Skip to content

R
rt-thread

u010088926 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 1
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 91577f18 编写于 作者: B bernard.xiong@gmail.com
浏览文件
操作

Add fm3 porting. 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1297 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 cabc797a
隐藏空白更改
内联 并排
Showing with 16244 addition and 0 deletion
bsp/fm3/CMSIS/core_cm3.c 0 → 100644
浏览文件 @ 91577f18
/**************************************************************************//**
* @file core_cm3.c
* @brief CMSIS Cortex-M3 Core Peripheral Access Layer Source File
* @version V1.40
* @date 18. February 2010
*
* @note
* Copyright (C) 2009-2010 ARM Limited. All rights reserved.
*
* @par
* ARM Limited (ARM) is supplying this software for use with Cortex-M
* processor based microcontrollers. This file can be freely distributed
* within development tools that are supporting such ARM based processors.
*
* @par
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
* ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
******************************************************************************/
#include <stdint.h>
/* define compiler specific symbols */
#if defined ( __CC_ARM )
#define __ASM __asm /*!< asm keyword for ARM Compiler */
#define __INLINE __inline /*!< inline keyword for ARM Compiler */
#elif defined ( __ICCARM__ )
#define __ASM __asm /*!< asm keyword for IAR Compiler */
#define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
#elif defined ( __GNUC__ )
#define __ASM __asm /*!< asm keyword for GNU Compiler */
#define __INLINE inline /*!< inline keyword for GNU Compiler */
#elif defined ( __TASKING__ )
#define __ASM __asm /*!< asm keyword for TASKING Compiler */
#define __INLINE inline /*!< inline keyword for TASKING Compiler */
#endif
/* ########################## Core Instruction Access ######################### */
#if defined ( __CC_ARM ) /*------------------ RealView Compiler ----------------*/
/**
* @brief Reverse byte order (16 bit)
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in unsigned short value
*/
#if (__ARMCC_VERSION < 400677)
__ASM uint32_t __REV16(uint16_t value)
{
rev16 r0, r0
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Reverse byte order in signed short value with sign extension to integer
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in signed short value with sign extension to integer
*/
#if (__ARMCC_VERSION < 400677)
__ASM int32_t __REVSH(int16_t value)
{
revsh r0, r0
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Remove the exclusive lock created by ldrex
*
* Removes the exclusive lock which is created by ldrex.
*/
#if (__ARMCC_VERSION < 400000)
__ASM void __CLREX(void)
{
clrex
}
#endif /* __ARMCC_VERSION */
#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
/* obsolete */
#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
/* obsolete */
#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
/* obsolete */
#endif
/* ########################### Core Function Access ########################### */
#if defined ( __CC_ARM ) /*------------------ RealView Compiler ----------------*/
/**
* @brief Return the Control Register value
*
* @return Control value
*
* Return the content of the control register
*/
#if (__ARMCC_VERSION < 400000)
__ASM uint32_t __get_CONTROL(void)
{
mrs r0, control
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Set the Control Register value
*
* @param control Control value
*
* Set the control register
*/
#if (__ARMCC_VERSION < 400000)
__ASM void __set_CONTROL(uint32_t control)
{
msr control, r0
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Get IPSR Register value
*
* @return uint32_t IPSR value
*
* return the content of the IPSR register
*/
#if (__ARMCC_VERSION < 400000)
__ASM uint32_t __get_IPSR(void)
{
mrs r0, ipsr
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Get APSR Register value
*
* @return uint32_t APSR value
*
* return the content of the APSR register
*/
#if (__ARMCC_VERSION < 400000)
__ASM uint32_t __get_APSR(void)
{
mrs r0, apsr
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Get xPSR Register value
*
* @return uint32_t xPSR value
*
* return the content of the xPSR register
*/
#if (__ARMCC_VERSION < 400000)
__ASM uint32_t __get_xPSR(void)
{
mrs r0, xpsr
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Return the Process Stack Pointer
*
* @return ProcessStackPointer
*
* Return the actual process stack pointer
*/
#if (__ARMCC_VERSION < 400000)
__ASM uint32_t __get_PSP(void)
{
mrs r0, psp
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Set the Process Stack Pointer
*
* @param topOfProcStack Process Stack Pointer
*
* Assign the value ProcessStackPointer to the MSP
* (process stack pointer) Cortex processor register
*/
#if (__ARMCC_VERSION < 400000)
__ASM void __set_PSP(uint32_t topOfProcStack)
{
msr psp, r0
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Return the Main Stack Pointer
*
* @return Main Stack Pointer
*
* Return the current value of the MSP (main stack pointer)
* Cortex processor register
*/
#if (__ARMCC_VERSION < 400000)
__ASM uint32_t __get_MSP(void)
{
mrs r0, msp
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Set the Main Stack Pointer
*
* @param topOfMainStack Main Stack Pointer
*
* Assign the value mainStackPointer to the MSP
* (main stack pointer) Cortex processor register
*/
#if (__ARMCC_VERSION < 400000)
__ASM void __set_MSP(uint32_t mainStackPointer)
{
msr msp, r0
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Return the Base Priority value
*
* @return BasePriority
*
* Return the content of the base priority register
*/
#if (__ARMCC_VERSION < 400000)
__ASM uint32_t __get_BASEPRI(void)
{
mrs r0, basepri
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Set the Base Priority value
*
* @param basePri BasePriority
*
* Set the base priority register
*/
#if (__ARMCC_VERSION < 400000)
__ASM void __set_BASEPRI(uint32_t basePri)
{
msr basepri, r0
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Return the Priority Mask value
*
* @return PriMask
*
* Return state of the priority mask bit from the priority mask register
*/
#if (__ARMCC_VERSION < 400000)
__ASM uint32_t __get_PRIMASK(void)
{
mrs r0, primask
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Set the Priority Mask value
*
* @param priMask PriMask
*
* Set the priority mask bit in the priority mask register
*/
#if (__ARMCC_VERSION < 400000)
__ASM void __set_PRIMASK(uint32_t priMask)
{
msr primask, r0
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Return the Fault Mask value
*
* @return FaultMask
*
* Return the content of the fault mask register
*/
#if (__ARMCC_VERSION < 400000)
__ASM uint32_t __get_FAULTMASK(void)
{
mrs r0, faultmask
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Set the Fault Mask value
*
* @param faultMask faultMask value
*
* Set the fault mask register
*/
#if (__ARMCC_VERSION < 400000)
__ASM void __set_FAULTMASK(uint32_t faultMask)
{
msr faultmask, r0
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Return the FPSCR value
*
* @return FloatingPointStatusControlRegister
*
* Return the content of the FPSCR register
*/
/**
* @brief Set the FPSCR value
*
* @param fpscr FloatingPointStatusControlRegister
*
* Set the FPSCR register
*/
#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
/* obsolete */
#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
/* obsolete */
#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
/* obsolete */
#endif
bsp/fm3/CMSIS/core_cm3.h 0 → 100644
浏览文件 @ 91577f18
/**************************************************************************//**
* @file core_cm3.h
* @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
* @version V1.40
* @date 16. February 2010
*
* @note
* Copyright (C) 2009-2010 ARM Limited. All rights reserved.
*
* @par
* ARM Limited (ARM) is supplying this software for use with Cortex-M
* processor based microcontrollers. This file can be freely distributed
* within development tools that are supporting such ARM based processors.
*
* @par
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
* ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
******************************************************************************/
#ifndef __CORE_CM3_H__
#define __CORE_CM3_H__
/** @addtogroup CMSIS_CM3_core_LintCinfiguration CMSIS CM3 Core Lint Configuration
*
* List of Lint messages which will be suppressed and not shown:
* - not yet checked
* .
