Merge pull request #2283 from jinsheng20/stm32f746-disco

Stm32f746 disco

bsp/stm32/stm32f746-st-disco/.config

@@ -206,6 +206,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_LJSON is not set
 # CONFIG_PKG_USING_EZXML is not set
 # CONFIG_PKG_USING_NANOPB is not set
+# CONFIG_PKG_USING_GAGENT_CLOUD is not set
 
 #
 # Wi-Fi
@@ -223,15 +224,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_COAP is not set
 # CONFIG_PKG_USING_NOPOLL is not set
 # CONFIG_PKG_USING_NETUTILS is not set
-# CONFIG_PKG_USING_AT_DEVICE is not set
-
-#
-# IoT Cloud
-#
 # CONFIG_PKG_USING_ONENET is not set
-# CONFIG_PKG_USING_GAGENT_CLOUD is not set
-# CONFIG_PKG_USING_ALI_IOTKIT is not set
-# CONFIG_PKG_USING_AZURE is not set
 
 #
 # security packages
@@ -243,7 +236,6 @@ CONFIG_RT_USING_PIN=y
 #
 # language packages
 #
-# CONFIG_PKG_USING_LUA is not set
 # CONFIG_PKG_USING_JERRYSCRIPT is not set
 # CONFIG_PKG_USING_MICROPYTHON is not set
 
@@ -281,16 +273,10 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_PKG_USING_STM32F4_HAL is not set
 # CONFIG_PKG_USING_STM32F4_DRIVERS is not set
 # CONFIG_PKG_USING_REALTEK_AMEBA is not set
-# CONFIG_PKG_USING_SHT2X is not set
-# CONFIG_PKG_USING_AHT10 is not set
-# CONFIG_PKG_USING_AP3216C is not set
-# CONFIG_PKG_USING_STM32_SDIO is not set
 
 #
 # miscellaneous packages
 #
-# CONFIG_PKG_USING_LIBCSV is not set
-# CONFIG_PKG_USING_OPTPARSE is not set
 # CONFIG_PKG_USING_FASTLZ is not set
 # CONFIG_PKG_USING_MINILZO is not set
 # CONFIG_PKG_USING_QUICKLZ is not set
@@ -302,14 +288,7 @@ CONFIG_RT_USING_PIN=y
 #
 # sample package
 #
-
-#
-# samples: kernel and components samples
-#
-# CONFIG_PKG_USING_KERNEL_SAMPLES is not set
-# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
-# CONFIG_PKG_USING_NETWORK_SAMPLES is not set
-# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
+# CONFIG_PKG_USING_SAMPLES is not set
 
 #
 # example package: hello
@@ -327,6 +306,7 @@ CONFIG_SOC_STM32F746NG=y
 # Onboard Peripheral Drivers
 #
 CONFIG_BSP_USING_USB_TO_USART=y
+# CONFIG_BSP_USING_QSPI_FLASH is not set
 
 #
 # On-chip Peripheral Drivers
@@ -335,6 +315,7 @@ CONFIG_BSP_USING_GPIO=y
 CONFIG_BSP_USING_UART=y
 CONFIG_BSP_USING_UART1=y
 # CONFIG_BSP_UART1_RX_USING_DMA is not set
+# CONFIG_BSP_USING_QSPI is not set
 
