Skip to content

R
rt-thread

2301_76519099 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 3
Star 1
Fork 1
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 bd55bf7d 编写于 作者: W wangqiang
浏览文件
操作

1. 删除了多余的文件 

2. 修改README.md中错误的描述
上级 f31aa182
隐藏空白更改
内联 并排
Showing with 3 addition and 2115 deletion
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/Driver/DriverTemplates/Driver_CAN.c 已删除 100644 → 0
浏览文件 @ f31aa182
/*
* Copyright (c) 2015-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Driver_CAN.h"
#define ARM_CAN_DRV_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(1,0) // CAN driver version
// Driver Version
static const ARM_DRIVER_VERSION can_driver_version = { ARM_CAN_API_VERSION, ARM_CAN_DRV_VERSION };
// Driver Capabilities
static const ARM_CAN_CAPABILITIES can_driver_capabilities = {
32U, // Number of CAN Objects available
1U, // Supports reentrant calls to ARM_CAN_MessageSend, ARM_CAN_MessageRead, ARM_CAN_ObjectConfigure and abort message sending used by ARM_CAN_Control.
0U, // Does not support CAN with Flexible Data-rate mode (CAN_FD)
0U, // Does not support restricted operation mode
1U, // Supports bus monitoring mode
1U, // Supports internal loopback mode
1U, // Supports external loopback mode
};
// Object Capabilities
static const ARM_CAN_OBJ_CAPABILITIES can_object_capabilities = {
1U, // Object supports transmission
1U, // Object supports reception
0U, // Object does not support RTR reception and automatic Data transmission
0U, // Object does not support RTR transmission and automatic Data reception
1U, // Object allows assignment of multiple filters to it
1U, // Object supports exact identifier filtering
0U, // Object does not support range identifier filtering
1U, // Object supports mask identifier filtering
3U // Object can buffer 3 messages
};
static uint8_t can_driver_powered = 0U;
static uint8_t can_driver_initialized = 0U;
static ARM_CAN_SignalUnitEvent_t CAN_SignalUnitEvent = NULL;
static ARM_CAN_SignalObjectEvent_t CAN_SignalObjectEvent = NULL;
//
// Functions
//
static ARM_DRIVER_VERSION CAN_GetVersion (void) {
// Return driver version
return can_driver_version;
}
static ARM_CAN_CAPABILITIES CAN_GetCapabilities (void) {
// Return driver capabilities
return can_driver_capabilities;
}
static int32_t CAN_Initialize (ARM_CAN_SignalUnitEvent_t cb_unit_event,
ARM_CAN_SignalObjectEvent_t cb_object_event) {
if (can_driver_initialized != 0U) { return ARM_DRIVER_OK; }
CAN_SignalUnitEvent = cb_unit_event;
CAN_SignalObjectEvent = cb_object_event;
// Add code for pin, memory, RTX objects initialization
// ..
can_driver_initialized = 1U;
return ARM_DRIVER_OK;
}
static int32_t CAN_Uninitialize (void) {
// Add code for pin, memory, RTX objects de-initialization
// ..
can_driver_initialized = 0U;
return ARM_DRIVER_OK;
}
static int32_t CAN_PowerControl (ARM_POWER_STATE state) {
switch (state) {
case ARM_POWER_OFF:
can_driver_powered = 0U;
// Add code to disable interrupts and put peripheral into reset mode,
// and if possible disable clock
// ..
case ARM_POWER_FULL:
if (can_driver_initialized == 0U) { return ARM_DRIVER_ERROR; }
if (can_driver_powered != 0U) { return ARM_DRIVER_OK; }
// Add code to enable clocks, reset variables enable interrupts
// and put peripheral into operational
// ..
can_driver_powered = 1U;
break;
default:
// Other states are not supported
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
return ARM_DRIVER_OK;
}
uint32_t CAN_GetClock (void) {
// Add code to return peripheral clock frequency
// ..
}
static int32_t CAN_SetBitrate (ARM_CAN_BITRATE_SELECT select, uint32_t bitrate, uint32_t bit_segments) {
if (can_driver_powered == 0U) { return ARM_DRIVER_ERROR; }
// Add code to setup peripheral parameters to generate specified bitrate
// with specified bit segments
// ..
return ARM_DRIVER_OK;
}
static int32_t CAN_SetMode (ARM_CAN_MODE mode) {
if (can_driver_powered == 0U) { return ARM_DRIVER_ERROR; }
switch (mode) {
case ARM_CAN_MODE_INITIALIZATION:
// Add code to put peripheral into initialization mode
// ..
break;
case ARM_CAN_MODE_NORMAL:
// Add code to put peripheral into normal operation mode
// ..
break;
case ARM_CAN_MODE_RESTRICTED:
// Add code to put peripheral into restricted operation mode
// ..
break;
case ARM_CAN_MODE_MONITOR:
// Add code to put peripheral into bus monitoring mode
// ..
break;
case ARM_CAN_MODE_LOOPBACK_INTERNAL:
// Add code to put peripheral into internal loopback mode
// ..
break;
case ARM_CAN_MODE_LOOPBACK_EXTERNAL:
// Add code to put peripheral into external loopback mode
// ..
break;
default:
// Handle unknown mode code
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
return ARM_DRIVER_OK;
}
ARM_CAN_OBJ_CAPABILITIES CAN_ObjectGetCapabilities (uint32_t obj_idx) {
// Return object capabilities
return can_object_capabilities;
}
static int32_t CAN_ObjectSetFilter (uint32_t obj_idx, ARM_CAN_FILTER_OPERATION operation, uint32_t id, uint32_t arg) {
if (can_driver_powered == 0U) { return ARM_DRIVER_ERROR; }
switch (operation) {
case ARM_CAN_FILTER_ID_EXACT_ADD:
// Add code to setup peripheral to receive messages with specified exact ID
break;
case ARM_CAN_FILTER_ID_MASKABLE_ADD:
// Add code to setup peripheral to receive messages with specified maskable ID
break;
case ARM_CAN_FILTER_ID_RANGE_ADD:
// Add code to setup peripheral to receive messages within specified range of IDs
break;
case ARM_CAN_FILTER_ID_EXACT_REMOVE:
// Add code to remove specified exact ID from being received by peripheral
break;
case ARM_CAN_FILTER_ID_MASKABLE_REMOVE:
// Add code to remove specified maskable ID from being received by peripheral
break;
case ARM_CAN_FILTER_ID_RANGE_REMOVE:
// Add code to remove specified range of IDs from being received by peripheral
break;
default:
// Handle unknown operation code
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
return ARM_DRIVER_OK;
}
static int32_t CAN_ObjectConfigure (uint32_t obj_idx, ARM_CAN_OBJ_CONFIG obj_cfg) {
if (can_driver_powered == 0U) { return ARM_DRIVER_ERROR; }
switch (obj_cfg) {
case ARM_CAN_OBJ_INACTIVE:
// Deactivate object
// ..
