fix conflict

deploy/paddle2onnx/readme.md

+# paddle2onnx 模型转化与预测
+
+本章节介绍 PaddleOCR 模型如何转化为 ONNX 模型，并基于 ONNX 引擎预测。
+
+## 1. 环境准备
+
+需要准备 Paddle2ONNX 模型转化环境，和 ONNX 模型预测环境
+
+###  Paddle2ONNX
+Paddle2ONNX 支持将 PaddlePaddle 模型格式转化到 ONNX 模型格式，算子目前稳定支持导出 ONNX Opset 9~11，部分Paddle算子支持更低的ONNX Opset转换。
+更多细节可参考 [Paddle2ONNX](https://github.com/PaddlePaddle/Paddle2ONNX/blob/develop/README_zh.md)
+
+- 安装 Paddle2ONNX
+```
+python3.7 -m pip install paddle2onnx
+```
+
+- 安装 ONNX
+```
+# 建议安装 1.4.0 版本，可根据环境更换版本号
+python3.7 -m pip install onnxruntime==1.4.0
+```
+
+## 2. 模型转换
+
+
+- Paddle 模型下载
+
+有两种方式获取Paddle静态图模型：在 [model_list](../../doc/doc_ch/models_list.md) 中下载PaddleOCR提供的预测模型；
+参考[模型导出说明](../../doc/doc_ch/inference.md#训练模型转inference模型)把训练好的权重转为 inference_model。
+
+以 ppocr 检测模型为例：
+
+```
+wget -nc  -P ./inference https://paddleocr.bj.bcebos.com/dygraph_v2.0/ch/ch_ppocr_mobile_v2.0_det_infer.tar
+cd ./inference && tar xf ch_ppocr_mobile_v2.0_det_infer.tar && cd ..
+```
+
+- 模型转换
+
+使用 Paddle2ONNX 将Paddle静态图模型转换为ONNX模型格式：
+
+```
+paddle2onnx --model_dir=./inference/ch_ppocr_mobile_v2.0_det_infer/ \
+--model_filename=inference.pdmodel \
+--params_filename=inference.pdiparams \
+--save_file=./inference/det_mobile_onnx/model.onnx \
+--opset_version=10 \
+--enable_onnx_checker=True
+```
+
+执行完毕后，ONNX 模型会被保存在 `./inference/det_mobile_onnx/` 路径下
+
+## 3. onnx 预测
+
+以检测模型为例，使用 ONNX 预测可执行如下命令：
+
+```
+python3.7 ../../tools/infer/predict_det.py --use_gpu=False --use_onnx=True \
+--det_model_dir=./inference/det_mobile_onnx/model.onnx \
+--image_dir=../../doc/imgs/1.jpg
+```
+
+执行命令后在终端会打印出预测的检测框坐标，并在 `./inference_results/` 下保存可视化结果。
+
+```
+root INFO: 1.jpg  [[[291, 295], [334, 292], [348, 844], [305, 847]], [[344, 296], [379, 294], [387, 669], [353, 671]]]
+The predict time of ../../doc/imgs/1.jpg: 0.06162881851196289
+The visualized image saved in ./inference_results/det_res_1.jpg
+```
+
+* 注意：ONNX暂时不支持变长预测，因为需要将输入resize到固定输入，预测结果可能与直接使用Paddle预测有细微不同。

doc/doc_ch/algorithm_overview.md

@@ -68,4 +68,5 @@ PaddleOCR基于动态图开源的文本识别算法列表：
 |NRTR|NRTR_MTB| 84.3% | rec_mtb_nrtr | [下载链接](https://paddleocr.bj.bcebos.com/dygraph_v2.0/en/rec_mtb_nrtr_train.tar) |
 |SAR|Resnet31| 87.2% | rec_r31_sar | [下载链接](https://paddleocr.bj.bcebos.com/dygraph_v2.1/rec/rec_r31_sar_train.tar) |
 |SEED| Aster_Resnet | 85.2% | rec_resnet_stn_bilstm_att | [下载链接](https://paddleocr.bj.bcebos.com/dygraph_v2.1/rec/rec_resnet_stn_bilstm_att.tar)|
+
 PaddleOCR文本识别算法的训练和使用请参考文档教程中[模型训练/评估中的文本识别部分](./recognition.md)。

test_tipc/configs/amp_ppocr_det_mobile_params.txt

+===========================train_params===========================
+model_name:ocr_det
+python:python3.7
+gpu_list:0|0,1
+Global.use_gpu:True|True
+Global.auto_cast:amp
+Global.epoch_num:lite_train_lite_infer=1|whole_train_whole_infer=300
+Global.save_model_dir:./output/
+Train.loader.batch_size_per_card:lite_train_lite_infer=2|whole_train_whole_infer=4
+Global.pretrained_model:null
+train_model_name:latest
+train_infer_img_dir:./train_data/icdar2015/text_localization/ch4_test_images/
+null:null
+##
+trainer:norm_train|pact_train|fpgm_train
+norm_train:tools/train.py -c test_tipc/configs/det_mv3_db.yml -o Global.pretrained_model=./pretrain_models/MobileNetV3_large_x0_5_pretrained
+pact_train:deploy/slim/quantization/quant.py -c test_tipc/configs/det_mv3_db.yml -o
+fpgm_train:deploy/slim/prune/sensitivity_anal.py -c test_tipc/configs/det_mv3_db.yml -o Global.pretrained_model=./pretrain_models/det_mv3_db_v2.0_train/best_accuracy
+distill_train:null
+null:null
+null:null
+##
+===========================eval_params=========================== 
