package storage

// Copyright (c) Microsoft and contributors.  All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
//
// See the License for the specific language governing permissions and
// limitations under the License.
//
// Code generated by Microsoft (R) AutoRest Code Generator.
// Changes may cause incorrect behavior and will be lost if the code is regenerated.

import (
	"github.com/Azure/go-autorest/autorest"
	"github.com/Azure/go-autorest/autorest/azure"
	"github.com/Azure/go-autorest/autorest/validation"
	"net/http"
)

// AccountsClient is the the Azure Storage Management API.
type AccountsClient struct {
	ManagementClient
}

// NewAccountsClient creates an instance of the AccountsClient client.
func NewAccountsClient(subscriptionID string) AccountsClient {
	return NewAccountsClientWithBaseURI(DefaultBaseURI, subscriptionID)
}

// NewAccountsClientWithBaseURI creates an instance of the AccountsClient client.
func NewAccountsClientWithBaseURI(baseURI string, subscriptionID string) AccountsClient {
	return AccountsClient{NewWithBaseURI(baseURI, subscriptionID)}
}

// CheckNameAvailability checks that the storage account name is valid and is not already in use.
//
// accountName is the name of the storage account within the specified resource group. Storage account names must be
// between 3 and 24 characters in length and use numbers and lower-case letters only.
func (client AccountsClient) CheckNameAvailability(accountName AccountCheckNameAvailabilityParameters) (result CheckNameAvailabilityResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: accountName,
			Constraints: []validation.Constraint{{Target: "accountName.Name", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "accountName.Type", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewErrorWithValidationError(err, "storage.AccountsClient", "CheckNameAvailability")
	}

	req, err := client.CheckNameAvailabilityPreparer(accountName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "CheckNameAvailability", nil, "Failure preparing request")
		return
	}

	resp, err := client.CheckNameAvailabilitySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "CheckNameAvailability", resp, "Failure sending request")
		return
	}

	result, err = client.CheckNameAvailabilityResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "CheckNameAvailability", resp, "Failure responding to request")
	}

	return
}

// CheckNameAvailabilityPreparer prepares the CheckNameAvailability request.
func (client AccountsClient) CheckNameAvailabilityPreparer(accountName AccountCheckNameAvailabilityParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-06-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Storage/checkNameAvailability", pathParameters),
		autorest.WithJSON(accountName),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{})
}

// CheckNameAvailabilitySender sends the CheckNameAvailability request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) CheckNameAvailabilitySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// CheckNameAvailabilityResponder handles the response to the CheckNameAvailability request. The method always
// closes the http.Response Body.
func (client AccountsClient) CheckNameAvailabilityResponder(resp *http.Response) (result CheckNameAvailabilityResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Create asynchronously creates a new storage account with the specified parameters. If an account is already created
// and a subsequent create request is issued with different properties, the account properties will be updated. If an
// account is already created and a subsequent create or update request is issued with the exact same set of
// properties, the request will succeed. This method may poll for completion. Polling can be canceled by passing the
// cancel channel argument. The channel will be used to cancel polling and any outstanding HTTP requests.
//
// resourceGroupName is the name of the resource group within the user's subscription. The name is case insensitive.
// accountName is the name of the storage account within the specified resource group. Storage account names must be
// between 3 and 24 characters in length and use numbers and lower-case letters only. parameters is the parameters to
// provide for the created account.
func (client AccountsClient) Create(resourceGroupName string, accountName string, parameters AccountCreateParameters, cancel <-chan struct{}) (<-chan Account, <-chan error) {
	resultChan := make(chan Account, 1)
	errChan := make(chan error, 1)
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: accountName,
			Constraints: []validation.Constraint{{Target: "accountName", Name: validation.MaxLength, Rule: 24, Chain: nil},
				{Target: "accountName", Name: validation.MinLength, Rule: 3, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.Sku", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "parameters.Location", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "parameters.Identity", Name: validation.Null, Rule: false,
					Chain: []validation.Constraint{{Target: "parameters.Identity.Type", Name: validation.Null, Rule: true, Chain: nil}}},
				{Target: "parameters.AccountPropertiesCreateParameters", Name: validation.Null, Rule: false,
					Chain: []validation.Constraint{{Target: "parameters.AccountPropertiesCreateParameters.CustomDomain", Name: validation.Null, Rule: false,
						Chain: []validation.Constraint{{Target: "parameters.AccountPropertiesCreateParameters.CustomDomain.Name", Name: validation.Null, Rule: true, Chain: nil}}},
					}}}}}); err != nil {
		errChan <- validation.NewErrorWithValidationError(err, "storage.AccountsClient", "Create")
		close(errChan)
		close(resultChan)
		return resultChan, errChan
	}

