Skip to content

R
rt-thread

weixin_46254178 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 1
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

未验证 提交 8bcc2d12 编写于 作者: B Bernard Xiong 提交者： GitHub
浏览文件
操作

Merge pull request #2285 from balanceTWK/rtt_master 

[BSP] Fixed imxrt1050 gpio driver | 修复 imxrt1050 gpio 驱动
上级 d68c0f22 e7c5fa13
隐藏空白更改
内联 并排
Showing with 294 addition and 290 deletion
bsp/imxrt/Libraries/imxrt1050/drivers/drv_pin.c
浏览文件 @ 8bcc2d12
......@@ -8,41 +8,41 @@
* 2018-03-13 Liuguang the first version.
* 2018-03-19 Liuguang add GPIO interrupt mode support.
*/
#include "drv_pin.h"
#include "drv_pin.h"
#include "fsl_common.h"
#include "fsl_iomuxc.h"
#include "fsl_gpio.h"
#include "fsl_common.h"
#include "fsl_iomuxc.h"
#include "fsl_gpio.h"
#ifdef RT_USING_PIN
#if defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL
#error "Please don't define 'FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL'!"
#error "Please don't define 'FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL'!"
#endif
struct rt1052_pin
{
rt_uint16_t pin;
GPIO_Type *gpio;
rt_uint32_t gpio_pin;
};
rt_uint16_t pin;
GPIO_Type *gpio;
rt_uint32_t gpio_pin;
};
struct rt1052_irq
{
rt_uint16_t enable;
struct rt_pin_irq_hdr irq_info;
rt_uint16_t enable;
struct rt_pin_irq_hdr irq_info;
};
#define __ARRAY_LEN(array) (sizeof(array)/sizeof(array[0]))
#define __RT1052_PIN_DEFAULT {0, 0, 0}
#define __RT1052_PIN(INDEX, PORT, PIN) {INDEX, PORT, PIN}
#define __ARRAY_LEN(array) (sizeof(array)/sizeof(array[0]))
#define __RT1052_PIN_DEFAULT {0, 0, 0}
#define __RT1052_PIN(INDEX, PORT, PIN) {INDEX, PORT, PIN}
static struct rt_pin_ops rt1052_pin_ops;
static struct rt_pin_ops rt1052_pin_ops;
static struct rt1052_pin rt1052_pin_map[] =
static struct rt1052_pin rt1052_pin_map[] =
{
__RT1052_PIN_DEFAULT,
__RT1052_PIN_DEFAULT,
/* GPIO4 */
__RT1052_PIN( 1, GPIO4, 0), /* GPIO_EMC_00 */
__RT1052_PIN( 2, GPIO4, 1), /* GPIO_EMC_01 */
......@@ -76,7 +76,7 @@ static struct rt1052_pin rt1052_pin_map[] =
__RT1052_PIN(30, GPIO4, 29), /* GPIO_EMC_29 */
__RT1052_PIN(31, GPIO4, 30), /* GPIO_EMC_30 */
__RT1052_PIN(32, GPIO4, 31), /* GPIO_EMC_31 */
__RT1052_PIN(33, GPIO3, 18), /* GPIO_EMC_32 */
__RT1052_PIN(34, GPIO3, 19), /* GPIO_EMC_33 */
__RT1052_PIN(35, GPIO3, 20), /* GPIO_EMC_34 */
......@@ -86,10 +86,10 @@ static struct rt1052_pin rt1052_pin_map[] =
__RT1052_PIN(39, GPIO3, 24), /* GPIO_EMC_38 */
__RT1052_PIN(40, GPIO3, 25), /* GPIO_EMC_39 */
__RT1052_PIN(41, GPIO3, 26), /* GPIO_EMC_40 */
__RT1052_PIN(42, GPIO3, 27), /* GPIO_EMC_41 */
__RT1052_PIN(42, GPIO3, 27), /* GPIO_EMC_41 */
/* GPIO1 */
