提交 5bb38adc 编写于 作者: A Andi Kleen 提交者: H. Peter Anvin

x86: mce: Remove old i386 machine check code

As announced in feature-remove-schedule.txt remove CONFIG_X86_OLD_MCE

This patch only removes code.

The ancient machine check code for very old systems that are not supported
by CONFIG_X86_NEW_MCE is still kept.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
上级 bab9bc65
......@@ -444,13 +444,3 @@ What: CONFIG_RFKILL_INPUT
When: 2.6.33
Why: Should be implemented in userspace, policy daemon.
Who: Johannes Berg <johannes@sipsolutions.net>
----------------------------
What: CONFIG_X86_OLD_MCE
When: 2.6.32
Why: Remove the old legacy 32bit machine check code. This has been
superseded by the newer machine check code from the 64bit port,
but the old version has been kept around for easier testing. Note this
doesn't impact the old P5 and WinChip machine check handlers.
Who: Andi Kleen <andi@firstfloor.org>
......@@ -781,21 +781,10 @@ config X86_MCE
The action the kernel takes depends on the severity of the problem,
ranging from warning messages to halting the machine.
config X86_OLD_MCE
depends on X86_32 && X86_MCE
bool "Use legacy machine check code (will go away)"
default n
select X86_ANCIENT_MCE
---help---
Use the old i386 machine check code. This is merely intended for
testing in a transition period. Try this if you run into any machine
check related software problems, but report the problem to
linux-kernel. When in doubt say no.
config X86_NEW_MCE
depends on X86_MCE
bool
default y if (!X86_OLD_MCE && X86_32) || X86_64
default y
config X86_MCE_INTEL
def_bool y
......@@ -835,29 +824,9 @@ config X86_MCE_INJECT
If you don't know what a machine check is and you don't do kernel
QA it is safe to say n.
config X86_MCE_NONFATAL
tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
depends on X86_OLD_MCE
---help---
Enabling this feature starts a timer that triggers every 5 seconds which
will look at the machine check registers to see if anything happened.
Non-fatal problems automatically get corrected (but still logged).
Disable this if you don't want to see these messages.
Seeing the messages this option prints out may be indicative of dying
or out-of-spec (ie, overclocked) hardware.
This option only does something on certain CPUs.
(AMD Athlon/Duron and Intel Pentium 4)
config X86_MCE_P4THERMAL
bool "check for P4 thermal throttling interrupt."
depends on X86_OLD_MCE && X86_MCE && (X86_UP_APIC || SMP)
---help---
Enabling this feature will cause a message to be printed when the P4
enters thermal throttling.
config X86_THERMAL_VECTOR
def_bool y
depends on X86_MCE_P4THERMAL || X86_MCE_INTEL
depends on X86_MCE_INTEL
config VM86
bool "Enable VM86 support" if EMBEDDED
......
......@@ -115,13 +115,6 @@ void mcheck_init(struct cpuinfo_x86 *c);
static inline void mcheck_init(struct cpuinfo_x86 *c) {}
#endif
#ifdef CONFIG_X86_OLD_MCE
extern int nr_mce_banks;
void amd_mcheck_init(struct cpuinfo_x86 *c);
void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
#endif
#ifdef CONFIG_X86_ANCIENT_MCE
void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
void winchip_mcheck_init(struct cpuinfo_x86 *c);
......@@ -208,11 +201,7 @@ extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
void intel_init_thermal(struct cpuinfo_x86 *c);
#ifdef CONFIG_X86_NEW_MCE
void mce_log_therm_throt_event(__u64 status);
#else
static inline void mce_log_therm_throt_event(__u64 status) {}
#endif
#endif /* __KERNEL__ */
#endif /* _ASM_X86_MCE_H */
obj-y = mce.o
obj-$(CONFIG_X86_NEW_MCE) += mce-severity.o
obj-$(CONFIG_X86_OLD_MCE) += k7.o p4.o p6.o
obj-$(CONFIG_X86_ANCIENT_MCE) += winchip.o p5.o
obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o
obj-$(CONFIG_X86_MCE_AMD) += mce_amd.o
obj-$(CONFIG_X86_MCE_NONFATAL) += non-fatal.o
obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o
obj-$(CONFIG_X86_MCE_INJECT) += mce-inject.o
......
