/*
 * File      : mmcsd_host.h
 * This file is part of RT-Thread RTOS
 * COPYRIGHT (C) 2006, RT-Thread Development Team
 *
 * The license and distribution terms for this file may be
 * found in the file LICENSE in this distribution or at
 * http://www.rt-thread.org/license/LICENSE
 *
 * Change Logs:
 * Date           Author		Notes
 * 2011-07-25     weety		first version
 */

#ifndef __HOST_H__
#define __HOST_H__

#include <rtthread.h>

#ifdef __cplusplus
extern "C" {
#endif

struct rt_mmcsd_io_cfg {
	rt_uint32_t	clock;			/* clock rate */
	rt_uint16_t	vdd;

/* vdd stores the bit number of the selected voltage range from below. */

	rt_uint8_t	bus_mode;		/* command output mode */

#define MMCSD_BUSMODE_OPENDRAIN	1
#define MMCSD_BUSMODE_PUSHPULL	2

	rt_uint8_t	chip_select;		/* SPI chip select */

#define MMCSD_CS_IGNORE		0
#define MMCSD_CS_HIGH		1
#define MMCSD_CS_LOW		2

	rt_uint8_t	power_mode;		/* power supply mode */

#define MMCSD_POWER_OFF		0
#define MMCSD_POWER_UP		1
#define MMCSD_POWER_ON		2

	rt_uint8_t	bus_width;		/* data bus width */

#define MMCSD_BUS_WIDTH_1		0
#define MMCSD_BUS_WIDTH_4		2
#define MMCSD_BUS_WIDTH_8		3

};

struct rt_mmcsd_host;
struct rt_mmcsd_req;

struct rt_mmcsd_host_ops {
	void (*request)(struct rt_mmcsd_host *host, struct rt_mmcsd_req *req);
	void (*set_iocfg)(struct rt_mmcsd_host *host, struct rt_mmcsd_io_cfg *io_cfg);
	rt_int32_t (*get_card_status)(struct rt_mmcsd_host *host);
};

struct rt_mmcsd_host {
	struct rt_mmcsd_card *card;
	const struct rt_mmcsd_host_ops *ops;
	rt_uint32_t  freq_min;
	rt_uint32_t  freq_max;
	struct rt_mmcsd_io_cfg io_cfg;
	rt_uint32_t  valid_ocr;	/* current valid OCR */
#define VDD_165_195		(1 << 7)	/* VDD voltage 1.65 - 1.95 */
#define VDD_20_21		(1 << 8)	/* VDD voltage 2.0 ~ 2.1 */
#define VDD_21_22		(1 << 9)	/* VDD voltage 2.1 ~ 2.2 */
#define VDD_22_23		(1 << 10)	/* VDD voltage 2.2 ~ 2.3 */
#define VDD_23_24		(1 << 11)	/* VDD voltage 2.3 ~ 2.4 */
#define VDD_24_25		(1 << 12)	/* VDD voltage 2.4 ~ 2.5 */
#define VDD_25_26		(1 << 13)	/* VDD voltage 2.5 ~ 2.6 */
#define VDD_26_27		(1 << 14)	/* VDD voltage 2.6 ~ 2.7 */
#define VDD_27_28		(1 << 15)	/* VDD voltage 2.7 ~ 2.8 */
#define VDD_28_29		(1 << 16)	/* VDD voltage 2.8 ~ 2.9 */
#define VDD_29_30		(1 << 17)	/* VDD voltage 2.9 ~ 3.0 */
#define VDD_30_31		(1 << 18)	/* VDD voltage 3.0 ~ 3.1 */
#define VDD_31_32		(1 << 19)	/* VDD voltage 3.1 ~ 3.2 */
#define VDD_32_33		(1 << 20)	/* VDD voltage 3.2 ~ 3.3 */
#define VDD_33_34		(1 << 21)	/* VDD voltage 3.3 ~ 3.4 */
#define VDD_34_35		(1 << 22)	/* VDD voltage 3.4 ~ 3.5 */
#define VDD_35_36		(1 << 23)	/* VDD voltage 3.5 ~ 3.6 */
	rt_uint32_t  flags; /* define device capabilities */
#define MMCSD_BUSWIDTH_4	(1 << 0)
#define MMCSD_BUSWIDTH_8	(1 << 1)
#define MMCSD_MUTBLKWRITE	(1 << 2)
#define MMCSD_HOST_IS_SPI	(1 << 3)
#define controller_is_spi(host)	(host->flags & MMCSD_HOST_IS_SPI)
	rt_uint32_t   spi_use_crc;
	struct rt_semaphore  bus_lock;
	struct rt_semaphore  sem_ack;

	void *private_data;
};

rt_inline void mmcsd_delay_ms(rt_uint32_t ms)
{
	if (ms < 1000 / RT_TICK_PER_SECOND) 
	{
		rt_thread_delay(1);
	} 
	else 
	{
		rt_thread_delay(ms/(1000 / RT_TICK_PER_SECOND));
	}
}

#ifdef __cplusplus
}
#endif

#endif