* Note: To re-enable a Message, insert a space before 'lint' *
*
*/
/** @addtogroup CMSIS_CM3_core_definitions CM3 Core Definitions
This file defines all structures and symbols for CMSIS core:
- CMSIS version number
- Cortex-M core registers and bitfields
- Cortex-M core peripheral base address
@{
*/
#ifdef __cplusplus
extern "C" {
#endif
#define __CM3_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */
#define __CM3_CMSIS_VERSION_SUB (0x40) /*!< [15:0] CMSIS HAL sub version */
#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
#define __CORTEX_M (0x03) /*!< Cortex core */
#ifndef __NVIC_PRIO_BITS
#define __NVIC_PRIO_BITS 4 /*!< standard definition for NVIC Priority Bits */
#endif
#include <stdint.h> /* Include standard types */
/**
* IO definitions
*
* define access restrictions to peripheral registers
*/
#ifdef __cplusplus
#define __I volatile /*!< defines 'read only' permissions */
#else
#define __I volatile const /*!< defines 'read only' permissions */
#endif
#define __O volatile /*!< defines 'write only' permissions */
#define __IO volatile /*!< defines 'read / write' permissions */
/*******************************************************************************
* Register Abstraction
******************************************************************************/
/** @addtogroup CMSIS_CM3_core_register CMSIS CM3 Core Register
@{
*/
/** @addtogroup CMSIS_ARM_CORE CMSIS ARM Core
memory mapped structure for Nested Vectored Interrupt Controller (NVIC)
@{
*/
typedef union
{
struct
{
#if (__CORTEX_M != 0x04)
uint32_t _reserved0:27;
#else
uint32_t _reserved0:16;
uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
uint32_t _reserved1:7;
#endif
uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b;
uint32_t w;
} APSR_Type;
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 00..08 Exception number */
uint32_t _reserved0:23;
} b;
uint32_t w;
} IPSR_Type;
typedef union
{
struct
{
uint32_t ISR:9; /*!< bit: 00..08 Exception number */
#if (__CORTEX_M != 0x04)
uint32_t _reserved0:15;
#else
uint32_t _reserved0:7;
uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
uint32_t _reserved1:4;
#endif
uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
uint32_t C:1; /*!< bit: 29 Carry condition code flag */
uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
uint32_t N:1; /*!< bit: 31 Negative condition code flag */
} b;
uint32_t w;
} xPSR_Type;
typedef union
{
struct
{
uint32_t nPRIV:1; /*!< bit: 00 Execution privilege in Thread mode */
uint32_t SPSEL:1; /*!< bit: 01 Stack to be used */
uint32_t FPCA:1; /*!< bit: 02 FP extension active flag */
uint32_t _reserved0:29;
} b;
uint32_t w;
} CONTROL_Type;
/*@}*/ /* end of group CMSIS_ARM_CORE */
/** @addtogroup CMSIS_CM3_NVIC CMSIS CM3 NVIC
memory mapped structure for Nested Vectored Interrupt Controller (NVIC)
@{
*/
typedef struct
{
__IO uint32_t ISER[8]; /*!< Offset: 0x000 Interrupt Set Enable Register */
uint32_t RESERVED0[24];
__IO uint32_t ICER[8]; /*!< Offset: 0x080 Interrupt Clear Enable Register */
uint32_t RSERVED1[24];
__IO uint32_t ISPR[8]; /*!< Offset: 0x100 Interrupt Set Pending Register */
uint32_t RESERVED2[24];
__IO uint32_t ICPR[8]; /*!< Offset: 0x180 Interrupt Clear Pending Register */
uint32_t RESERVED3[24];
__IO uint32_t IABR[8]; /*!< Offset: 0x200 Interrupt Active bit Register */
uint32_t RESERVED4[56];
__IO uint8_t IP[240]; /*!< Offset: 0x300 Interrupt Priority Register (8Bit wide) */
uint32_t RESERVED5[644];
__O uint32_t STIR; /*!< Offset: 0xE00 Software Trigger Interrupt Register */
} NVIC_Type;
/*@}*/ /* end of group CMSIS_CM3_NVIC */
/** @addtogroup CMSIS_CM3_SCB CMSIS CM3 SCB
memory mapped structure for System Control Block (SCB)
@{
*/
typedef struct
{
__I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */
__IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */
__IO uint32_t VTOR; /*!< Offset: 0x08 Vector Table Offset Register */
__IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */
__IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */
__IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */
__IO uint8_t SHP[12]; /*!< Offset: 0x18 System Handlers Priority Registers (4-7, 8-11, 12-15) */
__IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */
__IO uint32_t CFSR; /*!< Offset: 0x28 Configurable Fault Status Register */
__IO uint32_t HFSR; /*!< Offset: 0x2C Hard Fault Status Register */
__IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */
__IO uint32_t MMFAR; /*!< Offset: 0x34 Mem Manage Address Register */
__IO uint32_t BFAR; /*!< Offset: 0x38 Bus Fault Address Register */
__IO uint32_t AFSR; /*!< Offset: 0x3C Auxiliary Fault Status Register */
__I uint32_t PFR[2]; /*!< Offset: 0x40 Processor Feature Register */
__I uint32_t DFR; /*!< Offset: 0x48 Debug Feature Register */
__I uint32_t ADR; /*!< Offset: 0x4C Auxiliary Feature Register */
__I uint32_t MMFR[4]; /*!< Offset: 0x50 Memory Model Feature Register */
__I uint32_t ISAR[5]; /*!< Offset: 0x60 ISA Feature Register */
} SCB_Type;
/* SCB CPUID Register Definitions */
#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
/* SCB Interrupt Control State Register Definitions */
#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
#define SCB_ICSR_RETTOBASE_Msk (1ul << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
/* SCB Interrupt Control State Register Definitions */
#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
#define SCB_VTOR_TBLBASE_Msk (0x1FFul << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFul << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
/* SCB Application Interrupt and Reset Control Register Definitions */
#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
#define SCB_AIRCR_PRIGROUP_Msk (7ul << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
#define SCB_AIRCR_VECTRESET_Msk (1ul << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
/* SCB System Control Register Definitions */
#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
/* SCB Configuration Control Register Definitions */
#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
#define SCB_CCR_BFHFNMIGN_Msk (1ul << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
#define SCB_CCR_DIV_0_TRP_Msk (1ul << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
#define SCB_CCR_USERSETMPEND_Msk (1ul << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
#define SCB_CCR_NONBASETHRDENA_Msk (1ul << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
/* SCB System Handler Control and State Register Definitions */
#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
#define SCB_SHCSR_USGFAULTENA_Msk (1ul << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
#define SCB_SHCSR_BUSFAULTENA_Msk (1ul << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
#define SCB_SHCSR_MEMFAULTENA_Msk (1ul << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
#define SCB_SHCSR_BUSFAULTPENDED_Msk (1ul << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
#define SCB_SHCSR_MEMFAULTPENDED_Msk (1ul << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
#define SCB_SHCSR_USGFAULTPENDED_Msk (1ul << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
#define SCB_SHCSR_SYSTICKACT_Msk (1ul << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
#define SCB_SHCSR_PENDSVACT_Msk (1ul << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
#define SCB_SHCSR_MONITORACT_Msk (1ul << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
#define SCB_SHCSR_SVCALLACT_Msk (1ul << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
#define SCB_SHCSR_USGFAULTACT_Msk (1ul << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
#define SCB_SHCSR_BUSFAULTACT_Msk (1ul << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
#define SCB_SHCSR_MEMFAULTACT_Msk (1ul << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
/* SCB Configurable Fault Status Registers Definitions */
#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFul << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
#define SCB_CFSR_BUSFAULTSR_Msk (0xFFul << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
#define SCB_CFSR_MEMFAULTSR_Msk (0xFFul << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
/* SCB Hard Fault Status Registers Definitions */
#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
#define SCB_HFSR_DEBUGEVT_Msk (1ul << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
#define SCB_HFSR_FORCED_Msk (1ul << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
#define SCB_HFSR_VECTTBL_Msk (1ul << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
/* SCB Debug Fault Status Register Definitions */
#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
/*@}*/ /* end of group CMSIS_CM3_SCB */
/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick
memory mapped structure for SysTick
@{
*/
typedef struct
{
__IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */
__IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */
__IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */
__I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */
} SysTick_Type;
/* SysTick Control / Status Register Definitions */
#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
/* SysTick Reload Register Definitions */
#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
/* SysTick Current Register Definitions */
#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
/* SysTick Calibration Register Definitions */
#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
/*@}*/ /* end of group CMSIS_CM3_SysTick */
/** @addtogroup CMSIS_CM3_ITM CMSIS CM3 ITM
memory mapped structure for Instrumentation Trace Macrocell (ITM)
@{
*/
typedef struct
{
__O union
{
__O uint8_t u8; /*!< Offset: ITM Stimulus Port 8-bit */
__O uint16_t u16; /*!< Offset: ITM Stimulus Port 16-bit */
__O uint32_t u32; /*!< Offset: ITM Stimulus Port 32-bit */
} PORT [32]; /*!< Offset: 0x00 ITM Stimulus Port Registers */
uint32_t RESERVED0[864];
__IO uint32_t TER; /*!< Offset: ITM Trace Enable Register */
uint32_t RESERVED1[15];
__IO uint32_t TPR; /*!< Offset: ITM Trace Privilege Register */
uint32_t RESERVED2[15];
__IO uint32_t TCR; /*!< Offset: ITM Trace Control Register */
uint32_t RESERVED3[29];