__RT1052_PIN(43, GPIO1, 0), /* GPIO_AD_B0_00 */
__RT1052_PIN(43, GPIO1, 0), /* GPIO_AD_B0_00 */
__RT1052_PIN(44, GPIO1, 1), /* GPIO_AD_B0_01 */
__RT1052_PIN(45, GPIO1, 2), /* GPIO_AD_B0_02 */
__RT1052_PIN(46, GPIO1, 3), /* GPIO_AD_B0_03 */
......@@ -155,7 +155,7 @@ static struct rt1052_pin rt1052_pin_map[] =
__RT1052_PIN(104, GPIO2, 29), /* GPIO_B1_13 */
__RT1052_PIN(105, GPIO2, 30), /* GPIO_B1_14 */
__RT1052_PIN(106, GPIO2, 31), /* GPIO_B1_15 */
/* GPIO3 */
__RT1052_PIN(107, GPIO3, 0), /* GPIO_SD_B1_00 */
__RT1052_PIN(108, GPIO3, 1), /* GPIO_SD_B1_01 */
......@@ -180,9 +180,9 @@ static struct rt1052_pin rt1052_pin_map[] =
__RT1052_PIN(125, GPIO5, 0), /* WAKEUP */
__RT1052_PIN(126, GPIO5, 1), /* PMIC_ON_REQ */
__RT1052_PIN(127, GPIO5, 2) /* PMIC_STBY_REQ */
};
};
static struct rt1052_irq rt1052_irq_map[] =
static struct rt1052_irq rt1052_irq_map[] =
{
{PIN_IRQ_DISABLE, {PIN_IRQ_PIN_NONE, PIN_IRQ_MODE_RISING, RT_NULL, RT_NULL} },
{PIN_IRQ_DISABLE, {PIN_IRQ_PIN_NONE, PIN_IRQ_MODE_RISING, RT_NULL, RT_NULL} },
......@@ -216,15 +216,15 @@ static struct rt1052_irq rt1052_irq_map[] =
{PIN_IRQ_DISABLE, {PIN_IRQ_PIN_NONE, PIN_IRQ_MODE_RISING, RT_NULL, RT_NULL} },
{PIN_IRQ_DISABLE, {PIN_IRQ_PIN_NONE, PIN_IRQ_MODE_RISING, RT_NULL, RT_NULL} },
{PIN_IRQ_DISABLE, {PIN_IRQ_PIN_NONE, PIN_IRQ_MODE_RISING, RT_NULL, RT_NULL} }
};
};
void gpio_isr(GPIO_Type* base, rt_uint32_t gpio_pin)
void gpio_isr(GPIO_Type *base, rt_uint32_t gpio_pin)
{
if((GPIO_PortGetInterruptFlags(base) & (1 << gpio_pin)) != 0)
if ((GPIO_PortGetInterruptFlags(base) & (1 << gpio_pin)) != 0)
{
GPIO_PortClearInterruptFlags(base, gpio_pin);
if(rt1052_irq_map[gpio_pin].irq_info.hdr != RT_NULL)
GPIO_PortClearInterruptFlags(base, (1 << gpio_pin));
if (rt1052_irq_map[gpio_pin].irq_info.hdr != RT_NULL)
{
rt1052_irq_map[gpio_pin].irq_info.hdr(rt1052_irq_map[gpio_pin].irq_info.args);
}
......@@ -233,124 +233,124 @@ void gpio_isr(GPIO_Type* base, rt_uint32_t gpio_pin)
void GPIO1_Combined_0_15_IRQHandler(void)
{
rt_uint8_t gpio_pin;
rt_uint8_t gpio_pin;
rt_interrupt_enter();
for(gpio_pin = 0; gpio_pin <= 15; gpio_pin++)
for (gpio_pin = 0; gpio_pin <= 15; gpio_pin++)
{
gpio_isr(GPIO1, gpio_pin);
gpio_isr(GPIO1, gpio_pin);
}
rt_interrupt_leave();
}
void GPIO1_Combined_16_31_IRQHandler(void)
{
rt_uint8_t gpio_pin;
rt_uint8_t gpio_pin;
rt_interrupt_enter();
for(gpio_pin = 16; gpio_pin <= 31; gpio_pin++)
for (gpio_pin = 16; gpio_pin <= 31; gpio_pin++)
{
gpio_isr(GPIO1, gpio_pin);
gpio_isr(GPIO1, gpio_pin);
}
rt_interrupt_leave();
}
void GPIO2_Combined_0_15_IRQHandler(void)
{
rt_uint8_t gpio_pin;
rt_uint8_t gpio_pin;
rt_interrupt_enter();
for(gpio_pin = 0; gpio_pin <= 15; gpio_pin++)
for (gpio_pin = 0; gpio_pin <= 15; gpio_pin++)
{
gpio_isr(GPIO2, gpio_pin);
