提交 41597e87 编写于 作者: W weety

Add mmc and emmc drivers.

上级 562ac32e
/*
* File : mmc.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
* 2015-06-15 hichard first version
*/
#ifndef __MMC_H__
#define __MMC_H__
#include <rtthread.h>
#include <drivers/mmcsd_host.h>
#ifdef __cplusplus
extern "C" {
#endif
/*
* EXT_CSD fields
*/
#define EXT_CSD_FLUSH_CACHE 32 /* W */
#define EXT_CSD_CACHE_CTRL 33 /* R/W */
#define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */
#define EXT_CSD_PACKED_FAILURE_INDEX 35 /* RO */
#define EXT_CSD_PACKED_CMD_STATUS 36 /* RO */
#define EXT_CSD_EXP_EVENTS_STATUS 54 /* RO, 2 bytes */
#define EXT_CSD_EXP_EVENTS_CTRL 56 /* R/W, 2 bytes */
#define EXT_CSD_DATA_SECTOR_SIZE 61 /* R */
#define EXT_CSD_GP_SIZE_MULT 143 /* R/W */
#define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */
#define EXT_CSD_PARTITION_SUPPORT 160 /* RO */
#define EXT_CSD_HPI_MGMT 161 /* R/W */
#define EXT_CSD_RST_N_FUNCTION 162 /* R/W */
#define EXT_CSD_BKOPS_EN 163 /* R/W */
#define EXT_CSD_BKOPS_START 164 /* W */
#define EXT_CSD_SANITIZE_START 165 /* W */
#define EXT_CSD_WR_REL_PARAM 166 /* RO */
#define EXT_CSD_RPMB_MULT 168 /* RO */
#define EXT_CSD_BOOT_WP 173 /* R/W */
#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
#define EXT_CSD_PART_CONFIG 179 /* R/W */
#define EXT_CSD_ERASED_MEM_CONT 181 /* RO */
#define EXT_CSD_BUS_WIDTH 183 /* R/W */
#define EXT_CSD_HS_TIMING 185 /* R/W */
#define EXT_CSD_POWER_CLASS 187 /* R/W */
#define EXT_CSD_REV 192 /* RO */
#define EXT_CSD_STRUCTURE 194 /* RO */
#define EXT_CSD_CARD_TYPE 196 /* RO */
#define EXT_CSD_OUT_OF_INTERRUPT_TIME 198 /* RO */
#define EXT_CSD_PART_SWITCH_TIME 199 /* RO */
#define EXT_CSD_PWR_CL_52_195 200 /* RO */
#define EXT_CSD_PWR_CL_26_195 201 /* RO */
#define EXT_CSD_PWR_CL_52_360 202 /* RO */
#define EXT_CSD_PWR_CL_26_360 203 /* RO */
#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
#define EXT_CSD_S_A_TIMEOUT 217 /* RO */
#define EXT_CSD_REL_WR_SEC_C 222 /* RO */
#define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */
#define EXT_CSD_ERASE_TIMEOUT_MULT 223 /* RO */
#define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */
#define EXT_CSD_BOOT_MULT 226 /* RO */
#define EXT_CSD_SEC_TRIM_MULT 229 /* RO */
#define EXT_CSD_SEC_ERASE_MULT 230 /* RO */
#define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */
#define EXT_CSD_TRIM_MULT 232 /* RO */
#define EXT_CSD_PWR_CL_200_195 236 /* RO */
#define EXT_CSD_PWR_CL_200_360 237 /* RO */
#define EXT_CSD_PWR_CL_DDR_52_195 238 /* RO */
#define EXT_CSD_PWR_CL_DDR_52_360 239 /* RO */
#define EXT_CSD_BKOPS_STATUS 246 /* RO */
#define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */
#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */
#define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */
#define EXT_CSD_PWR_CL_DDR_200_360 253 /* RO */
#define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */
#define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */
#define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */
#define EXT_CSD_MAX_PACKED_READS 501 /* RO */
#define EXT_CSD_BKOPS_SUPPORT 502 /* RO */
#define EXT_CSD_HPI_FEATURES 503 /* RO */
/*
* EXT_CSD field definitions
*/
#define EXT_CSD_WR_REL_PARAM_EN (1<<2)
#define EXT_CSD_BOOT_WP_B_PWR_WP_DIS (0x40)
#define EXT_CSD_BOOT_WP_B_PERM_WP_DIS (0x10)
#define EXT_CSD_BOOT_WP_B_PERM_WP_EN (0x04)
#define EXT_CSD_BOOT_WP_B_PWR_WP_EN (0x01)
#define EXT_CSD_PART_CONFIG_ACC_MASK (0x7)
#define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1)
#define EXT_CSD_PART_CONFIG_ACC_RPMB (0x3)
#define EXT_CSD_PART_CONFIG_ACC_GP0 (0x4)
#define EXT_CSD_PART_SUPPORT_PART_EN (0x1)
#define EXT_CSD_CMD_SET_NORMAL (1<<0)
#define EXT_CSD_CMD_SET_SECURE (1<<1)
#define EXT_CSD_CMD_SET_CPSECURE (1<<2)
#define EXT_CSD_CARD_TYPE_HS_26 (1<<0) /* Card can run at 26MHz */
#define EXT_CSD_CARD_TYPE_HS_52 (1<<1) /* Card can run at 52MHz */
#define EXT_CSD_CARD_TYPE_HS (EXT_CSD_CARD_TYPE_HS_26 | \
EXT_CSD_CARD_TYPE_HS_52)
#define EXT_CSD_CARD_TYPE_DDR_1_8V (1<<2) /* Card can run at 52MHz */
/* DDR mode @1.8V or 3V I/O */
#define EXT_CSD_CARD_TYPE_DDR_1_2V (1<<3) /* Card can run at 52MHz */
/* DDR mode @1.2V I/O */
#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
| EXT_CSD_CARD_TYPE_DDR_1_2V)
#define EXT_CSD_CARD_TYPE_HS200_1_8V (1<<4) /* Card can run at 200MHz */
#define EXT_CSD_CARD_TYPE_HS200_1_2V (1<<5) /* Card can run at 200MHz */
/* SDR mode @1.2V I/O */
#define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \
EXT_CSD_CARD_TYPE_HS200_1_2V)
#define EXT_CSD_CARD_TYPE_HS400_1_8V (1<<6) /* Card can run at 200MHz DDR, 1.8V */
#define EXT_CSD_CARD_TYPE_HS400_1_2V (1<<7) /* Card can run at 200MHz DDR, 1.2V */
#define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \
EXT_CSD_CARD_TYPE_HS400_1_2V)
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */
#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */
#define EXT_CSD_TIMING_BC 0 /* Backwards compatility */
#define EXT_CSD_TIMING_HS 1 /* High speed */
#define EXT_CSD_TIMING_HS200 2 /* HS200 */
#define EXT_CSD_TIMING_HS400 3 /* HS400 */
#define EXT_CSD_SEC_ER_EN BIT(0)
#define EXT_CSD_SEC_BD_BLK_EN BIT(2)
#define EXT_CSD_SEC_GB_CL_EN BIT(4)
#define EXT_CSD_SEC_SANITIZE BIT(6) /* v4.5 only */
#define EXT_CSD_RST_N_EN_MASK 0x3
#define EXT_CSD_RST_N_ENABLED 1 /* RST_n is enabled on card */
#define EXT_CSD_NO_POWER_NOTIFICATION 0
#define EXT_CSD_POWER_ON 1
#define EXT_CSD_POWER_OFF_SHORT 2
#define EXT_CSD_POWER_OFF_LONG 3
#define EXT_CSD_PWR_CL_8BIT_MASK 0xF0 /* 8 bit PWR CLS */
#define EXT_CSD_PWR_CL_4BIT_MASK 0x0F /* 8 bit PWR CLS */
#define EXT_CSD_PWR_CL_8BIT_SHIFT 4
#define EXT_CSD_PWR_CL_4BIT_SHIFT 0
#define EXT_CSD_PACKED_EVENT_EN BIT(3)
/*
* EXCEPTION_EVENT_STATUS field
*/
#define EXT_CSD_URGENT_BKOPS BIT(0)
#define EXT_CSD_DYNCAP_NEEDED BIT(1)
#define EXT_CSD_SYSPOOL_EXHAUSTED BIT(2)
#define EXT_CSD_PACKED_FAILURE BIT(3)
#define EXT_CSD_PACKED_GENERIC_ERROR BIT(0)
#define EXT_CSD_PACKED_INDEXED_ERROR BIT(1)
/*