	go func() {
		var err error
		var result Account
		defer func() {
			if err != nil {
				errChan <- err
			}
			resultChan <- result
			close(resultChan)
			close(errChan)
		}()
		req, err := client.CreatePreparer(resourceGroupName, accountName, parameters, cancel)
		if err != nil {
			err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Create", nil, "Failure preparing request")
			return
		}

		resp, err := client.CreateSender(req)
		if err != nil {
			result.Response = autorest.Response{Response: resp}
			err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Create", resp, "Failure sending request")
			return
		}

		result, err = client.CreateResponder(resp)
		if err != nil {
			err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Create", resp, "Failure responding to request")
		}
	}()
	return resultChan, errChan
}

// CreatePreparer prepares the Create request.
func (client AccountsClient) CreatePreparer(resourceGroupName string, accountName string, parameters AccountCreateParameters, cancel <-chan struct{}) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       autorest.Encode("path", accountName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-06-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPut(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{Cancel: cancel})
}

// CreateSender sends the Create request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) CreateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client,
		req,
		azure.DoPollForAsynchronous(client.PollingDelay))
}

// CreateResponder handles the response to the Create request. The method always
// closes the http.Response Body.
func (client AccountsClient) CreateResponder(resp *http.Response) (result Account, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusAccepted),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Delete deletes a storage account in Microsoft Azure.
//
// resourceGroupName is the name of the resource group within the user's subscription. The name is case insensitive.
// accountName is the name of the storage account within the specified resource group. Storage account names must be
// between 3 and 24 characters in length and use numbers and lower-case letters only.
func (client AccountsClient) Delete(resourceGroupName string, accountName string) (result autorest.Response, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: accountName,
			Constraints: []validation.Constraint{{Target: "accountName", Name: validation.MaxLength, Rule: 24, Chain: nil},
				{Target: "accountName", Name: validation.MinLength, Rule: 3, Chain: nil}}}}); err != nil {
		return result, validation.NewErrorWithValidationError(err, "storage.AccountsClient", "Delete")
	}

	req, err := client.DeletePreparer(resourceGroupName, accountName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Delete", nil, "Failure preparing request")
		return
	}

	resp, err := client.DeleteSender(req)
	if err != nil {
		result.Response = resp
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Delete", resp, "Failure sending request")
		return
	}

	result, err = client.DeleteResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Delete", resp, "Failure responding to request")
	}

	return
}

// DeletePreparer prepares the Delete request.
func (client AccountsClient) DeletePreparer(resourceGroupName string, accountName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       autorest.Encode("path", accountName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-06-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsDelete(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{})
}

// DeleteSender sends the Delete request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) DeleteSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// DeleteResponder handles the response to the Delete request. The method always
// closes the http.Response Body.
func (client AccountsClient) DeleteResponder(resp *http.Response) (result autorest.Response, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK, http.StatusNoContent),
		autorest.ByClosing())
	result.Response = resp
	return
}

// GetProperties returns the properties for the specified storage account including but not limited to name, SKU name,
// location, and account status. The ListKeys operation should be used to retrieve storage keys.
//
// resourceGroupName is the name of the resource group within the user's subscription. The name is case insensitive.
// accountName is the name of the storage account within the specified resource group. Storage account names must be
// between 3 and 24 characters in length and use numbers and lower-case letters only.
func (client AccountsClient) GetProperties(resourceGroupName string, accountName string) (result Account, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: accountName,
			Constraints: []validation.Constraint{{Target: "accountName", Name: validation.MaxLength, Rule: 24, Chain: nil},
				{Target: "accountName", Name: validation.MinLength, Rule: 3, Chain: nil}}}}); err != nil {
		return result, validation.NewErrorWithValidationError(err, "storage.AccountsClient", "GetProperties")
	}

	req, err := client.GetPropertiesPreparer(resourceGroupName, accountName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "GetProperties", nil, "Failure preparing request")
		return
	}

	resp, err := client.GetPropertiesSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "GetProperties", resp, "Failure sending request")
		return
	}

	result, err = client.GetPropertiesResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "GetProperties", resp, "Failure responding to request")
	}

	return
}

// GetPropertiesPreparer prepares the GetProperties request.
func (client AccountsClient) GetPropertiesPreparer(resourceGroupName string, accountName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       autorest.Encode("path", accountName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-06-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{})
}

