/** ****************************************************************************** * @file stm32u5xx_hal_rtc_ex.c * @author MCD Application Team * @brief Extended RTC HAL module driver. * This file provides firmware functions to manage the following * functionalities of the Real Time Clock (RTC) Extended peripheral: * + RTC Time Stamp functions * + RTC Tamper functions * + RTC Wake-up functions * + Extended Control functions * + Extended RTC features functions * ****************************************************************************** * @attention * * Copyright (c) 2021 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** @verbatim ============================================================================== ##### How to use this driver ##### ============================================================================== [..] (+) Enable the RTC domain access. (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour format using the HAL_RTC_Init() function. *** RTC Wakeup configuration *** ================================ [..] (+) To configure the RTC Wakeup Clock source and Counter use the HAL_RTCEx_SetWakeUpTimer() function. You can also configure the RTC Wakeup timer with interrupt mode using the HAL_RTCEx_SetWakeUpTimer_IT() function. (+) To read the RTC WakeUp Counter register, use the HAL_RTCEx_GetWakeUpTimer() function. *** Outputs configuration *** ============================= [..] The RTC has 2 different outputs: (+) RTC_ALARM: this output is used to manage the RTC Alarm A, Alarm B and WaKeUp signals. To output the selected RTC signal, use the HAL_RTC_Init() function. (+) RTC_CALIB: this output is 512Hz signal or 1Hz. To enable the RTC_CALIB, use the HAL_RTCEx_SetCalibrationOutPut() function. (+) Two pins can be used as RTC_ALARM or RTC_CALIB (PC13, PB2) managed on the RTC_OR register. (+) When the RTC_CALIB or RTC_ALARM output is selected, the RTC_OUT pin is automatically configured in output alternate function. *** Smooth digital Calibration configuration *** ================================================ [..] (+) Configure the RTC Original Digital Calibration Value and the corresponding calibration cycle period (32s,16s and 8s) using the HAL_RTCEx_SetSmoothCalib() function. *** TimeStamp configuration *** =============================== [..] (+) Enable the RTC TimeStamp using the HAL_RTCEx_SetTimeStamp() function. You can also configure the RTC TimeStamp with interrupt mode using the HAL_RTCEx_SetTimeStamp_IT() function. (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp() function. *** Internal TimeStamp configuration *** =============================== [..] (+) Enable the RTC internal TimeStamp using the HAL_RTCEx_SetInternalTimeStamp() function. User has to check internal timestamp occurrence using __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG. (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp() function. *** Tamper configuration *** ============================ [..] (+) Enable the RTC Tamper and configure the Tamper filter count, trigger Edge or Level according to the Tamper filter (if equal to 0 Edge else Level) value, sampling frequency, NoErase, MaskFlag, precharge or discharge and Pull-UP using the HAL_RTCEx_SetTamper() function. You can configure RTC Tamper with interrupt mode using HAL_RTCEx_SetTamper_IT() function. (+) The default configuration of the Tamper erases the backup registers. To avoid erase, enable the NoErase field on the RTC_TAMPCR register. (+) With new RTC tamper configuration, you have to call HAL_RTC_Init() in order to perform TAMP base address offset calculation. (+) If you do not intend to have tamper using RTC clock, you can bypass its initialization by setting ClockEnable inti field to RTC_CLOCK_DISABLE. (+) Enable Internal tamper using HAL_RTCEx_SetInternalTamper. IT mode can be chosen using setting Interrupt field. *** Backup Data Registers configuration *** =========================================== [..] (+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite() function. (+) To read the RTC Backup Data registers, use the HAL_RTCEx_BKUPRead() function. (+) Before calling these functions you have to call HAL_RTC_Init() in order to perform TAMP base address offset calculation. @endverbatim ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32u5xx_hal.h" /** @addtogroup STM32U5xx_HAL_Driver * @{ */ /** @addtogroup RTCEx * @brief RTC Extended HAL module driver * @{ */ #ifdef HAL_RTC_MODULE_ENABLED /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ #define TAMP_ALL (TAMP_CR1_TAMP1E | TAMP_CR1_TAMP2E | TAMP_CR1_TAMP3E | TAMP_CR1_TAMP4E | \ TAMP_CR1_TAMP5E | TAMP_CR1_TAMP6E | TAMP_CR1_TAMP7E | TAMP_CR1_TAMP8E) /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /* Exported functions --------------------------------------------------------*/ /** @addtogroup RTCEx_Exported_Functions * @{ */ /** @addtogroup RTCEx_Exported_Functions_Group1 * @brief RTC TimeStamp and Tamper functions * @verbatim =============================================================================== ##### RTC TimeStamp and Tamper functions ##### =============================================================================== [..] This section provides functions allowing to configure TimeStamp feature @endverbatim * @{ */ /** * @brief Set TimeStamp. * @note This API must be called before enabling the TimeStamp feature. * @param hrtc RTC handle * @param TimeStampEdge Specifies the pin edge on which the TimeStamp is * activated. * This parameter can be one of the following values: * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the * rising edge of the related pin. * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the * falling edge of the related pin. * @param RTC_TimeStampPin specifies the RTC TimeStamp Pin. * This parameter can be one of the following values: * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin. * The RTC TimeStamp Pin is per default PC13, but for reasons of * compatibility, this parameter is required. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin) { /* Check the parameters */ assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge)); assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); UNUSED(RTC_TimeStampPin); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Get the RTC_CR register and clear the bits to be configured */ CLEAR_BIT(RTC->CR, (RTC_CR_TSEDGE | RTC_CR_TSE)); /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Configure the Time Stamp TSEDGE and Enable bits */ SET_BIT(RTC->CR, (uint32_t)TimeStampEdge | RTC_CR_TSE); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Set TimeStamp with Interrupt. * @note This API must be called before enabling the TimeStamp feature. * @param hrtc RTC handle * @param TimeStampEdge Specifies the pin edge on which the TimeStamp is * activated. * This parameter can be one of the following values: * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the * rising edge of the related pin. * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the * falling edge of the related pin. * @param RTC_TimeStampPin Specifies the RTC TimeStamp Pin. * This parameter can be one of the following values: * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin. * The RTC TimeStamp Pin is per default PC13, but for reasons of * compatibility, this parameter is required. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin) { /* Check the parameters */ assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge)); assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin)); UNUSED(RTC_TimeStampPin); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Get the RTC_CR register and clear the bits to be configured */ CLEAR_BIT(RTC->CR, (RTC_CR_TSEDGE | RTC_CR_TSE)); /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Configure the Time Stamp TSEDGE before Enable bit to avoid unwanted TSF setting. */ SET_BIT(RTC->CR, (uint32_t)TimeStampEdge); /* Enable timestamp and IT */ SET_BIT(RTC->CR, RTC_CR_TSE | RTC_CR_TSIE); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Deactivate TimeStamp. * @param hrtc RTC handle * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc) { /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* In case of interrupt mode is used, the interrupt source must disabled */ CLEAR_BIT(RTC->CR, (RTC_CR_TSEDGE | RTC_CR_TSE | RTC_CR_TSIE)); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Set Internal TimeStamp. * @note This API must be called before enabling the internal TimeStamp feature. * @param hrtc RTC handle * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc) { /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Configure the internal Time Stamp Enable bits */ SET_BIT(RTC->CR, RTC_CR_ITSE); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Deactivate Internal TimeStamp. * @param hrtc RTC handle * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc) { /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Configure the internal Time Stamp Enable bits */ CLEAR_BIT(RTC->CR, RTC_CR_ITSE); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Get the RTC TimeStamp value. * @param hrtc RTC handle * @param sTimeStamp Pointer to Time structure * @param sTimeStampDate Pointer to Date structure * @param Format specifies the format of the entered parameters. * This parameter can be one of the following values: * @arg RTC_FORMAT_BIN: Binary data format * @arg RTC_FORMAT_BCD: BCD data format * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format) { uint32_t tmptime; uint32_t tmpdate; UNUSED(hrtc); /* Check the parameters */ assert_param(IS_RTC_FORMAT(Format)); /* Get the TimeStamp time and date registers values */ tmptime = READ_BIT(RTC->TSTR, RTC_TR_RESERVED_MASK); tmpdate = READ_BIT(RTC->TSDR, RTC_DR_RESERVED_MASK); /* Fill the Time