* BKOPS status level
*/
#define EXT_CSD_BKOPS_LEVEL_2 0x2
/*
* MMC_SWITCH access modes
*/
#define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */
#define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits which are 1 in value */
#define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits which are 1 in value */
#define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */
/*
* extern function
*/
rt_err_t mmc_send_op_cond(struct rt_mmcsd_host *host, rt_uint32_t ocr, rt_uint32_t *rocr);
rt_int32_t init_mmc(struct rt_mmcsd_host *host, rt_uint32_t ocr);
#ifdef __cplusplus
}
#endif
#endif
......@@ -153,6 +153,7 @@ struct rt_mmcsd_card {
rt_uint32_t max_data_rate; /* max data transfer rate */
rt_uint32_t card_capacity; /* card capacity, unit:KB */
rt_uint32_t card_blksize; /* card block size */
rt_uint32_t erase_size; /* erase size in sectors */
rt_uint16_t card_type;
#define CARD_TYPE_MMC 0 /* MMC card */
#define CARD_TYPE_SD 1 /* SD card */
......
......@@ -7,6 +7,7 @@ block_dev.c
mmcsd_core.c
sd.c
sdio.c
mmc.c
""")
# The set of source files associated with this SConscript file.
......
......@@ -149,7 +149,7 @@ static rt_err_t rt_mmcsd_req_blk(struct rt_mmcsd_card *card,
}
else
{
req.stop = NULL;
req.stop = RT_NULL;
r_cmd = READ_SINGLE_BLOCK;
w_cmd = WRITE_BLOCK;
}
......@@ -408,15 +408,8 @@ rt_int32_t rt_mmcsd_blk_probe(struct rt_mmcsd_card *card)
blk_dev->geometry.bytes_per_sector = 1<<9;
blk_dev->geometry.block_size = card->card_blksize;
if (card->flags & CARD_FLAG_SDHC)
{
blk_dev->geometry.sector_count = (card->csd.c_size + 1) * 1024;
}
else
{
blk_dev->geometry.sector_count =
card->card_capacity * 1024 / 512;
}
blk_dev->geometry.sector_count =
card->card_capacity * (1024 / 512);
rt_device_register(&blk_dev->dev, "sd0",
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_REMOVABLE | RT_DEVICE_FLAG_STANDALONE);
......
/*
* File : mmc.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2006, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
* 2015-06-15 hichard first version
*/
#include <drivers/mmcsd_core.h>
#include <drivers/mmc.h>
static const rt_uint32_t tran_unit[] =
{
10000, 100000, 1000000, 10000000,
0, 0, 0, 0
};
static const rt_uint8_t tran_value[] =
{
0, 10, 12, 13, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 70, 80,
};
static const rt_uint32_t tacc_uint[] =
{
1, 10, 100, 1000, 10000, 100000, 1000000, 10000000,
};
static const rt_uint8_t tacc_value[] =
{
0, 10, 12, 13, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 70, 80,
};
rt_inline rt_uint32_t GET_BITS(rt_uint32_t *resp,
rt_uint32_t start,
rt_uint32_t size)
{
const rt_int32_t __size = size;
const rt_uint32_t __mask = (__size < 32 ? 1 << __size : 0) - 1;
const rt_int32_t __off = 3 - ((start) / 32);
const rt_int32_t __shft = (start) & 31;
rt_uint32_t __res;
__res = resp[__off] >> __shft;
if (__size + __shft > 32)
__res |= resp[__off-1] << ((32 - __shft) % 32);
return __res & __mask;
}
/*
* Given a 128-bit response, decode to our card CSD structure.
