/********************************************************************* * Portions COPYRIGHT 2016 STMicroelectronics * * Portions SEGGER Microcontroller GmbH & Co. KG * * Solutions for real time microcontroller applications * ********************************************************************** * * * (c) 1996 - 2015 SEGGER Microcontroller GmbH & Co. KG * * * * Internet: www.segger.com Support: support@segger.com * * * ********************************************************************** ** emWin V5.32 - Graphical user interface for embedded applications ** All Intellectual Property rights in the Software belongs to SEGGER. emWin is protected by international copyright laws. Knowledge of the source code may not be used to write a similar product. This file may only be used in accordance with the following terms: The software has been licensed to STMicroelectronics International N.V. a Dutch company with a Swiss branch and its headquarters in Plan- les-Ouates, Geneva, 39 Chemin du Champ des Filles, Switzerland for the purposes of creating libraries for ARM Cortex-M-based 32-bit microcon_ troller products commercialized by Licensee only, sublicensed and dis_ tributed under the terms and conditions of the End User License Agree_ ment supplied by STMicroelectronics International N.V. Full source code is available at: www.segger.com We appreciate your understanding and fairness. ---------------------------------------------------------------------- File : GUIDRV_Lin_Opt_8.h Purpose : Optimized routines, included by GUIDRV_Lin_..._8.c ---------------------------END-OF-HEADER------------------------------ */ /** ****************************************************************************** * @attention * * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); * You may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.st.com/software_license_agreement_liberty_v2 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ****************************************************************************** */ /********************************************************************* * * Static functions * ********************************************************************** */ /********************************************************************* * * _FillRectOpt8 * * Purpose: * Optimized filling routine for 8 bpp */ static void _FillRectOpt8(GUI_DEVICE * pDevice, int x0, int y0, int x1, int y1) { DRIVER_CONTEXT * pContext; U32 Data, ColorMask, AndMask, Off0, OffLine; int NumPixel_0, NumPixel_1, RemPixels, NumLines, RemLines, RemItems; LCD_PIXELINDEX ColorIndex; U32 * pDest; pContext = (DRIVER_CONTEXT *)pDevice->u.pContext; ColorIndex = LCD__GetColorIndex(); Off0 = XY2OFF32(pContext->vxSizePhys, x0, y0); RemPixels = x1 - x0 + 1; NumLines = y1 - y0 + 1; OffLine = pContext->vxSizePhys >> 2; NumPixel_0 = x0 & 3; NumPixel_1 = x1 & 3; if (GUI_pContext->DrawMode & LCD_DRAWMODE_XOR) { // // First DWORD // if (NumPixel_0) { for (RemLines = NumLines; RemLines; RemLines--) { pDest = ((U32 *)pContext->VRAMAddr) + Off0 + OffLine * (RemLines - 1); AndMask = ~(0xFFFFFFFF << (8 * NumPixel_0)); if ((RemPixels < 3) && (NumPixel_1)) { AndMask |= ~(0xFFFFFFFF >> (8 * (3 - NumPixel_1))); } #if (LCD_ENDIAN_BIG == 1) MIRROR(AndMask); #endif Data = READ_MEM32P(pDest); Data ^= ~AndMask; WRITE_MEM32P(pDest, Data); } Off0++; RemPixels -= (4 - NumPixel_0); } // // Complete DWORDS // if (RemPixels >= 4) { for (RemLines = NumLines; RemLines; RemLines--) { RemItems = RemPixels; pDest = ((U32 *)pContext->VRAMAddr) + Off0 + OffLine * (RemLines - 1); while (RemItems >= 4) { Data = READ_MEM32P(pDest); Data ^= 0xFFFFFFFF; WRITE_MEM32P(pDest, Data); pDest++; RemItems -= 4; } } Off0 += (RemPixels >> 2); RemPixels -= (RemPixels >> 2) << 2; } // // Last DWORD // if (RemPixels > 0) { for (RemLines = NumLines; RemLines; RemLines--) { pDest = ((U32 *)pContext->VRAMAddr) + Off0 + OffLine * (RemLines - 1); AndMask = 0xFFFFFF00 << (8 * NumPixel_1); #if (LCD_ENDIAN_BIG == 1) MIRROR(AndMask); #endif Data = READ_MEM32P(pDest); Data ^= ~AndMask; WRITE_MEM32P(pDest, Data); } } } else { // // First DWORD // if (NumPixel_0) { for (RemLines = NumLines; RemLines; RemLines--) { pDest = ((U32 *)pContext->VRAMAddr) + Off0 + OffLine * (RemLines - 1); AndMask = ~(0xFFFFFFFF << (8 * NumPixel_0)); if ((RemPixels < 3) && (NumPixel_1)) { AndMask |= ~(0xFFFFFFFF >> (8 * (3 - NumPixel_1))); } ColorMask = (ColorIndex * 0x01010101) & ~AndMask; #if (LCD_ENDIAN_BIG == 1) MIRROR(AndMask); MIRROR(ColorMask); #endif Data = READ_MEM32P(pDest); Data &= AndMask; Data |= ColorMask; WRITE_MEM32P(pDest, Data); } Off0++; RemPixels -= (4 - NumPixel_0); } // // Complete DWORDS // if (RemPixels >= 4) { ColorMask = ColorIndex * 0x01010101; for (RemLines = NumLines; RemLines; RemLines--) { RemItems = RemPixels; pDest = ((U32 *)pContext->VRAMAddr) + Off0 + OffLine * (RemLines - 1); while (RemItems >= 32) { WRITE_MEM32P(pDest , ColorMask); WRITE_MEM32P(pDest + 1, ColorMask); WRITE_MEM32P(pDest + 2, ColorMask); WRITE_MEM32P(pDest + 3, ColorMask); WRITE_MEM32P(pDest + 4, ColorMask); WRITE_MEM32P(pDest + 5, ColorMask); WRITE_MEM32P(pDest + 6, ColorMask); WRITE_MEM32P(pDest + 7, ColorMask); pDest += 8; RemItems -= 32; } while (RemItems >= 4) { WRITE_MEM32P(pDest, ColorMask); pDest++; RemItems -= 4; } } Off0 += (RemPixels >> 2); RemPixels -= (RemPixels >> 2) << 2; } // // Last DWORD // if (RemPixels > 0) { for (RemLines = NumLines; RemLines; RemLines--) { pDest = ((U32 *)pContext->VRAMAddr) + Off0 + OffLine * (RemLines - 1); AndMask = 0xFFFFFF00 << (8 * NumPixel_1); ColorMask = (ColorIndex * 0x01010101) & ~AndMask; #if (LCD_ENDIAN_BIG == 1) MIRROR(AndMask); MIRROR(ColorMask); #endif Data = READ_MEM32P(pDest); Data &= AndMask; Data |= ColorMask; WRITE_MEM32P(pDest, Data); } } } } /*************************** End of file ****************************/