Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (171 commits)
  Blackfin arch: fix bug - BF527 0.2 silicon has different CPUID (DSPID) value
  Blackfin arch: Enlarge flash partition for kenel for bf533/bf537 boards
  Blackfin arch: fix bug: kernel crash when enable SDIO host driver
  Blackfin arch: Print FP at level KERN_NOTICE
  Blackfin arch: drop ad73311 test code
  Blackfin arch: update board default configs
  Blackfin arch: Set PB4 as the default irq for bf548 board v1.4+.
  Blackfin arch: fix typo in early printk bit size processing
  Blackfin arch: enable reprogram cclk and sclk for bf518f-ezbrd
  Blackfin arch: add SDIO host driver platform data
  Blackfin arch: fix bug - kernel stops at initial console
  Blackfin arch: fix bug - kernel crash after config IP for ethernet port
  Blackfin arch: add sdh support for bf518f-ezbrd
  Blackfin arch: fix bug - kernel detects BF532 incorrectly
  Blackfin arch: add () to avoid warnings from gcc
  Blackfin arch: change HWTRACE Kconfig and set it on default
  Blackfin arch: Clean oprofile build path for blackfin
  Blackfin arch: remove hardware PM code, oprofile not use it
  Blackfin arch: rewrite get_sclk()/get_vco()
  Blackfin arch: cleanup and unify the ins functions
  ...

Documentation/blackfin/00-INDEX

@@ -9,3 +9,6 @@ cachefeatures.txt
 
 Filesystems
 	- Requirements for mounting the root file system.
+
+bfin-gpio-note.txt
+	- Notes in developing/using bfin-gpio driver.

Documentation/blackfin/bfin-gpio-notes.txt

+/*
+ * File:         Documentation/blackfin/bfin-gpio-note.txt
+ * Based on:
+ * Author:
+ *
+ * Created:      $Id: bfin-gpio-note.txt 2008-11-24 16:42 grafyang $
+ * Description:  This file contains the notes in developing/using bfin-gpio.
+ *
+ *
+ * Rev:
+ *
+ * Modified:
+ *               Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ */
+
+
+1. Blackfin GPIO introduction
+
+    There are many GPIO pins on Blackfin. Most of these pins are muxed to
+    multi-functions. They can be configured as peripheral, or just as GPIO,
+    configured to input with interrupt enabled, or output.
+
+    For detailed information, please see "arch/blackfin/kernel/bfin_gpio.c",
+    or the relevant HRM.
+
+
+2. Avoiding resource conflict
+
+    Followed function groups are used to avoiding resource conflict,
+    - Use the pin as peripheral,
+	int peripheral_request(unsigned short per, const char *label);
+	int peripheral_request_list(const unsigned short per[], const char *label);
+	void peripheral_free(unsigned short per);
+	void peripheral_free_list(const unsigned short per[]);
+    - Use the pin as GPIO,
+	int bfin_gpio_request(unsigned gpio, const char *label);
+	void bfin_gpio_free(unsigned gpio);
+    - Use the pin as GPIO interrupt,
+	int bfin_gpio_irq_request(unsigned gpio, const char *label);
+	void bfin_gpio_irq_free(unsigned gpio);
+
+    The request functions will record the function state for a certain pin,
+    the free functions will clear it's function state.
+    Once a pin is requested, it can't be requested again before it is freed by
+    previous caller, otherwise kernel will dump stacks, and the request
+    function fail.
+    These functions are wrapped by other functions, most of the users need not
+    care.
+
+
+3. But there are some exceptions
+    - Kernel permit the identical GPIO be requested both as GPIO and GPIO
+    interrut.
+    Some drivers, like gpio-keys, need this behavior. Kernel only print out
+    warning messages like,
+	bfin-gpio: GPIO 24 is already reserved by gpio-keys: BTN0, and you are
+configuring it as IRQ!
+
+        Note: Consider the case that, if there are two drivers need the
+	identical GPIO, one of them use it as GPIO, the other use it as
+	GPIO interrupt. This will really cause resource conflict. So if
+	there is any abnormal driver behavior, please check the bfin-gpio
+	warning messages.
+
+    - Kernel permit the identical GPIO be requested from the same driver twice.
+
+
+

arch/blackfin/Kconfig

@@ -26,6 +26,7 @@ config BLACKFIN
 	default y
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config ZONE_DMA
 	bool
@@ -59,10 +60,6 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config HARDWARE_PM
-	def_bool y
-	depends on OPROFILE
-
 source "init/Kconfig"
 
 source "kernel/Kconfig.preempt"
@@ -77,6 +74,26 @@ choice
 	prompt "CPU"
 	default BF533
 
+config BF512
+	bool "BF512"
+	help
+	  BF512 Processor Support.
+
+config BF514
+	bool "BF514"
+	help
+	  BF514 Processor Support.
+
+config BF516
+	bool "BF516"
+	help
+	  BF516 Processor Support.
+
+config BF518
+	bool "BF518"
+	help
+	  BF518 Processor Support.
+
 config BF522
 	bool "BF522"
 	help
@@ -137,6 +154,16 @@ config BF537
 	help
 	  BF537 Processor Support.
 