*/
static rt_int32_t mmcsd_parse_csd(struct rt_mmcsd_card *card)
{
rt_uint32_t a, b;
struct rt_mmcsd_csd *csd = &card->csd;
rt_uint32_t *resp = card->resp_csd;
/*
* We only understand CSD structure v1.1 and v1.2.
* v1.2 has extra information in bits 15, 11 and 10.
* We also support eMMC v4.4 & v4.41.
*/
csd->csd_structure = GET_BITS(resp, 126, 2);
if (csd->csd_structure == 0) {
rt_kprintf("unrecognised CSD structure version %d\n", csd->csd_structure);
return -RT_ERROR;
}
csd->taac = GET_BITS(resp, 112, 8);
csd->nsac = GET_BITS(resp, 104, 8);
csd->tran_speed = GET_BITS(resp, 96, 8);
csd->card_cmd_class = GET_BITS(resp, 84, 12);
csd->rd_blk_len = GET_BITS(resp, 80, 4);
csd->rd_blk_part = GET_BITS(resp, 79, 1);
csd->wr_blk_misalign = GET_BITS(resp, 78, 1);
csd->rd_blk_misalign = GET_BITS(resp, 77, 1);
csd->dsr_imp = GET_BITS(resp, 76, 1);
csd->c_size = GET_BITS(resp, 62, 12);
csd->c_size_mult = GET_BITS(resp, 47, 3);
csd->r2w_factor = GET_BITS(resp, 26, 3);
csd->wr_blk_len = GET_BITS(resp, 22, 4);
csd->wr_blk_partial = GET_BITS(resp, 21, 1);
csd->csd_crc = GET_BITS(resp, 1, 7);
card->card_blksize = 1 << csd->rd_blk_len;
card->tacc_clks = csd->nsac * 100;
card->tacc_ns = (tacc_uint[csd->taac&0x07] * tacc_value[(csd->taac&0x78)>>3] + 9) / 10;
card->max_data_rate = tran_unit[csd->tran_speed&0x07] * tran_value[(csd->tran_speed&0x78)>>3];
if (csd->wr_blk_len >= 9) {
a = GET_BITS(resp, 42, 5);
b = GET_BITS(resp, 37, 5);
card->erase_size = (a + 1) * (b + 1);
card->erase_size <<= csd->wr_blk_len - 9;
}
return 0;
}
/*
* Read extended CSD.
*/
static int mmc_get_ext_csd(struct rt_mmcsd_card *card, rt_uint8_t **new_ext_csd)
{
void *ext_csd;
struct rt_mmcsd_req req;
struct rt_mmcsd_cmd cmd;
struct rt_mmcsd_data data;
*new_ext_csd = RT_NULL;
if (GET_BITS(card->resp_cid, 122, 4) < 4)
return 0;
/*
* As the ext_csd is so large and mostly unused, we don't store the
* raw block in mmc_card.
*/
ext_csd = rt_malloc(512);
if (!ext_csd) {
rt_kprintf("alloc memory failed when get ext csd\n");
return -RT_ENOMEM;
}
rt_memset(&req, 0, sizeof(struct rt_mmcsd_req));
rt_memset(&cmd, 0, sizeof(struct rt_mmcsd_cmd));
rt_memset(&data, 0, sizeof(struct rt_mmcsd_data));
req.cmd = &cmd;
req.data = &data;
cmd.cmd_code = SEND_EXT_CSD;
cmd.arg = 0;
/* NOTE HACK: the RESP_SPI_R1 is always correct here, but we
* rely on callers to never use this with "native" calls for reading
* CSD or CID. Native versions of those commands use the R2 type,
* not R1 plus a data block.
*/
cmd.flags = RESP_SPI_R1 | RESP_R1 | CMD_ADTC;
data.blksize = 512;
data.blks = 1;
data.flags = DATA_DIR_READ;
data.buf = ext_csd;
/*
* Some cards require longer data read timeout than indicated in CSD.