__IO uint32_t IWR; /*!< Offset: ITM Integration Write Register */
__IO uint32_t IRR; /*!< Offset: ITM Integration Read Register */
__IO uint32_t IMCR; /*!< Offset: ITM Integration Mode Control Register */
uint32_t RESERVED4[43];
__IO uint32_t LAR; /*!< Offset: ITM Lock Access Register */
__IO uint32_t LSR; /*!< Offset: ITM Lock Status Register */
uint32_t RESERVED5[6];
__I uint32_t PID4; /*!< Offset: ITM Peripheral Identification Register #4 */
__I uint32_t PID5; /*!< Offset: ITM Peripheral Identification Register #5 */
__I uint32_t PID6; /*!< Offset: ITM Peripheral Identification Register #6 */
__I uint32_t PID7; /*!< Offset: ITM Peripheral Identification Register #7 */
__I uint32_t PID0; /*!< Offset: ITM Peripheral Identification Register #0 */
__I uint32_t PID1; /*!< Offset: ITM Peripheral Identification Register #1 */
__I uint32_t PID2; /*!< Offset: ITM Peripheral Identification Register #2 */
__I uint32_t PID3; /*!< Offset: ITM Peripheral Identification Register #3 */
__I uint32_t CID0; /*!< Offset: ITM Component Identification Register #0 */
__I uint32_t CID1; /*!< Offset: ITM Component Identification Register #1 */
__I uint32_t CID2; /*!< Offset: ITM Component Identification Register #2 */
__I uint32_t CID3; /*!< Offset: ITM Component Identification Register #3 */
} ITM_Type;
/* ITM Trace Privilege Register Definitions */
#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
#define ITM_TPR_PRIVMASK_Msk (0xFul << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
/* ITM Trace Control Register Definitions */
#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
#define ITM_TCR_BUSY_Msk (1ul << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
#define ITM_TCR_ATBID_Pos 16 /*!< ITM TCR: ATBID Position */
#define ITM_TCR_ATBID_Msk (0x7Ful << ITM_TCR_ATBID_Pos) /*!< ITM TCR: ATBID Mask */
#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
#define ITM_TCR_TSPrescale_Msk (3ul << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
#define ITM_TCR_SWOENA_Msk (1ul << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
#define ITM_TCR_DWTENA_Msk (1ul << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
#define ITM_TCR_SYNCENA_Msk (1ul << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
#define ITM_TCR_TSENA_Msk (1ul << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
#define ITM_TCR_ITMENA_Msk (1ul << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
/* ITM Integration Write Register Definitions */
#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
#define ITM_IWR_ATVALIDM_Msk (1ul << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
/* ITM Integration Read Register Definitions */
#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
#define ITM_IRR_ATREADYM_Msk (1ul << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
/* ITM Integration Mode Control Register Definitions */
#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
#define ITM_IMCR_INTEGRATION_Msk (1ul << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
/* ITM Lock Status Register Definitions */
#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
#define ITM_LSR_ByteAcc_Msk (1ul << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
#define ITM_LSR_Access_Msk (1ul << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
#define ITM_LSR_Present_Msk (1ul << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
/*@}*/ /* end of group CMSIS_CM3_ITM */
/** @addtogroup CMSIS_CM3_InterruptType CMSIS CM3 Interrupt Type
memory mapped structure for Interrupt Type
@{
*/
typedef struct
{
uint32_t RESERVED0;
__I uint32_t ICTR; /*!< Offset: 0x04 Interrupt Control Type Register */
__IO uint32_t ACTLR; /*!< Offset: 0x08 Auxiliary Control Register */
} InterruptType_Type;
/* Interrupt Controller Type Register Definitions */
#define InterruptType_ICTR_INTLINESNUM_Pos 0 /*!< InterruptType ICTR: INTLINESNUM Position */
#define InterruptType_ICTR_INTLINESNUM_Msk (0x1Ful << InterruptType_ICTR_INTLINESNUM_Pos) /*!< InterruptType ICTR: INTLINESNUM Mask */
/* Auxiliary Control Register Definitions */
#define InterruptType_ACTLR_DISFOLD_Pos 2 /*!< InterruptType ACTLR: DISFOLD Position */
#define InterruptType_ACTLR_DISFOLD_Msk (1ul << InterruptType_ACTLR_DISFOLD_Pos) /*!< InterruptType ACTLR: DISFOLD Mask */
#define InterruptType_ACTLR_DISDEFWBUF_Pos 1 /*!< InterruptType ACTLR: DISDEFWBUF Position */
#define InterruptType_ACTLR_DISDEFWBUF_Msk (1ul << InterruptType_ACTLR_DISDEFWBUF_Pos) /*!< InterruptType ACTLR: DISDEFWBUF Mask */
#define InterruptType_ACTLR_DISMCYCINT_Pos 0 /*!< InterruptType ACTLR: DISMCYCINT Position */
#define InterruptType_ACTLR_DISMCYCINT_Msk (1ul << InterruptType_ACTLR_DISMCYCINT_Pos) /*!< InterruptType ACTLR: DISMCYCINT Mask */
/*@}*/ /* end of group CMSIS_CM3_InterruptType */
#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
/** @addtogroup CMSIS_CM3_MPU CMSIS CM3 MPU
memory mapped structure for Memory Protection Unit (MPU)
@{
*/
typedef struct
{
__I uint32_t TYPE; /*!< Offset: 0x00 MPU Type Register */
__IO uint32_t CTRL; /*!< Offset: 0x04 MPU Control Register */
__IO uint32_t RNR; /*!< Offset: 0x08 MPU Region RNRber Register */
__IO uint32_t RBAR; /*!< Offset: 0x0C MPU Region Base Address Register */
__IO uint32_t RASR; /*!< Offset: 0x10 MPU Region Attribute and Size Register */
__IO uint32_t RBAR_A1; /*!< Offset: 0x14 MPU Alias 1 Region Base Address Register */
__IO uint32_t RASR_A1; /*!< Offset: 0x18 MPU Alias 1 Region Attribute and Size Register */
__IO uint32_t RBAR_A2; /*!< Offset: 0x1C MPU Alias 2 Region Base Address Register */
__IO uint32_t RASR_A2; /*!< Offset: 0x20 MPU Alias 2 Region Attribute and Size Register */
__IO uint32_t RBAR_A3; /*!< Offset: 0x24 MPU Alias 3 Region Base Address Register */
__IO uint32_t RASR_A3; /*!< Offset: 0x28 MPU Alias 3 Region Attribute and Size Register */
} MPU_Type;
/* MPU Type Register */
#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
#define MPU_TYPE_IREGION_Msk (0xFFul << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
#define MPU_TYPE_DREGION_Msk (0xFFul << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
#define MPU_TYPE_SEPARATE_Msk (1ul << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
/* MPU Control Register */
#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
#define MPU_CTRL_PRIVDEFENA_Msk (1ul << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
#define MPU_CTRL_HFNMIENA_Msk (1ul << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
#define MPU_CTRL_ENABLE_Msk (1ul << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
/* MPU Region Number Register */
#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
#define MPU_RNR_REGION_Msk (0xFFul << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
/* MPU Region Base Address Register */
#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
#define MPU_RBAR_ADDR_Msk (0x7FFFFFFul << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
#define MPU_RBAR_VALID_Msk (1ul << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
#define MPU_RBAR_REGION_Msk (0xFul << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
/* MPU Region Attribute and Size Register */
#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: XN Position */
#define MPU_RASR_XN_Msk (1ul << MPU_RASR_XN_Pos) /*!< MPU RASR: XN Mask */
#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: AP Position */
#define MPU_RASR_AP_Msk (7ul << MPU_RASR_AP_Pos) /*!< MPU RASR: AP Mask */
#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: TEX Position */
#define MPU_RASR_TEX_Msk (7ul << MPU_RASR_TEX_Pos) /*!< MPU RASR: TEX Mask */
#define MPU_RASR_S_Pos 18 /*!< MPU RASR: Shareable bit Position */
#define MPU_RASR_S_Msk (1ul << MPU_RASR_S_Pos) /*!< MPU RASR: Shareable bit Mask */
#define MPU_RASR_C_Pos 17 /*!< MPU RASR: Cacheable bit Position */
#define MPU_RASR_C_Msk (1ul << MPU_RASR_C_Pos) /*!< MPU RASR: Cacheable bit Mask */
#define MPU_RASR_B_Pos 16 /*!< MPU RASR: Bufferable bit Position */
#define MPU_RASR_B_Msk (1ul << MPU_RASR_B_Pos) /*!< MPU RASR: Bufferable bit Mask */
#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
#define MPU_RASR_SRD_Msk (0xFFul << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
#define MPU_RASR_SIZE_Msk (0x1Ful << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
#define MPU_RASR_ENA_Pos 0 /*!< MPU RASR: Region enable bit Position */
#define MPU_RASR_ENA_Msk (0x1Ful << MPU_RASR_ENA_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
/*@}*/ /* end of group CMSIS_CM3_MPU */
#endif
/** @addtogroup CMSIS_CM3_CoreDebug CMSIS CM3 Core Debug
memory mapped structure for Core Debug Register
@{
*/
typedef struct
{
__IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */
__O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */
__IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */
__IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */
} CoreDebug_Type;
/* Debug Halting Control and Status Register */
#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1ul << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
/* Debug Core Register Selector Register */
#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
/* Debug Exception and Monitor Control Register */
#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
#define CoreDebug_DEMCR_TRCENA_Msk (1ul << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
#define CoreDebug_DEMCR_MON_REQ_Msk (1ul << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
#define CoreDebug_DEMCR_MON_STEP_Msk (1ul << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
#define CoreDebug_DEMCR_MON_PEND_Msk (1ul << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
#define CoreDebug_DEMCR_MON_EN_Msk (1ul << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
#define CoreDebug_DEMCR_VC_INTERR_Msk (1ul << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
#define CoreDebug_DEMCR_VC_BUSERR_Msk (1ul << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
#define CoreDebug_DEMCR_VC_STATERR_Msk (1ul << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
#define CoreDebug_DEMCR_VC_CHKERR_Msk (1ul << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1ul << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
