Skip to content

R
rt-thread

Keyboard Man_俊 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 b21c35df 编写于 作者: A ArdaFu
浏览文件
操作

[bsp] Add IAR EWARM project template for SCONS project auto generation.

上级 d1a4f2e8
隐藏空白更改
内联 并排
Showing with 1917 addition and 10 deletion
bsp/tm4c129x/applications/board.c
浏览文件 @ b21c35df
......@@ -61,6 +61,7 @@ extern void HardFault_Handler(void);
*/
void rt_hw_board_init()
{
MAP_IntMasterDisable();
IntRegister(FAULT_HARD, HardFault_Handler);
IntRegister(FAULT_PENDSV, PendSV_Handler);
IntRegister(FAULT_SYSTICK, SysTick_Handler);
......@@ -87,7 +88,7 @@ void rt_hw_board_init()
MAP_SysTickEnable();
/* set pend exception priority */
IntPrioritySet(FAULT_PENDSV, (1 << 5) - 1);
//IntPrioritySet(FAULT_PENDSV, (1 << 5) - 1);
/*init uart device*/
rt_hw_uart_init();
......
bsp/tm4c129x/drivers/drv_uart.c
浏览文件 @ b21c35df
......@@ -36,7 +36,7 @@ typedef struct hw_uart_device
static rt_err_t hw_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
{
uint32_t config;
uint32_t config = 0;
hw_uart_t* uart;
RT_ASSERT(serial != RT_NULL);
uart = mUartGetHwPtr(serial);
......@@ -206,7 +206,7 @@ int rt_hw_uart_init(void)
MAP_SysCtlPeripheralEnable(SYSCTL_PERIPH_UART0);
/* preemption = 1, sub-priority = 1 */
IntPrioritySet(INT_UART0, ((0x01 << 5) | 0x01));
//IntPrioritySet(INT_UART0, ((0x01 << 5) | 0x01));
/* Enable Interrupt for UART channel */
UARTIntRegister(uart->hw_base, UART0_IRQHandler);
......
bsp/tm4c129x/libraries/startup/startup_ewarm.c
浏览文件 @ b21c35df
......@@ -50,7 +50,10 @@ static void IntDefaultHandler(void);
//
//*****************************************************************************
extern void __iar_program_start(void);
extern void PendSV_Handler(void);
extern void SysTick_Handler(void);
extern void UART0_IRQHandler(void);
extern void HardFault_Handler(void);
//*****************************************************************************
//
// Reserve space for the system stack.
......@@ -84,7 +87,7 @@ __root const uVectorEntry __vector_table[] @ ".intvec" =
// The initial stack pointer
ResetISR, // The reset handler
NmiSR, // The NMI handler
FaultISR, // The hard fault handler
HardFault_Handler, // The hard fault handler
IntDefaultHandler, // The MPU fault handler
IntDefaultHandler, // The bus fault handler
IntDefaultHandler, // The usage fault handler
......@@ -95,14 +98,14 @@ __root const uVectorEntry __vector_table[] @ ".intvec" =
IntDefaultHandler, // SVCall handler
IntDefaultHandler, // Debug monitor handler
0, // Reserved
IntDefaultHandler, // The PendSV handler
IntDefaultHandler, // The SysTick handler
PendSV_Handler, //IntDefaultHandler, // The PendSV handler
SysTick_Handler,//IntDefaultHandler, // The SysTick handler
IntDefaultHandler, // GPIO Port A
IntDefaultHandler, // GPIO Port B
IntDefaultHandler, // GPIO Port C
IntDefaultHandler, // GPIO Port D
IntDefaultHandler, // GPIO Port E
IntDefaultHandler, // UART0 Rx and Tx
UART0_IRQHandler, //IntDefaultHandler, // UART0 Rx and Tx
IntDefaultHandler, // UART1 Rx and Tx
IntDefaultHandler, // SSI0 Rx and Tx
IntDefaultHandler, // I2C0 Master and Slave
......
bsp/tm4c129x/libraries/startup/startup_gcc.c
浏览文件 @ b21c35df
......@@ -45,6 +45,8 @@ extern int main(void);
extern void SysTick_Handler(void);
extern void PendSV_Handler(void);
extern void UART0_IRQHandler(void);
extern void HardFault_Handler(void);
//*****************************************************************************
//
// Reserve space for the system stack.