+eval:null
+null:null
+##
+===========================infer_params===========================
+Global.save_inference_dir:./output/
+Global.pretrained_model:
+norm_export:tools/export_model.py -c test_tipc/configs/det_mv3_db.yml -o 
+quant_export:deploy/slim/quantization/export_model.py -c test_tipc/configs/det_mv3_db.yml -o 
+fpgm_export:deploy/slim/prune/export_prune_model.py -c test_tipc/configs/det_mv3_db.yml -o 
+distill_export:null
+export1:null
+export2:null
+inference_dir:null
+train_model:./inference/ch_ppocr_mobile_v2.0_det_train/best_accuracy
+infer_export:tools/export_model.py -c configs/det/ch_ppocr_v2.0/ch_det_mv3_db_v2.0.yml -o
+infer_quant:False
+inference:tools/infer/predict_det.py
+--use_gpu:True|False
+--enable_mkldnn:True|False
+--cpu_threads:1|6
+--rec_batch_num:1
+--use_tensorrt:False|True
+--precision:fp32|fp16|int8
+--det_model_dir:
+--image_dir:./inference/ch_det_data_50/all-sum-510/
+null:null
+--benchmark:True
+null:null
+===========================cpp_infer_params===========================
+use_opencv:True
+infer_model:./inference/ch_ppocr_mobile_v2.0_det_infer/
+infer_quant:False
+inference:./deploy/cpp_infer/build/ppocr det
+--use_gpu:True|False
+--enable_mkldnn:True|False
+--cpu_threads:1|6
+--rec_batch_num:1
+--use_tensorrt:False|True
+--precision:fp32|fp16
+--det_model_dir:
+--image_dir:./inference/ch_det_data_50/all-sum-510/
+null:null
+--benchmark:True
+===========================serving_params===========================
+model_name:ocr_det
+python:python3.7
+trans_model:-m paddle_serving_client.convert
+--dirname:./inference/ch_ppocr_mobile_v2.0_det_infer/
+--model_filename:inference.pdmodel
+--params_filename:inference.pdiparams
+--serving_server:./deploy/pdserving/ppocr_det_mobile_2.0_serving/
+--serving_client:./deploy/pdserving/ppocr_det_mobile_2.0_client/
+serving_dir:./deploy/pdserving
+web_service:web_service_det.py --config=config.yml --opt op.det.concurrency=1
+op.det.local_service_conf.devices:null|0
+op.det.local_service_conf.use_mkldnn:True|False
+op.det.local_service_conf.thread_num:1|6
+op.det.local_service_conf.use_trt:False|True
+op.det.local_service_conf.precision:fp32|fp16|int8
+pipline:pipeline_http_client.py --image_dir=../../doc/imgs
+===========================kl_quant_params===========================
+infer_model:./inference/ch_ppocr_mobile_v2.0_det_infer/
+infer_export:tools/export_model.py -c configs/det/ch_ppocr_v2.0/ch_det_mv3_db_v2.0.yml -o
+infer_quant:True
+inference:tools/infer/predict_det.py
+--use_gpu:True|False
+--enable_mkldnn:True|False
+--cpu_threads:1|6
+--rec_batch_num:1
+--use_tensorrt:False|True
+--precision:int8
+--det_model_dir:
+--image_dir:./inference/ch_det_data_50/all-sum-510/
+null:null
+--benchmark:True
+null:null
+null:null
+===========================lite_params===========================
+inference:./ocr_db_crnn det
+infer_model:./models/ch_ppocr_mobile_v2.0_det_opt.nb|./models/ch_ppocr_mobile_v2.0_det_slim_opt.nb
+--cpu_threads:1|4
+--batch_size:1
+--power_mode:LITE_POWER_HIGH|LITE_POWER_LOW
+--image_dir:./test_data/icdar2015_lite/text_localization/ch4_test_images/|./test_data/icdar2015_lite/text_localization/ch4_test_images/img_233.jpg
+--config_dir:./config.txt
+--rec_dict_dir:./ppocr_keys_v1.txt
+--benchmark:True

test_tipc/configs/fleet_ppocr_det_mobile_params.txt

+===========================train_params===========================
+model_name:ocr_det
+python:python3.7
+gpu_list:xx.xx.xx.xx,xx.xx.xx.xx;0,1
+Global.use_gpu:True|True
+Global.auto_cast:null|amp
+Global.epoch_num:lite_train_lite_infer=1|whole_train_whole_infer=300