* Address this by setting the read timeout to a "reasonably high"
* value. For the cards tested, 300ms has proven enough. If necessary,
* this value can be increased if other problematic cards require this.
*/
data.timeout_ns = 300000000;
data.timeout_clks = 0;
mmcsd_send_request(card->host, &req);
if (cmd.err)
return cmd.err;
if (data.err)
return data.err;
*new_ext_csd = ext_csd;
return 0;
}
/*
* Decode extended CSD.
*/
static int mmc_parse_ext_csd(struct rt_mmcsd_card *card, rt_uint8_t *ext_csd)
{
card->flags |= CARD_FLAG_HIGHSPEED;
card->hs_max_data_rate = 200000000;
card->card_capacity = *((rt_uint32_t *)&ext_csd[EXT_CSD_SEC_CNT]);
card->card_capacity *= card->card_blksize;
card->card_capacity >>= 10; /* unit:KB */
rt_kprintf("emmc card capacity %d KB\n", card->card_capacity);
return 0;
}
/**
* mmc_switch - modify EXT_CSD register
* @card: the MMC card associated with the data transfer
* @set: cmd set values
* @index: EXT_CSD register index
* @value: value to program into EXT_CSD register
*
* Modifies the EXT_CSD register for selected card.
*/
static int mmc_switch(struct rt_mmcsd_card *card, rt_uint8_t set,
rt_uint8_t index, rt_uint8_t value)
{
int err;
struct rt_mmcsd_host *host = card->host;
struct rt_mmcsd_cmd cmd = {0};
cmd.cmd_code = SWITCH;
cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
(index << 16) | (value << 8) | set;
cmd.flags = RESP_SPI_R1 | RESP_R1 | CMD_AC;
err = mmcsd_send_cmd(host, &cmd, 3);
if (err)
return err;
return 0;
}
static int mmc_compare_ext_csds(struct rt_mmcsd_card *card,
rt_uint8_t *ext_csd, rt_uint32_t bus_width)
{
rt_uint8_t *bw_ext_csd;
int err;
if (bus_width == MMCSD_BUS_WIDTH_1)
return 0;
err = mmc_get_ext_csd(card, &bw_ext_csd);
if (err || bw_ext_csd == RT_NULL) {
err = -RT_ERROR;
goto out;
}
/* only compare read only fields */
err = !((ext_csd[EXT_CSD_PARTITION_SUPPORT] == bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) &&
(ext_csd[EXT_CSD_ERASED_MEM_CONT] == bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) &&
(ext_csd[EXT_CSD_REV] == bw_ext_csd[EXT_CSD_REV]) &&
(ext_csd[EXT_CSD_STRUCTURE] == bw_ext_csd[EXT_CSD_STRUCTURE]) &&
(ext_csd[EXT_CSD_CARD_TYPE] == bw_ext_csd[EXT_CSD_CARD_TYPE]) &&
(ext_csd[EXT_CSD_S_A_TIMEOUT] == bw_ext_csd[EXT_CSD_S_A_TIMEOUT]) &&
(ext_csd[EXT_CSD_HC_WP_GRP_SIZE] == bw_ext_csd[EXT_CSD_HC_WP_GRP_SIZE]) &&
(ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT] == bw_ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]) &&
(ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] == bw_ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]) &&
