diff --git a/PTDN/docs/Untitled.ipynb b/PTDN/docs/Untitled.ipynb deleted file mode 100644 index 0f1c530fd52a01018bc95275fefeaae3af1b65f3..0000000000000000000000000000000000000000 --- a/PTDN/docs/Untitled.ipynb +++ /dev/null @@ -1,240 +0,0 @@ -{ - "cells": [ - { - "cell_type": "markdown", - "id": "7a4812c2", - "metadata": {}, - "source": [ - "# Lite预测功能测试\n", - "\n", - "Lite预测功能测试的主程序为`test_lite.sh`，可以测试基于Lite预测库的模型推理功能。\n", - "\n", - "## 1. 测试结论汇总\n", - "\n", - "目前Lite端的样本间支持以下四种方式的组合，共16个链条：\n", - "\n", - "| 模型类型 | 样本数量 | 功耗模式 | cpu多线程 |\n", - "| ---- | ---- | :----: | :----: |\n", - "| 正常模型 | 单样本/多样本 | LITE_POWER_HIGH/LITE_POWER_LOW | 支持 |\n", - "| 正常模型 | 单样本/多样本 | LITE_POWER_HIGH/LITE_POWER_LOW | 支持 |\n", - "| 量化模型 | 单样本/多样本 | LITE_POWER_HIGH/LITE_POWER_LOW | 支持 |\n", - "| 量化模型 | 单样本/多样本 | LITE_POWER_HIGH/LITE_POWER_LOW | 支持 |\n", - "\n", - "## 2. 测试流程\n", - "\n", - "### 2.1 功能测试\n", - "\n", - "先运行`prepare.sh`准备数据和模型，模型和数据会打包到test_lite.tar中，将test_lite.tar上传到手机上，然后运行`test_lite.sh`进行测试，最终在`test_lite/output`目录下生成`lite_*.log`后缀的日志文件。\n", - "\n", - "```shell\n", - "\n", - "# 数据和模型准备\n", - "bash PTDN/prepare.sh ./PTDN/configs/ppocr_det_mobile_params.txt \"lite_infer\"\n", - "\n", - "# 手机端测试:\n", - "bash PTND/test_lite.sh ./PTDN/configs/ppocr_det_mobile_params.txt\n", - "\n", - "``` \n", - "\n", - "**注意**：数据上传到手机的方式有两种，一种是通过adb的方式通过数据线连接，可以参考[Lite端部署文档](https://github.com/PaddlePaddle/PaddleOCR/blob/develop/deploy/lite/readme.md)。另外一种是通过在手机上开启虚拟终端在局域网内通过ssh的方式连接，无需数据线，第二种方式可以在手机上支持大部分linux命令，如vim、bash等，比较推荐，可以参考[安卓手机通过termux连接电脑](./termux_for_android.md)。\n", - "\n", - "#### 运行结果\n", - "\n", - "各测试的运行情况会打印在 `./output/` 中：\n", - "运行成功时会输出：\n", - "\n", - "```\n", - "Run successfully with command - ./ocr_db_crnn det ./models/ch_ppocr_mobile_v2.0_det_slim_opt.nb INT8 4 1 LITE_POWER_LOW ./test_data/icdar2015_lite/text_localization/ch4_test_images/img_233.jpg ./config.txt True > ./output/lite_ch_ppocr_mobile_v2.0_det_slim_opt.nb_precision_INT8_batchsize_1_threads_4_powermode_LITE_POWER_LOW_singleimg_True.log 2>&1!\n", - "Run successfully with command xxx\n", - "...\n", - "```\n", - "\n", - "运行失败时会输出：\n", - "\n", - "```\n", - "Run failed with command - ./ocr_db_crnn det ./models/ch_ppocr_mobile_v2.0_det_slim_opt.nb INT8 4 1 LITE_POWER_LOW ./test_data/icdar2015_lite/text_localization/ch4_test_images/img_233.jpg ./config.txt True > ./output/lite_ch_ppocr_mobile_v2.0_det_slim_opt.nb_precision_INT8_batchsize_1_threads_4_powermode_LITE_POWER_LOW_singleimg_True.log 2>&1!\n", - "Run failed with command xxx\n", - "...\n", - "```\n", - "\n", - "在./output/文件夹下，会存在如下日志，每一个日志都是不同配置下的log结果：\n", - "\n", - "\n", - "\n", - "在每一个log中，都会调用autolog打印如下信息：\n", - "\n", - "\n", - "\n", - "\n", - "\n", - "## 3. 更多教程\n", - "\n", - "本文档为功能测试用，更详细的Lite端预测使用教程请参考：[Lite端部署](https://github.com/PaddlePaddle/PaddleOCR/blob/develop/deploy/lite/readme.md) " - ] - }, - { - "cell_type": "markdown", - "id": "005fdd25", - "metadata": {}, - "source": [ - "# 安卓手机通过Termux连接电脑\n", - "\n", - "由于通过adb方式连接手机后，很多linux命令无法运行，自动化测试受阻，所以此处特此介绍另外一种通过Termux的连接方式，不仅可以运行大部分linux命令，方便开发者在手机上在线调试，甚至还可以多实现台机器同时连接手机。Termux不是真实的Linux环境，但是Termux可以安装真实的Linux，而且不会损失性能，与此同时，Termux不需要root。