+Global.save_model_dir:./output/
+Train.loader.batch_size_per_card:lite_train_lite_infer=2|whole_train_whole_infer=4
+Global.pretrained_model:null
+train_model_name:latest
+train_infer_img_dir:./train_data/icdar2015/text_localization/ch4_test_images/
+null:null
+##
+trainer:norm_train|pact_train|fpgm_train
+norm_train:tools/train.py -c test_tipc/configs/det_mv3_db.yml -o Global.pretrained_model=./pretrain_models/MobileNetV3_large_x0_5_pretrained
+pact_train:deploy/slim/quantization/quant.py -c test_tipc/configs/det_mv3_db.yml -o
+fpgm_train:deploy/slim/prune/sensitivity_anal.py -c test_tipc/configs/det_mv3_db.yml -o Global.pretrained_model=./pretrain_models/det_mv3_db_v2.0_train/best_accuracy
+distill_train:null
+null:null
+null:null
+##
+===========================eval_params=========================== 
+eval:null
+null:null
+##
+===========================infer_params===========================
+Global.save_inference_dir:./output/
+Global.pretrained_model:
+norm_export:tools/export_model.py -c test_tipc/configs/det_mv3_db.yml -o 
+quant_export:deploy/slim/quantization/export_model.py -c test_tipc/configs/det_mv3_db.yml -o 
+fpgm_export:deploy/slim/prune/export_prune_model.py -c test_tipc/configs/det_mv3_db.yml -o 
+distill_export:null
+export1:null
+export2:null
+inference_dir:null
+train_model:./inference/ch_ppocr_mobile_v2.0_det_train/best_accuracy
+infer_export:tools/export_model.py -c configs/det/ch_ppocr_v2.0/ch_det_mv3_db_v2.0.yml -o
+infer_quant:False
+inference:tools/infer/predict_det.py
+--use_gpu:True|False
+--enable_mkldnn:True|False
+--cpu_threads:1|6
+--rec_batch_num:1
+--use_tensorrt:False|True
+--precision:fp32|fp16|int8
+--det_model_dir:
+--image_dir:./inference/ch_det_data_50/all-sum-510/
+null:null
+--benchmark:True
+null:null
+===========================cpp_infer_params===========================
+use_opencv:True
+infer_model:./inference/ch_ppocr_mobile_v2.0_det_infer/
+infer_quant:False
+inference:./deploy/cpp_infer/build/ppocr det
+--use_gpu:True|False
+--enable_mkldnn:True|False
+--cpu_threads:1|6
+--rec_batch_num:1
+--use_tensorrt:False|True
+--precision:fp32|fp16
+--det_model_dir:
+--image_dir:./inference/ch_det_data_50/all-sum-510/
+null:null
+--benchmark:True
+===========================serving_params===========================
+model_name:ocr_det
+python:python3.7
+trans_model:-m paddle_serving_client.convert
+--dirname:./inference/ch_ppocr_mobile_v2.0_det_infer/
+--model_filename:inference.pdmodel
+--params_filename:inference.pdiparams
+--serving_server:./deploy/pdserving/ppocr_det_mobile_2.0_serving/
+--serving_client:./deploy/pdserving/ppocr_det_mobile_2.0_client/
+serving_dir:./deploy/pdserving
+web_service:web_service_det.py --config=config.yml --opt op.det.concurrency=1
+op.det.local_service_conf.devices:null|0
+op.det.local_service_conf.use_mkldnn:True|False
+op.det.local_service_conf.thread_num:1|6
+op.det.local_service_conf.use_trt:False|True
+op.det.local_service_conf.precision:fp32|fp16|int8
+pipline:pipeline_http_client.py --image_dir=../../doc/imgs
+===========================kl_quant_params===========================
+infer_model:./inference/ch_ppocr_mobile_v2.0_det_infer/
+infer_export:tools/export_model.py -c configs/det/ch_ppocr_v2.0/ch_det_mv3_db_v2.0.yml -o
+infer_quant:True
+inference:tools/infer/predict_det.py
+--use_gpu:True|False
+--enable_mkldnn:True|False
+--cpu_threads:1|6
+--rec_batch_num:1
+--use_tensorrt:False|True
+--precision:int8
+--det_model_dir:
+--image_dir:./inference/ch_det_data_50/all-sum-510/
+null:null
+--benchmark:True
+null:null
+null:null