gpio_isr(GPIO2, gpio_pin);
}
rt_interrupt_leave();
}
void GPIO2_Combined_16_31_IRQHandler(void)
{
rt_uint8_t gpio_pin;
rt_uint8_t gpio_pin;
rt_interrupt_enter();
for(gpio_pin = 16; gpio_pin <= 31; gpio_pin++)
for (gpio_pin = 16; gpio_pin <= 31; gpio_pin++)
{
gpio_isr(GPIO2, gpio_pin);
gpio_isr(GPIO2, gpio_pin);
}
rt_interrupt_leave();
}
void GPIO3_Combined_0_15_IRQHandler(void)
void GPIO3_Combined_0_15_IRQHandler(void)
{
rt_uint8_t gpio_pin;
rt_uint8_t gpio_pin;
rt_interrupt_enter();
for(gpio_pin = 0; gpio_pin <= 15; gpio_pin++)
for (gpio_pin = 0; gpio_pin <= 15; gpio_pin++)
{
gpio_isr(GPIO3, gpio_pin);
gpio_isr(GPIO3, gpio_pin);
}
rt_interrupt_leave();
}
void GPIO3_Combined_16_31_IRQHandler(void)
{
rt_uint8_t gpio_pin;
rt_uint8_t gpio_pin;
rt_interrupt_enter();
for(gpio_pin = 16; gpio_pin <= 31; gpio_pin++)
for (gpio_pin = 16; gpio_pin <= 31; gpio_pin++)
{
gpio_isr(GPIO3, gpio_pin);
gpio_isr(GPIO3, gpio_pin);
}
rt_interrupt_leave();
}
void GPIO4_Combined_0_15_IRQHandler(void)
{
rt_uint8_t gpio_pin;
rt_uint8_t gpio_pin;
rt_interrupt_enter();
for(gpio_pin = 0; gpio_pin <= 15; gpio_pin++)
for (gpio_pin = 0; gpio_pin <= 15; gpio_pin++)
{
gpio_isr(GPIO4, gpio_pin);
gpio_isr(GPIO4, gpio_pin);
}
rt_interrupt_leave();
}
void GPIO4_Combined_16_31_IRQHandler(void)
{
rt_uint8_t gpio_pin;
rt_uint8_t gpio_pin;
rt_interrupt_enter();
for(gpio_pin = 16; gpio_pin <= 31; gpio_pin++)
for (gpio_pin = 16; gpio_pin <= 31; gpio_pin++)
{
gpio_isr(GPIO4, gpio_pin);
gpio_isr(GPIO4, gpio_pin);
}
rt_interrupt_leave();
}
void GPIO5_Combined_0_15_IRQHandler(void)
{
rt_uint8_t gpio_pin;
{
rt_uint8_t gpio_pin;
rt_interrupt_enter();
for(gpio_pin = 0; gpio_pin <= 2; gpio_pin++)
for (gpio_pin = 0; gpio_pin <= 2; gpio_pin++)
{
gpio_isr(GPIO5, gpio_pin);
gpio_isr(GPIO5, gpio_pin);
}
rt_interrupt_leave();
......@@ -359,143 +359,143 @@ void GPIO5_Combined_0_15_IRQHandler(void)
static IRQn_Type rt1052_get_irqnum(GPIO_Type *gpio, rt_uint32_t gpio_pin)
{
IRQn_Type irq_num = NotAvail_IRQn; /* Invalid interrupt number */
if(gpio == GPIO1)
if (gpio == GPIO1)
{
if(gpio_pin <= 15)
if (gpio_pin <= 15)
{
irq_num = GPIO1_Combined_0_15_IRQn;
irq_num = GPIO1_Combined_0_15_IRQn;
}
else
{
irq_num = GPIO1_Combined_16_31_IRQn;
irq_num = GPIO1_Combined_16_31_IRQn;
}
}
else if(gpio == GPIO2)
else if (gpio == GPIO2)
{
if(gpio_pin <= 15)
if (gpio_pin <= 15)
{
irq_num = GPIO2_Combined_0_15_IRQn;
irq_num = GPIO2_Combined_0_15_IRQn;
}
else
{
irq_num = GPIO2_Combined_16_31_IRQn;
irq_num = GPIO2_Combined_16_31_IRQn;
}
}
else if(gpio == GPIO3)
else if (gpio == GPIO3)
{
if(gpio_pin <= 15)
if (gpio_pin <= 15)
{
irq_num = GPIO3_Combined_0_15_IRQn;
irq_num = GPIO3_Combined_0_15_IRQn;
}
else
{