+config BF538
+	bool "BF538"
+	help
+	  BF538 Processor Support.
+
+config BF539
+	bool "BF539"
+	help
+	  BF539 Processor Support.
+
 config BF542
 	bool "BF542"
 	help
@@ -169,28 +196,55 @@ config BF561
 
 endchoice
 
+config SMP
+	depends on BF561
+	bool "Symmetric multi-processing support"
+	---help---
+	  This enables support for systems with more than one CPU,
+	  like the dual core BF561. If you have a system with only one
+	  CPU, say N. If you have a system with more than one CPU, say Y.
+
+	  If you don't know what to do here, say N.
+
+config NR_CPUS
+	int
+	depends on SMP
+	default 2 if BF561
+
+config IRQ_PER_CPU
+	bool
+	depends on SMP
+	default y
+
+config TICK_SOURCE_SYSTMR0
+	bool
+	select BFIN_GPTIMERS
+	depends on SMP
+	default y
+
 config BF_REV_MIN
 	int
-	default 0 if (BF52x || BF54x)
+	default 0 if (BF51x || BF52x || BF54x)
 	default 2 if (BF537 || BF536 || BF534)
 	default 3 if (BF561 ||BF533 || BF532 || BF531)
+	default 4 if (BF538 || BF539)
 
 config BF_REV_MAX
 	int
-	default 2 if (BF52x || BF54x)
+	default 2 if (BF51x || BF52x || BF54x)
 	default 3 if (BF537 || BF536 || BF534)
-	default 5 if (BF561)
+	default 5 if (BF561 || BF538 || BF539)
 	default 6 if (BF533 || BF532 || BF531)
 
 choice
 	prompt "Silicon Rev"
-	default BF_REV_0_1 if (BF52x || BF54x)
+	default BF_REV_0_1 if (BF51x || BF52x || BF54x)
 	default BF_REV_0_2 if (BF534 || BF536 || BF537)
 	default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
 
 config BF_REV_0_0
 	bool "0.0"
-	depends on (BF52x || BF54x)
+	depends on (BF51x || BF52x || BF54x)
 
 config BF_REV_0_1
 	bool "0.1"
@@ -206,11 +260,11 @@ config BF_REV_0_3
 
 config BF_REV_0_4
 	bool "0.4"
-	depends on (BF561 || BF533 || BF532 || BF531)
+	depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539)
 
 config BF_REV_0_5
 	bool "0.5"
-	depends on (BF561 || BF533 || BF532 || BF531)
+	depends on (BF561 || BF533 || BF532 || BF531 || BF538 || BF539)
 
 config BF_REV_0_6
 	bool "0.6"
@@ -224,6 +278,11 @@ config BF_REV_NONE
 
 endchoice
 
+config BF51x
+	bool
+	depends on (BF512 || BF514 || BF516 || BF518)
+	default y
+
 config BF52x
 	bool
 	depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
@@ -258,7 +317,7 @@ config MEM_MT48LC16M16A2TG_75
 
 config MEM_MT48LC32M8A2_75
 	bool
-	depends on (BFIN537_STAMP || PNAV10)
+	depends on (BFIN537_STAMP || PNAV10 || BFIN538_EZKIT)
 	default y
 
 config MEM_MT48LC8M32B2B5_7
@@ -271,10 +330,17 @@ config MEM_MT48LC32M16A2TG_75
 	depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)
 	default y
 
+config MEM_MT48LC32M8A2_75
+	bool
+	depends on (BFIN518F_EZBRD)
+	default y
+
+source "arch/blackfin/mach-bf518/Kconfig"
 source "arch/blackfin/mach-bf527/Kconfig"
 source "arch/blackfin/mach-bf533/Kconfig"
 source "arch/blackfin/mach-bf561/Kconfig"
 source "arch/blackfin/mach-bf537/Kconfig"
+source "arch/blackfin/mach-bf538/Kconfig"
 source "arch/blackfin/mach-bf548/Kconfig"
 
 menu "Board customizations"
@@ -307,6 +373,7 @@ config BOOT_LOAD
 
 config ROM_BASE
 	hex "Kernel ROM Base"
+	depends on ROMKERNEL
 	default "0x20040000"
 	range 0x20000000 0x20400000 if !(BF54x || BF561)
 	range 0x20000000 0x30000000 if (BF54x || BF561)
@@ -318,7 +385,7 @@ config CLKIN_HZ
 	int "Frequency of the crystal on the board in Hz"
 	default "11059200" if BFIN533_STAMP
 	default "27000000" if BFIN533_EZKIT
-	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD)
+	default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN538_EZKIT || BFIN518F-EZBRD)
 	default "30000000" if BFIN561_EZKIT
 	default "24576000" if PNAV10
 	default "10000000" if BFIN532_IP0X
@@ -354,11 +421,11 @@ config VCO_MULT
 	range 1 64
 	default "22" if BFIN533_EZKIT
 	default "45" if BFIN533_STAMP
-	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM)
+	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM || BFIN538_EZKIT)
 	default "22" if BFIN533_BLUETECHNIX_CM
 	default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
 	default "20" if BFIN561_EZKIT
-	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD)
+	default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD || BFIN518F_EZBRD)
 	help
 	  This controls the frequency of the on-chip PLL. This can be between 1 and 64.
 	  PLL Frequency = (Crystal Frequency) * (this setting)
@@ -407,19 +474,70 @@ config MEM_MT46V32M16_5B
 	bool "MT46V32M16_5B"
 endchoice
 