/*
* Athlon specific Machine Check Exception Reporting
* (C) Copyright 2002 Dave Jones <davej@redhat.com>
*/
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/mce.h>
#include <asm/msr.h>
/* Machine Check Handler For AMD Athlon/Duron: */
static void k7_machine_check(struct pt_regs *regs, long error_code)
{
u32 alow, ahigh, high, low;
u32 mcgstl, mcgsth;
int recover = 1;
int i;
rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
if (mcgstl & (1<<0)) /* Recoverable ? */
recover = 0;
printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
smp_processor_id(), mcgsth, mcgstl);
for (i = 1; i < nr_mce_banks; i++) {
rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
if (high & (1<<31)) {
char misc[20];
char addr[24];
misc[0] = '\0';
addr[0] = '\0';
if (high & (1<<29))
recover |= 1;
if (high & (1<<25))
recover |= 2;
high &= ~(1<<31);
if (high & (1<<27)) {
rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
}
if (high & (1<<26)) {
rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
snprintf(addr, 24, " at %08x%08x", ahigh, alow);
}
printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
smp_processor_id(), i, high, low, misc, addr);
/* Clear it: */
wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
/* Serialize: */
wmb();
add_taint(TAINT_MACHINE_CHECK);
}
}
if (recover & 2)
panic("CPU context corrupt");
if (recover & 1)
panic("Unable to continue");
printk(KERN_EMERG "Attempting to continue.\n");
mcgstl &= ~(1<<2);
wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
}
/* AMD K7 machine check is Intel like: */
void amd_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
int i;
if (!cpu_has(c, X86_FEATURE_MCE))
return;
machine_check_vector = k7_machine_check;
/* Make sure the vector pointer is visible before we enable MCEs: */
wmb();
printk(KERN_INFO "Intel machine check architecture supported.\n");
rdmsr(MSR_IA32_MCG_CAP, l, h);
if (l & (1<<8)) /* Control register present ? */
wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
nr_mce_banks = l & 0xff;
/*
* Clear status for MC index 0 separately, we don't touch CTL,
* as some K7 Athlons cause spurious MCEs when its enabled:
*/
if (boot_cpu_data.x86 == 6) {
wrmsr(MSR_IA32_MC0_STATUS, 0x0, 0x0);
i = 1;
} else
i = 0;
for (; i < nr_mce_banks; i++) {
wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
}
set_in_cr4(X86_CR4_MCE);
printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
smp_processor_id());
}
......@@ -58,8 +58,6 @@ void (*machine_check_vector)(struct pt_regs *, long error_code) =
int mce_disabled __read_mostly;
#ifdef CONFIG_X86_NEW_MCE
#define MISC_MCELOG_MINOR 227
#define SPINUNIT 100 /* 100ns */
......@@ -1993,51 +1991,6 @@ static __init int mce_init_device(void)
device_initcall(mce_init_device);
#else /* CONFIG_X86_OLD_MCE: */
int nr_mce_banks;
EXPORT_SYMBOL_GPL(nr_mce_banks); /* non-fatal.o */
/* This has to be run for each processor */
void mcheck_init(struct cpuinfo_x86 *c)
{
if (mce_disabled)
return;
switch (c->x86_vendor) {
case X86_VENDOR_AMD:
amd_mcheck_init(c);
break;
case X86_VENDOR_INTEL:
if (c->x86 == 5)
intel_p5_mcheck_init(c);
if (c->x86 == 6)
intel_p6_mcheck_init(c);
if (c->x86 == 15)
intel_p4_mcheck_init(c);
break;
case X86_VENDOR_CENTAUR:
if (c->x86 == 5)
winchip_mcheck_init(c);
break;
default:
break;
}
printk(KERN_INFO "mce: CPU supports %d MCE banks\n", nr_mce_banks);
}
static int __init mcheck_enable(char *str)
{
mce_p5_enabled = 1;
return 1;
}
__setup("mce", mcheck_enable);
#endif /* CONFIG_X86_OLD_MCE */
/*
* Old style boot options parsing. Only for compatibility.
*/
......
