/**
******************************************************************************
* @file stm32f7xx_hal_hash_ex.c
* @author MCD Application Team
* @brief Extended HASH HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the HASH peripheral for SHA-224 and SHA-256
* alogrithms:
* + HASH or HMAC processing in polling mode
* + HASH or HMAC processing in interrupt mode
* + HASH or HMAC processing in DMA mode
* Additionally, this file provides functions to manage HMAC
* multi-buffer DMA-based processing for MD-5, SHA-1, SHA-224
* and SHA-256.
*
*
@verbatim
===============================================================================
##### HASH peripheral extended features #####
===============================================================================
[..]
The SHA-224 and SHA-256 HASH and HMAC processing can be carried out exactly
the same way as for SHA-1 or MD-5 algorithms.
(#) Three modes are available.
(##) Polling mode: processing APIs are blocking functions
i.e. they process the data and wait till the digest computation is finished,
e.g. HAL_HASHEx_xxx_Start()
(##) Interrupt mode: processing APIs are not blocking functions
i.e. they process the data under interrupt,
e.g. HAL_HASHEx_xxx_Start_IT()
(##) DMA mode: processing APIs are not blocking functions and the CPU is
not used for data transfer i.e. the data transfer is ensured by DMA,
e.g. HAL_HASHEx_xxx_Start_DMA(). Note that in DMA mode, a call to
HAL_HASHEx_xxx_Finish() is then required to retrieve the digest.
(#)Multi-buffer processing is possible in polling and DMA mode.
(##) In polling mode, only multi-buffer HASH processing is possible.
API HAL_HASHEx_xxx_Accumulate() must be called for each input buffer, except for the last one.
User must resort to HAL_HASHEx_xxx_Start() to enter the last one and retrieve as
well the computed digest.
(##) In DMA mode, multi-buffer HASH and HMAC processing are possible.
(+++) HASH processing: once initialization is done, MDMAT bit must be set thru __HAL_HASH_SET_MDMAT() macro.
From that point, each buffer can be fed to the IP thru HAL_HASHEx_xxx_Start_DMA() API.
Before entering the last buffer, reset the MDMAT bit with __HAL_HASH_RESET_MDMAT()
macro then wrap-up the HASH processing in feeding the last input buffer thru the
same API HAL_HASHEx_xxx_Start_DMA(). The digest can then be retrieved with a call to
API HAL_HASHEx_xxx_Finish().
(+++) HMAC processing (MD-5, SHA-1, SHA-224 and SHA-256 must all resort to
extended functions): after initialization, the key and the first input buffer are entered
in the IP with the API HAL_HMACEx_xxx_Step1_2_DMA(). This carries out HMAC step 1 and
starts step 2.
The following buffers are next entered with the API HAL_HMACEx_xxx_Step2_DMA(). At this
point, the HMAC processing is still carrying out step 2.
Then, step 2 for the last input buffer and step 3 are carried out by a single call
to HAL_HMACEx_xxx_Step2_3_DMA().
The digest can finally be retrieved with a call to API HAL_HASH_xxx_Finish() for
MD-5 and SHA-1, to HAL_HASHEx_xxx_Finish() for SHA-224 and SHA-256.
@endverbatim
******************************************************************************
* @attention
*
*
© Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_hal.h"
/** @addtogroup STM32F7xx_HAL_Driver
* @{
*/
#if defined (HASH)
/** @defgroup HASHEx HASHEx
* @brief HASH HAL extended module driver.
* @{
*/
#ifdef HAL_HASH_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/** @defgroup HASHEx_Exported_Functions HASH Extended Exported Functions
* @{
*/
/** @defgroup HASHEx_Exported_Functions_Group1 HASH extended processing functions in polling mode
* @brief HASH extended processing functions using polling mode.