+===========================lite_params===========================
+inference:./ocr_db_crnn det
+infer_model:./models/ch_ppocr_mobile_v2.0_det_opt.nb|./models/ch_ppocr_mobile_v2.0_det_slim_opt.nb
+--cpu_threads:1|4
+--batch_size:1
+--power_mode:LITE_POWER_HIGH|LITE_POWER_LOW
+--image_dir:./test_data/icdar2015_lite/text_localization/ch4_test_images/|./test_data/icdar2015_lite/text_localization/ch4_test_images/img_233.jpg
+--config_dir:./config.txt
+--rec_dict_dir:./ppocr_keys_v1.txt
+--benchmark:True

test_tipc/configs/ppocr_det_mobile_params.txt

 ===========================train_params===========================
 model_name:ocr_det
 python:python3.7
-gpu_list:0|0,1|10.21.226.181,10.21.226.133;0,1
-Global.use_gpu:True|True|True
-Global.auto_cast:fp32|amp
+gpu_list:0|0,1
+Global.use_gpu:True|True
+Global.auto_cast:null
 Global.epoch_num:lite_train_lite_infer=1|whole_train_whole_infer=300
 Global.save_model_dir:./output/
 Train.loader.batch_size_per_card:lite_train_lite_infer=2|whole_train_whole_infer=4
@@ -108,3 +108,15 @@ infer_model:./models/ch_ppocr_mobile_v2.0_det_opt.nb|./models/ch_ppocr_mobile_v2
 --config_dir:./config.txt
 --rec_dict_dir:./ppocr_keys_v1.txt
 --benchmark:True
+===========================paddle2onnx_params===========================
+2onnx: paddle2onnx 
+--model_dir:./inference/ch_ppocr_mobile_v2.0_det_infer/
+--model_filename:inference.pdmodel
+--params_filename:inference.pdiparams
+--save_file:./inference/det_mobile_onnx/model.onnx
+--opset_version:10 
+--enable_onnx_checker:True
+inference:tools/infer/predict_det.py
+--use_gpu:False
+--det_model_dir:
+--image_dir:./inference/ch_det_data_50/all-sum-510/
\ No newline at end of file

test_tipc/docs/test_inference_cpp.md

@@ -14,6 +14,8 @@ C++预测功能测试的主程序为`test_inference_cpp.sh`，可以测试基于
 | 量化模型 | CPU | 1/6 | - | int8 | 支持 |
 
 ## 2. 测试流程
+运行环境配置请参考[文档](./install.md)的内容配置TIPC的运行环境。
+
 ### 2.1 功能测试
 先运行`prepare.sh`准备数据和模型，然后运行`test_inference_cpp.sh`进行测试，最终在```test_tipc/output```目录下生成`cpp_infer_*.log`后缀的日志文件。
 
@@ -26,6 +28,32 @@ bash test_tipc/test_inference_cpp.sh ./test_tipc/configs/ppocr_det_mobile_params
 bash test_tipc/test_inference_cpp.sh ./test_tipc/configs/ppocr_det_mobile_params.txt '1'
 ```  
 
+运行预测指令后，在`test_tipc/output`文件夹下自动会保存运行日志，包括以下文件：
+
+```shell
+test_tipc/output/
+|- results_cpp.log    # 运行指令状态的日志
+|- cpp_infer_cpu_usemkldnn_False_threads_1_precision_fp32_batchsize_1.log  # CPU上不开启Mkldnn，线程数设置为1，测试batch_size=1条件下的预测运行日志
+|- cpp_infer_cpu_usemkldnn_False_threads_6_precision_fp32_batchsize_1.log  # CPU上不开启Mkldnn，线程数设置为6，测试batch_size=1条件下的预测运行日志
+|- cpp_infer_gpu_usetrt_False_precision_fp32_batchsize_1.log # GPU上不开启TensorRT，测试batch_size=1的fp32精度预测日志
+|- cpp_infer_gpu_usetrt_True_precision_fp16_batchsize_1.log  # GPU上开启TensorRT，测试batch_size=1的fp16精度预测日志
+......
+```
+其中results_cpp.log中包含了每条指令的运行状态，如果运行成功会输出：
+
+```
+Run successfully with command - ./deploy/cpp_infer/build/ppocr det --use_gpu=False --enable_mkldnn=False --cpu_threads=6 --det_model_dir=./inference/ch_ppocr_mobile_v2.0_det_infer/ --rec_batch_num=1 --image_dir=./inference/ch_det_data_50/all-sum-510/ --benchmar    k=True   > ./test_tipc/output/cpp_infer_cpu_usemkldnn_False_threads_6_precision_fp32_batchsize_1.log 2>&1 !
+Run successfully with command - ./deploy/cpp_infer/build/ppocr det --use_gpu=True --use_tensorrt=False --precision=fp32 --det_model_dir=./inference/ch_ppocr_mobile_v2.0_det_infer/ --rec_batch_num=1 --image_dir=./inference/ch_det_data_50/all-sum-510/ --benchmark    =True   > ./test_tipc/output/cpp_infer_gpu_usetrt_False_precision_fp32_batchsize_1.log 2>&1 !
+......