 #
 # Board extended module Drivers

bsp/stm32/stm32f746-st-disco/README.md

@@ -35,21 +35,23 @@ STM32F746-disco 是 ST 推出的一款基于 ARM Cortex-M7 内核的开发板，
 ## 外设支持
 
 本 BSP 目前对外设的支持情况如下：
+
 | **板载外设**      | **支持情况** | **备注**                              |
 | :----------------- | :----------: | :------------------------------------- |
 | USB 转串口   |     支持     |              UART1                  |
-| QSPI Flash        |   暂不支持    |                                       |
+| QSPI Flash        |   支持    |                                       |
 | 以太网            |   暂不支持    |                               |
 | SDRAM             |  暂不支持     |                                       |
 | SD卡              |   暂不支持   |                           |
 | 4.3寸电容屏       |   暂不支持   |                               |
 | MEMS麦克风        |   暂不支持   |                               |
+
 | **片上外设** | **支持情况** |               **备注**                |
-| :------------ | :----------: | :-----------------------------------: |
+| :----------------- | :----------: | :------------------------------------- |
 | GPIO         |     支持     |   PA0, PA1... PK7 ---> PIN: 0, 1...168 |
 | UART         |     支持     |              UART1                  |
 | SPI               |  暂不支持    | 即将支持                        |
-| QSPI              |  暂不支持    | 即将支持                        |
+| QSPI              |  支持    | QSPI1                        |
 | I2C               |  暂不支持    | 即将支持                        |
 | FLASH             |  暂不支持    | 即将支持                        |
 | WDT               |  暂不支持    | 即将支持                        |
@@ -94,10 +96,11 @@ STM32F746-disco 是 ST 推出的一款基于 ARM Cortex-M7 内核的开发板，
 ```bash
  \ | /
 - RT -     Thread Operating System
- / | \     4.0.0 build Dec 10 2018
+ / | \     4.0.0 build Jan 30 2019
  2006 - 2018 Copyright by rt-thread team
 msh >
 ```
+
 ### 进阶使用
 
 此 BSP 默认只开启了 GPIO 和 串口1 的功能，更多高级功能，需要利用 ENV 工具对 BSP 进行配置，步骤如下：

bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/.mxproject

@@ -5,9 +5,9 @@ SourcePath=E:/rt-thread/bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/Src
 SourceFiles=stm32f7xx_it.c;stm32f7xx_hal_msp.c;main.c;
 
 [PreviousLibFiles]
-LibFiles=Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f746xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;
+LibFiles=Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_qspi.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_qspi.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_qspi.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f746xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h;
 
 [PreviousUsedKeilFiles]
-SourceFiles=..\Src\main.c;..\Src\stm32f7xx_it.c;..\Src\stm32f7xx_hal_msp.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;../\Src/system_stm32f7xx.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;../\Src/system_stm32f7xx.c;../Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;null;
+SourceFiles=..\Src\main.c;..\Src\stm32f7xx_it.c;..\Src\stm32f7xx_hal_msp.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_qspi.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;../\Src/system_stm32f7xx.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_qspi.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;../\Src/system_stm32f7xx.c;../Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;null;
 HeaderPath=..\Drivers\STM32F7xx_HAL_Driver\Inc;..\Drivers\STM32F7xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F7xx\Include;..\Drivers\CMSIS\Include;..\Inc;
 

bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/CubeMX_Config.ioc

@@ -4,22 +4,31 @@ KeepUserPlacement=false
 Mcu.Family=STM32F7
 Mcu.IP0=CORTEX_M7
 Mcu.IP1=NVIC
-Mcu.IP2=RCC
-Mcu.IP3=SYS
-Mcu.IP4=USART1
-Mcu.IPNb=5
+Mcu.IP2=QUADSPI
+Mcu.IP3=RCC
+Mcu.IP4=SYS
+Mcu.IP5=USART1
+Mcu.IPNb=6
 Mcu.Name=STM32F746NGHx
 Mcu.Package=TFBGA216
-Mcu.Pin0=PA14
-Mcu.Pin1=PA13
-Mcu.Pin2=PB7
-Mcu.Pin3=PC14/OSC32_IN
-Mcu.Pin4=PA9
-Mcu.Pin5=PC15/OSC32_OUT
-Mcu.Pin6=PH0/OSC_IN
-Mcu.Pin7=PH1/OSC_OUT
-Mcu.Pin8=VP_SYS_VS_Systick
-Mcu.PinsNb=9
+Mcu.Pin0=PE2
+Mcu.Pin1=PA14
+Mcu.Pin10=PH1/OSC_OUT
+Mcu.Pin11=PJ8
+Mcu.Pin12=PB2
+Mcu.Pin13=PD12
+Mcu.Pin14=PD13
+Mcu.Pin15=PD11
+Mcu.Pin16=VP_SYS_VS_Systick
+Mcu.Pin2=PA13
+Mcu.Pin3=PB7
+Mcu.Pin4=PB6
+Mcu.Pin5=PC14/OSC32_IN
+Mcu.Pin6=PA9
+Mcu.Pin7=PC15/OSC32_OUT
+Mcu.Pin8=PK1
+Mcu.Pin9=PH0/OSC_IN
+Mcu.PinsNb=17
 Mcu.ThirdPartyNb=0
 Mcu.UserConstants=
 Mcu.UserName=STM32F746NGHx
@@ -42,6 +51,10 @@ PA14.Signal=SYS_JTCK-SWCLK
 PA9.Locked=true
 PA9.Mode=Asynchronous
 PA9.Signal=USART1_TX
+PB2.Mode=Single Bank 1
+PB2.Signal=QUADSPI_CLK
+PB6.Mode=Single Bank 1
+PB6.Signal=QUADSPI_BK1_NCS
 PB7.Mode=Asynchronous
 PB7.Signal=USART1_RX
 PC14/OSC32_IN.Mode=LSE-External-Oscillator
@@ -56,10 +69,26 @@ PCC.Seq0=0
 PCC.Series=STM32F7
 PCC.Temperature=25
 PCC.Vdd=3.3
+PD11.Locked=true
+PD11.Mode=Single Bank 1
+PD11.Signal=QUADSPI_BK1_IO0
+PD12.Locked=true
+PD12.Mode=Single Bank 1
+PD12.Signal=QUADSPI_BK1_IO1
+PD13.Locked=true
+PD13.Mode=Single Bank 1
+PD13.Signal=QUADSPI_BK1_IO3
+PE2.Locked=true
+PE2.Mode=Single Bank 1
+PE2.Signal=QUADSPI_BK1_IO2
 PH0/OSC_IN.Mode=HSE-External-Oscillator
 PH0/OSC_IN.Signal=RCC_OSC_IN
 PH1/OSC_OUT.Mode=HSE-External-Oscillator
 PH1/OSC_OUT.Signal=RCC_OSC_OUT
+PJ8.Locked=true
+PJ8.Signal=GPXTI8
+PK1.Locked=true
+PK1.Signal=EVENTOUT
 PinOutPanel.CurrentBGAView=Top
 PinOutPanel.RotationAngle=0
 ProjectManager.AskForMigrate=true
@@ -88,7 +117,12 @@ ProjectManager.StackSize=0x400
 ProjectManager.TargetToolchain=MDK-ARM V5
 ProjectManager.ToolChainLocation=
 ProjectManager.UnderRoot=false
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_CORTEX_M7_Init-CORTEX_M7-false-HAL-true,4-MX_USART1_UART_Init-USART1-false-HAL-true,5-MX_QUADSPI_Init-QUADSPI-false-HAL-true
+QUADSPI.ChipSelectHighTime=QSPI_CS_HIGH_TIME_6_CYCLE
+QUADSPI.ClockPrescaler=1
+QUADSPI.FifoThreshold=4
+QUADSPI.IPParameters=ClockPrescaler,FifoThreshold,SampleShifting,ChipSelectHighTime
+QUADSPI.SampleShifting=QSPI_SAMPLE_SHIFTING_HALFCYCLE
 RCC.AHBFreq_Value=216000000
 RCC.APB1CLKDivider=RCC_HCLK_DIV4
 RCC.APB1Freq_Value=54000000
@@ -148,6 +182,8 @@ RCC.VCOI2SOutputFreq_Value=192000000
 RCC.VCOInputFreq_Value=1000000
 RCC.VCOOutputFreq_Value=432000000
 RCC.VCOSAIOutputFreq_Value=192000000
+SH.GPXTI8.0=GPIO_EXTI8
+SH.GPXTI8.ConfNb=1
 USART1.IPParameters=VirtualMode-Asynchronous
 USART1.VirtualMode-Asynchronous=VM_ASYNC
 VP_SYS_VS_Systick.Mode=SysTick

bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/Inc/stm32f7xx_hal_conf.h

@@ -68,7 +68,7 @@
 /* #define HAL_IWDG_MODULE_ENABLED   */
 /* #define HAL_LPTIM_MODULE_ENABLED   */
 /* #define HAL_LTDC_MODULE_ENABLED   */
-/* #define HAL_QSPI_MODULE_ENABLED   */
+#define HAL_QSPI_MODULE_ENABLED
 /* #define HAL_RNG_MODULE_ENABLED   */
 /* #define HAL_RTC_MODULE_ENABLED   */
 /* #define HAL_SAI_MODULE_ENABLED   */

bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/Src/main.c

@@ -63,6 +63,8 @@
 
 /* Private variables ---------------------------------------------------------*/
 
+QSPI_HandleTypeDef hqspi;
+
 UART_HandleTypeDef huart1;
 
 /* USER CODE BEGIN PV */
@@ -73,6 +75,7 @@ UART_HandleTypeDef huart1;
 void SystemClock_Config(void);
 static void MX_GPIO_Init(void);
 static void MX_USART1_UART_Init(void);
+static void MX_QUADSPI_Init(void);
 /* USER CODE BEGIN PFP */
 
