提交 57d1c91f 编写于 作者: L Linus Torvalds
......@@ -10,6 +10,7 @@
*.a
*.s
*.ko
*.so
*.mod.c
#
......
......@@ -18,6 +18,7 @@ In this document you will find information about:
=== 5. Include files
--- 5.1 How to include files from the kernel include dir
--- 5.2 External modules using an include/ dir
--- 5.3 External modules using several directories
=== 6. Module installation
--- 6.1 INSTALL_MOD_PATH
--- 6.2 INSTALL_MOD_DIR
......@@ -344,6 +345,45 @@ directory and therefore needs to deal with this in their kbuild file.
Note that in the assignment there is no space between -I and the path.
This is a kbuild limitation: there must be no space present.
--- 5.3 External modules using several directories
If an external module does not follow the usual kernel style but
decide to spread files over several directories then kbuild can
support this too.
Consider the following example:
|
+- src/complex_main.c
| +- hal/hardwareif.c
| +- hal/include/hardwareif.h
+- include/complex.h
To build a single module named complex.ko we then need the following
kbuild file:
Kbuild:
obj-m := complex.o
complex-y := src/complex_main.o
complex-y += src/hal/hardwareif.o
EXTRA_CFLAGS := -I$(src)/include
EXTRA_CFLAGS += -I$(src)src/hal/include
kbuild knows how to handle .o files located in another directory -
although this is NOT reccommended practice. The syntax is to specify
the directory relative to the directory where the Kbuild file is
located.
To find the .h files we have to explicitly tell kbuild where to look
for the .h files. When kbuild executes current directory is always
the root of the kernel tree (argument to -C) and therefore we have to
tell kbuild how to find the .h files using absolute paths.
$(src) will specify the absolute path to the directory where the
Kbuild file are located when being build as an external module.
Therefore -I$(src)/ is used to point out the directory of the Kbuild
file and any additional path are just appended.
=== 6. Module installation
......
......@@ -60,7 +60,7 @@ MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
#define dprintk(level, args...) \
do { \
if ((debug & level)) { \
printk("%s: %s(): ", __stringify(KBUILD_MODNAME), \
printk("%s: %s(): ", KBUILD_MODNAME, \
__FUNCTION__); \
printk(args); } \
} while (0)
......
......@@ -19,7 +19,7 @@ extern int budget_debug;
#endif
#define dprintk(level,args...) \
do { if ((budget_debug & level)) { printk("%s: %s(): ",__stringify(KBUILD_MODNAME), __FUNCTION__); printk(args); } } while (0)
do { if ((budget_debug & level)) { printk("%s: %s(): ", KBUILD_MODNAME, __FUNCTION__); printk(args); } } while (0)
struct budget_info {
char *name;
......
......@@ -34,7 +34,7 @@ static int debug = 0; /* insmod parameter */
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
#define dprintk(args...) \
do { if (debug) { printk("%s: %s()[%d]: ",__stringify(KBUILD_MODNAME), __FUNCTION__, __LINE__); printk(args); } } while (0)
do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
#define SWITCH 0x00
#define LEVEL_ADJUST 0x02
......
......@@ -36,7 +36,7 @@ static int debug = 0; /* insmod parameter */
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
#define dprintk(args...) \
do { if (debug) { printk("%s: %s()[%d]: ",__stringify(KBUILD_MODNAME), __FUNCTION__, __LINE__); printk(args); } } while (0)
do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
#define TEA6415C_NUM_INPUTS 8
#define TEA6415C_NUM_OUTPUTS 6
......
......@@ -36,7 +36,7 @@ static int debug = 0; /* insmod parameter */
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
#define dprintk(args...) \
do { if (debug) { printk("%s: %s()[%d]: ",__stringify(KBUILD_MODNAME), __FUNCTION__, __LINE__); printk(args); } } while (0)
do { if (debug) { printk("%s: %s()[%d]: ", KBUILD_MODNAME, __FUNCTION__, __LINE__); printk(args); } } while (0)
/* addresses to scan, found only at 0x4c and/or 0x4d (7-Bit) */
static unsigned short normal_i2c[] = { I2C_TEA6420_1, I2C_TEA6420_2, I2C_CLIENT_END };
......
......@@ -10,7 +10,7 @@
#ifdef MODULE
#define MODULE_PARAM_PREFIX /* empty */
#else
#define MODULE_PARAM_PREFIX __stringify(KBUILD_MODNAME) "."
#define MODULE_PARAM_PREFIX KBUILD_MODNAME "."
#endif
#ifdef MODULE
......
......@@ -21,14 +21,14 @@
extern unsigned int saa7146_debug;
//#define DEBUG_PROLOG printk("(0x%08x)(0x%08x) %s: %s(): ",(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,RPS_ADDR0))),(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,IER))),__stringify(KBUILD_MODNAME),__FUNCTION__)
//#define DEBUG_PROLOG printk("(0x%08x)(0x%08x) %s: %s(): ",(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,RPS_ADDR0))),(dev==0?-1:(dev->mem==0?-1:saa7146_read(dev,IER))),KBUILD_MODNAME,__FUNCTION__)
#ifndef DEBUG_VARIABLE
#define DEBUG_VARIABLE saa7146_debug
#endif
#define DEBUG_PROLOG printk("%s: %s(): ",__stringify(KBUILD_MODNAME),__FUNCTION__)
#define INFO(x) { printk("%s: ",__stringify(KBUILD_MODNAME)); printk x; }
#define DEBUG_PROLOG printk("%s: %s(): ",KBUILD_MODNAME,__FUNCTION__)
#define INFO(x) { printk("%s: ",KBUILD_MODNAME); printk x; }
#define ERR(x) { DEBUG_PROLOG; printk x; }
......