break;
case ARM_CAN_OBJ_RX_RTR_TX_DATA:
// Setup object to automatically return data when RTR with it's ID is received
// ..
break;
case ARM_CAN_OBJ_TX_RTR_RX_DATA:
// Setup object to send RTR and receive data response
// ..
break;
case ARM_CAN_OBJ_TX:
// Setup object to be used for sending messages
// ..
break;
case ARM_CAN_OBJ_RX:
// Setup object to be used for receiving messages
// ..
break;
default:
// Handle unknown object configuration code
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
return ARM_DRIVER_OK;
}
static int32_t CAN_MessageSend (uint32_t obj_idx, ARM_CAN_MSG_INFO *msg_info, const uint8_t *data, uint8_t size) {
if (can_driver_powered == 0U) { return ARM_DRIVER_ERROR; }
// Add code to send requested message
// ..
return ((int32_t)size);
}
static int32_t CAN_MessageRead (uint32_t obj_idx, ARM_CAN_MSG_INFO *msg_info, uint8_t *data, uint8_t size) {
if (can_driver_powered == 0U) { return ARM_DRIVER_ERROR; }
// Add code to read previously received message
// (reception was started when object was configured for reception)
// ..
return ((int32_t)size);
}
static int32_t CAN_Control (uint32_t control, uint32_t arg) {
if (can_driver_powered == 0U) { return ARM_DRIVER_ERROR; }
switch (control & ARM_CAN_CONTROL_Msk) {
case ARM_CAN_ABORT_MESSAGE_SEND:
// Add code to abort message pending to be sent
// ..
break;
case ARM_CAN_SET_FD_MODE:
// Add code to enable Flexible Data-rate mode
// ..
break;
case ARM_CAN_SET_TRANSCEIVER_DELAY:
// Add code to set transceiver delay
// ..
break;
default:
// Handle unknown control code
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
return ARM_DRIVER_OK;
}
static ARM_CAN_STATUS CAN_GetStatus (void) {
// Add code to return device bus and error status
// ..
}
// IRQ handlers
// Add interrupt routines to handle transmission, reception, error and status interrupts
// ..
// CAN driver functions structure
ARM_DRIVER_CAN Driver_CAN = {
CAN_GetVersion,
CAN_GetCapabilities,
CAN_Initialize,
CAN_Uninitialize,
CAN_PowerControl,
CAN_GetClock,
CAN_SetBitrate,
CAN_SetMode,
CAN_ObjectGetCapabilities,
CAN_ObjectSetFilter,
CAN_ObjectConfigure,
CAN_MessageSend,
CAN_MessageRead,
CAN_Control,
CAN_GetStatus
};
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/Driver/DriverTemplates/Driver_ETH_MAC.c 已删除 100644 → 0
浏览文件 @ f31aa182
/*
* Copyright (c) 2013-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Driver_ETH_MAC.h"
#define ARM_ETH_MAC_DRV_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2, 0) /* driver version */
/* Driver Version */
static const ARM_DRIVER_VERSION DriverVersion = {
ARM_ETH_MAC_API_VERSION,
ARM_ETH_MAC_DRV_VERSION
};
/* Driver Capabilities */
static const ARM_ETH_MAC_CAPABILITIES DriverCapabilities = {
0, /* 1 = IPv4 header checksum verified on receive */
0, /* 1 = IPv6 checksum verification supported on receive */
0, /* 1 = UDP payload checksum verified on receive */
0, /* 1 = TCP payload checksum verified on receive */
0, /* 1 = ICMP payload checksum verified on receive */
0, /* 1 = IPv4 header checksum generated on transmit */
0, /* 1 = IPv6 checksum generation supported on transmit */
0, /* 1 = UDP payload checksum generated on transmit */
0, /* 1 = TCP payload checksum generated on transmit */
0, /* 1 = ICMP payload checksum generated on transmit */
0, /* Ethernet Media Interface type */
0, /* 1 = driver provides initial valid MAC address */
0, /* 1 = callback event \ref ARM_ETH_MAC_EVENT_RX_FRAME generated */
0, /* 1 = callback event \ref ARM_ETH_MAC_EVENT_TX_FRAME generated */
0, /* 1 = wakeup event \ref ARM_ETH_MAC_EVENT_WAKEUP generated */
0 /* 1 = Precision Timer supported */
};
//
// Functions
//
ARM_DRIVER_VERSION ARM_ETH_MAC_GetVersion(void)
{
}
ARM_ETH_MAC_CAPABILITIES ARM_ETH_MAC_GetCapabilities(void)
{
}
int32_t ARM_ETH_MAC_Initialize(ARM_ETH_MAC_SignalEvent_t cb_event)
{
}
int32_t ARM_ETH_MAC_Uninitialize(void)
{
}
int32_t ARM_ETH_MAC_PowerControl(ARM_POWER_STATE state)
{
switch (state)
{
case ARM_POWER_OFF:
break;
case ARM_POWER_LOW:
break;
case ARM_POWER_FULL:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_ETH_MAC_GetMacAddress(ARM_ETH_MAC_ADDR *ptr_addr)
{
}
int32_t ARM_ETH_MAC_SetMacAddress(const ARM_ETH_MAC_ADDR *ptr_addr)
{
}
int32_t ARM_ETH_MAC_SetAddressFilter(const ARM_ETH_MAC_ADDR *ptr_addr, uint32_t num_addr)
{
}
int32_t ARM_ETH_MAC_SendFrame(const uint8_t *frame, uint32_t len, uint32_t flags)
{
}
int32_t ARM_ETH_MAC_ReadFrame(uint8_t *frame, uint32_t len)
{
}
uint32_t ARM_ETH_MAC_GetRxFrameSize(void)
{
}
int32_t ARM_ETH_MAC_GetRxFrameTime(ARM_ETH_MAC_TIME *time)
{
}
int32_t ARM_ETH_MAC_GetTxFrameTime(ARM_ETH_MAC_TIME *time)
{
}
int32_t ARM_ETH_MAC_Control(uint32_t control, uint32_t arg)