*
@verbatim
===============================================================================
##### Polling mode HASH extended processing functions #####
===============================================================================
[..] This section provides functions allowing to calculate in polling mode
the hash value using one of the following algorithms:
(+) SHA224
(++) HAL_HASHEx_SHA224_Start()
(++) HAL_HASHEx_SHA224_Accumulate()
(+) SHA256
(++) HAL_HASHEx_SHA256_Start()
(++) HAL_HASHEx_SHA256_Accumulate()
[..] For a single buffer to be hashed, user can resort to HAL_HASH_xxx_Start().
[..] In case of multi-buffer HASH processing (a single digest is computed while
several buffers are fed to the IP), the user can resort to successive calls
to HAL_HASHEx_xxx_Accumulate() and wrap-up the digest computation by a call
to HAL_HASHEx_xxx_Start().
@endverbatim
* @{
*/
/**
* @brief Initialize the HASH peripheral in SHA224 mode, next process pInBuffer then
* read the computed digest.
* @note Digest is available in pOutBuffer.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (buffer to be hashed).
* @param Size: length of the input buffer in bytes.
* @param pOutBuffer: pointer to the computed digest. Digest size is 28 bytes.
* @param Timeout: Timeout value
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
{
return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA224);
}
/**
* @brief If not already done, initialize the HASH peripheral in SHA224 mode then
* processes pInBuffer.
* @note Consecutive calls to HAL_HASHEx_SHA224_Accumulate() can be used to feed
* several input buffers back-to-back to the IP that will yield a single
* HASH signature once all buffers have been entered. Wrap-up of input
* buffers feeding and retrieval of digest is done by a call to
* HAL_HASHEx_SHA224_Start().
* @note Field hhash->Phase of HASH handle is tested to check whether or not
* the IP has already been initialized.
* @note Digest is not retrieved by this API, user must resort to HAL_HASHEx_SHA224_Start()
* to read it, feeding at the same time the last input buffer to the IP.
* @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
* HASH digest computation is corrupted. Only HAL_HASHEx_SHA224_Start() is able
* to manage the ending buffer with a length in bytes not a multiple of 4.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (buffer to be hashed).
* @param Size: length of the input buffer in bytes, must be a multiple of 4.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HASHEx_SHA224_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
return HASH_Accumulate(hhash, pInBuffer, Size,HASH_ALGOSELECTION_SHA224);
}
/**
* @brief Initialize the HASH peripheral in SHA256 mode, next process pInBuffer then
* read the computed digest.
* @note Digest is available in pOutBuffer.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (buffer to be hashed).
* @param Size: length of the input buffer in bytes.
* @param pOutBuffer: pointer to the computed digest. Digest size is 32 bytes.
* @param Timeout: Timeout value
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
{
return HASH_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA256);
}
/**
* @brief If not already done, initialize the HASH peripheral in SHA256 mode then
* processes pInBuffer.
* @note Consecutive calls to HAL_HASHEx_SHA256_Accumulate() can be used to feed
* several input buffers back-to-back to the IP that will yield a single
* HASH signature once all buffers have been entered. Wrap-up of input
* buffers feeding and retrieval of digest is done by a call to
* HAL_HASHEx_SHA256_Start().
* @note Field hhash->Phase of HASH handle is tested to check whether or not
* the IP has already been initialized.
* @note Digest is not retrieved by this API, user must resort to HAL_HASHEx_SHA256_Start()
* to read it, feeding at the same time the last input buffer to the IP.
* @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
* HASH digest computation is corrupted. Only HAL_HASHEx_SHA256_Start() is able
* to manage the ending buffer with a length in bytes not a multiple of 4.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (buffer to be hashed).
* @param Size: length of the input buffer in bytes, must be a multiple of 4.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HASHEx_SHA256_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
return HASH_Accumulate(hhash, pInBuffer, Size,HASH_ALGOSELECTION_SHA256);
}
/**
* @}
*/
/** @defgroup HASHEx_Exported_Functions_Group2 HASH extended processing functions in interrupt mode
* @brief HASH extended processing functions using interrupt mode.