irq_num = GPIO3_Combined_16_31_IRQn;
irq_num = GPIO3_Combined_16_31_IRQn;
}
}
else if(gpio == GPIO4)
else if (gpio == GPIO4)
{
if(gpio_pin <= 15)
if (gpio_pin <= 15)
{
irq_num = GPIO4_Combined_0_15_IRQn;
irq_num = GPIO4_Combined_0_15_IRQn;
}
else
{
irq_num = GPIO4_Combined_16_31_IRQn;
irq_num = GPIO4_Combined_16_31_IRQn;
}
}
else if(gpio == GPIO5)
else if (gpio == GPIO5)
{
if(gpio_pin <= 15)
if (gpio_pin <= 15)
{
irq_num = GPIO5_Combined_0_15_IRQn;
irq_num = GPIO5_Combined_0_15_IRQn;
}
else
{
irq_num = GPIO5_Combined_16_31_IRQn;
irq_num = GPIO5_Combined_16_31_IRQn;
}
}
return irq_num;
return irq_num;
}
static void rt1052_pin_mode(rt_device_t dev, rt_base_t pin, rt_base_t mode)
{
gpio_pin_config_t gpio;
rt_uint32_t config_value = 0;
if((pin > __ARRAY_LEN(rt1052_pin_map)) || (pin == 0))
gpio_pin_config_t gpio;
rt_uint32_t config_value = 0;
if ((pin > __ARRAY_LEN(rt1052_pin_map)) || (pin == 0))
{
return;
return;
}
if(rt1052_pin_map[pin].gpio != GPIO5)
if (rt1052_pin_map[pin].gpio != GPIO5)
{
CLOCK_EnableClock(kCLOCK_Iomuxc);
IOMUXC_SetPinMux(0x401F8010U + pin*4, 0x5U, 0, 0, 0, 1);
CLOCK_EnableClock(kCLOCK_Iomuxc);
IOMUXC_SetPinMux(0x401F8010U + pin * 4, 0x5U, 0, 0, 0, 1);
}
else
{
CLOCK_EnableClock(kCLOCK_IomuxcSnvs);
IOMUXC_SetPinMux(0x400A8000U + (pin-125)*4, 0x5U, 0, 0, 0, 1);
CLOCK_EnableClock(kCLOCK_IomuxcSnvs);
IOMUXC_SetPinMux(0x400A8000U + (pin - 125) * 4, 0x5U, 0, 0, 0, 1);
}
gpio.outputLogic = 0;
gpio.interruptMode = kGPIO_NoIntmode;
switch(mode)
gpio.outputLogic = 0;
gpio.interruptMode = kGPIO_NoIntmode;
switch (mode)
{
case PIN_MODE_OUTPUT:
{
config_value = 0x1030U;
gpio.direction = kGPIO_DigitalOutput;
}
break;
case PIN_MODE_INPUT:
{
config_value = 0x1030U;
gpio.direction = kGPIO_DigitalInput;
}
break;
case PIN_MODE_INPUT_PULLDOWN:
{
config_value = 0x1030U;
gpio.direction = kGPIO_DigitalInput;
}
break;
case PIN_MODE_INPUT_PULLUP:
{
config_value = 0x5030U;
gpio.direction = kGPIO_DigitalInput;
}
break;
case PIN_MODE_OUTPUT_OD:
{
config_value = 0x1830U;
gpio.direction = kGPIO_DigitalOutput;
}
break;
case PIN_MODE_OUTPUT:
{
config_value = 0x0030U;/* Drive Strength R0/6 */
gpio.direction = kGPIO_DigitalOutput;
}
break;
case PIN_MODE_INPUT:
{
config_value = 0x0830U;/* Open Drain Enable */
gpio.direction = kGPIO_DigitalInput;
}
break;
case PIN_MODE_INPUT_PULLDOWN:
{
config_value = 0x3030U;/* 100K Ohm Pull Down */
gpio.direction = kGPIO_DigitalInput;
}
break;
case PIN_MODE_INPUT_PULLUP:
{
config_value = 0xB030U;/* 100K Ohm Pull Up */
gpio.direction = kGPIO_DigitalInput;
}
break;
case PIN_MODE_OUTPUT_OD:
{
config_value = 0x0830U;/* Open Drain Enable */
gpio.direction = kGPIO_DigitalOutput;
}
break;
}
if(rt1052_pin_map[pin].gpio != GPIO5)
