//###########################################################################
//
// FILE:    F2837xD_input_xbar.h
//
// TITLE:   INPUT_XBAR Register Definitions.
//
//###########################################################################
// $TI Release: F2837xD Support Library v3.05.00.00 $
// $Release Date: Tue Jun 26 03:15:23 CDT 2018 $
// $Copyright:
// Copyright (C) 2013-2018 Texas Instruments Incorporated - http://www.ti.com/
//
// Redistribution and use in source and binary forms, with or without 
// modification, are permitted provided that the following conditions 
// are met:
// 
//   Redistributions of source code must retain the above copyright 
//   notice, this list of conditions and the following disclaimer.
// 
//   Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the 
//   documentation and/or other materials provided with the   
//   distribution.
// 
//   Neither the name of Texas Instruments Incorporated nor the names of
//   its contributors may be used to endorse or promote products derived
//   from this software without specific prior written permission.
// 
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// $
//###########################################################################

#ifndef __F2837xD_INPUT_XBAR_H__
#define __F2837xD_INPUT_XBAR_H__

#ifdef __cplusplus
extern "C" {
#endif


//---------------------------------------------------------------------------
// INPUT_XBAR Individual Register Bit Definitions:

struct INPUTSELECTLOCK_BITS {           // bits description
    Uint16 INPUT1SELECT:1;              // 0 Lock bit for INPUT1SEL Register
    Uint16 INPUT2SELECT:1;              // 1 Lock bit for INPUT2SEL Register
    Uint16 INPUT3SELECT:1;              // 2 Lock bit for INPUT3SEL Register
    Uint16 INPUT4SELECT:1;              // 3 Lock bit for INPUT4SEL Register
    Uint16 INPUT5SELECT:1;              // 4 Lock bit for INPUT5SEL Register
    Uint16 INPUT6SELECT:1;              // 5 Lock bit for INPUT7SEL Register
    Uint16 INPUT7SELECT:1;              // 6 Lock bit for INPUT8SEL Register
    Uint16 INPUT8SELECT:1;              // 7 Lock bit for INPUT9SEL Register
    Uint16 INPUT9SELECT:1;              // 8 Lock bit for INPUT10SEL Register
    Uint16 INPUT10SELECT:1;             // 9 Lock bit for INPUT11SEL Register
    Uint16 INPUT11SELECT:1;             // 10 Lock bit for INPUT11SEL Register
    Uint16 INPUT12SELECT:1;             // 11 Lock bit for INPUT12SEL Register
    Uint16 INPUT13SELECT:1;             // 12 Lock bit for INPUT13SEL Register
    Uint16 INPUT14SELECT:1;             // 13 Lock bit for INPUT14SEL Register
    Uint16 INPUT15SELECT:1;             // 14 Lock bit for INPUT15SEL Register
    Uint16 INPUT16SELECT:1;             // 15 Lock bit for INPUT16SEL Register
    Uint16 rsvd1:16;                    // 31:16 Reserved
};

union INPUTSELECTLOCK_REG {
    Uint32  all;
    struct  INPUTSELECTLOCK_BITS  bit;
};

struct INPUT_XBAR_REGS {
    Uint16                                   INPUT1SELECT;                 // INPUT1 Input Select Register (GPIO0 to x)
    Uint16                                   INPUT2SELECT;                 // INPUT2 Input Select Register (GPIO0 to x)
    Uint16                                   INPUT3SELECT;                 // INPUT3 Input Select Register (GPIO0 to x)
    Uint16                                   INPUT4SELECT;                 // INPUT4 Input Select Register (GPIO0 to x)
    Uint16                                   INPUT5SELECT;                 // INPUT5 Input Select Register (GPIO0 to x)
    Uint16                                   INPUT6SELECT;                 // INPUT6 Input Select Register (GPIO0 to x)
    Uint16                                   INPUT7SELECT;                 // INPUT7 Input Select Register (GPIO0 to x)
    Uint16                                   INPUT8SELECT;                 // INPUT8 Input Select Register (GPIO0 to x)
    Uint16                                   INPUT9SELECT;                 // INPUT9 Input Select Register (GPIO0 to x)
    Uint16                                   INPUT10SELECT;                // INPUT10 Input Select Register (GPIO0 to x)
    Uint16                                   INPUT11SELECT;                // INPUT11 Input Select Register (GPIO0 to x)
    Uint16                                   INPUT12SELECT;                // INPUT12 Input Select Register (GPIO0 to x)
    Uint16                                   INPUT13SELECT;                // INPUT13 Input Select Register (GPIO0 to x)
    Uint16                                   INPUT14SELECT;                // INPUT14 Input Select Register (GPIO0 to x)
    Uint16                                   rsvd1[16];                    // Reserved
    union   INPUTSELECTLOCK_REG              INPUTSELECTLOCK;              // Input Select Lock Register
};

//---------------------------------------------------------------------------
// INPUT_XBAR External References & Function Declarations:
//
#ifdef CPU1
extern volatile struct INPUT_XBAR_REGS InputXbarRegs;
#endif
#ifdef __cplusplus
}
#endif                                  /* extern "C" */

#endif

//===========================================================================
// End of file.
//===========================================================================