 /* USER CODE END PFP */
@@ -111,6 +114,7 @@ int main(void)
   /* Initialize all configured peripherals */
   MX_GPIO_Init();
   MX_USART1_UART_Init();
+  MX_QUADSPI_Init();
   /* USER CODE BEGIN 2 */
 
   /* USER CODE END 2 */
@@ -184,6 +188,41 @@ void SystemClock_Config(void)
   }
 }
 
+/**
+  * @brief QUADSPI Initialization Function
+  * @param None
+  * @retval None
+  */
+static void MX_QUADSPI_Init(void)
+{
+
+  /* USER CODE BEGIN QUADSPI_Init 0 */
+
+  /* USER CODE END QUADSPI_Init 0 */
+
+  /* USER CODE BEGIN QUADSPI_Init 1 */
+
+  /* USER CODE END QUADSPI_Init 1 */
+  /* QUADSPI parameter configuration*/
+  hqspi.Instance = QUADSPI;
+  hqspi.Init.ClockPrescaler = 1;
+  hqspi.Init.FifoThreshold = 4;
+  hqspi.Init.SampleShifting = QSPI_SAMPLE_SHIFTING_HALFCYCLE;
+  hqspi.Init.FlashSize = 1;
+  hqspi.Init.ChipSelectHighTime = QSPI_CS_HIGH_TIME_6_CYCLE;
+  hqspi.Init.ClockMode = QSPI_CLOCK_MODE_0;
+  hqspi.Init.FlashID = QSPI_FLASH_ID_1;
+  hqspi.Init.DualFlash = QSPI_DUALFLASH_DISABLE;
+  if (HAL_QSPI_Init(&hqspi) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN QUADSPI_Init 2 */
+
+  /* USER CODE END QUADSPI_Init 2 */
+
+}
+
 /**
   * @brief USART1 Initialization Function
   * @param None
@@ -226,12 +265,31 @@ static void MX_USART1_UART_Init(void)
   */
 static void MX_GPIO_Init(void)
 {
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
 
   /* GPIO Ports Clock Enable */
+  __HAL_RCC_GPIOE_CLK_ENABLE();
   __HAL_RCC_GPIOA_CLK_ENABLE();
   __HAL_RCC_GPIOB_CLK_ENABLE();
   __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOK_CLK_ENABLE();
   __HAL_RCC_GPIOH_CLK_ENABLE();
+  __HAL_RCC_GPIOJ_CLK_ENABLE();
+  __HAL_RCC_GPIOD_CLK_ENABLE();
+
+  /*Configure GPIO pin : PK1 */
+  GPIO_InitStruct.Pin = GPIO_PIN_1;
+  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+  GPIO_InitStruct.Alternate = GPIO_AF15_EVENTOUT;
+  HAL_GPIO_Init(GPIOK, &GPIO_InitStruct);
+
+  /*Configure GPIO pin : PJ8 */
+  GPIO_InitStruct.Pin = GPIO_PIN_8;
+  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOJ, &GPIO_InitStruct);
 