......@@ -65,7 +67,7 @@ void (* const g_pfnVectors[])(void) =
// The initial stack pointer
ResetISR, // The reset handler
NmiSR, // The NMI handler
FaultISR, // The hard fault handler
HardFault_Handler, // The hard fault handler
IntDefaultHandler, // The MPU fault handler
IntDefaultHandler, // The bus fault handler
IntDefaultHandler, // The usage fault handler
......@@ -83,7 +85,7 @@ void (* const g_pfnVectors[])(void) =
IntDefaultHandler, // GPIO Port C
IntDefaultHandler, // GPIO Port D
IntDefaultHandler, // GPIO Port E
IntDefaultHandler, // UART0 Rx and Tx
UART0_IRQHandler, // UART0 Rx and Tx
IntDefaultHandler, // UART1 Rx and Tx
IntDefaultHandler, // SSI0 Rx and Tx
IntDefaultHandler, // I2C0 Master and Slave
......
bsp/tm4c129x/template.ewp 0 → 100644
浏览文件 @ b21c35df
<?xml version="1.0" encoding="iso-8859-1"?>
<project>
<fileVersion>2</fileVersion>
<configuration>
<name>Debug</name>
<toolchain>
<name>ARM</name>
</toolchain>
<debug>1</debug>
<settings>
<name>General</name>
<archiveVersion>3</archiveVersion>
<data>
<version>22</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>ExePath</name>
<state>build\Exe</state>
</option>
<option>
<name>ObjPath</name>
<state>build\Obj</state>
</option>
<option>
<name>ListPath</name>
<state>build\List</state>
</option>
<option>
<name>Variant</name>
<version>20</version>
<state>40</state>
</option>
<option>
<name>GEndianMode</name>
<state>0</state>
</option>
<option>
<name>Input variant</name>
<version>3</version>
<state>0</state>
</option>
<option>
<name>Input description</name>
<state>Automatic choice of formatter.</state>
</option>
<option>
<name>Output variant</name>
<version>2</version>
<state>0</state>
</option>
<option>
<name>Output description</name>
<state>Automatic choice of formatter.</state>
</option>
<option>
<name>GOutputBinary</name>
<state>0</state>
</option>
<option>
<name>FPU</name>
<version>2</version>
<state>5</state>
</option>
<option>
<name>OGCoreOrChip</name>
<state>1</state>
</option>
<option>
<name>GRuntimeLibSelect</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>GRuntimeLibSelectSlave</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>RTDescription</name>
<state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
</option>
<option>
<name>OGProductVersion</name>
<state>7.20.1.7306</state>
</option>
<option>
<name>OGLastSavedByProductVersion</name>
<state>7.20.1.7306</state>
</option>
<option>
<name>GeneralEnableMisra</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraVerbose</name>
<state>0</state>
</option>
<option>
<name>OGChipSelectEditMenu</name>
<state>TM4C1294NCPDT TexasInstruments TM4C1294NCPDT</state>
</option>
<option>
<name>GenLowLevelInterface</name>
<state>1</state>
</option>
<option>
<name>GEndianModeBE</name>
<state>1</state>
</option>
<option>
<name>OGBufferedTerminalOutput</name>
<state>0</state>
</option>
<option>
<name>GenStdoutInterface</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>GeneralMisraVer</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>RTConfigPath2</name>
<state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
</option>
<option>
<name>GFPUCoreSlave</name>
<version>20</version>
<state>40</state>
</option>
<option>
<name>GBECoreSlave</name>
<version>20</version>
<state>40</state>
</option>
<option>
<name>OGUseCmsis</name>
<state>0</state>
</option>
<option>
<name>OGUseCmsisDspLib</name>
<state>0</state>
</option>
<option>
<name>GRuntimeLibThreads</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>ICCARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>31</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>CCDefines</name>
<state>ewarm</state>
</option>
<option>
<name>CCPreprocFile</name>
<state>0</state>
</option>
<option>
<name>CCPreprocComments</name>
<state>0</state>
</option>
<option>
<name>CCPreprocLine</name>
<state>0</state>
</option>
<option>
<name>CCListCFile</name>
<state>0</state>
</option>
<option>
<name>CCListCMnemonics</name>
<state>0</state>
</option>
<option>
<name>CCListCMessages</name>
<state>0</state>
</option>
<option>
<name>CCListAssFile</name>
<state>0</state>
</option>
<option>
<name>CCListAssSource</name>
<state>0</state>
</option>
<option>
<name>CCEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>CCDiagSuppress</name>
<state>Pa050</state>
</option>
<option>
<name>CCDiagRemark</name>
<state></state>
</option>
<option>
<name>CCDiagWarning</name>
<state></state>
</option>
<option>
<name>CCDiagError</name>
<state></state>
</option>
<option>