/*
* Non Fatal Machine Check Exception Reporting
*
* (C) Copyright 2002 Dave Jones. <davej@redhat.com>
*
* This file contains routines to check for non-fatal MCEs every 15s
*
*/
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/mce.h>
#include <asm/msr.h>
static int firstbank;
#define MCE_RATE (15*HZ) /* timer rate is 15s */
static void mce_checkregs(void *info)
{
u32 low, high;
int i;
for (i = firstbank; i < nr_mce_banks; i++) {
rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
if (!(high & (1<<31)))
continue;
printk(KERN_INFO "MCE: The hardware reports a non fatal, "
"correctable incident occurred on CPU %d.\n",
smp_processor_id());
printk(KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
/*
* Scrub the error so we don't pick it up in MCE_RATE
* seconds time:
*/
wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
/* Serialize: */
wmb();
add_taint(TAINT_MACHINE_CHECK);
}
}
static void mce_work_fn(struct work_struct *work);
static DECLARE_DELAYED_WORK(mce_work, mce_work_fn);
static void mce_work_fn(struct work_struct *work)
{
on_each_cpu(mce_checkregs, NULL, 1);
schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE));
}
static int __init init_nonfatal_mce_checker(void)
{
struct cpuinfo_x86 *c = &boot_cpu_data;
/* Check for MCE support */
if (!cpu_has(c, X86_FEATURE_MCE))
return -ENODEV;
/* Check for PPro style MCA */
if (!cpu_has(c, X86_FEATURE_MCA))
return -ENODEV;
/* Some Athlons misbehave when we frob bank 0 */
if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
boot_cpu_data.x86 == 6)
firstbank = 1;
else
firstbank = 0;
/*
* Check for non-fatal errors every MCE_RATE s
*/
schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE));
printk(KERN_INFO "Machine check exception polling timer started.\n");
return 0;
}
module_init(init_nonfatal_mce_checker);
MODULE_LICENSE("GPL");
/*
* P4 specific Machine Check Exception Reporting
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <asm/processor.h>
#include <asm/mce.h>
#include <asm/msr.h>
/* as supported by the P4/Xeon family */
struct intel_mce_extended_msrs {
u32 eax;
u32 ebx;
u32 ecx;
u32 edx;
u32 esi;
u32 edi;
u32 ebp;
u32 esp;
u32 eflags;
u32 eip;
/* u32 *reserved[]; */
};
static int mce_num_extended_msrs;
/* P4/Xeon Extended MCE MSR retrieval, return 0 if unsupported */
static void intel_get_extended_msrs(struct intel_mce_extended_msrs *r)
{
u32 h;
rdmsr(MSR_IA32_MCG_EAX, r->eax, h);
rdmsr(MSR_IA32_MCG_EBX, r->ebx, h);
rdmsr(MSR_IA32_MCG_ECX, r->ecx, h);
rdmsr(MSR_IA32_MCG_EDX, r->edx, h);
rdmsr(MSR_IA32_MCG_ESI, r->esi, h);
rdmsr(MSR_IA32_MCG_EDI, r->edi, h);
rdmsr(MSR_IA32_MCG_EBP, r->ebp, h);
rdmsr(MSR_IA32_MCG_ESP, r->esp, h);
rdmsr(MSR_IA32_MCG_EFLAGS, r->eflags, h);
rdmsr(MSR_IA32_MCG_EIP, r->eip, h);
}
static void intel_machine_check(struct pt_regs *regs, long error_code)
{
u32 alow, ahigh, high, low;
u32 mcgstl, mcgsth;
int recover = 1;
int i;
rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
if (mcgstl & (1<<0)) /* Recoverable ? */
recover = 0;
printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
smp_processor_id(), mcgsth, mcgstl);
if (mce_num_extended_msrs > 0) {
struct intel_mce_extended_msrs dbg;
intel_get_extended_msrs(&dbg);
printk(KERN_DEBUG "CPU %d: EIP: %08x EFLAGS: %08x\n"
"\teax: %08x ebx: %08x ecx: %08x edx: %08x\n"
"\tesi: %08x edi: %08x ebp: %08x esp: %08x\n",
smp_processor_id(), dbg.eip, dbg.eflags,
dbg.eax, dbg.ebx, dbg.ecx, dbg.edx,
dbg.esi, dbg.edi, dbg.ebp, dbg.esp);
}
for (i = 0; i < nr_mce_banks; i++) {
rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
if (high & (1<<31)) {
char misc[20];
char addr[24];
misc[0] = addr[0] = '\0';
if (high & (1<<29))
recover |= 1;
if (high & (1<<25))
recover |= 2;
high &= ~(1<<31);
if (high & (1<<27)) {
rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
}
if (high & (1<<26)) {
rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
snprintf(addr, 24, " at %08x%08x", ahigh, alow);
}
printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
smp_processor_id(), i, high, low, misc, addr);
}
}
if (recover & 2)
panic("CPU context corrupt");
if (recover & 1)
panic("Unable to continue");
printk(KERN_EMERG "Attempting to continue.\n");
/*
* Do not clear the MSR_IA32_MCi_STATUS if the error is not
* recoverable/continuable.This will allow BIOS to look at the MSRs
* for errors if the OS could not log the error.