 }
 

bsp/stm32/stm32f746-st-disco/board/CubeMX_Config/Src/stm32f7xx_hal_msp.c

@@ -97,6 +97,109 @@ void HAL_MspInit(void)
   /* USER CODE END MspInit 1 */
 }
 
+/**
+* @brief QSPI MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hqspi: QSPI handle pointer
+* @retval None
+*/
+void HAL_QSPI_MspInit(QSPI_HandleTypeDef* hqspi)
+{
+
+  GPIO_InitTypeDef GPIO_InitStruct = {0};
+  if(hqspi->Instance==QUADSPI)
+  {
+  /* USER CODE BEGIN QUADSPI_MspInit 0 */
+
+  /* USER CODE END QUADSPI_MspInit 0 */
+    /* Peripheral clock enable */
+    __HAL_RCC_QSPI_CLK_ENABLE();
+  
+    __HAL_RCC_GPIOE_CLK_ENABLE();
+    __HAL_RCC_GPIOB_CLK_ENABLE();
+    __HAL_RCC_GPIOD_CLK_ENABLE();
+    /**QUADSPI GPIO Configuration    
+    PE2     ------> QUADSPI_BK1_IO2
+    PB6     ------> QUADSPI_BK1_NCS
+    PB2     ------> QUADSPI_CLK
+    PD12     ------> QUADSPI_BK1_IO1
+    PD13     ------> QUADSPI_BK1_IO3
+    PD11     ------> QUADSPI_BK1_IO0 
+    */
+    GPIO_InitStruct.Pin = GPIO_PIN_2;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF9_QUADSPI;
+    HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_6;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF10_QUADSPI;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_2;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF9_QUADSPI;
+    HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+    GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_11;
+    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+    GPIO_InitStruct.Pull = GPIO_NOPULL;
+    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+    GPIO_InitStruct.Alternate = GPIO_AF9_QUADSPI;
+    HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+  /* USER CODE BEGIN QUADSPI_MspInit 1 */
+
+  /* USER CODE END QUADSPI_MspInit 1 */
+  }
+
+}
+
+/**
+* @brief QSPI MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hqspi: QSPI handle pointer
+* @retval None
+*/
+
+void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi)
+{
+
+  if(hqspi->Instance==QUADSPI)
+  {
+  /* USER CODE BEGIN QUADSPI_MspDeInit 0 */
+
+  /* USER CODE END QUADSPI_MspDeInit 0 */
+    /* Peripheral clock disable */
+    __HAL_RCC_QSPI_CLK_DISABLE();
+  
+    /**QUADSPI GPIO Configuration    
+    PE2     ------> QUADSPI_BK1_IO2
+    PB6     ------> QUADSPI_BK1_NCS
+    PB2     ------> QUADSPI_CLK
+    PD12     ------> QUADSPI_BK1_IO1
+    PD13     ------> QUADSPI_BK1_IO3
+    PD11     ------> QUADSPI_BK1_IO0 
+    */
+    HAL_GPIO_DeInit(GPIOE, GPIO_PIN_2);
+
+    HAL_GPIO_DeInit(GPIOB, GPIO_PIN_6|GPIO_PIN_2);
+
+    HAL_GPIO_DeInit(GPIOD, GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_11);
+
+  /* USER CODE BEGIN QUADSPI_MspDeInit 1 */
+
+  /* USER CODE END QUADSPI_MspDeInit 1 */
+  }
+
+}
+
 /**
 * @brief UART MSP Initialization
 * This function configures the hardware resources used in this example

bsp/stm32/stm32f746-st-disco/board/Kconfig

@@ -11,6 +11,12 @@ menu "Onboard Peripheral Drivers"
         select BSP_USING_UART
         select BSP_USING_UART1
         default y
+    config BSP_USING_QSPI_FLASH
+        bool "Enable QSPI FLASH (N25Q256 qspi1)"
+        select BSP_USING_QSPI
+        select RT_USING_SFUD
+        select RT_SFUD_USING_QSPI
+        default n
 
 endmenu
 
@@ -20,7 +26,6 @@ menu "On-chip Peripheral Drivers"
         bool "Enable GPIO"
         select RT_USING_PIN
         default y
-
     menuconfig BSP_USING_UART
         bool "Enable UART"
         default y
@@ -35,6 +40,11 @@ menu "On-chip Peripheral Drivers"
                 depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
                 default n
         endif
+    config BSP_USING_QSPI
+        bool "Enable QSPI BUS"
+        select RT_USING_QSPI
+        select RT_USING_SPI
+        default n
 
 endmenu
 

bsp/stm32/stm32f746-st-disco/board/SConscript

@@ -7,8 +7,11 @@ cwd = GetCurrentDir()
 src = Glob('board.c')
 src += Glob('CubeMX_Config/Src/stm32f7xx_hal_msp.c')
 
+if GetDepend(['BSP_USING_QSPI_FLASH']):
+    src += Glob('ports/drv_qspi_flash.c')
 path = [cwd]
 path += [cwd + '/CubeMX_Config/Inc']
+path += [cwd + '/ports']
 
 if rtconfig.CROSS_TOOL == 'gcc':
     src += [cwd + '/../../libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f746xx.s']

