ARG_MAX=10
+
+#
+# Device virtual file system
+#
+CONFIG_RT_USING_DFS=y
+CONFIG_DFS_USING_WORKDIR=y
+CONFIG_DFS_FILESYSTEMS_MAX=2
+CONFIG_DFS_FILESYSTEM_TYPES_MAX=2
+CONFIG_DFS_FD_MAX=16
+# CONFIG_RT_USING_DFS_MNTTABLE is not set
+CONFIG_RT_USING_DFS_ELMFAT=y
+
+#
+# elm-chan's FatFs, Generic FAT Filesystem Module
+#
+CONFIG_RT_DFS_ELM_CODE_PAGE=437
+CONFIG_RT_DFS_ELM_WORD_ACCESS=y
+# CONFIG_RT_DFS_ELM_USE_LFN_0 is not set
+# CONFIG_RT_DFS_ELM_USE_LFN_1 is not set
+# CONFIG_RT_DFS_ELM_USE_LFN_2 is not set
+CONFIG_RT_DFS_ELM_USE_LFN_3=y
+CONFIG_RT_DFS_ELM_USE_LFN=3
+CONFIG_RT_DFS_ELM_MAX_LFN=255
+CONFIG_RT_DFS_ELM_DRIVES=2
+CONFIG_RT_DFS_ELM_MAX_SECTOR_SIZE=512
+# CONFIG_RT_DFS_ELM_USE_ERASE is not set
+CONFIG_RT_DFS_ELM_REENTRANT=y
+CONFIG_RT_USING_DFS_DEVFS=y
+# CONFIG_RT_USING_DFS_ROMFS is not set
+# CONFIG_RT_USING_DFS_RAMFS is not set
+# CONFIG_RT_USING_DFS_UFFS is not set
+# CONFIG_RT_USING_DFS_JFFS2 is not set
+
+#
+# Device Drivers
+#
+CONFIG_RT_USING_DEVICE_IPC=y
+CONFIG_RT_PIPE_BUFSZ=512
+# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set
+CONFIG_RT_USING_SERIAL=y
+# CONFIG_RT_SERIAL_USING_DMA is not set
+CONFIG_RT_SERIAL_RB_BUFSZ=64
+# CONFIG_RT_USING_CAN is not set
+CONFIG_RT_USING_HWTIMER=y
+# CONFIG_RT_USING_CPUTIME is not set
+CONFIG_RT_USING_I2C=y
+# CONFIG_RT_I2C_DEBUG is not set
+CONFIG_RT_USING_I2C_BITOPS=y
+# CONFIG_RT_I2C_BITOPS_DEBUG is not set
+CONFIG_RT_USING_PIN=y
+CONFIG_RT_USING_ADC=y
+CONFIG_RT_USING_PWM=y
+# CONFIG_RT_USING_MTD_NOR is not set
+# CONFIG_RT_USING_MTD_NAND is not set
+# CONFIG_RT_USING_PM is not set
+CONFIG_RT_USING_RTC=y
+# CONFIG_RT_USING_ALARM is not set
+# CONFIG_RT_USING_SOFT_RTC is not set
+CONFIG_RT_USING_SDIO=y
+CONFIG_RT_SDIO_STACK_SIZE=512
+CONFIG_RT_SDIO_THREAD_PRIORITY=15
+CONFIG_RT_MMCSD_STACK_SIZE=1024
+CONFIG_RT_MMCSD_THREAD_PREORITY=22
+CONFIG_RT_MMCSD_MAX_PARTITION=16
+# CONFIG_RT_SDIO_DEBUG is not set
+CONFIG_RT_USING_SPI=y
+# CONFIG_RT_USING_QSPI is not set
+# CONFIG_RT_USING_SPI_MSD is not set
+# CONFIG_RT_USING_SFUD is not set
+# CONFIG_RT_USING_ENC28J60 is not set
+# CONFIG_RT_USING_SPI_WIFI is not set
+# CONFIG_RT_USING_WDT is not set
+# CONFIG_RT_USING_AUDIO is not set
+# CONFIG_RT_USING_SENSOR is not set
+# CONFIG_RT_USING_TOUCH is not set
+# CONFIG_RT_USING_HWCRYPTO is not set
+# CONFIG_RT_USING_PULSE_ENCODER is not set
+# CONFIG_RT_USING_INPUT_CAPTURE is not set
+# CONFIG_RT_USING_WIFI is not set
+
+#
+# Using USB
+#
+# CONFIG_RT_USING_USB_HOST is not set
+# CONFIG_RT_USING_USB_DEVICE is not set
+
+#
+# POSIX layer and C standard library
+#
+CONFIG_RT_USING_LIBC=y
+# CONFIG_RT_USING_PTHREADS is not set
+CONFIG_RT_USING_POSIX=y
+# CONFIG_RT_USING_POSIX_MMAP is not set
+# CONFIG_RT_USING_POSIX_TERMIOS is not set
+# CONFIG_RT_USING_POSIX_AIO is not set
+# CONFIG_RT_USING_MODULE is not set
+
+#
+# Network
+#
+
+#
+# Socket abstraction layer
+#
+# CONFIG_RT_USING_SAL is not set
+
+#
+# Network interface device
+#
+# CONFIG_RT_USING_NETDEV is not set
+
+#
+# light weight TCP/IP stack
+#
+# CONFIG_RT_USING_LWIP is not set
+
+#
+# AT commands
+#
+# CONFIG_RT_USING_AT is not set
+
+#
+# VBUS(Virtual Software BUS)
+#
+# CONFIG_RT_USING_VBUS is not set
+
+#
+# Utilities
+#
+# CONFIG_RT_USING_RYM is not set
+# CONFIG_RT_USING_ULOG is not set
+# CONFIG_RT_USING_UTEST is not set
+# CONFIG_RT_USING_LWP is not set
+
+#
+# RT-Thread online packages
+#
+
+#
+# IoT - internet of things
+#
+# CONFIG_PKG_USING_PAHOMQTT is not set
+# CONFIG_PKG_USING_WEBCLIENT is not set
+# CONFIG_PKG_USING_WEBNET is not set
+# CONFIG_PKG_USING_MONGOOSE is not set
+# CONFIG_PKG_USING_MYMQTT is not set
+# CONFIG_PKG_USING_KAWAII_MQTT is not set
+# CONFIG_PKG_USING_WEBTERMINAL is not set
+# CONFIG_PKG_USING_CJSON is not set
+# CONFIG_PKG_USING_JSMN is not set
+# CONFIG_PKG_USING_LIBMODBUS is not set
+# CONFIG_PKG_USING_FREEMODBUS is not set
+# CONFIG_PKG_USING_LJSON is not set
+# CONFIG_PKG_USING_EZXML is not set
+# CONFIG_PKG_USING_NANOPB is not set
+
+#
+# Wi-Fi
+#
+
+#
+# Marvell WiFi
+#
+# CONFIG_PKG_USING_WLANMARVELL is not set
+
+#
+# Wiced WiFi
+#
+# CONFIG_PKG_USING_WLAN_WICED is not set
+# CONFIG_PKG_USING_RW007 is not set
+# CONFIG_PKG_USING_COAP is not set
+# CONFIG_PKG_USING_NOPOLL is not set
+# CONFIG_PKG_USING_NETUTILS is not set
+# CONFIG_PKG_USING_PPP_DEVICE is not set
+# CONFIG_PKG_USING_AT_DEVICE is not set
+# CONFIG_PKG_USING_ATSRV_SOCKET is not set
+# CONFIG_PKG_USING_WIZNET is not set
+
+#
+# IoT Cloud
+#
+# CONFIG_PKG_USING_ONENET is not set
+# CONFIG_PKG_USING_GAGENT_CLOUD is not set
+# CONFIG_PKG_USING_ALI_IOTKIT is not set
+# CONFIG_PKG_USING_AZURE is not set
+# CONFIG_PKG_USING_TENCENT_IOTHUB is not set
+# CONFIG_PKG_USING_JIOT-C-SDK is not set
+# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set
+# CONFIG_PKG_USING_JOYLINK is not set
+# CONFIG_PKG_USING_NIMBLE is not set
+# CONFIG_PKG_USING_OTA_DOWNLOADER is not set
+# CONFIG_PKG_USING_IPMSG is not set
+# CONFIG_PKG_USING_LSSDP is not set
+# CONFIG_PKG_USING_AIRKISS_OPEN is not set
+# CONFIG_PKG_USING_LIBRWS is not set
+# CONFIG_PKG_USING_TCPSERVER is not set
+# CONFIG_PKG_USING_PROTOBUF_C is not set
+# CONFIG_PKG_USING_ONNX_PARSER is not set
+# CONFIG_PKG_USING_ONNX_BACKEND is not set
+# CONFIG_PKG_USING_DLT645 is not set
+# CONFIG_PKG_USING_QXWZ is not set
+# CONFIG_PKG_USING_SMTP_CLIENT is not set
+# CONFIG_PKG_USING_ABUP_FOTA is not set
+# CONFIG_PKG_USING_LIBCURL2RTT is not set
+# CONFIG_PKG_USING_CAPNP is not set
+# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set