*
@verbatim
===============================================================================
##### Interruption mode HASH extended processing functions #####
===============================================================================
[..] This section provides functions allowing to calculate in interrupt mode
the hash value using one of the following algorithms:
(+) SHA224
(++) HAL_HASHEx_SHA224_Start_IT()
(+) SHA256
(++) HAL_HASHEx_SHA256_Start_IT()
@endverbatim
* @{
*/
/**
* @brief Initialize the HASH peripheral in SHA224 mode, next process pInBuffer then
* read the computed digest in interruption mode.
* @note Digest is available in pOutBuffer.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (buffer to be hashed).
* @param Size: length of the input buffer in bytes.
* @param pOutBuffer: pointer to the computed digest. Digest size is 28 bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
{
return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer,HASH_ALGOSELECTION_SHA224);
}
/**
* @brief Initialize the HASH peripheral in SHA256 mode, next process pInBuffer then
* read the computed digest in interruption mode.
* @note Digest is available in pOutBuffer.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (buffer to be hashed).
* @param Size: length of the input buffer in bytes.
* @param pOutBuffer: pointer to the computed digest. Digest size is 32 bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
{
return HASH_Start_IT(hhash, pInBuffer, Size, pOutBuffer,HASH_ALGOSELECTION_SHA256);
}
/**
* @}
*/
/** @defgroup HASHEx_Exported_Functions_Group3 HASH extended processing functions in DMA mode
* @brief HASH extended processing functions using DMA mode.
*
@verbatim
===============================================================================
##### DMA mode HASH extended processing functionss #####
===============================================================================
[..] This section provides functions allowing to calculate in DMA mode
the hash value using one of the following algorithms:
(+) SHA224
(++) HAL_HASHEx_SHA224_Start_DMA()
(++) HAL_HASHEx_SHA224_Finish()
(+) SHA256
(++) HAL_HASHEx_SHA256_Start_DMA()
(++) HAL_HASHEx_SHA256_Finish()
[..] When resorting to DMA mode to enter the data in the IP, user must resort
to HAL_HASHEx_xxx_Start_DMA() then read the resulting digest with
HAL_HASHEx_xxx_Finish().
[..] In case of multi-buffer HASH processing, MDMAT bit must first be set before
the successive calls to HAL_HASHEx_xxx_Start_DMA(). Then, MDMAT bit needs to be
reset before the last call to HAL_HASHEx_xxx_Start_DMA(). Digest is finally
retrieved thanks to HAL_HASHEx_xxx_Finish().
@endverbatim
* @{
*/
/**
* @brief Initialize the HASH peripheral in SHA224 mode then initiate a DMA transfer
* to feed the input buffer to the IP.
* @note Once the DMA transfer is finished, HAL_HASHEx_SHA224_Finish() API must
* be called to retrieve the computed digest.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (buffer to be hashed).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
return HASH_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224);
}
/**
* @brief Return the computed digest in SHA224 mode.
* @note The API waits for DCIS to be set then reads the computed digest.
* @note HAL_HASHEx_SHA224_Finish() can be used as well to retrieve the digest in
* HMAC SHA224 mode.
* @param hhash: HASH handle.
* @param pOutBuffer: pointer to the computed digest. Digest size is 28 bytes.
* @param Timeout: Timeout value.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
{
return HASH_Finish(hhash, pOutBuffer, Timeout);
}
/**
* @brief Initialize the HASH peripheral in SHA256 mode then initiate a DMA transfer
* to feed the input buffer to the IP.
* @note Once the DMA transfer is finished, HAL_HASHEx_SHA256_Finish() API must
* be called to retrieve the computed digest.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (buffer to be hashed).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
return HASH_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256);
}
/**
* @brief Return the computed digest in SHA256 mode.
* @note The API waits for DCIS to be set then reads the computed digest.
* @note HAL_HASHEx_SHA256_Finish() can be used as well to retrieve the digest in
* HMAC SHA256 mode.