bsp/stm32/stm32f746-st-disco/board/ports/drv_qspi_flash.c

+/*
+ * Copyright (c) 2006-2018, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2019-01-26     jinsheng    first version
+ */
+ 
+#include <board.h>
+#include <drv_qspi.h>
+#include <rtdevice.h>
+#include <rthw.h>
+#include <finsh.h>
+
+#ifdef BSP_USING_QSPI_FLASH
+
+#include "spi_flash.h"
+#include "spi_flash_sfud.h"
+
+char n25qxx_read_status_register2(struct rt_qspi_device *device)
+{
+    /* 0x35 read status register2 */
+    char instruction = 0x35, status;
+
+    rt_qspi_send_then_recv(device, &instruction, 1, &status, 1);
+
+    return status;
+}
+
+void n25qxx_write_enable(struct rt_qspi_device *device)
+{
+    /* 0x06 write enable */
+    char instruction = 0x06;
+
+    rt_qspi_send(device, &instruction, 1);
+}
+
+void n25qxx_enter_qspi_mode(struct rt_qspi_device *device)
+{
+    char status = 0;
+    /* 0x38 enter qspi mode */
+    char instruction = 0x38;
+    char write_status2_buf[2] = {0};
+
+    /* 0x31 write status register2 */
+    write_status2_buf[0] = 0x31;
+
+    status = n25qxx_read_status_register2(device);
+    if (!(status & 0x02))
+    {
+        status |= 1 << 1;
+        n25qxx_write_enable(device);
+        write_status2_buf[1] = status;
+        rt_qspi_send(device, &write_status2_buf, 2);
+        rt_qspi_send(device, &instruction, 1);
+        rt_kprintf("flash already enter qspi mode\n");
+        rt_thread_mdelay(10);
+    }
+}
+
+static int rt_hw_qspi_flash_with_sfud_init(void)
+{
+    stm32_qspi_bus_attach_device("qspi1", "qspi10", RT_NULL, 4, n25qxx_enter_qspi_mode, RT_NULL);
+    
+    /* init n25q128 */
+    if (RT_NULL == rt_sfud_flash_probe("n25q128", "qspi10"))
+    {
+        return -RT_ERROR;
+    }
+
+    return RT_EOK;
+}
+INIT_COMPONENT_EXPORT(rt_hw_qspi_flash_with_sfud_init);
+
+#endif/* BSP_USING_QSPI_FLASH */

bsp/stm32/stm32f746-st-disco/project.ewp

@@ -346,6 +346,7 @@
           <state>$PROJ_DIR$\..\..\..\components\finsh</state>
           <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
           <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7</state>
+          <state>$PROJ_DIR$\board\ports</state>
           <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
           <state>$PROJ_DIR$\.</state>
           <state>$PROJ_DIR$\applications</state>
@@ -1375,6 +1376,7 @@
           <state>$PROJ_DIR$\..\..\..\components\finsh</state>
           <state>$PROJ_DIR$\..\..\..\libcpu\arm\common</state>
           <state>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7</state>
+          <state>$PROJ_DIR$\board\ports</state>
           <state>$PROJ_DIR$\..\..\..\components\drivers\include</state>
           <state>$PROJ_DIR$\.</state>
           <state>$PROJ_DIR$\applications</state>
@@ -2135,21 +2137,21 @@
     </file>
   </group>
   <group>
-    <name>CORTEX-M7</name>
+    <name>cpu</name>
     <file>
-      <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7\cpuport.c</name>
+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c</name>
     </file>
     <file>
-      <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7\context_iar.S</name>
+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c</name>
     </file>
     <file>
-      <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c</name>
+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c</name>
     </file>
     <file>
-      <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c</name>
+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7\cpuport.c</name>
     </file>
     <file>
-      <name>$PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c</name>
+      <name>$PROJ_DIR$\..\..\..\libcpu\arm\cortex-m7\context_iar.S</name>
     </file>
   </group>
   <group>

bsp/stm32/stm32f746-st-disco/rtconfig.h

@@ -125,9 +125,6 @@
 /* Wiced WiFi */
 
 
-/* IoT Cloud */
-
-
 /* security packages */
 
 
@@ -151,8 +148,6 @@
 
 /* sample package */
 
-/* samples: kernel and components samples */
-
 
 /* example package: hello */
 

bsp/stm32/stm32f746-st-disco/template.uvoptx

@@ -187,6 +187,11 @@
         <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
       </DebugOpt>
       <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ST-LINKIII-KEIL_SWO</Key>
+          <Name>-U0670FF505356867767062043 -O206 -S0 -C0 -A0 -N00("ARM CoreSight SW-DP") -D00(5BA02477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20010000 -FC1000 -FN1 -FF0STM32F7x_1024.FLM -FS08000000 -FL0100000 -FP0($$Device:STM32F746NGHx$CMSIS\Flash\STM32F7x_1024.FLM)</Name>
+        </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
           <Key>UL2CM3</Key>