if (rt1052_pin_map[pin].gpio != GPIO5)
{
IOMUXC_SetPinConfig(0, 0, 0, 0, 0x401F8200U + pin*4, config_value);
IOMUXC_SetPinConfig(0, 0, 0, 0, 0x401F8200U + pin * 4, config_value);
}
else
{
IOMUXC_SetPinConfig(0, 0, 0, 0, 0x400A8018U + (pin-125)*4, config_value);
IOMUXC_SetPinConfig(0, 0, 0, 0, 0x400A8018U + (pin - 125) * 4, config_value);
}
GPIO_PinInit(rt1052_pin_map[pin].gpio, rt1052_pin_map[pin].gpio_pin, &gpio);
GPIO_PinInit(rt1052_pin_map[pin].gpio, rt1052_pin_map[pin].gpio_pin, &gpio);
}
static int rt1052_pin_read(rt_device_t dev, rt_base_t pin)
{
return GPIO_PinReadPadStatus(rt1052_pin_map[pin].gpio, rt1052_pin_map[pin].gpio_pin);
return GPIO_PinReadPadStatus(rt1052_pin_map[pin].gpio, rt1052_pin_map[pin].gpio_pin);
}
static void rt1052_pin_write(rt_device_t dev, rt_base_t pin, rt_base_t value)
......@@ -504,188 +504,192 @@ static void rt1052_pin_write(rt_device_t dev, rt_base_t pin, rt_base_t value)
}
static rt_err_t rt1052_pin_attach_irq(struct rt_device *device, rt_int32_t pin,
rt_uint32_t mode, void (*hdr)(void *args), void *args)
rt_uint32_t mode, void (*hdr)(void *args), void *args)
{
struct rt1052_pin* pin_map = RT_NULL;
struct rt1052_irq* irq_map = RT_NULL;
pin_map = &rt1052_pin_map[pin];
irq_map = &rt1052_irq_map[rt1052_pin_map[pin].gpio_pin];
if(pin_map == RT_NULL || irq_map == RT_NULL)
{
return RT_ENOSYS;
}
if(irq_map->enable == PIN_IRQ_ENABLE)
{
return RT_EBUSY;
}
irq_map->irq_info.pin = pin;
irq_map->irq_info.hdr = hdr;
irq_map->irq_info.mode = mode;
irq_map->irq_info.args = args;
struct rt1052_pin *pin_map = RT_NULL;
struct rt1052_irq *irq_map = RT_NULL;
pin_map = &rt1052_pin_map[pin];
irq_map = &rt1052_irq_map[rt1052_pin_map[pin].gpio_pin];
if (pin_map == RT_NULL || irq_map == RT_NULL)
{
return RT_ENOSYS;
}
if (irq_map->enable == PIN_IRQ_ENABLE)
{
return RT_EBUSY;
}
irq_map->irq_info.pin = pin;
irq_map->irq_info.hdr = hdr;
irq_map->irq_info.mode = mode;
irq_map->irq_info.args = args;
return RT_EOK;
}
static rt_err_t rt1052_pin_detach_irq(struct rt_device *device, rt_int32_t pin)
{
struct rt1052_pin* pin_map = RT_NULL;
struct rt1052_irq* irq_map = RT_NULL;
pin_map = &rt1052_pin_map[pin];
irq_map = &rt1052_irq_map[rt1052_pin_map[pin].gpio_pin];
if(pin_map == RT_NULL || irq_map == RT_NULL)
{
return RT_ENOSYS;
}
if(irq_map->enable == PIN_IRQ_DISABLE)
{
return RT_EOK;
}
irq_map->irq_info.pin = PIN_IRQ_PIN_NONE;
irq_map->irq_info.hdr = RT_NULL;
irq_map->irq_info.mode = PIN_IRQ_MODE_RISING;
irq_map->irq_info.args = RT_NULL;
struct rt1052_pin *pin_map = RT_NULL;
struct rt1052_irq *irq_map = RT_NULL;
pin_map = &rt1052_pin_map[pin];
irq_map = &rt1052_irq_map[rt1052_pin_map[pin].gpio_pin];
if (pin_map == RT_NULL || irq_map == RT_NULL)
