From cad3cacfa7bd24c8bf7909a95854c7679d5d48a0 Mon Sep 17 00:00:00 2001 From: tanek liang Date: Sat, 22 Jul 2017 11:39:25 +0800 Subject: [PATCH] [bsp] remove unused file, update SConscript and mdk project --- bsp/stm32l476-nucleo/drivers/SConscript | 2 - .../drivers/stm32l4xx_nucleo.c | 1079 ----------------- .../drivers/stm32l4xx_nucleo.h | 364 ------ bsp/stm32l476-nucleo/project.uvprojx | 5 - 4 files changed, 1450 deletions(-) delete mode 100644 bsp/stm32l476-nucleo/drivers/stm32l4xx_nucleo.c delete mode 100644 bsp/stm32l476-nucleo/drivers/stm32l4xx_nucleo.h diff --git a/bsp/stm32l476-nucleo/drivers/SConscript b/bsp/stm32l476-nucleo/drivers/SConscript index c416497b05..c9e2f91b91 100644 --- a/bsp/stm32l476-nucleo/drivers/SConscript +++ b/bsp/stm32l476-nucleo/drivers/SConscript @@ -7,8 +7,6 @@ cwd = os.path.join(str(Dir('#')), 'drivers') # add the general drivers. src = Split(""" board.c -stm32l4xx_it.c -stm32l4xx_nucleo.c usart.c """) diff --git a/bsp/stm32l476-nucleo/drivers/stm32l4xx_nucleo.c b/bsp/stm32l476-nucleo/drivers/stm32l4xx_nucleo.c deleted file mode 100644 index aba632c832..0000000000 --- a/bsp/stm32l476-nucleo/drivers/stm32l4xx_nucleo.c +++ /dev/null @@ -1,1079 +0,0 @@ -/** - ****************************************************************************** - * @file stm32l4xx_nucleo.c - * @author MCD Application Team - * @version V2.1.0 - * @date 16-June-2017 - * @brief This file provides set of firmware functions to manage: - * - LEDs and push-button available on STM32L4XX-Nucleo Kit - * from STMicroelectronics - * - LCD, joystick and microSD available on Adafruit 1.8" TFT LCD - * shield (reference ID 802) - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2015 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_nucleo.h" - -/** @addtogroup BSP - * @{ - */ - -/** @defgroup STM32L4XX_NUCLEO STM32L476RG-Nucleo - * @brief This file provides set of firmware functions to manage Leds and push-button - * available on STM32L4XX-Nucleo Kit from STMicroelectronics. - * It provides also LCD, joystick and uSD functions to communicate with - * Adafruit 1.8" TFT LCD shield (reference ID 802) - * @{ - */ - - -/** @defgroup STM32L4XX_NUCLEO_Private_Defines Private Defines - * @{ - */ - -/** - * @brief STM32L4xx NUCLEO BSP Driver version V2.1.0 - */ -#define __STM32L4XX_NUCLEO_BSP_VERSION_MAIN (0x02) /*!< [31:24] main version */ -#define __STM32L4XX_NUCLEO_BSP_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */ -#define __STM32L4XX_NUCLEO_BSP_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */ -#define __STM32L4XX_NUCLEO_BSP_VERSION_RC (0x00) /*!< [7:0] release candidate */ -#define __STM32L4XX_NUCLEO_BSP_VERSION ((__STM32L4XX_NUCLEO_BSP_VERSION_MAIN << 24)\ - |(__STM32L4XX_NUCLEO_BSP_VERSION_SUB1 << 16)\ - |(__STM32L4XX_NUCLEO_BSP_VERSION_SUB2 << 8 )\ - |(__STM32L4XX_NUCLEO_BSP_VERSION_RC)) - -/** - * @brief LINK SD Card - */ -#define SD_DUMMY_BYTE 0xFF -#define SD_NO_RESPONSE_EXPECTED 0x80 - -/** - * @} - */ - - -#ifdef USE_STM32L4XX_NUCLEO_64_SMPS - -/** - * @brief SMPS - */ - - -#ifdef USE_ADP5301ACBZ /* ADP5301ACBZ */ - -/* ######################################################################## */ -/* #define PORT_SMPS GPIOA */ -/* #define PIN_SMPS_ENABLE GPIO_PIN_4 */ -/* #define PIN_SMPS_POWERGOOD GPIO_PIN_6 */ -/* #define PIN_SMPS_SWITCH_ENABLE GPIO_PIN_7 */ - -/* IN CASE OF SMPS VOLTAGE RANGE SELECTION */ -/* #define PIN_SMPS_V1 GPIO_PIN_5 */ -/* ######################################################################## */ - -#endif /* ADP5301ACBZ */ - -/** - * @} - */ - -#endif /* USE_STM32L4XX_NUCLEO_64_SMPS */ - -/** @defgroup STM32L4XX_NUCLEO_Private_Variables Exported Variables - * @{ - */ -#ifdef USE_STM32L4XX_NUCLEO_64_SMPS -GPIO_TypeDef* GPIO_PORT[LEDn] = {LED4_GPIO_PORT}; -const uint16_t GPIO_PIN[LEDn] = {LED4_PIN}; -#else -GPIO_TypeDef* GPIO_PORT[LEDn] = {LED2_GPIO_PORT}; -const uint16_t GPIO_PIN[LEDn] = {LED2_PIN}; -#endif - -GPIO_TypeDef* BUTTON_PORT[BUTTONn] = {USER_BUTTON_GPIO_PORT}; -const uint16_t BUTTON_PIN[BUTTONn] = {USER_BUTTON_PIN}; -const