#define CoreDebug_DEMCR_VC_MMERR_Msk (1ul << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
/*@}*/ /* end of group CMSIS_CM3_CoreDebug */
/* Memory mapping of Cortex-M3 Hardware */
#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */
#define ITM_BASE (0xE0000000) /*!< ITM Base Address */
#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */
#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */
#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */
#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */
#define InterruptType ((InterruptType_Type *) SCS_BASE) /*!< Interrupt Type Register */
#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */
#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */
#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */
#define ITM ((ITM_Type *) ITM_BASE) /*!< ITM configuration struct */
#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1)
#define MPU_BASE (SCS_BASE + 0x0D90) /*!< Memory Protection Unit */
#define MPU ((MPU_Type*) MPU_BASE) /*!< Memory Protection Unit */
#endif
/*@}*/ /* end of group CMSIS_CM3_core_register */
/*******************************************************************************
* Hardware Abstraction Layer
******************************************************************************/
#if defined ( __CC_ARM )
#define __ASM __asm /*!< asm keyword for ARM Compiler */
#define __INLINE __inline /*!< inline keyword for ARM Compiler */
#elif defined ( __ICCARM__ )
#define __ASM __asm /*!< asm keyword for IAR Compiler */
#define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */
#elif defined ( __GNUC__ )
#define __ASM __asm /*!< asm keyword for GNU Compiler */
#define __INLINE inline /*!< inline keyword for GNU Compiler */
#elif defined ( __TASKING__ )
#define __ASM __asm /*!< asm keyword for TASKING Compiler */
#define __INLINE inline /*!< inline keyword for TASKING Compiler */
#endif
/* ########################## Core Instruction Access ######################### */
#include "core_cmInstr.h"
/* ########################### Core Function Access ########################### */
#include "core_cmFunc.h"
/** @addtogroup CMSIS_CM3_Core_FunctionInterface CMSIS CM3 Core Function Interface
Core Function Interface containing:
- Core NVIC Functions
- Core SysTick Functions
- Core Reset Functions
*/
/*@{*/
/* ########################## NVIC functions #################################### */
/**
* @brief Set the Priority Grouping in NVIC Interrupt Controller
*
* @param PriorityGroup is priority grouping field
*
* Set the priority grouping field using the required unlock sequence.
* The parameter priority_grouping is assigned to the field
* SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used.
* In case of a conflict between priority grouping and available
* priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set.
*/
static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
{
uint32_t reg_value;
uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
reg_value = SCB->AIRCR; /* read old register configuration */
reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
reg_value = (reg_value |
(0x5FA << SCB_AIRCR_VECTKEY_Pos) |
(PriorityGroupTmp << 8)); /* Insert write key and priorty group */
SCB->AIRCR = reg_value;
}
/**
* @brief Get the Priority Grouping from NVIC Interrupt Controller
*
* @return priority grouping field
*
* Get the priority grouping from NVIC Interrupt Controller.
* priority grouping is SCB->AIRCR [10:8] PRIGROUP field.
*/
static __INLINE uint32_t NVIC_GetPriorityGrouping(void)
{
return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
}
/**
* @brief Enable Interrupt in NVIC Interrupt Controller
*
* @param IRQn The positive number of the external interrupt to enable
*
* Enable a device specific interupt in the NVIC interrupt controller.
* The interrupt number cannot be a negative value.
*/
static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
{
NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
}
/**
* @brief Disable the interrupt line for external interrupt specified
*
* @param IRQn The positive number of the external interrupt to disable
*
* Disable a device specific interupt in the NVIC interrupt controller.
* The interrupt number cannot be a negative value.
*/
static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
{
NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
}
/**
* @brief Read the interrupt pending bit for a device specific interrupt source
*
* @param IRQn The number of the device specifc interrupt
* @return 1 = interrupt pending, 0 = interrupt not pending
*
* Read the pending register in NVIC and return 1 if its status is pending,
* otherwise it returns 0
*/
static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
{
return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
}
/**
* @brief Set the pending bit for an external interrupt
*
* @param IRQn The number of the interrupt for set pending
*
* Set the pending bit for the specified interrupt.
* The interrupt number cannot be a negative value.
*/
static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
{
NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
}
/**
* @brief Clear the pending bit for an external interrupt
*
* @param IRQn The number of the interrupt for clear pending
*
* Clear the pending bit for the specified interrupt.
* The interrupt number cannot be a negative value.
*/
static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
{
NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
}
/**
* @brief Read the active bit for an external interrupt
*
* @param IRQn The number of the interrupt for read active bit
* @return 1 = interrupt active, 0 = interrupt not active
*
* Read the active register in NVIC and returns 1 if its status is active,
* otherwise it returns 0.
*/
static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
{
return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
}
/**
* @brief Set the priority for an interrupt
*
* @param IRQn The number of the interrupt for set priority
* @param priority The priority to set
*
* Set the priority for the specified interrupt. The interrupt
* number can be positive to specify an external (device specific)
* interrupt, or negative to specify an internal (core) interrupt.
*
* Note: The priority cannot be set for every core interrupt.
*/
static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
{
if(IRQn < 0) {
SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */
else {
NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
}
/**
* @brief Read the priority for an interrupt
*
* @param IRQn The number of the interrupt for get priority
* @return The priority for the interrupt
*
* Read the priority for the specified interrupt. The interrupt
* number can be positive to specify an external (device specific)
* interrupt, or negative to specify an internal (core) interrupt.
*
* The returned priority value is automatically aligned to the implemented
* priority bits of the microcontroller.
*
* Note: The priority cannot be set for every core interrupt.
*/
static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
{
if(IRQn < 0) {
return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M3 system interrupts */
else {
return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
}
/**
* @brief Encode the priority for an interrupt
*
* @param PriorityGroup The used priority group
* @param PreemptPriority The preemptive priority value (starting from 0)
* @param SubPriority The sub priority value (starting from 0)
* @return The encoded priority for the interrupt
*
* Encode the priority for an interrupt with the given priority group,
* preemptive priority value and sub priority value.
* In case of a conflict between priority grouping and available
* priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
*
* The returned priority value can be used for NVIC_SetPriority(...) function
*/
static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
{
uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
uint32_t PreemptPriorityBits;
uint32_t SubPriorityBits;
PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
return (
((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
((SubPriority & ((1 << (SubPriorityBits )) - 1)))
);
}
/**
* @brief Decode the priority of an interrupt
*
* @param Priority The priority for the interrupt
* @param PriorityGroup The used priority group
* @param pPreemptPriority The preemptive priority value (starting from 0)
* @param pSubPriority The sub priority value (starting from 0)
*
* Decode an interrupt priority value with the given priority group to
* preemptive priority value and sub priority value.
* In case of a conflict between priority grouping and available
* priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
*
* The priority value can be retrieved with NVIC_GetPriority(...) function
*/
static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
{
uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
uint32_t PreemptPriorityBits;
uint32_t SubPriorityBits;
PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
*pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
*pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
}
/* ################################## SysTick function ############################################ */
#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0)
/**
* @brief Initialize and start the SysTick counter and its interrupt.
*
* @param ticks number of ticks between two interrupts
* @return 1 = failed, 0 = successful
*
* Initialise the system tick timer and its interrupt and start the
* system tick timer / counter in free running mode to generate
* periodical interrupts.
*/
static __INLINE uint32_t SysTick_Config(uint32_t ticks)
{
if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */
NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */
SysTick->VAL = 0; /* Load the SysTick Counter Value */
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
SysTick_CTRL_TICKINT_Msk |
SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
return (0); /* Function successful */
}
#endif
/* ################################## Reset function ############################################ */
/**
* @brief Initiate a system reset request.
