Skip to content

R
rt-thread

2301_76519099 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 3
Star 1
Fork 1
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 09d18dcc 编写于 作者: W wangqiang
浏览文件
操作

去掉DSP_Lib，暂时不用

上级 68374821
展开全部 隐藏空白更改
内联 并排
Showing with 0 addition and 296215 deletion
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_class_marks_example/Abstract.txt 已删除 100644 → 0
浏览文件 @ 68374821
CMSIS DSP_Lib example arm_class_marks_example for
Cortex-M0, Cortex-M3, Cortex-M4 with FPU and Cortex-M7 with single precision FPU.
The example is configured for uVision Simulator
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM0/startup_ARMCM0.s 已删除 100644 → 0
浏览文件 @ 68374821
;/**************************************************************************//**
; * @file startup_ARMCM0.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM0 Device Series
; * @version V5.00
; * @date 02. March 2016
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;/*
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;*/
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000C00
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WDT_IRQHandler ; 0: Watchdog Timer
DCD RTC_IRQHandler ; 1: Real Time Clock
DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
DCD MCIA_IRQHandler ; 4: MCIa
DCD MCIB_IRQHandler ; 5: MCIb
DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
DCD UART4_IRQHandler ; 9: UART4 - not connected
DCD AACI_IRQHandler ; 10: AACI / AC97
DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
DCD ENET_IRQHandler ; 12: Ethernet
DCD USBDC_IRQHandler ; 13: USB Device
DCD USBHC_IRQHandler ; 14: USB Host Controller
DCD CHLCD_IRQHandler ; 15: Character LCD
DCD FLEXRAY_IRQHandler ; 16: Flexray
DCD CAN_IRQHandler ; 17: CAN
DCD LIN_IRQHandler ; 18: LIN
DCD I2C_IRQHandler ; 19: I2C ADC/DAC
DCD 0 ; 20: Reserved
DCD 0 ; 21: Reserved
DCD 0 ; 22: Reserved
DCD 0 ; 23: Reserved
DCD 0 ; 24: Reserved
DCD 0 ; 25: Reserved
DCD 0 ; 26: Reserved
DCD 0 ; 27: Reserved
DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
DCD 0 ; 29: Reserved - CPU FPGA
DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WDT_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT TIM0_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT MCIA_IRQHandler [WEAK]
EXPORT MCIB_IRQHandler [WEAK]
EXPORT UART0_IRQHandler [WEAK]
EXPORT UART1_IRQHandler [WEAK]
EXPORT UART2_IRQHandler [WEAK]
EXPORT UART3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT AACI_IRQHandler [WEAK]
EXPORT CLCD_IRQHandler [WEAK]
EXPORT ENET_IRQHandler [WEAK]
EXPORT USBDC_IRQHandler [WEAK]
EXPORT USBHC_IRQHandler [WEAK]
EXPORT CHLCD_IRQHandler [WEAK]
EXPORT FLEXRAY_IRQHandler [WEAK]
EXPORT CAN_IRQHandler [WEAK]
EXPORT LIN_IRQHandler [WEAK]
EXPORT I2C_IRQHandler [WEAK]
EXPORT CPU_CLCD_IRQHandler [WEAK]
EXPORT SPI_IRQHandler [WEAK]
WDT_IRQHandler
RTC_IRQHandler
TIM0_IRQHandler
TIM2_IRQHandler
MCIA_IRQHandler
MCIB_IRQHandler
UART0_IRQHandler
UART1_IRQHandler
UART2_IRQHandler
UART3_IRQHandler
UART4_IRQHandler
AACI_IRQHandler
CLCD_IRQHandler
ENET_IRQHandler
USBDC_IRQHandler
USBHC_IRQHandler
CHLCD_IRQHandler
FLEXRAY_IRQHandler
CAN_IRQHandler
LIN_IRQHandler
I2C_IRQHandler
CPU_CLCD_IRQHandler
SPI_IRQHandler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap PROC
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ENDP
ALIGN
ENDIF
END
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM0/system_ARMCM0.c 已删除 100644 → 0
浏览文件 @ 68374821
/**************************************************************************//**
* @file system_ARMCM0.c
* @brief CMSIS Device System Source File for
* ARMCM0 Device Series
* @version V5.00
* @date 08. April 2016
******************************************************************************/
/*
* Copyright (c) 2009-2016 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "ARMCM0.h"
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL ( 5000000U) /* Oscillator frequency */
#define SYSTEM_CLOCK (5 * XTAL)
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK;
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM3/startup_ARMCM3.s 已删除 100644 → 0
浏览文件 @ 68374821
;/**************************************************************************//**
; * @file startup_ARMCM3.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM3 Device Series
; * @version V5.00
; * @date 02. March 2016
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;/*
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;*/
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000C00
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WDT_IRQHandler ; 0: Watchdog Timer