* @param hhash: HASH handle.
* @param pOutBuffer: pointer to the computed digest. Digest size is 32 bytes.
* @param Timeout: Timeout value.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
{
return HASH_Finish(hhash, pOutBuffer, Timeout);
}
/**
* @}
*/
/** @defgroup HASHEx_Exported_Functions_Group4 HMAC extended processing functions in polling mode
* @brief HMAC extended processing functions using polling mode.
*
@verbatim
===============================================================================
##### Polling mode HMAC extended processing functions #####
===============================================================================
[..] This section provides functions allowing to calculate in polling mode
the HMAC value using one of the following algorithms:
(+) SHA224
(++) HAL_HMACEx_SHA224_Start()
(+) SHA256
(++) HAL_HMACEx_SHA256_Start()
@endverbatim
* @{
*/
/**
* @brief Initialize the HASH peripheral in HMAC SHA224 mode, next process pInBuffer then
* read the computed digest.
* @note Digest is available in pOutBuffer.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (buffer to be hashed).
* @param Size: length of the input buffer in bytes.
* @param pOutBuffer: pointer to the computed digest. Digest size is 28 bytes.
* @param Timeout: Timeout value.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
{
return HMAC_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA224);
}
/**
* @brief Initialize the HASH peripheral in HMAC SHA256 mode, next process pInBuffer then
* read the computed digest.
* @note Digest is available in pOutBuffer.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (buffer to be hashed).
* @param Size: length of the input buffer in bytes.
* @param pOutBuffer: pointer to the computed digest. Digest size is 32 bytes.
* @param Timeout: Timeout value.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
{
return HMAC_Start(hhash, pInBuffer, Size, pOutBuffer, Timeout, HASH_ALGOSELECTION_SHA256);
}
/**
* @}
*/
/** @defgroup HASHEx_Exported_Functions_Group5 HMAC extended processing functions in interrupt mode
* @brief HMAC extended processing functions using interruption mode.
*
@verbatim
===============================================================================
##### Interrupt mode HMAC extended processing functions #####
===============================================================================
[..] This section provides functions allowing to calculate in interrupt mode
the HMAC value using one of the following algorithms:
(+) SHA224
(++) HAL_HMACEx_SHA224_Start_IT()
(+) SHA256
(++) HAL_HMACEx_SHA256_Start_IT()
@endverbatim
* @{
*/
/**
* @brief Initialize the HASH peripheral in HMAC SHA224 mode, next process pInBuffer then
* read the computed digest in interrupt mode.
* @note Digest is available in pOutBuffer.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (buffer to be hashed).
* @param Size: length of the input buffer in bytes.
* @param pOutBuffer: pointer to the computed digest. Digest size is 28 bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
{
return HMAC_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA224);
}
/**
* @brief Initialize the HASH peripheral in HMAC SHA256 mode, next process pInBuffer then
* read the computed digest in interrupt mode.
* @note Digest is available in pOutBuffer.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (buffer to be hashed).
* @param Size: length of the input buffer in bytes.
* @param pOutBuffer: pointer to the computed digest. Digest size is 32 bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
{
return HMAC_Start_IT(hhash, pInBuffer, Size, pOutBuffer, HASH_ALGOSELECTION_SHA256);
}
/**
* @}
*/
/** @defgroup HASHEx_Exported_Functions_Group6 HMAC extended processing functions in DMA mode
* @brief HMAC extended processing functions using DMA mode.
*
@verbatim
===============================================================================
##### DMA mode HMAC extended processing functions #####
===============================================================================
[..] This section provides functions allowing to calculate in DMA mode
the HMAC value using one of the following algorithms:
(+) SHA224
(++) HAL_HMACEx_SHA224_Start_DMA()
(+) SHA256
(++) HAL_HMACEx_SHA256_Start_DMA()
[..] When resorting to DMA mode to enter the data in the IP for HMAC processing,
user must resort to HAL_HMACEx_xxx_Start_DMA() then read the resulting digest
with HAL_HASHEx_xxx_Finish().