{
switch (control)
{
case ARM_ETH_MAC_CONFIGURE:
switch (arg & ARM_ETH_MAC_SPEED_Msk)
{
case ARM_ETH_MAC_SPEED_10M:
break;
case ARM_ETH_SPEED_100M:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
switch (arg & ARM_ETH_MAC_DUPLEX_Msk)
{
case ARM_ETH_MAC_DUPLEX_FULL:
break;
}
if (arg & ARM_ETH_MAC_LOOPBACK)
{
}
if ((arg & ARM_ETH_MAC_CHECKSUM_OFFLOAD_RX) ||
(arg & ARM_ETH_MAC_CHECKSUM_OFFLOAD_TX))
{
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
if (!(arg & ARM_ETH_MAC_ADDRESS_BROADCAST))
{
}
if (arg & ARM_ETH_MAC_ADDRESS_MULTICAST)
{
}
if (arg & ARM_ETH_MAC_ADDRESS_ALL)
{
}
break;
case ARM_ETH_MAC_CONTROL_TX:
break;
case ARM_ETH_MAC_CONTROL_RX:
break;
case ARM_ETH_MAC_FLUSH:
if (arg & ARM_ETH_MAC_FLUSH_RX)
{
}
if (arg & ARM_ETH_MAC_FLUSH_TX)
{
}
break;
case ARM_ETH_MAC_SLEEP:
break;
case ARM_ETH_MAC_VLAN_FILTER:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_ETH_MAC_ControlTimer(uint32_t control, ARM_ETH_MAC_TIME *time)
{
}
int32_t ARM_ETH_MAC_PHY_Read(uint8_t phy_addr, uint8_t reg_addr, uint16_t *data)
{
}
int32_t ARM_ETH_MAC_PHY_Write(uint8_t phy_addr, uint8_t reg_addr, uint16_t data)
{
}
void ARM_ETH_MAC_SignalEvent(uint32_t event)
{
}
// End ETH MAC Interface
ARM_DRIVER_ETH_MAC Driver_ETH_MAC =
{
ARM_ETH_MAC_GetVersion,
ARM_ETH_MAC_GetCapabilities,
ARM_ETH_MAC_Initialize,
ARM_ETH_MAC_Uninitialize,
ARM_ETH_MAC_PowerControl,
ARM_ETH_MAC_GetMacAddress,
ARM_ETH_MAC_SetMacAddress,
ARM_ETH_MAC_SetAddressFilter,
ARM_ETH_MAC_SendFrame,
ARM_ETH_MAC_ReadFrame,
ARM_ETH_MAC_GetRxFrameSize,
ARM_ETH_MAC_GetRxFrameTime,
ARM_ETH_MAC_GetTxFrameTime,
ARM_ETH_MAC_ControlTimer,
ARM_ETH_MAC_Control,
ARM_ETH_MAC_PHY_Read,
ARM_ETH_MAC_PHY_Write
};
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/Driver/DriverTemplates/Driver_ETH_PHY.c 已删除 100644 → 0
浏览文件 @ f31aa182
/*
* Copyright (c) 2013-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Driver_ETH_PHY.h"
#define ARM_ETH_PHY_DRV_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2, 0) /* driver version */
/* Driver Version */
static const ARM_DRIVER_VERSION DriverVersion = {
ARM_ETH_PHY_API_VERSION,
ARM_ETH_PHY_DRV_VERSION
};
//
// Functions
//
ARM_DRIVER_VERSION ARM_ETH_PHY_GetVersion(void)
{
}
int32_t ARM_ETH_PHY_Initialize(ARM_ETH_PHY_Read_t fn_read, ARM_ETH_PHY_Write_t fn_write)
{
}
int32_t ARM_ETH_PHY_Uninitialize(void)
{
}
int32_t ARM_ETH_PHY_PowerControl(ARM_POWER_STATE state)
{
switch (state)
{
case ARM_POWER_OFF:
break;
case ARM_POWER_LOW:
break;
case ARM_POWER_FULL:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_ETH_PHY_SetInterface(uint32_t interface)
{
switch (interface)
{
case ARM_ETH_INTERFACE_MII:
break;
case ARM_ETH_INTERFACE_RMII:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_ETH_PHY_SetMode(uint32_t mode)
{
switch (mode & ARM_ETH_PHY_SPEED_Msk)
{
case ARM_ETH_PHY_SPEED_10M:
break;
case ARM_ETH_PHY_SPEED_100M:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
switch (mode & ARM_ETH_PHY_DUPLEX_Msk)
{
case ARM_ETH_PHY_DUPLEX_HALF:
break;
case ARM_ETH_PHY_DUPLEX_FULL:
break;
}
if (mode & ARM_ETH_PHY_AUTO_NEGOTIATE)
{
}
if (mode & ARM_ETH_PHY_LOOPBACK)
{
}
if (mode & ARM_ETH_PHY_ISOLATE)
{
}
}
ARM_ETH_LINK_STATE ARM_ETH_PHY_GetLinkState(void)
{
}
ARM_ETH_LINK_INFO ARM_ETH_PHY_GetLinkInfo(void)
{
}
ARM_DRIVER_ETH_PHY ARM_Driver_ETH_PHY_(ETH_PHY_NUM) =
{
ARM_ETH_PHY_GetVersion,
ARM_ETH_PHY_Initialize,
ARM_ETH_PHY_Uninitialize,
ARM_ETH_PHY_PowerControl,
ARM_ETH_PHY_SetInterface,
ARM_ETH_PHY_SetMode,
ARM_ETH_PHY_GetLinkState,
ARM_ETH_PHY_GetLinkInfo,
};
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/Driver/DriverTemplates/Driver_Flash.c 已删除 100644 → 0
浏览文件 @ f31aa182
/*
* Copyright (c) 2013-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Driver_Flash.h"
#define ARM_FLASH_DRV_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(1, 0) /* driver version */
/* Sector Information */
#ifdef FLASH_SECTORS
static ARM_FLASH_SECTOR FLASH_SECTOR_INFO[FLASH_SECTOR_COUNT] = {
FLASH_SECTORS
};
#else
#define FLASH_SECTOR_INFO NULL
#endif
/* Flash Information */
static ARM_FLASH_INFO FlashInfo = {
0, /* FLASH_SECTOR_INFO */
0, /* FLASH_SECTOR_COUNT */
0, /* FLASH_SECTOR_SIZE */
0, /* FLASH_PAGE_SIZE */
0, /* FLASH_PROGRAM_UNIT */
0 /* FLASH_ERASED_VALUE */
};
/* Flash Status */
static ARM_FLASH_STATUS FlashStatus;
/* Driver Version */
static const ARM_DRIVER_VERSION DriverVersion = {
ARM_FLASH_API_VERSION,
ARM_FLASH_DRV_VERSION
};
/* Driver Capabilities */
static const ARM_FLASH_CAPABILITIES DriverCapabilities = {
0, /* event_ready */
0, /* data_width = 0:8-bit, 1:16-bit, 2:32-bit */
0 /* erase_chip */
};
//
// Functions
//
ARM_DRIVER_VERSION ARM_Flash_GetVersion(void)
{
}
