提交 ebe5e3c6 编写于 作者: F Florian Fainelli 提交者: David S. Miller

net: bcmgenet: set RBUF_SKIP_FCS based on UniMAC CRC forwarding

When the UniMAC block is configured to forward the CRC as part of the
Ethernet frame (priv->crc_fwd_en, set by default), enabling the hardware
RX checksum block unveiled that the dma_rxchk_bit was never set in the
per-packet status bits (dma_flag in bcmgenet_desc_rx). This would make
the chksum_ok variable to be never set to 1, and the networking stack
would have to compute the packet checksums, which takes a substantial
amount of time.

In order for the RXCHK block to properly compute the packet checksum in
hardware, we also need to set the RBUF_SKIP_FCS bit accordingly.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 d3be267d
......@@ -416,6 +416,15 @@ static int bcmgenet_set_rx_csum(struct net_device *dev,
else
rbuf_chk_ctrl &= ~RBUF_RXCHK_EN;
priv->desc_rxchk_en = rx_csum_en;
/* If UniMAC forwards CRC, we need to skip over it to get
* a valid CHK bit to be set in the per-packet status word
*/
if (rx_csum_en && priv->crc_fwd_en)
rbuf_chk_ctrl |= RBUF_SKIP_FCS;
else
rbuf_chk_ctrl &= ~RBUF_SKIP_FCS;
bcmgenet_rbuf_writel(priv, rbuf_chk_ctrl, RBUF_CHK_CTRL);
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册