/** ****************************************************************************** * @file stm32469i_eval_qspi.h * @author MCD Application Team * @version V1.0.1 * @date 29-September-2015 * @brief This file contains the common defines and functions prototypes for * the stm32469i_eval_qspi.c driver. ****************************************************************************** * @attention * *

© COPYRIGHT(c) 2015 STMicroelectronics

* * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /** @addtogroup BSP * @{ */ /** @addtogroup STM32469I_EVAL * @{ */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32469I_EVAL_QSPI_H #define __STM32469I_EVAL_QSPI_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" #include "../Components/s25fl512s/s25fl512s.h" #include "../Components/n25q512a/n25q512a.h" /** @addtogroup STM32469I_EVAL_QSPI * @{ */ /* Exported constants --------------------------------------------------------*/ /** @defgroup STM32446E_EVAL_QSPI_Exported_Constants Exported Constants * @{ */ /* QSPI Error codes */ #define QSPI_OK ((uint8_t)0x00) #define QSPI_ERROR ((uint8_t)0x01) #define QSPI_BUSY ((uint8_t)0x02) #define QSPI_NOT_SUPPORTED ((uint8_t)0x04) #define QSPI_SUSPENDED ((uint8_t)0x08) #define QSPI_PROTECTED ((uint8_t)0x10) #define QSPI_S25FL512S ((uint8_t)0x20) #define QSPI_N25Q512A ((uint8_t)0x40) /* Definition for QSPI clock resources */ #define QSPI_CLK_ENABLE() __HAL_RCC_QSPI_CLK_ENABLE() #define QSPI_CLK_DISABLE() __HAL_RCC_QSPI_CLK_DISABLE() #define QSPI_CS_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE() #define QSPI_CS_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE() #define QSPI_DX_CLK_GPIO_CLK_ENABLE() __HAL_RCC_GPIOF_CLK_ENABLE() #define QSPI_DX_CLK_GPIO_CLK_DISABLE() __HAL_RCC_GPIOF_CLK_DISABLE() #define QSPI_FORCE_RESET() __HAL_RCC_QSPI_FORCE_RESET() #define QSPI_RELEASE_RESET() __HAL_RCC_QSPI_RELEASE_RESET() /* Definition for QSPI Pins */ #define QSPI_CS_PIN GPIO_PIN_6 #define QSPI_CS_GPIO_PORT GPIOB #define QSPI_CLK_PIN GPIO_PIN_10 #define QSPI_CLK_GPIO_PORT GPIOF #define QSPI_D0_PIN GPIO_PIN_8 #define QSPI_D1_PIN GPIO_PIN_9 #define QSPI_D2_PIN GPIO_PIN_7 #define QSPI_D3_PIN GPIO_PIN_6 #define QSPI_DX_GPIO_PORT GPIOF /** * @} */ /* Exported types ------------------------------------------------------------*/ /** @defgroup STM32446E_EVAL_QSPI_Exported_Types Exported Types * @{ */ /** * @brief QSPI Info * */ typedef struct { uint32_t FlashSize; /*!< Size of the flash */ uint32_t EraseSectorSize; /*!< Size of sectors for the erase operation */ uint32_t EraseSectorsNumber; /*!< Number of sectors for the erase operation */ uint32_t ProgPageSize; /*!< Size of pages for the program operation */ uint32_t ProgPagesNumber; /*!< Number of pages for the program operation */ uint32_t DummyCyclesRead; /*!< Number of dummy read cycles */ uint8_t ManufID; /*!< Manufacturor value */ uint32_t SectorEraseMaxTime; /*!< Sector Erase max value */ uint32_t BulkEraseMaxTime; /*!< Bulk Erase Max Time */ } QSPI_InfoTypeDef; /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup STM32446E_EVAL_QSPI_Exported_Functions * @{ */ uint8_t BSP_QSPI_Init (void); uint8_t BSP_QSPI_DeInit (void); uint8_t BSP_QSPI_Read (uint8_t* pData, uint32_t ReadAddr, uint32_t Size); uint8_t BSP_QSPI_Write (uint8_t* pData, uint32_t WriteAddr, uint32_t Size); uint8_t BSP_QSPI_Erase_Block(uint32_t BlockAddress); uint8_t BSP_QSPI_Erase_Chip (void); uint8_t BSP_QSPI_GetStatus (void); uint8_t BSP_QSPI_GetInfo (QSPI_InfoTypeDef* pInfo); uint8_t BSP_QSPI_MemoryMappedMode(void); /* These function can be modified in case the current settings (e.g. DMA stream) need to be changed for specific application needs */ void BSP_QSPI_MspInit(QSPI_HandleTypeDef *hqspi, void *Params); void BSP_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi, void *Params); /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32446E_EVAL_QSPI_H */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/