ARM_FLASH_CAPABILITIES ARM_Flash_GetCapabilities(void)
{
}
int32_t ARM_Flash_Initialize(ARM_Flash_SignalEvent_t cb_event)
{
}
int32_t ARM_Flash_Uninitialize(void)
{
}
int32_t ARM_Flash_PowerControl(ARM_POWER_STATE state)
{
switch (state)
{
case ARM_POWER_OFF:
break;
case ARM_POWER_LOW:
break;
case ARM_POWER_FULL:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_Flash_ReadData(uint32_t addr, void *data, uint32_t cnt)
{
}
int32_t ARM_Flash_ProgramData(uint32_t addr, const void *data, uint32_t cnt)
{
}
int32_t ARM_Flash_EraseSector(uint32_t addr)
{
}
int32_t ARM_Flash_EraseChip(void)
{
}
ARM_FLASH_STATUS ARM_Flash_GetStatus(void)
{
}
ARM_FLASH_INFO * ARM_Flash_GetInfo(void)
{
}
void ARM_Flash_SignalEvent(uint32_t event)
{
}
// End Flash Interface
ARM_DRIVER_FLASH Driver_FLASH = {
ARM_Flash_GetVersion,
ARM_Flash_GetCapabilities,
ARM_Flash_Initialize,
ARM_Flash_Uninitialize,
ARM_Flash_PowerControl,
ARM_Flash_ReadData,
ARM_Flash_ProgramData,
ARM_Flash_EraseSector,
ARM_Flash_EraseChip,
ARM_Flash_GetStatus,
ARM_Flash_GetInfo
};
\ No newline at end of file
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/Driver/DriverTemplates/Driver_I2C.c 已删除 100644 → 0
浏览文件 @ f31aa182
/*
* Copyright (c) 2013-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Driver_I2C.h"
#define ARM_I2C_DRV_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2, 0) /* driver version */
/* Driver Version */
static const ARM_DRIVER_VERSION DriverVersion = {
ARM_I2C_API_VERSION,
ARM_I2C_DRV_VERSION
};
/* Driver Capabilities */
static const ARM_I2C_CAPABILITIES DriverCapabilities = {
0 /* supports 10-bit addressing */
};
//
// Functions
//
ARM_DRIVER_VERSION ARM_I2C_GetVersion(void)
{
}
ARM_I2C_CAPABILITIES ARM_I2C_GetCapabilities(void)
{
}
int32_t ARM_I2C_Initialize(ARM_I2C_SignalEvent_t cb_event)
{
}
int32_t ARM_I2C_Uninitialize(void)
{
}
int32_t ARM_I2C_PowerControl(ARM_POWER_STATE state)
{
switch (state)
{
case ARM_POWER_OFF:
break;
case ARM_POWER_LOW:
break;
case ARM_POWER_FULL:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_I2C_MasterTransmit(uint32_t addr, const uint8_t *data, uint32_t num, bool xfer_pending)
{
}
int32_t ARM_I2C_MasterReceive(uint32_t addr, uint8_t *data, uint32_t num, bool xfer_pending)
{
}
int32_t ARM_I2C_SlaveTransmit(const uint8_t *data, uint32_t num)
{
}
int32_t ARM_I2C_SlaveReceive(uint8_t *data, uint32_t num)
{
}
int32_t ARM_I2C_GetDataCount(void)
{
}
int32_t ARM_I2C_Control(uint32_t control, uint32_t arg)
{
switch (control)
{
case ARM_I2C_OWN_ADDRESS:
break;
case ARM_I2C_BUS_SPEED:
switch (arg)
{
case ARM_I2C_BUS_SPEED_STANDARD:
break;
case ARM_I2C_BUS_SPEED_FAST:
break;
case ARM_I2C_BUS_SPEED_FAST_PLUS:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
break;
case ARM_I2C_BUS_CLEAR:
break;
case ARM_I2C_ABORT_TRANSFER:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
ARM_I2C_STATUS ARM_I2C_GetStatus(void)
{
}
void ARM_I2C_SignalEvent(uint32_t event)
{
// function body
}
// End I2C Interface
ARM_DRIVER_I2C Driver_I2C = {
ARM_I2C_GetVersion,
ARM_I2C_GetCapabilities,
ARM_I2C_Initialize,
ARM_I2C_Uninitialize,
ARM_I2C_PowerControl,
ARM_I2C_MasterTransmit,
ARM_I2C_MasterReceive,
ARM_I2C_SlaveTransmit,
ARM_I2C_SlaveReceive,
ARM_I2C_GetDataCount,
ARM_I2C_Control,
ARM_I2C_GetStatus
};
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/Driver/DriverTemplates/Driver_MCI.c 已删除 100644 → 0
浏览文件 @ f31aa182
/*
* Copyright (c) 2013-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Driver_MCI.h"
#define ARM_MCI_DRV_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2, 0) /* driver version */
/* Driver Version */
static const ARM_DRIVER_VERSION DriverVersion = {
ARM_MCI_API_VERSION,
ARM_MCI_DRV_VERSION
};
/* Driver Capabilities */
static const ARM_MCI_CAPABILITIES DriverCapabilities = {
0, /* cd_state */
0, /* cd_event */
0, /* vdd */
0, /* vdd_1v8 */
0, /* vccq */
0, /* vccq_1v8 */
0, /* vccq_1v2 */
1, /* data_width_4 */
1, /* data_width_8 */
0, /* data_width_4_ddr */
0, /* data_width_8_ddr */
0, /* high_speed */
0, /* uhs_signaling */
0, /* uhs_tuning */
0, /* uhs_sdr50 */
0, /* uhs_sdr104 */
0, /* uhs_ddr50 */
0, /* uhs_driver_type_a */
0, /* uhs_driver_type_c */
0, /* uhs_driver_type_d */
1, /* sdio_interrupt */
1, /* read_wait */
0, /* suspend_resume */
0, /* mmc_interrupt */
0, /* mmc_boot */
0, /* ccs */
0 /* ccs_timeout */
};
//
// Functions
//
ARM_DRIVER_VERSION ARM_MCI_GetVersion(void)
{
}
ARM_MCI_CAPABILITIES ARM_MCI_GetCapabilities(void)
{
}
int32_t ARM_MCI_Initialize(ARM_MCI_SignalEvent_t cb_event)
{
}
int32_t ARM_MCI_Uninitialize(void)
{
}
int32_t ARM_MCI_PowerControl(ARM_POWER_STATE state)
{
switch (state)
{
case ARM_POWER_OFF:
break;
case ARM_POWER_LOW:
