# Configuration and Command History If `$XDG_CONFIG_HOME` is set, then configuration and command history files are located in `$XDG_CONFIG_HOME/dlv`. Otherwise, they are located in `$HOME/.config/dlv` on Linux and `$HOME/.dlv` on other systems. The configuration file `config.yml` contains all the configurable options and their default values. The command history is stored in `.dbg_history`. # Commands ## Running the program Command | Description --------|------------ [call](#call) | Resumes process, injecting a function call (EXPERIMENTAL!!!) [continue](#continue) | Run until breakpoint or program termination. [next](#next) | Step over to next source line. [rebuild](#rebuild) | Rebuild the target executable and restarts it. It does not work if the executable was not built by delve. [restart](#restart) | Restart process. [rev](#rev) | Reverses the execution of the target program for the command specified. [rewind](#rewind) | Run backwards until breakpoint or program termination. [step](#step) | Single step through program. [step-instruction](#step-instruction) | Single step a single cpu instruction. [stepout](#stepout) | Step out of the current function. ## Manipulating breakpoints Command | Description --------|------------ [break](#break) | Sets a breakpoint. [breakpoints](#breakpoints) | Print out info for active breakpoints. [clear](#clear) | Deletes breakpoint. [clearall](#clearall) | Deletes multiple breakpoints. [condition](#condition) | Set breakpoint condition. [on](#on) | Executes a command when a breakpoint is hit. [toggle](#toggle) | Toggles on or off a breakpoint. [trace](#trace) | Set tracepoint. [watch](#watch) | Set watchpoint. ## Viewing program variables and memory Command | Description --------|------------ [args](#args) | Print function arguments. [display](#display) | Print value of an expression every time the program stops. [examinemem](#examinemem) | Examine raw memory at the given address. [locals](#locals) | Print local variables. [print](#print) | Evaluate an expression. [regs](#regs) | Print contents of CPU registers. [set](#set) | Changes the value of a variable. [vars](#vars) | Print package variables. [whatis](#whatis) | Prints type of an expression. ## Listing and switching between threads and goroutines Command | Description --------|------------ [goroutine](#goroutine) | Shows or changes current goroutine [goroutines](#goroutines) | List program goroutines. [thread](#thread) | Switch to the specified thread. [threads](#threads) | Print out info for every traced thread. ## Viewing the call stack and selecting frames Command | Description --------|------------ [deferred](#deferred) | Executes command in the context of a deferred call. [down](#down) | Move the current frame down. [frame](#frame) | Set the current frame, or execute command on a different frame. [stack](#stack) | Print stack trace. [up](#up) | Move the current frame up. ## Other commands Command | Description --------|------------ [check](#check) | Creates a checkpoint at the current position. [checkpoints](#checkpoints) | Print out info for existing checkpoints. [clear-checkpoint](#clear-checkpoint) | Deletes checkpoint. [config](#config) | Changes configuration parameters. [disassemble](#disassemble) | Disassembler. [dump](#dump) | Creates a core dump from the current process state [edit](#edit) | Open where you are in $DELVE_EDITOR or $EDITOR [exit](#exit) | Exit the debugger. [funcs](#funcs) | Print list of functions. [help](#help) | Prints the help message. [libraries](#libraries) | List loaded dynamic libraries [list](#list) | Show source code. [source](#source) | Executes a file containing a list of delve commands [sources](#sources) | Print list of source files. [types](#types) | Print list of types ## args Print function arguments. [goroutine ] [frame ] args [-v] [] If regex is specified only function arguments with a name matching it will be returned. If -v is specified more information about each function argument will be shown. ## break Sets a breakpoint. break [name] See [Documentation/cli/locspec.md](//github.com/go-delve/delve/tree/master/Documentation/cli/locspec.md) for the syntax of linespec. See also: "help on", "help cond" and "help clear" Aliases: b ## breakpoints Print out info for active breakpoints. breakpoints [-a] Specifying -a prints all physical breakpoint, including internal breakpoints. Aliases: bp ## call Resumes process, injecting a function call (EXPERIMENTAL!!!) call [-unsafe] Current limitations: - only pointers to stack-allocated objects can be passed