-config MAX_MEM_SIZE
-	int "Max SDRAM Memory Size in MBytes"
-	depends on !MPU
-	default 512
+choice
+	prompt "DDR/SDRAM Timing"
+	depends on BFIN_KERNEL_CLOCK
+	default BFIN_KERNEL_CLOCK_MEMINIT_CALC
+	help
+	  This option allows you to specify Blackfin SDRAM/DDR Timing parameters
+	  The calculated SDRAM timing parameters may not be 100%
+	  accurate - This option is therefore marked experimental.
+
+config BFIN_KERNEL_CLOCK_MEMINIT_CALC
+	bool "Calculate Timings (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+
+config BFIN_KERNEL_CLOCK_MEMINIT_SPEC
+	bool "Provide accurate Timings based on target SCLK"
 	help
-	  This is the max memory size that the kernel will create CPLB
-	  tables for.  Your system will not be able to handle any more.
+	  Please consult the Blackfin Hardware Reference Manuals as well
+	  as the memory device datasheet.
+	  http://docs.blackfin.uclinux.org/doku.php?id=bfin:sdram
+endchoice
+
+menu "Memory Init Control"
+	depends on BFIN_KERNEL_CLOCK_MEMINIT_SPEC
+
+config MEM_DDRCTL0
+	depends on BF54x
+	hex "DDRCTL0"
+	default 0x0
+
+config MEM_DDRCTL1
+	depends on BF54x
+	hex "DDRCTL1"
+	default 0x0
+
+config MEM_DDRCTL2
+	depends on BF54x
+	hex "DDRCTL2"
+	default 0x0
+
+config MEM_EBIU_DDRQUE
+	depends on BF54x
+	hex "DDRQUE"
+	default 0x0
+
+config MEM_SDRRC
+	depends on !BF54x
+	hex "SDRRC"
+	default 0x0
+
+config MEM_SDGCTL
+	depends on !BF54x
+	hex "SDGCTL"
+	default 0x0
+endmenu
 
 #
 # Max & Min Speeds for various Chips
 #
 config MAX_VCO_HZ
 	int
+	default 400000000 if BF512
+	default 400000000 if BF514
+	default 400000000 if BF516
+	default 400000000 if BF518
 	default 600000000 if BF522
 	default 400000000 if BF523
 	default 400000000 if BF524
@@ -459,6 +577,7 @@ source kernel/Kconfig.hz
 
 config GENERIC_TIME
 	bool "Generic time"
+	depends on !SMP
 	default y
 
 config GENERIC_CLOCKEVENTS
@@ -533,6 +652,7 @@ endmenu
 
 
 menu "Blackfin Kernel Optimizations"
+	depends on !SMP
 
 comment "Memory Optimizations"
 
@@ -655,6 +775,17 @@ config APP_STACK_L1
 
 	  Currently only works with FLAT binaries.
 
+config EXCEPTION_L1_SCRATCH
+	bool "Locate exception stack in L1 Scratch Memory"
+	default n
+	depends on !APP_STACK_L1 && !SYSCALL_TAB_L1
+	help
+	  Whenever an exception occurs, use the L1 Scratch memory for
+	  stack storage.  You cannot place the stacks of FLAT binaries
+	  in L1 when using this option.
+
+	  If you don't use L1 Scratch, then you should say Y here.
+
 comment "Speed Optimizations"
 config BFIN_INS_LOWOVERHEAD
 	bool "ins[bwl] low overhead, higher interrupt latency"
@@ -684,7 +815,6 @@ config BFIN_INS_LOWOVERHEAD
 
 endmenu
 
-
 choice
 	prompt "Kernel executes from"
 	help
@@ -714,17 +844,9 @@ config BFIN_GPTIMERS
 	  To compile this driver as a module, choose M here: the module
 	  will be called gptimers.ko.
 
-config BFIN_DMA_5XX
-	bool "Enable DMA Support"
-	depends on (BF52x || BF53x || BF561 || BF54x)
-	default y
-	help
-	  DMA driver for BF5xx.
-
 choice
-	prompt "Uncached SDRAM region"
+	prompt "Uncached DMA region"
 	default DMA_UNCACHED_1M
-	depends on BFIN_DMA_5XX
 config DMA_UNCACHED_4M
 	bool "Enable 4M DMA region"
 config DMA_UNCACHED_2M
@@ -751,9 +873,11 @@ config BFIN_ICACHE_LOCK
 choice
 	prompt "Policy"
 	depends on BFIN_DCACHE
-	default BFIN_WB
+	default BFIN_WB if !SMP
+	default BFIN_WT if SMP
 config BFIN_WB
 	bool "Write back"
+	depends on !SMP
 	help
 	  Write Back Policy:
 	    Cached data will be written back to SDRAM only when needed.
@@ -790,7 +914,7 @@ endchoice
 
 config BFIN_L2_CACHEABLE
 	bool "Cache L2 SRAM"
-	depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || BF561)
+	depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || (BF561 && !SMP))
 	default n
 	help
 	  Select to make L2 SRAM cacheable in L1 data and instruction cache.
@@ -980,7 +1104,7 @@ config PM_WAKEUP_GPIO_NUMBER
 	int "GPIO number"
 	range 0 47
 	depends on PM_WAKEUP_BY_GPIO
-	default 2 if BFIN537_STAMP
+	default 2
 
 choice
 	prompt "GPIO Polarity"
@@ -1003,7 +1127,7 @@ comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
 
 config PM_BFIN_WAKE_PH6
 	bool "Allow Wake-Up from on-chip PHY or PH6 GP"
-	depends on PM && (BF52x || BF534 || BF536 || BF537)
+	depends on PM && (BF51x || BF52x || BF534 || BF536 || BF537)
 	default n
 	help
 	  Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
@@ -1020,6 +1144,12 @@ menu "CPU Frequency scaling"
 
 source "drivers/cpufreq/Kconfig"
 