@endverbatim
* @{
*/
/**
* @brief Initialize the HASH peripheral in HMAC SHA224 mode then initiate the required
* DMA transfers to feed the key and the input buffer to the IP.
* @note Once the DMA transfers are finished (indicated by hhash->State set back
* to HAL_HASH_STATE_READY), HAL_HASHEx_SHA224_Finish() API must be called to retrieve
* the computed digest.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @note If MDMAT bit is set before calling this function (multi-buffer
* HASH processing case), the input buffer size (in bytes) must be
* a multiple of 4 otherwise, the HASH digest computation is corrupted.
* For the processing of the last buffer of the thread, MDMAT bit must
* be reset and the buffer length (in bytes) doesn't have to be a
* multiple of 4.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (buffer to be hashed).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224);
}
/**
* @brief Initialize the HASH peripheral in HMAC SHA224 mode then initiate the required
* DMA transfers to feed the key and the input buffer to the IP.
* @note Once the DMA transfers are finished (indicated by hhash->State set back
* to HAL_HASH_STATE_READY), HAL_HASHEx_SHA256_Finish() API must be called to retrieve
* the computed digest.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @note If MDMAT bit is set before calling this function (multi-buffer
* HASH processing case), the input buffer size (in bytes) must be
* a multiple of 4 otherwise, the HASH digest computation is corrupted.
* For the processing of the last buffer of the thread, MDMAT bit must
* be reset and the buffer length (in bytes) doesn't have to be a
* multiple of 4.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (buffer to be hashed).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256);
}
/**
* @}
*/
/** @defgroup HASHEx_Exported_Functions_Group7 Multi-buffer HMAC extended processing functions in DMA mode
* @brief HMAC extended processing functions in multi-buffer DMA mode.
*
@verbatim
===============================================================================
##### Multi-buffer DMA mode HMAC extended processing functions #####
===============================================================================
[..] This section provides functions to manage HMAC multi-buffer
DMA-based processing for MD5, SHA1, SHA224 and SHA256 algorithms.
(+) MD5
(++) HAL_HMACEx_MD5_Step1_2_DMA()
(++) HAL_HMACEx_MD5_Step2_DMA()
(++) HAL_HMACEx_MD5_Step2_3_DMA()
(+) SHA1
(++) HAL_HMACEx_SHA1_Step1_2_DMA()
(++) HAL_HMACEx_SHA1_Step2_DMA()
(++) HAL_HMACEx_SHA1_Step2_3_DMA()
(+) SHA256
(++) HAL_HMACEx_SHA224_Step1_2_DMA()
(++) HAL_HMACEx_SHA224_Step2_DMA()
(++) HAL_HMACEx_SHA224_Step2_3_DMA()
(+) SHA256
(++) HAL_HMACEx_SHA256_Step1_2_DMA()
(++) HAL_HMACEx_SHA256_Step2_DMA()
(++) HAL_HMACEx_SHA256_Step2_3_DMA()
[..] User must first start-up the multi-buffer DMA-based HMAC computation in
calling HAL_HMACEx_xxx_Step1_2_DMA(). This carries out HMAC step 1 and
intiates step 2 with the first input buffer.
[..] The following buffers are next fed to the IP with a call to the API
HAL_HMACEx_xxx_Step2_DMA(). There may be several consecutive calls
to this API.
[..] Multi-buffer DMA-based HMAC computation is wrapped up by a call to
HAL_HMACEx_xxx_Step2_3_DMA(). This finishes step 2 in feeding the last input
buffer to the IP then carries out step 3.
[..] Digest is retrieved by a call to HAL_HASH_xxx_Finish() for MD-5 or
SHA-1, to HAL_HASHEx_xxx_Finish() for SHA-224 or SHA-256.
[..] If only two buffers need to be consecutively processed, a call to
HAL_HMACEx_xxx_Step1_2_DMA() followed by a call to HAL_HMACEx_xxx_Step2_3_DMA()
is sufficient.