......@@ -171,7 +171,7 @@ static int __init init(void)
/* Prior to 2.6.11, we had a ports param. No longer, but don't break users. */
static int warn_set(const char *val, struct kernel_param *kp)
{
printk(KERN_INFO __stringify(KBUILD_MODNAME)
printk(KERN_INFO KBUILD_MODNAME
": kernel >= 2.6.10 only uses 'ports' for conntrack modules\n");
return 0;
}
......
......@@ -113,7 +113,7 @@ static int __init init(void)
/* Prior to 2.6.11, we had a ports param. No longer, but don't break users. */
static int warn_set(const char *val, struct kernel_param *kp)
{
printk(KERN_INFO __stringify(KBUILD_MODNAME)
printk(KERN_INFO KBUILD_MODNAME
": kernel >= 2.6.10 only uses 'ports' for conntrack modules\n");
return 0;
}
......
......@@ -133,8 +133,8 @@ HOSTCFLAGS_zconf.tab.o := -I$(src)
HOSTLOADLIBES_qconf = $(KC_QT_LIBS) -ldl
HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK
HOSTLOADLIBES_gconf = `pkg-config gtk+-2.0 gmodule-2.0 libglade-2.0 --libs`
HOSTCFLAGS_gconf.o = `pkg-config gtk+-2.0 gmodule-2.0 libglade-2.0 --cflags` \
HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0`
HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \
-D LKC_DIRECT_LINK
$(obj)/qconf.o: $(obj)/.tmp_qtcheck
......@@ -193,8 +193,8 @@ ifeq ($(gconf-target),1)
# GTK needs some extra effort, too...
$(obj)/.tmp_gtkcheck:
@if `pkg-config gtk+-2.0 gmodule-2.0 libglade-2.0 --exists`; then \
if `pkg-config gtk+-2.0 --atleast-version=2.0.0`; then \
@if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \
if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \
touch $@; \
else \
echo "*"; \
......
#!/usr/bin/perl
# Copyright 2004 - Ryan Anderson <ryan@michonline.com> GPL v2
#!/bin/sh
# Print additional version information for non-release trees.
use strict;
use warnings;
use Digest::MD5;
require 5.006;
if (@ARGV != 1) {
print <<EOT;
Usage: setlocalversion <srctree>
EOT
exit(1);
usage() {
echo "Usage: $0 [srctree]" >&2
exit 1
}
my ($srctree) = @ARGV;
chdir($srctree);
my @LOCALVERSIONS = ();
# We are going to use the following commands to try and determine if this
# repository is at a Version boundary (i.e, 2.6.10 vs 2.6.10 + some patches) We
# currently assume that all meaningful version boundaries are marked by a tag.
# We don't care what the tag is, just that something exists.
# Git/Cogito store the top-of-tree "commit" in .git/HEAD
# A list of known tags sits in .git/refs/tags/
#
# The simple trick here is to just compare the two of these, and if we get a
# match, return nothing, otherwise, return a subset of the SHA-1 hash in
# .git/HEAD
sub do_git_checks {
open(H,"<.git/HEAD") or return;
my $head = <H>;
chomp $head;
close(H);
cd "${1:-.}" || usage
opendir(D,".git/refs/tags") or return;
foreach my $tagfile (grep !/^\.{1,2}$/, readdir(D)) {
open(F,"<.git/refs/tags/" . $tagfile) or return;
my $tag = <F>;
chomp $tag;
close(F);
return if ($tag eq $head);
}
closedir(D);
push @LOCALVERSIONS, "g" . substr($head,0,8);
}
if ( -d ".git") {
do_git_checks();
}
# Check for git and a git repo.
if head=`git rev-parse --verify HEAD 2>/dev/null`; then
# Do we have an untagged version?
if [ "`git name-rev --tags HEAD`" = "HEAD undefined" ]; then
printf '%s%s' -g `echo "$head" | cut -c1-8`
fi
printf "-%s\n", join("-",@LOCALVERSIONS) if (scalar @LOCALVERSIONS > 0);
# Are there uncommitted changes?
if git diff-files | read dummy; then
printf '%s' -git_dirty
fi
fi
......@@ -49,8 +49,6 @@ static struct security_operations capability_ops = {
.vm_enough_memory = cap_vm_enough_memory,
};
#define MY_NAME __stringify(KBUILD_MODNAME)
/* flag to keep track of how we were registered */
static int secondary;
......@@ -67,7 +65,7 @@ static int __init capability_init (void)
/* register ourselves with the security framework */
if (register_security (&capability_ops)) {
/* try registering with primary module */
if (mod_reg_security (MY_NAME, &capability_ops)) {
if (mod_reg_security (KBUILD_MODNAME, &capability_ops)) {
printk (KERN_INFO "Failure registering capabilities "
"with primary security module.\n");
return -EINVAL;
......@@ -85,7 +83,7 @@ static void __exit capability_exit (void)
return;
/* remove ourselves from the security framework */
if (secondary) {
if (mod_unreg_security (MY_NAME, &capability_ops))
if (mod_unreg_security (KBUILD_MODNAME, &capability_ops))
printk (KERN_INFO "Failure unregistering capabilities "
"with primary module.\n");
return;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册