+# CONFIG_PKG_USING_AGILE_TELNET is not set
+
+#
+# security packages
+#
+# CONFIG_PKG_USING_MBEDTLS is not set
+# CONFIG_PKG_USING_libsodium is not set
+# CONFIG_PKG_USING_TINYCRYPT is not set
+# CONFIG_PKG_USING_TFM is not set
+
+#
+# language packages
+#
+# CONFIG_PKG_USING_LUA is not set
+# CONFIG_PKG_USING_JERRYSCRIPT is not set
+# CONFIG_PKG_USING_MICROPYTHON is not set
+
+#
+# multimedia packages
+#
+# CONFIG_PKG_USING_OPENMV is not set
+# CONFIG_PKG_USING_MUPDF is not set
+# CONFIG_PKG_USING_STEMWIN is not set
+# CONFIG_PKG_USING_WAVPLAYER is not set
+# CONFIG_PKG_USING_TJPGD is not set
+
+#
+# tools packages
+#
+# CONFIG_PKG_USING_CMBACKTRACE is not set
+# CONFIG_PKG_USING_EASYFLASH is not set
+# CONFIG_PKG_USING_EASYLOGGER is not set
+# CONFIG_PKG_USING_SYSTEMVIEW is not set
+# CONFIG_PKG_USING_RDB is not set
+# CONFIG_PKG_USING_QRCODE is not set
+# CONFIG_PKG_USING_ULOG_EASYFLASH is not set
+# CONFIG_PKG_USING_ADBD is not set
+# CONFIG_PKG_USING_COREMARK is not set
+# CONFIG_PKG_USING_DHRYSTONE is not set
+# CONFIG_PKG_USING_NR_MICRO_SHELL is not set
+# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set
+# CONFIG_PKG_USING_LUNAR_CALENDAR is not set
+# CONFIG_PKG_USING_BS8116A is not set
+
+#
+# system packages
+#
+# CONFIG_PKG_USING_GUIENGINE is not set
+# CONFIG_PKG_USING_PERSIMMON is not set
+# CONFIG_PKG_USING_CAIRO is not set
+# CONFIG_PKG_USING_PIXMAN is not set
+# CONFIG_PKG_USING_LWEXT4 is not set
+# CONFIG_PKG_USING_PARTITION is not set
+# CONFIG_PKG_USING_FAL is not set
+# CONFIG_PKG_USING_SQLITE is not set
+# CONFIG_PKG_USING_RTI is not set
+# CONFIG_PKG_USING_LITTLEVGL2RTT is not set
+# CONFIG_PKG_USING_CMSIS is not set
+# CONFIG_PKG_USING_DFS_YAFFS is not set
+# CONFIG_PKG_USING_LITTLEFS is not set
+# CONFIG_PKG_USING_THREAD_POOL is not set
+# CONFIG_PKG_USING_ROBOTS is not set
+# CONFIG_PKG_USING_EV is not set
+# CONFIG_PKG_USING_SYSWATCH is not set
+# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set
+# CONFIG_PKG_USING_PLCCORE is not set
+
+#
+# peripheral libraries and drivers
+#
+# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
+# CONFIG_PKG_USING_REALTEK_AMEBA is not set
+# CONFIG_PKG_USING_SHT2X is not set
+# CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_STM32_SDIO is not set
+# CONFIG_PKG_USING_ICM20608 is not set
+# CONFIG_PKG_USING_U8G2 is not set
+# CONFIG_PKG_USING_BUTTON is not set
+# CONFIG_PKG_USING_PCF8574 is not set
+# CONFIG_PKG_USING_SX12XX is not set
+# CONFIG_PKG_USING_SIGNAL_LED is not set
+# CONFIG_PKG_USING_LEDBLINK is not set
+# CONFIG_PKG_USING_LITTLED is not set
+# CONFIG_PKG_USING_LKDGUI is not set
+# CONFIG_PKG_USING_WM_LIBRARIES is not set
+# CONFIG_PKG_USING_KENDRYTE_SDK is not set
+# CONFIG_PKG_USING_INFRARED is not set
+# CONFIG_PKG_USING_ROSSERIAL is not set
+# CONFIG_PKG_USING_AGILE_BUTTON is not set
+# CONFIG_PKG_USING_AGILE_LED is not set
+# CONFIG_PKG_USING_AT24CXX is not set
+# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
+# CONFIG_PKG_USING_AD7746 is not set
+# CONFIG_PKG_USING_PCA9685 is not set
+# CONFIG_PKG_USING_I2C_TOOLS is not set
+# CONFIG_PKG_USING_NRF24L01 is not set
+# CONFIG_PKG_USING_TOUCH_DRIVERS is not set
+# CONFIG_PKG_USING_MAX17048 is not set
+# CONFIG_PKG_USING_RPLIDAR is not set
+# CONFIG_PKG_USING_AS608 is not set
+# CONFIG_PKG_USING_RC522 is not set
+# CONFIG_PKG_USING_EMBARC_BSP is not set
+# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set
+# CONFIG_PKG_USING_MAX7219 is not set
+# CONFIG_PKG_USING_BEEP is not set
+# CONFIG_PKG_USING_EASYBLINK is not set
+
+#
+# miscellaneous packages
+#
+# CONFIG_PKG_USING_LIBCSV is not set
+# CONFIG_PKG_USING_OPTPARSE is not set
+# CONFIG_PKG_USING_FASTLZ is not set
+# CONFIG_PKG_USING_MINILZO is not set
+# CONFIG_PKG_USING_QUICKLZ is not set
+# CONFIG_PKG_USING_MULTIBUTTON is not set
+# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set
+# CONFIG_PKG_USING_CANFESTIVAL is not set
+# CONFIG_PKG_USING_ZLIB is not set
+# CONFIG_PKG_USING_DSTR is not set
+# CONFIG_PKG_USING_TINYFRAME is not set
+# CONFIG_PKG_USING_KENDRYTE_DEMO is not set
+# CONFIG_PKG_USING_DIGITALCTRL is not set
+# CONFIG_PKG_USING_UPACKER is not set
+# CONFIG_PKG_USING_UPARAM is not set
+
+#
+# samples: kernel and components samples
+#
+# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
+# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
+# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
+# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
+# CONFIG_PKG_USING_HELLO is not set
+# CONFIG_PKG_USING_VI is not set
+# CONFIG_PKG_USING_NNOM is not set
+# CONFIG_PKG_USING_LIBANN is not set
+# CONFIG_PKG_USING_ELAPACK is not set
+# CONFIG_PKG_USING_ARMv7M_DWT is not set
+# CONFIG_PKG_USING_VT100 is not set
+# CONFIG_PKG_USING_ULAPACK is not set
+# CONFIG_PKG_USING_UKAL is not set
+CONFIG_SOC_FAMILY_AT32=y
+CONFIG_SOC_SERIES_AT32F407=y
+
+#
+# Hardware Drivers Config
+#
+CONFIG_SOC_AT32F407VGT7=y
+
+#
+# Onboard Peripheral Drivers
+#
+CONFIG_BSP_USING_SERIAL=y
+
+#
+# On-chip Peripheral Drivers
+#
+CONFIG_BSP_USING_GPIO=y
+# CONFIG_BSP_USING_ETH is not set
+# CONFIG_BSP_USING_RTC is not set
+# CONFIG_BSP_RTC_USING_LSE is not set
+# CONFIG_BSP_RTC_USING_LSI is not set
+CONFIG_BSP_USING_UART=y
+CONFIG_BSP_USING_UART1=y
+CONFIG_BSP_USING_UART2=y
+CONFIG_BSP_USING_UART3=y
+# CONFIG_BSP_USING_PWM is not set
+# CONFIG_BSP_USING_HWTIMER is not set
+# CONFIG_BSP_USING_SPI is not set
+# CONFIG_BSP_USING_I2C1 is not set
+# CONFIG_BSP_USING_ADC is not set
+# CONFIG_BSP_USING_SDIO is not set