*
* Initiate a system reset request to reset the MCU
*/
static __INLINE void NVIC_SystemReset(void)
{
__DSB(); /* Ensure all outstanding memory accesses included
buffered write are completed before reset */
SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
(SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
__DSB(); /* Ensure completion of memory access */
while(1); /* wait until reset */
}
/*@}*/ /* end of group CMSIS_CM3_Core_FunctionInterface */
/* ##################################### Debug In/Output function ########################################### */
/** @addtogroup CMSIS_CM3_CoreDebugInterface CMSIS CM3 Core Debug Interface
Core Debug Interface containing:
- Core Debug Receive / Transmit Functions
- Core Debug Defines
- Core Debug Variables
*/
/*@{*/
extern volatile int ITM_RxBuffer; /*!< variable to receive characters */
#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */
/**
* @brief Outputs a character via the ITM channel 0
*
* @param ch character to output
* @return character to output
*
* The function outputs a character via the ITM channel 0.
* The function returns when no debugger is connected that has booked the output.
* It is blocking when a debugger is connected, but the previous character send is not transmitted.
*/
static __INLINE uint32_t ITM_SendChar (uint32_t ch)
{
if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */
(ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
(ITM->TER & (1ul << 0) ) ) /* ITM Port #0 enabled */
{
while (ITM->PORT[0].u32 == 0);
ITM->PORT[0].u8 = (uint8_t) ch;
}
return (ch);
}
/**
* @brief Inputs a character via variable ITM_RxBuffer
*
* @return received character, -1 = no character received
*
* The function inputs a character via variable ITM_RxBuffer.
* The function returns when no debugger is connected that has booked the output.
* It is blocking when a debugger is connected, but the previous character send is not transmitted.
*/
static __INLINE int ITM_ReceiveChar (void) {
int ch = -1; /* no character available */
if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
ch = ITM_RxBuffer;
ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
}
return (ch);
}
/**
* @brief Check if a character via variable ITM_RxBuffer is available
*
* @return 1 = character available, 0 = no character available
*
* The function checks variable ITM_RxBuffer whether a character is available or not.
* The function returns '1' if a character is available and '0' if no character is available.
*/
static __INLINE int ITM_CheckChar (void) {
if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
return (0); /* no character available */
} else {
return (1); /* character available */
}
}
/*@}*/ /* end of group CMSIS_CM3_core_DebugInterface */
#ifdef __cplusplus
}
#endif
/*@}*/ /* end of group CMSIS_CM3_core_definitions */
#endif /* __CORE_CM3_H__ */
/*lint -restore */
bsp/fm3/CMSIS/core_cmFunc.h 0 → 100644
浏览文件 @ 91577f18
/**************************************************************************//**
* @file core_cmFunc.h
* @brief CMSIS Cortex-M Core Function Access Header File
* @version V1.40
* @date 16. February 2010
*
* @note
* Copyright (C) 2009-2010 ARM Limited. All rights reserved.
*
* @par
* ARM Limited (ARM) is supplying this software for use with Cortex-M
* processor based microcontrollers. This file can be freely distributed
* within development tools that are supporting such ARM based processors.
*
* @par
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
* ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
******************************************************************************/
#ifndef __CORE_CMFUNC_H__
#define __CORE_CMFUNC_H__
/* ########################### Core Function Access ########################### */
#if defined ( __CC_ARM ) /*------------------ RealView Compiler ----------------*/
/* ARM armcc specific functions */
/**
* @brief Enable IRQ Interrupts
*
* Enables IRQ interrupts by clearing the I-bit in the CPSR.
* Can only be executed in Privileged modes.
*/
/* intrinsic void __enable_irq(); */
/**
* @brief Disable IRQ Interrupts
*
* Disables IRQ interrupts by setting the I-bit in the CPSR.
* Can only be executed in Privileged modes.
*/
/* intrinsic void __disable_irq(); */
/**
* @brief Return the Control Register value
*
* @return Control value
*
* Return the content of the control register
*/
#if (__ARMCC_VERSION < 400000)
extern uint32_t __get_CONTROL(void);
#else /* (__ARMCC_VERSION >= 400000) */
static __INLINE uint32_t __get_CONTROL(void)
{
register uint32_t __regControl __ASM("control");
return(__regControl);
}
#endif /* __ARMCC_VERSION */
/**
* @brief Set the Control Register value
*
* @param control Control value
*
* Set the control register
*/
#if (__ARMCC_VERSION < 400000)
extern void __set_CONTROL(uint32_t control);
#else /* (__ARMCC_VERSION >= 400000) */
static __INLINE void __set_CONTROL(uint32_t control)
{
register uint32_t __regControl __ASM("control");
__regControl = control;
}
#endif /* __ARMCC_VERSION */
/**
* @brief Get IPSR Register value
*
* @return uint32_t IPSR value
*
* return the content of the IPSR register
*/
#if (__ARMCC_VERSION < 400000)
extern uint32_t __get_IPSR(void);
#else /* (__ARMCC_VERSION >= 400000) */
static __INLINE uint32_t __get_IPSR(void)
{
register uint32_t __regIPSR __ASM("ipsr");
return(__regIPSR);
}
#endif /* __ARMCC_VERSION */
/**
* @brief Get APSR Register value
*
* @return uint32_t APSR value
*
* return the content of the APSR register
*/
#if (__ARMCC_VERSION < 400000)
extern uint32_t __get_APSR(void);
#else /* (__ARMCC_VERSION >= 400000) */
static __INLINE uint32_t __get_APSR(void)
{
register uint32_t __regAPSR __ASM("apsr");
return(__regAPSR);
}
#endif /* __ARMCC_VERSION */
/**
* @brief Get xPSR Register value
*
* @return uint32_t xPSR value
*
* return the content of the xPSR register
*/
#if (__ARMCC_VERSION < 400000)
extern uint32_t __get_xPSR(void);
#else /* (__ARMCC_VERSION >= 400000) */
static __INLINE uint32_t __get_xPSR(void)
{
register uint32_t __regXPSR __ASM("xpsr");
return(__regXPSR);
}
#endif /* __ARMCC_VERSION */
/**
* @brief Return the Process Stack Pointer
*
* @return ProcessStackPointer
*
* Return the actual process stack pointer
*/
#if (__ARMCC_VERSION < 400000)
extern uint32_t __get_PSP(void);
#else /* (__ARMCC_VERSION >= 400000) */
static __INLINE uint32_t __get_PSP(void)
{
register uint32_t __regProcessStackPointer __ASM("psp");
return(__regProcessStackPointer);
}
#endif /* __ARMCC_VERSION */
/**
* @brief Set the Process Stack Pointer
*
* @param topOfProcStack Process Stack Pointer
*
* Assign the value ProcessStackPointer to the MSP
* (process stack pointer) Cortex processor register
*/
#if (__ARMCC_VERSION < 400000)
extern void __set_PSP(uint32_t topOfProcStack);
#else /* (__ARMCC_VERSION >= 400000) */
static __INLINE void __set_PSP(uint32_t topOfProcStack)
{
register uint32_t __regProcessStackPointer __ASM("psp");
__regProcessStackPointer = topOfProcStack;
}
#endif /* __ARMCC_VERSION */
/**
* @brief Return the Main Stack Pointer
*
* @return Main Stack Pointer
*
* Return the current value of the MSP (main stack pointer)
* Cortex processor register
*/
#if (__ARMCC_VERSION < 400000)
extern uint32_t __get_MSP(void);
#else /* (__ARMCC_VERSION >= 400000) */
static __INLINE uint32_t __get_MSP(void)
{
register uint32_t __regMainStackPointer __ASM("msp");
return(__regMainStackPointer);
}
#endif /* __ARMCC_VERSION */
/**
* @brief Set the Main Stack Pointer
*
* @param topOfMainStack Main Stack Pointer
*
* Assign the value mainStackPointer to the MSP
* (main stack pointer) Cortex processor register
*/
#if (__ARMCC_VERSION < 400000)
extern void __set_MSP(uint32_t topOfMainStack);
#else /* (__ARMCC_VERSION >= 400000) */
static __INLINE void __set_MSP(uint32_t mainStackPointer)
{
register uint32_t __regMainStackPointer __ASM("msp");
__regMainStackPointer = mainStackPointer;
}
#endif /* __ARMCC_VERSION */
/**
* @brief Return the Priority Mask value
*
* @return PriMask
*
* Return state of the priority mask bit from the priority mask register
*/
#if (__ARMCC_VERSION < 400000)
extern uint32_t __get_PRIMASK(void);
#else /* (__ARMCC_VERSION >= 400000) */
static __INLINE uint32_t __get_PRIMASK(void)
{
register uint32_t __regPriMask __ASM("primask");
return(__regPriMask);
}
#endif /* __ARMCC_VERSION */
/**
* @brief Set the Priority Mask value
*
* @param priMask PriMask
*
* Set the priority mask bit in the priority mask register
*/
#if (__ARMCC_VERSION < 400000)
extern void __set_PRIMASK(uint32_t priMask);
#else /* (__ARMCC_VERSION >= 400000) */
static __INLINE void __set_PRIMASK(uint32_t priMask)
{
register uint32_t __regPriMask __ASM("primask");
__regPriMask = (priMask);
}
#endif /* __ARMCC_VERSION */
#if (__CORTEX_M >= 0x03)
/**
* @brief Enable FIQ Interrupts
*
* Enables FIQ interrupts by clearing the F-bit in the CPSR.