<name>CCObjPrefix</name>
<state>1</state>
</option>
<option>
<name>CCAllowList</name>
<version>1</version>
<state>00000000</state>
</option>
<option>
<name>CCDebugInfo</name>
<state>1</state>
</option>
<option>
<name>IEndianMode</name>
<state>1</state>
</option>
<option>
<name>IProcessor</name>
<state>1</state>
</option>
<option>
<name>IExtraOptionsCheck</name>
<state>0</state>
</option>
<option>
<name>IExtraOptions</name>
<state></state>
</option>
<option>
<name>CCLangConformance</name>
<state>0</state>
</option>
<option>
<name>CCSignedPlainChar</name>
<state>1</state>
</option>
<option>
<name>CCRequirePrototypes</name>
<state>0</state>
</option>
<option>
<name>CCMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>CCDiagWarnAreErr</name>
<state>0</state>
</option>
<option>
<name>CCCompilerRuntimeInfo</name>
<state>0</state>
</option>
<option>
<name>IFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>OutputFile</name>
<state>$FILE_BNAME$.o</state>
</option>
<option>
<name>CCLibConfigHeader</name>
<state>1</state>
</option>
<option>
<name>PreInclude</name>
<state></state>
</option>
<option>
<name>CompilerMisraOverride</name>
<state>0</state>
</option>
<option>
<name>CCIncludePath2</name>
<state></state>
</option>
<option>
<name>CCStdIncCheck</name>
<state>0</state>
</option>
<option>
<name>CCCodeSection</name>
<state>.text</state>
</option>
<option>
<name>IInterwork2</name>
<state>0</state>
</option>
<option>
<name>IProcessorMode2</name>
<state>1</state>
</option>
<option>
<name>CCOptLevel</name>
<state>1</state>
</option>
<option>
<name>CCOptStrategy</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCOptLevelSlave</name>
<state>1</state>
</option>
<option>
<name>CompilerMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>CompilerMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>CCPosIndRopi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndRwpi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndNoDynInit</name>
<state>0</state>
</option>
<option>
<name>IccLang</name>
<state>0</state>
</option>
<option>
<name>IccCDialect</name>
<state>1</state>
</option>
<option>
<name>IccAllowVLA</name>
<state>0</state>
</option>
<option>
<name>IccCppDialect</name>
<state>1</state>
</option>
<option>
<name>IccExceptions</name>
<state>1</state>
</option>
<option>
<name>IccRTTI</name>
<state>1</state>
</option>
<option>
<name>IccStaticDestr</name>
<state>1</state>
</option>
<option>
<name>IccCppInlineSemantics</name>
<state>0</state>
</option>
<option>
<name>IccCmsis</name>
<state>1</state>
</option>
<option>
<name>IccFloatSemantics</name>
<state>0</state>
</option>
<option>
<name>CCOptimizationNoSizeConstraints</name>
<state>0</state>
</option>
<option>
<name>CCNoLiteralPool</name>
<state>0</state>
</option>
<option>
<name>CCOptStrategySlave</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCGuardCalls</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>AARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>9</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>AObjPrefix</name>
<state>1</state>
</option>
<option>
<name>AEndian</name>
<state>1</state>
</option>
<option>
<name>ACaseSensitivity</name>
<state>1</state>
</option>
<option>
<name>MacroChars</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>AWarnEnable</name>
<state>0</state>
</option>
<option>
<name>AWarnWhat</name>
<state>0</state>
</option>
<option>
<name>AWarnOne</name>
<state></state>
</option>
<option>
<name>AWarnRange1</name>
<state></state>
</option>
<option>
<name>AWarnRange2</name>
<state></state>
</option>
<option>
<name>ADebug</name>
<state>1</state>
</option>
<option>
<name>AltRegisterNames</name>
<state>0</state>
</option>
<option>
<name>ADefines</name>
<state></state>
</option>
<option>
<name>AList</name>
<state>0</state>
</option>
<option>
<name>AListHeader</name>
<state>1</state>
</option>
<option>
<name>AListing</name>
<state>1</state>
</option>
<option>
<name>Includes</name>
<state>0</state>
</option>
<option>
<name>MacDefs</name>
<state>0</state>
</option>
<option>
<name>MacExps</name>
<state>1</state>
</option>
<option>
<name>MacExec</name>
<state>0</state>
</option>
<option>
<name>OnlyAssed</name>
<state>0</state>
</option>
<option>
<name>MultiLine</name>
<state>0</state>
</option>
<option>
<name>PageLengthCheck</name>
<state>0</state>
</option>
<option>
<name>PageLength</name>
<state>80</state>
</option>
<option>
<name>TabSpacing</name>
<state>8</state>
</option>
<option>
<name>AXRef</name>
<state>0</state>