bsp/at32/at32f407-start/JLinkSettings.ini

+[BREAKPOINTS]
+ForceImpTypeAny = 0
+ShowInfoWin = 1
+EnableFlashBP = 2
+BPDuringExecution = 0
+[CFI]
+CFISize = 0x00
+CFIAddr = 0x00
+[CPU]
+MonModeVTableAddr = 0xFFFFFFFF
+MonModeDebug = 0
+MaxNumAPs = 0
+LowPowerHandlingMode = 0
+OverrideMemMap = 0
+AllowSimulation = 1
+ScriptFile=""
+[FLASH]
+CacheExcludeSize = 0x00
+CacheExcludeAddr = 0x00
+MinNumBytesFlashDL = 0
+SkipProgOnCRCMatch = 1
+VerifyDownload = 1
+AllowCaching = 1
+EnableFlashDL = 2
+Override = 1
+Device="Cortex-M4"
+[GENERAL]
+WorkRAMSize = 0x00
+WorkRAMAddr = 0x00
+RAMUsageLimit = 0x00
+[SWO]
+SWOLogFile=""
+[MEM]
+RdOverrideOrMask = 0x00
+RdOverrideAndMask = 0xFFFFFFFF
+RdOverrideAddr = 0xFFFFFFFF
+WrOverrideOrMask = 0x00
+WrOverrideAndMask = 0xFFFFFFFF
+WrOverrideAddr = 0xFFFFFFFF

bsp/at32/at32f407-start/Kconfig

+mainmenu "RT-Thread Configuration"
+
+config BSP_DIR
+    string
+    option env="BSP_ROOT"
+    default "."
+
+config RTT_DIR
+    string
+    option env="RTT_ROOT"
+    default "../../.."
+
+config PKGS_DIR
+    string
+    option env="PKGS_ROOT"
+    default "packages"
+
+source "$RTT_DIR/Kconfig"
+source "$PKGS_DIR/Kconfig"
+source "../libraries/Kconfig"
+source "board/Kconfig"
+

bsp/at32/at32f407-start/README.md

+# AT32F407 AT-START 开发板 BSP 说明
+
+## 简介
+
+AT32F407 AT-START是雅特力推出的一款AT32F407系列的评估板，其搭载的MCU主要资源参数如下：
+
+| 硬件      | 描述          |
+| --------- | ------------- |
+| 芯片型号  | AT32F407VGT7  |
+| CPU       | ARM Cortex M4 |
+| 主频      | 240M          |
+| 片内SRAM  | 96K可扩展224K |
+| 片内FLASH | 1024K         |
+
+## 编译说明
+
+AT32F407-START板级包支持MDK4﹑MDK5﹑IAR开发环境和GCC编译器，以下是具体版本信息：
+
+| IDE/编译器 | 已测试版本                   |
+| ---------- | ---------------------------- |
+| MDK4       | MDK4.74                      |
+| MDK5       | MDK523                       |
+| IAR        | IAR8.20                      |
+| GCC        | GCC 5.4.1 20160919 (release) |
+
+## 板载资源
+
+- MCU：AT32F407VGT7，主频 240MHz，1024KB FLASH ，96KB可扩展到224KB RAM
+- 常用外设
+  - LED：3个，（红色PD13、白色PD14、绿色PD15）
+  - 按键：1个，KEY_USER（兼具唤醒功能，PA0)
+- 常用接口：插针串口J8
+- 调试接口，JLINK、板载的 AT-LINK SWD 下载
+
+## 外设支持
+
+本 BSP 目前对外设驱动的支持情况如下：
+
+| 驱动      | 支持情况 |            备注            |
+| --------- | -------- | :------------------------: |
+| UART      | 支持     | USART1/2/3                 |
+| GPIO      | 支持     | PA0...PF7                  |
+| IIC       | 支持     | GPIO模拟I2C                |
+| SPI       | 支持     | SPI1/2                     |
+| ADC       | 支持     | ADC1/2                     |
+| PWM       | 支持     | TMR1/2                     |
+| HWTIMER   | 支持     | TMR3/4/5                   |
+| SDIO      | 支持     | SDIO1                      |
+| WDT       | 支持     |                            |
+| RTC       | 支持     |                            |
+| ETH       | 支持     |                            |
+
+### IO在板级支持包中的映射情况
+
+| IO号 | 板级包中的定义 |
+| ---- | -------------- |
+| PD13 | LED2           |
+| PD14 | LED3           |
+| PD15 | LED4           |
+| PA9  | USART1_TX      |
+| PA10 | USART1_RX      |
+| PA2  | USART2_TX      |
+| PA3  | USART2_RX      |
+| PB10 | USART3_TX      |
+| PB11 | USART3_RX      |
+| PA4  | SPI1_NSS       |
+| PA5  | SPI1_SCK       |
+| PA6  | SPI1_MISO      |
+| PA7  | SPI1_MOSI      |
+| PB12 | SPI2_NSS       |
+| PB13 | SPI2_SCK       |
+| PB14 | SPI2_MISO      |
+| PB15 | SPI2_MOSI      |
+| PB6  | I2C1_SCL       |
+| PB7  | I2C1_SDA       |
+| PC8  | SDIO1_D0       |
+| PC9  | SDIO1_D1       |
+| PC10 | SDIO1_D2       |
+| PC11 | SDIO1_D3       |
+| PC12 | SDIO1_CK       |
+| PD2  | SDIO1_CMD      |
+| PA8  | PWM_TMR1_CH1   |
+| PA11 | PWM_TMR1_CH4   |
+| PA0  | PWM_TMR2_CH1   |
+| PA1  | PWM_TMR2_CH2   |
+| PC0  | ADC1/2_IN10    |
+| PC1  | ADC1/2_IN11    |
+| PC2  | ADC1/2_IN12    |
+| PC3  | ADC1/2_IN13    |
+| PC4  | ADC1/2_IN14    |
+| PC5  | ADC1/2_IN15    |
+| PB11 | ETH_RMII_TX_EN |
+| PB12 | ETH_RMII_TX0   |
+| PB13 | ETH_RMII_TX1   |
+| PD8  | ETH_RMII_RX_DV |
+| PD9  | ETH_RMII_RXD0  |
+| PD10 | ETH_RMII_RXD1  |
+| PA1  | ETH_RMII_REF_CLK |
+
+## 使用说明
+
+    本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。
+
+### 快速上手
+
+本 BSP 为开发者提供 MDK4、MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。
+
+#### 硬件连接
+
+使用数据线连接开发板到 PC，打开电源开关。
+
+#### 编译下载
+
+双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。
+
+> 工程默认配置使用 JLink 下载程序，在通过 JLink 连接开发板的基础上，点击下载按钮即可下载程序到开发板
+
+#### 运行结果
+
+下载程序成功之后，系统会自动运行，观察开发板上 LED 的运行效果，LED2/3/4 会周期性闪烁。
+
+连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，在串口上可以看到 RT-Thread 的输出信息:
+
+```bash
+ \ | /
+- RT -     Thread Operating System
+ / | \     4.0.3 build Mar  9 2020
+ 2006 - 2020 Copyright by rt-thread team
+msh />
+```
+
+## 注意事项
+
+AT32F407使用Ethernet且PHY时钟由MCO输出提供时，主频最好采用200Mhz。
+
+可在雅特力官方网站进行所需资料下载，如Keil_v5/Keil_v4/IAR等pack安装包和AT-START开发板原理图等（www.arterytek.com）
+
+## 联系人信息
+
+维护人:
+
+- [sheltonyu](https://github.com/sheltonyu) 
\ No newline at end of file

bsp/at32/at32f407-start/SConscript

+# for module compiling
+import os
+Import('RTT_ROOT')
+from building import *
+
+cwd = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+    path = os.path.join(cwd, d)
+    if os.path.isfile(os.path.join(path, 'SConscript')):
+        objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')