@endverbatim
* @{
*/
/**
* @brief MD5 HMAC step 1 completion and step 2 start in multi-buffer DMA mode.
* @note Step 1 consists in writing the inner hash function key in the IP,
* step 2 consists in writing the message text.
* @note The API carries out the HMAC step 1 then starts step 2 with
* the first buffer entered to the IP. DCAL bit is not automatically set after
* the message buffer feeding, allowing other messages DMA transfers to occur.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
* HASH digest computation is corrupted.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (message buffer).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_MD5_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
hhash->DigestCalculationDisable = SET;
return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5);
}
/**
* @brief MD5 HMAC step 2 in multi-buffer DMA mode.
* @note Step 2 consists in writing the message text in the IP.
* @note The API carries on the HMAC step 2, applied to the buffer entered as input
* parameter. DCAL bit is not automatically set after the message buffer feeding,
* allowing other messages DMA transfers to occur.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
* HASH digest computation is corrupted.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (message buffer).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_MD5_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
if (hhash->DigestCalculationDisable != SET)
{
return HAL_ERROR;
}
return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5);
}
/**
* @brief MD5 HMAC step 2 wrap-up and step 3 completion in multi-buffer DMA mode.
* @note Step 2 consists in writing the message text in the IP,
* step 3 consists in writing the outer hash function key.
* @note The API wraps up the HMAC step 2 in processing the buffer entered as input
* parameter (the input buffer must be the last one of the multi-buffer thread)
* then carries out HMAC step 3.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @note Once the DMA transfers are finished (indicated by hhash->State set back
* to HAL_HASH_STATE_READY), HAL_HASHEx_SHA256_Finish() API must be called to retrieve
* the computed digest.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (message buffer).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_MD5_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
hhash->DigestCalculationDisable = RESET;
return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_MD5);
}
/**
* @brief SHA1 HMAC step 1 completion and step 2 start in multi-buffer DMA mode.
* @note Step 1 consists in writing the inner hash function key in the IP,
* step 2 consists in writing the message text.
* @note The API carries out the HMAC step 1 then starts step 2 with
* the first buffer entered to the IP. DCAL bit is not automatically set after
* the message buffer feeding, allowing other messages DMA transfers to occur.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
* HASH digest computation is corrupted.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (message buffer).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_SHA1_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
hhash->DigestCalculationDisable = SET;
return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1);
}
/**
* @brief SHA1 HMAC step 2 in multi-buffer DMA mode.
* @note Step 2 consists in writing the message text in the IP.
* @note The API carries on the HMAC step 2, applied to the buffer entered as input
* parameter. DCAL bit is not automatically set after the message buffer feeding,
* allowing other messages DMA transfers to occur.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
* HASH digest computation is corrupted.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (message buffer).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_SHA1_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
if (hhash->DigestCalculationDisable != SET)
{
return HAL_ERROR;
}
return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1);
}
/**
* @brief SHA1 HMAC step 2 wrap-up and step 3 completion in multi-buffer DMA mode.
* @note Step 2 consists in writing the message text in the IP,
* step 3 consists in writing the outer hash function key.
* @note The API wraps up the HMAC step 2 in processing the buffer entered as input
* parameter (the input buffer must be the last one of the multi-buffer thread)
* then carries out HMAC step 3.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @note Once the DMA transfers are finished (indicated by hhash->State set back
* to HAL_HASH_STATE_READY), HAL_HASHEx_SHA256_Finish() API must be called to retrieve
* the computed digest.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (message buffer).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_SHA1_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
hhash->DigestCalculationDisable = RESET;
return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA1);
}
/**
* @brief SHA224 HMAC step 1 completion and step 2 start in multi-buffer DMA mode.
* @note Step 1 consists in writing the inner hash function key in the IP,
* step 2 consists in writing the message text.