break;
case ARM_POWER_FULL:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_MCI_CardPower(uint32_t voltage)
{
switch (voltage & ARM_MCI_POWER_VDD_Msk)
{
case ARM_MCI_POWER_VDD_OFF:
return ARM_DRIVER_OK;
case ARM_MCI_POWER_VDD_3V3:
return ARM_DRIVER_OK;
default:
break;
}
}
int32_t ARM_MCI_ReadCD(void)
{
}
int32_t ARM_MCI_ReadWP(void)
{
}
int32_t ARM_MCI_SendCommand(uint32_t cmd, uint32_t arg, uint32_t flags, uint32_t *response)
{
}
int32_t ARM_MCI_SetupTransfer(uint8_t *data, uint32_t block_count, uint32_t block_size, uint32_t mode)
{
}
int32_t ARM_MCI_AbortTransfer(void)
{
}
int32_t ARM_MCI_Control(uint32_t control, uint32_t arg)
{
switch (control)
{
case ARM_MCI_BUS_SPEED:
break;
case ARM_MCI_BUS_SPEED_MODE:
break;
case ARM_MCI_BUS_CMD_MODE:
/* Implement external pull-up control to support MMC cards in open-drain mode */
/* Default mode is push-pull and is configured in Driver_MCI0.Initialize() */
if (arg == ARM_MCI_BUS_CMD_PUSH_PULL)
{
/* Configure external circuit to work in push-pull mode */
}
else if (arg == ARM_MCI_BUS_CMD_OPEN_DRAIN)
{
/* Configure external circuit to work in open-drain mode */
}
else
{
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
break;
case ARM_MCI_BUS_DATA_WIDTH:
switch (arg)
{
case ARM_MCI_BUS_DATA_WIDTH_1:
break;
case ARM_MCI_BUS_DATA_WIDTH_4:
break;
case ARM_MCI_BUS_DATA_WIDTH_8:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
break;
case ARM_MCI_CONTROL_RESET:
break;
case ARM_MCI_CONTROL_CLOCK_IDLE:
break;
case ARM_MCI_DATA_TIMEOUT:
break;
case ARM_MCI_MONITOR_SDIO_INTERRUPT:
break;
case ARM_MCI_CONTROL_READ_WAIT:
break;
case ARM_MCI_DRIVER_STRENGTH:
default: return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
ARM_MCI_STATUS ARM_MCI_GetStatus(void)
{
}
void ARM_MCI_SignalEvent(uint32_t event)
{
// function body
}
// End MCI Interface
ARM_DRIVER_MCI Driver_MCI = {
ARM_MCI_GetVersion,
ARM_MCI_GetCapabilities,
ARM_MCI_Initialize,
ARM_MCI_Uninitialize,
ARM_MCI_PowerControl,
ARM_MCI_CardPower,
ARM_MCI_ReadCD,
ARM_MCI_ReadWP,
ARM_MCI_SendCommand,
ARM_MCI_SetupTransfer,
ARM_MCI_AbortTransfer,
ARM_MCI_Control,
ARM_MCI_GetStatus
};
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/Driver/DriverTemplates/Driver_SAI.c 已删除 100644 → 0
浏览文件 @ f31aa182
/*
* Copyright (c) 2013-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Driver_SAI.h"
#define ARM_SAI_DRV_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(1, 0) /* driver version */
/* Driver Version */
static const ARM_DRIVER_VERSION DriverVersion = {
ARM_SAI_API_VERSION,
ARM_SAI_DRV_VERSION
};
/* Driver Capabilities */
static const ARM_SAI_CAPABILITIES DriverCapabilities = {
1, /* supports asynchronous Transmit/Receive */
0, /* supports synchronous Transmit/Receive */
0, /* supports user defined Protocol */
1, /* supports I2S Protocol */
0, /* supports MSB/LSB justified Protocol */
0, /* supports PCM short/long frame Protocol */
0, /* supports AC'97 Protocol */
0, /* supports Mono mode */
0, /* supports Companding */
0, /* supports MCLK (Master Clock) pin */
0 /* supports Frame error event: \ref ARM_SAI_EVENT_FRAME_ERROR */
};
//
// Functions
//
ARM_DRIVER_VERSION ARM_SAI_GetVersion (void)
{
}
ARM_SAI_CAPABILITIES ARM_SAI_GetCapabilities (void)
{
}
int32_t ARM_SAI_Initialize (ARM_SAI_SignalEvent_t cb_event)
{
}
int32_t ARM_SAI_Uninitialize (void)
{
}
int32_t ARM_SAI_PowerControl (ARM_POWER_STATE state)
{
switch (state)
{
case ARM_POWER_OFF:
break;
case ARM_POWER_LOW:
break;
case ARM_POWER_FULL:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_SAI_Send (const void *data, uint32_t num)
{
}
int32_t ARM_SAI_Receive (void *data, uint32_t num)
{
}
uint32_t ARM_SAI_GetTxCount (void)
{
}
uint32_t ARM_SAI_GetRxCount (void)
{
}
int32_t ARM_SAI_Control (uint32_t control, uint32_t arg1, uint32_t arg2)
{
}
ARM_SAI_STATUS ARM_SAI_GetStatus (void)
{
}
void ARM_SAI_SignalEvent(uint32_t event)
{
// function body
}
// End SAI Interface
ARM_DRIVER_SAI Driver_SAI = {
ARM_SAI_GetVersion,
ARM_SAI_GetCapabilities,
ARM_SAI_Initialize,
ARM_SAI_Uninitialize,
ARM_SAI_PowerControl,
ARM_SAI_Send,
ARM_SAI_Receive,
ARM_SAI_GetTxCount,
ARM_SAI_GetRxCount,
ARM_SAI_Control,
ARM_SAI_GetStatus
};
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/Driver/DriverTemplates/Driver_SPI.c 已删除 100644 → 0
浏览文件 @ f31aa182
/*
* Copyright (c) 2013-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Driver_SPI.h"
#define ARM_SPI_DRV_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2, 0) /* driver version */
/* Driver Version */
static const ARM_DRIVER_VERSION DriverVersion = {
ARM_SPI_API_VERSION,
ARM_SPI_DRV_VERSION
};
/* Driver Capabilities */
static const ARM_SPI_CAPABILITIES DriverCapabilities = {