(ext_csd[EXT_CSD_SEC_TRIM_MULT] == bw_ext_csd[EXT_CSD_SEC_TRIM_MULT]) &&
(ext_csd[EXT_CSD_SEC_ERASE_MULT] == bw_ext_csd[EXT_CSD_SEC_ERASE_MULT]) &&
(ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT] == bw_ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) &&
(ext_csd[EXT_CSD_TRIM_MULT] == bw_ext_csd[EXT_CSD_TRIM_MULT]) &&
(ext_csd[EXT_CSD_SEC_CNT + 0] == bw_ext_csd[EXT_CSD_SEC_CNT + 0]) &&
(ext_csd[EXT_CSD_SEC_CNT + 1] == bw_ext_csd[EXT_CSD_SEC_CNT + 1]) &&
(ext_csd[EXT_CSD_SEC_CNT + 2] == bw_ext_csd[EXT_CSD_SEC_CNT + 2]) &&
(ext_csd[EXT_CSD_SEC_CNT + 3] == bw_ext_csd[EXT_CSD_SEC_CNT + 3]) &&
(ext_csd[EXT_CSD_PWR_CL_52_195] == bw_ext_csd[EXT_CSD_PWR_CL_52_195]) &&
(ext_csd[EXT_CSD_PWR_CL_26_195] == bw_ext_csd[EXT_CSD_PWR_CL_26_195]) &&
(ext_csd[EXT_CSD_PWR_CL_52_360] == bw_ext_csd[EXT_CSD_PWR_CL_52_360]) &&
(ext_csd[EXT_CSD_PWR_CL_26_360] == bw_ext_csd[EXT_CSD_PWR_CL_26_360]) &&
(ext_csd[EXT_CSD_PWR_CL_200_195] == bw_ext_csd[EXT_CSD_PWR_CL_200_195]) &&
(ext_csd[EXT_CSD_PWR_CL_200_360] == bw_ext_csd[EXT_CSD_PWR_CL_200_360]) &&
(ext_csd[EXT_CSD_PWR_CL_DDR_52_195] == bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_195]) &&
(ext_csd[EXT_CSD_PWR_CL_DDR_52_360] == bw_ext_csd[EXT_CSD_PWR_CL_DDR_52_360]) &&
(ext_csd[EXT_CSD_PWR_CL_DDR_200_360] == bw_ext_csd[EXT_CSD_PWR_CL_DDR_200_360]));
if (err)
err = -RT_ERROR;
out:
rt_free(bw_ext_csd);
return err;
}
/*
* Select the bus width amoung 4-bit and 8-bit(SDR).
* If the bus width is changed successfully, return the selected width value.
* Zero is returned instead of error value if the wide width is not supported.
*/
static int mmc_select_bus_width(struct rt_mmcsd_card *card, rt_uint8_t *ext_csd)
{
rt_uint32_t ext_csd_bits[] = {
EXT_CSD_BUS_WIDTH_8,
EXT_CSD_BUS_WIDTH_4,
EXT_CSD_BUS_WIDTH_1
};
rt_uint32_t bus_widths[] = {
MMCSD_BUS_WIDTH_8,
MMCSD_BUS_WIDTH_4,
MMCSD_BUS_WIDTH_1
};
struct rt_mmcsd_host *host = card->host;
unsigned idx, bus_width = 0;
int err = 0;
if (GET_BITS(card->resp_cid, 122, 4) < 4)
return 0;
/*
* Unlike SD, MMC cards dont have a configuration register to notify
* supported bus width. So bus test command should be run to identify
* the supported bus width or compare the ext csd values of current
* bus width and ext csd values of 1 bit mode read earlier.
*/
for (idx = 0; idx < sizeof(bus_widths)/sizeof(rt_uint32_t); idx++) {
/*
* Host is capable of 8bit transfer, then switch
* the device to work in 8bit transfer mode. If the
* mmc switch command returns error then switch to
* 4bit transfer mode. On success set the corresponding
* bus width on the host.
