Skip to content

L
linux

xiphi1978 / linux

通知 2
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

提交 32ddf071 编写于 作者: C Christian Lamparter 提交者： John W. Linville
浏览文件
操作

p54: rename prism54xyz -> p54xyz 

It's been a long time, but fullmac prism54 driver is still around...
I think we should rename every prism54* in order to avoid some
confusion about "what is actually what" in the future ;-).

Thanks-to: Maxi <maxi@daemonizer.de>
Signed-off-by: NChristian Lamparter <chunkeey@web.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 6042a3e3
显示空白变更内容
内联 并排
Showing with 47 addition and 47 deletion
drivers/net/wireless/p54/p54.h
浏览文件 @ 32ddf071
#ifndef PRISM54_H
#define PRISM54_H
#ifndef P54_H
#define P54_H
/*
* Shared defines for all mac80211 Prism54 code
......@@ -76,4 +76,4 @@ void p54_fill_eeprom_readback(struct p54_control_hdr *hdr);
struct ieee80211_hw *p54_init_common(size_t priv_data_len);
void p54_free_common(struct ieee80211_hw *dev);
#endif /* PRISM54_H */
#endif /* P54_H */
drivers/net/wireless/p54/p54common.h
浏览文件 @ 32ddf071
#ifndef PRISM54COMMON_H
#define PRISM54COMMON_H
#ifndef P54COMMON_H
#define P54COMMON_H
/*
* Common code specific definitions for mac80211 Prism54 drivers
......@@ -250,4 +250,4 @@ struct p54_tx_control_vdcf {
__le16 frameburst;
} __attribute__ ((packed));
#endif /* PRISM54COMMON_H */
#endif /* P54COMMON_H */
drivers/net/wireless/p54/p54pci.c
浏览文件 @ 32ddf071
......@@ -75,7 +75,7 @@ static int p54p_upload_firmware(struct ieee80211_hw *dev)
err = request_firmware(&fw_entry, "isl3886", &priv->pdev->dev);
if (err) {
printk(KERN_ERR "%s (prism54pci): cannot find firmware "
printk(KERN_ERR "%s (p54pci): cannot find firmware "
"(isl3886)\n", pci_name(priv->pdev));
return err;
}
......@@ -150,16 +150,16 @@ static int p54p_read_eeprom(struct ieee80211_hw *dev)
init_completion(&priv->boot_comp);
err = request_irq(priv->pdev->irq, &p54p_simple_interrupt,
IRQF_SHARED, "prism54pci", priv);
IRQF_SHARED, "p54pci", priv);
if (err) {
printk(KERN_ERR "%s (prism54pci): failed to register IRQ handler\n",
printk(KERN_ERR "%s (p54pci): failed to register IRQ handler\n",
pci_name(priv->pdev));
return err;
}
eeprom = kmalloc(0x2010 + EEPROM_READBACK_LEN, GFP_KERNEL);
if (!eeprom) {
printk(KERN_ERR "%s (prism54pci): no memory for eeprom!\n",
printk(KERN_ERR "%s (p54pci): no memory for eeprom!\n",
pci_name(priv->pdev));
err = -ENOMEM;
goto out;
......@@ -177,7 +177,7 @@ static int p54p_read_eeprom(struct ieee80211_hw *dev)
P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) {
printk(KERN_ERR "%s (prism54pci): Cannot boot firmware!\n",
printk(KERN_ERR "%s (p54pci): Cannot boot firmware!\n",
pci_name(priv->pdev));
err = -EINVAL;
goto out;
......@@ -219,7 +219,7 @@ static int p54p_read_eeprom(struct ieee80211_hw *dev)
alen = le16_to_cpu(ring_control->rx_mgmt[0].len);
if (le32_to_cpu(ring_control->device_idx[2]) != 1 ||
alen < 0x10) {
printk(KERN_ERR "%s (prism54pci): Cannot read eeprom!\n",
printk(KERN_ERR "%s (p54pci): Cannot read eeprom!\n",
pci_name(priv->pdev));
err = -EINVAL;
goto out;
......@@ -412,7 +412,7 @@ static int p54p_open(struct ieee80211_hw *dev)
init_completion(&priv->boot_comp);
err = request_irq(priv->pdev->irq, &p54p_interrupt,
IRQF_SHARED, "prism54pci", dev);
IRQF_SHARED, "p54pci", dev);
if (err) {
printk(KERN_ERR "%s: failed to register IRQ handler\n",
wiphy_name(dev->wiphy));
......@@ -506,7 +506,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
err = pci_enable_device(pdev);
if (err) {
printk(KERN_ERR "%s (prism54pci): Cannot enable new PCI device\n",
printk(KERN_ERR "%s (p54pci): Cannot enable new PCI device\n",
pci_name(pdev));
return err;
}
......@@ -514,22 +514,22 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
mem_addr = pci_resource_start(pdev, 0);
mem_len = pci_resource_len(pdev, 0);
if (mem_len < sizeof(struct p54p_csr)) {
printk(KERN_ERR "%s (prism54pci): Too short PCI resources\n",