{
return RT_ENOSYS;
}
if (irq_map->enable == PIN_IRQ_DISABLE)
{
return RT_EOK;
}
irq_map->irq_info.pin = PIN_IRQ_PIN_NONE;
irq_map->irq_info.hdr = RT_NULL;
irq_map->irq_info.mode = PIN_IRQ_MODE_RISING;
irq_map->irq_info.args = RT_NULL;
return RT_EOK;
}
static rt_err_t rt1052_pin_irq_enable(struct rt_device *device, rt_base_t pin, rt_uint32_t enabled)
{
gpio_pin_config_t gpio;
gpio_pin_config_t gpio;
IRQn_Type irq_num;
rt_uint32_t config_value = 0x1b0a0;
struct rt1052_pin* pin_map = RT_NULL;
struct rt1052_irq* irq_map = RT_NULL;
pin_map = &rt1052_pin_map[pin];
irq_map = &rt1052_irq_map[rt1052_pin_map[pin].gpio_pin];
if(pin_map == RT_NULL || irq_map == RT_NULL)
{
return RT_ENOSYS;
}
if(enabled == PIN_IRQ_ENABLE)
{
if(irq_map->enable == PIN_IRQ_ENABLE)
rt_uint32_t config_value = 0;
struct rt1052_pin *pin_map = RT_NULL;
struct rt1052_irq *irq_map = RT_NULL;
pin_map = &rt1052_pin_map[pin];
irq_map = &rt1052_irq_map[rt1052_pin_map[pin].gpio_pin];
if (pin_map == RT_NULL || irq_map == RT_NULL)
{
return RT_ENOSYS;
}
if (enabled == PIN_IRQ_ENABLE)
{
if (irq_map->enable == PIN_IRQ_ENABLE)
{
return RT_EBUSY;
return RT_EBUSY;
}
if(irq_map->irq_info.pin != pin)
if (irq_map->irq_info.pin != pin)
{
return RT_EIO;
return RT_EIO;
}
irq_map->enable = PIN_IRQ_ENABLE;
if(rt1052_pin_map[pin].gpio != GPIO5)
irq_map->enable = PIN_IRQ_ENABLE;
if (rt1052_pin_map[pin].gpio != GPIO5)
{
CLOCK_EnableClock(kCLOCK_Iomuxc);
IOMUXC_SetPinMux(0x401F8010U + pin*4, 0x5U, 0, 0, 0, 0);
CLOCK_EnableClock(kCLOCK_Iomuxc);
IOMUXC_SetPinMux(0x401F8010U + pin * 4, 0x5U, 0, 0, 0, 1);
}
else
{
CLOCK_EnableClock(kCLOCK_IomuxcSnvs);
IOMUXC_SetPinMux(0x400A8000U + (pin-125)*4, 0x5U, 0, 0, 0, 0);
CLOCK_EnableClock(kCLOCK_IomuxcSnvs);
IOMUXC_SetPinMux(0x400A8000U + (pin - 125) * 4, 0x5U, 0, 0, 0, 1);
}
gpio.direction = kGPIO_DigitalInput;
gpio.outputLogic = 0;
switch(irq_map->irq_info.mode)
gpio.direction = kGPIO_DigitalInput;
gpio.outputLogic = 0;
switch (irq_map->irq_info.mode)
{
case PIN_IRQ_MODE_RISING:
{
gpio.interruptMode = kGPIO_IntRisingEdge;
}
break;
case PIN_IRQ_MODE_FALLING:
{
gpio.interruptMode = kGPIO_IntFallingEdge;
}
break;
case PIN_IRQ_MODE_RISING_FALLING:
{
gpio.interruptMode = kGPIO_IntRisingOrFallingEdge;
}
break;
case PIN_IRQ_MODE_HIGH_LEVEL:
{
gpio.interruptMode = kGPIO_IntHighLevel;
}
break;
case PIN_IRQ_MODE_LOW_LEVEL:
{
gpio.interruptMode = kGPIO_IntLowLevel;
}
break;
case PIN_IRQ_MODE_RISING:
{
config_value = 0x3030U;/* 100K Ohm Pull Down */
gpio.interruptMode = kGPIO_IntRisingEdge;
}
break;
case PIN_IRQ_MODE_FALLING:
{
config_value = 0xB030U;/* 100K Ohm Pull Up */
gpio.interruptMode = kGPIO_IntFallingEdge;
}
if(rt1052_pin_map[pin].gpio != GPIO5)