+config BFIN_CPU_FREQ
+	bool
+	depends on CPU_FREQ
+	select CPU_FREQ_TABLE
+	default y
+
 config CPU_VOLTAGE
 	bool "CPU Voltage scaling"
 	depends on EXPERIMENTAL

arch/blackfin/Kconfig.debug

@@ -2,9 +2,31 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
+config DEBUG_STACKOVERFLOW
+	bool "Check for stack overflows"
+	depends on DEBUG_KERNEL
+	help
+	  This option will cause messages to be printed if free stack space
+	  drops below a certain limit.
+
+config DEBUG_STACK_USAGE
+	bool "Enable stack utilization instrumentation"
+	depends on DEBUG_KERNEL
+	help
+	  Enables the display of the minimum amount of free stack which each
+	  task has ever had available in the sysrq-T output.
+
+	  This option will slow down process creation somewhat.
+
 config HAVE_ARCH_KGDB
 	def_bool y
 
+config KGDB_TESTCASE
+	tristate "KGDB: for test case in expect"
+	default n
+	help
+	  This is a kgdb test case for automated testing.
+
 config DEBUG_VERBOSE
 	bool "Verbose fault messages"
 	default y
@@ -182,11 +204,11 @@ config DEBUG_BFIN_HWTRACE_EXPAND_LEN
 	  4 for (2^4) 16k, or 4096 entries
 
 config DEBUG_BFIN_NO_KERN_HWTRACE
-	bool "Trace user apps (turn off hwtrace in kernel)"
+	bool "Turn off hwtrace in CPLB handlers"
 	depends on DEBUG_BFIN_HWTRACE_ON
-	default n
+	default y
 	help
-	  Some pieces of the kernel contain a lot of flow changes which can
+	  The CPLB error handler contains a lot of flow changes which can
 	  quickly fill up the hardware trace buffer.  When debugging crashes,
 	  the hardware trace may indicate that the problem lies in kernel
 	  space when in reality an application is buggy.

arch/blackfin/Makefile

@@ -21,6 +21,10 @@ KALLSYMS         += --symbol-prefix=_
 KBUILD_DEFCONFIG := BF537-STAMP_defconfig
 
 # setup the machine name and the machine dependent settings
+machine-$(CONFIG_BF512) := bf518
+machine-$(CONFIG_BF514) := bf518
+machine-$(CONFIG_BF516) := bf518
+machine-$(CONFIG_BF518) := bf518
 machine-$(CONFIG_BF522) := bf527
 machine-$(CONFIG_BF523) := bf527
 machine-$(CONFIG_BF524) := bf527
@@ -33,6 +37,8 @@ machine-$(CONFIG_BF533) := bf533
 machine-$(CONFIG_BF534) := bf537
 machine-$(CONFIG_BF536) := bf537
 machine-$(CONFIG_BF537) := bf537
+machine-$(CONFIG_BF538) := bf538
+machine-$(CONFIG_BF539) := bf538
 machine-$(CONFIG_BF542) := bf548
 machine-$(CONFIG_BF544) := bf548
 machine-$(CONFIG_BF547) := bf548
@@ -42,6 +48,10 @@ machine-$(CONFIG_BF561) := bf561
 MACHINE := $(machine-y)
 export MACHINE
 
+cpu-$(CONFIG_BF512) := bf512
+cpu-$(CONFIG_BF514) := bf514
+cpu-$(CONFIG_BF516) := bf516
+cpu-$(CONFIG_BF518) := bf518
 cpu-$(CONFIG_BF522) := bf522
 cpu-$(CONFIG_BF523) := bf523
 cpu-$(CONFIG_BF524) := bf524
@@ -54,6 +64,8 @@ cpu-$(CONFIG_BF533) := bf533
 cpu-$(CONFIG_BF534) := bf534
 cpu-$(CONFIG_BF536) := bf536
 cpu-$(CONFIG_BF537) := bf537
+cpu-$(CONFIG_BF538) := bf538
+cpu-$(CONFIG_BF539) := bf539
 cpu-$(CONFIG_BF542) := bf542
 cpu-$(CONFIG_BF544) := bf544
 cpu-$(CONFIG_BF547) := bf547
@@ -79,7 +91,7 @@ KBUILD_AFLAGS += -mcpu=$(cpu-y)-$(rev-y)
 CHECKFLAGS_SILICON = $(shell echo "" | $(CPP) $(KBUILD_CFLAGS) -dD - 2>/dev/null | awk '$$2 == "__SILICON_REVISION__" { print $$3 }')
 CHECKFLAGS += -D__SILICON_REVISION__=$(CHECKFLAGS_SILICON) -Dl1_text=__used__
 
-head-y   := arch/$(ARCH)/mach-$(MACHINE)/head.o arch/$(ARCH)/kernel/init_task.o
+head-y   := arch/$(ARCH)/kernel/init_task.o
 
 core-y   += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ arch/$(ARCH)/mach-common/
 
@@ -95,10 +107,10 @@ else
 core-y	+= arch/$(ARCH)/kernel/cplb-nompu/
 endif
 
-libs-y   += arch/$(ARCH)/lib/
-
 drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/
 
+libs-y   += arch/$(ARCH)/lib/
+
 machdirs	:= $(patsubst %,arch/blackfin/mach-%/, $(machine-y))
 