DCD RTC_IRQHandler ; 1: Real Time Clock
DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
DCD MCIA_IRQHandler ; 4: MCIa
DCD MCIB_IRQHandler ; 5: MCIb
DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
DCD UART4_IRQHandler ; 9: UART4 - not connected
DCD AACI_IRQHandler ; 10: AACI / AC97
DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
DCD ENET_IRQHandler ; 12: Ethernet
DCD USBDC_IRQHandler ; 13: USB Device
DCD USBHC_IRQHandler ; 14: USB Host Controller
DCD CHLCD_IRQHandler ; 15: Character LCD
DCD FLEXRAY_IRQHandler ; 16: Flexray
DCD CAN_IRQHandler ; 17: CAN
DCD LIN_IRQHandler ; 18: LIN
DCD I2C_IRQHandler ; 19: I2C ADC/DAC
DCD 0 ; 20: Reserved
DCD 0 ; 21: Reserved
DCD 0 ; 22: Reserved
DCD 0 ; 23: Reserved
DCD 0 ; 24: Reserved
DCD 0 ; 25: Reserved
DCD 0 ; 26: Reserved
DCD 0 ; 27: Reserved
DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
DCD 0 ; 29: Reserved - CPU FPGA
DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WDT_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT TIM0_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT MCIA_IRQHandler [WEAK]
EXPORT MCIB_IRQHandler [WEAK]
EXPORT UART0_IRQHandler [WEAK]
EXPORT UART1_IRQHandler [WEAK]
EXPORT UART2_IRQHandler [WEAK]
EXPORT UART3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT AACI_IRQHandler [WEAK]
EXPORT CLCD_IRQHandler [WEAK]
EXPORT ENET_IRQHandler [WEAK]
EXPORT USBDC_IRQHandler [WEAK]
EXPORT USBHC_IRQHandler [WEAK]
EXPORT CHLCD_IRQHandler [WEAK]
EXPORT FLEXRAY_IRQHandler [WEAK]
EXPORT CAN_IRQHandler [WEAK]
EXPORT LIN_IRQHandler [WEAK]
EXPORT I2C_IRQHandler [WEAK]
EXPORT CPU_CLCD_IRQHandler [WEAK]
EXPORT SPI_IRQHandler [WEAK]
WDT_IRQHandler
RTC_IRQHandler
TIM0_IRQHandler
TIM2_IRQHandler
MCIA_IRQHandler
MCIB_IRQHandler
UART0_IRQHandler
UART1_IRQHandler
UART2_IRQHandler
UART3_IRQHandler
UART4_IRQHandler
AACI_IRQHandler
CLCD_IRQHandler
ENET_IRQHandler
USBDC_IRQHandler
USBHC_IRQHandler
CHLCD_IRQHandler
FLEXRAY_IRQHandler
CAN_IRQHandler
LIN_IRQHandler
I2C_IRQHandler
CPU_CLCD_IRQHandler
SPI_IRQHandler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap PROC
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ENDP
ALIGN
ENDIF
END
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM3/system_ARMCM3.c 已删除 100644 → 0
浏览文件 @ 68374821
/**************************************************************************//**
* @file system_ARMCM3.c
* @brief CMSIS Device System Source File for
* ARMCM3 Device Series
* @version V5.00
* @date 08. April 2016
******************************************************************************/
/*
* Copyright (c) 2009-2016 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "ARMCM3.h"
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL ( 5000000U) /* Oscillator frequency */
#define SYSTEM_CLOCK (5 * XTAL)
/*----------------------------------------------------------------------------
Externals
*----------------------------------------------------------------------------*/
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
extern uint32_t __Vectors;
#endif
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK;
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
SCB->VTOR = (uint32_t) &__Vectors;
#endif
SystemCoreClock = SYSTEM_CLOCK;
}
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM4_FP/startup_ARMCM4.s 已删除 100644 → 0
浏览文件 @ 68374821
;/**************************************************************************//**
; * @file startup_ARMCM4.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM4 Device Series
; * @version V5.00
; * @date 02. March 2016
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;/*
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;*/
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000C00
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WDT_IRQHandler ; 0: Watchdog Timer
DCD RTC_IRQHandler ; 1: Real Time Clock
DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
DCD MCIA_IRQHandler ; 4: MCIa
DCD MCIB_IRQHandler ; 5: MCIb
DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
DCD UART4_IRQHandler ; 9: UART4 - not connected
DCD AACI_IRQHandler ; 10: AACI / AC97
DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
DCD ENET_IRQHandler ; 12: Ethernet
DCD USBDC_IRQHandler ; 13: USB Device
DCD USBHC_IRQHandler ; 14: USB Host Controller
DCD CHLCD_IRQHandler ; 15: Character LCD
DCD FLEXRAY_IRQHandler ; 16: Flexray
DCD CAN_IRQHandler ; 17: CAN
DCD LIN_IRQHandler ; 18: LIN
DCD I2C_IRQHandler ; 19: I2C ADC/DAC
DCD 0 ; 20: Reserved
DCD 0 ; 21: Reserved
DCD 0 ; 22: Reserved