bsp/at32/at32f407-start/SConstruct

+import os
+import sys
+import rtconfig
+
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+    RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..')
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+try:
+    from building import *
+except:
+    print('Cannot found RT-Thread root directory, please check RTT_ROOT')
+    print(RTT_ROOT)
+    exit(-1)
+
+TARGET = 'rtthread.' + rtconfig.TARGET_EXT
+
+DefaultEnvironment(tools=[])
+env = Environment(tools = ['mingw'],
+    AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+    CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
+    AR = rtconfig.AR, ARFLAGS = '-rc',
+    LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+if rtconfig.PLATFORM == 'iar':
+    env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
+    env.Replace(ARFLAGS = [''])
+    env.Replace(LINKCOM = env["LINKCOM"] + ' --map project.map')
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+SDK_ROOT = os.path.abspath('./')
+
+if os.path.exists(SDK_ROOT + '/Libraries'):
+    libraries_path_prefix = SDK_ROOT + '/Libraries'
+else:
+    libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/Libraries'
+
+SDK_LIB = libraries_path_prefix
+Export('SDK_LIB')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
+
+at32_library = 'AT32_Std_Driver'
+rtconfig.BSP_LIBRARY_TYPE = at32_library
+
+# include libraries
+objs.extend(SConscript(os.path.join(libraries_path_prefix, at32_library, 'SConscript')))
+
+# common include drivers
+objs.extend(SConscript(os.path.join(libraries_path_prefix, 'rt_drivers', 'SConscript')))
+
+# make a building
+DoBuilding(TARGET, objs)

bsp/at32/at32f407-start/applications/SConscript

+# RT-Thread building script for component
+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+
+cwd = GetCurrentDir()
+
+# add the general drivers.
+src = Split("""
+main.c
+""")
+
+CPPPATH = [cwd, str(Dir('#'))]
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')

bsp/at32/at32f407-start/applications/main.c

+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-01-08     shelton      first version
+ */
+
+#include <rtthread.h>
+#include <rtdevice.h>
+#include "board.h"
+#include "drv_gpio.h"
+
+/* defined the LED2 pin: PD13 */
+#define LED2_PIN    GET_PIN(D, 13)
+/* defined the LED3 pin: PD14 */
+#define LED3_PIN    GET_PIN(D, 14)
+/* defined the LED4 pin: PD15 */
+#define LED4_PIN    GET_PIN(D, 15)
+
+int main(void)
+{
+    uint32_t Speed = 200;
+    /* set LED2 pin mode to output */
+    rt_pin_mode(LED2_PIN, PIN_MODE_OUTPUT);
+    /* set LED3 pin mode to output */
+    rt_pin_mode(LED3_PIN, PIN_MODE_OUTPUT);
+    /* set LED4 pin mode to output */
+    rt_pin_mode(LED4_PIN, PIN_MODE_OUTPUT);
+
+    while (1)
+    {
+        rt_pin_write(LED2_PIN, PIN_LOW);
+        rt_thread_mdelay(Speed);
+        rt_pin_write(LED3_PIN, PIN_LOW);
+        rt_thread_mdelay(Speed);
+        rt_pin_write(LED4_PIN, PIN_LOW);
+        rt_thread_mdelay(Speed);
+        rt_pin_write(LED2_PIN, PIN_HIGH);
+        rt_thread_mdelay(Speed);
+        rt_pin_write(LED3_PIN, PIN_HIGH);
+        rt_thread_mdelay(Speed);
+        rt_pin_write(LED4_PIN, PIN_HIGH);
+        rt_thread_mdelay(Speed);
+    }
+}

bsp/at32/at32f407-start/board/Kconfig

+menu "Hardware Drivers Config"
+
+config SOC_AT32F407VGT7
+    bool
+    select SOC_SERIES_AT32F407
+    select RT_USING_COMPONENTS_INIT
+    select RT_USING_USER_MAIN
+    default y
+
+menu "Onboard Peripheral Drivers"
+
+    config BSP_USING_SERIAL
+        bool "Enable USART (uart1)"
+        select BSP_USING_UART
+        select BSP_USING_UART1
+        default y
+
+endmenu
+
+menu "On-chip Peripheral Drivers"
+
+    config BSP_USING_GPIO
+        bool "Enable GPIO"
+        select RT_USING_PIN
+        default y
+
+    config BSP_USING_ETH
+        bool "Enable Ethernet"
+        default n
+        select RT_USING_LWIP
+        select PHY_USING_LAN8720A
+
+    menuconfig BSP_USING_RTC
+        bool "Enable RTC"
+        select RT_USING_RTC
+        select RT_USING_LIBC
+        default n
+        if BSP_USING_RTC
+            choice
+                prompt "Select clock source"
+                default BSP_RTC_USING_LSE
+
+                config BSP_RTC_USING_LSE
+                    bool "RTC USING LSE"
+
+                config BSP_RTC_USING_LSI
+                    bool "RTC USING LSI"
+            endchoice
+        endif
+
+    menuconfig BSP_USING_UART
+        bool "Enable UART"
+        default y
+        select RT_USING_SERIAL
+        if BSP_USING_UART
+            config BSP_USING_UART1
+                bool "Enable UART1"
+                default y
+
+            config BSP_USING_UART2
+                bool "Enable UART2"
+                default n
+
+            config BSP_USING_UART3
+                bool "Enable UART3"
+                default n
+        endif
+
+    menuconfig BSP_USING_PWM
+        bool "Enable PWM"
+        default n
+        select RT_USING_PWM
+        if BSP_USING_PWM
+        menuconfig BSP_USING_TMR1
+            bool "Enable timer1 output PWM"
+            default n
+            if BSP_USING_TMR1
+                config BSP_USING_TMR1_CH1
+                    bool "Enable TMR1 channel1 PWM"
+                    default n
+
+                config BSP_USING_TMR1_CH4
+                    bool "Enable TMR1 channel4 PWM"
+                    default n
+            endif
+        menuconfig BSP_USING_TMR2
+            bool "Enable timer2 output PWM"
+            default n
+            if BSP_USING_TMR2
+                config BSP_USING_TMR2_CH1
+                    bool "Enable TMR2 channel1 PWM"
+                    default n
+
+                config BSP_USING_TMR2_CH2
+                    bool "Enable TMR2 channel2 PWM"
+                    default n
+            endif
+        endif
+
+    menuconfig BSP_USING_HWTIMER
+        bool "Enable HWTIMER"
+        default n
+        select RT_USING_HWTIMER
+        if BSP_USING_HWTIMER
+        config BSP_USING_HWTMR3
+            bool "Enable hardware timer3"
+            default n
+        config BSP_USING_HWTMR4
+            bool "Enable hardware timer4"
+            default n
+        config BSP_USING_HWTMR5
+            bool "Enable hardware timer5"
+            default n
+        endif
+
+    menuconfig BSP_USING_SPI
+        bool "Enable SPI BUS"
+        default n
+        select RT_USING_SPI
+        if BSP_USING_SPI
+            config BSP_USING_SPI1
+                bool "Enable SPI1 BUS"
+                default n
+
+            config BSP_USING_SPI2
+                bool "Enable SPI2 BUS"
+                default n
+        endif
+
+    menuconfig BSP_USING_I2C1
+        bool "Enable I2C1 BUS (software simulation)"
+        default n
+        select RT_USING_I2C
+        select RT_USING_I2C_BITOPS
+        select RT_USING_PIN
+        if BSP_USING_I2C1
+            config BSP_I2C1_SCL_PIN
+                int "i2c1 scl pin number"
+                range 0 63
+                default 22
+            config BSP_I2C1_SDA_PIN
+                int "I2C1 sda pin number"
+                range 0 63
+                default 23
+        endif
+
+    menuconfig BSP_USING_ADC
+        bool "Enable ADC"
+        default n
+        select RT_USING_ADC
+        if BSP_USING_ADC
+            config BSP_USING_ADC1
+                bool "Enable ADC1"
+                default n
+            config BSP_USING_ADC2
+                bool "Enable ADC2"
+                default n
+        endif
+
+    menuconfig BSP_USING_SDIO
+        bool "Enable SDIO"
+        default n
+        select RT_USING_SDIO
+        if BSP_USING_SDIO
+            config BSP_USING_SDIO1
+                bool "Enable SDIO1"
+                default n
+        endif
+endmenu
+
+endmenu

bsp/at32/at32f407-start/board/SConscript

+import os
+import rtconfig
+from building import *
+
+Import('SDK_LIB')
+
+cwd = GetCurrentDir()
+
+# add general drivers
+src = Split('''
+board.c
+msp/at32_msp.c
+msp/system_at32f4xx.c
+''')
+
+path = [cwd]
+path += [cwd + '/msp']
+
+startup_path_prefix = SDK_LIB
+
+if rtconfig.CROSS_TOOL == 'gcc':
+    src += [startup_path_prefix + '/AT32_Std_Driver/CMSIS/AT32/AT32F4xx/src/gcc/startup_at32f407vgt7.s']
+elif rtconfig.CROSS_TOOL == 'keil':
+    src += [startup_path_prefix + '/AT32_Std_Driver/CMSIS/AT32/AT32F4xx/src/mdk/startup_at32f407vgt7.s']
+elif rtconfig.CROSS_TOOL == 'iar':
+    src += [startup_path_prefix + '/AT32_Std_Driver/CMSIS/AT32/AT32F4xx/src/iar/startup_at32f407vgt7.s']
+    
+CPPDEFINES = ['AT32F407VGT7']
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
+Return('group')