+```
+如果运行失败，会输出：
+```
+Run failed with command - ./deploy/cpp_infer/build/ppocr det --use_gpu=True --use_tensorrt=True --precision=fp32 --det_model_dir=./inference/ch_ppocr_mobile_v2.0_det_infer/ --rec_batch_num=1 --image_dir=./inference/ch_det_data_50/all-sum-510/ --benchmark=True       > ./test_tipc/output/cpp_infer_gpu_usetrt_True_precision_fp32_batchsize_1.log 2>&1 !
+Run failed with command - ./deploy/cpp_infer/build/ppocr det --use_gpu=True --use_tensorrt=True --precision=fp16 --det_model_dir=./inference/ch_ppocr_mobile_v2.0_det_infer/ --rec_batch_num=1 --image_dir=./inference/ch_det_data_50/all-sum-510/ --benchmark=True       > ./test_tipc/output/cpp_infer_gpu_usetrt_True_precision_fp16_batchsize_1.log 2>&1 !
+......
+```
+可以很方便的根据results_cpp.log中的内容判定哪一个指令运行错误。
+
 
 ### 2.2 精度测试
 

test_tipc/docs/test_lite.md

@@ -20,6 +20,7 @@ Lite预测功能测试的主程序为`test_lite.sh`，可以测试基于Lite预
 
 
 ## 2. 测试流程
+运行环境配置请参考[文档](./install.md)的内容配置TIPC的运行环境。
 
 ### 2.1 功能测试
 

test_tipc/docs/test_paddle2onnx.md

+# Paddle2onnx预测功能测试
+
+PaddleServing预测功能测试的主程序为`test_paddle2onnx.sh`，可以测试Paddle2ONNX的模型转化功能，并验证正确性。
+
+## 1. 测试结论汇总
+
+基于训练是否使用量化，进行本测试的模型可以分为`正常模型`和`量化模型`，这两类模型对应的Paddle2ONNX预测功能汇总如下：
+
+| 模型类型 |device |
+|  ----   |  ---- |  
+| 正常模型 | GPU |
+| 正常模型 | CPU |
+| 量化模型 | GPU |
+| 量化模型 | CPU |
+
+## 2. 测试流程
+### 2.1 功能测试
+先运行`prepare.sh`准备数据和模型，然后运行`test_paddle2onnx.sh`进行测试，最终在```test_tipc/output```目录下生成`paddle2onnx_infer_*.log`后缀的日志文件。
+
+```shell
+bash test_tipc/prepare.sh ./test_tipc/configs/ppocr_det_mobile_params.txt "paddle2onnx_infer"
+
+# 用法:
+bash test_tipc/test_paddle2onnx.sh ./test_tipc/configs/ppocr_det_mobile_params.txt
+```  
+
+#### 运行结果
+
+各测试的运行情况会打印在 `test_tipc/output/results_paddle2onnx.log` 中：
+运行成功时会输出：
+
+```
+Run successfully with command -  paddle2onnx  --model_dir=./inference/ch_ppocr_mobile_v2.0_det_infer/ --model_filename=inference.pdmodel --params_filename=inference.pdiparams --save_file=./inference/det_mobile_onnx/model.onnx --opset_version=10  --enable_onnx_checker=True!
+Run successfully with command - python test_tipc/onnx_inference/predict_det.py --use_gpu=False --image_dir=./inference/ch_det_data_50/all-sum-510/ --det_model_dir=./inference/det_mobile_onnx/model.onnx  2>&1 !
+```
+
+运行失败时会输出：
+
+```
+Run failed with command - paddle2onnx  --model_dir=./inference/ch_ppocr_mobile_v2.0_det_infer/ --model_filename=inference.pdmodel --params_filename=inference.pdiparams --save_file=./inference/det_mobile_onnx/model.onnx --opset_version=10  --enable_onnx_checker=True!
+...