DCD 0 ; 23: Reserved
DCD 0 ; 24: Reserved
DCD 0 ; 25: Reserved
DCD 0 ; 26: Reserved
DCD 0 ; 27: Reserved
DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
DCD 0 ; 29: Reserved - CPU FPGA
DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WDT_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT TIM0_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT MCIA_IRQHandler [WEAK]
EXPORT MCIB_IRQHandler [WEAK]
EXPORT UART0_IRQHandler [WEAK]
EXPORT UART1_IRQHandler [WEAK]
EXPORT UART2_IRQHandler [WEAK]
EXPORT UART3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT AACI_IRQHandler [WEAK]
EXPORT CLCD_IRQHandler [WEAK]
EXPORT ENET_IRQHandler [WEAK]
EXPORT USBDC_IRQHandler [WEAK]
EXPORT USBHC_IRQHandler [WEAK]
EXPORT CHLCD_IRQHandler [WEAK]
EXPORT FLEXRAY_IRQHandler [WEAK]
EXPORT CAN_IRQHandler [WEAK]
EXPORT LIN_IRQHandler [WEAK]
EXPORT I2C_IRQHandler [WEAK]
EXPORT CPU_CLCD_IRQHandler [WEAK]
EXPORT SPI_IRQHandler [WEAK]
WDT_IRQHandler
RTC_IRQHandler
TIM0_IRQHandler
TIM2_IRQHandler
MCIA_IRQHandler
MCIB_IRQHandler
UART0_IRQHandler
UART1_IRQHandler
UART2_IRQHandler
UART3_IRQHandler
UART4_IRQHandler
AACI_IRQHandler
CLCD_IRQHandler
ENET_IRQHandler
USBDC_IRQHandler
USBHC_IRQHandler
CHLCD_IRQHandler
FLEXRAY_IRQHandler
CAN_IRQHandler
LIN_IRQHandler
I2C_IRQHandler
CPU_CLCD_IRQHandler
SPI_IRQHandler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap PROC
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ENDP
ALIGN
ENDIF
END
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM4_FP/system_ARMCM4.c 已删除 100644 → 0
浏览文件 @ 68374821
/**************************************************************************//**
* @file system_ARMCM4.c
* @brief CMSIS Device System Source File for
* ARMCM4 Device Series
* @version V5.00
* @date 08. April 2016
******************************************************************************/
/*
* Copyright (c) 2009-2016 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined (ARMCM4)
#include "ARMCM4.h"
#elif defined (ARMCM4_FP)
#include "ARMCM4_FP.h"
#else
#error device not specified!
#endif
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL ( 5000000U) /* Oscillator frequency */
#define SYSTEM_CLOCK (5 * XTAL)
/*----------------------------------------------------------------------------
Externals
*----------------------------------------------------------------------------*/
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
extern uint32_t __Vectors;
#endif
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK;
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
SCB->VTOR = (uint32_t) &__Vectors;
#endif
#if defined (__FPU_USED) && (__FPU_USED == 1)
SCB->CPACR |= ((3U << 10*2) | /* set CP10 Full Access */
(3U << 11*2) ); /* set CP11 Full Access */
#endif
#ifdef UNALIGNED_SUPPORT_DISABLE
SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
#endif
SystemCoreClock = SYSTEM_CLOCK;
}
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM7_SP/startup_ARMCM7.s 已删除 100644 → 0
浏览文件 @ 68374821
;/**************************************************************************//**
; * @file startup_ARMCM7.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM7 Device Series
; * @version V5.00
; * @date 02. March 2016
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;/*
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;*/
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000C00
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WDT_IRQHandler ; 0: Watchdog Timer
DCD RTC_IRQHandler ; 1: Real Time Clock
DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
DCD MCIA_IRQHandler ; 4: MCIa
DCD MCIB_IRQHandler ; 5: MCIb
DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
DCD UART4_IRQHandler ; 9: UART4 - not connected
DCD AACI_IRQHandler ; 10: AACI / AC97
DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
DCD ENET_IRQHandler ; 12: Ethernet
DCD USBDC_IRQHandler ; 13: USB Device
DCD USBHC_IRQHandler ; 14: USB Host Controller
DCD CHLCD_IRQHandler ; 15: Character LCD
DCD FLEXRAY_IRQHandler ; 16: Flexray
DCD CAN_IRQHandler ; 17: CAN
DCD LIN_IRQHandler ; 18: LIN
DCD I2C_IRQHandler ; 19: I2C ADC/DAC
DCD 0 ; 20: Reserved
DCD 0 ; 21: Reserved
DCD 0 ; 22: Reserved
DCD 0 ; 23: Reserved
DCD 0 ; 24: Reserved
DCD 0 ; 25: Reserved
DCD 0 ; 26: Reserved
DCD 0 ; 27: Reserved
DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
DCD 0 ; 29: Reserved - CPU FPGA
DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WDT_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT TIM0_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT MCIA_IRQHandler [WEAK]