uint16_t BUTTON_IRQn[BUTTONn] = {USER_BUTTON_EXTI_IRQn}; - -/** - * @brief BUS variables - */ - -#ifdef HAL_SPI_MODULE_ENABLED -uint32_t hnucleo_SpixTimeout = NUCLEO_SPIx_TIMEOUT_MAX; /*PWR_PU_REG, PWR_GPIO_ENABLE))) - { - HAL_PWREx_EnableGPIOPullDown (PWR_GPIO_SMPS, PWR_GPIO_SWITCH_ENABLE); - HAL_PWREx_EnableGPIOPullDown (PWR_GPIO_SMPS, PWR_GPIO_ENABLE); - - /* HW limitation: Level shifter consumes because of dangling, so pull PA2 up - (LPUART1_TX), PA13 (SWD/TMS) and PB3 (SWO) */ - HAL_PWREx_EnableGPIOPullUp(PWR_GPIO_A,GPIO_PIN_2); /* LPUART1_TX */ - HAL_PWREx_EnableGPIOPullUp(PWR_GPIO_A,GPIO_PIN_13); /* SWD/TMS */ - HAL_PWREx_EnableGPIOPullUp(PWR_GPIO_B,GPIO_PIN_3); /* SWO */ - - /* Don't set PWR_CR3 APC bit at this time as it increases power - consumption in non-Standby/Shutdown modes. It will have to be - set with HAL_PWREx_EnablePullUpPullDownConfig() API upon - Standby or Shutdown modes entering */ - } - /* ------------------------------------------------------------------------ */ - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct.Pull = GPIO_PULLUP; - - GPIO_InitStruct.Pin = PIN_SMPS_POWERGOOD; - HAL_GPIO_Init(PORT_SMPS, &GPIO_InitStruct); - - /* ------------------------------------------------------------------------ */ - - GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; - GPIO_InitStruct.Pull = GPIO_NOPULL; - - GPIO_InitStruct.Pin = PIN_SMPS_ENABLE | PIN_SMPS_SWITCH_ENABLE; - HAL_GPIO_Init(PORT_SMPS, &GPIO_InitStruct); - - /* --------- SMPS VOLTAGE RANGE SELECTION ----------------------------------*/ - /* ######################################################################## */ - /* - > Not applicable to ADP5301ACBZ on MB1319 */ - /* ######################################################################## */ - /* - > Applicable to ST1PS02D1QTR */ - /* Control to be added */ - - /* ST1PS02D1QTR on MB1312 */ - /* if (VoltageRange == ST1PS02D1QTR_VOUT_1_25) */ - /* HAL_GPIO_WritePin(PORT_SMPS, PIN_SMPS_V1, GPIO_PIN_SET); */ - /* 1.25V */ - /* D0/D1/D2 = H/L/L */ - /* else */ - - /* */ - /* ST1PS02D1QTR on MB1312 */ - /* ST1PS02D1QTR_VOUT_1_05 */ - /* 1.05V */ - /* D0/D1/D2 = L/L/L */ - /* HAL_GPIO_WritePin(PORT_SMPS, PIN_SMPS_V1, GPIO_PIN_RESET); */ - /* ######################################################################## */ - return SMPS_OK; -} - -/** - * @brief Enable the external SMPS component - * @param Delay: delay in ms after enable - * @param Power_Good_Check: Enable Power good check - * @note Power_Good_Check is not used with all external - * SMPS components - * @retval SMPS status - * @arg SMPS_OK: SMPS ENABLE OK - * @arg SMPS_KO: POWER GOOD CHECK FAILS - */ -uint32_t BSP_SMPS_Enable (uint32_t Delay, uint32_t Power_Good_Check) -{ - PWR_AND_CLK_SMPS(); - - HAL_GPIO_WritePin(PORT_SMPS, PIN_SMPS_ENABLE, GPIO_PIN_SET); - - /* Delay upon request */ - if (Delay != 0) - { - HAL_Delay(Delay); - } - - /* CHECK POWER GOOD or NOT */ - if (Power_Good_Check != 0) - { - if (GPIO_PIN_RESET == (HAL_GPIO_ReadPin(PORT_SMPS, PIN_SMPS_POWERGOOD))) - { - /* POWER GOOD KO */ - return SMPS_KO; - } - } - - /* SMPS ENABLE */ - return SMPS_OK; -} - -/** - * @brief Disable the external SMPS component - * @param NONE - * @note SMPS SWITCH should be disabled first ! - * @retval SMPS status - * @arg SMPS_OK: SMPS DISABLE OK - DONE - * @arg SMPS_KO: POWER GOOD CHECK FAILS - * - */ -uint32_t BSP_SMPS_Disable (void) -{ - - PWR_AND_CLK_SMPS(); - - /* Check if SMPS SWITCH is disabled */ - if (HAL_GPIO_ReadPin(PORT_SMPS, PIN_SMPS_SWITCH_ENABLE) != GPIO_PIN_RESET) - { - /* ERROR AS SWITCH SHOULD BE DISABLE */ - return SMPS_KO; - } - - /* Disable SMPS */ - HAL_GPIO_WritePin(PORT_SMPS, PIN_SMPS_ENABLE, GPIO_PIN_RESET); - - /* SMPS DISABLE */ - return SMPS_OK; -} - -/** - * @brief Enable the external SMPS SWITCH component - * @param Delay: delay in ms before SMPS SWITCH ENABLE - * @param Power_Good_Check: Enable Power good check - * @note Power_Good_Check is not used with all boards - * @retval SMPS status - * @arg SMPS_OK: SMPS ENABLE OK - * @arg SMPS_KO: POWER GOOD CHECK FAILS - */ -uint32_t BSP_SMPS_Supply_Enable (uint32_t Delay, uint32_t Power_Good_Check) -{ - PWR_AND_CLK_SMPS(); - - if (Delay != 0) - { - HAL_Delay(Delay); - } - /* CHECK POWER GOOD or NOT */ - if (Power_Good_Check != 0) - { - if (GPIO_PIN_RESET == (HAL_GPIO_ReadPin(PORT_SMPS, PIN_SMPS_POWERGOOD))) - { - /* POWER GOOD KO */ - return SMPS_KO; - } - } - - /* SMPS SWITCH ENABLE */ - HAL_GPIO_WritePin(PORT_SMPS, PIN_SMPS_SWITCH_ENABLE, GPIO_PIN_SET); - - - return SMPS_OK; -} - -/** - * @brief Disable the external SMPS SWITCH component - * @param None - * @retval SMPS status - * @arg SMPS_OK: SMPS SWITCH DISABLE OK - */ -uint32_t BSP_SMPS_Supply_Disable (void) -{ - PWR_AND_CLK_SMPS(); - /* SMPS SWITCH DISABLE */ - HAL_GPIO_WritePin(PORT_SMPS, PIN_SMPS_SWITCH_ENABLE, GPIO_PIN_RESET); - - return SMPS_OK; -} - -#endif /* ADP5301ACBZ */ -#endif /* USE_STM32L4XX_NUCLEO_64_SMPS */ - - -#ifdef HAL_ADC_MODULE_ENABLED -/** - * @brief Configures joystick available on adafruit 1.8" TFT shield - * managed through ADC to detect motion. - * @retval Joystickstatus (0=> success, 1=> fail) - */ -uint8_t BSP_JOY_Init(void) -{ - if (ADCx_Init() != HAL_OK) - { - return (uint8_t) HAL_ERROR; - } - - /* Select Channel 15 to be converted */ - hnucleo_AdcChannelConfig.Channel = ADC_CHANNEL_15; - hnucleo_AdcChannelConfig.SamplingTime = ADC_SAMPLETIME_24CYCLES_5; - hnucleo_AdcChannelConfig.Rank = 1; - hnucleo_AdcChannelConfig.SingleDiff = ADC_SINGLE_ENDED; - hnucleo_AdcChannelConfig.OffsetNumber = ADC_OFFSET_NONE; - - /* Return Joystick initialization status */ - return (uint8_t) HAL_ADC_ConfigChannel(&hnucleo_Adc, &hnucleo_AdcChannelConfig); -} - -/** - * @brief Returns the Joystick key pressed. - * @note To know which Joystick key is pressed we need to detect the voltage - * level on each key output - * - None : 3.3 V / 4095 - * - SEL : 1.055 V / 1308 - * - DOWN : 0.71 V / 88 - * - LEFT : 3.0 V / 3720 - * - RIGHT : 0.595 V / 737 - * - UP : 1.65 V / 2046 - * @retval JOYState_TypeDef: Code of the Joystick key pressed. - */ -JOYState_TypeDef BSP_JOY_GetState(void) -{ - JOYState_TypeDef state = JOY_NONE; - uint16_t keyconvertedvalue = 0; - - /* Start the conversion process */ - HAL_ADC_Start(&hnucleo_Adc); - - /* Wait for the end of conversion */ - HAL_ADC_PollForConversion(&hnucleo_Adc, 10); - - /* Check if the continous conversion of regular channel is finished */ - if(HAL_ADC_GetState(&hnucleo_Adc) & HAL_ADC_STATE_REG_EOC) - { - /* Get the converted value of regular channel */ - keyconvertedvalue = HAL_ADC_GetValue(&hnucleo_Adc); - } - - if((keyconvertedvalue > 1980) && (keyconvertedvalue < 2120)) - { - state = JOY_UP; - } - else if((keyconvertedvalue > 630) && (keyconvertedvalue < 830)) - { - state = JOY_RIGHT; - } - else if((keyconvertedvalue > 1210) && (keyconvertedvalue < 1410)) - { - state = JOY_SEL; - } - else if((keyconvertedvalue > 20) && (keyconvertedvalue < 160)) - { - state = JOY_DOWN; - } - else if((keyconvertedvalue > 3620) && (keyconvertedvalue < 3820)) - { - state = JOY_LEFT; - } - else - { - state = JOY_NONE; - } - - /* Return the code of the Joystick key pressed*/ - return state; -} - -#endif /* HAL_ADC_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup STM32L4XX_NUCLEO_Private_Functions - * @{ - */ - -#ifdef HAL_SPI_MODULE_ENABLED -/****************************************************************************** - BUS OPERATIONS -*******************************************************************************/ -/** - * @brief Initialize SPI MSP. - * @retval None - */ -static void SPIx_MspInit(void) -{ - GPIO_InitTypeDef gpioinitstruct = {0}; - - /*** Configure the GPIOs ***/ - /* Enable GPIO clock */ - NUCLEO_SPIx_SCK_GPIO_CLK_ENABLE(); - NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_ENABLE(); - - /* Configure SPI SCK */ - gpioinitstruct.Pin = NUCLEO_SPIx_SCK_PIN; - gpioinitstruct.Mode = GPIO_MODE_AF_PP; - gpioinitstruct.Pull = GPIO_PULLUP; - gpioinitstruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - gpioinitstruct.Alternate = NUCLEO_SPIx_SCK_AF; - HAL_GPIO_Init(NUCLEO_SPIx_SCK_GPIO_PORT, &gpioinitstruct); - - /* Configure