+```
+
+
+## 3. 更多教程
+
+本文档为功能测试用，更详细的Paddle2onnx预测使用教程请参考：[Paddle2ONNX](https://github.com/PaddlePaddle/Paddle2ONNX)  

test_tipc/docs/test_serving.md

@@ -4,7 +4,7 @@ PaddleServing预测功能测试的主程序为`test_serving.sh`，可以测试
 
 ## 1. 测试结论汇总
 
-基于训练是否使用量化，进行本测试的模型可以分为`正常模型`和`量化模型`，这两类模型对应的C++预测功能汇总如下：
+基于训练是否使用量化，进行本测试的模型可以分为`正常模型`和`量化模型`，这两类模型对应的Serving预测功能汇总如下：
 
 | 模型类型 |device | batchsize | tensorrt | mkldnn | cpu多线程 |
 |  ----   |  ---- |   ----   |  :----:  |   :----:   |  :----:  |
@@ -14,6 +14,8 @@ PaddleServing预测功能测试的主程序为`test_serving.sh`，可以测试
 | 量化模型 | CPU | 1/6 | - | int8 | 支持 |
 
 ## 2. 测试流程
+运行环境配置请参考[文档](./install.md)的内容配置TIPC的运行环境。
+
 ### 2.1 功能测试
 先运行`prepare.sh`准备数据和模型，然后运行`test_serving.sh`进行测试，最终在```test_tipc/output```目录下生成`serving_infer_*.log`后缀的日志文件。
 

test_tipc/docs/test_train_inference_python.md

@@ -32,7 +32,7 @@ Linux端基础训练预测功能测试的主程序为`test_train_inference_pytho
 
 ## 2. 测试流程
 
-运行环境配置请参考[文档](./install.md)的内容配置tipc的运行环境。
+运行环境配置请参考[文档](./install.md)的内容配置TIPC的运行环境。
 
 ### 2.1 安装依赖
 - 安装PaddlePaddle >= 2.0

test_tipc/docs/win_test_train_inference_python.md

@@ -23,7 +23,7 @@ Windows端基础训练预测功能测试的主程序为`test_train_inference_pyt
 
 ## 2. 测试流程
 
-运行环境配置请参考[文档](./install.md)的内容配置tipc的运行环境。
+运行环境配置请参考[文档](./install.md)的内容配置TIPC的运行环境。
 
 另外，由于Windows上和linux的路径管理方式不同，可以在win上安装gitbash终端，在gitbash中执行指令的方式和在linux端执行指令方式相同，更方便tipc测试。gitbash[下载链接](https://git-scm.com/download/win)。
 

test_tipc/prepare.sh

@@ -202,3 +202,20 @@ if [ ${MODE} = "lite_infer" ];then
     tar -cf test_lite.tar ./test_lite && cp test_lite.tar ${current_dir} && cd ${current_dir}
 fi
 
+
+if [ ${MODE} = "paddle2onnx_infer" ];then
+    # prepare serving env
+    python_name=$(func_parser_value "${lines[2]}")
+    ${python_name} -m pip install install paddle2onnx
+    ${python_name} -m pip install onnxruntime==1.4.0
+    # wget model
+    wget -nc  -P ./inference https://paddleocr.bj.bcebos.com/dygraph_v2.0/ch/ch_ppocr_mobile_v2.0_det_infer.tar
+    wget -nc  -P ./inference https://paddleocr.bj.bcebos.com/dygraph_v2.0/ch/ch_ppocr_mobile_v2.0_rec_infer.tar
+    wget -nc  -P ./inference https://paddleocr.bj.bcebos.com/dygraph_v2.0/ch/ch_ppocr_server_v2.0_det_infer.tar
+    wget -nc  -P ./inference https://paddleocr.bj.bcebos.com/dygraph_v2.0/ch/ch_ppocr_server_v2.0_rec_infer.tar
+    # wget data
+    wget -nc -P ./inference https://paddleocr.bj.bcebos.com/dygraph_v2.0/test/ch_det_data_50.tar
+    wget -nc -P ./inference/ https://paddleocr.bj.bcebos.com/dygraph_v2.0/test/rec_inference.tar
+    cd ./inference && tar xf ch_ppocr_mobile_v2.0_det_infer.tar && tar xf ch_ppocr_mobile_v2.0_rec_infer.tar && tar xf ch_ppocr_server_v2.0_rec_infer.tar && tar xf ch_ppocr_server_v2.0_det_infer.tar && tar xf ch_det_data_50.tar && tar xf rec_inference.tar && cd ../
+    
+fi

test_tipc/test_paddle2onnx.sh

+#!/bin/bash
+source test_tipc/common_func.sh 
+
+FILENAME=$1
+
+dataline=$(cat ${FILENAME})
+lines=(${dataline})
+# common params
+model_name=$(func_parser_value "${lines[1]}")
+python=$(func_parser_value "${lines[2]}")
+
+
+# parser params
+dataline=$(awk 'NR==111, NR==123{print}'  $FILENAME)
+IFS=$'\n'
+lines=(${dataline})
+
+# parser paddle2onnx
+padlle2onnx_cmd=$(func_parser_value "${lines[1]}")
+infer_model_dir_key=$(func_parser_key "${lines[2]}")
+infer_model_dir_value=$(func_parser_value "${lines[2]}")
+model_filename_key=$(func_parser_key "${lines[3]}")
+model_filename_value=$(func_parser_value "${lines[3]}")
+params_filename_key=$(func_parser_key "${lines[4]}")
+params_filename_value=$(func_parser_value "${lines[4]}")
+save_file_key=$(func_parser_key "${lines[5]}")
+save_file_value=$(func_parser_value "${lines[5]}")
+opset_version_key=$(func_parser_key "${lines[6]}")
+opset_version_value=$(func_parser_value "${lines[6]}")
+enable_onnx_checker_key=$(func_parser_key "${lines[7]}")
+enable_onnx_checker_value=$(func_parser_value "${lines[7]}")
+# parser onnx inference 
+inference_py=$(func_parser_value "${lines[8]}")
+use_gpu_key=$(func_parser_key "${lines[9]}")
+use_gpu_value=$(func_parser_value "${lines[9]}")
+det_model_key=$(func_parser_key "${lines[10]}")
+image_dir_key=$(func_parser_key "${lines[11]}")
+image_dir_value=$(func_parser_value "${lines[11]}")
+
+
+LOG_PATH="./test_tipc/output"
+mkdir -p ./test_tipc/output
+status_log="${LOG_PATH}/results_paddle2onnx.log"
+
+
+function func_paddle2onnx(){
+    IFS='|'
+    _script=$1
+
+    # paddle2onnx
+    _save_log_path="${LOG_PATH}/paddle2onnx_infer_cpu.log"
+    set_dirname=$(func_set_params "${infer_model_dir_key}" "${infer_model_dir_value}")
+    set_model_filename=$(func_set_params "${model_filename_key}" "${model_filename_value}")
