diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 976663d1fb22b8dcb21191e21ed8fcd12e6e4b64..4e97a7efccef587b7b0a4042263e68680ff183f3 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_mpiix"
-#define DRV_VERSION "0.7.3"
+#define DRV_VERSION "0.7.4"
 
 enum {
 	IDETIM = 0x6C,		/* IDE control register */
@@ -80,8 +80,8 @@ static void mpiix_error_handler(struct ata_port *ap)
  *	@adev: ATA device
  *
  *	Called to do the PIO mode setup. The MPIIX allows us to program the
- *	IORDY sample point (2-5 clocks), recovery 1-4 clocks and whether
- *	prefetching or iordy are used.
+ *	IORDY sample point (2-5 clocks), recovery (1-4 clocks) and whether
+ *	prefetching or IORDY are used.
  *
  *	This would get very ugly because we can only program timing for one
  *	device at a time, the other gets PIO0. Fortunately libata calls
@@ -103,18 +103,19 @@ static void mpiix_set_piomode(struct ata_port *ap, struct ata_device *adev)
 			    { 2, 3 }, };
 
 	pci_read_config_word(pdev, IDETIM, &idetim);
-	/* Mask the IORDY/TIME/PPE0 bank for this device */
+
+	/* Mask the IORDY/TIME/PPE for this device */
 	if (adev->class == ATA_DEV_ATA)
-		control |= PPE;		/* PPE enable for disk */
+		control |= PPE;		/* Enable prefetch/posting for disk */
 	if (ata_pio_need_iordy(adev))
-		control |= IORDY;	/* IORDY */
-	if (pio > 0)
+		control |= IORDY;
+	if (pio > 1)
 		control |= FTIM;	/* This drive is on the fast timing bank */
 
 	/* Mask out timing and clear both TIME bank selects */
 	idetim &= 0xCCEE;
-	idetim &= ~(0x07  << (2 * adev->devno));
-	idetim |= (control << (2 * adev->devno));
+	idetim &= ~(0x07  << (4 * adev->devno));
+	idetim |= control << (4 * adev->devno);
 
 	idetim |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
 	pci_write_config_word(pdev, IDETIM, idetim);