break;
case PIN_IRQ_MODE_RISING_FALLING:
{
config_value = 0x0830U;/* Open Drain Enable */
gpio.interruptMode = kGPIO_IntRisingOrFallingEdge;
}
break;
case PIN_IRQ_MODE_HIGH_LEVEL:
{
config_value = 0x3030U;/* 100K Ohm Pull Down */
gpio.interruptMode = kGPIO_IntHighLevel;
}
break;
case PIN_IRQ_MODE_LOW_LEVEL:
{
IOMUXC_SetPinConfig(0, 0, 0, 0, 0x401F8200U + pin*4, config_value);
config_value = 0xB030U;/* 100K Ohm Pull Up */
gpio.interruptMode = kGPIO_IntLowLevel;
}
break;
}
if (rt1052_pin_map[pin].gpio != GPIO5)
{
IOMUXC_SetPinConfig(0, 0, 0, 0, 0x401F8200U + pin * 4, config_value);
}
else
{
IOMUXC_SetPinConfig(0, 0, 0, 0, 0x400A8018U + (pin-125)*4, config_value);
IOMUXC_SetPinConfig(0, 0, 0, 0, 0x400A8018U + (pin - 125) * 4, config_value);
}
irq_num = rt1052_get_irqnum(rt1052_pin_map[pin].gpio, rt1052_pin_map[pin].gpio_pin);
irq_num = rt1052_get_irqnum(rt1052_pin_map[pin].gpio, rt1052_pin_map[pin].gpio_pin);
NVIC_SetPriority(irq_num, NVIC_EncodePriority(NVIC_GetPriorityGrouping(), 5, 0));
EnableIRQ(irq_num);
GPIO_PinInit(rt1052_pin_map[pin].gpio, rt1052_pin_map[pin].gpio_pin, &gpio);
GPIO_PortEnableInterrupts(rt1052_pin_map[pin].gpio, 1U << rt1052_pin_map[pin].gpio_pin);
GPIO_PinInit(rt1052_pin_map[pin].gpio, rt1052_pin_map[pin].gpio_pin, &gpio);
GPIO_PortEnableInterrupts(rt1052_pin_map[pin].gpio, 1U << rt1052_pin_map[pin].gpio_pin);
}
else if(enabled == PIN_IRQ_DISABLE)
else if (enabled == PIN_IRQ_DISABLE)
{
if(irq_map->enable == PIN_IRQ_DISABLE)
if (irq_map->enable == PIN_IRQ_DISABLE)
{
return RT_EOK;
return RT_EOK;
}
irq_map->enable = PIN_IRQ_DISABLE;
irq_num = rt1052_get_irqnum(rt1052_pin_map[pin].gpio, rt1052_pin_map[pin].gpio_pin);
irq_num = rt1052_get_irqnum(rt1052_pin_map[pin].gpio, rt1052_pin_map[pin].gpio_pin);
NVIC_DisableIRQ(irq_num);
}
else
{
return RT_EINVAL;
return RT_EINVAL;
}
return RT_EOK;
}
int rt_hw_pin_init(void)
{
int ret = RT_EOK;
rt1052_pin_ops.pin_mode = rt1052_pin_mode;
rt1052_pin_ops.pin_read = rt1052_pin_read;
rt1052_pin_ops.pin_write = rt1052_pin_write;
rt1052_pin_ops.pin_attach_irq = rt1052_pin_attach_irq;
int ret = RT_EOK;
rt1052_pin_ops.pin_mode = rt1052_pin_mode;
rt1052_pin_ops.pin_read = rt1052_pin_read;
rt1052_pin_ops.pin_write = rt1052_pin_write;
rt1052_pin_ops.pin_attach_irq = rt1052_pin_attach_irq;
rt1052_pin_ops.pin_detach_irq = rt1052_pin_detach_irq;
rt1052_pin_ops.pin_irq_enable = rt1052_pin_irq_enable;
rt1052_pin_ops.pin_irq_enable = rt1052_pin_irq_enable;
ret = rt_device_pin_register("pin", &rt1052_pin_ops, RT_NULL);
return ret;
}
INIT_BOARD_EXPORT(rt_hw_pin_init);
INIT_BOARD_EXPORT(rt_hw_pin_init);
#endif /*RT_USING_PIN */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或