</option>
<option>
<name>AXRefDefines</name>
<state>0</state>
</option>
<option>
<name>AXRefInternal</name>
<state>0</state>
</option>
<option>
<name>AXRefDual</name>
<state>0</state>
</option>
<option>
<name>AProcessor</name>
<state>1</state>
</option>
<option>
<name>AFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>AOutputFile</name>
<state>$FILE_BNAME$.o</state>
</option>
<option>
<name>AMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsCheck</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsEdit</name>
<state>100</state>
</option>
<option>
<name>AIgnoreStdInclude</name>
<state>0</state>
</option>
<option>
<name>AUserIncludes</name>
<state></state>
</option>
<option>
<name>AExtraOptionsCheckV2</name>
<state>0</state>
</option>
<option>
<name>AExtraOptionsV2</name>
<state></state>
</option>
<option>
<name>AsmNoLiteralPool</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>OBJCOPY</name>
<archiveVersion>0</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>OOCOutputFormat</name>
<version>2</version>
<state>2</state>
</option>
<option>
<name>OCOutputOverride</name>
<state>1</state>
</option>
<option>
<name>OOCOutputFile</name>
<state>rtthread.bin</state>
</option>
<option>
<name>OOCCommandLineProducer</name>
<state>1</state>
</option>
<option>
<name>OOCObjCopyEnable</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>CUSTOM</name>
<archiveVersion>3</archiveVersion>
<data>
<extensions></extensions>
<cmdline></cmdline>
</data>
</settings>
<settings>
<name>BICOMP</name>
<archiveVersion>0</archiveVersion>
<data/>
</settings>
<settings>
<name>BUILDACTION</name>
<archiveVersion>1</archiveVersion>
<data>
<prebuild></prebuild>
<postbuild></postbuild>
</data>
</settings>
<settings>
<name>ILINK</name>
<archiveVersion>0</archiveVersion>
<data>
<version>16</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>IlinkLibIOConfig</name>
<state>1</state>
</option>
<option>
<name>XLinkMisraHandler</name>
<state>0</state>
</option>
<option>
<name>IlinkInputFileSlave</name>
<state>0</state>
</option>
<option>
<name>IlinkOutputFile</name>
<state>rtthread.out</state>
</option>
<option>
<name>IlinkDebugInfoEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkKeepSymbols</name>
<state></state>
</option>
<option>
<name>IlinkRawBinaryFile</name>
<state></state>
</option>
<option>
<name>IlinkRawBinarySymbol</name>
<state></state>
</option>
<option>
<name>IlinkRawBinarySegment</name>
<state></state>
</option>
<option>
<name>IlinkRawBinaryAlign</name>
<state></state>
</option>
<option>
<name>IlinkDefines</name>
<state></state>
</option>
<option>
<name>IlinkConfigDefines</name>
<state></state>
</option>
<option>
<name>IlinkMapFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogInitialization</name>
<state>0</state>
</option>
<option>
<name>IlinkLogModule</name>
<state>0</state>
</option>
<option>
<name>IlinkLogSection</name>
<state>0</state>
</option>
<option>
<name>IlinkLogVeneer</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfOverride</name>
<state>1</state>
</option>
<option>
<name>IlinkIcfFile</name>
<state>tm4c_rom.icf</state>
</option>
<option>
<name>IlinkIcfFileSlave</name>
<state></state>
</option>
<option>
<name>IlinkEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>IlinkSuppressDiags</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsRem</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsWarn</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsErr</name>
<state></state>
</option>
<option>
<name>IlinkWarningsAreErrors</name>
<state>0</state>
</option>
<option>
<name>IlinkUseExtraOptions</name>
<state>0</state>
</option>
<option>
<name>IlinkExtraOptions</name>
<state></state>
</option>
<option>
<name>IlinkLowLevelInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkAutoLibEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkAdditionalLibs</name>
<state></state>
</option>
<option>
<name>IlinkOverrideProgramEntryLabel</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabelSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabel</name>
<state>__iar_program_start</state>
</option>
<option>
<name>DoFill</name>
<state>0</state>
</option>
<option>
<name>FillerByte</name>
<state>0xFF</state>
</option>
<option>
<name>FillerStart</name>
<state>0x0</state>
</option>
<option>
<name>FillerEnd</name>
<state>0x0</state>
</option>
<option>
<name>CrcSize</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcAlign</name>
<state>1</state>
</option>
<option>
<name>CrcPoly</name>