* Can only be executed in Privileged modes.
*/
#define __enable_fault_irq __enable_fiq
/**
* @brief Disable FIQ Interrupts
*
* Disables FIQ interrupts by setting the F-bit in the CPSR.
* Can only be executed in Privileged modes.
*/
#define __disable_fault_irq __disable_fiq
/**
* @brief Return the Base Priority value
*
* @return BasePriority
*
* Return the content of the base priority register
*/
#if (__ARMCC_VERSION < 400000)
extern uint32_t __get_BASEPRI(void);
#else /* (__ARMCC_VERSION >= 400000) */
static __INLINE uint32_t __get_BASEPRI(void)
{
register uint32_t __regBasePri __ASM("basepri");
return(__regBasePri);
}
#endif /* __ARMCC_VERSION */
/**
* @brief Set the Base Priority value
*
* @param basePri BasePriority
*
* Set the base priority register
*/
#if (__ARMCC_VERSION < 400000)
extern void __set_BASEPRI(uint32_t basePri);
#else /* (__ARMCC_VERSION >= 400000) */
static __INLINE void __set_BASEPRI(uint32_t basePri)
{
register uint32_t __regBasePri __ASM("basepri");
__regBasePri = (basePri & 0xff);
}
#endif /* __ARMCC_VERSION */
/**
* @brief Return the Fault Mask value
*
* @return FaultMask
*
* Return the content of the fault mask register
*/
#if (__ARMCC_VERSION < 400000)
extern uint32_t __get_FAULTMASK(void);
#else /* (__ARMCC_VERSION >= 400000) */
static __INLINE uint32_t __get_FAULTMASK(void)
{
register uint32_t __regFaultMask __ASM("faultmask");
return(__regFaultMask);
}
#endif /* __ARMCC_VERSION */
/**
* @brief Set the Fault Mask value
*
* @param faultMask faultMask value
*
* Set the fault mask register
*/
#if (__ARMCC_VERSION < 400000)
extern void __set_FAULTMASK(uint32_t faultMask);
#else /* (__ARMCC_VERSION >= 400000) */
static __INLINE void __set_FAULTMASK(uint32_t faultMask)
{
register uint32_t __regFaultMask __ASM("faultmask");
__regFaultMask = (faultMask & 1);
}
#endif /* __ARMCC_VERSION */
#endif /* (__CORTEX_M >= 0x03) */
#if (__CORTEX_M == 0x04)
/**
* @brief Return the FPSCR value
*
* @return FloatingPointStatusControlRegister
*
* Return the content of the FPSCR register
*/
static __INLINE uint32_t __get_FPSCR(void)
{
#if (__FPU_PRESENT == 1)
register uint32_t __regfpscr __ASM("fpscr");
return(__regfpscr);
#else
return(0);
#endif
}
/**
* @brief Set the FPSCR value
*
* @param fpscr FloatingPointStatusControlRegister
*
* Set the FPSCR register
*/
static __INLINE void __set_FPSCR(uint32_t fpscr)
{
#if (__FPU_PRESENT == 1)
register uint32_t __regfpscr __ASM("fpscr");
__regfpscr = (fpscr);
#endif
}
#endif /* (__CORTEX_M == 0x04) */
#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
/* IAR iccarm specific functions */
#if defined (__ICCARM__)
#include <intrinsics.h> /* IAR Intrinsics */
#endif
#pragma diag_suppress=Pe940
/**
* @brief Enable IRQ Interrupts
*
* Enables IRQ interrupts by clearing the I-bit in the CPSR.
* Can only be executed in Privileged modes.
*/
#define __enable_irq __enable_interrupt
/**
* @brief Disable IRQ Interrupts
*
* Disables IRQ interrupts by setting the I-bit in the CPSR.
* Can only be executed in Privileged modes.
*/
#define __disable_irq __disable_interrupt
/**
* @brief Return the Control Register value
*
* @return Control value
*
* Return the content of the control register
*/
/* intrinsic unsigned long __get_CONTROL( void ); (see intrinsic.h) */
/**
* @brief Set the Control Register value
*
* @param control Control value
*
* Set the control register
*/
/* intrinsic void __set_CONTROL( unsigned long ); (see intrinsic.h) */
/**
* @brief Get IPSR Register value
*
* @return uint32_t IPSR value
*
* return the content of the IPSR register
*/
static uint32_t __get_IPSR(void)
{
__ASM("mrs r0, ipsr");
}
/**
* @brief Get APSR Register value
*
* @return uint32_t APSR value
*
* return the content of the APSR register
*/
/* __intrinsic unsigned long __get_APSR( void ); (see intrinsic.h) */
/**
* @brief Get xPSR Register value
*
* @return uint32_t xPSR value
*
* return the content of the xPSR register
*/
static uint32_t __get_xPSR(void)
{
__ASM("mrs r0, psr"); // assembler does not know "xpsr"
}
/**
* @brief Return the Process Stack Pointer
*
* @return ProcessStackPointer
*
* Return the actual process stack pointer
*/
static uint32_t __get_PSP(void)
{
__ASM("mrs r0, psp");
}
/**
* @brief Set the Process Stack Pointer
*
* @param topOfProcStack Process Stack Pointer
*
* Assign the value ProcessStackPointer to the MSP
* (process stack pointer) Cortex processor register
*/
static void __set_PSP(uint32_t topOfProcStack)
{
__ASM("msr psp, r0");
}
/**
* @brief Return the Main Stack Pointer
*
* @return Main Stack Pointer
*
* Return the current value of the MSP (main stack pointer)
* Cortex processor register
*/
static uint32_t __get_MSP(void)
{
__ASM("mrs r0, msp");
}
/**
* @brief Set the Main Stack Pointer
*
* @param topOfMainStack Main Stack Pointer
*
* Assign the value mainStackPointer to the MSP
* (main stack pointer) Cortex processor register
*/
static void __set_MSP(uint32_t topOfMainStack)
{
__ASM("msr msp, r0");
}
/**
* @brief Return the Priority Mask value
*
* @return PriMask
*
* Return state of the priority mask bit from the priority mask register
*/
/* intrinsic unsigned long __get_PRIMASK( void ); (see intrinsic.h) */
/**
* @brief Set the Priority Mask value
*
* @param priMask PriMask
*
* Set the priority mask bit in the priority mask register
*/
/* intrinsic void __set_PRIMASK( unsigned long ); (see intrinsic.h) */
#if (__CORTEX_M >= 0x03)
/**
* @brief Enable FIQ Interrupts
*
* Enables FIQ interrupts by clearing the F-bit in the CPSR.
* Can only be executed in Privileged modes.
*/
static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); }
/**
* @brief Disable FIQ Interrupts
*
* Disables FIQ interrupts by setting the F-bit in the CPSR.
* Can only be executed in Privileged modes.
*/
static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); }
/**
* @brief Return the Base Priority value
*
* @return BasePriority
*
* Return the content of the base priority register
*/
/* intrinsic unsigned long __get_BASEPRI( void ); (see intrinsic.h) */
/**
* @brief Set the Base Priority value
*
* @param basePri BasePriority
*
* Set the base priority register
*/
/* intrinsic void __set_BASEPRI( unsigned long ); (see intrinsic.h) */
/**
* @brief Return the Fault Mask value
*
* @return FaultMask
*
* Return the content of the fault mask register
*/
/* intrinsic unsigned long __get_FAULTMASK( void ); (see intrinsic.h) */
/**
* @brief Set the Fault Mask value
*
* @param faultMask faultMask value
*
* Set the fault mask register
*/
/* intrinsic void __set_FAULTMASK(unsigned long); (see intrinsic.h) */
#endif /* (__CORTEX_M >= 0x03) */
#if (__CORTEX_M == 0x04)
/**
* @brief Return the FPSCR value
*
* @return FloatingPointStatusControlRegister
*
* Return the content of the FPSCR register
*/
static __INLINE uint32_t __get_FPSCR(void)
{
#if (__FPU_PRESENT == 1)
/* not yet implemented */
return(0);
#else
return(0);
#endif
}
/**
* @brief Set the FPSCR value
*
* @param fpscr FloatingPointStatusControlRegister
*
* Set the FPSCR register
*/
static __INLINE void __set_FPSCR(uint32_t fpscr)
{
#if (__FPU_PRESENT == 1)
/* not yet implemented */
#endif
}
#endif /* (__CORTEX_M == 0x04) */
#pragma diag_default=Pe940
#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
/* GNU gcc specific functions */
/**
* @brief Enable IRQ Interrupts
*
* Enables IRQ interrupts by clearing the I-bit in the CPSR.