 KBUILD_CFLAGS += -Iarch/$(ARCH)/include/

arch/blackfin/configs/BF533-EZKIT_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24.7
+# Linux kernel version: 2.6.28-rc2
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -8,7 +8,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 CONFIG_BLACKFIN=y
 CONFIG_ZONE_DMA=y
-CONFIG_SEMAPHORE_SLEEPERS=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -31,18 +30,16 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -51,26 +48,35 @@ CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-CONFIG_ELF_CORE=y
+# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -81,6 +87,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -94,9 +101,11 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+CONFIG_FREEZER=y
 
 #
 # Blackfin Processor Options
@@ -105,6 +114,10 @@ CONFIG_PREEMPT_VOLUNTARY=y
 #
 # Processor and Board Settings
 #
+# CONFIG_BF512 is not set
+# CONFIG_BF514 is not set
+# CONFIG_BF516 is not set
+# CONFIG_BF518 is not set
 # CONFIG_BF522 is not set
 # CONFIG_BF523 is not set
 # CONFIG_BF524 is not set
@@ -117,24 +130,30 @@ CONFIG_BF533=y
 # CONFIG_BF534 is not set
 # CONFIG_BF536 is not set
 # CONFIG_BF537 is not set
+# CONFIG_BF538 is not set
+# CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
 # CONFIG_BF544 is not set
 # CONFIG_BF547 is not set
 # CONFIG_BF548 is not set
 # CONFIG_BF549 is not set
 # CONFIG_BF561 is not set
+CONFIG_BF_REV_MIN=3
+CONFIG_BF_REV_MAX=6
 # CONFIG_BF_REV_0_0 is not set
 # CONFIG_BF_REV_0_1 is not set
 # CONFIG_BF_REV_0_2 is not set
 CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_0_4 is not set
 # CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_0_6 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_BFIN533_EZKIT=y
 # CONFIG_BFIN533_STAMP is not set
+# CONFIG_BLACKSTAMP is not set
 # CONFIG_BFIN533_BLUETECHNIX_CM is not set
 # CONFIG_H8606_HVSISTEMAS is not set
 # CONFIG_BFIN532_IP0X is not set
@@ -187,7 +206,6 @@ CONFIG_BOOT_LOAD=0x1000
 #
 CONFIG_CLKIN_HZ=27000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
-CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=750000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -201,6 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_CYCLES_CLOCKSOURCE is not set
@@ -238,6 +257,12 @@ CONFIG_SYS_BFIN_SPINLOCK_L1=y
 CONFIG_CACHELINE_ALIGNED_L1=y
 # CONFIG_SYSCALL_TAB_L1 is not set
 # CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_APP_STACK_L1=y
+
+#
+# Speed Optimizations
+#
+CONFIG_BFIN_INS_LOWOVERHEAD=y
 CONFIG_RAMKERNEL=y
 # CONFIG_ROMKERNEL is not set
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -246,14 +271,13 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
-CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
@@ -268,7 +292,6 @@ CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_ICACHE_LOCK is not set
 # CONFIG_BFIN_WB is not set
 CONFIG_BFIN_WT=y
-CONFIG_L1_MAX_PIECE=16
 # CONFIG_MPU is not set
 
 #
@@ -297,7 +320,6 @@ CONFIG_BANK_3=0xAAC2
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
-# CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -308,29 +330,30 @@ CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
-# CPU Frequency scaling
+# Possible Suspend Mem / Hibernate Wake-Up Sources
 #
-# CONFIG_CPU_FREQ is not set
 
 #
-# Networking
+# CPU Frequency scaling
 #
+# CONFIG_CPU_FREQ is not set
 CONFIG_NET=y
 
 #
@@ -343,6 +366,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -372,8 +396,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
@@ -382,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -398,6 +421,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 CONFIG_IRDA=m
 
 #
@@ -429,25 +453,15 @@ CONFIG_IRTTY_SIR=m
 #
 # CONFIG_DONGLE is not set
 
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
 #
 # FIR device drivers
 #
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
@@ -465,6 +479,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -473,6 +489,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -516,6 +533,7 @@ CONFIG_MTD_ROM=m
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -550,11 +568,14 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -567,7 +588,6 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -580,11 +600,14 @@ CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -594,10 +617,10 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -645,8 +668,11 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
+CONFIG_BFIN_DMA_INTERFACE=m
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_BFIN_JTAG_COMM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -675,22 +701,19 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_CAN4LINUX is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
 
 #
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
 # CONFIG_SPI_BITBANG is not set
 
 #
@@ -699,14 +722,18 @@ CONFIG_SPI_BFIN=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_MAX1111 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -715,6 +742,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -724,22 +753,29 @@ CONFIG_WATCHDOG=y
 # CONFIG_SOFT_WATCHDOG is not set
 CONFIG_BFIN_WDT=y
 
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_WM8400 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -754,18 +790,22 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -784,47 +824,51 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_BFIN=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -864,11 +908,11 @@ CONFIG_SYSFS=y
 # CONFIG_EFS_FS is not set
 CONFIG_YAFFS_FS=m
 CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
 # CONFIG_YAFFS_DOES_ECC is not set
 CONFIG_YAFFS_YAFFS2=y
 CONFIG_YAFFS_AUTO_YAFFS2=y
 # CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=10
 # CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
 # CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
 CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
@@ -885,8 +929,11 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -894,13 +941,12 @@ CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -956,9 +1002,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -966,14 +1009,53 @@ CONFIG_INSTRUMENTATION=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
+# CONFIG_DEBUG_HWERR is not set
+# CONFIG_DEBUG_DOUBLEFAULT is not set
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
@@ -991,9 +1073,94 @@ CONFIG_ACCESS_CHECK=y
 #
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_NETWORK is not set
-# CONFIG_SECURITY_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
@@ -1001,6 +1168,7 @@ CONFIG_SECURITY=y
 CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/blackfin/configs/BlackStamp_defconfig