printk(KERN_ERR "%s (p54pci): Too short PCI resources\n",
pci_name(pdev));
pci_disable_device(pdev);
return err;
}
err = pci_request_regions(pdev, "prism54pci");
err = pci_request_regions(pdev, "p54pci");
if (err) {
printk(KERN_ERR "%s (prism54pci): Cannot obtain PCI resources\n",
printk(KERN_ERR "%s (p54pci): Cannot obtain PCI resources\n",
pci_name(pdev));
return err;
}
if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) ||
pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_ERR "%s (prism54pci): No suitable DMA available\n",
printk(KERN_ERR "%s (p54pci): No suitable DMA available\n",
pci_name(pdev));
goto err_free_reg;
}
......@@ -542,7 +542,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
dev = p54_init_common(sizeof(*priv));
if (!dev) {
printk(KERN_ERR "%s (prism54pci): ieee80211 alloc failed\n",
printk(KERN_ERR "%s (p54pci): ieee80211 alloc failed\n",
pci_name(pdev));
err = -ENOMEM;
goto err_free_reg;
......@@ -556,7 +556,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
priv->map = ioremap(mem_addr, mem_len);
if (!priv->map) {
printk(KERN_ERR "%s (prism54pci): Cannot map device memory\n",
printk(KERN_ERR "%s (p54pci): Cannot map device memory\n",
pci_name(pdev));
err = -EINVAL; // TODO: use a better error code?
goto err_free_dev;
......@@ -565,7 +565,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
priv->ring_control = pci_alloc_consistent(pdev, sizeof(*priv->ring_control),
&priv->ring_control_dma);
if (!priv->ring_control) {
printk(KERN_ERR "%s (prism54pci): Cannot allocate rings\n",
printk(KERN_ERR "%s (p54pci): Cannot allocate rings\n",
pci_name(pdev));
err = -ENOMEM;
goto err_iounmap;
......@@ -588,7 +588,7 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
err = ieee80211_register_hw(dev);
if (err) {
printk(KERN_ERR "%s (prism54pci): Cannot register netdevice\n",
printk(KERN_ERR "%s (p54pci): Cannot register netdevice\n",
pci_name(pdev));
goto err_free_common;
}
......@@ -673,7 +673,7 @@ static int p54p_resume(struct pci_dev *pdev)
#endif /* CONFIG_PM */
static struct pci_driver p54p_driver = {
.name = "prism54pci",
.name = "p54pci",
.id_table = p54p_table,
.probe = p54p_probe,
.remove = __devexit_p(p54p_remove),
......
drivers/net/wireless/p54/p54pci.h
浏览文件 @ 32ddf071
#ifndef PRISM54PCI_H
#define PRISM54PCI_H
#ifndef P54PCI_H
#define P54PCI_H
/*
* Defines for PCI based mac80211 Prism54 driver
......@@ -68,7 +68,7 @@ struct p54p_csr {
} __attribute__ ((packed));
/* usb backend only needs the register defines above */
#ifndef PRISM54USB_H
#ifndef P54USB_H
struct p54p_desc {
__le32 host_addr;
__le32 device_addr;
......@@ -102,5 +102,5 @@ struct p54p_priv {
struct completion boot_comp;
};
#endif /* PRISM54USB_H */
#endif /* PRISM54PCI_H */
#endif /* P54USB_H */
#endif /* P54PCI_H */
drivers/net/wireless/p54/p54usb.c
浏览文件 @ 32ddf071
......@@ -322,7 +322,7 @@ static int p54u_read_eeprom(struct ieee80211_hw *dev)
buf = kmalloc(0x2020, GFP_KERNEL);
if (!buf) {
printk(KERN_ERR "prism54usb: cannot allocate memory for "
printk(KERN_ERR "p54usb: cannot allocate memory for "
"eeprom readback!\n");
return -ENOMEM;
}
......@@ -331,7 +331,7 @@ static int p54u_read_eeprom(struct ieee80211_hw *dev)
*((u32 *) buf) = priv->common.rx_start;
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32));
if (err) {
printk(KERN_ERR "prism54usb: addr send failed\n");
printk(KERN_ERR "p54usb: addr send failed\n");
goto fail;
}
} else {
......@@ -341,7 +341,7 @@ static int p54u_read_eeprom(struct ieee80211_hw *dev)
reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA);
err = p54u_bulk_msg(priv, P54U_PIPE_DEV, buf, sizeof(*reg));
if (err) {
printk(KERN_ERR "prism54usb: dev_int send failed\n");
printk(KERN_ERR "p54usb: dev_int send failed\n");
goto fail;
}
}
......@@ -359,7 +359,7 @@ static int p54u_read_eeprom(struct ieee80211_hw *dev)
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf,
EEPROM_READBACK_LEN + priv->common.tx_hdr_len);
if (err) {