structure fields with the read parameters */ sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TSTR_HT | RTC_TSTR_HU)) >> RTC_TSTR_HU_Pos); sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TSTR_MNT | RTC_TSTR_MNU)) >> RTC_TSTR_MNU_Pos); sTimeStamp->Seconds = (uint8_t)((tmptime & (RTC_TSTR_ST | RTC_TSTR_SU)) >> RTC_TSTR_SU_Pos); sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TSTR_PM)) >> RTC_TSTR_PM_Pos); sTimeStamp->SubSeconds = READ_BIT(RTC->TSSSR, RTC_TSSSR_SS); /* Fill the Date structure fields with the read parameters */ sTimeStampDate->Year = 0U; sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_TSDR_MT | RTC_TSDR_MU)) >> RTC_TSDR_MU_Pos); sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_TSDR_DT | RTC_TSDR_DU)); sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_TSDR_WDU)) >> RTC_TSDR_WDU_Pos); /* Check the input parameters format */ if (Format == RTC_FORMAT_BIN) { /* Convert the TimeStamp structure parameters to Binary format */ sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours); sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes); sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds); /* Convert the DateTimeStamp structure parameters to Binary format */ sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month); sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date); sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay); } /* Clear the TIMESTAMP Flags */ WRITE_REG(RTC->SCR, (RTC_SCR_CITSF | RTC_SCR_CTSF)); return HAL_OK; } #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) /** * @brief Handle TimeStamp secure interrupt request. * @param hrtc RTC handle * @retval None */ void HAL_RTCEx_TimeStampIRQHandler(RTC_HandleTypeDef *hrtc) { if (READ_BIT(RTC->SMISR, RTC_SMISR_TSMF) != 0U) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call TimeStampEvent registered Callback */ hrtc->TimeStampEventCallback(hrtc); #else HAL_RTCEx_TimeStampEventCallback(hrtc); #endif /*(USE_HAL_RTC_REGISTER_CALLBACKS == 1)*/ /* Clearing flags after the Callback because the content of RTC_TSTR and RTC_TSDR are cleared when TSF bit is reset.*/ WRITE_REG(RTC->SCR, RTC_SCR_CITSF | RTC_SCR_CTSF); } /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; } #else /* #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ /** * @brief Handle TimeStamp non-secure interrupt request. * @param hrtc RTC handle * @retval None */ void HAL_RTCEx_TimeStampIRQHandler(RTC_HandleTypeDef *hrtc) { if (READ_BIT(RTC->MISR, RTC_MISR_TSMF) != 0U) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call TimeStampEvent registered Callback */ hrtc->TimeStampEventCallback(hrtc); #else HAL_RTCEx_TimeStampEventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ /* Clearing flags after the Callback because the content of RTC_TSTR and RTC_TSDR are cleared when TSF bit is reset.*/ WRITE_REG(RTC->SCR, RTC_SCR_CITSF | RTC_SCR_CTSF); } /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; } #endif /* #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ /** * @brief TimeStamp callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_TimeStampEventCallback could be implemented in the user file */ } /** * @brief Handle TimeStamp polling request. * @param hrtc RTC handle * @param Timeout Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) { uint32_t tickstart = HAL_GetTick(); while (READ_BIT(RTC->SR, RTC_SR_TSF) == 0U) { if (READ_BIT(RTC->SR, RTC_SR_TSOVF) != 0U) { /* Clear the TIMESTAMP OverRun Flag */ WRITE_REG(RTC->SCR, RTC_SCR_CTSOVF); /* Change TIMESTAMP state */ hrtc->State = HAL_RTC_STATE_ERROR; return HAL_ERROR; } if (Timeout != HAL_MAX_DELAY) { if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) { hrtc->State = HAL_RTC_STATE_TIMEOUT; return HAL_TIMEOUT; } } } /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; return HAL_OK; } /** * @} */ /** @addtogroup RTCEx_Exported_Functions_Group2 * @brief RTC Wake-up functions * @verbatim =============================================================================== ##### RTC Wake-up functions ##### =============================================================================== [..] This section provides functions allowing to configure Wake-up feature @endverbatim * @{ */ /** * @brief Set wake up timer. * @param hrtc RTC handle * @param WakeUpCounter Wake up counter * @param WakeUpClock Wake up clock * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock) { uint32_t tickstart; /* Check the parameters */ assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock)); assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Clear WUTE in RTC_CR to disable the wakeup timer */ CLEAR_BIT(RTC->CR, RTC_CR_WUTE); /* Poll WUTWF until it is set in RTC_ICSR to make sure the access to wakeup autoreload counter and to WUCKSEL[2:0] bits is allowed. This step must be skipped in calendar initialization mode. */ if (READ_BIT(RTC->ICSR, RTC_ICSR_INITF) == 0U) { tickstart = HAL_GetTick(); while (READ_BIT(RTC->ICSR, RTC_ICSR_WUTWF) == 0U) { if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_TIMEOUT; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_TIMEOUT; } } } /* Configure the clock source */ MODIFY_REG(RTC->CR, RTC_CR_WUCKSEL, (uint32_t)WakeUpClock); /* Configure the Wakeup Timer counter */ WRITE_REG(RTC->WUTR, (uint32_t)WakeUpCounter); /* Enable the Wakeup Timer */ SET_BIT(RTC->CR, RTC_CR_WUTE); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Set wake up timer with interrupt. * @param hrtc RTC handle * @param WakeUpCounter Wake up counter * @param WakeUpClock Wake up clock * @param WakeUpAutoClr Wake up auto clear value (look at WUTOCLR in reference manual) * - No effect if WakeUpAutoClr is set to zero * - This feature is meaningful in case of Low power mode to avoid any RTC software execution * after Wake Up. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock, uint32_t WakeUpAutoClr) { uint32_t tickstart; /* Check the parameters */ assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock)); assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter)); /* (0x0000<=WUTOCLR<=WUT) */ assert_param(WakeUpAutoClr <= WakeUpCounter); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Clear WUTE in RTC_CR to disable the wakeup timer */ CLEAR_BIT(RTC->CR, RTC_CR_WUTE); /* Clear flag Wake-Up */ WRITE_REG(RTC->SCR, RTC_SCR_CWUTF); /* Poll WUTWF until it is set in RTC_ICSR to make sure the access to wakeup autoreload counter and to WUCKSEL[2:0] bits is allowed. This step must be skipped in calendar initialization mode. */ if (READ_BIT(RTC->ICSR, RTC_ICSR_INITF) == 0U) { tickstart = HAL_GetTick(); while (READ_BIT(RTC->ICSR, RTC_ICSR_WUTWF) == 0U) { if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_TIMEOUT; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_TIMEOUT; } } } /* Configure the Wakeup Timer counter and auto clear value */ WRITE_REG(RTC->WUTR, (uint32_t)(WakeUpCounter | (WakeUpAutoClr << RTC_WUTR_WUTOCLR_Pos))); /* Configure the clock source */ MODIFY_REG(RTC->CR, RTC_CR_WUCKSEL, (uint32_t)WakeUpClock); /* Configure the Interrupt in the RTC_CR register and Enable the Wakeup Timer*/ SET_BIT(RTC->CR, (RTC_CR_WUTIE | RTC_CR_WUTE)); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Deactivate wake up timer counter. * @param hrtc RTC handle * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc) { uint32_t tickstart; /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Disable the Wakeup Timer */ /* In case of interrupt mode is used, the interrupt source must disabled */ CLEAR_BIT(RTC->CR, (RTC_CR_WUTE | RTC_CR_WUTIE)); tickstart = HAL_GetTick(); /* Wait till RTC WUTWF flag is set and if Time out is reached exit */ while (READ_BIT(RTC->ICSR, RTC_ICSR_WUTWF) == 0U) { if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_TIMEOUT; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_TIMEOUT; } } /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Get wake up timer counter. * @param hrtc RTC handle * @retval Counter value */ uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc) { UNUSED(hrtc); /* Get the counter value */ return (uint32_t)(READ_BIT(RTC->WUTR, RTC_WUTR_WUT)); } #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) /** * @brief Handle Wake Up Timer secure interrupt request. * @param hrtc RTC handle * @retval None */ void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc) { if ((RTC->SMISR & RTC_SMISR_WUTMF) != 0u) { /* Immediately clear flags */ WRITE_REG(RTC->SCR, RTC_SCR_CWUTF); #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call wake up timer registered Callback */ hrtc->WakeUpTimerEventCallback(hrtc); #else HAL_RTCEx_WakeUpTimerEventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; } #else /* #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ /** * @brief Handle Wake Up Timer non-secure interrupt request. * @param hrtc RTC handle * @retval None */ void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc) { /* Get the pending status of the WAKEUPTIMER Interrupt */ if (READ_BIT(RTC->MISR, RTC_MISR_WUTMF) != 0U) { /* Clear the WAKEUPTIMER interrupt pending bit */ WRITE_REG(RTC->SCR, RTC_SCR_CWUTF); #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call WakeUpTimerEvent registered Callback */ hrtc->WakeUpTimerEventCallback(hrtc); #else /* WAKEUPTIMER callback */ HAL_RTCEx_WakeUpTimerEventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ } /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; } #endif /* #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ /** * @brief Wake Up Timer callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_WakeUpTimerEventCallback could be implemented in the user file */ } /** * @brief Handle Wake Up Timer Polling. * @param hrtc RTC handle * @param Timeout Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) { uint32_t tickstart = HAL_GetTick(); while (READ_BIT(RTC->SR, RTC_SR_WUTF) == 0U) { if (Timeout != HAL_MAX_DELAY) { if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) { hrtc->State = HAL_RTC_STATE_TIMEOUT; return HAL_TIMEOUT; } } } /* Clear the WAKEUPTIMER Flag */ WRITE_REG(RTC->SCR, RTC_SCR_CWUTF); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; return HAL_OK; } /** * @} */ /** @addtogroup RTCEx_Exported_Functions_Group3 * @brief Extended Peripheral Control functions * @verbatim =============================================================================== ##### Extended Peripheral Control functions ##### =============================================================================== [..] This subsection provides functions allowing to (+) Write a data in a specified RTC Backup data register (+) Read a data in a specified RTC Backup data register (+) Set the Coarse calibration parameters. (+) Deactivate the Coarse calibration parameters (+) Set the Smooth calibration parameters. (+) Set Low Power calibration parameter. (+) Configure the Synchronization Shift Control Settings. (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). (+) Enable the RTC reference clock detection. (+) Disable the RTC reference clock detection. (+) Enable the Bypass Shadow feature. (+) Disable the Bypass Shadow feature. @endverbatim * @{ */ /** * @brief Set the Smooth calibration parameters. * @note To deactivate the smooth calibration, the field SmoothCalibPlusPulses * must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field * SmoothCalibMinusPulsesValue must be equal to 0. * @param hrtc RTC handle * @param SmoothCalibPeriod Select the Smooth Calibration Period. * This parameter can be can be one of the following values : * @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s. * @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s. * @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s. * @param SmoothCalibPlusPulses Select to Set or reset the CALP bit. * This parameter can be one of the following values: * @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses. * @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added. * @param SmoothCalibMinusPulsesValue Select the value of CALM[8:0] bits. * This parameter can be one any value from 0 to 0x000001FF. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue) { uint32_t tickstart; /* Check the parameters */ assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod)); assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses)); assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmoothCalibMinusPulsesValue)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* check if a calibration is pending*/ if (READ_BIT(RTC->ICSR, RTC_ICSR_RECALPF) != 0U) { tickstart = HAL_GetTick(); /* check if a calibration is pending*/ while (READ_BIT(RTC->ICSR, RTC_ICSR_RECALPF) != 0U) { if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_TIMEOUT; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_TIMEOUT; } } } /* Configure the Smooth calibration settings */ MODIFY_REG(RTC->CALR, (RTC_CALR_CALP | RTC_CALR_CALW8 | RTC_CALR_CALW16 | RTC_CALR_CALM), (uint32_t)(SmoothCalibPeriod | SmoothCalibPlusPulses | SmoothCalibMinusPulsesValue)); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Select the low power Calibration mode. * @param hrtc: RTC handle * @param LowPowerCalib: Low power Calibration mode. * This parameter can be can be one of the following values : * @arg RTC_LPCAL_SET: Low power mode. * @arg RTC_LPCAL_RESET: High consumption mode. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetLowPowerCalib(RTC_HandleTypeDef *hrtc, uint32_t LowPowerCalib) { /* Check the parameters */ assert_param(IS_RTC_LOW_POWER_CALIB(LowPowerCalib)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Configure the Smooth calibration settings */ MODIFY_REG(RTC->CALR, RTC_CALR_LPCAL, LowPowerCalib); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Configure the Synchronization Shift Control Settings. * @note When REFCKON is set, firmware must not write to Shift control register. * @param hrtc RTC handle * @param ShiftAdd1S Select to add or not 1 second to the time calendar. * This parameter can be one of the following values: * @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar. * @arg RTC_SHIFTADD1S_RESET: No effect. * @param ShiftSubFS Select the number of Second Fractions to substitute. * This parameter can be one any value from 0 to 0x7FFF. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS) { uint32_t tickstart; /* Check the parameters */ assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S)); assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); tickstart = HAL_GetTick(); /* Wait until the shift is completed*/ while (READ_BIT(RTC->ICSR, RTC_ICSR_SHPF) != 0U) { if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_TIMEOUT; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_TIMEOUT; } } /* Check if the reference clock detection is disabled */ if (READ_BIT(RTC->CR, RTC_CR_REFCKON) == 0U) { /* Configure the Shift settings */ MODIFY_REG(RTC->SHIFTR, RTC_SHIFTR_SUBFS, (uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S)); /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ if (READ_BIT(RTC->CR, RTC_CR_BYPSHAD) == 0U) { if (HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_ERROR; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_ERROR; } } } else { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_ERROR; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_ERROR; } /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). * @param hrtc RTC handle * @param CalibOutput Select the Calibration output Selection . * This parameter can be one of the following values: * @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz. * @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput) { /* Check the parameters */ assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Configure the RTC_CR register */ MODIFY_REG(RTC->CR, RTC_CR_COSEL, CalibOutput); /* Enable calibration output */ SET_BIT(RTC->CR, RTC_CR_COE); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). * @param hrtc RTC handle * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc) { /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Disable calibration output */ CLEAR_BIT(RTC->CR, RTC_CR_COE); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Enable the RTC reference clock detection. * @param hrtc RTC handle * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc) { HAL_StatusTypeDef status; /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Enter Initialization mode */ status = RTC_EnterInitMode(hrtc); if (status == HAL_OK) { /* Enable clockref detection */ SET_BIT(RTC->CR, RTC_CR_REFCKON); /* Exit Initialization mode */ status = RTC_ExitInitMode(hrtc); } /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); if (status == HAL_OK) { hrtc->State = HAL_RTC_STATE_READY; } /* Process Unlocked */ __HAL_UNLOCK(hrtc); return status; } /** * @brief Disable the RTC reference clock detection. * @param hrtc RTC handle * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc) { HAL_StatusTypeDef status; /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Enter Initialization mode */ status = RTC_EnterInitMode(hrtc); if (status == HAL_OK) { /* Disable clockref detection */ CLEAR_BIT(RTC->CR, RTC_CR_REFCKON); /* Exit Initialization mode */ status = RTC_ExitInitMode(hrtc); } /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); if (status == HAL_OK) { hrtc->State = HAL_RTC_STATE_READY; } /* Process Unlocked */ __HAL_UNLOCK(hrtc); return status; } /** * @brief Enable the Bypass Shadow feature. * @note When the Bypass Shadow is enabled the calendar value are taken * directly from the Calendar counter. * @param hrtc RTC handle * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc) { /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Set the BYPSHAD bit */ SET_BIT(RTC->CR, RTC_CR_BYPSHAD); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Disable the Bypass Shadow feature. * @note When the Bypass Shadow is enabled the calendar value are taken * directly from the Calendar counter. * @param hrtc RTC handle * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc) { /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Reset the BYPSHAD bit */ CLEAR_BIT(RTC->CR, RTC_CR_BYPSHAD); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Increment Monotonic counter. * @param hrtc RTC handle * @param Instance Monotonic counter Instance * This parameter can be can be one of the following values : * @arg RTC_MONOTONIC_COUNTER_1 * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_MonotonicCounterIncrement(RTC_HandleTypeDef *hrtc, uint32_t Instance) { UNUSED(hrtc); UNUSED(Instance); /* This register is read-only only and is incremented by one when a write access is done to this register. This register cannot roll-over and is frozen when reaching the maximum value. */ CLEAR_REG(TAMP->COUNTR); return HAL_OK; } /** * @brief Monotonic counter incrementation. * @param hrtc RTC handle * @param Instance Monotonic counter Instance * This parameter can be can be one of the following values : * @arg RTC_MONOTONIC_COUNTER_1 * @param Value Pointer to the counter monotonic counter value * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_MonotonicCounterGet(RTC_HandleTypeDef *hrtc, uint32_t Instance, uint32_t *Value) { UNUSED(hrtc); UNUSED(Instance); /* This register is read-only only and is incremented by one when a write access is done to this register. This register cannot roll-over and is frozen when reaching the maximum value. */ *Value = READ_REG(TAMP->COUNTR); return HAL_OK; } /** * @brief Set SSR Underflow detection with Interrupt. * @param hrtc RTC handle * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetSSRU_IT(RTC_HandleTypeDef *hrtc) { /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Enable IT SSRU */ __HAL_RTC_SSRU_ENABLE_IT(hrtc, RTC_IT_SSRU); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Deactivate SSR Underflow. * @param hrtc RTC handle * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateSSRU(RTC_HandleTypeDef *hrtc) { /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* In case of interrupt mode is used, the interrupt source must disabled */ __HAL_RTC_SSRU_DISABLE_IT(hrtc, RTC_IT_TS); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) /** * @brief Handle SSR underflow interrupt request. * @param hrtc RTC handle * @retval None */ void HAL_RTCEx_SSRUIRQHandler(RTC_HandleTypeDef *hrtc) { if ((RTC->SMISR & RTC_SMISR_SSRUMF) != 0u) { /* Immediately clear flags */ RTC->SCR = RTC_SCR_CSSRUF; /* SSRU callback */ #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call SSRUEvent registered Callback */ hrtc->SSRUEventCallback(hrtc); #else HAL_RTCEx_SSRUEventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ } /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; } #else /** * @brief Handle SSR underflow interrupt request. * @param hrtc RTC handle * @retval None */ void HAL_RTCEx_SSRUIRQHandler(RTC_HandleTypeDef *hrtc) { if ((RTC->MISR & RTC_MISR_SSRUMF) != 0u) { /* Immediately clear flags */ RTC->SCR = RTC_SCR_CSSRUF; /* SSRU callback */ #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call SSRUEvent registered Callback */ hrtc->SSRUEventCallback(hrtc); #else HAL_RTCEx_SSRUEventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; } #endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ /** * @brief SSR underflow callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_SSRUEventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_SSRUEventCallback could be implemented in the user file */ } /** * @} */ /** @addtogroup RTCEx_Exported_Functions_Group4 * @brief Extended features functions * @verbatim =============================================================================== ##### Extended features functions ##### =============================================================================== [..] This section provides functions allowing to: (+) RTC Alarm B callback (+) RTC Poll for Alarm B request @endverbatim * @{ */ /** * @brief Alarm B callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_AlarmBEventCallback could be implemented in the user file */ } /** * @brief Handle Alarm B Polling request. * @param hrtc RTC handle * @param Timeout Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) { uint32_t tickstart = HAL_GetTick(); while (READ_BIT(RTC->SR, RTC_SR_ALRBF) == 0U) { if (Timeout != HAL_MAX_DELAY) { if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) { hrtc->State = HAL_RTC_STATE_TIMEOUT; return HAL_TIMEOUT; } } } /* Clear the Alarm Flag */ WRITE_REG(RTC->SCR, RTC_SCR_CALRBF); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; return HAL_OK; } /** * @} */ /** @addtogroup RTCEx_Exported_Functions_Group5 * @brief Extended RTC Tamper functions * @verbatim ============================================================================== ##### Tamper functions ##### ============================================================================== [..] (+) Before calling any tamper or internal tamper function, you have to call first HAL_RTC_Init() function. (+) In that ine you can select to output tamper event on RTC pin. [..] (+) Enable the Tamper and configure the Tamper filter count, trigger Edge or Level according to the Tamper filter (if equal to 0 Edge else Level) value, sampling frequency, NoErase, MaskFlag, precharge or discharge and Pull-UP, timestamp using the HAL_RTCEx_SetTamper() function. You can configure Tamper with interrupt mode using HAL_RTCEx_SetTamper_IT() function. (+) The default configuration of the Tamper erases the backup registers. To avoid erase, enable the NoErase field on the TAMP_TAMPCR register. [..] (+) Enable Internal Tamper and configure it with interrupt, timestamp using the HAL_RTCEx_SetInternalTamper() function. @endverbatim * @{ */ /** * @brief Set Tamper * @param hrtc RTC handle * @param sTamper Pointer to Tamper Structure. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper) { uint32_t tmpreg; /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* Check the parameters */ assert_param(IS_RTC_TAMPER(sTamper->Tamper)); assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase)); assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag)); assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); /* Mask flag only supported by TAMPER 1, 2 and 3 */ assert_param(!((sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) && (sTamper->Tamper > RTC_TAMPER_3))); assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter)); assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); /* Trigger and Filter have exclusive configurations */ assert_param(((sTamper->Filter != RTC_TAMPERFILTER_DISABLE) && \ ((sTamper->Trigger == RTC_TAMPERTRIGGER_LOWLEVEL) || \ (sTamper->Trigger == RTC_TAMPERTRIGGER_HIGHLEVEL))) \ || ((sTamper->Filter == RTC_TAMPERFILTER_DISABLE) && \ ((sTamper->Trigger == RTC_TAMPERTRIGGER_RISINGEDGE) || \ (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE)))); /* Configuration register 2 */ tmpreg = READ_REG(TAMP->CR2); tmpreg &= ~((sTamper->Tamper << TAMP_CR2_TAMP1TRG_Pos) | (sTamper->Tamper << TAMP_CR2_TAMP1MSK_Pos) | \ (sTamper->Tamper << TAMP_CR2_TAMP1NOERASE_Pos)); if ((sTamper->Trigger == RTC_TAMPERTRIGGER_HIGHLEVEL) || (sTamper->Trigger == RTC_TAMPERTRIGGER_FALLINGEDGE)) { tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1TRG_Pos); } if (sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) { tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1MSK_Pos); } if (sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) { tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1NOERASE_Pos); } WRITE_REG(TAMP->CR2, tmpreg); /* Filter control register */ WRITE_REG(TAMP->FLTCR, sTamper->Filter | sTamper->SamplingFrequency | sTamper->PrechargeDuration | \ sTamper->TamperPullUp); /* Timestamp on tamper */ if (READ_BIT(RTC->CR, RTC_CR_TAMPTS) != sTamper->TimeStampOnTamperDetection) { __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); MODIFY_REG(RTC->CR, RTC_CR_TAMPTS, sTamper->TimeStampOnTamperDetection); __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); } /* Control register 1 */ SET_BIT(TAMP->CR1, sTamper->Tamper); return HAL_OK; } /** * @brief Set Tamper in IT mode * @param hrtc RTC handle * @param sTamper Pointer to Tamper Structure. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef *sTamper) { uint32_t tmpreg; /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* Check the parameters */ assert_param(IS_RTC_TAMPER(sTamper->Tamper)); assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger)); assert_param(IS_RTC_TAMPER_ERASE_MODE(sTamper->NoErase)); assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sTamper->MaskFlag)); assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter)); assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); /* Configuration register 2 */ tmpreg = READ_REG(TAMP->CR2); tmpreg &= ~((sTamper->Tamper << TAMP_CR2_TAMP1TRG_Pos) | (sTamper->Tamper << TAMP_CR2_TAMP1MSK_Pos) | \ (sTamper->Tamper << TAMP_CR2_TAMP1NOERASE_Pos)); if (sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE) { tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1TRG_Pos); } if (sTamper->MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) { /* Feature only supported by TAMPER 1, 2 and 3 */ if (sTamper->Tamper < RTC_TAMPER_4) { tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1MSK_Pos); } else { return HAL_ERROR; } } if (sTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) { tmpreg |= (sTamper->Tamper << TAMP_CR2_TAMP1NOERASE_Pos); } WRITE_REG(TAMP->CR2, tmpreg); /* Filter control register */ WRITE_REG(TAMP->FLTCR, sTamper->Filter | sTamper->SamplingFrequency | sTamper->PrechargeDuration | \ sTamper->TamperPullUp); /* Timestamp on tamper */ if (READ_BIT(RTC->CR, RTC_CR_TAMPTS) != sTamper->TimeStampOnTamperDetection) { __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); MODIFY_REG(RTC->CR, RTC_CR_TAMPTS, sTamper->TimeStampOnTamperDetection); __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); } /* Interrupt enable register */ SET_BIT(TAMP->IER, sTamper->Tamper); /* Control register 1 */ SET_BIT(TAMP->CR1, sTamper->Tamper); return HAL_OK; } /** * @brief Deactivate Tamper. * @param hrtc RTC handle * @param Tamper Selected tamper pin. * This parameter can be a combination of the following values: * @arg RTC_TAMPER_1 * @arg RTC_TAMPER_2 * @arg RTC_TAMPER_3 * @arg RTC_TAMPER_4 * @arg RTC_TAMPER_5 * @arg RTC_TAMPER_6 * @arg RTC_TAMPER_7 * @arg RTC_TAMPER_8 * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper) { UNUSED(hrtc); assert_param(IS_RTC_TAMPER(Tamper)); /* Disable the selected Tamper pin */ CLEAR_BIT(TAMP->CR1, Tamper); /* Clear tamper mask/noerase/trigger configuration */ CLEAR_BIT(TAMP->CR2, (Tamper << TAMP_CR2_TAMP1TRG_Pos) | (Tamper << TAMP_CR2_TAMP1MSK_Pos) | \ (Tamper << TAMP_CR2_TAMP1NOERASE_Pos)); /* Clear tamper interrupt mode configuration */ CLEAR_BIT(TAMP->IER, Tamper); /* Clear tamper interrupt and event flags (WO register) */ WRITE_REG(TAMP->SCR, Tamper); return HAL_OK; } /** * @brief Set all active Tampers at the same time. * @param hrtc RTC handle * @param sAllTamper Pointer to active Tamper Structure. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetActiveTampers(RTC_HandleTypeDef *hrtc, RTC_ActiveTampersTypeDef *sAllTamper) { uint32_t IER; uint32_t CR1; uint32_t CR2; uint32_t ATCR1; uint32_t ATCR2; uint32_t CR; uint32_t i; uint32_t tickstart; #ifdef USE_FULL_ASSERT for (i = 0; i < RTC_TAMP_NB; i++) { assert_param(IS_RTC_TAMPER_ERASE_MODE(sAllTamper->TampInput[i].NoErase)); assert_param(IS_RTC_TAMPER_MASKFLAG_STATE(sAllTamper->TampInput[i].MaskFlag)); /* Mask flag only supported by TAMPER 1, 2 and 3 */ assert_param(!