// GetPropertiesSender sends the GetProperties request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) GetPropertiesSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// GetPropertiesResponder handles the response to the GetProperties request. The method always
// closes the http.Response Body.
func (client AccountsClient) GetPropertiesResponder(resp *http.Response) (result Account, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// List lists all the storage accounts available under the subscription. Note that storage keys are not returned; use
// the ListKeys operation for this.
func (client AccountsClient) List() (result AccountListResult, err error) {
	req, err := client.ListPreparer()
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "List", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "List", resp, "Failure sending request")
		return
	}

	result, err = client.ListResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "List", resp, "Failure responding to request")
	}

	return
}

// ListPreparer prepares the List request.
func (client AccountsClient) ListPreparer() (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"subscriptionId": autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-06-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/providers/Microsoft.Storage/storageAccounts", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{})
}

// ListSender sends the List request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) ListSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// ListResponder handles the response to the List request. The method always
// closes the http.Response Body.
func (client AccountsClient) ListResponder(resp *http.Response) (result AccountListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// ListAccountSAS list SAS credentials of a storage account.
//
// resourceGroupName is the name of the resource group within the user's subscription. The name is case insensitive.
// accountName is the name of the storage account within the specified resource group. Storage account names must be
// between 3 and 24 characters in length and use numbers and lower-case letters only. parameters is the parameters to
// provide to list SAS credentials for the storage account.
func (client AccountsClient) ListAccountSAS(resourceGroupName string, accountName string, parameters AccountSasParameters) (result ListAccountSasResponse, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: accountName,
			Constraints: []validation.Constraint{{Target: "accountName", Name: validation.MaxLength, Rule: 24, Chain: nil},
				{Target: "accountName", Name: validation.MinLength, Rule: 3, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.SharedAccessExpiryTime", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewErrorWithValidationError(err, "storage.AccountsClient", "ListAccountSAS")
	}

	req, err := client.ListAccountSASPreparer(resourceGroupName, accountName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListAccountSAS", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListAccountSASSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListAccountSAS", resp, "Failure sending request")
		return
	}

	result, err = client.ListAccountSASResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListAccountSAS", resp, "Failure responding to request")
	}

	return
}

// ListAccountSASPreparer prepares the ListAccountSAS request.
func (client AccountsClient) ListAccountSASPreparer(resourceGroupName string, accountName string, parameters AccountSasParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       autorest.Encode("path", accountName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-06-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}/ListAccountSas", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{})
}

// ListAccountSASSender sends the ListAccountSAS request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) ListAccountSASSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// ListAccountSASResponder handles the response to the ListAccountSAS request. The method always
// closes the http.Response Body.
func (client AccountsClient) ListAccountSASResponder(resp *http.Response) (result ListAccountSasResponse, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// ListByResourceGroup lists all the storage accounts available under the given resource group. Note that storage keys
// are not returned; use the ListKeys operation for this.
//
// resourceGroupName is the name of the resource group within the user's subscription. The name is case insensitive.
func (client AccountsClient) ListByResourceGroup(resourceGroupName string) (result AccountListResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}}}); err != nil {
		return result, validation.NewErrorWithValidationError(err, "storage.AccountsClient", "ListByResourceGroup")
	}

	req, err := client.ListByResourceGroupPreparer(resourceGroupName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListByResourceGroup", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListByResourceGroupSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListByResourceGroup", resp, "Failure sending request")
		return
	}

	result, err = client.ListByResourceGroupResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListByResourceGroup", resp, "Failure responding to request")
	}

	return
}

// ListByResourceGroupPreparer prepares the ListByResourceGroup request.
func (client AccountsClient) ListByResourceGroupPreparer(resourceGroupName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-06-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsGet(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{})
}

// ListByResourceGroupSender sends the ListByResourceGroup request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) ListByResourceGroupSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// ListByResourceGroupResponder handles the response to the ListByResourceGroup request. The method always
// closes the http.Response Body.
func (client AccountsClient) ListByResourceGroupResponder(resp *http.Response) (result AccountListResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// ListKeys lists the access keys for the specified storage account.
//
// resourceGroupName is the name of the resource group within the user's subscription. The name is case insensitive.
// accountName is the name of the storage account within the specified resource group. Storage account names must be
// between 3 and 24 characters in length and use numbers and lower-case letters only.
func (client AccountsClient) ListKeys(resourceGroupName string, accountName string) (result AccountListKeysResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: accountName,
			Constraints: []validation.Constraint{{Target: "accountName", Name: validation.MaxLength, Rule: 24, Chain: nil},
				{Target: "accountName", Name: validation.MinLength, Rule: 3, Chain: nil}}}}); err != nil {
		return result, validation.NewErrorWithValidationError(err, "storage.AccountsClient", "ListKeys")
	}

	req, err := client.ListKeysPreparer(resourceGroupName, accountName)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListKeys", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListKeysSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListKeys", resp, "Failure sending request")
		return
	}

	result, err = client.ListKeysResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListKeys", resp, "Failure responding to request")
	}

	return
}

// ListKeysPreparer prepares the ListKeys request.
func (client AccountsClient) ListKeysPreparer(resourceGroupName string, accountName string) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       autorest.Encode("path", accountName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-06-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}/listKeys", pathParameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{})
}