EXPORT MCIB_IRQHandler [WEAK]
EXPORT UART0_IRQHandler [WEAK]
EXPORT UART1_IRQHandler [WEAK]
EXPORT UART2_IRQHandler [WEAK]
EXPORT UART3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT AACI_IRQHandler [WEAK]
EXPORT CLCD_IRQHandler [WEAK]
EXPORT ENET_IRQHandler [WEAK]
EXPORT USBDC_IRQHandler [WEAK]
EXPORT USBHC_IRQHandler [WEAK]
EXPORT CHLCD_IRQHandler [WEAK]
EXPORT FLEXRAY_IRQHandler [WEAK]
EXPORT CAN_IRQHandler [WEAK]
EXPORT LIN_IRQHandler [WEAK]
EXPORT I2C_IRQHandler [WEAK]
EXPORT CPU_CLCD_IRQHandler [WEAK]
EXPORT SPI_IRQHandler [WEAK]
WDT_IRQHandler
RTC_IRQHandler
TIM0_IRQHandler
TIM2_IRQHandler
MCIA_IRQHandler
MCIB_IRQHandler
UART0_IRQHandler
UART1_IRQHandler
UART2_IRQHandler
UART3_IRQHandler
UART4_IRQHandler
AACI_IRQHandler
CLCD_IRQHandler
ENET_IRQHandler
USBDC_IRQHandler
USBHC_IRQHandler
CHLCD_IRQHandler
FLEXRAY_IRQHandler
CAN_IRQHandler
LIN_IRQHandler
I2C_IRQHandler
CPU_CLCD_IRQHandler
SPI_IRQHandler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap PROC
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ENDP
ALIGN
ENDIF
END
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_class_marks_example/RTE/Device/ARMCM7_SP/system_ARMCM7.c 已删除 100644 → 0
浏览文件 @ 68374821
/**************************************************************************//**
* @file system_ARMCM7.c
* @brief CMSIS Device System Source File for
* ARMCM7 Device Series
* @version V5.00
* @date 08. April 2016
******************************************************************************/
/*
* Copyright (c) 2009-2016 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#if defined (ARMCM7)
#include "ARMCM7.h"
#elif defined (ARMCM7_SP)
#include "ARMCM7_SP.h"
#elif defined (ARMCM7_DP)
#include "ARMCM7_DP.h"
#else
#error device not specified!
#endif
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL ( 5000000U) /* Oscillator frequency */
#define SYSTEM_CLOCK (5 * XTAL)
/*----------------------------------------------------------------------------
Externals
*----------------------------------------------------------------------------*/
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
extern uint32_t __Vectors;
#endif
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK;
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
SCB->VTOR = (uint32_t) &__Vectors;
#endif
#if defined (__FPU_USED) && (__FPU_USED == 1)
SCB->CPACR |= ((3U << 10*2) | /* set CP10 Full Access */
(3U << 11*2) ); /* set CP11 Full Access */
#endif
#ifdef UNALIGNED_SUPPORT_DISABLE
SCB->CCR |= SCB_CCR_UNALIGN_TRP_Msk;
#endif
SystemCoreClock = SYSTEM_CLOCK;
}
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_class_marks_example/RTE/RTE_Components.h 已删除 100644 → 0
浏览文件 @ 68374821
/*
* Auto generated Run-Time-Environment Component Configuration File
* *** Do not modify ! ***
*
* Project: 'arm_class_marks_example'
* Target: 'ARMCM0'
*/
#ifndef RTE_COMPONENTS_H
#define RTE_COMPONENTS_H
/*
* Define the Device Header File:
*/
#define CMSIS_device_header "ARMCM0.h"
#endif /* RTE_COMPONENTS_H */
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_class_marks_example/arm_class_marks_example.ini 已删除 100644 → 0
浏览文件 @ 68374821
/* This file demonstrates how to Map memory ranges, specify read, write, and execute permissions
The file can be executed in the following way:
1) manually from uVision command window (in debug mode) using command:
INCLUIDE arm_class_marks_example.ini
*/
// usual initialisation for target setup
MAP 0x00000000, 0x0003FFFF EXEC READ // 256K Flash
MAP 0x20000000, 0x20007FFF READ WRITE // 32K RAM
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_class_marks_example/arm_class_marks_example_f32.c 已删除 100644 → 0
浏览文件 @ 68374821
/* ----------------------------------------------------------------------
* Copyright (C) 2010-2012 ARM Limited. All rights reserved.
*
* $Date: 17. January 2013
* $Revision: V1.4.0
*
* Project: CMSIS DSP Library
* Title: arm_class_marks_example_f32.c
*
* Description: Example code to calculate Minimum, Maximum
* Mean, std and variance of marks obtained in a class
*
* Target Processor: Cortex-M4/Cortex-M3
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of ARM LIMITED nor the names of its contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
* -------------------------------------------------------------------- */
/**
* @ingroup groupExamples
*/
/**
* @defgroup ClassMarks Class Marks Example
*
* \par Description:
* \par
* Demonstrates the use the Maximum, Minimum, Mean, Standard Deviation, Variance
* and Matrix functions to calculate statistical values of marks obtained in a class.