bsp/at32/at32f407-start/board/board.c

+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2018-11-06     balanceTWK   first version
+ */
+ 
+#include <stdint.h>
+#include <rthw.h>
+#include <rtthread.h>
+
+#include <at32f4xx.h>
+#include <board.h>
+
+#ifdef BSP_USING_SRAM
+#include "drv_sram.h"
+#endif
+/**
+  * @brief  This function is executed in case of error occurrence.
+  * @param  None
+  * @retval None
+  */
+void Error_Handler(void)
+{
+    /* USER CODE BEGIN Error_Handler */
+    /* User can add his own implementation to report the HAL error return state */
+    while (1)
+    {
+    }
+    /* USER CODE END Error_Handler */
+}
+
+/** System Clock Configuration
+*/
+void SystemClock_Config(void)
+{
+    SysTick_Config(SystemCoreClock / RT_TICK_PER_SECOND);
+    NVIC_SetPriority(SysTick_IRQn, 0);
+}
+
+/**
+ * This is the timer interrupt service routine.
+ *
+ */
+void SysTick_Handler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    rt_tick_increase();
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+/**
+ * This function will initial AT32 board.
+ */
+void rt_hw_board_init()
+{
+    /* NVIC Configuration */
+#define NVIC_VTOR_MASK              0x3FFFFF80
+#ifdef  VECT_TAB_RAM
+    /* Set the Vector Table base location at 0x10000000 */
+    SCB->VTOR  = (0x10000000 & NVIC_VTOR_MASK);
+#else  /* VECT_TAB_FLASH  */
+    /* Set the Vector Table base location at 0x08000000 */
+    SCB->VTOR  = (0x08000000 & NVIC_VTOR_MASK);
+#endif
+
+    SystemClock_Config();
+
+#ifdef RT_USING_COMPONENTS_INIT
+    rt_components_board_init();
+#endif
+
+#ifdef RT_USING_CONSOLE
+    rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
+#endif
+
+#ifdef BSP_USING_SRAM
+    rt_system_heap_init((void *)EXT_SRAM_BEGIN, (void *)EXT_SRAM_END);
+#else
+    rt_system_heap_init((void *)HEAP_BEGIN, (void *)HEAP_END);
+#endif
+}

bsp/at32/at32f407-start/board/board.h

+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2020-01-15     shelton      first version
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+#include <at32f4xx.h>
+#include "at32_msp.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Internal SRAM memory size[Kbytes] <96>, Default: 96*/
+#define AT32_SRAM_SIZE      96
+#define AT32_SRAM_END       (0x20000000 + AT32_SRAM_SIZE * 1024)
+
+#if defined(__CC_ARM) || defined(__CLANG_ARM)
+extern int Image$$RW_IRAM1$$ZI$$Limit;
+#define HEAP_BEGIN      ((void *)&Image$$RW_IRAM1$$ZI$$Limit)
+#elif __ICCARM__
+#pragma section="CSTACK"
+#define HEAP_BEGIN      (__segment_end("CSTACK"))
+#else
+extern int __bss_end;
+#define HEAP_BEGIN      ((void *)&__bss_end)
+#endif
+
+#define HEAP_END        AT32_SRAM_END
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __BOARD_H__ */

bsp/at32/at32f407-start/board/linker_scripts/link.icf

+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__   = 0x080FFFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__   = 0x20017FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x0400;
+define symbol __ICFEDIT_size_heap__   = 0x0000;
+/**** End of ICF editor section. ###ICF###*/
+
+define memory mem with size = 4G;
+define region ROM_region      = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region      = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+
+place in ROM_region   { readonly };
+place in RAM_region   { readwrite, last block CSTACK};
\ No newline at end of file

bsp/at32/at32f407-start/board/linker_scripts/link.lds

+/*
+ * linker script for AT32 with GNU ld
+ */
+
+/* Program Entry, set to mark it as "used" and avoid gc */
+MEMORY
+{
+    ROM (rx) : ORIGIN = 0x08000000, LENGTH = 1024k /* 1024KB flash */
+    RAM (rw) : ORIGIN = 0x20000000, LENGTH =  96k /* 96K sram */
+}
+ENTRY(Reset_Handler)
+_system_stack_size = 0x200;
+
+SECTIONS
+{
+    .text :
+    {
+        . = ALIGN(4);
+        _stext = .;
+        KEEP(*(.isr_vector))            /* Startup code */
+
+        . = ALIGN(4);
+        *(.text)                        /* remaining code */
+        *(.text.*)                      /* remaining code */
+        *(.rodata)                      /* read-only data (constants) */
+        *(.rodata*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.gnu.linkonce.t*)
+
+        /* section information for finsh shell */
+        . = ALIGN(4);
+        __fsymtab_start = .;
+        KEEP(*(FSymTab))
+        __fsymtab_end = .;
+
+        . = ALIGN(4);
+        __vsymtab_start = .;
+        KEEP(*(VSymTab))
+        __vsymtab_end = .;
+
+        /* section information for initial. */
+        . = ALIGN(4);
+        __rt_init_start = .;
+        KEEP(*(SORT(.rti_fn*)))
+        __rt_init_end = .;
+
+        . = ALIGN(4);
+
+        PROVIDE(__ctors_start__ = .);
+        KEEP (*(SORT(.init_array.*)))
+        KEEP (*(.init_array))
+        PROVIDE(__ctors_end__ = .);
+
+        . = ALIGN(4); 
+
+        _etext = .;
+    } > ROM = 0
+
+    /* .ARM.exidx is sorted, so has to go in its own output section.  */
+    __exidx_start = .;
+    .ARM.exidx :
+    {
+        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+
+        /* This is used by the startup in order to initialize the .data secion */
+        _sidata = .;
+    } > ROM
+    __exidx_end = .;
+
+    /* .data section which is used for initialized data */
+
+    .data : AT (_sidata)
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _sdata = . ;
+
+        *(.data)
+        *(.data.*)
+        *(.gnu.linkonce.d*)
+
+        PROVIDE(__dtors_start__ = .);
+        KEEP(*(SORT(.dtors.*)))
+        KEEP(*(.dtors))
+        PROVIDE(__dtors_end__ = .);
+        
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .data secion */
+        _edata = . ;
+    } >RAM
+
+    .stack : 
+    {
+        . = ALIGN(4);
+        _sstack = .;
+        . = . + _system_stack_size;
+        . = ALIGN(4);
+        _estack = .;
+    } >RAM
+
+    __bss_start = .;
+    .bss :
+    {
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _sbss = .;
+
+        *(.bss)
+        *(.bss.*)
+        *(COMMON)
+
+        . = ALIGN(4);
+        /* This is used by the startup in order to initialize the .bss secion */
+        _ebss = . ;
+        
+        *(.bss.init)
+    } > RAM
+    __bss_end = .;
+
+    _end = .;
+
+    /* Stabs debugging sections.  */
+    .stab          0 : { *(.stab) }
+    .stabstr       0 : { *(.stabstr) }
+    .stab.excl     0 : { *(.stab.excl) }
+    .stab.exclstr  0 : { *(.stab.exclstr) }
+    .stab.index    0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment       0 : { *(.comment) }
+    /* DWARF debug sections.
+     * Symbols in the DWARF debugging sections are relative to the beginning
+     * of the section so we begin them at 0.  */
+    /* DWARF 1 */
+    .debug          0 : { *(.debug) }
+    .line           0 : { *(.line) }
+    /* GNU DWARF 1 extensions */
+    .debug_srcinfo  0 : { *(.debug_srcinfo) }
+    .debug_sfnames  0 : { *(.debug_sfnames) }
+    /* DWARF 1.1 and DWARF 2 */
+    .debug_aranges  0 : { *(.debug_aranges) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    /* DWARF 2 */
+    .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+    .debug_abbrev   0 : { *(.debug_abbrev) }
+    .debug_line     0 : { *(.debug_line) }
+    .debug_frame    0 : { *(.debug_frame) }
+    .debug_str      0 : { *(.debug_str) }
+    .debug_loc      0 : { *(.debug_loc) }
+    .debug_macinfo  0 : { *(.debug_macinfo) }
+    /* SGI/MIPS DWARF 2 extensions */
+    .debug_weaknames 0 : { *(.debug_weaknames) }
+    .debug_funcnames 0 : { *(.debug_funcnames) }
+    .debug_typenames 0 : { *(.debug_typenames) }
+    .debug_varnames  0 : { *(.debug_varnames) }
+}