@@ -53,7 +53,7 @@ CONFIG_KALLSYMS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-CONFIG_ELF_CORE=y
+# CONFIG_ELF_CORE is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -276,7 +276,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
 CONFIG_BFIN_GPTIMERS=y
-CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y

arch/blackfin/configs/CM-BF527_defconfig

@@ -42,7 +42,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_FAIR_USER_SCHED=y
 # CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
@@ -56,7 +56,7 @@ CONFIG_KALLSYMS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-CONFIG_ELF_CORE=y
+# CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -190,14 +190,14 @@ CONFIG_IRQ_MAC_RX=11
 CONFIG_IRQ_PORTH_INTA=11
 CONFIG_IRQ_MAC_TX=11
 CONFIG_IRQ_PORTH_INTB=11
-CONFIG_IRQ_TMR0=12
-CONFIG_IRQ_TMR1=12
-CONFIG_IRQ_TMR2=12
-CONFIG_IRQ_TMR3=12
-CONFIG_IRQ_TMR4=12
-CONFIG_IRQ_TMR5=12
-CONFIG_IRQ_TMR6=12
-CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_TIMER0=12
+CONFIG_IRQ_TIMER1=12
+CONFIG_IRQ_TIMER2=12
+CONFIG_IRQ_TIMER3=12
+CONFIG_IRQ_TIMER4=12
+CONFIG_IRQ_TIMER5=12
+CONFIG_IRQ_TIMER6=12
+CONFIG_IRQ_TIMER7=12
 CONFIG_IRQ_PORTG_INTA=12
 CONFIG_IRQ_PORTG_INTB=12
 CONFIG_IRQ_MEM_DMA0=13
@@ -292,7 +292,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
 CONFIG_BFIN_GPTIMERS=y
-CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
@@ -650,6 +649,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_TWI_LCD is not set
 CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -699,7 +699,7 @@ CONFIG_I2C_CHARDEV=m
 # I2C Hardware Bus support
 #
 CONFIG_I2C_BLACKFIN_TWI=m
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set

arch/blackfin/configs/CM-BF533_defconfig

@@ -42,7 +42,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -55,7 +55,7 @@ CONFIG_KALLSYMS=y
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-CONFIG_ELF_CORE=y
+# CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -254,7 +254,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
 # CONFIG_BFIN_GPTIMERS is not set
-CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -598,6 +597,7 @@ CONFIG_NETDEV_10000=y
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/CM-BF537E_defconfig

@@ -42,7 +42,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -55,7 +55,7 @@ CONFIG_KALLSYMS=y
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-CONFIG_ELF_CORE=y
+# CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -157,14 +157,14 @@ CONFIG_IRQ_UART1_RX=10
 CONFIG_IRQ_UART1_TX=10
 CONFIG_IRQ_MAC_RX=11
 CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_TMR0=12
-CONFIG_IRQ_TMR1=12
-CONFIG_IRQ_TMR2=12
-CONFIG_IRQ_TMR3=12
-CONFIG_IRQ_TMR4=12
-CONFIG_IRQ_TMR5=12
-CONFIG_IRQ_TMR6=12
-CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_TIMER0=12
+CONFIG_IRQ_TIMER1=12
+CONFIG_IRQ_TIMER2=12
+CONFIG_IRQ_TIMER3=12
+CONFIG_IRQ_TIMER4=12
+CONFIG_IRQ_TIMER5=12
+CONFIG_IRQ_TIMER6=12
+CONFIG_IRQ_TIMER7=12
 CONFIG_IRQ_PORTG_INTB=12
 CONFIG_IRQ_MEM_DMA0=13
 CONFIG_IRQ_MEM_DMA1=13
@@ -262,7 +262,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
 # CONFIG_BFIN_GPTIMERS is not set
-CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -627,6 +626,7 @@ CONFIG_NETDEV_10000=y
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/CM-BF537U_defconfig

@@ -42,7 +42,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -55,7 +55,7 @@ CONFIG_KALLSYMS=y
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-CONFIG_ELF_CORE=y
+# CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -157,14 +157,14 @@ CONFIG_IRQ_UART1_RX=10
 CONFIG_IRQ_UART1_TX=10
 CONFIG_IRQ_MAC_RX=11
 CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_TMR0=12
-CONFIG_IRQ_TMR1=12
-CONFIG_IRQ_TMR2=12
-CONFIG_IRQ_TMR3=12
-CONFIG_IRQ_TMR4=12
-CONFIG_IRQ_TMR5=12
-CONFIG_IRQ_TMR6=12
-CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_TIMER0=12
+CONFIG_IRQ_TIMER1=12
+CONFIG_IRQ_TIMER2=12
+CONFIG_IRQ_TIMER3=12
+CONFIG_IRQ_TIMER4=12
+CONFIG_IRQ_TIMER5=12
+CONFIG_IRQ_TIMER6=12
+CONFIG_IRQ_TIMER7=12
 CONFIG_IRQ_PORTG_INTB=12
 CONFIG_IRQ_MEM_DMA0=13
 CONFIG_IRQ_MEM_DMA1=13
@@ -262,7 +262,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
 # CONFIG_BFIN_GPTIMERS is not set
-CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -607,6 +606,7 @@ CONFIG_NETDEV_10000=y
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/CM-BF548_defconfig