((sAllTamper->TampInput[i].MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) && (i > RTC_TAMPER_3))); } assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sAllTamper->TimeStampOnTamperDetection)); #endif /* USE_FULL_ASSERT */ /* Active Tampers must not be already enabled */ if (READ_BIT(TAMP->ATOR, TAMP_ATOR_INITS) != 0U) { /* Disable all actives tampers with HAL_RTCEx_DeactivateActiveTampers. No need to check return value because it returns always HAL_OK */ (void) HAL_RTCEx_DeactivateActiveTampers(hrtc); } /* Set TimeStamp on tamper detection */ CR = READ_REG(RTC->CR); if ((CR & RTC_CR_TAMPTS) != (sAllTamper->TimeStampOnTamperDetection)) { __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); MODIFY_REG(RTC->CR, RTC_CR_TAMPTS, sAllTamper->TimeStampOnTamperDetection); __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); } CR1 = READ_REG(TAMP->CR1); CR2 = READ_REG(TAMP->CR2); ATCR2 = 0U; IER = READ_REG(TAMP->IER); /* Set common parameters */ ATCR1 = (sAllTamper->ActiveFilter | (sAllTamper->ActiveOutputChangePeriod << TAMP_ATCR1_ATPER_Pos) | \ sAllTamper->ActiveAsyncPrescaler); /* Set specific parameters for each active tamper inputs if enable */ for (i = 0; i < RTC_TAMP_NB; i++) { if (sAllTamper->TampInput[i].Enable != RTC_ATAMP_DISABLE) { CR1 |= (TAMP_CR1_TAMP1E << i); ATCR1 |= (TAMP_ATCR1_TAMP1AM << i); if (sAllTamper->TampInput[i].Interrupt != RTC_ATAMP_INTERRUPT_DISABLE) { /* Interrupt enable register */ IER |= (TAMP_IER_TAMP1IE << i); } if (sAllTamper->TampInput[i].MaskFlag != RTC_TAMPERMASK_FLAG_DISABLE) { CR2 |= (TAMP_CR2_TAMP1MSK << i); } if (sAllTamper->TampInput[i].NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) { CR2 |= (TAMP_CR2_TAMP1NOERASE << i); } /* Configure ATOSELx[] in case of output sharing */ ATCR2 |= sAllTamper->TampInput[i].Output << ((3u * i) + TAMP_ATCR2_ATOSEL1_Pos); if (i != sAllTamper->TampInput[i].Output) { ATCR1 |= TAMP_ATCR1_ATOSHARE; } } } WRITE_REG(TAMP->IER, IER); WRITE_REG(TAMP->IER, IER); WRITE_REG(TAMP->ATCR1, ATCR1); WRITE_REG(TAMP->ATCR2, ATCR2); WRITE_REG(TAMP->CR2, CR2); WRITE_REG(TAMP->CR1, CR1); /* Write seed */ for (i = 0; i < RTC_ATAMP_SEED_NB_UINT32; i++) { WRITE_REG(TAMP->ATSEEDR, sAllTamper->Seed[i]); } /* Wait till RTC SEEDF flag is set and if Time out is reached exit */ tickstart = HAL_GetTick(); while (READ_BIT(TAMP->ATOR, TAMP_ATOR_SEEDF) != 0u) { if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) { hrtc->State = HAL_RTC_STATE_TIMEOUT; return HAL_TIMEOUT; } } return HAL_OK; } /** * @brief Get active Tampers configuration. * @param sAllTamper Pointer to active Tamper Structure. * @retval none */ void HAL_RTCEx_GetActiveTampers(RTC_ActiveTampersTypeDef *sAllTamper) { uint32_t i ; sAllTamper->ActiveFilter = (uint32_t)(TAMP->ATCR1 & TAMP_ATCR1_FLTEN); sAllTamper->ActiveOutputChangePeriod = (uint32_t)((TAMP->ATCR1 & TAMP_ATCR1_ATPER) >> TAMP_ATCR1_ATPER_Pos); sAllTamper->ActiveAsyncPrescaler = (uint32_t)(TAMP->ATCR1 & TAMP_ATCR1_ATCKSEL); sAllTamper->TimeStampOnTamperDetection = (uint32_t)(RTC->CR & RTC_CR_TAMPTS); /* Set specific parameters for each active tamper inputs if enable */ for (i = 0; i < RTC_TAMP_NB; i++) { sAllTamper->TampInput[i].Enable = (uint32_t)(((TAMP->CR1 & (TAMP_CR1_TAMP1E << i))) >> i); sAllTamper->TampInput[i].Interrupt = (uint32_t)(((TAMP->IER & (TAMP_IER_TAMP1IE << i))) >> i); sAllTamper->TampInput[i].MaskFlag = (uint32_t)(((TAMP->CR2 & (TAMP_CR2_TAMP1MSK << i))) >> i); sAllTamper->TampInput[i].NoErase = (uint32_t)(((TAMP->CR2 & (TAMP_CR2_TAMP1NOERASE << i))) >> i); sAllTamper->TampInput[i].Output = (uint32_t)(((TAMP->ATCR2 & (TAMP_ATCR2_ATOSEL1 << ((3u * i)))) \ >> ((3u * i) + TAMP_ATCR2_ATOSEL1_Pos))); } } /** * @brief Write a new seed. Active tamper must be enabled. * @param hrtc RTC handle * @param pSeed Pointer to active tamper seed values. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetActiveSeed(RTC_HandleTypeDef *hrtc, uint32_t *pSeed) { uint32_t i; uint32_t tickstart; /* Active Tampers must be enabled */ if (READ_BIT(TAMP->ATOR, TAMP_ATOR_INITS) == 0U) { return HAL_ERROR; } for (i = 0; i < RTC_ATAMP_SEED_NB_UINT32; i++) { WRITE_REG(TAMP->ATSEEDR, pSeed[i]); } /* Wait till RTC SEEDF flag is set and if Time out is reached exit */ tickstart = HAL_GetTick(); while (READ_BIT(TAMP->ATOR, TAMP_ATOR_SEEDF) != 0U) { if ((HAL_GetTick() - tickstart) > RTC_TIMEOUT_VALUE) { hrtc->State = HAL_RTC_STATE_TIMEOUT; return HAL_TIMEOUT; } } return HAL_OK; } /** * @brief Lock the Boot hardware Key * @param hrtc RTC handle * @note The backup registers from TAMP_BKP0R to TAMP_BKP7R cannot be accessed neither in * read nor in write (they are read as 0 and write ignore). * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetBoothardwareKey(RTC_HandleTypeDef *hrtc) { UNUSED(hrtc); WRITE_REG(TAMP->SECCFGR, TAMP_SECCFGR_BHKLOCK); return HAL_OK; } /** * @brief Deactivate all Active Tampers at the same time. * @param hrtc RTC handle * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateActiveTampers(RTC_HandleTypeDef *hrtc) { /* Get Active tampers */ uint32_t ATamp_mask = READ_BIT(TAMP->ATCR1, TAMP_ALL); UNUSED(hrtc); /* Disable all actives tampers but not passives tampers */ CLEAR_BIT(TAMP->CR1, ATamp_mask); /* Disable no erase and mask */ CLEAR_BIT(TAMP->CR2, (ATamp_mask | ((ATamp_mask & (TAMP_ATCR1_TAMP1AM | TAMP_ATCR1_TAMP2AM | TAMP_ATCR1_TAMP3AM))\ << TAMP_CR2_TAMP1MSK_Pos))); /* Clear tamper interrupt and event flags (WO register) of all actives tampers but not passives tampers */ WRITE_REG(TAMP->SCR, ATamp_mask); /* Clear all active tampers interrupt mode configuration but not passives tampers */ CLEAR_BIT(TAMP->IER, ATamp_mask); CLEAR_BIT(TAMP->ATCR1, TAMP_ALL | TAMP_ATCR1_ATCKSEL | TAMP_ATCR1_ATPER | \ TAMP_ATCR1_ATOSHARE | TAMP_ATCR1_FLTEN); CLEAR_BIT(TAMP->ATCR2, TAMP_ATCR2_ATOSEL1 | TAMP_ATCR2_ATOSEL2 | TAMP_ATCR2_ATOSEL3 | TAMP_ATCR2_ATOSEL4 | TAMP_ATCR2_ATOSEL5 | TAMP_ATCR2_ATOSEL6 | TAMP_ATCR2_ATOSEL7 | TAMP_ATCR2_ATOSEL8); return HAL_OK; } /** * @brief Tamper event polling. * @param hrtc RTC handle * @param Tamper Selected tamper pin. * This parameter can be a combination of the following values: * @arg RTC_TAMPER_1 * @arg RTC_TAMPER_2 * @arg RTC_TAMPER_3 * @arg RTC_TAMPER_4 * @arg RTC_TAMPER_5 * @arg RTC_TAMPER_6 * @arg RTC_TAMPER_7 * @arg RTC_TAMPER_8 * @param Timeout Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_PollForTamperEvent(RTC_HandleTypeDef *hrtc, uint32_t Tamper, uint32_t Timeout) { UNUSED(hrtc); assert_param(IS_RTC_TAMPER(Tamper)); uint32_t tickstart = HAL_GetTick(); /* Get the status of the Interrupt */ while (READ_BIT(TAMP->SR, Tamper) != Tamper) { if (Timeout != HAL_MAX_DELAY) { if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) { return HAL_TIMEOUT; } } } /* Clear the Tamper Flag */ WRITE_REG(TAMP->SCR, Tamper); return HAL_OK; } /** * @brief Set Internal Tamper * @param hrtc RTC handle * @param sIntTamper Pointer to Internal Tamper Structure. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper(RTC_HandleTypeDef *hrtc, RTC_InternalTamperTypeDef *sIntTamper) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* Check the parameters */ assert_param(IS_RTC_INTERNAL_TAMPER(sIntTamper->IntTamper)); assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sIntTamper->TimeStampOnTamperDetection)); assert_param(IS_RTC_TAMPER_ERASE_MODE(sIntTamper->NoErase)); /* timestamp on internal tamper */ if (READ_BIT(RTC->CR, RTC_CR_TAMPTS) != sIntTamper->TimeStampOnTamperDetection) { __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); MODIFY_REG(RTC->CR, RTC_CR_TAMPTS, sIntTamper->TimeStampOnTamperDetection); __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); } if (sIntTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) { /* Control register 3 */ SET_BIT(TAMP->CR3, (sIntTamper->IntTamper >> (TAMP_CR1_ITAMP1E_Pos - TAMP_CR3_ITAMP1NOER_Pos))); } else { CLEAR_BIT(TAMP->CR3, (sIntTamper->IntTamper >> (TAMP_CR1_ITAMP1E_Pos - TAMP_CR3_ITAMP1NOER_Pos))); } /* Control register 1 */ SET_BIT(TAMP->CR1, sIntTamper->IntTamper); return HAL_OK; } /** * @brief Get Internal Tamper Configuration * @param sIntTamper Pointer to Internal Tamper Structure. * @retval HAL status */ void HAL_RTCEx_GetInternalTampers(RTC_InternalTamperTypeDef *sIntTamper) { sIntTamper->IntTamper = (uint32_t)(TAMP->CR1 & (RTC_INT_TAMPER_ALL)); sIntTamper->TimeStampOnTamperDetection = (uint32_t)(RTC->CR & RTC_CR_TAMPTS); if ((uint32_t)(TAMP->CR3 & (sIntTamper->IntTamper >> (TAMP_CR1_ITAMP1E_Pos - TAMP_CR3_ITAMP1NOER_Pos))) != 0U) { sIntTamper->NoErase = RTC_TAMPER_ERASE_BACKUP_DISABLE; } else { sIntTamper->NoErase = RTC_TAMPER_ERASE_BACKUP_ENABLE; } } /** * @brief Set Internal Tamper in interrupt mode * @param hrtc RTC handle * @param sIntTamper Pointer to Internal Tamper Structure. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper_IT(RTC_HandleTypeDef *hrtc, RTC_InternalTamperTypeDef *sIntTamper) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* Check the parameters */ assert_param(IS_RTC_INTERNAL_TAMPER(sIntTamper->IntTamper)); assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sIntTamper->TimeStampOnTamperDetection)); assert_param(IS_RTC_TAMPER_ERASE_MODE(sIntTamper->NoErase)); /* timestamp on internal tamper */ if (READ_BIT(RTC->CR, RTC_CR_TAMPTS) != sIntTamper->TimeStampOnTamperDetection) { __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); MODIFY_REG(RTC->CR, RTC_CR_TAMPTS, sIntTamper->TimeStampOnTamperDetection); __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); } /* Interrupt enable register */ SET_BIT(TAMP->IER, sIntTamper->IntTamper); if (sIntTamper->NoErase != RTC_TAMPER_ERASE_BACKUP_ENABLE) { /* Control register 3 */ SET_BIT(TAMP->CR3, (sIntTamper->IntTamper >> (TAMP_CR1_ITAMP1E_Pos - TAMP_CR3_ITAMP1NOER_Pos))); } else { CLEAR_BIT(TAMP->CR3, (sIntTamper->IntTamper >> (TAMP_CR1_ITAMP1E_Pos - TAMP_CR3_ITAMP1NOER_Pos))); } /* Control register 1 */ SET_BIT(TAMP->CR1, sIntTamper->IntTamper); return HAL_OK; } /** * @brief Deactivate Internal Tamper. * @param hrtc RTC handle * @param IntTamper Selected internal tamper event. * This parameter can be any combination of existing internal tampers. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTamper(RTC_HandleTypeDef *hrtc, uint32_t IntTamper) { UNUSED(hrtc); assert_param(IS_RTC_INTERNAL_TAMPER(IntTamper)); /* Disable the selected Tamper pin */ CLEAR_BIT(TAMP->CR1, IntTamper); /* Clear internal tamper interrupt mode configuration */ CLEAR_BIT(TAMP->IER, IntTamper); /* Clear internal tamper interrupt */ WRITE_REG(TAMP->SCR, IntTamper); return HAL_OK; } /** * @brief Internal Tamper event polling. * @param hrtc RTC handle * @param IntTamper selected tamper. * This parameter can be any combination of existing internal tampers. * @param Timeout Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_PollForInternalTamperEvent(RTC_HandleTypeDef *hrtc, uint32_t IntTamper, uint32_t Timeout) { UNUSED(hrtc); assert_param(IS_RTC_INTERNAL_TAMPER(IntTamper)); uint32_t tickstart = HAL_GetTick(); /* Get the status of the Interrupt */ while (READ_BIT(TAMP->SR, IntTamper) != IntTamper) { if (Timeout != HAL_MAX_DELAY) { if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) { return HAL_TIMEOUT; } } } /* Clear the Tamper Flag */ WRITE_REG(TAMP->SCR, IntTamper); return HAL_OK; } #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) /** @brief Handle Tamper secure interrupt request. * @param hrtc RTC handle * @retval None */ void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc) { uint32_t tmp; /* Get secure interrupt status */ tmp = READ_REG(TAMP->SMISR); /* Immediately clear flags */ WRITE_REG(TAMP->SCR, tmp); /* Check Tamper1 status */ if ((tmp & RTC_TAMPER_1) == RTC_TAMPER_1) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 1 Event registered secure Callback */ hrtc->Tamper1EventCallback(hrtc); #else /* Tamper1 secure callback */ HAL_RTCEx_Tamper1EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Tamper2 status */ if ((tmp & RTC_TAMPER_2) == RTC_TAMPER_2) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 2 Event registered secure Callback */ hrtc->Tamper2EventCallback(hrtc); #else /* Tamper2 secure callback */ HAL_RTCEx_Tamper2EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Tamper3 status */ if ((tmp & RTC_TAMPER_3) == RTC_TAMPER_3) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 3 Event registered secure Callback */ hrtc->Tamper3EventCallback(hrtc); #else /* Tamper3 secure callback */ HAL_RTCEx_Tamper3EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Tamper4 status */ if ((tmp & RTC_TAMPER_4) == RTC_TAMPER_4) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 4 Event registered secure Callback */ hrtc->Tamper4EventCallback(hrtc); #else /* Tamper4 secure callback */ HAL_RTCEx_Tamper4EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Tamper5 status */ if ((tmp & RTC_TAMPER_5) == RTC_TAMPER_5) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 5 Event registered secure Callback */ hrtc->Tamper5EventCallback(hrtc); #else /* Tamper5 secure callback */ HAL_RTCEx_Tamper5EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Tamper6 status */ if ((tmp & RTC_TAMPER_6) == RTC_TAMPER_6) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 6 Event registered secure Callback */ hrtc->Tamper6EventCallback(hrtc); #else /* Tamper6 secure callback */ HAL_RTCEx_Tamper6EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Tamper7 status */ if ((tmp & RTC_TAMPER_7) == RTC_TAMPER_7) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 7 Event registered secure Callback */ hrtc->Tamper7EventCallback(hrtc); #else /* Tamper7 secure callback */ HAL_RTCEx_Tamper7EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Tamper8 status */ if ((tmp & RTC_TAMPER_8) == RTC_TAMPER_8) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 8 Event registered secure Callback */ hrtc->Tamper8EventCallback(hrtc); #else /* Tamper8 secure callback */ HAL_RTCEx_Tamper8EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper1 status */ if ((tmp & RTC_INT_TAMPER_1) == RTC_INT_TAMPER_1) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 1 Event registered secure Callback */ hrtc->InternalTamper1EventCallback(hrtc); #else /* Internal Tamper1 secure callback */ HAL_RTCEx_InternalTamper1EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper2 status */ if ((tmp & RTC_INT_TAMPER_2) == RTC_INT_TAMPER_2) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 2 Event registered secure Callback */ hrtc->InternalTamper2EventCallback(hrtc); #else /* Internal Tamper2 secure callback */ HAL_RTCEx_InternalTamper2EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper3 status */ if ((tmp & RTC_INT_TAMPER_3) == RTC_INT_TAMPER_3) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 3 Event registered secure Callback */ hrtc->InternalTamper3EventCallback(hrtc); #else /* Internal Tamper3 secure callback */ HAL_RTCEx_InternalTamper3EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper5 status */ if ((tmp & RTC_INT_TAMPER_5) == RTC_INT_TAMPER_5) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 5 Event registered secure Callback */ hrtc->InternalTamper5EventCallback(hrtc); #else /* Internal Tamper5 secure callback */ HAL_RTCEx_InternalTamper5EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper6 status */ if ((tmp & RTC_INT_TAMPER_6) == RTC_INT_TAMPER_6) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 6 Event registered secure Callback */ hrtc->InternalTamper6EventCallback(hrtc); #else /* Internal Tamper6 secure callback */ HAL_RTCEx_InternalTamper6EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper7 status */ if ((tmp & RTC_INT_TAMPER_7) == RTC_INT_TAMPER_7) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 7 Event registered secure Callback */ hrtc->InternalTamper7EventCallback(hrtc); #else /* Internal Tamper7 secure callback */ HAL_RTCEx_InternalTamper7EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper8 status */ if ((tmp & RTC_INT_TAMPER_8) == RTC_INT_TAMPER_8) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 8 Event registered secure Callback */ hrtc->InternalTamper8EventCallback(hrtc); #else /* Internal Tamper8 secure callback */ HAL_RTCEx_InternalTamper8EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper9 status */ if ((tmp & RTC_INT_TAMPER_9) == RTC_INT_TAMPER_9) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 9 Event registered secure Callback */ hrtc->InternalTamper9EventCallback(hrtc); #else /* Internal Tamper9 secure callback */ HAL_RTCEx_InternalTamper9EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper11 status */ if ((tmp & RTC_INT_TAMPER_11) == RTC_INT_TAMPER_11) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 11 Event registered secure Callback */ hrtc->InternalTamper11EventCallback(hrtc); #else /* Internal Tamper11 secure callback */ HAL_RTCEx_InternalTamper11EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ } /* Check Internal Tamper12 status */ if ((tmp & RTC_INT_TAMPER_12) == RTC_INT_TAMPER_12) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 12 Event registered secure Callback */ hrtc->InternalTamper12EventCallback(hrtc); #else /* Internal Tamper 12 secure callback */ HAL_RTCEx_InternalTamper12EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ } /* Check Internal Tamper13 status */ if ((tmp & RTC_INT_TAMPER_13) == RTC_INT_TAMPER_13) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 13 Event registered secure Callback */ hrtc->InternalTamper13EventCallback(hrtc); #else /* Internal Tamper 13 secure callback */ HAL_RTCEx_InternalTamper13EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ } } #else /** * @brief Handle Tamper non-secure interrupt request. * @param hrtc RTC handle * @retval None */ void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc) { /* Get interrupt status */ uint32_t tmp = READ_REG(TAMP->MISR); /* Immediately clear flags */ WRITE_REG(TAMP->SCR, tmp); /* Check Tamper1 status */ if ((tmp & RTC_TAMPER_1) == RTC_TAMPER_1) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 1 Event registered Callback */ hrtc->Tamper1EventCallback(hrtc); #else /* Tamper1 callback */ HAL_RTCEx_Tamper1EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Tamper2 status */ if ((tmp & RTC_TAMPER_2) == RTC_TAMPER_2) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 2 Event registered Callback */ hrtc->Tamper2EventCallback(hrtc); #else /* Tamper2 callback */ HAL_RTCEx_Tamper2EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Tamper3 status */ if ((tmp & RTC_TAMPER_3) == RTC_TAMPER_3) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 3 Event registered Callback */ hrtc->Tamper3EventCallback(hrtc); #else /* Tamper3 callback */ HAL_RTCEx_Tamper3EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Tamper4 status */ if ((tmp & RTC_TAMPER_4) == RTC_TAMPER_4) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 4 Event registered Callback */ hrtc->Tamper4EventCallback(hrtc); #else /* Tamper4 callback */ HAL_RTCEx_Tamper4EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Tamper5 status */ if ((tmp & RTC_TAMPER_5) == RTC_TAMPER_5) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 5 Event registered Callback */ hrtc->Tamper5EventCallback(hrtc); #else /* Tamper5 callback */ HAL_RTCEx_Tamper5EventCallback(hrtc); #endif /* (USE_HAL_RTC_REGISTER_CALLBACKS == 1) */ } /* Check Tamper6 status */ if ((tmp & RTC_TAMPER_6) == RTC_TAMPER_6) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 6 Event registered Callback */ hrtc->Tamper6EventCallback(hrtc); #else /* Tamper6 callback */ HAL_RTCEx_Tamper6EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Tamper7 status */ if ((tmp & RTC_TAMPER_7) == RTC_TAMPER_7) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 7 Event registered Callback */ hrtc->Tamper7EventCallback(hrtc); #else /* Tamper7 callback */ HAL_RTCEx_Tamper7EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Tamper8 status */ if ((tmp & RTC_TAMPER_8) == RTC_TAMPER_8) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Tamper 8 Event registered Callback */ hrtc->Tamper8EventCallback(hrtc); #else /* Tamper8 callback */ HAL_RTCEx_Tamper8EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper1 status */ if ((tmp & RTC_INT_TAMPER_1) == RTC_INT_TAMPER_1) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 1 Event registered Callback */ hrtc->InternalTamper1EventCallback(hrtc); #else /* Internal Tamper1 callback */ HAL_RTCEx_InternalTamper1EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper2 status */ if ((tmp & RTC_INT_TAMPER_2) == RTC_INT_TAMPER_2) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 2 Event registered Callback */ hrtc->InternalTamper2EventCallback(hrtc); #else /* Internal Tamper2 callback */ HAL_RTCEx_InternalTamper2EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper3 status */ if ((tmp & RTC_INT_TAMPER_3) == RTC_INT_TAMPER_3) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 3 Event registered Callback */ hrtc->InternalTamper3EventCallback(hrtc); #else /* Internal Tamper3 callback */ HAL_RTCEx_InternalTamper3EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper5 status */ if ((tmp & RTC_INT_TAMPER_5) == RTC_INT_TAMPER_5) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 5 Event registered Callback */ hrtc->InternalTamper5EventCallback(hrtc); #else /* Internal Tamper5 callback */ HAL_RTCEx_InternalTamper5EventCallback(hrtc); #endif /* (USE_HAL_RTC_REGISTER_CALLBACKS == 1) */ } /* Check Internal Tamper6 status */ if ((tmp & RTC_INT_TAMPER_6) == RTC_INT_TAMPER_6) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 6 Event registered Callback */ hrtc->InternalTamper6EventCallback(hrtc); #else /* Internal Tamper6 callback */ HAL_RTCEx_InternalTamper6EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper7 status */ if ((tmp & RTC_INT_TAMPER_7) == RTC_INT_TAMPER_7) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 7 Event registered Callback */ hrtc->InternalTamper7EventCallback(hrtc); #else /* Internal Tamper7 callback */ HAL_RTCEx_InternalTamper7EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper8 status */ if ((tmp & RTC_INT_TAMPER_8) == RTC_INT_TAMPER_8) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 8 Event registered Callback */ hrtc->InternalTamper8EventCallback(hrtc); #else /* Internal Tamper8 callback */ HAL_RTCEx_InternalTamper8EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper9 status */ if ((tmp & RTC_INT_TAMPER_9) == RTC_INT_TAMPER_9) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 9 Event registered Callback */ hrtc->InternalTamper9EventCallback(hrtc); #else /* Internal Tamper9 callback */ HAL_RTCEx_InternalTamper9EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper11 status */ if ((tmp & RTC_INT_TAMPER_11) == RTC_INT_TAMPER_11) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 11 Event registered Callback */ hrtc->InternalTamper11EventCallback(hrtc); #else /* Internal Tamper11 callback */ HAL_RTCEx_InternalTamper11EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper12 status */ if ((tmp & RTC_INT_TAMPER_12) == RTC_INT_TAMPER_12) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 12 Event registered Callback */ hrtc->InternalTamper12EventCallback(hrtc); #else /* Internal Tamper12 callback */ HAL_RTCEx_InternalTamper12EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } /* Check Internal Tamper13 status */ if ((tmp & RTC_INT_TAMPER_13) == RTC_INT_TAMPER_13) { #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) /* Call Internal Tamper 13 Event registered Callback */ hrtc->InternalTamper13EventCallback(hrtc); #else /* Internal Tamper13 callback */ HAL_RTCEx_InternalTamper13EventCallback(hrtc); #endif /* USE_HAL_RTC_REGISTER_CALLBACKS == 1 */ } } #endif /* defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ /** * @brief Tamper 1 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file */ } /** * @brief Tamper 2 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_Tamper2EventCallback could be implemented in the user file */ } /** * @brief Tamper 3 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_Tamper3EventCallback could be implemented in the user file */ } /** * @brief Tamper 4 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_Tamper4EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_Tamper4EventCallback could be implemented in the user file */ } /** * @brief Tamper 5 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_Tamper5EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_Tamper5EventCallback could be implemented in the user file */ } /** * @brief Tamper 6 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_Tamper6EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_Tamper6EventCallback could be implemented in the user file */ } /** * @brief Tamper 7 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_Tamper7EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_Tamper7EventCallback could be implemented in the user file */ } /** * @brief Tamper 8 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_Tamper8EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_Tamper8EventCallback could be implemented in the user file */ } /** * @brief Internal Tamper 1 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_InternalTamper1EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_InternalTamper1EventCallback could be implemented in the user file */ } /** * @brief Internal Tamper 2 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_InternalTamper2EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_InternalTamper2EventCallback could be implemented in the user file */ } /** * @brief Internal Tamper 3 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_InternalTamper3EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_InternalTamper3EventCallback could be implemented in the user file */ } /** * @brief Internal Tamper 5 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_InternalTamper5EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_InternalTamper5EventCallback could be implemented in the user file */ } /** * @brief Internal Tamper 6 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_InternalTamper6EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_InternalTamper6EventCallback could be implemented in the user file */ } /** * @brief Internal Tamper 7 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_InternalTamper7EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_InternalTamper7EventCallback could be implemented in the user file */ } /** * @brief Internal Tamper 8 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_InternalTamper8EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_InternalTamper8EventCallback could be implemented in the user file */ } /** * @brief Internal Tamper 9 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_InternalTamper9EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_InternalTamper9EventCallback could be implemented in the user file */ } /** * @brief Internal Tamper 11 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_InternalTamper11EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_InternalTamper11EventCallback could be implemented in the user file */ } /** * @brief Internal Tamper 12 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_InternalTamper12EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_InternalTamper12EventCallback could be implemented in the user file */ } /** * @brief Internal Tamper 13 callback. * @param hrtc RTC handle * @retval None */ __weak void HAL_RTCEx_InternalTamper13EventCallback(RTC_HandleTypeDef *hrtc) { /* Prevent unused argument(s) compilation warning */ UNUSED(hrtc); /* NOTE : This function should not be modified, when the callback is needed, the HAL_RTCEx_InternalTamper13EventCallback could be implemented in the user file */ } /** * @} */ /** @addtogroup RTCEx_Exported_Functions_Group6 * @brief Extended RTC Backup register functions * @verbatim =============================================================================== ##### Extended RTC Backup register functions ##### =============================================================================== [..] (+) Before calling any tamper or internal tamper function, you have to call first HAL_RTC_Init() function. (+) In that ine you can select to output tamper event on RTC pin. [..] This subsection provides functions allowing to (+) Write a data in a specified RTC Backup data register (+) Read a data in a specified RTC Backup data register @endverbatim * @{ */ /** * @brief Write a data in a specified RTC Backup data register. * @param hrtc RTC handle * @param BackupRegister RTC Backup data Register number. * This parameter can be RTC_BKP_DRx where x can be from 0 to RTC_BACKUP_NB * @param Data Data to be written in the specified Backup data register. * @retval None */ void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data) { uint32_t tmp; UNUSED(hrtc); /* Check the parameters */ assert_param(IS_RTC_BKP(BackupRegister)); tmp = (uint32_t) &(TAMP->BKP0R); tmp += (BackupRegister * 4U); /* Write the specified register */ *(__IO uint32_t *)tmp = (uint32_t)Data; } /** * @brief Reads data from