1, /* Simplex Mode (Master and Slave) */
1, /* TI Synchronous Serial Interface */
1, /* Microwire Interface */
0 /* Signal Mode Fault event: \ref ARM_SPI_EVENT_MODE_FAULT */
};
//
// Functions
//
ARM_DRIVER_VERSION ARM_SPI_GetVersion(void)
{
}
ARM_SPI_CAPABILITIES ARM_SPI_GetCapabilities(void)
{
}
int32_t ARM_SPI_Initialize(ARM_SPI_SignalEvent_t cb_event)
{
}
int32_t ARM_SPI_Uninitialize(void)
{
}
int32_t ARM_SPI_PowerControl(ARM_POWER_STATE state)
{
switch (state)
{
case ARM_POWER_OFF:
break;
case ARM_POWER_LOW:
break;
case ARM_POWER_FULL:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_SPI_Send(const void *data, uint32_t num)
{
}
int32_t ARM_SPI_Receive(void *data, uint32_t num)
{
}
int32_t ARM_SPI_Transfer(const void *data_out, void *data_in, uint32_t num)
{
}
uint32_t ARM_SPI_GetDataCount(void)
{
}
int32_t ARM_SPI_Control(uint32_t control, uint32_t arg)
{
switch (control & ARM_SPI_CONTROL_Msk)
{
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
case ARM_SPI_MODE_INACTIVE: // SPI Inactive
return ARM_DRIVER_OK;
case ARM_SPI_MODE_MASTER: // SPI Master (Output on MOSI, Input on MISO); arg = Bus Speed in bps
break;
case ARM_SPI_MODE_SLAVE: // SPI Slave (Output on MISO, Input on MOSI)
break;
case ARM_SPI_MODE_MASTER_SIMPLEX: // SPI Master (Output/Input on MOSI); arg = Bus Speed in bps
case ARM_SPI_MODE_SLAVE_SIMPLEX: // SPI Slave (Output/Input on MISO)
return ARM_SPI_ERROR_MODE;
case ARM_SPI_SET_BUS_SPEED: // Set Bus Speed in bps; arg = value
break;
case ARM_SPI_GET_BUS_SPEED: // Get Bus Speed in bps
break;
case ARM_SPI_SET_DEFAULT_TX_VALUE: // Set default Transmit value; arg = value
break;
case ARM_SPI_CONTROL_SS: // Control Slave Select; arg = 0:inactive, 1:active
break;
case ARM_SPI_ABORT_TRANSFER: // Abort current data transfer
break;
}
}
ARM_SPI_STATUS ARM_SPI_GetStatus(void)
{
}
void ARM_SPI_SignalEvent(uint32_t event)
{
// function body
}
// End SPI Interface
ARM_DRIVER_SPI Driver_SPI = {
ARM_SPI_GetVersion,
ARM_SPI_GetCapabilities,
ARM_SPI_Initialize,
ARM_SPI_Uninitialize,
ARM_SPI_PowerControl,
ARM_SPI_Send,
ARM_SPI_Receive,
ARM_SPI_Transfer,
ARM_SPI_GetDataCount,
ARM_SPI_Control,
ARM_SPI_GetStatus
};
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/Driver/DriverTemplates/Driver_Storage.c 已删除 100644 → 0
浏览文件 @ f31aa182
/*
* Copyright (c) 2013-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Driver_Storage.h"
#define ARM_STORAGE_DRV_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(1, 0) /* driver version */
/* Driver Version */
static const ARM_DRIVER_VERSION DriverVersion = {
ARM_STORAGE_API_VERSION,
ARM_STORAGE_DRV_VERSION
};
/* Driver Capabilities */
static const ARM_STORAGE_CAPABILITIES DriverCapabilities = {
1, /* Asynchronous Mode */
1, /* Supports EraseAll operation */
0 /* Reserved */
};
//
// Functions
//
ARM_DRIVER_VERSION ARM_Storage_GetVersion (void) {
}
ARM_STORAGE_CAPABILITIES ARM_Storage_GetCapabilities (void) {
}
int32_t ARM_Storage_Initialize (ARM_Storage_Callback_t callback) {
}
int32_t ARM_Storage_Uninitialize (void) {
}
int32_t ARM_Storage_PowerControl (ARM_POWER_STATE state)
{
switch (state)
{
case ARM_POWER_OFF:
break;
case ARM_POWER_LOW:
break;
case ARM_POWER_FULL:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_Storage_ReadData (uint64_t addr, void *data, uint32_t size) {
}
int32_t ARM_Storage_ProgramData (uint64_t addr, const void *data, uint32_t size) {
}
int32_t ARM_Storage_Erase (uint64_t addr, uint32_t size) {
}
int32_t ARM_Storage_EraseAll (void) {
}
ARM_STORAGE_STATUS ARM_Storage_GetStatus (void) {
}
int32_t ARM_Storage_GetInfo (ARM_STORAGE_INFO *info) {
}
uint32_t ARM_Storage_ResolveAddress(uint64_t addr) {
}
int32_t ARM_Storage_GetNextBlock(const ARM_STORAGE_BLOCK* prev_block, ARM_STORAGE_BLOCK *next_block) {
}
int32_t ARM_Storage_GetBlock(uint64_t addr, ARM_STORAGE_BLOCK *block) {
}
// End Storage Interface
ARM_DRIVER_STORAGE Driver_STORAGE = {
ARM_Storage_GetVersion,
ARM_Storage_GetCapabilities,
ARM_Storage_Initialize,
ARM_Storage_Uninitialize,
ARM_Storage_PowerControl,
ARM_Storage_ReadData,
ARM_Storage_ProgramData,
ARM_Storage_Erase,
ARM_Storage_EraseAll,
ARM_Storage_GetStatus,
ARM_Storage_GetInfo,
ARM_Storage_ResolveAddress,
ARM_Storage_GetNextBlock,
ARM_Storage_GetBlock
};
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/Driver/DriverTemplates/Driver_USART.c 已删除 100644 → 0
浏览文件 @ f31aa182
/*
* Copyright (c) 2013-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Driver_USART.h"
#define ARM_USART_DRV_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2, 0) /* driver version */
/* Driver Version */
static const ARM_DRIVER_VERSION DriverVersion = {
ARM_USART_API_VERSION,
ARM_USART_DRV_VERSION