as argument. - only some automatic type conversions are supported. - functions can only be called on running goroutines that are not executing the runtime. - the current goroutine needs to have at least 256 bytes of free space on the stack. - functions can only be called when the goroutine is stopped at a safe point. - calling a function will resume execution of all goroutines. - only supported on linux's native backend. ## check Creates a checkpoint at the current position. checkpoint [note] The "note" is arbitrary text that can be used to identify the checkpoint, if it is not specified it defaults to the current filename:line position. Aliases: checkpoint ## checkpoints Print out info for existing checkpoints. ## clear Deletes breakpoint. clear ## clear-checkpoint Deletes checkpoint. clear-checkpoint Aliases: clearcheck ## clearall Deletes multiple breakpoints. clearall [] If called with the linespec argument it will delete all the breakpoints matching the linespec. If linespec is omitted all breakpoints are deleted. ## condition Set breakpoint condition. condition . condition -hitcount Specifies that the breakpoint, tracepoint or watchpoint should break only if the boolean expression is true. With the -hitcount option a condition on the breakpoint hit count can be set, the following operators are supported condition -hitcount bp > n condition -hitcount bp >= n condition -hitcount bp < n condition -hitcount bp <= n condition -hitcount bp == n condition -hitcount bp != n condition -hitcount bp % n The '% n' form means we should stop at the breakpoint when the hitcount is a multiple of n. Aliases: cond ## config Changes configuration parameters. config -list Show all configuration parameters. config -save Saves the configuration file to disk, overwriting the current configuration file. config Changes the value of a configuration parameter. config substitute-path config substitute-path Adds or removes a path substitution rule. config alias config alias Defines as an alias to or removes an alias. ## continue Run until breakpoint or program termination. continue [] Optional linespec argument allows you to continue until a specific location is reached. The program will halt if a breakpoint is hit before reaching the specified location. For example: continue main.main continue encoding/json.Marshal Aliases: c ## deferred Executes command in the context of a deferred call. deferred Executes the specified command (print, args, locals) in the context of the n-th deferred call in the current frame. ## disassemble Disassembler. [goroutine ] [frame ] disassemble [-a ] [-l ] If no argument is specified the function being executed in the selected stack frame will be executed. -a disassembles the specified address range -l disassembles the specified function Aliases: disass ## display Print value of an expression every time the program stops. display -a [%format] display -d The '-a' option adds an expression to the list of expression printed every time the program stops. The '-d' option removes the specified expression from the list. If display is called without arguments it will print the value of all expression in the list. ## down Move the current frame down. down [] down [] Move the current frame down by . The second form runs the command on the given frame. ## dump Creates a core dump from the current process state dump The core dump is always written in ELF, even on systems (windows, macOS) where this is not customary. For environments other than linux/amd64 threads and registers are dumped in a format that only Delve can read back. ## edit Open where you are in $DELVE_EDITOR or $EDITOR edit [locspec] If locspec is omitted edit will open the current source file in the editor, otherwise it will open the specified location. Aliases: ed ## examinemem Examine raw memory at the given address. Examine memory: examinemem [-fmt ] [-count|-len ] [-size ]
examinemem [-fmt ] [-count|-len ] [-size ] -x Format represents the data format and the value is one of this list (default hex): bin(binary), oct(octal), dec(decimal), hex(hexadecimal), addr(address). Length is the number of bytes (default 1) and must be less than or equal to 1000. Address is the memory location of the target to examine. Please note '-len' is deprecated by '-count and -size'. Expression can be an integer expression or pointer value of the memory location to examine. For example: x -fmt hex -count 20 -size 1 0xc00008af38 x -fmt hex -count 20 -size 1 -x 0xc00008af38 + 8 x -fmt hex -count 20 -size 1 -x &myVar x -fmt hex -count 20 -size 1 -x myPtrVar Aliases: x ## exit Exit the debugger. exit [-c] When connected to a headless instance started with the --accept-multiclient, pass -c to resume the execution of the target process before disconnecting. Aliases: quit q ## frame Set the current frame, or execute command on a different frame. frame frame The first form sets frame used by subsequent commands such as "print" or "set". The second form runs the command on the given frame. ## funcs Print list of functions. funcs [] If regex is specified only the functions matching it will be returned. ## goroutine Shows or changes current goroutine goroutine goroutine goroutine Called without arguments it will show information about the current goroutine. Called with a single argument it will switch to the specified goroutine. Called with more arguments it will execute a command on the specified goroutine. Aliases: gr ## goroutines List program goroutines. goroutines [-u|-r|-g|-s] [-t [depth]] [-l] [-with loc expr] [-without loc expr] [-group argument] Print out info for every goroutine. The flag controls what information is shown along with each goroutine: -u displays location of topmost stackframe in user code (default) -r displays location of topmost stackframe (including frames inside private runtime functions) -g displays location of go instruction that created the goroutine -s displays location of the start function -t displays goroutine's stacktrace (an optional depth value can be specified, default: 10) -l displays goroutine's labels If no flag is specified the default is -u, i.e. the first frame within the first 30 frames that is not executing a runtime private function. FILTERING If -with or -without are specified only goroutines that match the given condition are returned. To only display goroutines where the specified location contains (or does not contain, for -without and -wo) expr as a substring, use: goroutines -with (userloc|curloc|goloc|startloc) expr goroutines -w (userloc|curloc|goloc|startloc) expr goroutines -without (userloc|curloc|goloc|startloc) expr goroutines -wo (userloc|curloc|goloc|startloc) expr To only display goroutines that have (or do not have) the specified label key and value, use: goroutines -with label key=value goroutines -without label key=value To only display goroutines that have (or do not have) the specified label key, use: goroutines -with label key goroutines -without label key To only display goroutines that are running (or are not running) on a OS thread, use: goroutines -with running goroutines -without running To only display user (or runtime) goroutines, use: goroutines -with user goroutines -without user GROUPING goroutines -group (userloc|curloc|goloc|startloc|running|user) Groups goroutines by the given location, running status or user classification, up to 5 goroutines per group will be displayed as well as the total number of goroutines in the group. goroutines -group label key Groups goroutines by the value of the label with the specified key. Aliases: grs ## help Prints the help message. help [command] Type "help" followed by the name of a command for more information about it. Aliases: h ## libraries List loaded dynamic libraries ## list Show source code. [goroutine ] [frame ] list [] Show source around current point or provided linespec. For example: frame 1 list 69 list testvariables.go:10000 list main.main:30 list 40 Aliases: ls l ## locals Print local variables. [goroutine ] [frame ] locals [-v] [] The name of variables that are shadowed in the current scope will be shown in parenthesis. If regex is specified only local variables with a name matching it will be returned. If -v is specified more information about each local variable will be shown. ## next Step over to next source line. next [count] Optional [count] argument allows you to skip multiple lines. Aliases: n ## on Executes a command when a breakpoint is hit. on on -edit Supported commands: print, stack, goroutine, trace and cond. To convert a breakpoint into a tracepoint use: on trace The command 'on cond ' is equivalent to 'cond '. The command 'on x -edit' can be used to edit the list of commands executed when the breakpoint is hit. ## print Evaluate an expression. [goroutine ] [frame ] print [%format] See [Documentation/cli/expr.md](//github.com/go-delve/delve/tree/master/Documentation/cli/expr.md) for a description of supported expressions. The optional format argument is a format specifier, like the ones used by the fmt package. For example "print %x v" will print v as an hexadecimal number. Aliases: p ## rebuild Rebuild the target executable and restarts it. It does not work if the executable was not built by delve. ## regs Print contents of CPU registers. regs [-a] Argument -a shows more registers. Individual registers can also be displayed by 'print' and 'display'. See [Documentation/cli/expr.md.](//github.com/go-delve/delve/tree/master/Documentation/cli/expr.md.) ## restart Restart process. For recorded targets the command takes the following forms: restart resets to the start of the recording restart [checkpoint] resets the recording to the given checkpoint restart -r [newargv...] [redirects...] re-records the target process For live targets the command takes the following forms: restart [newargv...] [redirects...] restarts the process If newargv is omitted the process is restarted (or re-recorded) with the same argument vector. If -noargs is specified instead, the argument vector is cleared. A list of file redirections can be specified after the new argument list to override the redirections defined using the '--redirect' command line option. A syntax similar to Unix shells is used: output.txt redirects the standard output of the target process to output.txt 2>error.txt redirects the standard error of the target process to error.txt Aliases: r ## rev Reverses the execution of the target program for the command specified. Currently, only the rev step-instruction command is supported. ## rewind Run backwards until breakpoint or program termination. Aliases: rw ## set Changes the value of a variable. [goroutine ] [frame ] set = See [Documentation/cli/expr.md](//github.com/go-delve/delve/tree/master/Documentation/cli/expr.md) for a description of supported expressions. Only numerical variables and pointers can be changed. ## source Executes a file containing a list of delve commands source If path ends with the .star extension it will be interpreted as a starlark script. See [Documentation/cli/starlark.md](//github.com/go-delve/delve/tree/master/Documentation/cli/starlark.md) for the syntax. If path is a single '-' character an interactive starlark interpreter will start instead. Type 'exit' to exit. ## sources Print list of source files. sources [] If regex is specified only the source files matching it will be returned. ## stack Print stack trace. [goroutine ] [frame ] stack [] [-full] [-offsets] [-defer] [-a ] [-adepth ] [-mode ] -full every stackframe is decorated with the value of its local variables and arguments. -offsets prints frame offset of each frame. -defer prints deferred function call stack for each frame. -a prints stacktrace of n ancestors of the selected goroutine (target process must have tracebackancestors enabled) -adepth configures depth of ancestor stacktrace -mode specifies the stacktrace mode, possible values are: normal - attempts to automatically switch between cgo frames and go frames simple - disables automatic switch between cgo and go fromg - starts from the registers stored in the runtime.g struct Aliases: bt ## step Single step through program. Aliases: s ## step-instruction Single step a single cpu instruction. Aliases: si ## stepout Step out of the current function. Aliases: so ## thread Switch to the specified thread. thread Aliases: tr ## threads Print out info for every traced thread. ## toggle Toggles on or off a breakpoint. toggle ## trace Set tracepoint. trace [name] A tracepoint is a breakpoint that does not stop the execution of the program, instead when the tracepoint is hit a notification is displayed. See [Documentation/cli/locspec.md](//github.com/go-delve/delve/tree/master/Documentation/cli/locspec.md) for the syntax of linespec. See also: "help on", "help cond" and "help clear" Aliases: t ## types Print list of types types [] If regex is specified only the types matching it will be returned. ## up Move the current frame up. up [] up [] Move the current frame up by . The second form runs the command on the given frame. ## vars Print package variables. vars [-v] [] If regex is specified only package variables with a name matching it will be returned. If -v is specified more information about each package variable will be shown. ## watch Set watchpoint. watch [-r|-w|-rw] -r stops when the memory location is read -w stops when the memory location is written -rw stops when the memory location is read or written The memory location is specified with the same expression language used by 'print', for example: watch v will watch the address of variable 'v'. See also: "help print". ## whatis Prints type of an expression. whatis