SPI MISO and MOSI */ - gpioinitstruct.Pin = NUCLEO_SPIx_MOSI_PIN; - gpioinitstruct.Alternate = NUCLEO_SPIx_MISO_MOSI_AF; - gpioinitstruct.Pull = GPIO_PULLDOWN; - HAL_GPIO_Init(NUCLEO_SPIx_MISO_MOSI_GPIO_PORT, &gpioinitstruct); - - gpioinitstruct.Pin = NUCLEO_SPIx_MISO_PIN; - HAL_GPIO_Init(NUCLEO_SPIx_MISO_MOSI_GPIO_PORT, &gpioinitstruct); - - /*** Configure the SPI peripheral ***/ - /* Enable SPI clock */ - NUCLEO_SPIx_CLK_ENABLE(); -} - -/** - * @brief Initialize SPI HAL. - * @retval None - */ -static void SPIx_Init(void) -{ - if(HAL_SPI_GetState(&hnucleo_Spi) == HAL_SPI_STATE_RESET) - { - /* SPI Config */ - hnucleo_Spi.Instance = NUCLEO_SPIx; - /* SPI baudrate is set to 8 MHz maximum (PCLK2/SPI_BaudRatePrescaler = 32/4 = 8 MHz) - to verify these constraints: - - ST7735 LCD SPI interface max baudrate is 15MHz for write and 6.66MHz for read - Since the provided driver doesn't use read capability from LCD, only constraint - on write baudrate is considered. - - SD card SPI interface max baudrate is 25MHz for write/read - - PCLK2 max frequency is 32 MHz - */ - hnucleo_Spi.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_4; - hnucleo_Spi.Init.Direction = SPI_DIRECTION_2LINES; - hnucleo_Spi.Init.CLKPhase = SPI_PHASE_2EDGE; - hnucleo_Spi.Init.CLKPolarity = SPI_POLARITY_HIGH; - hnucleo_Spi.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; - hnucleo_Spi.Init.CRCPolynomial = 7; - hnucleo_Spi.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE; - hnucleo_Spi.Init.DataSize = SPI_DATASIZE_8BIT; - hnucleo_Spi.Init.FirstBit = SPI_FIRSTBIT_MSB; - hnucleo_Spi.Init.NSS = SPI_NSS_SOFT; - hnucleo_Spi.Init.NSSPMode = SPI_NSS_PULSE_DISABLE; - hnucleo_Spi.Init.TIMode = SPI_TIMODE_DISABLE; - hnucleo_Spi.Init.Mode = SPI_MODE_MASTER; - - SPIx_MspInit(); - HAL_SPI_Init(&hnucleo_Spi); - } -} - -/** - * @brief SPI Write byte(s) to device - * @param DataIn: Pointer to data buffer to write - * @param DataOut: Pointer to data buffer for read data - * @param DataLength: number of bytes to write - * @retval None - */ -static void SPIx_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength) -{ - HAL_StatusTypeDef status = HAL_OK; - status = HAL_SPI_TransmitReceive(&hnucleo_Spi, (uint8_t*) DataIn, DataOut, DataLength, hnucleo_SpixTimeout); - - /* Check the communication status */ - if(status != HAL_OK) - { - /* Execute user timeout callback */ - SPIx_Error(); - } -} - -/** - * @brief SPI Write a byte to device - * @param Value: value to be written - * @retval None - */ -static void SPIx_Write(uint8_t Value) -{ - HAL_StatusTypeDef status = HAL_OK; - uint8_t data; - - status = HAL_SPI_TransmitReceive(&hnucleo_Spi, (uint8_t*) &Value, &data, 1, hnucleo_SpixTimeout); - - /* Check the communication status */ - if(status != HAL_OK) - { - /* Execute user timeout callback */ - SPIx_Error(); - } -} - -/** - * @brief SPI error treatment function - * @retval None - */ -static void SPIx_Error (void) -{ - /* De-initialize the SPI communication BUS */ - HAL_SPI_DeInit(&hnucleo_Spi); - - /* Re-Initiaize the SPI communication BUS */ - SPIx_Init(); -} - -/****************************************************************************** - LINK OPERATIONS -*******************************************************************************/ - -/********************************* LINK SD ************************************/ -/** - * @brief Initialize the SD Card and put it into StandBy State (Ready for - * data transfer). - * @retval None - */ -void SD_IO_Init(void) -{ - GPIO_InitTypeDef gpioinitstruct = {0}; - uint8_t counter = 0; - - /* SD_CS_GPIO Periph clock enable */ - SD_CS_GPIO_CLK_ENABLE(); - - /* Configure SD_CS_PIN pin: SD Card CS pin */ - gpioinitstruct.Pin = SD_CS_PIN; - gpioinitstruct.Mode = GPIO_MODE_OUTPUT_PP; - gpioinitstruct.Pull = GPIO_PULLUP; - gpioinitstruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - HAL_GPIO_Init(SD_CS_GPIO_PORT, &gpioinitstruct); - - /* Configure LCD_CS_PIN pin: LCD Card CS pin */ - gpioinitstruct.Pin = LCD_CS_PIN; - gpioinitstruct.Mode = GPIO_MODE_OUTPUT_PP; - gpioinitstruct.Pull = GPIO_NOPULL; - gpioinitstruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - HAL_GPIO_Init(SD_CS_GPIO_PORT, &gpioinitstruct); - LCD_CS_HIGH(); - - /*------------Put SD in SPI mode--------------*/ - /* SD SPI Config */ - SPIx_Init(); - - /* SD chip select high */ - SD_CS_HIGH(); - - /* Send dummy byte 0xFF, 10 times with CS high */ - /* Rise CS and MOSI for 80 clocks cycles */ - for (counter = 0; counter <= 9; counter++) - { - /* Send dummy byte 0xFF */ - SD_IO_WriteByte(SD_DUMMY_BYTE); - } -} - -/** - * @brief Set SD interface Chip Select state - * @param val: 0 (low) or 1 (high) state - * @retval None - */ -void SD_IO_CSState(uint8_t val) -{ - if(val == 1) - { - SD_CS_HIGH(); - } - else - { - SD_CS_LOW(); - } -} - -/** - * @brief Write byte(s) on the SD - * @param DataIn: Pointer to data buffer to write - * @param DataOut: Pointer to data buffer for read data - * @param DataLength: number of bytes to write - * @retval None - */ -void SD_IO_WriteReadData(const uint8_t *DataIn, uint8_t *DataOut, uint16_t DataLength) -{ - /* Send the byte */ - SPIx_WriteReadData(DataIn, DataOut, DataLength); -} - -/** - * @brief Write a byte on the SD. - * @param Data: byte to send. - * @retval Data written - */ -uint8_t SD_IO_WriteByte(uint8_t Data) -{ - uint8_t tmp; - - /* Send the byte */ - SPIx_WriteReadData(&Data,&tmp,1); - return tmp; -} - -/********************************* LINK LCD ***********************************/ -/** - * @brief Initialize the LCD - * @retval None - */ -void LCD_IO_Init(void) -{ - GPIO_InitTypeDef gpioinitstruct = {0}; - - /* LCD_CS_GPIO and LCD_DC_GPIO Periph clock enable */ - LCD_CS_GPIO_CLK_ENABLE(); - LCD_DC_GPIO_CLK_ENABLE(); - - /* Configure LCD_CS_PIN pin: LCD Card CS pin */ - gpioinitstruct.Pin = LCD_CS_PIN; - gpioinitstruct.Mode = GPIO_MODE_OUTPUT_PP; - gpioinitstruct.Pull = GPIO_NOPULL; - gpioinitstruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; - HAL_GPIO_Init(SD_CS_GPIO_PORT, &gpioinitstruct); - - /* Configure LCD_DC_PIN pin: LCD Card DC pin */ - gpioinitstruct.Pin = LCD_DC_PIN; - HAL_GPIO_Init(LCD_DC_GPIO_PORT, &gpioinitstruct); - - /* LCD chip select high */ - LCD_CS_HIGH(); - - /* LCD SPI Config */ - SPIx_Init(); -} - -/** - * @brief Write command to select the LCD register. - * @param LCDReg: Address of the selected register. - * @retval None - */ -void LCD_IO_WriteReg(uint8_t LCDReg) -{ - /* Reset LCD control line CS */ - LCD_CS_LOW(); - - /* Set LCD data/command line DC to Low */ - LCD_DC_LOW(); - - /* Send Command */ - SPIx_Write(LCDReg); - - /* Deselect : Chip Select high */ - LCD_CS_HIGH(); -} - -/** -* @brief Write register value. -* @param pData Pointer on the register value -* @param Size Size of byte to transmit to the register -* @retval None -*/ -void LCD_IO_WriteMultipleData(uint8_t *pData, uint32_t Size) -{ - uint32_t counter = 0; - __IO uint32_t data = 0; - - /* Reset LCD control line CS */ - LCD_CS_LOW(); - - /* Set LCD data/command line DC to High */ - LCD_DC_HIGH(); - - if (Size == 1) - { - /* Only 1 byte to be sent to LCD - general interface can be used */ - /* Send Data */ - SPIx_Write(*pData); - } - else - { - /* Several data should be sent in a raw */ - /* Direct SPI accesses for optimization */ - for (counter = Size; counter != 0; counter--) - { - while(((hnucleo_Spi.Instance->SR) & SPI_FLAG_TXE) != SPI_FLAG_TXE) - { - } - /* Need to invert bytes for LCD*/ - *((__IO uint8_t*)&hnucleo_Spi.Instance->DR) = *(pData+1); - - while(((hnucleo_Spi.Instance->SR) & SPI_FLAG_TXE) != SPI_FLAG_TXE) - { - } - *((__IO uint8_t*)&hnucleo_Spi.Instance->DR) = *pData; - counter--; - pData += 2; - } - - /* Wait until the bus is ready before releasing Chip select */ - while(((hnucleo_Spi.Instance->SR) & SPI_FLAG_BSY) != RESET) - { - } - } - - /* Empty the Rx fifo */ - data = *(&hnucleo_Spi.Instance->DR); - UNUSED(data); /* Remove GNU warning */ - - /* Deselect : Chip Select high */ - LCD_CS_HIGH(); -} - -/** - * @brief Wait for loop in ms. - * @param Delay in ms. - * @retval None - */ -void LCD_Delay(uint32_t Delay) -{ - HAL_Delay(Delay); -} - -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED -/******************************* LINK JOYSTICK ********************************/ -/** - * @brief Initialize ADC MSP. - * @retval None - */ -static void ADCx_MspInit(ADC_HandleTypeDef *hadc) -{ - GPIO_InitTypeDef gpioinitstruct = {0}; - RCC_PeriphCLKInitTypeDef RCC_PeriphCLKInitStruct; - - /*** Configure the GPIOs ***/ - /* Enable GPIO clock */ - NUCLEO_ADCx_GPIO_CLK_ENABLE(); - - /* Configure ADC1 Channel8 as analog input */ - gpioinitstruct.Pin = NUCLEO_ADCx_GPIO_PIN ; - gpioinitstruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL; - gpioinitstruct.Pull = GPIO_NOPULL; - gpioinitstruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(NUCLEO_ADCx_GPIO_PORT, &gpioinitstruct); - - /*** Configure the ADC peripheral ***/ - /* Enable ADC clock */ - NUCLEO_ADCx_CLK_ENABLE(); - - /* Configure SYSCLK as source clock for ADC */ - RCC_PeriphCLKInitStruct.PeriphClockSelection = RCC_PERIPHCLK_ADC; - RCC_PeriphCLKInitStruct.AdcClockSelection = RCC_ADCCLKSOURCE_SYSCLK; - HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphCLKInitStruct); -} - -/** - * @brief Initializes ADC HAL. - * @retval None - */ -static HAL_StatusTypeDef ADCx_Init(void) -{ - if(HAL_ADC_GetState(&hnucleo_Adc) == HAL_ADC_STATE_RESET) - { - /* ADC Config */ - hnucleo_Adc.Instance = NUCLEO_ADCx; - hnucleo_Adc.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV8; /* (must not exceed 16MHz) */ - hnucleo_Adc.Init.Resolution = ADC_RESOLUTION_12B; - hnucleo_Adc.Init.DataAlign = ADC_DATAALIGN_RIGHT; - hnucleo_Adc.Init.ScanConvMode = DISABLE; - hnucleo_Adc.Init.EOCSelection = ADC_EOC_SINGLE_CONV; - hnucleo_Adc.Init.LowPowerAutoWait = ENABLE; - hnucleo_Adc.Init.ContinuousConvMode = DISABLE; - hnucleo_Adc.Init.NbrOfConversion = 1; - hnucleo_Adc.Init.DiscontinuousConvMode = DISABLE; - hnucleo_Adc.Init.NbrOfDiscConversion = 1; - hnucleo_Adc.Init.ExternalTrigConv = ADC_SOFTWARE_START; - hnucleo_Adc.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE; - hnucleo_Adc.Init.DMAContinuousRequests = DISABLE; - hnucleo_Adc.Init.Overrun = ADC_OVR_DATA_PRESERVED; - hnucleo_Adc.Init.OversamplingMode = DISABLE; - - ADCx_MspInit(&hnucleo_Adc); - if (HAL_ADC_Init(&hnucleo_Adc) != HAL_OK) - { - return HAL_ERROR; - } - - if (HAL_ADCEx_Calibration_Start(&hnucleo_Adc,ADC_SINGLE_ENDED) != HAL_OK) - { - return HAL_ERROR; - } - } - - return HAL_OK; -} - -#endif /* HAL_ADC_MODULE_ENABLED */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32l476-nucleo/drivers/stm32l4xx_nucleo.h b/bsp/stm32l476-nucleo/drivers/stm32l4xx_nucleo.h deleted file mode 100644 index bef6f53c3c..0000000000 --- a/bsp/stm32l476-nucleo/drivers/stm32l4xx_nucleo.h +++ /dev/null @@ -1,364 +0,0 @@ -/** - ****************************************************************************** - * @file stm32l4xx_nucleo.h - * @author MCD Application Team - * @version V2.1.0 - * @date 16-June-2017 - * @brief This file contains definitions for: - * - LEDs and push-button available on STM32L4XX-Nucleo Kit - * from STMicroelectronics - * - LCD, joystick and microSD available on Adafruit 1.8" TFT LCD - * shield (reference ID 802) - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2015 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32L4XX_NUCLEO_H -#define __STM32L4XX_NUCLEO_H - -#ifdef __cplusplus - extern "C" { -#endif - -/** @addtogroup BSP - * @{ - */ - -/** @addtogroup STM32L4XX_NUCLEO - * @{ - */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32l4xx_hal.h" - - -/** @defgroup STM32L4XX_NUCLEO_Exported_Types Exported Types - * @{ - */ -#ifdef USE_STM32L4XX_NUCLEO_64_SMPS -typedef enum -{ - LED4 = 0, - - LED_GREEN = LED4 -} Led_TypeDef; -#else -typedef enum -{ - LED2 = 0, - - LED_GREEN = LED2 -} Led_TypeDef; -#endif - -typedef enum -{ - BUTTON_USER = 0, - /* Alias */ - BUTTON_KEY = BUTTON_USER -} Button_TypeDef; - -typedef enum -{ - BUTTON_MODE_GPIO = 0, - BUTTON_MODE_EXTI = 1 -} ButtonMode_TypeDef; - -typedef enum -{ - JOY_NONE = 0, - JOY_SEL = 