};
/* Driver Capabilities */
static const ARM_USART_CAPABILITIES DriverCapabilities = {
1, /* supports UART (Asynchronous) mode */
0, /* supports Synchronous Master mode */
0, /* supports Synchronous Slave mode */
0, /* supports UART Single-wire mode */
0, /* supports UART IrDA mode */
0, /* supports UART Smart Card mode */
0, /* Smart Card Clock generator available */
0, /* RTS Flow Control available */
0, /* CTS Flow Control available */
0, /* Transmit completed event: \ref ARM_USART_EVENT_TX_COMPLETE */
0, /* Signal receive character timeout event: \ref ARM_USART_EVENT_RX_TIMEOUT */
0, /* RTS Line: 0=not available, 1=available */
0, /* CTS Line: 0=not available, 1=available */
0, /* DTR Line: 0=not available, 1=available */
0, /* DSR Line: 0=not available, 1=available */
0, /* DCD Line: 0=not available, 1=available */
0, /* RI Line: 0=not available, 1=available */
0, /* Signal CTS change event: \ref ARM_USART_EVENT_CTS */
0, /* Signal DSR change event: \ref ARM_USART_EVENT_DSR */
0, /* Signal DCD change event: \ref ARM_USART_EVENT_DCD */
0 /* Signal RI change event: \ref ARM_USART_EVENT_RI */
};
//
// Functions
//
ARM_DRIVER_VERSION ARM_USART_GetVersion(void)
{
}
ARM_USART_CAPABILITIES ARM_USART_GetCapabilities(void)
{
}
int32_t ARM_USART_Initialize(ARM_USART_SignalEvent_t cb_event)
{
}
int32_t ARM_USART_Uninitialize(void)
{
}
int32_t ARM_USART_PowerControl(ARM_POWER_STATE state)
{
switch (state)
{
case ARM_POWER_OFF:
break;
case ARM_POWER_LOW:
break;
case ARM_POWER_FULL:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_USART_Send(const void *data, uint32_t num)
{
}
int32_t ARM_USART_Receive(void *data, uint32_t num)
{
}
int32_t ARM_USART_Transfer(const void *data_out, void *data_in, uint32_t num)
{
}
uint32_t ARM_USART_GetTxCount(void)
{
}
uint32_t ARM_USART_GetRxCount(void)
{
}
int32_t ARM_USART_Control(uint32_t control, uint32_t arg)
{
}
ARM_USART_STATUS ARM_USART_GetStatus(void)
{
}
int32_t ARM_USART_SetModemControl(ARM_USART_MODEM_CONTROL control)
{
}
ARM_USART_MODEM_STATUS ARM_USART_GetModemStatus(void)
{
}
void ARM_USART_SignalEvent(uint32_t event)
{
// function body
}
// End USART Interface
ARM_DRIVER_USART Driver_USART = {
ARM_USART_GetVersion,
ARM_USART_GetCapabilities,
ARM_USART_Initialize,
ARM_USART_Uninitialize,
ARM_USART_PowerControl,
ARM_USART_Send,
ARM_USART_Receive,
ARM_USART_Transfer,
ARM_USART_GetTxCount,
ARM_USART_GetRxCount,
ARM_USART_Control,
ARM_USART_GetStatus,
ARM_USART_SetModemControl,
ARM_USART_GetModemStatus
};
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/Driver/DriverTemplates/Driver_USBD.c 已删除 100644 → 0
浏览文件 @ f31aa182
/*
* Copyright (c) 2013-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Driver_USBD.h"
#define ARM_USBD_DRV_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2, 0) /* driver version */
/* Driver Version */
static const ARM_DRIVER_VERSION usbd_driver_version = {
ARM_USBD_API_VERSION,
ARM_USBD_DRV_VERSION
};
/* Driver Capabilities */
static const ARM_USBD_CAPABILITIES usbd_driver_capabilities = {
0, /* vbus_detection */
0, /* event_vbus_on */
0 /* event_vbus_off */
};
//
// Functions
//
ARM_DRIVER_VERSION ARM_USBD_GetVersion(void)
{
}
ARM_USBD_CAPABILITIES ARM_USBD_GetCapabilities(void)
{
}
int32_t ARM_USBD_Initialize(ARM_USBD_SignalDeviceEvent_t cb_device_event,
ARM_USBD_SignalEndpointEvent_t cb_endpoint_event)
{
}
int32_t ARM_USBD_Uninitialize(void)
{
}
int32_t ARM_USBD_PowerControl(ARM_POWER_STATE state)
{
switch (state)
{
case ARM_POWER_OFF:
break;
case ARM_POWER_LOW:
break;
case ARM_POWER_FULL:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_USBD_DeviceConnect(void)
{
}
int32_t ARM_USBD_DeviceDisconnect(void)
{
}
ARM_USBD_STATE ARM_USBD_DeviceGetState(void)
{
}
int32_t ARM_USBD_DeviceRemoteWakeup(void)
{
}
int32_t ARM_USBD_DeviceSetAddress(uint8_t dev_addr)
{
}
int32_t ARM_USBD_ReadSetupPacket(uint8_t *setup)
{
}
int32_t ARM_USBD_EndpointConfigure(uint8_t ep_addr,
uint8_t ep_type,
uint16_t ep_max_packet_size)
{
}
int32_t ARM_USBD_EndpointUnconfigure(uint8_t ep_addr)
{
}
int32_t ARM_USBD_EndpointStall(uint8_t ep_addr, bool stall)
{
}
int32_t ARM_USBD_EndpointTransfer(uint8_t ep_addr, uint8_t *data, uint32_t num)
{
}
uint32_t ARM_USBD_EndpointTransferGetResult(uint8_t ep_addr)
{
}
int32_t ARM_USBD_EndpointTransferAbort(uint8_t ep_addr)
{
}
uint16_t ARM_USBD_GetFrameNumber(void)
{
}
void ARM_USBD_SignalDeviceEvent(uint32_t event)
{
// function body
}
void ARM_USBD_SignalEndpointEvent(uint8_t ep_addr, uint32_t ep_event)
{
// function body
}
// End USBD Interface
ARM_DRIVER_USBD Driver_USBD =
{
ARM_USBD_GetVersion,
ARM_USBD_GetCapabilities,
ARM_USBD_Initialize,
ARM_USBD_Uninitialize,
