diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c index 908b410f4c931c1ac62e562d2828ccd68714600f..c1949ff38d618c81dca67effe5e44c306c693b39 100644 --- a/arch/i386/pci/fixup.c +++ b/arch/i386/pci/fixup.c @@ -342,6 +342,61 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB1, pcie_r DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk ); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk ); +/* + * Fixup to mark boot BIOS video selected by BIOS before it changes + * + * From information provided by "Jon Smirl" + * + * The standard boot ROM sequence for an x86 machine uses the BIOS + * to select an initial video card for boot display. This boot video + * card will have it's BIOS copied to C0000 in system RAM. + * IORESOURCE_ROM_SHADOW is used to associate the boot video + * card with this copy. On laptops this copy has to be used since + * the main ROM may be compressed or combined with another image. + * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW + * is marked here since the boot video device will be the only enabled + * video device at this point. + */ + +static void __devinit pci_fixup_video(struct pci_dev *pdev) +{ + struct pci_dev *bridge; + struct pci_bus *bus; + u16 config; + + if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA) + return; + + /* Is VGA routed to us? */ + bus = pdev->bus; + while (bus) { + bridge = bus->self; + + /* + * From information provided by + * "David Miller" + * The bridge control register is valid for PCI header + * type BRIDGE, or CARDBUS. Host to PCI controllers use + * PCI header type NORMAL. + */ + if (bridge + &&((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE) + ||(bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) { + pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, + &config); + if (!(config & PCI_BRIDGE_CTL_VGA)) + return; + } + bus = bus->parent; + } + pci_read_config_word(pdev, PCI_COMMAND, &config); + if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { + pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; + printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev)); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video); + /* * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A. * diff --git a/arch/ia64/pci/Makefile b/arch/ia64/pci/Makefile index e66889e6922a23e628cf9faaa603c8e6c71b783c..fb14dc520d2ddc9f6e82fc733d0184114e266038 100644 --- a/arch/ia64/pci/Makefile +++ b/arch/ia64/pci/Makefile @@ -1,4 +1,4 @@ # # Makefile for the ia64-specific parts of the pci bus # -obj-y := pci.o +obj-y := pci.o fixup.o diff --git a/arch/ia64/pci/fixup.c b/arch/ia64/pci/fixup.c new file mode 100644 index 0000000000000000000000000000000000000000..245dc1fedc24cea6de45d8fb6faee3fae77bac6c --- /dev/null +++ b/arch/ia64/pci/fixup.c @@ -0,0 +1,69 @@ +/* + * Exceptions for specific devices. Usually work-arounds for fatal design flaws. + * Derived from fixup.c of i386 tree. + */ + +#include +#include + +#include + +/* + * Fixup to mark boot BIOS video selected by BIOS before it changes + * + * From information provided by "Jon Smirl" + * + * The standard boot ROM sequence for an x86 machine uses the BIOS + * to select an initial video card for boot display. This boot video + * card will have it's BIOS copied to C0000 in system RAM. + * IORESOURCE_ROM_SHADOW is used to associate the boot video + * card with this copy. On laptops this copy has to be used since + * the main ROM may be compressed or combined with another image. + * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW + * is marked here since the boot video device will be the only enabled + * video device at this point. + */ + +static void __devinit pci_fixup_video(struct pci_dev *pdev) +{ + struct pci_dev *bridge; + struct pci_bus *bus; + u16 config; + + if ((strcmp(platform_name, "dig") != 0) + && (strcmp(platform_name, "hpzx1") != 0)) + return; + /* Maybe, this machine supports legacy memory map. */ + + if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA) + return; + + /* Is VGA routed to us? */ + bus = pdev->bus; + while (bus) { + bridge = bus->self; + + /* + * From information provided by + * "David Miller" + * The bridge control register is valid for PCI header + * type BRIDGE, or CARDBUS. Host to PCI controllers use + * PCI header type NORMAL. + */ + if (bridge + &&((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE) + ||(bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) { + pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, + &config); + if (!(config & PCI_BRIDGE_CTL_VGA)) + return; + } + bus = bus->parent; + } + pci_read_config_word(pdev, PCI_COMMAND, &config); + if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { + pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; + printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev)); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video); diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 7732f4254d21810a4c5441278032169bf59f7e36..e61093b34c268ea77590a0f3545458f5def50674 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -220,7 +220,7 @@ void __init pci_mmcfg_init(int type) pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL); if (pci_mmcfg_virt == NULL) { - printk("PCI: Can not allocate memory for mmconfig structures\n"); + printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n"); return; } for (i = 0; i < pci_mmcfg_config_num; ++i) { @@ -228,7 +228,8 @@ void __init pci_mmcfg_init(int type) pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address, MMCONFIG_APER_MAX); if (!pci_mmcfg_virt[i].virt) { - printk("PCI: Cannot map mmconfig aperture for segment %d\n", + printk(KERN_ERR "PCI: Cannot map mmconfig aperture for " + "segment %d\n", pci_mmcfg_config[i].pci_segment_group_number); return; } diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index c44311ac2fd36ee1de1693e8fc7695acbd2e6101..16167b016266c0499cd4c9f26900b0f48ba5c76e 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -1807,8 +1807,8 @@ u8 acpiphp_get_power_status(struct acpiphp_slot *slot) /* - * latch closed: 1 - * latch open: 0 + * latch open: 1 + * latch closed: 0 */ u8 acpiphp_get_latch_status(struct acpiphp_slot *slot) { @@ -1816,7 +1816,7 @@ u8 acpiphp_get_latch_status(struct acpiphp_slot *slot) sta = get_slot_status(slot); - return (sta & ACPI_STA_SHOW_IN_UI) ? 1 : 0; + return (sta & ACPI_STA_SHOW_IN_UI) ? 0 : 1; } diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index b1c0c707d96ccc6e713042b1d67167609199c723..194f1d21d3d784d3ce73301acf42ff5c38240e32 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -264,6 +264,13 @@ static int pci_device_remove(struct device * dev) pci_dev->driver = NULL; } + /* + * If the device is still on, set the power state as "unknown", + * since it might change by the next time we load the driver. + */ + if (pci_dev->current_state == PCI_D0) + pci_dev->current_state = PCI_UNKNOWN; + /* * We would love to complain here if pci_dev->is_enabled is set, that * the driver should have called pci_disable_device(), but the @@ -288,6 +295,12 @@ static int pci_device_suspend(struct device * dev, pm_message_t state) suspend_report_result(drv->suspend, i); } else { pci_save_state(pci_dev); + /* + * mark its power state as "unknown", since we don't know if + * e.g. the BIOS will change its device state when we suspend. + */ + if (pci_dev->current_state == PCI_D0) + pci_dev->current_state = PCI_UNKNOWN; } return i; } diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index e8a7f1b1b2bc4289546066375d1ef4b2e5792217..204b1c8e972bcaa06c43b6900ecebb7a9a99bde3 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -714,33 +714,6 @@ static void __devinit quirk_vt82c598_id(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id ); -#ifdef CONFIG_ACPI_SLEEP - -/* - * Some VIA systems boot with the abnormal status flag set. This can cause - * the BIOS to re-POST the system on resume rather than passing control - * back to the OS. Clear the flag on boot - */ -static void __devinit quirk_via_abnormal_poweroff(struct pci_dev *dev) -{ - u32 reg; - - acpi_hw_register_read(ACPI_MTX_DO_NOT_LOCK, ACPI_REGISTER_PM1_STATUS, - ®); - - if (reg & 0x800) { - printk("Clearing abnormal poweroff flag\n"); - acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK, - ACPI_REGISTER_PM1_STATUS, - (u16)0x800); - } -} - -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_abnormal_poweroff); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_abnormal_poweroff); - -#endif - /* * CardBus controllers have a legacy base address that enables them * to respond as i82365 pcmcia controllers. We don't want them to @@ -1619,52 +1592,6 @@ static void __devinit fixup_rev1_53c810(struct pci_dev* dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); -/* - * Fixup to mark boot BIOS video selected by BIOS before it changes - * - * From information provided by "Jon Smirl" - * - * The standard boot ROM sequence for an x86 machine uses the BIOS - * to select an initial video card for boot display. This boot video - * card will have it's BIOS copied to C0000 in system RAM. - * IORESOURCE_ROM_SHADOW is used to associate the boot video - * card with this copy. On laptops this copy has to be used since - * the main ROM may be compressed or combined with another image. - * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW - * is marked here since the boot video device will be the only enabled - * video device at this point. - */ - -static void __devinit fixup_video(struct pci_dev *pdev) -{ - struct pci_dev *bridge; - struct pci_bus *bus; - u16 config; - - if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA) - return; - - /* Is VGA routed to us? */ - bus = pdev->bus; - while (bus) { - bridge = bus->self; - if (bridge) { - pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, - &config); - if (!(config & PCI_BRIDGE_CTL_VGA)) - return; - } - bus = bus->parent; - } - pci_read_config_word(pdev, PCI_COMMAND, &config); - if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { - pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; - printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev)); - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_video); - - static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) { while (f < end) { diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index 43e4a49f2cc428275cc77a74bb52c61fe9d428b3..e1dcefc69bb4fb14873ff0c8622d7a971eb21330 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -72,8 +72,9 @@ void __iomem *pci_map_rom(struct pci_dev *pdev, size_t *size) int last_image; /* - * IORESOURCE_ROM_SHADOW set if the VGA enable bit of the Bridge Control - * register is set for embedded VGA. + * IORESOURCE_ROM_SHADOW set on x86, x86_64 and IA64 supports legacy + * memory map if the VGA enable bit of the Bridge Control register is + * set for embedded VGA. */ if (res->flags & IORESOURCE_ROM_SHADOW) { /* primary video rom always starts here */