1, - JOY_DOWN = 2, - JOY_LEFT = 3, - JOY_RIGHT = 4, - JOY_UP = 5 -} JOYState_TypeDef; - -/** - * @} - */ - -/** @defgroup STM32L4XX_NUCLEO_Exported_Constants Exported Constants - * @{ - */ - -/** -* @brief Define for STM32L4XX_NUCLEO board - */ -#if !defined (USE_STM32L4XX_NUCLEO) - #define USE_STM32L4XX_NUCLEO -#endif - -/** @defgroup STM32L4XX_NUCLEO_LED LED Constants - * @{ - */ -#define LEDn 1 -#ifdef USE_STM32L4XX_NUCLEO_64_SMPS -#define LED4_PIN GPIO_PIN_13 -#define LED4_GPIO_PORT GPIOB -#define LED4_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() -#define LED4_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() -#define LEDx_GPIO_CLK_ENABLE(__LED__) do { if((__LED__) == LED4) { LED4_GPIO_CLK_ENABLE(); } } while(0) -#define LEDx_GPIO_CLK_DISABLE(__LED__) do { if((__LED__) == LED4) { LED4_GPIO_CLK_DISABLE(); } } while(0) -#else -#define LED2_PIN GPIO_PIN_5 -#define LED2_GPIO_PORT GPIOA -#define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() -#define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() -#define LEDx_GPIO_CLK_ENABLE(__LED__) do { if((__LED__) == LED2) { LED2_GPIO_CLK_ENABLE(); } } while(0) -#define LEDx_GPIO_CLK_DISABLE(__LED__) do { if((__LED__) == LED2) { LED2_GPIO_CLK_DISABLE(); } } while(0) -#endif - - -/** - * @} - */ - -#ifdef USE_STM32L4XX_NUCLEO_64_SMPS -#ifdef USE_ADP5301ACBZ /* ADP5301ACBZ */ - -/** @addtogroup STM32L4XX_NUCLEO_64_SMPS - * @{ - */ -#define PWR_AND_CLK_SMPS() do { __HAL_RCC_PWR_CLK_ENABLE(); \ - __HAL_RCC_GPIOA_CLK_ENABLE(); } while(0) - -/** - * @} - */ - -#endif /* ADP5301ACBZ */ -#endif /* USE_STM32L4XX_NUCLEO_64_SMPS */ - - -/** @defgroup STM32L4XX_NUCLEO_BUTTON BUTTON Constants - * @{ - */ -#define BUTTONn 1 - -/** - * @brief Key push-button - */ -#define USER_BUTTON_PIN GPIO_PIN_13 -#define USER_BUTTON_GPIO_PORT GPIOC -#define USER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE() -#define USER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE() -#define USER_BUTTON_EXTI_LINE GPIO_PIN_13 -#define USER_BUTTON_EXTI_IRQn EXTI15_10_IRQn -/* Aliases */ -#define KEY_BUTTON_PIN USER_BUTTON_PIN -#define KEY_BUTTON_GPIO_PORT USER_BUTTON_GPIO_PORT -#define KEY_BUTTON_GPIO_CLK_ENABLE() USER_BUTTON_GPIO_CLK_ENABLE() -#define KEY_BUTTON_GPIO_CLK_DISABLE() USER_BUTTON_GPIO_CLK_DISABLE() -#define KEY_BUTTON_EXTI_LINE USER_BUTTON_EXTI_LINE -#define KEY_BUTTON_EXTI_IRQn USER_BUTTON_EXTI_IRQn - - -#define BUTTONx_GPIO_CLK_ENABLE(__BUTTON__) do { if((__BUTTON__) == BUTTON_USER) { USER_BUTTON_GPIO_CLK_ENABLE(); } } while(0) - -#define BUTTONx_GPIO_CLK_DISABLE(__BUTTON__) do { if((__BUTTON__) == BUTTON_USER) { USER_BUTTON_GPIO_CLK_DISABLE(); } } while(0) -/** - * @} - */ - -/** @addtogroup STM32L4XX_NUCLEO_BUS BUS Constants - * @{ - */ -/*###################### SPI1 ###################################*/ -#define NUCLEO_SPIx SPI1 -#define NUCLEO_SPIx_CLK_ENABLE() __HAL_RCC_SPI1_CLK_ENABLE() - -#define NUCLEO_SPIx_SCK_AF GPIO_AF5_SPI1 -#define NUCLEO_SPIx_SCK_GPIO_PORT GPIOA -#define NUCLEO_SPIx_SCK_PIN GPIO_PIN_5 -#define NUCLEO_SPIx_SCK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() -#define NUCLEO_SPIx_SCK_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() - -#define NUCLEO_SPIx_MISO_MOSI_AF GPIO_AF5_SPI1 -#define NUCLEO_SPIx_MISO_MOSI_GPIO_PORT GPIOA -#define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() -#define NUCLEO_SPIx_MISO_MOSI_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() -#define NUCLEO_SPIx_MISO_PIN GPIO_PIN_6 -#define NUCLEO_SPIx_MOSI_PIN GPIO_PIN_7 -/* Maximum Timeout values for flags waiting loops. These timeouts are not based - on accurate values, they just guarantee that the application will not remain - stuck if the SPI communication is corrupted. - You may modify these timeout values depending on CPU frequency and application - conditions (interrupts routines ...). */ -#define NUCLEO_SPIx_TIMEOUT_MAX 1000 - - -/** - * @brief SD Control Lines management - */ -#define SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_RESET) -#define SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_PORT, SD_CS_PIN, GPIO_PIN_SET) - -/** - * @brief LCD Control Lines management - */ -#define LCD_CS_LOW() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_RESET) -#define LCD_CS_HIGH() HAL_GPIO_WritePin(LCD_CS_GPIO_PORT, LCD_CS_PIN, GPIO_PIN_SET) -#define LCD_DC_LOW() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_RESET) -#define LCD_DC_HIGH() HAL_GPIO_WritePin(LCD_DC_GPIO_PORT, LCD_DC_PIN, GPIO_PIN_SET) - -/** - * @brief SD Control Interface pins - */ -#define SD_CS_PIN GPIO_PIN_5 -#define SD_CS_GPIO_PORT GPIOB -#define SD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() -#define SD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() - -/** - * @brief LCD Control Interface pins - */ -#define LCD_CS_PIN GPIO_PIN_6 -#define LCD_CS_GPIO_PORT GPIOB -#define LCD_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() -#define LCD_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() - -/** - * @brief LCD Data/Command Interface pins - */ -#define LCD_DC_PIN GPIO_PIN_9 -#define LCD_DC_GPIO_PORT GPIOA -#define LCD_DC_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() -#define LCD_DC_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() - -/*##################### ADC1 ###################################*/ -/** - * @brief ADC Interface pins - * used to detect motion of Joystick available on Adafruit 1.8" TFT shield - */ -#define NUCLEO_ADCx ADC1 -#define NUCLEO_ADCx_CLK_ENABLE() __HAL_RCC_ADC_CLK_ENABLE() - -#define NUCLEO_ADCx_GPIO_PORT GPIOB -#define NUCLEO_ADCx_GPIO_PIN GPIO_PIN_0 -#define NUCLEO_ADCx_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() -#define NUCLEO_ADCx_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() - -/*##################### SMPS###################################*/ -#ifdef USE_STM32L4XX_NUCLEO_64_SMPS - -#ifdef USE_ADP5301ACBZ /* ADP5301ACBZ */ -#define PORT_SMPS GPIOA -#define PIN_SMPS_ENABLE GPIO_PIN_4 -#define PIN_SMPS_V1 GPIO_PIN_5 -#define PIN_SMPS_POWERGOOD GPIO_PIN_6 -#define PIN_SMPS_SWITCH_ENABLE GPIO_PIN_7 - -#define PWR_GPIO_SMPS PWR_GPIO_A -#define PWR_GPIO_ENABLE PWR_GPIO_BIT_4 -#define PWR_GPIO_SWITCH_ENABLE PWR_GPIO_BIT_7 -#define PWR_PU_REG PUCRA - -#define NUCLEO_SMPS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() -#define NUCLEO_SMPS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOA_CLK_DISABLE() - -#endif /* ADP5301ACBZ */ - -#endif /* USE_STM32L4XX_NUCLEO_64_SMPS */ - -/** - * @} - */ - -/** - * @} - */ - -/** @addtogroup STM32L4XX_NUCLEO_Exported_Functions - * @{ - */ -uint32_t BSP_GetVersion(void); - -/** @addtogroup STM32L4XX_NUCLEO_LED_Functions - * @{ - */ -void BSP_LED_Init(Led_TypeDef Led); -void BSP_LED_On(Led_TypeDef Led); -void BSP_LED_Off(Led_TypeDef Led); -void BSP_LED_Toggle(Led_TypeDef Led); -/** - * @} - */ - -/** @addtogroup STM32L4XX_NUCLEO_BUTTON_Functions - * @{ - */ -void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode); -uint32_t BSP_PB_GetState(Button_TypeDef Button); -#ifdef HAL_ADC_MODULE_ENABLED -uint8_t BSP_JOY_Init(void); -JOYState_TypeDef BSP_JOY_GetState(void); -#endif /* HAL_ADC_MODULE_ENABLED */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef USE_STM32L4XX_NUCLEO_64_SMPS - -/** - * @brief SMPS OK-KO - */ -#define SMPS_OK 0 -#define SMPS_KO 1 - -uint32_t BSP_SMPS_DeInit(void); -uint32_t BSP_SMPS_Init(uint32_t VoltageRange); -uint32_t BSP_SMPS_Enable(uint32_t Delay, uint32_t Power_Good_Check); -uint32_t BSP_SMPS_Disable(void); -uint32_t BSP_SMPS_Supply_Enable(uint32_t Delay, uint32_t Power_Good_Check); -uint32_t BSP_SMPS_Supply_Disable(void); -#endif /* USE_STM32L4XX_NUCLEO_64_SMPS */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32L4XX_NUCLEO_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - diff --git a/bsp/stm32l476-nucleo/project.uvprojx b/bsp/stm32l476-nucleo/project.uvprojx index f89b1d858a..e99fba942b 100644 --- a/bsp/stm32l476-nucleo/project.uvprojx +++ b/bsp/stm32l476-nucleo/project.uvprojx @@ -399,11 +399,6 @@ 1 drivers\board.c - - stm32l4xx_nucleo.c - 1 - drivers\stm32l4xx_nucleo.c - usart.c 1 -- GitLab