@@ -41,7 +41,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_FAIR_USER_SCHED=y
 # CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
@@ -55,7 +55,7 @@ CONFIG_KALLSYMS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-CONFIG_ELF_CORE=y
+# CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -325,7 +325,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
-CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -544,7 +543,7 @@ CONFIG_MTD_RAM=y
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x800000
+CONFIG_MTD_PHYSMAP_LEN=0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -732,6 +731,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_TWI_LCD is not set
 # CONFIG_SIMPLE_GPIO is not set
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -782,7 +782,7 @@ CONFIG_I2C_CHARDEV=y
 # I2C Hardware Bus support
 #
 CONFIG_I2C_BLACKFIN_TWI=y
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set

arch/blackfin/configs/CM-BF561_defconfig

@@ -42,7 +42,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_FAIR_USER_SCHED=y
 # CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -55,7 +55,7 @@ CONFIG_KALLSYMS=y
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-CONFIG_ELF_CORE=y
+# CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -300,7 +300,6 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
 CONFIG_LARGE_ALLOCS=y
 # CONFIG_BFIN_GPTIMERS is not set
-CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -612,6 +611,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_SIMPLE_GPIO is not set
 # CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #

arch/blackfin/configs/H8606_defconfig

@@ -54,7 +54,7 @@ CONFIG_KALLSYMS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-CONFIG_ELF_CORE=y
+# CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -250,7 +250,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
 CONFIG_BFIN_GPTIMERS=y
-CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set

arch/blackfin/configs/IP0X_defconfig

@@ -55,7 +55,7 @@ CONFIG_KALLSYMS=y
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-CONFIG_ELF_CORE=y
+# CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -262,7 +262,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
 # CONFIG_BFIN_GPTIMERS is not set
-CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set

arch/blackfin/configs/SRV1_defconfig

@@ -59,7 +59,7 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-CONFIG_ELF_CORE=y
+# CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -172,14 +172,14 @@ CONFIG_IRQ_UART1_RX=10
 CONFIG_IRQ_UART1_TX=10
 CONFIG_IRQ_MAC_RX=11
 CONFIG_IRQ_MAC_TX=11
-CONFIG_IRQ_TMR0=12
-CONFIG_IRQ_TMR1=12
-CONFIG_IRQ_TMR2=12
-CONFIG_IRQ_TMR3=12
-CONFIG_IRQ_TMR4=12
-CONFIG_IRQ_TMR5=12
-CONFIG_IRQ_TMR6=12
-CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_TIMER0=12
+CONFIG_IRQ_TIMER1=12
+CONFIG_IRQ_TIMER2=12
+CONFIG_IRQ_TIMER3=12
+CONFIG_IRQ_TIMER4=12
+CONFIG_IRQ_TIMER5=12
+CONFIG_IRQ_TIMER6=12
+CONFIG_IRQ_TIMER7=12
 CONFIG_IRQ_PORTG_INTB=12
 CONFIG_IRQ_MEM_DMA0=13
 CONFIG_IRQ_MEM_DMA1=13
@@ -271,7 +271,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_LARGE_ALLOCS=y
-CONFIG_BFIN_DMA_5XX=y
 CONFIG_DMA_UNCACHED_2M=y
 # CONFIG_DMA_UNCACHED_1M is not set
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -786,7 +785,7 @@ CONFIG_I2C_CHARDEV=y
 #
 # CONFIG_I2C_BLACKFIN_GPIO is not set
 CONFIG_I2C_BLACKFIN_TWI=y
-CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set

arch/blackfin/include/asm/bfin-global.h

@@ -47,6 +47,9 @@
 # define DMA_UNCACHED_REGION (0)
 #endif
 
+extern void bfin_setup_caches(unsigned int cpu);
+extern void bfin_setup_cpudata(unsigned int cpu);
+
 extern unsigned long get_cclk(void);
 extern unsigned long get_sclk(void);
 extern unsigned long sclk_to_usecs(unsigned long sclk);
@@ -58,8 +61,6 @@ extern void dump_bfin_trace_buffer(void);
 
 /* init functions only */
 extern int init_arch_irq(void);
-extern void bfin_icache_init(void);
-extern void bfin_dcache_init(void);
 extern void init_exception_vectors(void);
 extern void program_IAR(void);
 
@@ -110,7 +111,7 @@ extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size;
 
 #ifdef CONFIG_BFIN_ICACHE_LOCK
 extern void cache_grab_lock(int way);
-extern void cache_lock(int way);
+extern void bfin_cache_lock(int way);
 #endif
 
 #endif

arch/blackfin/include/asm/bfin5xx_spi.h

-/************************************************************
-
-* Copyright (C) 2006-2008, Analog Devices. All Rights Reserved
-*
-* FILE bfin5xx_spi.h
-* PROGRAMMER(S): Luke Yang (Analog Devices Inc.)
-*
-*
-* DATE OF CREATION: March. 10th 2006
-*
-* SYNOPSIS:
-*
-* DESCRIPTION: header file for SPI controller driver for Blackfin5xx.
-**************************************************************
-
-* MODIFICATION HISTORY:
-* March 10, 2006  bfin5xx_spi.h Created. (Luke Yang)
-
-************************************************************/
+/*
+ * Blackfin On-Chip SPI Driver
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Licensed under the GPL-2 or later.
+ */
 
