Kconfig

menu "Hardware Drivers Config"

    config SOC_R7FA6M4AF
        bool
        select SOC_SERIES_R7FA6M4
        select RT_USING_COMPONENTS_INIT
        select RT_USING_USER_MAIN
        default y

    menu "Onboard Peripheral Drivers"
    config BSP_USING_SEGGER_RTT_CONSOLE
            bool "Enable SEGGER-RTT for console"
            select PKG_USING_SEGGER_RTT
            default n

    endmenu

    menu "On-chip Peripheral Drivers"

        source "../libraries/HAL_Drivers/Kconfig"

        menuconfig BSP_USING_UART
            bool "Enable UART"
            default y
            select RT_USING_SERIAL
            select RT_USING_SERIAL_V2
            if BSP_USING_UART

                menuconfig BSP_USING_UART0
                    bool "Enable UART0"
                    default n
                    if BSP_USING_UART0
                        config BSP_UART0_RX_USING_DMA
                            bool "Enable UART0 RX DMA"
                            depends on BSP_USING_UART0 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART0_TX_USING_DMA
                            bool "Enable UART0 TX DMA"
                            depends on BSP_USING_UART0 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART0_RX_BUFSIZE
                            int "Set UART0 RX buffer size"
                            range 64 65535
                            depends on RT_USING_SERIAL_V2
                            default 256

                        config BSP_UART0_TX_BUFSIZE
                            int "Set UART0 TX buffer size"
                            range 0 65535
                            depends on RT_USING_SERIAL_V2
                            default 0
                    endif

                menuconfig BSP_USING_UART1
                    bool "Enable UART1"
                    default n
                    if BSP_USING_UART1
                        config BSP_UART1_RX_USING_DMA
                            bool "Enable UART1 RX DMA"
                            depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART1_TX_USING_DMA
                            bool "Enable UART1 TX DMA"
                            depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART1_RX_BUFSIZE
                            int "Set UART1 RX buffer size"
                            range 64 65535
                            depends on RT_USING_SERIAL_V2
                            default 256

                        config BSP_UART1_TX_BUFSIZE
                            int "Set UART1 TX buffer size"
                            range 0 65535
                            depends on RT_USING_SERIAL_V2
                            default 0
                    endif

                menuconfig BSP_USING_UART2
                    bool "Enable UART2"
                    default n
                    if BSP_USING_UART2
                        config BSP_UART2_RX_USING_DMA
                            bool "Enable UART2 RX DMA"
                            depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART2_TX_USING_DMA
                            bool "Enable UART2 TX DMA"
                            depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART2_RX_BUFSIZE
                            int "Set UART2 RX buffer size"
                            range 64 65535
                            depends on RT_USING_SERIAL_V2
                            default 256

                        config BSP_UART2_TX_BUFSIZE
                            int "Set UART2 TX buffer size"
                            range 0 65535
                            depends on RT_USING_SERIAL_V2
                            default 0
                    endif

                menuconfig BSP_USING_UART3
                    bool "Enable UART3"
                    default n
                    if BSP_USING_UART3
                        config BSP_UART3_RX_USING_DMA
                            bool "Enable UART3 RX DMA"
                            depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART3_TX_USING_DMA
                            bool "Enable UART3 TX DMA"
                            depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART3_RX_BUFSIZE
                            int "Set UART3 RX buffer size"
                            range 64 65535
                            depends on RT_USING_SERIAL_V2
                            default 256

                        config BSP_UART3_TX_BUFSIZE
                            int "Set UART3 TX buffer size"
                            range 0 65535
                            depends on RT_USING_SERIAL_V2
                            default 0
                    endif

                menuconfig BSP_USING_UART4
                    bool "Enable UART4"
                    default n
                    if BSP_USING_UART4
                        config BSP_UART4_RX_USING_DMA
                            bool "Enable UART4 RX DMA"
                            depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART4_TX_USING_DMA
                            bool "Enable UART4 TX DMA"
                            depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART4_RX_BUFSIZE
                            int "Set UART4 RX buffer size"
                            range 64 65535
                            depends on RT_USING_SERIAL_V2
                            default 256

                        config BSP_UART4_TX_BUFSIZE
                            int "Set UART4 TX buffer size"
                            range 0 65535
                            depends on RT_USING_SERIAL_V2
                            default 0
                    endif

                menuconfig BSP_USING_UART5
                    bool "Enable UART5"
                    default n
                    if BSP_USING_UART5
                        config BSP_UART5_RX_USING_DMA
                            bool "Enable UART5 RX DMA"
                            depends on BSP_USING_UART5 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART5_TX_USING_DMA
                            bool "Enable UART5 TX DMA"
                            depends on BSP_USING_UART5 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART5_RX_BUFSIZE
                            int "Set UART5 RX buffer size"
                            range 64 65535
                            depends on RT_USING_SERIAL_V2
                            default 256