ARM_USBD_PowerControl,
ARM_USBD_DeviceConnect,
ARM_USBD_DeviceDisconnect,
ARM_USBD_DeviceGetState,
ARM_USBD_DeviceRemoteWakeup,
ARM_USBD_DeviceSetAddress,
ARM_USBD_ReadSetupPacket,
ARM_USBD_EndpointConfigure,
ARM_USBD_EndpointUnconfigure,
ARM_USBD_EndpointStall,
ARM_USBD_EndpointTransfer,
ARM_USBD_EndpointTransferGetResult,
ARM_USBD_EndpointTransferAbort,
ARM_USBD_GetFrameNumber
};
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/Driver/DriverTemplates/Driver_USBH.c 已删除 100644 → 0
浏览文件 @ f31aa182
/*
* Copyright (c) 2013-2018 Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "Driver_USBH.h"
/* USB Host Driver */
#define ARM_USBH_DRV_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2, 0) /* driver version */
/* Driver Version */
static const ARM_DRIVER_VERSION usbh_driver_version = {
ARM_USBH_API_VERSION,
ARM_USBH_DRV_VERSION
};
/* Driver Capabilities */
static const ARM_USBH_CAPABILITIES usbd_driver_capabilities = {
0x0001, /* Root HUB available Ports Mask */
0, /* Automatic SPLIT packet handling */
0, /* Signal Connect event */
0, /* Signal Disconnect event */
0 /* Signal Overcurrent event */
};
//
// Functions
//
ARM_DRIVER_VERSION ARM_USBH_GetVersion(void)
{
}
ARM_USBH_CAPABILITIES ARM_USBH_GetCapabilities(void)
{
}
int32_t ARM_USBH_Initialize(ARM_USBH_SignalPortEvent_t cb_port_event,
ARM_USBH_SignalEndpointEvent_t cb_endpoint_event)
{
}
int32_t ARM_USBH_Uninitialize(void)
{
}
int32_t ARM_USBH_PowerControl(ARM_POWER_STATE state)
{
switch (state)
{
case ARM_POWER_OFF:
break;
case ARM_POWER_LOW:
break;
case ARM_POWER_FULL:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_USBH_PortVbusOnOff(uint8_t port, bool vbus)
{
}
int32_t ARM_USBH_PortReset(uint8_t port)
{
}
int32_t ARM_USBH_PortSuspend(uint8_t port)
{
}
int32_t ARM_USBH_PortResume(uint8_t port)
{
}
ARM_USBH_PORT_STATE ARM_USBH_PortGetState(uint8_t port)
{
}
ARM_USBH_EP_HANDLE ARM_USBH_EndpointCreate(uint8_t dev_addr,
uint8_t dev_speed,
uint8_t hub_addr,
uint8_t hub_port,
uint8_t ep_addr,
uint8_t ep_type,
uint16_t ep_max_packet_size,
uint8_t ep_interval)
{
}
int32_t ARM_USBH_EndpointModify(ARM_USBH_EP_HANDLE ep_hndl,
uint8_t dev_addr,
uint8_t dev_speed,
uint8_t hub_addr,
uint8_t hub_port,
uint16_t ep_max_packet_size)
{
}
int32_t ARM_USBH_EndpointDelete(ARM_USBH_EP_HANDLE ep_hndl)
{
}
int32_t ARM_USBH_EndpointReset(ARM_USBH_EP_HANDLE ep_hndl)
{
}
int32_t ARM_USBH_EndpointTransfer(ARM_USBH_EP_HANDLE ep_hndl,
uint32_t packet,
uint8_t *data,
uint32_t num)
{
}
uint32_t ARM_USBH_EndpointTransferGetResult(ARM_USBH_EP_HANDLE ep_hndl)
{
}
int32_t ARM_USBH_EndpointTransferAbort(ARM_USBH_EP_HANDLE ep_hndl)
{
}
uint16_t ARM_USBH_GetFrameNumber(void)
{
}
void ARM_USBH_SignalPortEvent(uint8_t port, uint32_t event)
{
// function body
}
void ARM_USBH_SignalEndpointEvent(ARM_USBH_EP_HANDLE ep_hndl, uint32_t event)
{
// function body
}
/* USB Host HCI (OHCI/EHCI) Driver */
/* Driver Version */
static const ARM_DRIVER_VERSION usbh_hci_driver_version = {
ARM_USBH_API_VERSION,
ARM_USBH_DRV_VERSION
};
/* Driver Capabilities */
static const ARM_USBH_HCI_CAPABILITIES usbh_hci_driver_capabilities = {
0x0001 /* Root HUB available Ports Mask */
};
//
// Functions
//
ARM_DRIVER_VERSION ARM_USBH_HCI_GetVersion(void)
{
}
ARM_USBH_HCI_CAPABILITIES ARM_USBH_HCI_GetCapabilities(void)
{
}
int32_t ARM_USBH_HCI_Initialize(ARM_USBH_HCI_Interrupt_t cb_interrupt)
{
}
int32_t ARM_USBH_HCI_Uninitialize(void)
{
}
int32_t ARM_USBH_HCI_PowerControl(ARM_POWER_STATE state)
{
switch (state)
{
case ARM_POWER_OFF:
break;
case ARM_POWER_LOW:
break;
case ARM_POWER_FULL:
break;
default:
return ARM_DRIVER_ERROR_UNSUPPORTED;
}
}
int32_t ARM_USBH_HCI_PortVbusOnOff(uint8_t port, bool vbus)
{
}
void ARM_USBH_HCI_Interrupt(void)
{
// function body
}
// End USBH Interface
ARM_DRIVER_USBH_HCI Driver_USBH_HCI = {
ARM_USBH_HCI_GetVersion,
ARM_USBH_HCI_GetCapabilities,
ARM_USBH_HCI_Initialize,
ARM_USBH_HCI_Uninitialize,
ARM_USBH_HCI_PowerControl,
ARM_USBH_HCI_PortVbusOnOff
};
bsp/imxrt/imxrt1064-nxp-evk/README.md
浏览文件 @ bd55bf7d
......@@ -14,8 +14,6 @@
## 开发板介绍
【此处简单介绍一下开发板】
开发板外观如下图所示：
![board](figures/MIMXRT1064EVK-TOP.jpg)
......@@ -87,15 +85,15 @@
#### 运行结果
下载程序成功之后，系统会自动运行，【这里写开发板运行起来之后的现象，如：LED 闪烁等】。
下载程序成功之后，系统会自动运行，LED会以1Hz的频率闪烁。
连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息:
```bash
\ | /
- RT - Thread Operating System
/ | \ 3.1.1 build Nov 19 2018
2006 - 2018 Copyright by rt-thread team
/ | \ 4.0.2 build Jul 5 2019
2006 - 2019 Copyright by rt-thread team
msh >
```
### 进阶使用
......@@ -112,9 +110,6 @@ msh >
本章节更多详细的介绍请参考 [IMXRT 系列 BSP 外设驱动使用教程](../docs/IMXRT系列BSP外设驱动使用教程.md)。
## 注意事项
-
## 联系人信息
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或