<state>0x11021</state>
</option>
<option>
<name>CrcCompl</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcBitOrder</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcInitialValue</name>
<state>0x0</state>
</option>
<option>
<name>DoCrc</name>
<state>0</state>
</option>
<option>
<name>IlinkBE8Slave</name>
<state>1</state>
</option>
<option>
<name>IlinkBufferedTerminalOutput</name>
<state>1</state>
</option>
<option>
<name>IlinkStdoutInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>CrcFullSize</name>
<state>0</state>
</option>
<option>
<name>IlinkIElfToolPostProcess</name>
<state>0</state>
</option>
<option>
<name>IlinkLogAutoLibSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkLogRedirSymbols</name>
<state>0</state>
</option>
<option>
<name>IlinkLogUnusedFragments</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcReverseByteOrder</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcUseAsInput</name>
<state>1</state>
</option>
<option>
<name>IlinkOptInline</name>
<state>0</state>
</option>
<option>
<name>IlinkOptExceptionsAllow</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsForce</name>
<state>0</state>
</option>
<option>
<name>IlinkCmsis</name>
<state>1</state>
</option>
<option>
<name>IlinkOptMergeDuplSections</name>
<state>0</state>
</option>
<option>
<name>IlinkOptUseVfe</name>
<state>1</state>
</option>
<option>
<name>IlinkOptForceVfe</name>
<state>0</state>
</option>
<option>
<name>IlinkStackAnalysisEnable</name>
<state>0</state>
</option>
<option>
<name>IlinkStackControlFile</name>
<state></state>
</option>
<option>
<name>IlinkStackCallGraphFile</name>
<state></state>
</option>
<option>
<name>CrcAlgorithm</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcUnitSize</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>IlinkThreadsSlave</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>IARCHIVE</name>
<archiveVersion>0</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>1</debug>
<option>
<name>IarchiveInputs</name>
<state></state>
</option>
<option>
<name>IarchiveOverride</name>
<state>0</state>
</option>
<option>
<name>IarchiveOutput</name>
<state>###Unitialized###</state>
</option>
</data>
</settings>
<settings>
<name>BILINK</name>
<archiveVersion>0</archiveVersion>
<data/>
</settings>
</configuration>
<configuration>
<name>Release</name>
<toolchain>
<name>ARM</name>
</toolchain>
<debug>0</debug>
<settings>
<name>General</name>
<archiveVersion>3</archiveVersion>
<data>
<version>22</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>ExePath</name>
<state>Release\Exe</state>
</option>
<option>
<name>ObjPath</name>
<state>Release\Obj</state>
</option>
<option>
<name>ListPath</name>
<state>Release\List</state>
</option>
<option>
<name>Variant</name>
<version>20</version>
<state>0</state>
</option>
<option>
<name>GEndianMode</name>
<state>0</state>
</option>
<option>
<name>Input variant</name>
<version>3</version>
<state>0</state>
</option>
<option>
<name>Input description</name>
<state></state>
</option>
<option>
<name>Output variant</name>
<version>2</version>
<state>0</state>
</option>
<option>
<name>Output description</name>
<state></state>
</option>
<option>
<name>GOutputBinary</name>
<state>0</state>
</option>
<option>
<name>FPU</name>
<version>2</version>
<state>0</state>
</option>
<option>
<name>OGCoreOrChip</name>
<state>0</state>
</option>
<option>
<name>GRuntimeLibSelect</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>GRuntimeLibSelectSlave</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>RTDescription</name>
<state></state>
</option>
<option>
<name>OGProductVersion</name>
<state>7.20.1.7306</state>
</option>
<option>
<name>OGLastSavedByProductVersion</name>
<state></state>
</option>
<option>
<name>GeneralEnableMisra</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraVerbose</name>
<state>0</state>
</option>
<option>
<name>OGChipSelectEditMenu</name>
<state></state>
</option>
<option>
<name>GenLowLevelInterface</name>
<state>0</state>
</option>
<option>
<name>GEndianModeBE</name>
<state>0</state>
</option>
<option>
<name>OGBufferedTerminalOutput</name>
<state>0</state>
</option>
<option>
<name>GenStdoutInterface</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>GeneralMisraVer</name>
<state>0</state>
</option>
<option>
<name>GeneralMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>RTConfigPath2</name>
<state></state>
</option>
<option>
<name>GFPUCoreSlave</name>
<version>20</version>
<state>1</state>
</option>
<option>