*
* \note This example also demonstrates the usage of static initialization.
*
* \par Variables Description:
* \par
* \li \c testMarks_f32 points to the marks scored by 20 students in 4 subjects
* \li \c max_marks Maximum of all marks
* \li \c min_marks Minimum of all marks
* \li \c mean Mean of all marks
* \li \c var Variance of the marks
* \li \c std Standard deviation of the marks
* \li \c numStudents Total number of students in the class
*
* \par CMSIS DSP Software Library Functions Used:
* \par
* - arm_mat_init_f32()
* - arm_mat_mult_f32()
* - arm_max_f32()
* - arm_min_f32()
* - arm_mean_f32()
* - arm_std_f32()
* - arm_var_f32()
*
* <b> Refer </b>
* \link arm_class_marks_example_f32.c \endlink
*
*/
/** \example arm_class_marks_example_f32.c
*/
#include "arm_math.h"
#define USE_STATIC_INIT
/* ----------------------------------------------------------------------
** Global defines
** ------------------------------------------------------------------- */
#define TEST_LENGTH_SAMPLES (20*4)
/* ----------------------------------------------------------------------
** List of Marks scored by 20 students for 4 subjects
** ------------------------------------------------------------------- */
const float32_t testMarks_f32[TEST_LENGTH_SAMPLES] =
{
42.000000, 37.000000, 81.000000, 28.000000,
83.000000, 72.000000, 36.000000, 38.000000,
32.000000, 51.000000, 63.000000, 64.000000,
97.000000, 82.000000, 95.000000, 90.000000,
66.000000, 51.000000, 54.000000, 42.000000,
67.000000, 56.000000, 45.000000, 57.000000,
67.000000, 69.000000, 35.000000, 52.000000,
29.000000, 81.000000, 58.000000, 47.000000,
38.000000, 76.000000, 100.000000, 29.000000,
33.000000, 47.000000, 29.000000, 50.000000,
34.000000, 41.000000, 61.000000, 46.000000,
52.000000, 50.000000, 48.000000, 36.000000,
47.000000, 55.000000, 44.000000, 40.000000,
100.000000, 94.000000, 84.000000, 37.000000,
32.000000, 71.000000, 47.000000, 77.000000,
31.000000, 50.000000, 49.000000, 35.000000,
63.000000, 67.000000, 40.000000, 31.000000,
29.000000, 68.000000, 61.000000, 38.000000,
31.000000, 28.000000, 28.000000, 76.000000,
55.000000, 33.000000, 29.000000, 39.000000
};
/* ----------------------------------------------------------------------
* Number of subjects X 1
* ------------------------------------------------------------------- */
const float32_t testUnity_f32[4] =
{
1.000, 1.000, 1.000, 1.000
};
/* ----------------------------------------------------------------------
** f32 Output buffer
** ------------------------------------------------------------------- */
static float32_t testOutput[TEST_LENGTH_SAMPLES];
/* ------------------------------------------------------------------
* Global defines
*------------------------------------------------------------------- */
#define NUMSTUDENTS 20
#define NUMSUBJECTS 4
/* ------------------------------------------------------------------
* Global variables
*------------------------------------------------------------------- */
uint32_t numStudents = 20;
uint32_t numSubjects = 4;
float32_t max_marks, min_marks, mean, std, var;
uint32_t student_num;
/* ----------------------------------------------------------------------------------
* Main f32 test function. It returns maximum marks secured and student number
* ------------------------------------------------------------------------------- */
int32_t main()
{
#ifndef USE_STATIC_INIT
arm_matrix_instance_f32 srcA;
arm_matrix_instance_f32 srcB;
arm_matrix_instance_f32 dstC;
/* Input and output matrices initializations */
arm_mat_init_f32(&srcA, numStudents, numSubjects, (float32_t *)testMarks_f32);
arm_mat_init_f32(&srcB, numSubjects, 1, (float32_t *)testUnity_f32);
arm_mat_init_f32(&dstC, numStudents, 1, testOutput);
#else
/* Static Initializations of Input and output matrix sizes and array */
arm_matrix_instance_f32 srcA = {NUMSTUDENTS, NUMSUBJECTS, (float32_t *)testMarks_f32};
arm_matrix_instance_f32 srcB = {NUMSUBJECTS, 1, (float32_t *)testUnity_f32};
arm_matrix_instance_f32 dstC = {NUMSTUDENTS, 1, testOutput};
#endif
/* ----------------------------------------------------------------------
*Call the Matrix multiplication process function
* ------------------------------------------------------------------- */
arm_mat_mult_f32(&srcA, &srcB, &dstC);
/* ----------------------------------------------------------------------
** Call the Max function to calculate max marks among numStudents
** ------------------------------------------------------------------- */
arm_max_f32(testOutput, numStudents, &max_marks, &student_num);
/* ----------------------------------------------------------------------
** Call the Min function to calculate min marks among numStudents
** ------------------------------------------------------------------- */
arm_min_f32(testOutput, numStudents, &min_marks, &student_num);
/* ----------------------------------------------------------------------
** Call the Mean function to calculate mean
** ------------------------------------------------------------------- */
arm_mean_f32(testOutput, numStudents, &mean);
/* ----------------------------------------------------------------------
** Call the std function to calculate standard deviation
** ------------------------------------------------------------------- */
arm_std_f32(testOutput, numStudents, &std);
/* ----------------------------------------------------------------------
** Call the var function to calculate variance
** ------------------------------------------------------------------- */
arm_var_f32(testOutput, numStudents, &var);
while (1); /* main function does not return */
}
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_convolution_example/Abstract.txt 已删除 100644 → 0
浏览文件 @ 68374821
CMSIS DSP_Lib example arm_convolution_example for
Cortex-M0, Cortex-M3, Cortex-M4 with FPU and Cortex-M7 with single precision FPU.
