Blackfin: bf537-stamp: add CAN resources

Signed-off-by: NBarry Song <barry.song@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

arch/blackfin/mach-bf537/boards/stamp.c

@@ -302,6 +302,44 @@ static struct platform_device isp1362_hcd_device = {
 };
 #endif
 
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+unsigned short bfin_can_peripherals[] = {
+	P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static struct resource bfin_can_resources[] = {
+	{
+		.start = 0xFFC02A00,
+		.end = 0xFFC02FFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CAN_RX,
+		.end = IRQ_CAN_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN_TX,
+		.end = IRQ_CAN_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN_ERROR,
+		.end = IRQ_CAN_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_can_device = {
+	.name = "bfin_can",
+	.num_resources = ARRAY_SIZE(bfin_can_resources),
+	.resource = bfin_can_resources,
+	.dev = {
+		.platform_data = &bfin_can_peripherals, /* Passed to driver */
+	},
+};
+#endif
+
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
 	.name = "bfin_mii_bus",
@@ -1675,6 +1713,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&ax88180_device,
 #endif
 
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+	&bfin_can_device,
+#endif
+
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 	&bfin_mii_bus,
 	&bfin_mac_device,

arch/blackfin/mach-bf538/boards/ezkit.c

@@ -151,6 +151,44 @@ static struct platform_device bfin_sir2_device = {
 #endif
 #endif
 
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+unsigned short bfin_can_peripherals[] = {
+	P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static struct resource bfin_can_resources[] = {
+	{
+		.start = 0xFFC02A00,
+		.end = 0xFFC02FFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CAN_RX,
+		.end = IRQ_CAN_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN_TX,
+		.end = IRQ_CAN_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN_ERROR,
+		.end = IRQ_CAN_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_can_device = {
+	.name = "bfin_can",
+	.num_resources = ARRAY_SIZE(bfin_can_resources),
+	.resource = bfin_can_resources,
+	.dev = {
+		.platform_data = &bfin_can_peripherals, /* Passed to driver */
+	},
+};
+#endif
+
 /*
  *  USB-LAN EzExtender board
  *  Driver needs to know address, irq and flag pin.
@@ -610,6 +648,10 @@ static struct platform_device *cm_bf538_devices[] __initdata = {
 #endif
 #endif
 
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+	&bfin_can_device,
+#endif
+
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 	&smc91x_device,
 #endif

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -464,6 +464,44 @@ static struct platform_device musb_device = {
 };
 #endif
 
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+unsigned short bfin_can_peripherals[] = {
+	P_CAN0_RX, P_CAN0_TX, 0
+};
+
+static struct resource bfin_can_resources[] = {
+	{
+		.start = 0xFFC02A00,
+		.end = 0xFFC02FFF,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_CAN0_RX,
+		.end = IRQ_CAN0_RX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN0_TX,
+		.end = IRQ_CAN0_TX,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_CAN0_ERROR,
+		.end = IRQ_CAN0_ERROR,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_can_device = {
+	.name = "bfin_can",
+	.num_resources = ARRAY_SIZE(bfin_can_resources),
+	.resource = bfin_can_resources,
+	.dev = {
+		.platform_data = &bfin_can_peripherals, /* Passed to driver */
+	},
+};
+#endif
+
 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 static struct resource bfin_atapi_resources[] = {
 	{
@@ -956,6 +994,10 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_isp1760_device,
 #endif
 
+#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
+	&bfin_can_device,
+#endif
+
 #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
 	&bfin_atapi_device,
 #endif