bsp/at32/at32f407-start/board/linker_scripts/link.sct

+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x08000000 0x00100000  {    ; load region size_region
+  ER_IROM1 0x08000000 0x00100000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+  }
+  RW_IRAM1 0x20000000 0x00018000  {  ; RW data
+   .ANY (+RW +ZI)
+  }
+}
+

bsp/at32/at32f407-start/board/msp/at32_msp.c

+/**
+  ******************************************************************************
+  * @file    at32_msp.c
+  * @author  Artery Technology
+  * @version V1.0.0
+  * @date    2020-01-10
+  * @brief   Msp source file
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, ARTERYTEK SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2018 ArteryTek</center></h2>
+  ******************************************************************************
+  */
+
+#include <at32f4xx.h>
+#include <rtthread.h>
+#include "at32_msp.h"
+
+#ifdef BSP_USING_UART
+void at32_msp_usart_init(void *Instance)
+{
+    GPIO_InitType GPIO_InitStruct;
+    USART_Type *USARTx = (USART_Type *)Instance;
+
+    GPIO_StructInit(&GPIO_InitStruct);
+    GPIO_InitStruct.GPIO_MaxSpeed = GPIO_MaxSpeed_50MHz;
+#ifdef BSP_USING_UART1
+    if(USART1 == USARTx)
+    {
+        RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_USART1, ENABLE);
+        RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_GPIOA, ENABLE);
+        GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP;
+        GPIO_InitStruct.GPIO_Pins = GPIO_Pins_9;
+        GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+        GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+        GPIO_InitStruct.GPIO_Pins = GPIO_Pins_10;
+        GPIO_Init(GPIOA, &GPIO_InitStruct);
+    }
+#endif
+#ifdef BSP_USING_UART2
+    if(USART2 == USARTx)
+    {
+        RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_USART2, ENABLE);
+        RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_GPIOA, ENABLE);
+        GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP;
+        GPIO_InitStruct.GPIO_Pins = GPIO_Pins_2;
+        GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+        GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+        GPIO_InitStruct.GPIO_Pins = GPIO_Pins_3;
+        GPIO_Init(GPIOA, &GPIO_InitStruct);
+    }
+#endif
+#ifdef BSP_USING_UART3
+    if(USART3 == USARTx)
+    {
+        RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_USART3, ENABLE);
+        RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_GPIOB, ENABLE);
+        GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP;
+        GPIO_InitStruct.GPIO_Pins = GPIO_Pins_10;
+        GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+        GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+        GPIO_InitStruct.GPIO_Pins = GPIO_Pins_11;
+        GPIO_Init(GPIOB, &GPIO_InitStruct);
+    }
+#endif
+    /* Add others */
+}
+#endif /* BSP_USING_SERIAL */
+
+#ifdef BSP_USING_SPI
+void at32_msp_spi_init(void *Instance)
+{
+    GPIO_InitType GPIO_InitStruct;
+    SPI_Type *SPIx = (SPI_Type *)Instance;
+
+    GPIO_StructInit(&GPIO_InitStruct);
+    GPIO_InitStruct.GPIO_MaxSpeed = GPIO_MaxSpeed_50MHz;
+#ifdef BSP_USING_SPI1
+    if(SPI1 == SPIx)
+    {
+        RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_SPI1, ENABLE);
+        RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_GPIOA, ENABLE);
+
+        GPIO_InitStruct.GPIO_Mode = GPIO_Mode_OUT_PP;
+        GPIO_InitStruct.GPIO_Pins = GPIO_Pins_4;
+        GPIO_Init(GPIOA, &GPIO_InitStruct);
+        GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP;
+        GPIO_InitStruct.GPIO_Pins = GPIO_Pins_5 | GPIO_Pins_7;
+        GPIO_Init(GPIOA, &GPIO_InitStruct);
+        GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+        GPIO_InitStruct.GPIO_Pins = GPIO_Pins_6;
+        GPIO_Init(GPIOA, &GPIO_InitStruct);
+    }
+#endif
+#ifdef BSP_USING_SPI2
+    if(SPI2 == SPIx)
+    {
+        RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_SPI2, ENABLE);
+        RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_GPIOB, ENABLE);
+
+        GPIO_InitStruct.GPIO_Mode = GPIO_Mode_OUT_PP;
+        GPIO_InitStruct.GPIO_Pins = GPIO_Pins_12;
+        GPIO_Init(GPIOB, &GPIO_InitStruct);
+        GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP;
+        GPIO_InitStruct.GPIO_Pins = GPIO_Pins_13 | GPIO_Pins_15;
+        GPIO_Init(GPIOB, &GPIO_InitStruct);
+        GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+        GPIO_InitStruct.GPIO_Pins = GPIO_Pins_14;
+        GPIO_Init(GPIOB, &GPIO_InitStruct);
+    }
+#endif
+    /* Add others */
+}
+#endif /* BSP_USING_SPI */
+
+#ifdef BSP_USING_SDIO
+void at32_msp_sdio_init(void *Instance)
+{
+    GPIO_InitType GPIO_InitStructure;
+    SDIO_Type *SDIOx = (SDIO_Type *)Instance;
+
+    GPIO_StructInit(&GPIO_InitStructure);
+    GPIO_InitStructure.GPIO_MaxSpeed = GPIO_MaxSpeed_50MHz;
+
+    if(SDIO1 == SDIOx)
+    {
+        /* if used dma ... */
+        RCC_AHBPeriphClockCmd(RCC_AHBPERIPH_DMA2, ENABLE);
+
+        RCC_AHBPeriphClockCmd(RCC_AHBPERIPH_SDIO1, ENABLE);
+        RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_GPIOC | RCC_APB2PERIPH_GPIOD, ENABLE);
+        GPIO_InitStructure.GPIO_Pins = GPIO_Pins_8 | GPIO_Pins_9 | GPIO_Pins_10 | GPIO_Pins_11 | GPIO_Pins_12;
+        GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+        GPIO_Init(GPIOC, &GPIO_InitStructure);
+
+        GPIO_InitStructure.GPIO_Pins = GPIO_Pins_2;
+        GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+        GPIO_Init(GPIOD, &GPIO_InitStructure);
+    }
+}
+#endif /* BSP_USING_SDIO */
+
+#ifdef BSP_USING_PWM
+void at32_msp_tmr_init(void *Instance)
+{
+    GPIO_InitType GPIO_InitStructure;
+    TMR_Type *TMRx = (TMR_Type *)Instance;
+
+    if(TMRx == TMR1)
+    {
+        /* TMR1 clock enable */
+        RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_TMR1, ENABLE);
+        /* GPIOA clock enable */
+        RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_GPIOA, ENABLE);
+
+        /* GPIOA Configuration:TMR1 Channel1 and Channel4 as alternate function push-pull */
+        GPIO_InitStructure.GPIO_Pins = GPIO_Pins_8 | GPIO_Pins_11;
+        GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+        GPIO_InitStructure.GPIO_MaxSpeed = GPIO_MaxSpeed_50MHz;
+
+        GPIO_Init(GPIOA, &GPIO_InitStructure);
+    }
+
+    if(TMRx == TMR2)
+    {
+        /* TMR2 clock enable */
+        RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_TMR2, ENABLE);
+        /* GPIOA clock enable */
+        RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_GPIOA, ENABLE);
+
+        /* GPIOA Configuration:TMR2 Channel1 and Channel2 as alternate function push-pull */
+        GPIO_InitStructure.GPIO_Pins = GPIO_Pins_0 | GPIO_Pins_1;
+        GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+        GPIO_InitStructure.GPIO_MaxSpeed = GPIO_MaxSpeed_50MHz;
+
+        GPIO_Init(GPIOA, &GPIO_InitStructure);
+    }
+    /* Add others */
+}
+#endif /* BSP_USING_PWM */
+
+#ifdef BSP_USING_ADC
+void at32_msp_adc_init(void *Instance)
+{
+    GPIO_InitType GPIO_InitStruct;
+    ADC_Type *ADCx = (ADC_Type *)Instance;
+
+#ifdef BSP_USING_ADC1  
+    if(ADCx == ADC1)
+    {   
+        /* ADC1 & GPIO clock enable */
+        RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_ADC1 | RCC_APB2PERIPH_GPIOA | RCC_APB2PERIPH_GPIOB | RCC_APB2PERIPH_GPIOC,ENABLE);
+		
+        /* Configure ADC Channel as analog input */      
+        GPIO_StructInit(&GPIO_InitStruct);
+        GPIO_InitStruct.GPIO_Pins = GPIO_Pins_0 | GPIO_Pins_1 | GPIO_Pins_2 | GPIO_Pins_3 | GPIO_Pins_4 | GPIO_Pins_5;
+        GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_ANALOG;
+        GPIO_Init(GPIOC, &GPIO_InitStruct);
+        
+    }
+#endif
+
+#ifdef BSP_USING_ADC2  
+    if(ADCx == ADC2)
+    {
+        /* ADC2 & GPIO clock enable */
+        RCC_APB2PeriphClockCmd(RCC_APB2PERIPH_ADC2 | RCC_APB2PERIPH_GPIOA | RCC_APB2PERIPH_GPIOB | RCC_APB2PERIPH_GPIOC,ENABLE);
+      
+        /* Configure ADC Channel as analog input */      
+        GPIO_StructInit(&GPIO_InitStruct);
+        GPIO_InitStruct.GPIO_Pins = GPIO_Pins_0 | GPIO_Pins_1 | GPIO_Pins_2 | GPIO_Pins_3 | GPIO_Pins_4 | GPIO_Pins_5;
+        GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_ANALOG;
+        GPIO_Init(GPIOC, &GPIO_InitStruct);
+    }
+#endif     
+}
+#endif /* BSP_USING_ADC */
+
+#ifdef BSP_USING_HWTIMER
+void at32_msp_hwtmr_init(void *Instance)
+{
+    TMR_Type *TMRx = (TMR_Type *)Instance;
+
+#ifdef BSP_USING_HWTMR3
+    if(TMRx == TMR3)
+    {
+        /* TMR3 clock enable */
+        RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_TMR3, ENABLE);
+    }
+#endif 
+
+#ifdef BSP_USING_HWTMR4
+    if(TMRx == TMR4)
+    {
+        /* TMR4 clock enable */
+        RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_TMR4, ENABLE);
+    }
+#endif
+
+#ifdef BSP_USING_HWTMR5
+    if(TMRx == TMR5)
+    {
+        /* TMR5 clock enable */
+        RCC_APB1PeriphClockCmd(RCC_APB1PERIPH_TMR5, ENABLE);
+    }
+#endif
+}
+#endif