*/
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
ext_csd_bits[idx]);
if (err)
continue;
bus_width = bus_widths[idx];
mmcsd_set_bus_width(host, bus_width);
mmcsd_delay_ms(20); //delay 10ms
err = mmc_compare_ext_csds(card, ext_csd, bus_width);
if (!err) {
err = bus_width;
break;
} else {
switch(ext_csd_bits[idx]){
case 0:
rt_kprintf("switch to bus width 1 bit failed\n");
break;
case 1:
rt_kprintf("switch to bus width 4 bit failed\n");
break;
case 2:
rt_kprintf("switch to bus width 8 bit failed\n");
break;
default:
break;
}
}
}
return err;
}
rt_err_t mmc_send_op_cond(struct rt_mmcsd_host *host,
rt_uint32_t ocr, rt_uint32_t *rocr)
{
struct rt_mmcsd_cmd cmd;
rt_uint32_t i;
rt_err_t err = RT_EOK;
rt_memset(&cmd, 0, sizeof(struct rt_mmcsd_cmd));
cmd.cmd_code = SEND_OP_COND;
cmd.arg = controller_is_spi(host) ? 0 : ocr;
cmd.flags = RESP_SPI_R1 | RESP_R3 | CMD_BCR;
for (i = 100; i; i--) {
err = mmcsd_send_cmd(host, &cmd, 3);
if (err)
break;
/* if we're just probing, do a single pass */
if (ocr == 0)
break;
/* otherwise wait until reset completes */
if (controller_is_spi(host)) {
if (!(cmd.resp[0] & R1_SPI_IDLE))
break;
} else {
if (cmd.resp[0] & CARD_BUSY)
break;
}
err = -RT_ETIMEOUT;
mmcsd_delay_ms(10); //delay 10ms
}
if (rocr && !controller_is_spi(host))
*rocr = cmd.resp[0];
return err;
}
static rt_err_t mmc_set_card_addr(struct rt_mmcsd_host *host, rt_uint32_t rca)
{
rt_err_t err;
struct rt_mmcsd_cmd cmd;
rt_memset(&cmd, 0, sizeof(struct rt_mmcsd_cmd));
cmd.cmd_code = SET_RELATIVE_ADDR;
cmd.arg = rca << 16;
cmd.flags = RESP_R1 | CMD_AC;
err = mmcsd_send_cmd(host, &cmd, 3);
if (err)
return err;
return 0;
}
static rt_int32_t mmcsd_mmc_init_card(struct rt_mmcsd_host *host,
rt_uint32_t ocr)
{
struct rt_mmcsd_card *card;
rt_int32_t err;
rt_uint32_t resp[4];
rt_uint32_t rocr;
rt_uint32_t max_data_rate;
rt_uint8_t *ext_csd = RT_NULL;
mmcsd_go_idle(host);
/* The extra bit indicates that we support high capacity */
err = mmc_send_op_cond(host, ocr | (1 << 30), &rocr);
if (err)
goto err;
if (controller_is_spi(host))
{
err = mmcsd_spi_use_crc(host, 1);
if (err)
goto err1;
}
if (controller_is_spi(host))
err = mmcsd_get_cid(host, resp);
else
err = mmcsd_all_get_cid(host, resp);
if (err)
goto err;
card = rt_malloc(sizeof(struct rt_mmcsd_card));
if (!card)
{
rt_kprintf("malloc card failed\n");
err = -RT_ENOMEM;
goto err;
}
rt_memset(card, 0, sizeof(struct rt_mmcsd_card));
card->card_type = CARD_TYPE_MMC;
card->host = host;
card->rca = 1;
rt_memcpy(card->resp_cid, resp, sizeof(card->resp_cid));
/*
* For native busses: get card RCA and quit open drain mode.
*/
if (!controller_is_spi(host))
{
err = mmc_set_card_addr(host, card->rca);
if (err)
goto err1;
mmcsd_set_bus_mode(host, MMCSD_BUSMODE_PUSHPULL);
}
err = mmcsd_get_csd(card, card->resp_csd);
if (err)
goto err1;
err = mmcsd_parse_csd(card);
if (err)
goto err1;
if (!controller_is_spi(host))
{
err = mmcsd_select_card(card);
if (err)
goto err1;
}
/*
* Fetch and process extended CSD.
*/
err = mmc_get_ext_csd(card, &ext_csd);
if (err)
goto err1;
err = mmc_parse_ext_csd(card, ext_csd);
if (err)
goto err1;
/* If doing byte addressing, check if required to do sector
* addressing. Handle the case of <2GB cards needing sector
* addressing. See section 8.1 JEDEC Standard JED84-A441;
* ocr register has bit 30 set for sector addressing.