<name>GBECoreSlave</name>
<version>20</version>
<state>1</state>
</option>
<option>
<name>OGUseCmsis</name>
<state>0</state>
</option>
<option>
<name>OGUseCmsisDspLib</name>
<state>0</state>
</option>
<option>
<name>GRuntimeLibThreads</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>ICCARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>31</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>CCDefines</name>
<state>NDEBUG</state>
</option>
<option>
<name>CCPreprocFile</name>
<state>0</state>
</option>
<option>
<name>CCPreprocComments</name>
<state>0</state>
</option>
<option>
<name>CCPreprocLine</name>
<state>0</state>
</option>
<option>
<name>CCListCFile</name>
<state>0</state>
</option>
<option>
<name>CCListCMnemonics</name>
<state>0</state>
</option>
<option>
<name>CCListCMessages</name>
<state>0</state>
</option>
<option>
<name>CCListAssFile</name>
<state>0</state>
</option>
<option>
<name>CCListAssSource</name>
<state>0</state>
</option>
<option>
<name>CCEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>CCDiagSuppress</name>
<state></state>
</option>
<option>
<name>CCDiagRemark</name>
<state></state>
</option>
<option>
<name>CCDiagWarning</name>
<state></state>
</option>
<option>
<name>CCDiagError</name>
<state></state>
</option>
<option>
<name>CCObjPrefix</name>
<state>1</state>
</option>
<option>
<name>CCAllowList</name>
<version>1</version>
<state>11111110</state>
</option>
<option>
<name>CCDebugInfo</name>
<state>0</state>
</option>
<option>
<name>IEndianMode</name>
<state>1</state>
</option>
<option>
<name>IProcessor</name>
<state>1</state>
</option>
<option>
<name>IExtraOptionsCheck</name>
<state>0</state>
</option>
<option>
<name>IExtraOptions</name>
<state></state>
</option>
<option>
<name>CCLangConformance</name>
<state>0</state>
</option>
<option>
<name>CCSignedPlainChar</name>
<state>1</state>
</option>
<option>
<name>CCRequirePrototypes</name>
<state>0</state>
</option>
<option>
<name>CCMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>CCDiagWarnAreErr</name>
<state>0</state>
</option>
<option>
<name>CCCompilerRuntimeInfo</name>
<state>0</state>
</option>
<option>
<name>IFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>OutputFile</name>
<state></state>
</option>
<option>
<name>CCLibConfigHeader</name>
<state>1</state>
</option>
<option>
<name>PreInclude</name>
<state></state>
</option>
<option>
<name>CompilerMisraOverride</name>
<state>0</state>
</option>
<option>
<name>CCIncludePath2</name>
<state></state>
</option>
<option>
<name>CCStdIncCheck</name>
<state>0</state>
</option>
<option>
<name>CCCodeSection</name>
<state>.text</state>
</option>
<option>
<name>IInterwork2</name>
<state>0</state>
</option>
<option>
<name>IProcessorMode2</name>
<state>1</state>
</option>
<option>
<name>CCOptLevel</name>
<state>3</state>
</option>
<option>
<name>CCOptStrategy</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCOptLevelSlave</name>
<state>1</state>
</option>
<option>
<name>CompilerMisraRules98</name>
<version>0</version>
<state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
</option>
<option>
<name>CompilerMisraRules04</name>
<version>0</version>
<state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
</option>
<option>
<name>CCPosIndRopi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndRwpi</name>
<state>0</state>
</option>
<option>
<name>CCPosIndNoDynInit</name>
<state>0</state>
</option>
<option>
<name>IccLang</name>
<state>0</state>
</option>
<option>
<name>IccCDialect</name>
<state>1</state>
</option>
<option>
<name>IccAllowVLA</name>
<state>0</state>
</option>
<option>
<name>IccCppDialect</name>
<state>1</state>
</option>
<option>
<name>IccExceptions</name>
<state>1</state>
</option>
<option>
<name>IccRTTI</name>
<state>1</state>
</option>
<option>
<name>IccStaticDestr</name>
<state>1</state>
</option>
<option>
<name>IccCppInlineSemantics</name>
<state>0</state>
</option>
<option>
<name>IccCmsis</name>
<state>1</state>
</option>
<option>
<name>IccFloatSemantics</name>
<state>0</state>
</option>
<option>
<name>CCOptimizationNoSizeConstraints</name>
<state>0</state>
</option>
<option>
<name>CCNoLiteralPool</name>
<state>0</state>
</option>
<option>
<name>CCOptStrategySlave</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CCGuardCalls</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>AARM</name>
<archiveVersion>2</archiveVersion>
<data>
<version>9</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>AObjPrefix</name>
<state>1</state>