* Can only be executed in Privileged modes.
*/
static __INLINE void __enable_irq() { __ASM volatile ("cpsie i"); }
/**
* @brief Disable IRQ Interrupts
*
* Disables IRQ interrupts by setting the I-bit in the CPSR.
* Can only be executed in Privileged modes.
*/
static __INLINE void __disable_irq() { __ASM volatile ("cpsid i"); }
/**
* @brief Return the Control Register value
*
* @return Control value
*
* Return the content of the control register
*/
static __INLINE uint32_t __get_CONTROL(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, control" : "=r" (result) );
return(result);
}
/**
* @brief Set the Control Register value
*
* @param control Control value
*
* Set the control register
*/
static __INLINE void __set_CONTROL(uint32_t control)
{
__ASM volatile ("MSR control, %0" : : "r" (control) );
}
/**
* @brief Get IPSR Register value
*
* @return uint32_t IPSR value
*
* return the content of the IPSR register
*/
static __INLINE uint32_t __get_IPSR(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, ipsr" : "=r" (result) );
return(result);
}
/**
* @brief Get APSR Register value
*
* @return uint32_t APSR value
*
* return the content of the APSR register
*/
static __INLINE uint32_t __get_APSR(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, apsr" : "=r" (result) );
return(result);
}
/**
* @brief Get xPSR Register value
*
* @return uint32_t xPSR value
*
* return the content of the xPSR register
*/
static __INLINE uint32_t __get_xPSR(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, xpsr" : "=r" (result) );
return(result);
}
/**
* @brief Return the Process Stack Pointer
*
* @return ProcessStackPointer
*
* Return the actual process stack pointer
*/
static __INLINE uint32_t __get_PSP(void) __attribute__( ( naked ) );
static __INLINE uint32_t __get_PSP(void)
{
register uint32_t result __ASM ("r0") = 0;
__ASM volatile ("MRS %0, psp\n"
"BX lr \n" : "=r" (result) );
return(result);
}
/**
* @brief Set the Process Stack Pointer
*
* @param topOfProcStack Process Stack Pointer
*
* Assign the value ProcessStackPointer to the MSP
* (process stack pointer) Cortex processor register
*/
static __INLINE void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) );
static __INLINE void __set_PSP(uint32_t topOfProcStack)
{
__ASM volatile ("MSR psp, %0\n"
"BX lr \n" : : "r" (topOfProcStack) );
}
/**
* @brief Return the Main Stack Pointer
*
* @return Main Stack Pointer
*
* Return the current value of the MSP (main stack pointer)
* Cortex processor register
*/
static __INLINE uint32_t __get_MSP(void) __attribute__( ( naked ) );
static __INLINE uint32_t __get_MSP(void)
{
register uint32_t result __ASM ("r0") = 0;
__ASM volatile ("MRS %0, msp\n"
"BX lr \n" : "=r" (result) );
return(result);
}
/**
* @brief Set the Main Stack Pointer
*
* @param topOfMainStack Main Stack Pointer
*
* Assign the value mainStackPointer to the MSP
* (main stack pointer) Cortex processor register
*/
static __INLINE void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) );
static __INLINE void __set_MSP(uint32_t topOfMainStack)
{
__ASM volatile ("MSR msp, %0\n"
"BX lr \n" : : "r" (topOfMainStack) );
}
/**
* @brief Return the Priority Mask value
*
* @return PriMask
*
* Return state of the priority mask bit from the priority mask register
*/
static __INLINE uint32_t __get_PRIMASK(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, primask" : "=r" (result) );
return(result);
}
/**
* @brief Set the Priority Mask value
*
* @param priMask PriMask
*
* Set the priority mask bit in the priority mask register
*/
static __INLINE void __set_PRIMASK(uint32_t priMask)
{
__ASM volatile ("MSR primask, %0" : : "r" (priMask) );
}
#if (__CORTEX_M >= 0x03)
/**
* @brief Enable FIQ Interrupts
*
* Enables FIQ interrupts by clearing the F-bit in the CPSR.
* Can only be executed in Privileged modes.
*/
static __INLINE void __enable_fault_irq() { __ASM volatile ("cpsie f"); }
/**
* @brief Disable FIQ Interrupts
*
* Disables FIQ interrupts by setting the F-bit in the CPSR.
* Can only be executed in Privileged modes.
*/
static __INLINE void __disable_fault_irq() { __ASM volatile ("cpsid f"); }
/**
* @brief Return the Base Priority value
*
* @return BasePriority
*
* Return the content of the base priority register
*/
static __INLINE uint32_t __get_BASEPRI(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
return(result);
}
/**
* @brief Set the Base Priority value
*
* @param basePri BasePriority
*
* Set the base priority register
*/
static __INLINE void __set_BASEPRI(uint32_t value)
{
__ASM volatile ("MSR basepri, %0" : : "r" (value) );
}
/**
* @brief Return the Fault Mask value
*
* @return FaultMask
*
* Return the content of the fault mask register
*/
static __INLINE uint32_t __get_FAULTMASK(void)
{
uint32_t result=0;
__ASM volatile ("MRS %0, faultmask" : "=r" (result) );
return(result);
}
#endif /* (__CORTEX_M >= 0x03) */
/**
* @brief Set the Fault Mask value
*
* @param faultMask faultMask value
*
* Set the fault mask register
*/
static __INLINE void __set_FAULTMASK(uint32_t faultMask)
{
__ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) );
}
#if (__CORTEX_M == 0x04)
/**
* @brief Return the FPSCR value
*
* @return FloatingPointStatusControlRegister
*
* Return the content of the FPSCR register
*/
static __INLINE uint32_t __get_FPSCR(void)
{
#if (__FPU_PRESENT == 1)
uint32_t result=0;
__ASM volatile ("MRS %0, fpscr" : "=r" (result) );
return(result);
#else
return(0);
#endif
}
/**
* @brief Set the FPSCR value
*
* @param fpscr FloatingPointStatusControlRegister
*
* Set the FPSCR register
*/
static __INLINE void __set_FPSCR(uint32_t fpscr)
{
#if (__FPU_PRESENT == 1)
__ASM volatile ("MSR control, %0" : : "r" (fpscr) );
#endif
}
#endif /* (__CORTEX_M == 0x04) */
#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
/* TASKING carm specific functions */
/*
* The CMSIS functions have been implemented as intrinsics in the compiler.
* Please use "carm -?i" to get an up to date list of all instrinsics,
* Including the CMSIS ones.
*/
#endif
#endif // __CORE_CMFUNC_H__
bsp/fm3/CMSIS/core_cmInstr.h 0 → 100644
浏览文件 @ 91577f18
/**************************************************************************//**
* @file core_cmInstr.h
* @brief CMSIS Cortex-M Core Instruction Access Header File
* @version V1.40
* @date 16. February 2010
*
* @note
* Copyright (C) 2009-2010 ARM Limited. All rights reserved.
*
* @par
* ARM Limited (ARM) is supplying this software for use with Cortex-M
* processor based microcontrollers. This file can be freely distributed
* within development tools that are supporting such ARM based processors.
*
* @par
* THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
* OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
* ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
* CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
*
******************************************************************************/
#ifndef __CORE_CMINSTR_H__
#define __CORE_CMINSTR_H__
/* ########################## Core Instruction Access ######################### */
#if defined ( __CC_ARM ) /*------------------ RealView Compiler ----------------*/
/* ARM armcc specific functions */
/**
* @brief No Operation
*
* No Operation does nothing. This instruction can be used for code alignment
* purposes.
*/
#define __NOP __nop
/**
* @brief Wait For Interrupt
*
* Wait For Interrupt is a hint instruction that suspends execution until
* one of a number of events occurs.
*/
#define __WFI __wfi
/**
* @brief Wait For Event
*
* Wait For Event is a hint instruction that permits the processor to enter
* a low-power state until one of a number of events occurs.
*/
#define __WFE __wfe
/**
* @brief Send Event
*
* Send Event is a hint instruction. It causes an event to be signaled
* to the CPU.
*/
#define __SEV __sev
/**
* @brief Instruction Synchronization Barrier
*
* Instruction Synchronization Barrier flushes the pipeline in the processor,
* so that all instructions following the ISB are fetched from cache or
* memory, after the instruction has been completed
*/
#define __ISB() __isb(0xF)
/**
* @brief Data Synchronization Barrier
*
* The DSB instruction operation acts as a special kind of Data Memory Barrier.
* The DSB operation completes when all explicit memory accesses before this
* instruction complete.
*/
#define __DSB() __dsb(0xF)
/**
* @brief Data Memory Barrier
*
* DMB ensures the apparent order of the explicit memory operations before
* and after the instruction, without ensuring their completion.