// ListKeysSender sends the ListKeys request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) ListKeysSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// ListKeysResponder handles the response to the ListKeys request. The method always
// closes the http.Response Body.
func (client AccountsClient) ListKeysResponder(resp *http.Response) (result AccountListKeysResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// ListServiceSAS list service SAS credentials of a specific resource.
//
// resourceGroupName is the name of the resource group within the user's subscription. The name is case insensitive.
// accountName is the name of the storage account within the specified resource group. Storage account names must be
// between 3 and 24 characters in length and use numbers and lower-case letters only. parameters is the parameters to
// provide to list service SAS credentials.
func (client AccountsClient) ListServiceSAS(resourceGroupName string, accountName string, parameters ServiceSasParameters) (result ListServiceSasResponse, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: accountName,
			Constraints: []validation.Constraint{{Target: "accountName", Name: validation.MaxLength, Rule: 24, Chain: nil},
				{Target: "accountName", Name: validation.MinLength, Rule: 3, Chain: nil}}},
		{TargetValue: parameters,
			Constraints: []validation.Constraint{{Target: "parameters.CanonicalizedResource", Name: validation.Null, Rule: true, Chain: nil},
				{Target: "parameters.Identifier", Name: validation.Null, Rule: false,
					Chain: []validation.Constraint{{Target: "parameters.Identifier", Name: validation.MaxLength, Rule: 64, Chain: nil}}}}}}); err != nil {
		return result, validation.NewErrorWithValidationError(err, "storage.AccountsClient", "ListServiceSAS")
	}

	req, err := client.ListServiceSASPreparer(resourceGroupName, accountName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListServiceSAS", nil, "Failure preparing request")
		return
	}

	resp, err := client.ListServiceSASSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListServiceSAS", resp, "Failure sending request")
		return
	}

	result, err = client.ListServiceSASResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "ListServiceSAS", resp, "Failure responding to request")
	}

	return
}

// ListServiceSASPreparer prepares the ListServiceSAS request.
func (client AccountsClient) ListServiceSASPreparer(resourceGroupName string, accountName string, parameters ServiceSasParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       autorest.Encode("path", accountName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-06-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}/ListServiceSas", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{})
}

// ListServiceSASSender sends the ListServiceSAS request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) ListServiceSASSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// ListServiceSASResponder handles the response to the ListServiceSAS request. The method always
// closes the http.Response Body.
func (client AccountsClient) ListServiceSASResponder(resp *http.Response) (result ListServiceSasResponse, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// RegenerateKey regenerates one of the access keys for the specified storage account.
//
// resourceGroupName is the name of the resource group within the user's subscription. The name is case insensitive.
// accountName is the name of the storage account within the specified resource group. Storage account names must be
// between 3 and 24 characters in length and use numbers and lower-case letters only. regenerateKey is specifies name
// of the key which should be regenerated -- key1 or key2.
func (client AccountsClient) RegenerateKey(resourceGroupName string, accountName string, regenerateKey AccountRegenerateKeyParameters) (result AccountListKeysResult, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: accountName,
			Constraints: []validation.Constraint{{Target: "accountName", Name: validation.MaxLength, Rule: 24, Chain: nil},
				{Target: "accountName", Name: validation.MinLength, Rule: 3, Chain: nil}}},
		{TargetValue: regenerateKey,
			Constraints: []validation.Constraint{{Target: "regenerateKey.KeyName", Name: validation.Null, Rule: true, Chain: nil}}}}); err != nil {
		return result, validation.NewErrorWithValidationError(err, "storage.AccountsClient", "RegenerateKey")
	}

	req, err := client.RegenerateKeyPreparer(resourceGroupName, accountName, regenerateKey)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "RegenerateKey", nil, "Failure preparing request")
		return
	}

	resp, err := client.RegenerateKeySender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "RegenerateKey", resp, "Failure sending request")
		return
	}

	result, err = client.RegenerateKeyResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "RegenerateKey", resp, "Failure responding to request")
	}

	return
}

// RegenerateKeyPreparer prepares the RegenerateKey request.
func (client AccountsClient) RegenerateKeyPreparer(resourceGroupName string, accountName string, regenerateKey AccountRegenerateKeyParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       autorest.Encode("path", accountName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-06-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPost(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}/regenerateKey", pathParameters),
		autorest.WithJSON(regenerateKey),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{})
}