</option>
<option>
<name>AEndian</name>
<state>1</state>
</option>
<option>
<name>ACaseSensitivity</name>
<state>1</state>
</option>
<option>
<name>MacroChars</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>AWarnEnable</name>
<state>0</state>
</option>
<option>
<name>AWarnWhat</name>
<state>0</state>
</option>
<option>
<name>AWarnOne</name>
<state></state>
</option>
<option>
<name>AWarnRange1</name>
<state></state>
</option>
<option>
<name>AWarnRange2</name>
<state></state>
</option>
<option>
<name>ADebug</name>
<state>0</state>
</option>
<option>
<name>AltRegisterNames</name>
<state>0</state>
</option>
<option>
<name>ADefines</name>
<state></state>
</option>
<option>
<name>AList</name>
<state>0</state>
</option>
<option>
<name>AListHeader</name>
<state>1</state>
</option>
<option>
<name>AListing</name>
<state>1</state>
</option>
<option>
<name>Includes</name>
<state>0</state>
</option>
<option>
<name>MacDefs</name>
<state>0</state>
</option>
<option>
<name>MacExps</name>
<state>1</state>
</option>
<option>
<name>MacExec</name>
<state>0</state>
</option>
<option>
<name>OnlyAssed</name>
<state>0</state>
</option>
<option>
<name>MultiLine</name>
<state>0</state>
</option>
<option>
<name>PageLengthCheck</name>
<state>0</state>
</option>
<option>
<name>PageLength</name>
<state>80</state>
</option>
<option>
<name>TabSpacing</name>
<state>8</state>
</option>
<option>
<name>AXRef</name>
<state>0</state>
</option>
<option>
<name>AXRefDefines</name>
<state>0</state>
</option>
<option>
<name>AXRefInternal</name>
<state>0</state>
</option>
<option>
<name>AXRefDual</name>
<state>0</state>
</option>
<option>
<name>AProcessor</name>
<state>1</state>
</option>
<option>
<name>AFpuProcessor</name>
<state>1</state>
</option>
<option>
<name>AOutputFile</name>
<state></state>
</option>
<option>
<name>AMultibyteSupport</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsCheck</name>
<state>0</state>
</option>
<option>
<name>ALimitErrorsEdit</name>
<state>100</state>
</option>
<option>
<name>AIgnoreStdInclude</name>
<state>0</state>
</option>
<option>
<name>AUserIncludes</name>
<state></state>
</option>
<option>
<name>AExtraOptionsCheckV2</name>
<state>0</state>
</option>
<option>
<name>AExtraOptionsV2</name>
<state></state>
</option>
<option>
<name>AsmNoLiteralPool</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>OBJCOPY</name>
<archiveVersion>0</archiveVersion>
<data>
<version>1</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>OOCOutputFormat</name>
<version>2</version>
<state>0</state>
</option>
<option>
<name>OCOutputOverride</name>
<state>0</state>
</option>
<option>
<name>OOCOutputFile</name>
<state></state>
</option>
<option>
<name>OOCCommandLineProducer</name>
<state>1</state>
</option>
<option>
<name>OOCObjCopyEnable</name>
<state>0</state>
</option>
</data>
</settings>
<settings>
<name>CUSTOM</name>
<archiveVersion>3</archiveVersion>
<data>
<extensions></extensions>
<cmdline></cmdline>
</data>
</settings>
<settings>
<name>BICOMP</name>
<archiveVersion>0</archiveVersion>
<data/>
</settings>
<settings>
<name>BUILDACTION</name>
<archiveVersion>1</archiveVersion>
<data>
<prebuild></prebuild>
<postbuild></postbuild>
</data>
</settings>
<settings>
<name>ILINK</name>
<archiveVersion>0</archiveVersion>
<data>
<version>16</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>IlinkLibIOConfig</name>
<state>1</state>
</option>
<option>
<name>XLinkMisraHandler</name>
<state>0</state>
</option>
<option>
<name>IlinkInputFileSlave</name>
<state>0</state>
</option>
<option>
<name>IlinkOutputFile</name>
<state>###Unitialized###</state>
</option>
<option>
<name>IlinkDebugInfoEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkKeepSymbols</name>
<state></state>
</option>
<option>
<name>IlinkRawBinaryFile</name>
<state></state>
</option>
<option>
<name>IlinkRawBinarySymbol</name>
<state></state>
</option>
<option>
<name>IlinkRawBinarySegment</name>
<state></state>
</option>
<option>
<name>IlinkRawBinaryAlign</name>
<state></state>
</option>
<option>
<name>IlinkDefines</name>
<state></state>
</option>
<option>
<name>IlinkConfigDefines</name>
<state></state>
</option>
<option>
<name>IlinkMapFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogFile</name>
<state>0</state>
</option>
<option>
<name>IlinkLogInitialization</name>
<state>0</state>
</option>
<option>
<name>IlinkLogModule</name>
<state>0</state>
</option>
<option>
<name>IlinkLogSection</name>
<state>0</state>
</option>
<option>