* @note The API carries out the HMAC step 1 then starts step 2 with
* the first buffer entered to the IP. DCAL bit is not automatically set after
* the message buffer feeding, allowing other messages DMA transfers to occur.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
* HASH digest computation is corrupted.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (message buffer).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_SHA224_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
hhash->DigestCalculationDisable = SET;
return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224);
}
/**
* @brief SHA224 HMAC step 2 in multi-buffer DMA mode.
* @note Step 2 consists in writing the message text in the IP.
* @note The API carries on the HMAC step 2, applied to the buffer entered as input
* parameter. DCAL bit is not automatically set after the message buffer feeding,
* allowing other messages DMA transfers to occur.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
* HASH digest computation is corrupted.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (message buffer).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_SHA224_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
if (hhash->DigestCalculationDisable != SET)
{
return HAL_ERROR;
}
return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224);
}
/**
* @brief SHA224 HMAC step 2 wrap-up and step 3 completion in multi-buffer DMA mode.
* @note Step 2 consists in writing the message text in the IP,
* step 3 consists in writing the outer hash function key.
* @note The API wraps up the HMAC step 2 in processing the buffer entered as input
* parameter (the input buffer must be the last one of the multi-buffer thread)
* then carries out HMAC step 3.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @note Once the DMA transfers are finished (indicated by hhash->State set back
* to HAL_HASH_STATE_READY), HAL_HASHEx_SHA256_Finish() API must be called to retrieve
* the computed digest.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (message buffer).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_SHA224_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
hhash->DigestCalculationDisable = RESET;
return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA224);
}
/**
* @brief SHA256 HMAC step 1 completion and step 2 start in multi-buffer DMA mode.
* @note Step 1 consists in writing the inner hash function key in the IP,
* step 2 consists in writing the message text.
* @note The API carries out the HMAC step 1 then starts step 2 with
* the first buffer entered to the IP. DCAL bit is not automatically set after
* the message buffer feeding, allowing other messages DMA transfers to occur.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
* HASH digest computation is corrupted.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (message buffer).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_SHA256_Step1_2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
hhash->DigestCalculationDisable = SET;
return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256);
}
/**
* @brief SHA256 HMAC step 2 in multi-buffer DMA mode.
* @note Step 2 consists in writing the message text in the IP.
* @note The API carries on the HMAC step 2, applied to the buffer entered as input
* parameter. DCAL bit is not automatically set after the message buffer feeding,
* allowing other messages DMA transfers to occur.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @note The input buffer size (in bytes) must be a multiple of 4 otherwise, the
* HASH digest computation is corrupted.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (message buffer).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_SHA256_Step2_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
if (hhash->DigestCalculationDisable != SET)
{
return HAL_ERROR;
}
return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256);
}
/**
* @brief SHA256 HMAC step 2 wrap-up and step 3 completion in multi-buffer DMA mode.
* @note Step 2 consists in writing the message text in the IP,
* step 3 consists in writing the outer hash function key.
* @note The API wraps up the HMAC step 2 in processing the buffer entered as input
* parameter (the input buffer must be the last one of the multi-buffer thread)
* then carries out HMAC step 3.
* @note Same key is used for the inner and the outer hash functions; pointer to key and
* key size are respectively stored in hhash->Init.pKey and hhash->Init.KeySize.
* @note Once the DMA transfers are finished (indicated by hhash->State set back
* to HAL_HASH_STATE_READY), HAL_HASHEx_SHA256_Finish() API must be called to retrieve
* the computed digest.
* @param hhash: HASH handle.
* @param pInBuffer: pointer to the input buffer (message buffer).
* @param Size: length of the input buffer in bytes.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_HMACEx_SHA256_Step2_3_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
{
hhash->DigestCalculationDisable = RESET;
return HMAC_Start_DMA(hhash, pInBuffer, Size, HASH_ALGOSELECTION_SHA256);
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_HASH_MODULE_ENABLED */
/**
* @}
*/
#endif /* HASH*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/