bsp/at32/at32f407-start/board/msp/at32_msp.h

+/**
+  ******************************************************************************
+  * @file    at32_msp.h
+  * @author  Artery Technology
+  * @version V1.0.0
+  * @date    2020-01-10
+  * @brief   Msp header file
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, ARTERYTEK SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2018 ArteryTek</center></h2>
+  ******************************************************************************
+  */
+
+#ifndef __AT32_MSP_H__
+#define __AT32_MSP_H__
+
+void at32_msp_usart_init(void *Instance);
+void at32_msp_spi_init(void *Instance);
+void at32_msp_tmr_init(void *Instance);
+void at32_msp_i2c_init(void *Instance);
+void at32_msp_sdio_init(void *Instance);
+void at32_msp_adc_init(void *Instance);
+void at32_msp_hwtmr_init(void *Instance);
+
+#endif /* __AT32_MSP_H__ */

bsp/at32/at32f407-start/project.eww

+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\project.ewp</path>
+  </project>
+  <batchBuild/>
+</workspace>
+
+

bsp/at32/at32f407-start/project.uvopt

+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>8000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>1</RunSim>
+        <RunTarget>0</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>0</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>0</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U4294967295 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0AT32F407_1024 -FS08000000 -FL0100000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7  -FN1 -FC800 -FD20000000 -FF0AT32F407_1024 -FL0100000 -FS08000000</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>1</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target>
+
+</ProjectOpt>

bsp/at32/at32f407-start/project.uvoptx

+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj; *.o</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>255</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0AT32F407_1024 -FL0100000 -FS08000000 -FP0($$Device:AT32F407VGT7$Flash\AT32F407_1024.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U4294967295 -O14 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight JTAG-DP") -D00(3BA00477) -L00(4) -N01("Unknown JTAG device") -D01(06414041) -L01(5) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO7 -FD20000000 -FC1000 -FN1 -FF0AT32F407_1024 -FS08000000 -FL0100000 -FP0($$Device:AT32F407VGT7$Flash\AT32F407_1024.FLM)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Source Group 1</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+  </Group>
+
+</ProjectOpt>

bsp/at32/at32f407-start/rtconfig.h

+#ifndef RT_CONFIG_H__
+#define RT_CONFIG_H__
+
+/* Automatically generated file; DO NOT EDIT. */
+/* RT-Thread Configuration */
+
+/* RT-Thread Kernel */
+
+#define RT_NAME_MAX 8
+#define RT_ALIGN_SIZE 4
+#define RT_THREAD_PRIORITY_32
+#define RT_THREAD_PRIORITY_MAX 32
+#define RT_TICK_PER_SECOND 1000
+#define RT_USING_OVERFLOW_CHECK
+#define RT_USING_HOOK
+#define RT_USING_IDLE_HOOK
+#define RT_IDLE_HOOK_LIST_SIZE 4
+#define IDLE_THREAD_STACK_SIZE 256
+#define RT_USING_TIMER_SOFT
+#define RT_TIMER_THREAD_PRIO 4
+#define RT_TIMER_THREAD_STACK_SIZE 512
+#define RT_DEBUG
+#define RT_DEBUG_COLOR
+
+/* Inter-Thread communication */
+
+#define RT_USING_SEMAPHORE
+#define RT_USING_MUTEX
+#define RT_USING_EVENT
+#define RT_USING_MAILBOX
+#define RT_USING_MESSAGEQUEUE
+
+/* Memory Management */
+
+#define RT_USING_MEMPOOL
+#define RT_USING_MEMHEAP
+#define RT_USING_SMALL_MEM
+#define RT_USING_HEAP
+
+/* Kernel Device Object */
+
+#define RT_USING_DEVICE
+#define RT_USING_CONSOLE
+#define RT_CONSOLEBUF_SIZE 128
+#define RT_CONSOLE_DEVICE_NAME "uart1"
+#define RT_VER_NUM 0x40003
+#define ARCH_ARM
+#define RT_USING_CPU_FFS
+#define ARCH_ARM_CORTEX_M
+#define ARCH_ARM_CORTEX_M4
+
+/* RT-Thread Components */
+
+#define RT_USING_COMPONENTS_INIT
+#define RT_USING_USER_MAIN
+#define RT_MAIN_THREAD_STACK_SIZE 2048
+#define RT_MAIN_THREAD_PRIORITY 10
+
+/* C++ features */
+
+
+/* Command shell */
+
+#define RT_USING_FINSH
+#define FINSH_THREAD_NAME "tshell"
+#define FINSH_USING_HISTORY
+#define FINSH_HISTORY_LINES 5
+#define FINSH_USING_SYMTAB
+#define FINSH_USING_DESCRIPTION
+#define FINSH_THREAD_PRIORITY 20
+#define FINSH_THREAD_STACK_SIZE 4096
+#define FINSH_CMD_SIZE 80
+#define FINSH_USING_MSH
+#define FINSH_USING_MSH_DEFAULT
+#define FINSH_USING_MSH_ONLY
+#define FINSH_ARG_MAX 10
+
+/* Device virtual file system */
+
+#define RT_USING_DFS
+#define DFS_USING_WORKDIR
+#define DFS_FILESYSTEMS_MAX 2
+#define DFS_FILESYSTEM_TYPES_MAX 2
+#define DFS_FD_MAX 16
+#define RT_USING_DFS_ELMFAT
+
+/* elm-chan's FatFs, Generic FAT Filesystem Module */
+
+#define RT_DFS_ELM_CODE_PAGE 437
+#define RT_DFS_ELM_WORD_ACCESS
+#define RT_DFS_ELM_USE_LFN_3
+#define RT_DFS_ELM_USE_LFN 3
+#define RT_DFS_ELM_MAX_LFN 255
+#define RT_DFS_ELM_DRIVES 2
+#define RT_DFS_ELM_MAX_SECTOR_SIZE 512
+#define RT_DFS_ELM_REENTRANT
+#define RT_USING_DFS_DEVFS
+
+/* Device Drivers */
+
+#define RT_USING_DEVICE_IPC
+#define RT_PIPE_BUFSZ 512
+#define RT_USING_SERIAL
+#define RT_SERIAL_RB_BUFSZ 64
+#define RT_USING_HWTIMER
+#define RT_USING_I2C
+#define RT_USING_I2C_BITOPS
+#define RT_USING_PIN
+#define RT_USING_ADC
+#define RT_USING_PWM
+#define RT_USING_RTC
+#define RT_USING_SDIO
+#define RT_SDIO_STACK_SIZE 512
+#define RT_SDIO_THREAD_PRIORITY 15
+#define RT_MMCSD_STACK_SIZE 1024
+#define RT_MMCSD_THREAD_PREORITY 22
+#define RT_MMCSD_MAX_PARTITION 16
+#define RT_USING_SPI
+
+/* Using USB */
+
+
+/* POSIX layer and C standard library */
+
+#define RT_USING_LIBC
+#define RT_USING_POSIX
+
+/* Network */
+
+/* Socket abstraction layer */
+
+
+/* Network interface device */
+
+
+/* light weight TCP/IP stack */
+
+
+/* AT commands */
+
+
+/* VBUS(Virtual Software BUS) */
+
+
+/* Utilities */
+
+
+/* RT-Thread online packages */
+
+/* IoT - internet of things */
+
+
+/* Wi-Fi */
+
+/* Marvell WiFi */
+
+
+/* Wiced WiFi */
+
+
+/* IoT Cloud */
+
+
+/* security packages */
+
+
+/* language packages */
+
+
+/* multimedia packages */
+
+
+/* tools packages */
+
+
+/* system packages */
+
+
+/* peripheral libraries and drivers */
+
+
+/* miscellaneous packages */
+
+
+/* samples: kernel and components samples */
+
+#define SOC_FAMILY_AT32
+#define SOC_SERIES_AT32F407
+
+/* Hardware Drivers Config */
+
+#define SOC_AT32F407VGT7
+
+/* Onboard Peripheral Drivers */
+
+#define BSP_USING_SERIAL
+
+/* On-chip Peripheral Drivers */
+
+#define BSP_USING_GPIO
+#define BSP_USING_UART
+#define BSP_USING_UART1
+#define BSP_USING_UART2
+#define BSP_USING_UART3
+
+#endif