// RegenerateKeySender sends the RegenerateKey request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) RegenerateKeySender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// RegenerateKeyResponder handles the response to the RegenerateKey request. The method always
// closes the http.Response Body.
func (client AccountsClient) RegenerateKeyResponder(resp *http.Response) (result AccountListKeysResult, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}

// Update the update operation can be used to update the SKU, encryption, access tier, or tags for a storage account.
// It can also be used to map the account to a custom domain. Only one custom domain is supported per storage account;
// the replacement/change of custom domain is not supported. In order to replace an old custom domain, the old value
// must be cleared/unregistered before a new value can be set. The update of multiple properties is supported. This
// call does not change the storage keys for the account. If you want to change the storage account keys, use the
// regenerate keys operation. The location and name of the storage account cannot be changed after creation.
//
// resourceGroupName is the name of the resource group within the user's subscription. The name is case insensitive.
// accountName is the name of the storage account within the specified resource group. Storage account names must be
// between 3 and 24 characters in length and use numbers and lower-case letters only. parameters is the parameters to
// provide for the updated account.
func (client AccountsClient) Update(resourceGroupName string, accountName string, parameters AccountUpdateParameters) (result Account, err error) {
	if err := validation.Validate([]validation.Validation{
		{TargetValue: resourceGroupName,
			Constraints: []validation.Constraint{{Target: "resourceGroupName", Name: validation.MaxLength, Rule: 90, Chain: nil},
				{Target: "resourceGroupName", Name: validation.MinLength, Rule: 1, Chain: nil},
				{Target: "resourceGroupName", Name: validation.Pattern, Rule: `^[-\w\._\(\)]+$`, Chain: nil}}},
		{TargetValue: accountName,
			Constraints: []validation.Constraint{{Target: "accountName", Name: validation.MaxLength, Rule: 24, Chain: nil},
				{Target: "accountName", Name: validation.MinLength, Rule: 3, Chain: nil}}}}); err != nil {
		return result, validation.NewErrorWithValidationError(err, "storage.AccountsClient", "Update")
	}

	req, err := client.UpdatePreparer(resourceGroupName, accountName, parameters)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Update", nil, "Failure preparing request")
		return
	}

	resp, err := client.UpdateSender(req)
	if err != nil {
		result.Response = autorest.Response{Response: resp}
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Update", resp, "Failure sending request")
		return
	}

	result, err = client.UpdateResponder(resp)
	if err != nil {
		err = autorest.NewErrorWithError(err, "storage.AccountsClient", "Update", resp, "Failure responding to request")
	}

	return
}

// UpdatePreparer prepares the Update request.
func (client AccountsClient) UpdatePreparer(resourceGroupName string, accountName string, parameters AccountUpdateParameters) (*http.Request, error) {
	pathParameters := map[string]interface{}{
		"accountName":       autorest.Encode("path", accountName),
		"resourceGroupName": autorest.Encode("path", resourceGroupName),
		"subscriptionId":    autorest.Encode("path", client.SubscriptionID),
	}

	const APIVersion = "2017-06-01"
	queryParameters := map[string]interface{}{
		"api-version": APIVersion,
	}

	preparer := autorest.CreatePreparer(
		autorest.AsJSON(),
		autorest.AsPatch(),
		autorest.WithBaseURL(client.BaseURI),
		autorest.WithPathParameters("/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.Storage/storageAccounts/{accountName}", pathParameters),
		autorest.WithJSON(parameters),
		autorest.WithQueryParameters(queryParameters))
	return preparer.Prepare(&http.Request{})
}

// UpdateSender sends the Update request. The method will close the
// http.Response Body if it receives an error.
func (client AccountsClient) UpdateSender(req *http.Request) (*http.Response, error) {
	return autorest.SendWithSender(client, req)
}

// UpdateResponder handles the response to the Update request. The method always
// closes the http.Response Body.
func (client AccountsClient) UpdateResponder(resp *http.Response) (result Account, err error) {
	err = autorest.Respond(
		resp,
		client.ByInspecting(),
		azure.WithErrorUnlessStatusCode(http.StatusOK),
		autorest.ByUnmarshallingJSON(&result),
		autorest.ByClosing())
	result.Response = autorest.Response{Response: resp}
	return
}