*/
for (i = 0; i < nr_mce_banks; i++) {
u32 msr;
msr = MSR_IA32_MC0_STATUS+i*4;
rdmsr(msr, low, high);
if (high&(1<<31)) {
/* Clear it */
wrmsr(msr, 0UL, 0UL);
/* Serialize */
wmb();
add_taint(TAINT_MACHINE_CHECK);
}
}
mcgstl &= ~(1<<2);
wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
}
void intel_p4_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
int i;
machine_check_vector = intel_machine_check;
wmb();
printk(KERN_INFO "Intel machine check architecture supported.\n");
rdmsr(MSR_IA32_MCG_CAP, l, h);
if (l & (1<<8)) /* Control register present ? */
wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
nr_mce_banks = l & 0xff;
for (i = 0; i < nr_mce_banks; i++) {
wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
}
set_in_cr4(X86_CR4_MCE);
printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
smp_processor_id());
/* Check for P4/Xeon extended MCE MSRs */
rdmsr(MSR_IA32_MCG_CAP, l, h);
if (l & (1<<9)) {/* MCG_EXT_P */
mce_num_extended_msrs = (l >> 16) & 0xff;
printk(KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)"
" available\n",
smp_processor_id(), mce_num_extended_msrs);
#ifdef CONFIG_X86_MCE_P4THERMAL
/* Check for P4/Xeon Thermal monitor */
intel_init_thermal(c);
#endif
}
}
/*
* P6 specific Machine Check Exception Reporting
* (C) Copyright 2002 Alan Cox <alan@lxorguk.ukuu.org.uk>
*/
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/mce.h>
#include <asm/msr.h>
/* Machine Check Handler For PII/PIII */
static void intel_machine_check(struct pt_regs *regs, long error_code)
{
u32 alow, ahigh, high, low;
u32 mcgstl, mcgsth;
int recover = 1;
int i;
rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
if (mcgstl & (1<<0)) /* Recoverable ? */
recover = 0;
printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
smp_processor_id(), mcgsth, mcgstl);
for (i = 0; i < nr_mce_banks; i++) {
rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
if (high & (1<<31)) {
char misc[20];
char addr[24];
misc[0] = '\0';
addr[0] = '\0';
if (high & (1<<29))
recover |= 1;
if (high & (1<<25))
recover |= 2;
high &= ~(1<<31);
if (high & (1<<27)) {
rdmsr(MSR_IA32_MC0_MISC+i*4, alow, ahigh);
snprintf(misc, 20, "[%08x%08x]", ahigh, alow);
}
if (high & (1<<26)) {
rdmsr(MSR_IA32_MC0_ADDR+i*4, alow, ahigh);
snprintf(addr, 24, " at %08x%08x", ahigh, alow);
}
printk(KERN_EMERG "CPU %d: Bank %d: %08x%08x%s%s\n",
smp_processor_id(), i, high, low, misc, addr);
}
}
if (recover & 2)
panic("CPU context corrupt");
if (recover & 1)
panic("Unable to continue");
printk(KERN_EMERG "Attempting to continue.\n");
/*
* Do not clear the MSR_IA32_MCi_STATUS if the error is not
* recoverable/continuable.This will allow BIOS to look at the MSRs
* for errors if the OS could not log the error:
*/
for (i = 0; i < nr_mce_banks; i++) {
unsigned int msr;
msr = MSR_IA32_MC0_STATUS+i*4;
rdmsr(msr, low, high);
if (high & (1<<31)) {
/* Clear it: */
wrmsr(msr, 0UL, 0UL);
/* Serialize: */
wmb();
add_taint(TAINT_MACHINE_CHECK);
}
}
mcgstl &= ~(1<<2);
wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
}
/* Set up machine check reporting for processors with Intel style MCE: */
void intel_p6_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
int i;
/* Check for MCE support */
if (!cpu_has(c, X86_FEATURE_MCE))
return;
/* Check for PPro style MCA */
if (!cpu_has(c, X86_FEATURE_MCA))
return;
/* Ok machine check is available */
machine_check_vector = intel_machine_check;
/* Make sure the vector pointer is visible before we enable MCEs: */
wmb();
printk(KERN_INFO "Intel machine check architecture supported.\n");
rdmsr(MSR_IA32_MCG_CAP, l, h);
if (l & (1<<8)) /* Control register present ? */
wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
nr_mce_banks = l & 0xff;
/*
* Following the example in IA-32 SDM Vol 3:
* - MC0_CTL should not be written
* - Status registers on all banks should be cleared on reset
*/
for (i = 1; i < nr_mce_banks; i++)
wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
for (i = 0; i < nr_mce_banks; i++)
wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
set_in_cr4(X86_CR4_MCE);
printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
smp_processor_id());
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册