                        config BSP_UART5_TX_BUFSIZE
                            int "Set UART5 TX buffer size"
                            range 0 65535
                            depends on RT_USING_SERIAL_V2
                            default 0
                    endif

                menuconfig BSP_USING_UART6
                    bool "Enable UART6"
                    default n
                    if BSP_USING_UART6
                        config BSP_UART6_RX_USING_DMA
                            bool "Enable UART6 RX DMA"
                            depends on BSP_USING_UART6 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART6_TX_USING_DMA
                            bool "Enable UART6 TX DMA"
                            depends on BSP_USING_UART6 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART6_RX_BUFSIZE
                            int "Set UART6 RX buffer size"
                            range 64 65535
                            depends on RT_USING_SERIAL_V2
                            default 256

                        config BSP_UART6_TX_BUFSIZE
                            int "Set UART6 TX buffer size"
                            range 0 65535
                            depends on RT_USING_SERIAL_V2
                            default 0
                    endif

                menuconfig BSP_USING_UART7
                    bool "Enable UART7"
                    default n
                    if BSP_USING_UART7
                        config BSP_UART7_RX_USING_DMA
                            bool "Enable UART7 RX DMA"
                            depends on BSP_USING_UART7 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART7_TX_USING_DMA
                            bool "Enable UART7 TX DMA"
                            depends on BSP_USING_UART7 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART7_RX_BUFSIZE
                            int "Set UART7 RX buffer size"
                            range 64 65535
                            depends on RT_USING_SERIAL_V2
                            default 256

                        config BSP_UART7_TX_BUFSIZE
                            int "Set UART7 TX buffer size"
                            range 0 65535
                            depends on RT_USING_SERIAL_V2
                            default 0
                    endif

                menuconfig BSP_USING_UART8
                    bool "Enable UART8"
                    default n
                    if BSP_USING_UART8
                        config BSP_UART8_RX_USING_DMA
                            bool "Enable UART8 RX DMA"
                            depends on BSP_USING_UART8 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART8_TX_USING_DMA
                            bool "Enable UART8 TX DMA"
                            depends on BSP_USING_UART8 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART8_RX_BUFSIZE
                            int "Set UART8 RX buffer size"
                            range 64 65535
                            depends on RT_USING_SERIAL_V2
                            default 256

                        config BSP_UART8_TX_BUFSIZE
                            int "Set UART8 TX buffer size"
                            range 0 65535
                            depends on RT_USING_SERIAL_V2
                            default 0
                    endif

                menuconfig BSP_USING_UART9
                    bool "Enable UART9"
                    default n
                    if BSP_USING_UART9
                        config BSP_UART9_RX_USING_DMA
                            bool "Enable UART9 RX DMA"
                            depends on BSP_USING_UART9 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART9_TX_USING_DMA
                            bool "Enable UART9 TX DMA"
                            depends on BSP_USING_UART9 && RT_SERIAL_USING_DMA
                            default n

                        config BSP_UART9_RX_BUFSIZE
                            int "Set UART9 RX buffer size"
                            range 64 65535
                            depends on RT_USING_SERIAL_V2
                            default 256

                        config BSP_UART9_TX_BUFSIZE
                            int "Set UART9 TX buffer size"
                            range 0 65535
                            depends on RT_USING_SERIAL_V2
                            default 0
                    endif
            endif

        menuconfig BSP_USING_I2C
            bool "Enable I2C BUS"
            default n
            select RT_USING_I2C
            select RT_USING_I2C_BITOPS
            select RT_USING_PIN
            if BSP_USING_I2C
                config BSP_USING_HW_I2C
                    bool "Enable Hardware I2C BUS"
                    default n
                if BSP_USING_HW_I2C
                    config BSP_USING_HW_I2C1
                        bool "Enable Hardware I2C1 BUS"
                        default n
                endif
                if !BSP_USING_HW_I2C
                    menuconfig BSP_USING_I2C1
                        bool "Enable I2C1 BUS (software simulation)"
                        default y
                        if BSP_USING_I2C1
                            config BSP_I2C1_SCL_PIN
                                hex "i2c1 scl pin number"
                                range 0x0000 0x0B0F
                                default 0x050C
                            config BSP_I2C1_SDA_PIN
                                hex "I2C1 sda pin number"
                                range 0x0000 0x0B0F
                                default 0x050B
                        endif
                endif
            endif

        menuconfig BSP_USING_SCI_SPI
            bool "Enable SCI SPI BUS"
            default n
            select RT_USING_SPI
            if BSP_USING_SCI_SPI 
                config BSP_USING_SCI_SPI0
                    bool "Enable SCI SPI0 BUS"
                    default n
                config BSP_USING_SCI_SPI3
                    bool "Enable SCI SPI3 BUS"
                    default n
                config BSP_USING_SCI_SPI6
                    bool "Enable SCI SPI6 BUS"
                    default n
            endif
    