+    set_params_filename=$(func_set_params "${params_filename_key}" "${params_filename_value}")
+    set_save_model=$(func_set_params "${save_file_key}" "${save_file_value}")
+    set_opset_version=$(func_set_params "${opset_version_key}" "${opset_version_value}")
+    set_enable_onnx_checker=$(func_set_params "${enable_onnx_checker_key}" "${enable_onnx_checker_value}")
+    trans_model_cmd="${padlle2onnx_cmd} ${set_dirname} ${set_model_filename} ${set_params_filename} ${set_save_model} ${set_opset_version} ${set_enable_onnx_checker}"
+    eval $trans_model_cmd
+    last_status=${PIPESTATUS[0]}
+    status_check $last_status "${trans_model_cmd}" "${status_log}"
+    # python inference
+    set_gpu=$(func_set_params "${use_gpu_key}" "${use_gpu_value}")
+    set_model_dir=$(func_set_params "${det_model_key}" "${save_file_value}")
+    set_img_dir=$(func_set_params "${image_dir_key}" "${image_dir_value}")
+    infer_model_cmd="${python} ${inference_py} ${set_gpu} ${set_img_dir} ${set_model_dir} --use_onnx=True > ${_save_log_path} 2>&1 "
+    eval $infer_model_cmd
+    status_check $last_status "${infer_model_cmd}" "${status_log}"
+}
+
+
+echo "################### run test ###################"
+
+export Count=0
+IFS="|"
+func_paddle2onnx 
\ No newline at end of file

test_tipc/test_train_inference_python.sh

@@ -316,7 +316,7 @@ else
                 elif [ ${#ips} -le 26 ];then  # train with multi-gpu
                     cmd="${python} -m paddle.distributed.launch --gpus=${gpu} ${run_train} ${set_use_gpu} ${set_save_model} ${set_epoch} ${set_pretrain} ${set_autocast} ${set_batchsize} ${set_train_params1} ${set_amp_config}"
                 else     # train with multi-machine
-                    cmd="${python} -m paddle.distributed.launch --ips=${ips} --gpus=${gpu} ${set_use_gpu} ${run_train} ${set_save_model} ${set_pretrain} ${set_epoch} ${set_autocast} ${set_batchsize} ${set_train_params1} ${set_amp_config}"
+                    cmd="${python} -m paddle.distributed.launch --ips=${ips} --gpus=${gpu} ${run_train} ${set_use_gpu} ${set_save_model} ${set_pretrain} ${set_epoch} ${set_autocast} ${set_batchsize} ${set_train_params1} ${set_amp_config}"
                 fi
                 # run train
                 eval "unset CUDA_VISIBLE_DEVICES"

tools/infer/predict_cls.py

@@ -47,6 +47,7 @@ class TextClassifier(object):
         self.postprocess_op = build_post_process(postprocess_params)
         self.predictor, self.input_tensor, self.output_tensors, _ = \
             utility.create_predictor(args, 'cls', logger)
+        self.use_onnx = args.use_onnx
 
     def resize_norm_img(self, img):
         imgC, imgH, imgW = self.cls_image_shape
@@ -100,6 +101,12 @@ class TextClassifier(object):
             norm_img_batch = np.concatenate(norm_img_batch)
             norm_img_batch = norm_img_batch.copy()
 
+            if self.use_onnx:
+                input_dict = {}
+                input_dict[self.input_tensor.name] = norm_img_batch
+                outputs = self.predictor.run(self.output_tensors, input_dict)
+                prob_out = outputs[0]
+            else:
                 self.input_tensor.copy_from_cpu(norm_img_batch)
                 self.predictor.run()
                 prob_out = self.output_tensors[0].copy_to_cpu()

tools/infer/predict_det.py

@@ -38,6 +38,7 @@ class TextDetector(object):
     def __init__(self, args):
         self.args = args
         self.det_algorithm = args.det_algorithm
+        self.use_onnx = args.use_onnx
         pre_process_list = [{
             'DetResizeForTest': {
                 'limit_side_len': args.det_limit_side_len,
@@ -100,7 +101,12 @@ class TextDetector(object):
         else:
             logger.info("unknown det_algorithm:{}".format(self.det_algorithm))
             sys.exit(0)
-
+        if self.use_onnx:
+            pre_process_list[0] = {
+                'DetResizeForTest': {
+                    'image_shape': [640, 640]
+                }
+            }
         self.preprocess_op = create_operators(pre_process_list)
         self.postprocess_op = build_post_process(postprocess_params)
         self.predictor, self.input_tensor, self.output_tensors, self.config = utility.create_predictor(
@@ -198,7 +204,11 @@ class TextDetector(object):
 
         if self.args.benchmark:
             self.autolog.times.stamp()
-
+        if self.use_onnx:
+            input_dict = {}
+            input_dict[self.input_tensor.name] = img
+            outputs = self.predictor.run(self.output_tensors, input_dict)
+        else:
             self.input_tensor.copy_from_cpu(img)
             self.predictor.run()
             outputs = []

tools/infer/predict_rec.py