The example is configured for uVision Simulator.
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_convolution_example/RTE/Device/ARMCM0/startup_ARMCM0.s 已删除 100644 → 0
浏览文件 @ 68374821
;/**************************************************************************//**
; * @file startup_ARMCM0.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM0 Device Series
; * @version V5.00
; * @date 02. March 2016
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;/*
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;*/
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000C00
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WDT_IRQHandler ; 0: Watchdog Timer
DCD RTC_IRQHandler ; 1: Real Time Clock
DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
DCD MCIA_IRQHandler ; 4: MCIa
DCD MCIB_IRQHandler ; 5: MCIb
DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
DCD UART4_IRQHandler ; 9: UART4 - not connected
DCD AACI_IRQHandler ; 10: AACI / AC97
DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
DCD ENET_IRQHandler ; 12: Ethernet
DCD USBDC_IRQHandler ; 13: USB Device
DCD USBHC_IRQHandler ; 14: USB Host Controller
DCD CHLCD_IRQHandler ; 15: Character LCD
DCD FLEXRAY_IRQHandler ; 16: Flexray
DCD CAN_IRQHandler ; 17: CAN
DCD LIN_IRQHandler ; 18: LIN
DCD I2C_IRQHandler ; 19: I2C ADC/DAC
DCD 0 ; 20: Reserved
DCD 0 ; 21: Reserved
DCD 0 ; 22: Reserved
DCD 0 ; 23: Reserved
DCD 0 ; 24: Reserved
DCD 0 ; 25: Reserved
DCD 0 ; 26: Reserved
DCD 0 ; 27: Reserved
DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
DCD 0 ; 29: Reserved - CPU FPGA
DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WDT_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT TIM0_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT MCIA_IRQHandler [WEAK]
EXPORT MCIB_IRQHandler [WEAK]
EXPORT UART0_IRQHandler [WEAK]
EXPORT UART1_IRQHandler [WEAK]
EXPORT UART2_IRQHandler [WEAK]
EXPORT UART3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT AACI_IRQHandler [WEAK]
EXPORT CLCD_IRQHandler [WEAK]
EXPORT ENET_IRQHandler [WEAK]
EXPORT USBDC_IRQHandler [WEAK]
EXPORT USBHC_IRQHandler [WEAK]
EXPORT CHLCD_IRQHandler [WEAK]
EXPORT FLEXRAY_IRQHandler [WEAK]
EXPORT CAN_IRQHandler [WEAK]
EXPORT LIN_IRQHandler [WEAK]
EXPORT I2C_IRQHandler [WEAK]
EXPORT CPU_CLCD_IRQHandler [WEAK]
EXPORT SPI_IRQHandler [WEAK]
WDT_IRQHandler
RTC_IRQHandler
TIM0_IRQHandler
TIM2_IRQHandler
MCIA_IRQHandler
MCIB_IRQHandler
UART0_IRQHandler
UART1_IRQHandler
UART2_IRQHandler
UART3_IRQHandler
UART4_IRQHandler
AACI_IRQHandler
CLCD_IRQHandler
ENET_IRQHandler
USBDC_IRQHandler
USBHC_IRQHandler
CHLCD_IRQHandler
FLEXRAY_IRQHandler
CAN_IRQHandler
LIN_IRQHandler
I2C_IRQHandler
CPU_CLCD_IRQHandler
SPI_IRQHandler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap PROC
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ENDP
ALIGN
ENDIF
END
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_convolution_example/RTE/Device/ARMCM0/system_ARMCM0.c 已删除 100644 → 0
浏览文件 @ 68374821
/**************************************************************************//**
* @file system_ARMCM0.c
* @brief CMSIS Device System Source File for
* ARMCM0 Device Series
* @version V5.00
* @date 08. April 2016
******************************************************************************/
/*
* Copyright (c) 2009-2016 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "ARMCM0.h"
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL ( 5000000U) /* Oscillator frequency */
#define SYSTEM_CLOCK (5 * XTAL)
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK;
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_convolution_example/RTE/Device/ARMCM3/startup_ARMCM3.s 已删除 100644 → 0
浏览文件 @ 68374821
;/**************************************************************************//**
; * @file startup_ARMCM3.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM3 Device Series
; * @version V5.00
; * @date 02. March 2016
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;/*
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;*/
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000C00
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WDT_IRQHandler ; 0: Watchdog Timer
DCD RTC_IRQHandler ; 1: Real Time Clock
DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
DCD MCIA_IRQHandler ; 4: MCIa
DCD MCIB_IRQHandler ; 5: MCIb
DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