printk(KERN_ERR "prism54usb: eeprom req send failed\n");
printk(KERN_ERR "p54usb: eeprom req send failed\n");
goto fail;
}
......@@ -369,7 +369,7 @@ static int p54u_read_eeprom(struct ieee80211_hw *dev)
if (!err && alen > offset) {
p54_parse_eeprom(dev, (u8 *)buf + offset, alen - offset);
} else {
printk(KERN_ERR "prism54usb: eeprom read failed!\n");
printk(KERN_ERR "p54usb: eeprom read failed!\n");
err = -EINVAL;
goto fail;
}
......@@ -458,7 +458,7 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_size);
if (err) {
printk(KERN_ERR "prism54usb: firmware upload failed!\n");
printk(KERN_ERR "p54usb: firmware upload failed!\n");
goto err_upload_failed;
}
......@@ -469,7 +469,7 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
*((__le32 *)buf) = cpu_to_le32(~crc32_le(~0, fw_entry->data, fw_entry->size));
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32));
if (err) {
printk(KERN_ERR "prism54usb: firmware upload failed!\n");
printk(KERN_ERR "p54usb: firmware upload failed!\n");
goto err_upload_failed;
}
......@@ -480,13 +480,13 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
break;
if (alen > 5 && !memcmp(buf, "ERROR", 5)) {
printk(KERN_INFO "prism54usb: firmware upload failed!\n");
printk(KERN_INFO "p54usb: firmware upload failed!\n");
err = -EINVAL;
break;
}
if (time_after(jiffies, timeout)) {
printk(KERN_ERR "prism54usb: firmware boot timed out!\n");
printk(KERN_ERR "p54usb: firmware boot timed out!\n");
err = -ETIMEDOUT;
break;
}
......@@ -498,7 +498,7 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
buf[1] = '\r';
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, 2);
if (err) {
printk(KERN_ERR "prism54usb: firmware boot failed!\n");
printk(KERN_ERR "p54usb: firmware boot failed!\n");
goto err_upload_failed;
}
......@@ -660,7 +660,7 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, block_len);
if (err) {
printk(KERN_ERR "prism54usb: firmware block upload "
printk(KERN_ERR "p54usb: firmware block upload "
"failed\n");
goto fail;
}
......@@ -694,7 +694,7 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
0x002C | (unsigned long)&devreg->direct_mem_win);
if (!(reg & cpu_to_le32(ISL38XX_DMA_STATUS_DONE)) ||
!(reg & cpu_to_le32(ISL38XX_DMA_STATUS_READY))) {
printk(KERN_ERR "prism54usb: firmware DMA transfer "
printk(KERN_ERR "p54usb: firmware DMA transfer "
"failed\n");
goto fail;
}
......@@ -802,7 +802,7 @@ static int __devinit p54u_probe(struct usb_interface *intf,
dev = p54_init_common(sizeof(*priv));
if (!dev) {
printk(KERN_ERR "prism54usb: ieee80211 alloc failed\n");
printk(KERN_ERR "p54usb: ieee80211 alloc failed\n");
return -ENOMEM;
}
......@@ -858,7 +858,7 @@ static int __devinit p54u_probe(struct usb_interface *intf,
if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
u8 perm_addr[ETH_ALEN];
printk(KERN_WARNING "prism54usb: Invalid hwaddr! Using randomly generated MAC addr\n");
printk(KERN_WARNING "p54usb: Invalid hwaddr! Using randomly generated MAC addr\n");
random_ether_addr(perm_addr);
SET_IEEE80211_PERM_ADDR(dev, perm_addr);
}
......@@ -867,7 +867,7 @@ static int __devinit p54u_probe(struct usb_interface *intf,
err = ieee80211_register_hw(dev);
if (err) {
printk(KERN_ERR "prism54usb: Cannot register netdevice\n");
printk(KERN_ERR "p54usb: Cannot register netdevice\n");
goto err_free_dev;
}
......@@ -902,7 +902,7 @@ static void __devexit p54u_disconnect(struct usb_interface *intf)
}
static struct usb_driver p54u_driver = {
.name = "prism54usb",
.name = "p54usb",
.id_table = p54u_table,
.probe = p54u_probe,
.disconnect = p54u_disconnect,
......
drivers/net/wireless/p54/p54usb.h
浏览文件 @ 32ddf071
#ifndef PRISM54USB_H
#define PRISM54USB_H
#ifndef P54USB_H
#define P54USB_H
/*
* Defines for USB based mac80211 Prism54 driver
......@@ -130,4 +130,4 @@ struct p54u_priv {
struct sk_buff_head rx_queue;
};
#endif /* PRISM54USB_H */
#endif /* P54USB_H */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或