bsp/at32/at32f407-start/rtconfig.py

+import os
+
+# toolchains options
+ARCH='arm'
+CPU='cortex-m4'
+CROSS_TOOL='gcc'
+
+# bsp lib config
+BSP_LIBRARY_TYPE = None
+
+if os.getenv('RTT_CC'):
+    CROSS_TOOL = os.getenv('RTT_CC')
+if os.getenv('RTT_ROOT'):
+    RTT_ROOT = os.getenv('RTT_ROOT')
+
+# cross_tool provides the cross compiler
+# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
+if  CROSS_TOOL == 'gcc':
+    PLATFORM    = 'gcc'
+    EXEC_PATH   = r'C:\Users\XXYYZZ'
+elif CROSS_TOOL == 'keil':
+    PLATFORM    = 'armcc'
+    EXEC_PATH   = r'C:/Keil_v5'
+elif CROSS_TOOL == 'iar':
+    PLATFORM    = 'iar'
+    EXEC_PATH   = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.0'
+
+if os.getenv('RTT_EXEC_PATH'):
+    EXEC_PATH = os.getenv('RTT_EXEC_PATH')
+
+BUILD = 'debug'
+
+if PLATFORM == 'gcc':
+    # toolchains
+    PREFIX = 'arm-none-eabi-'
+    CC = PREFIX + 'gcc'
+    AS = PREFIX + 'gcc'
+    AR = PREFIX + 'ar'
+    CXX = PREFIX + 'g++'
+    LINK = PREFIX + 'gcc'
+    TARGET_EXT = 'elf'
+    SIZE = PREFIX + 'size'
+    OBJDUMP = PREFIX + 'objdump'
+    OBJCPY = PREFIX + 'objcopy'
+
+    DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections'
+    CFLAGS = DEVICE + ' -Dgcc'
+    AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb '
+    LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds'
+
+    CPATH = ''
+    LPATH = ''
+
+    if BUILD == 'debug':
+        CFLAGS += ' -O0 -gdwarf-2 -g'
+        AFLAGS += ' -gdwarf-2'
+    else:
+        CFLAGS += ' -O2'
+
+    CXXFLAGS = CFLAGS 
+
+    POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
+
+elif PLATFORM == 'armcc':
+    # toolchains
+    CC = 'armcc'
+    CXX = 'armcc'
+    AS = 'armasm'
+    AR = 'armar'
+    LINK = 'armlink'
+    TARGET_EXT = 'axf'
+
+    DEVICE = ' --cpu Cortex-M4.fp '
+    CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99'
+    AFLAGS = DEVICE + ' --apcs=interwork '
+    LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict'
+    CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include'
+    LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib'
+
+    CFLAGS += ' -D__MICROLIB '
+    AFLAGS += ' --pd "__MICROLIB SETA 1" '
+    LFLAGS += ' --library_type=microlib '
+    EXEC_PATH += '/ARM/ARMCC/bin/'
+
+    if BUILD == 'debug':
+        CFLAGS += ' -g -O0'
+        AFLAGS += ' -g'
+    else:
+        CFLAGS += ' -O2'
+
+    CXXFLAGS = CFLAGS 
+    CFLAGS += ' -std=c99'
+
+    POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
+
+elif PLATFORM == 'iar':
+    # toolchains
+    CC = 'iccarm'
+    CXX = 'iccarm'
+    AS = 'iasmarm'
+    AR = 'iarchive'
+    LINK = 'ilinkarm'
+    TARGET_EXT = 'out'
+
+    DEVICE = '-Dewarm'
+
+    CFLAGS = DEVICE
+    CFLAGS += ' --diag_suppress Pa050'
+    CFLAGS += ' --no_cse'
+    CFLAGS += ' --no_unroll'
+    CFLAGS += ' --no_inline'
+    CFLAGS += ' --no_code_motion'
+    CFLAGS += ' --no_tbaa'
+    CFLAGS += ' --no_clustering'
+    CFLAGS += ' --no_scheduling'
+    CFLAGS += ' --endian=little'
+    CFLAGS += ' --cpu=Cortex-M4'
+    CFLAGS += ' -e'
+    CFLAGS += ' --fpu=VFPv4_sp'
+    CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"'
+    CFLAGS += ' --silent'
+
+    AFLAGS = DEVICE
+    AFLAGS += ' -s+'
+    AFLAGS += ' -w+'
+    AFLAGS += ' -r'
+    AFLAGS += ' --cpu Cortex-M4'
+    AFLAGS += ' --fpu VFPv4_sp'
+    AFLAGS += ' -S'
+
+    if BUILD == 'debug':
+        CFLAGS += ' --debug'
+        CFLAGS += ' -On'
+    else:
+        CFLAGS += ' -Oh'
+
+    LFLAGS = ' --config "board/linker_scripts/link.icf"'
+    LFLAGS += ' --entry __iar_program_start'
+    
+    CXXFLAGS = CFLAGS
+
+    EXEC_PATH = EXEC_PATH + '/arm/bin/'
+    POST_ACTION = 'ielftool --bin $TARGET rtthread.bin'

bsp/at32/at32f407-start/template.eww

+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\template.ewp</path>
+  </project>
+  <batchBuild/>
+</workspace>
+
+

bsp/at32/at32f407-start/template.uvopt

+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>8000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>1</RunSim>
+        <RunTarget>0</RunTarget>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>0</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>0</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>0</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <tPdscDbg>0</tPdscDbg>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U4294967295 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(1BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0AT32F407_1024 -FS08000000 -FL0100000</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7  -FN1 -FC800 -FD20000000 -FF0AT32F407_1024 -FL0100000 -FS08000000</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>1</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+    </TargetOption>
+  </Target>
+
+</ProjectOpt>

bsp/at32/at32f407-start/template.uvoptx

+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj; *.o</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>rt-thread</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>12000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\build\keil\List\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>255</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>6</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>Segger\JL2CM3.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 )  -FN1 -FC1000 -FD20000000 -FF0AT32F407_1024 -FL0100000 -FS08000000 -FP0($$Device:AT32F407VGT7$Flash\AT32F407_1024.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>JL2CM3</Key>
+          <Name>-U4294967295 -O14 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight JTAG-DP") -D00(3BA00477) -L00(4) -N01("Unknown JTAG device") -D01(06414041) -L01(5) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO7 -FD20000000 -FC1000 -FN1 -FF0AT32F407_1024 -FS08000000 -FL0100000 -FP0($$Device:AT32F407VGT7$Flash\AT32F407_1024.FLM)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>0</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Source Group 1</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+  </Group>
+
+</ProjectOpt>