DCD UART4_IRQHandler ; 9: UART4 - not connected
DCD AACI_IRQHandler ; 10: AACI / AC97
DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
DCD ENET_IRQHandler ; 12: Ethernet
DCD USBDC_IRQHandler ; 13: USB Device
DCD USBHC_IRQHandler ; 14: USB Host Controller
DCD CHLCD_IRQHandler ; 15: Character LCD
DCD FLEXRAY_IRQHandler ; 16: Flexray
DCD CAN_IRQHandler ; 17: CAN
DCD LIN_IRQHandler ; 18: LIN
DCD I2C_IRQHandler ; 19: I2C ADC/DAC
DCD 0 ; 20: Reserved
DCD 0 ; 21: Reserved
DCD 0 ; 22: Reserved
DCD 0 ; 23: Reserved
DCD 0 ; 24: Reserved
DCD 0 ; 25: Reserved
DCD 0 ; 26: Reserved
DCD 0 ; 27: Reserved
DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
DCD 0 ; 29: Reserved - CPU FPGA
DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WDT_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT TIM0_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT MCIA_IRQHandler [WEAK]
EXPORT MCIB_IRQHandler [WEAK]
EXPORT UART0_IRQHandler [WEAK]
EXPORT UART1_IRQHandler [WEAK]
EXPORT UART2_IRQHandler [WEAK]
EXPORT UART3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT AACI_IRQHandler [WEAK]
EXPORT CLCD_IRQHandler [WEAK]
EXPORT ENET_IRQHandler [WEAK]
EXPORT USBDC_IRQHandler [WEAK]
EXPORT USBHC_IRQHandler [WEAK]
EXPORT CHLCD_IRQHandler [WEAK]
EXPORT FLEXRAY_IRQHandler [WEAK]
EXPORT CAN_IRQHandler [WEAK]
EXPORT LIN_IRQHandler [WEAK]
EXPORT I2C_IRQHandler [WEAK]
EXPORT CPU_CLCD_IRQHandler [WEAK]
EXPORT SPI_IRQHandler [WEAK]
WDT_IRQHandler
RTC_IRQHandler
TIM0_IRQHandler
TIM2_IRQHandler
MCIA_IRQHandler
MCIB_IRQHandler
UART0_IRQHandler
UART1_IRQHandler
UART2_IRQHandler
UART3_IRQHandler
UART4_IRQHandler
AACI_IRQHandler
CLCD_IRQHandler
ENET_IRQHandler
USBDC_IRQHandler
USBHC_IRQHandler
CHLCD_IRQHandler
FLEXRAY_IRQHandler
CAN_IRQHandler
LIN_IRQHandler
I2C_IRQHandler
CPU_CLCD_IRQHandler
SPI_IRQHandler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap PROC
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ENDP
ALIGN
ENDIF
END
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_convolution_example/RTE/Device/ARMCM3/system_ARMCM3.c 已删除 100644 → 0
浏览文件 @ 68374821
/**************************************************************************//**
* @file system_ARMCM3.c
* @brief CMSIS Device System Source File for
* ARMCM3 Device Series
* @version V5.00
* @date 08. April 2016
******************************************************************************/
/*
* Copyright (c) 2009-2016 ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the License); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "ARMCM3.h"
/*----------------------------------------------------------------------------
Define clocks
*----------------------------------------------------------------------------*/
#define XTAL ( 5000000U) /* Oscillator frequency */
#define SYSTEM_CLOCK (5 * XTAL)
/*----------------------------------------------------------------------------
Externals
*----------------------------------------------------------------------------*/
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
extern uint32_t __Vectors;
#endif
/*----------------------------------------------------------------------------
System Core Clock Variable
*----------------------------------------------------------------------------*/
uint32_t SystemCoreClock = SYSTEM_CLOCK;
/*----------------------------------------------------------------------------
System Core Clock update function
*----------------------------------------------------------------------------*/
void SystemCoreClockUpdate (void)
{
SystemCoreClock = SYSTEM_CLOCK;
}
/*----------------------------------------------------------------------------
System initialization function
*----------------------------------------------------------------------------*/
void SystemInit (void)
{
#if defined (__VTOR_PRESENT) && (__VTOR_PRESENT == 1)
SCB->VTOR = (uint32_t) &__Vectors;
#endif
SystemCoreClock = SYSTEM_CLOCK;
}
bsp/imxrt/Libraries/MIMXRT1064/CMSIS/DSP_Lib/Examples/ARM/arm_convolution_example/RTE/Device/ARMCM4_FP/startup_ARMCM4.s 已删除 100644 → 0
浏览文件 @ 68374821
;/**************************************************************************//**
; * @file startup_ARMCM4.s
; * @brief CMSIS Core Device Startup File for
; * ARMCM4 Device Series
; * @version V5.00
; * @date 02. March 2016
; ******************************************************************************/
;/*
; * Copyright (c) 2009-2016 ARM Limited. All rights reserved.