the specified RTC Backup data Register. * @param hrtc RTC handle * @param BackupRegister RTC Backup data Register number. * This parameter can be RTC_BKP_DRx where x can be from 0 to RTC_BACKUP_NB * @retval Read value */ uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister) { uint32_t tmp; UNUSED(hrtc); /* Check the parameters */ assert_param(IS_RTC_BKP(BackupRegister)); tmp = (uint32_t) &(TAMP->BKP0R); tmp += (BackupRegister * 4U); /* Read the specified register */ return (*(__IO uint32_t *)tmp); } /** * @brief Reset the RTC Backup data Register and the device secrets. * @param hrtc RTC handle * @retval None */ void HAL_RTCEx_BKUPErase(RTC_HandleTypeDef *hrtc) { UNUSED(hrtc); WRITE_REG(TAMP->CR2, TAMP_CR2_BKERASE); } /** * @brief Block the access to the RTC Backup data Register and the device secrets. * @param hrtc RTC handle * @retval None */ void HAL_RTCEx_BKUPBlock_Enable(RTC_HandleTypeDef *hrtc) { UNUSED(hrtc); WRITE_REG(TAMP->CR2, TAMP_CR2_BKBLOCK); } /** * @brief Disable the Block to the access to the RTC Backup data Register and the device secrets. * @param hrtc RTC handle * @retval None */ void HAL_RTCEx_BKUPBlock_Disable(RTC_HandleTypeDef *hrtc) { UNUSED(hrtc); CLEAR_BIT(TAMP->CR2, TAMP_CR2_BKBLOCK); } /** * @brief Enable and Disable the erase of the configurable Device Secerts * @note This API must be called before enabling the Tamper. * @param hrtc RTC handle * @param SecretDeviceConf Specifies the configuration of the Secrets Devices * This parameter can be one of the following values: * @arg TAMP_SECRETDEVICE_ERASE_ENABLE: Configurable device secrets are is included in the device secrets * protected by TAMP peripheral. * @arg TAMP_SECRETDEVICE_ERASE_DISABLE: Configurable device secrets are not included in the device * secrets protected by TAMP peripheral. * @retval None */ void HAL_RTCEx_Erase_SecretDev_Conf(RTC_HandleTypeDef *hrtc, uint32_t SecretDeviceConf) { UNUSED(hrtc); if (SecretDeviceConf != TAMP_SECRETDEVICE_ERASE_ENABLE) { CLEAR_BIT(TAMP->ERCFGR, TAMP_ERCFGR0); } else { SET_BIT(TAMP->ERCFGR, TAMP_ERCFGR0); } } /** * @brief Get the erase configuration of the Device Secerts * @retval RTCEx_TAMP_Secret_Device_Conf_Erase */ uint32_t HAL_RTCEx_Get_Erase_SecretDev_Conf(void) { if (READ_BIT(TAMP->ERCFGR, TAMP_ERCFGR0) == TAMP_ERCFGR0) { return TAMP_SECRETDEVICE_ERASE_ENABLE; } else { return TAMP_SECRETDEVICE_ERASE_DISABLE; } } /** * @} */ /** @addtogroup RTCEx_Exported_Functions_Group7 * @brief Extended RTC security functions * @verbatim =============================================================================== ##### Extended RTC security functions ##### =============================================================================== [..] (+) Before calling security function, you have to call first HAL_RTC_Init() function. @endverbatim * @{ */ /** * @brief Get the security level of the RTC. * To set the secure level please call HAL_RTCEx_SecureModeSet. * @param hrtc RTC handle * @param secureState Secure state * @retval HAL_StatusTypeDef */ HAL_StatusTypeDef HAL_RTCEx_SecureModeGet(RTC_HandleTypeDef *hrtc, RTC_SecureStateTypeDef *secureState) { UNUSED(hrtc); /* Read registers */ uint32_t rtc_seccfgr = READ_REG(RTC->SECCFGR); uint32_t tamp_seccfgr = READ_REG(TAMP->SECCFGR); /* RTC */ secureState->rtcSecureFull = READ_BIT(rtc_seccfgr, RTC_SECCFGR_SEC); /* Warning, rtcNonSecureFeatures is only relevant if secureState->rtcSecureFull == RTC_SECURE_FULL_NO */ secureState->rtcNonSecureFeatures = READ_BIT(rtc_seccfgr, RTC_NONSECURE_FEATURE_ALL); /* TAMP */ secureState->tampSecureFull = READ_BIT(tamp_seccfgr, TAMP_SECCFGR_TAMPSEC); /* Monotonic Counter */ secureState->MonotonicCounterSecure = READ_BIT(tamp_seccfgr, TAMP_SECCFGR_CNT1SEC); /* Backup register start zones Warning : Backup register start zones are shared with privilege configuration */ secureState->backupRegisterStartZone2 = READ_BIT(tamp_seccfgr, TAMP_SECCFGR_BKPRWSEC) >> TAMP_SECCFGR_BKPRWSEC_Pos; secureState->backupRegisterStartZone3 = READ_BIT(tamp_seccfgr, TAMP_SECCFGR_BKPWSEC) >> TAMP_SECCFGR_BKPWSEC_Pos; return HAL_OK; } #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) /** * @brief Set the security level of the RTC/TAMP/Backup registers. * To get the current security level call HAL_RTCEx_SecureModeGet. * @param hrtc RTC handle * @param secureState Secure state * @retval HAL_StatusTypeDef */ HAL_StatusTypeDef HAL_RTCEx_SecureModeSet(RTC_HandleTypeDef *hrtc, RTC_SecureStateTypeDef *secureState) { UNUSED(hrtc); assert_param(IS_RTC_SECURE_FULL(secureState->rtcSecureFull)); assert_param(IS_RTC_NONSECURE_FEATURES(secureState->rtcNonSecureFeatures)); assert_param(IS_TAMP_SECURE_FULL(secureState->tampSecureFull)); assert_param(IS_RTC_BKP(secureState->backupRegisterStartZone2)); assert_param(IS_RTC_BKP(secureState->backupRegisterStartZone3)); assert_param(IS_TAMP_MONOTONIC_CNT_SECURE(secureState->MonotonicCounterSecure)); /* RTC, rtcNonSecureFeatures is only relevant if secureState->rtcSecureFull == RTC_SECURE_FULL_NO */ WRITE_REG(RTC->SECCFGR, secureState->rtcSecureFull | secureState->rtcNonSecureFeatures); /* Tamper + Backup register + Monotonic counter Warning : Backup register start zone are Shared with privilege configuration */ WRITE_REG(TAMP->SECCFGR, secureState->tampSecureFull | secureState->MonotonicCounterSecure | (TAMP_SECCFGR_BKPRWSEC & (secureState->backupRegisterStartZone2 << TAMP_SECCFGR_BKPRWSEC_Pos)) | (TAMP_SECCFGR_BKPWSEC & (secureState->backupRegisterStartZone3 << TAMP_SECCFGR_BKPWSEC_Pos))); return HAL_OK; } #endif /* #if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U) */ /** * @} */ /** @addtogroup RTCEx_Exported_Functions_Group8 * @brief Extended RTC privilege functions * @verbatim =============================================================================== ##### Extended RTC privilege functions ##### =============================================================================== [..] (+) Before calling privilege function, you have to call first HAL_RTC_Init() function. @endverbatim * @{ */ /** * @brief Set the privilege level of the RTC/TAMP registers. * To get the current privilege level call HAL_RTCEx_PrivilegeModeGet. * @param hrtc RTC handle * @param privilegeState Privilege state * @retval HAL_StatusTypeDef */ HAL_StatusTypeDef HAL_RTCEx_PrivilegeModeSet(RTC_HandleTypeDef *hrtc, RTC_PrivilegeStateTypeDef *privilegeState) { UNUSED(hrtc); assert_param(IS_RTC_PRIVILEGE_FULL(privilegeState->rtcPrivilegeFull)); assert_param(IS_RTC_PRIVILEGE_FEATURES(privilegeState->rtcPrivilegeFeatures)); assert_param(IS_TAMP_PRIVILEGE_FULL(privilegeState->tampPrivilegeFull)); assert_param(IS_TAMP_MONOTONIC_CNT_PRIVILEGE(privilegeState->MonotonicCounterPrivilege)); assert_param(IS_RTC_PRIVILEGE_BKUP_ZONE(privilegeState->backupRegisterPrivZone)); assert_param(IS_RTC_BKP(privilegeState->backupRegisterStartZone2)); assert_param(IS_RTC_BKP(privilegeState->backupRegisterStartZone3)); /* RTC privilege configuration */ WRITE_REG(RTC->PRIVCFGR, privilegeState->rtcPrivilegeFull | privilegeState->rtcPrivilegeFeatures); /* TAMP, Monotonic counter and Backup registers privilege configuration Warning : privilegeState->backupRegisterPrivZone is only writable in secure mode or if trustzone is disabled. In non secure mode, a notification is generated through a flag/interrupt in the TZIC (TrustZone interrupt controller). The bits are not written. */ WRITE_REG(TAMP->PRIVCFGR, privilegeState->tampPrivilegeFull | privilegeState->backupRegisterPrivZone | \ privilegeState->MonotonicCounterPrivilege); /* Backup register start zone Warning : This parameter is only writable in secure mode or if trustzone is disabled. In non secure mode, a notification is generated through a flag/interrupt in the TZIC (TrustZone interrupt controller). The bits are not written. Warning : Backup register start zones are shared with secure configuration */ MODIFY_REG(TAMP->SECCFGR, (TAMP_SECCFGR_BKPRWSEC | TAMP_SECCFGR_BKPWSEC), ((privilegeState->backupRegisterStartZone2 << TAMP_SECCFGR_BKPRWSEC_Pos) | \ (privilegeState->backupRegisterStartZone3 << TAMP_SECCFGR_BKPWSEC_Pos))); return HAL_OK; } /** * @brief Get the privilege level of the RTC. * To set the privilege level please call HAL_RTCEx_PrivilegeModeSet. * @param hrtc RTC handle * @param privilegeState Privilege state * @retval HAL_StatusTypeDef */ HAL_StatusTypeDef HAL_RTCEx_PrivilegeModeGet(RTC_HandleTypeDef *hrtc, RTC_PrivilegeStateTypeDef *privilegeState) { /* Read registers */ uint32_t rtc_privcfgr = READ_REG(RTC->PRIVCFGR); uint32_t tamp_privcfgr = READ_REG(TAMP->PRIVCFGR); uint32_t tamp_seccfgr = READ_REG(TAMP->SECCFGR); UNUSED(hrtc); /* RTC privilege configuration */ privilegeState->rtcPrivilegeFull = READ_BIT(rtc_privcfgr, RTC_PRIVCFGR_PRIV); /* Warning, rtcPrivilegeFeatures is only relevant if privilegeState->rtcPrivilegeFull == RTC_PRIVILEGE_FULL_NO */ privilegeState->rtcPrivilegeFeatures = READ_BIT(rtc_privcfgr, RTC_PRIVILEGE_FEATURE_ALL); /* TAMP and Backup registers privilege configuration */ privilegeState->tampPrivilegeFull = READ_BIT(tamp_privcfgr, TAMP_PRIVCFGR_TAMPPRIV); /* Monotonic registers privilege configuration */ privilegeState->MonotonicCounterPrivilege = READ_BIT(tamp_privcfgr, TAMP_PRIVCFGR_CNT1PRIV); /* Backup registers Zones */ privilegeState->backupRegisterPrivZone = READ_BIT(tamp_privcfgr, (TAMP_PRIVCFGR_BKPWPRIV | TAMP_PRIVCFGR_BKPRWPRIV)); /* Backup register start zones Warning : Shared with secure configuration */ privilegeState->backupRegisterStartZone2 = READ_BIT(tamp_seccfgr, TAMP_SECCFGR_BKPRWSEC) >> TAMP_SECCFGR_BKPRWSEC_Pos; privilegeState->backupRegisterStartZone3 = READ_BIT(tamp_seccfgr, TAMP_SECCFGR_BKPWSEC) >> TAMP_SECCFGR_BKPWSEC_Pos; return HAL_OK; } /** * @} */ /** * @} */ #endif /* HAL_RTC_MODULE_ENABLED */ /** * @} */ /** * @} */