*/
if (!(card->flags & CARD_FLAG_SDHC) && (rocr & (1<<30)))
card->flags |= CARD_FLAG_SDHC;
/* set bus speed */
max_data_rate = (unsigned int)-1;
if (card->flags & CARD_FLAG_HIGHSPEED)
{
if (max_data_rate > card->hs_max_data_rate)
max_data_rate = card->hs_max_data_rate;
}
else if (max_data_rate > card->max_data_rate)
{
max_data_rate = card->max_data_rate;
}
mmcsd_set_clock(host, max_data_rate);
/*switch bus width*/
mmc_select_bus_width(card, ext_csd);
host->card = card;
rt_free(ext_csd);
return 0;
err1:
rt_free(card);
err:
return err;
}
/*
* Starting point for mmc card init.
*/
rt_int32_t init_mmc(struct rt_mmcsd_host *host, rt_uint32_t ocr)
{
rt_int32_t err;
rt_uint32_t current_ocr;
/*
* We need to get OCR a different way for SPI.
*/
if (controller_is_spi(host))
{
err = mmcsd_spi_read_ocr(host, 0, &ocr);
if (err)
goto err;
}
current_ocr = mmcsd_select_voltage(host, ocr);
/*
* Can we support the voltage(s) of the card(s)?
*/
if (!current_ocr)
{
err = -RT_ERROR;
goto err;
}
/*
* Detect and init the card.
*/
err = mmcsd_mmc_init_card(host, current_ocr);
if (err)
goto err;
mmcsd_host_unlock(host);
err = rt_mmcsd_blk_probe(host->card);
if (err)
goto remove_card;
mmcsd_host_lock(host);
return 0;
remove_card:
mmcsd_host_lock(host);
rt_mmcsd_blk_remove(host->card);
rt_free(host->card);
host->card = RT_NULL;
err:
rt_kprintf("init SD card failed\n");
return err;
}
......@@ -25,6 +25,7 @@
#include <rtthread.h>
#include <drivers/mmcsd_core.h>
#include <drivers/sd.h>
#include <drivers/mmc.h>
#ifndef RT_MMCSD_STACK_SIZE
#define RT_MMCSD_STACK_SIZE 1024
......@@ -60,22 +61,29 @@ void mmcsd_req_complete(struct rt_mmcsd_host *host)
void mmcsd_send_request(struct rt_mmcsd_host *host, struct rt_mmcsd_req *req)
{
req->cmd->err = 0;
req->cmd->mrq = req;
if (req->data)
{
req->cmd->data = req->data;
req->data->err = 0;
req->data->mrq = req;
if (req->stop)
{
req->data->stop = req->stop;
req->stop->err = 0;
req->stop->mrq = req;
}
}
host->ops->request(host, req);
rt_sem_take(&host->sem_ack, RT_WAITING_FOREVER);
do {
req->cmd->retries--;
req->cmd->err = 0;
req->cmd->mrq = req;
if (req->data)
{
req->cmd->data = req->data;
req->data->err = 0;
req->data->mrq = req;
if (req->stop)
{
req->data->stop = req->stop;
req->stop->err = 0;
req->stop->mrq = req;
}
}
host->ops->request(host, req);
rt_sem_take(&host->sem_ack, RT_WAITING_FOREVER);
} while(req->cmd->err && req->cmd->retries);
}
rt_int32_t mmcsd_send_cmd(struct rt_mmcsd_host *host,
......@@ -86,6 +94,7 @@ rt_int32_t mmcsd_send_cmd(struct rt_mmcsd_host *host,
rt_memset(&req, 0, sizeof(struct rt_mmcsd_req));
rt_memset(cmd->resp, 0, sizeof(cmd->resp));
cmd->retries = retries;
req.cmd = cmd;
cmd->data = RT_NULL;
......@@ -626,6 +635,18 @@ void mmcsd_detect(void *param)
mmcsd_host_unlock(host);
continue;
}
/*
* detect mmc card
*/
err = mmc_send_op_cond(host, 0, &ocr);
if (!err)
{
if (init_mmc(host, ocr))
mmcsd_power_off(host);
mmcsd_host_unlock(host);
continue;
}
mmcsd_host_unlock(host);
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册