在配置Termux之前，请确保电脑已经安装adb工具，安装方式请参考[Lite端部署](https://github.com/PaddlePaddle/PaddleOCR/blob/develop/deploy/lite/readme.md) 。在运行以下命令后确保可以显示安卓设备信息。\n", - "\n", - "```\n", - "adb devices\n", - "```\n", - "连接成功信息提示：\n", - "```\n", - "List of devices attached\n", - "744be294 device\n", - "```\n", - "\n", - "## 1.安卓手机安装termux app\n", - "\n", - "### 1.1 下载termux apk文件\n", - "\n", - "由于目前该app目前各大商城暂无，所以可以直接下载如下apk文件。\n", - "\n", - "打开电脑终端，执行以下命令：\n", - "\n", - "```\n", - "wget http://10.12.121.133:8911/cuicheng01/fullchain/termux-v1.0.3.apk\n", - "```\n", - "\n", - "### 1.2 安装termux到手机上\n", - "\n", - "在手机端的开发者模式下，允许USB调试，允许USB安装。在电脑终端，执行如下命令，将termux app安装到手机上：\n", - "\n", - "```\n", - "adb install termux-v1.0.3.apk\n", - "```\n", - "\n", - "此处需要手机端确认安装，点击确认。\n", - "\n", - "### 1.3 验证是否安装成功\n", - "\n", - "打开手机，检验termux是否安装成功，如果没有，重新执行1.2，如果有相应的app，点击进入，会有如下显示。\n", - "\n", - "\n", - "\n", - "接下来的配置环境需要在手机上此终端运行相关命令。\n", - "\n", - "## 2.手机端配置termux\n", - "\n", - "首先将手机联网，最好可以连接外网，部分的配置需要外网。打开Termux终端，执行以下命令安装基础件`proot`，并使用`termux-chroot`命令可以模拟 root 环境与标准的 Linux 目录结构。\n", - "\n", - "```\n", - "pkg i -y proot\n", - "termux-chroot\n", - "```\n", - "\n", - "Termux 默认只能访问自身内部的数据，如果要访问手机中其它的数据，输入下面的命令后，手机弹出对请求权限的窗口，允许即可（方便对部分运行出的结果在手机端可视化）。\n", - "\n", - "```\n", - "termux-setup-storage\n", - "```\n", - "\n", - "### 2.1 配置SSH\n", - "\n", - "作为 Linux 终端或者服务器，必须有SSH。不管你是 SSH 连接到 Termux还是使用Termux去连其它主机，都需要先安装openssh。如果安装失败，请重复执行命令。\n", - "\n", - "```\n", - "pkg i -y openssh\n", - "```\n", - "\n", - "启动 SSH 服务端，默认端口号为8022\n", - "\n", - "```\n", - "sshd\n", - "```\n", - "\n", - "\n", - "### 2.2 电脑通过SSH方式连接手机\n", - "\n", - "1.保证手机和电脑处于同一局域网下\n", - "手机端分别输入以下命令获得ip地址和当前用户：\n", - "\n", - "```\n", - "# 获取ip地址\n", - "ifconfig\n", - "\n", - "# 获取当前用户\n", - "whoami\n", - "```\n", - "\n", - "如获取到的ip地址和当前用户分别是`172.24.162.117`和`u0_a374`。\n", - "\n", - "2.电脑端通过SSH连接手机\n", - "\n", - "```\n", - "#默认端口号为8022\n", - "ssh u0_a374@172.24.162.117 -p 8022\n", - "```\n", - "\n", - "3.运行ls命令后，会有如下显示：\n", - "\n", - "```\n", - "ls\n", - "```\n", - "\n", - "\n", - "\n", - "\n", - "### 2.3 通过scp传输数据\n", - "\n", - "1.在当前目录上新建test目录\n", - "\n", - "```\n", - "mkdir test\n", - "```\n", - "\n", - "2.测试scp功能\n", - "\n", - "将电脑中的某个文件拷贝到手机上：\n", - "```\n", - "scp -P 8022 test.txt u0_a374@172.24.162.117:/home/storage/test\n", - "```\n", - "\n", - "3.手机端查看\n", - "\n", - "打开手机终端，在`/home/storage/test`下查看是否存在`test.txt`\n", - "\n", - "\n", - "## 3. 更多教程\n", - "\n", - "本教程可以完成Termux基本配置，更多关于Termux的用法，请参考：[Termux高级终端安装使用配置教程](https://www.sqlsec.com/2018/05/termux.html)。\n", - "\n" - ] - }, - { - "cell_type": "code", - "execution_count": null, - "id": "9276a65a", - "metadata": {}, - "outputs": [], - "source": [] - } - ], - "metadata": { - "kernelspec": { - "display_name": "Python 3 (ipykernel)", - "language": "python", - "name": "python3" - }, - "language_info": { - "codemirror_mode": { - "name": "ipython", - "version": 3 - }, - "file_extension": ".py", - "mimetype": "text/x-python", - "name": "python", - "nbconvert_exporter": "python", - "pygments_lexer": "ipython3", - "version": "3.7.10" - } - }, - "nbformat": 4, - "nbformat_minor": 5 -}