 #ifndef _SPI_CHANNEL_H_
 #define _SPI_CHANNEL_H_

arch/blackfin/include/asm/bfin_sdh.h

+/*
+ * bfin_sdh.h - Blackfin SDH definitions
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_SDH_H__
+#define __BFIN_SDH_H__
+
+struct bfin_sd_host {
+	int dma_chan;
+	int irq_int0;
+	int irq_int1;
+	u16 pin_req[7];
+};
+
+#endif

arch/blackfin/include/asm/bfin_sport.h

@@ -120,9 +120,6 @@ struct sport_register {
 #define SPORT_IOC_MAGIC		'P'
 #define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
 
-/* Test purpose */
-#define ENABLE_AD73311		_IOWR('P', 0x02, int)
-
 struct sport_dev {
 	struct cdev cdev;	/* Char device structure */
 

arch/blackfin/include/asm/bfrom.h

@@ -43,6 +43,11 @@ __attribute__((__noreturn__))
 static inline void bfrom_SoftReset(void *new_stack)
 {
 	while (1)
+		/*
+		 * We don't declare the SP as clobbered on purpose, since
+		 * it confuses the heck out of the compiler, and this function
+		 * never returns
+		 */
 		__asm__ __volatile__(
 			"sp = %[stack];"
 			"jump (%[bfrom_syscontrol]);"

arch/blackfin/include/asm/blackfin.h

@@ -6,11 +6,6 @@
 #ifndef _BLACKFIN_H_
 #define _BLACKFIN_H_
 
-#define LO(con32) ((con32) & 0xFFFF)
-#define lo(con32) ((con32) & 0xFFFF)
-#define HI(con32) (((con32) >> 16) & 0xFFFF)
-#define hi(con32) (((con32) >> 16) & 0xFFFF)
-
 #include <mach/anomaly.h>
 
 #ifndef __ASSEMBLY__
@@ -65,6 +60,11 @@ static inline void CSYNC(void)
 
 #else  /* __ASSEMBLY__ */
 
+#define LO(con32) ((con32) & 0xFFFF)
+#define lo(con32) ((con32) & 0xFFFF)
+#define HI(con32) (((con32) >> 16) & 0xFFFF)
+#define hi(con32) (((con32) >> 16) & 0xFFFF)
+
 /* SSYNC & CSYNC implementations for assembly files */
 
 #define ssync(x) SSYNC(x)

arch/blackfin/include/asm/cache.h

@@ -12,6 +12,11 @@
 #define L1_CACHE_BYTES	(1 << L1_CACHE_SHIFT)
 #define SMP_CACHE_BYTES	L1_CACHE_BYTES
 
+#ifdef CONFIG_SMP
+#define __cacheline_aligned
+#else
+#define ____cacheline_aligned
+
 /*
  * Put cacheline_aliged data to L1 data memory
  */
@@ -21,9 +26,33 @@
 		__section__(".data_l1.cacheline_aligned")))
 #endif
 
+#endif
+
 /*
  * largest L1 which this arch supports
  */
 #define L1_CACHE_SHIFT_MAX	5
 
+#if defined(CONFIG_SMP) && \
+    !defined(CONFIG_BFIN_CACHE_COHERENT) && \
+    defined(CONFIG_BFIN_DCACHE)
+#define __ARCH_SYNC_CORE_DCACHE
+#ifndef __ASSEMBLY__
+asmlinkage void __raw_smp_mark_barrier_asm(void);
+asmlinkage void __raw_smp_check_barrier_asm(void);
+
+static inline void smp_mark_barrier(void)
+{
+	__raw_smp_mark_barrier_asm();
+}
+static inline void smp_check_barrier(void)
+{
+	__raw_smp_check_barrier_asm();
+}
+
+void resync_core_dcache(void);
+#endif
+#endif
+
+
 #endif

arch/blackfin/include/asm/checksum.h

@@ -78,7 +78,8 @@ csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
                  "%0 = %0 + %4;\n\t"
                  "NOP;\n\t"
  		 : "=d" (sum)
-		 : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum));
+		 : "d" (daddr), "d" (saddr), "d" ((ntohs(len)<<16)+proto*256), "d" (1), "0"(sum)
+		 : "CC");
 
 	return (sum);
 }

arch/blackfin/include/asm/hardirq.h

@@ -42,4 +42,6 @@ typedef struct {
 
 #define __ARCH_IRQ_EXIT_IRQS_DISABLED	1
 
+extern void ack_bad_irq(unsigned int irq);
+
 #endif

arch/blackfin/include/asm/l1layout.h

@@ -8,6 +8,7 @@
 
 #include <asm/blackfin.h>
 
+#ifndef CONFIG_SMP
 #ifndef __ASSEMBLY__
 
 /* Data that is "mapped" into the process VM at the start of the L1 scratch
@@ -24,8 +25,10 @@ struct l1_scratch_task_info
 };
 
 /* A pointer to the structure in memory.  */
-#define L1_SCRATCH_TASK_INFO ((struct l1_scratch_task_info *)L1_SCRATCH_START)
+#define L1_SCRATCH_TASK_INFO ((struct l1_scratch_task_info *)\
+						get_l1_scratch_start())
 
 #endif
+#endif
 
 #endif

arch/blackfin/include/asm/xor.h

+#include <asm-generic/xor.h>