<name>IlinkLogVeneer</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfOverride</name>
<state>0</state>
</option>
<option>
<name>IlinkIcfFile</name>
<state>lnk0t.icf</state>
</option>
<option>
<name>IlinkIcfFileSlave</name>
<state></state>
</option>
<option>
<name>IlinkEnableRemarks</name>
<state>0</state>
</option>
<option>
<name>IlinkSuppressDiags</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsRem</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsWarn</name>
<state></state>
</option>
<option>
<name>IlinkTreatAsErr</name>
<state></state>
</option>
<option>
<name>IlinkWarningsAreErrors</name>
<state>0</state>
</option>
<option>
<name>IlinkUseExtraOptions</name>
<state>0</state>
</option>
<option>
<name>IlinkExtraOptions</name>
<state></state>
</option>
<option>
<name>IlinkLowLevelInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>IlinkAutoLibEnable</name>
<state>1</state>
</option>
<option>
<name>IlinkAdditionalLibs</name>
<state></state>
</option>
<option>
<name>IlinkOverrideProgramEntryLabel</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabelSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkProgramEntryLabel</name>
<state></state>
</option>
<option>
<name>DoFill</name>
<state>0</state>
</option>
<option>
<name>FillerByte</name>
<state>0xFF</state>
</option>
<option>
<name>FillerStart</name>
<state>0x0</state>
</option>
<option>
<name>FillerEnd</name>
<state>0x0</state>
</option>
<option>
<name>CrcSize</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcAlign</name>
<state>1</state>
</option>
<option>
<name>CrcPoly</name>
<state>0x11021</state>
</option>
<option>
<name>CrcCompl</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcBitOrder</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>CrcInitialValue</name>
<state>0x0</state>
</option>
<option>
<name>DoCrc</name>
<state>0</state>
</option>
<option>
<name>IlinkBE8Slave</name>
<state>1</state>
</option>
<option>
<name>IlinkBufferedTerminalOutput</name>
<state>1</state>
</option>
<option>
<name>IlinkStdoutInterfaceSlave</name>
<state>1</state>
</option>
<option>
<name>CrcFullSize</name>
<state>0</state>
</option>
<option>
<name>IlinkIElfToolPostProcess</name>
<state>0</state>
</option>
<option>
<name>IlinkLogAutoLibSelect</name>
<state>0</state>
</option>
<option>
<name>IlinkLogRedirSymbols</name>
<state>0</state>
</option>
<option>
<name>IlinkLogUnusedFragments</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcReverseByteOrder</name>
<state>0</state>
</option>
<option>
<name>IlinkCrcUseAsInput</name>
<state>1</state>
</option>
<option>
<name>IlinkOptInline</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsAllow</name>
<state>1</state>
</option>
<option>
<name>IlinkOptExceptionsForce</name>
<state>0</state>
</option>
<option>
<name>IlinkCmsis</name>
<state>1</state>
</option>
<option>
<name>IlinkOptMergeDuplSections</name>
<state>0</state>
</option>
<option>
<name>IlinkOptUseVfe</name>
<state>1</state>
</option>
<option>
<name>IlinkOptForceVfe</name>
<state>0</state>
</option>
<option>
<name>IlinkStackAnalysisEnable</name>
<state>0</state>
</option>
<option>
<name>IlinkStackControlFile</name>
<state></state>
</option>
<option>
<name>IlinkStackCallGraphFile</name>
<state></state>
</option>
<option>
<name>CrcAlgorithm</name>
<version>0</version>
<state>1</state>
</option>
<option>
<name>CrcUnitSize</name>
<version>0</version>
<state>0</state>
</option>
<option>
<name>IlinkThreadsSlave</name>
<state>1</state>
</option>
</data>
</settings>
<settings>
<name>IARCHIVE</name>
<archiveVersion>0</archiveVersion>
<data>
<version>0</version>
<wantNonLocal>1</wantNonLocal>
<debug>0</debug>
<option>
<name>IarchiveInputs</name>
<state></state>
</option>
<option>
<name>IarchiveOverride</name>
<state>0</state>
</option>
<option>
<name>IarchiveOutput</name>
<state>###Unitialized###</state>
</option>
</data>
</settings>
<settings>
<name>BILINK</name>
<archiveVersion>0</archiveVersion>
<data/>
</settings>
</configuration>
</project>
bsp/tm4c129x/template.eww 0 → 100644
浏览文件 @ b21c35df
<?xml version="1.0" encoding="iso-8859-1"?>
<workspace>
<project>
<path>$WS_DIR$\template.ewp</path>
</project>
<batchBuild/>
</workspace>
bsp/tm4c129x/tm4c_rom.icf
浏览文件 @ b21c35df
......@@ -76,3 +76,5 @@ place at start of SRAM { section VTABLE };
// Place all read/write items into SRAM.
//
place in SRAM { readwrite, block HEAP };
keep { section FSymTab };
keep { section VSymTab };
\ No newline at end of file
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或