        menuconfig BSP_USING_SPI
            bool "Enable SPI BUS"
            default n
            select RT_USING_SPI
            if BSP_USING_SPI 
                config BSP_USING_SPI0
                    bool "Enable SPI0 BUS"
                    default n
                config BSP_USING_SPI1
                    bool "Enable SPI1 BUS"
                    default n
            endif

        menuconfig BSP_USING_ADC
            bool "Enable ADC"
            default n
            select RT_USING_ADC
            if BSP_USING_ADC
                config BSP_USING_ADC0
                    bool "Enable ADC0"
                    default n

                config BSP_USING_ADC1
                    bool "Enable ADC1"
                    default n
            endif

        menuconfig BSP_USING_DAC
            bool "Enable DAC"
            default n
            select RT_USING_DAC
            if BSP_USING_DAC
                config BSP_USING_DAC0
                    bool "Enable DAC0"
                    default n

                config BSP_USING_DAC1
                    bool "Enable DAC1"
                    default n
            endif

        menuconfig BSP_USING_PWM
            bool "Enable PWM"
            default n
            select RT_USING_PWM
            if BSP_USING_PWM
                config BSP_USING_PWM0
                    bool "Enable GPT0 (32-Bits) output PWM"
                    default n

                config BSP_USING_PWM1
                    bool "Enable GPT1 (32-Bits) output PWM"
                    default n

                config BSP_USING_PWM2
                    bool "Enable GPT2 (32-Bits) output PWM"
                    default n

                config BSP_USING_PWM3
                    bool "Enable GPT3 (32-Bits) output PWM"
                    default n

                config BSP_USING_PWM4
                    bool "Enable GPT4 (16-Bits) output PWM"
                    default n

                config BSP_USING_PWM5
                    bool "Enable GPT5 (16-Bits) output PWM"
                    default n

                config BSP_USING_PWM6
                    bool "Enable GPT6 (16-Bits) output PWM"
                    default n

                config BSP_USING_PWM7
                    bool "Enable GPT7 (16-Bits) output PWM"
                    default n

                config BSP_USING_PWM8
                    bool "Enable GPT8 (16-Bits) output PWM"
                    default n

                config BSP_USING_PWM9
                    bool "Enable GPT9 (16-Bits) output PWM"
                    default n
            endif

        menuconfig BSP_USING_SDHI
            bool "Enable SDHI"
            default n
            select RT_USING_SDIO
            select RT_USING_DFS
            select RT_LIBC_USING_FILEIO
            select RT_USING_POSIX_DEVIO
            if BSP_USING_SDHI
                config SDHI_USING_1_BIT
                    bool "Use 1-bit Mode(4-bit when disable)"
                    default y
            endif

        menuconfig BSP_USING_CAN
            bool "Enable CAN"
            default n
            select RT_USING_CAN
            if BSP_USING_CAN
                config BSP_USING_CAN0
                    bool "Enable CAN0"
                    default n

                config BSP_USING_CAN1
                    bool "Enable CAN1"
                    default n
            endif

        config BSP_USING_SPI_LCD
            bool "Enable SPI LCD"
            select BSP_USING_GPIO
            select BSP_USING_SPI
            select BSP_USING_SPI1
            default n

            menuconfig BSP_USING_LVGL
                bool "Enable LVGL for LCD"
                select PKG_USING_LVGL
                default n
                if BSP_USING_LVGL
                    config BSP_USING_LCD_ILI9431
                        bool "Enable LVGL for LCD_ILI9431"
                        select PKG_USING_ILI9341
                        select BSP_USING_SPI_LCD
                        default n
                endif

            if BSP_USING_LVGL
                config BSP_USING_LVGL_DEMO
                    bool "Enable LVGL demo"
                    select PKG_USING_LV_MUSIC_DEMO
                    default y
            endif

    endmenu

    menu "Board extended module Drivers"

        menuconfig BSP_USING_RW007
            bool "Enable RW007"
            default n
            select PKG_USING_RW007
            select BSP_USING_SPI

        if BSP_USING_RW007
            config RA_RW007_SPI_BUS_NAME
                string "RW007 BUS NAME"
                default "spi1"

            config RA_RW007_CS_PIN
                hex "(HEX)CS pin index"
                default 0x040D

            config RA_RW007_BOOT0_PIN
                hex "(HEX)BOOT0 pin index (same as spi clk pin)"
                default 0x040C

            config RA_RW007_BOOT1_PIN
                hex "(HEX)BOOT1 pin index (same as spi cs pin)"
                default 0x040D

            config RA_RW007_INT_BUSY_PIN
                hex "(HEX)INT/BUSY pin index"
                default 0x0506

            config RA_RW007_RST_PIN
                hex "(HEX)RESET pin index"
                default 0x040F
        endif

    endmenu
endmenu