@@ -73,6 +73,7 @@ class TextRecognizer(object):
         self.predictor, self.input_tensor, self.output_tensors, self.config = \
             utility.create_predictor(args, 'rec', logger)
         self.benchmark = args.benchmark
+        self.use_onnx = args.use_onnx
         if args.benchmark:
             import auto_log
             pid = os.getpid()
@@ -107,6 +108,8 @@ class TextRecognizer(object):
 
         assert imgC == img.shape[2]
         imgW = int((32 * max_wh_ratio))
+        if self.use_onnx:
+            imgW = 100
         h, w = img.shape[:2]
         ratio = w / float(h)
         if math.ceil(imgH * ratio) > imgW:
@@ -296,10 +299,17 @@ class TextRecognizer(object):
                     gsrm_slf_attn_bias1_list,
                     gsrm_slf_attn_bias2_list,
                 ]
+                if self.use_onnx:
+                    input_dict = {}
+                    input_dict[self.input_tensor.name] = norm_img_batch
+                    outputs = self.predictor.run(self.output_tensors,
+                                                 input_dict)
+                    preds = {"predict": outputs[2]}
+                else:
                     input_names = self.predictor.get_input_names()
                     for i in range(len(input_names)):
-                    input_tensor = self.predictor.get_input_handle(input_names[
-                        i])
+                        input_tensor = self.predictor.get_input_handle(
+                            input_names[i])
                         input_tensor.copy_from_cpu(inputs[i])
                     self.predictor.run()
                     outputs = []
@@ -315,10 +325,17 @@ class TextRecognizer(object):
                     norm_img_batch,
                     valid_ratios,
                 ]
+                if self.use_onnx:
+                    input_dict = {}
+                    input_dict[self.input_tensor.name] = norm_img_batch
+                    outputs = self.predictor.run(self.output_tensors,
+                                                 input_dict)
+                    preds = outputs[0]
+                else:
                     input_names = self.predictor.get_input_names()
                     for i in range(len(input_names)):
-                    input_tensor = self.predictor.get_input_handle(input_names[
-                        i])
+                        input_tensor = self.predictor.get_input_handle(
+                            input_names[i])
                         input_tensor.copy_from_cpu(inputs[i])
                     self.predictor.run()
                     outputs = []
@@ -328,6 +345,13 @@ class TextRecognizer(object):
                     if self.benchmark:
                         self.autolog.times.stamp()
                     preds = outputs[0]
+            else:
+                if self.use_onnx:
+                    input_dict = {}
+                    input_dict[self.input_tensor.name] = norm_img_batch
+                    outputs = self.predictor.run(self.output_tensors,
+                                                 input_dict)
+                    preds = outputs[0]
                 else:
                     self.input_tensor.copy_from_cpu(norm_img_batch)
                     self.predictor.run()

tools/infer/utility.py

@@ -121,6 +121,7 @@ def init_args():
     parser.add_argument("--save_log_path", type=str, default="./log_output/")
 
     parser.add_argument("--show_log", type=str2bool, default=True)
+    parser.add_argument("--use_onnx", type=str2bool, default=False)
     return parser
 
 
@@ -144,10 +145,21 @@ def create_predictor(args, mode, logger):
     if model_dir is None:
         logger.info("not find {} model file path {}".format(mode, model_dir))
         sys.exit(0)
+    if args.use_onnx:
+        import onnxruntime as ort
+        model_file_path = model_dir
+        if not os.path.exists(model_file_path):
+            raise ValueError("not find model file path {}".format(
+                model_file_path))
+        sess = ort.InferenceSession(model_file_path)
+        return sess, sess.get_inputs()[0], None, None
+
+    else:
         model_file_path = model_dir + "/inference.pdmodel"
         params_file_path = model_dir + "/inference.pdiparams"
         if not os.path.exists(model_file_path):
-        raise ValueError("not find model file path {}".format(model_file_path))
+            raise ValueError("not find model file path {}".format(
+                model_file_path))
         if not os.path.exists(params_file_path):
             raise ValueError("not find params file path {}".format(
                 params_file_path))