; *
; * SPDX-License-Identifier: Apache-2.0
; *
; * Licensed under the Apache License, Version 2.0 (the License); you may
; * not use this file except in compliance with the License.
; * You may obtain a copy of the License at
; *
; * www.apache.org/licenses/LICENSE-2.0
; *
; * Unless required by applicable law or agreed to in writing, software
; * distributed under the License is distributed on an AS IS BASIS, WITHOUT
; * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
; * See the License for the specific language governing permissions and
; * limitations under the License.
; */
;/*
;//-------- <<< Use Configuration Wizard in Context Menu >>> ------------------
;*/
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; <h> Heap Configuration
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Heap_Size EQU 0x00000C00
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; External Interrupts
DCD WDT_IRQHandler ; 0: Watchdog Timer
DCD RTC_IRQHandler ; 1: Real Time Clock
DCD TIM0_IRQHandler ; 2: Timer0 / Timer1
DCD TIM2_IRQHandler ; 3: Timer2 / Timer3
DCD MCIA_IRQHandler ; 4: MCIa
DCD MCIB_IRQHandler ; 5: MCIb
DCD UART0_IRQHandler ; 6: UART0 - DUT FPGA
DCD UART1_IRQHandler ; 7: UART1 - DUT FPGA
DCD UART2_IRQHandler ; 8: UART2 - DUT FPGA
DCD UART4_IRQHandler ; 9: UART4 - not connected
DCD AACI_IRQHandler ; 10: AACI / AC97
DCD CLCD_IRQHandler ; 11: CLCD Combined Interrupt
DCD ENET_IRQHandler ; 12: Ethernet
DCD USBDC_IRQHandler ; 13: USB Device
DCD USBHC_IRQHandler ; 14: USB Host Controller
DCD CHLCD_IRQHandler ; 15: Character LCD
DCD FLEXRAY_IRQHandler ; 16: Flexray
DCD CAN_IRQHandler ; 17: CAN
DCD LIN_IRQHandler ; 18: LIN
DCD I2C_IRQHandler ; 19: I2C ADC/DAC
DCD 0 ; 20: Reserved
DCD 0 ; 21: Reserved
DCD 0 ; 22: Reserved
DCD 0 ; 23: Reserved
DCD 0 ; 24: Reserved
DCD 0 ; 25: Reserved
DCD 0 ; 26: Reserved
DCD 0 ; 27: Reserved
DCD CPU_CLCD_IRQHandler ; 28: Reserved - CPU FPGA CLCD
DCD 0 ; 29: Reserved - CPU FPGA
DCD UART3_IRQHandler ; 30: UART3 - CPU FPGA
DCD SPI_IRQHandler ; 31: SPI Touchscreen - CPU FPGA
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset Handler
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT SystemInit
IMPORT __main
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT WDT_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT TIM0_IRQHandler [WEAK]
EXPORT TIM2_IRQHandler [WEAK]
EXPORT MCIA_IRQHandler [WEAK]
EXPORT MCIB_IRQHandler [WEAK]
EXPORT UART0_IRQHandler [WEAK]
EXPORT UART1_IRQHandler [WEAK]
EXPORT UART2_IRQHandler [WEAK]
EXPORT UART3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT AACI_IRQHandler [WEAK]
EXPORT CLCD_IRQHandler [WEAK]
EXPORT ENET_IRQHandler [WEAK]
EXPORT USBDC_IRQHandler [WEAK]
EXPORT USBHC_IRQHandler [WEAK]
EXPORT CHLCD_IRQHandler [WEAK]
EXPORT FLEXRAY_IRQHandler [WEAK]
EXPORT CAN_IRQHandler [WEAK]
EXPORT LIN_IRQHandler [WEAK]
EXPORT I2C_IRQHandler [WEAK]
EXPORT CPU_CLCD_IRQHandler [WEAK]
EXPORT SPI_IRQHandler [WEAK]
WDT_IRQHandler
RTC_IRQHandler
TIM0_IRQHandler
TIM2_IRQHandler
MCIA_IRQHandler
MCIB_IRQHandler
UART0_IRQHandler
UART1_IRQHandler
UART2_IRQHandler
UART3_IRQHandler
UART4_IRQHandler
AACI_IRQHandler
CLCD_IRQHandler
ENET_IRQHandler
USBDC_IRQHandler
USBHC_IRQHandler
CHLCD_IRQHandler
FLEXRAY_IRQHandler
CAN_IRQHandler
LIN_IRQHandler
I2C_IRQHandler
CPU_CLCD_IRQHandler
SPI_IRQHandler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap PROC
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ENDP
ALIGN
ENDIF
END
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或