*/
#define __DMB() __dmb(0xF)
/**
* @brief Reverse byte order (32 bit)
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in integer value
*/
#define __REV __rev
/**
* @brief Reverse byte order (16 bit)
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in unsigned short value
*/
#if (__ARMCC_VERSION < 400677)
extern uint32_t __REV16(uint16_t value);
#else /* (__ARMCC_VERSION >= 400677) */
static __INLINE __ASM uint32_t __REV16(uint16_t value)
{
rev16 r0, r0
bx lr
}
#endif /* __ARMCC_VERSION */
/**
* @brief Reverse byte order in signed short value with sign extension to integer
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in signed short value with sign extension to integer
*/
#if (__ARMCC_VERSION < 400677)
extern int32_t __REVSH(int16_t value);
#else /* (__ARMCC_VERSION >= 400677) */
static __INLINE __ASM int32_t __REVSH(int16_t value)
{
revsh r0, r0
bx lr
}
#endif /* __ARMCC_VERSION */
#if (__CORTEX_M >= 0x03)
/**
* @brief Reverse bit order of value
*
* @param value value to reverse
* @return reversed value
*
* Reverse bit order of value
*/
#define __RBIT __rbit
/**
* @brief LDR Exclusive (8 bit)
*
* @param *addr address pointer
* @return value of (*address)
*
* Exclusive LDR command for 8 bit value
*/
#define __LDREXB(ptr) ((unsigned char ) __ldrex(ptr))
/**
* @brief LDR Exclusive (16 bit)
*
* @param *addr address pointer
* @return value of (*address)
*
* Exclusive LDR command for 16 bit values
*/
#define __LDREXH(ptr) ((unsigned short) __ldrex(ptr))
/**
* @brief LDR Exclusive (32 bit)
*
* @param *addr address pointer
* @return value of (*address)
*
* Exclusive LDR command for 32 bit values
*/
#define __LDREXW(ptr) ((unsigned int ) __ldrex(ptr))
/**
* @brief STR Exclusive (8 bit)
*
* @param value value to store
* @param *addr address pointer
* @return successful / failed
*
* Exclusive STR command for 8 bit values
*/
#define __STREXB(value, ptr) __strex(value, ptr)
/**
* @brief STR Exclusive (16 bit)
*
* @param value value to store
* @param *addr address pointer
* @return successful / failed
*
* Exclusive STR command for 16 bit values
*/
#define __STREXH(value, ptr) __strex(value, ptr)
/**
* @brief STR Exclusive (32 bit)
*
* @param value value to store
* @param *addr address pointer
* @return successful / failed
*
* Exclusive STR command for 32 bit values
*/
#define __STREXW(value, ptr) __strex(value, ptr)
/**
* @brief Remove the exclusive lock created by ldrex
*
* Removes the exclusive lock which is created by ldrex.
*/
#if (__ARMCC_VERSION < 400000)
extern void __CLREX(void);
#else /* (__ARMCC_VERSION >= 400000) */
#define __CLREX __clrex
#endif /* __ARMCC_VERSION */
#endif /* (__CORTEX_M >= 0x03) */
#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
/* IAR iccarm specific functions */
#if defined (__ICCARM__)
#include <intrinsics.h> /* IAR Intrinsics */
#endif
#pragma diag_suppress=Pe940
/**
* @brief No Operation
*
* No Operation does nothing. This instruction can be used for code alignment
* purposes.
*/
#define __NOP __no_operation
/**
* @brief Wait For Interrupt
*
* Wait For Interrupt is a hint instruction that suspends execution until
* one of a number of events occurs.
*/
static __INLINE void __WFI() { __ASM ("wfi"); }
/**
* @brief Wait For Event
*
* Wait For Event is a hint instruction that permits the processor to enter
* a low-power state until one of a number of events occurs.
*/
static __INLINE void __WFE() { __ASM ("wfe"); }
/**
* @brief Send Event
*
* Send Event is a hint instruction. It causes an event to be signaled
* to the CPU.
*/
static __INLINE void __SEV() { __ASM ("sev"); }
/**
* @brief Instruction Synchronization Barrier
*
* Instruction Synchronization Barrier flushes the pipeline in the processor,
* so that all instructions following the ISB are fetched from cache or
* memory, after the instruction has been completed
*/
/* intrinsic void __ISB(void) (see intrinsics.h */
/**
* @brief Data Synchronization Barrier
*
* The DSB instruction operation acts as a special kind of Data Memory Barrier.
* The DSB operation completes when all explicit memory accesses before this
* instruction complete.
*/
/* intrinsic void __DSB(void) (see intrinsics.h */
/**
* @brief Data Memory Barrier
*
* DMB ensures the apparent order of the explicit memory operations before
* and after the instruction, without ensuring their completion.
*/
/* intrinsic void __DMB(void) (see intrinsics.h */
/**
* @brief Reverse byte order (32 bit)
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in integer value
*/
/* intrinsic uint32_t __REV(uint32_t value) (see intrinsics.h */
/**
* @brief Reverse byte order (16 bit)
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in unsigned short value
*/
static uint32_t __REV16(uint16_t value)
{
__ASM("rev16 r0, r0");
}
/**
* @brief Reverse byte order in signed short value with sign extension to integer
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in signed short value with sign extension to integer
*/
/* intrinsic uint32_t __REVSH(uint32_t value) (see intrinsics.h */
#if (__CORTEX_M >= 0x03)
/**
* @brief Reverse bit order of value
*
* @param value value to reverse
* @return reversed value
*
* Reverse bit order of value
*/
static uint32_t __RBIT(uint32_t value)
{
__ASM("rbit r0, r0");
}
/**
* @brief LDR Exclusive (8 bit)
*
* @param *addr address pointer
* @return value of (*address)
*
* Exclusive LDR command for 8 bit value
*/
static uint8_t __LDREXB(uint8_t *addr)
{
__ASM("ldrexb r0, [r0]");
}
/**
* @brief LDR Exclusive (16 bit)
*
* @param *addr address pointer
* @return value of (*address)
*
* Exclusive LDR command for 16 bit values
*/
static uint16_t __LDREXH(uint16_t *addr)
{
__ASM("ldrexh r0, [r0]");
}
/**
* @brief LDR Exclusive (32 bit)
*
* @param *addr address pointer
* @return value of (*address)
*
* Exclusive LDR command for 32 bit values
*/
/* intrinsic unsigned long __LDREX(unsigned long *) (see intrinsics.h */
static uint32_t __LDREXW(uint32_t *addr)
{
__ASM("ldrex r0, [r0]");
}
/**
* @brief STR Exclusive (8 bit)
*
* @param value value to store
* @param *addr address pointer
* @return successful / failed
*
* Exclusive STR command for 8 bit values
*/
static uint32_t __STREXB(uint8_t value, uint8_t *addr)
{
__ASM("strexb r0, r0, [r1]");
}
/**
* @brief STR Exclusive (16 bit)
*
* @param value value to store
* @param *addr address pointer
* @return successful / failed
*
* Exclusive STR command for 16 bit values
*/
static uint32_t __STREXH(uint16_t value, uint16_t *addr)
{
__ASM("strexh r0, r0, [r1]");
}
/**
* @brief STR Exclusive (32 bit)
*
* @param value value to store
* @param *addr address pointer
* @return successful / failed
*
* Exclusive STR command for 32 bit values
*/
/* intrinsic unsigned long __STREX(unsigned long, unsigned long) (see intrinsics.h */
static uint32_t __STREXW(uint32_t value, uint32_t *addr)
{
__ASM("strex r0, r0, [r1]");
}
/**
* @brief Remove the exclusive lock created by ldrex
*
* Removes the exclusive lock which is created by ldrex.
*/
static __INLINE void __CLREX() { __ASM ("clrex"); }
#endif /* (__CORTEX_M >= 0x03) */
#pragma diag_default=Pe940
#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
/* GNU gcc specific functions */
/**
* @brief No Operation
*
* No Operation does nothing. This instruction can be used for code alignment
* purposes.
*/
static __INLINE void __NOP() { __ASM volatile ("nop"); }
/**
* @brief Wait For Interrupt
*
* Wait For Interrupt is a hint instruction that suspends execution until
* one of a number of events occurs.
*/
static __INLINE void __WFI() { __ASM volatile ("wfi"); }
/**
* @brief Wait For Event
*
* Wait For Event is a hint instruction that permits the processor to enter
* a low-power state until one of a number of events occurs.
*/
static __INLINE void __WFE() { __ASM volatile ("wfe"); }
/**
* @brief Send Event
*
* Send Event is a hint instruction. It causes an event to be signaled
* to the CPU.
*/
static __INLINE void __SEV() { __ASM volatile ("sev"); }
/**
* @brief Instruction Synchronization Barrier
*
* Instruction Synchronization Barrier flushes the pipeline in the processor,
* so that all instructions following the ISB are fetched from cache or
* memory, after the instruction has been completed
*/
static __INLINE void __ISB() { __ASM volatile ("isb"); }
/**
* @brief Data Synchronization Barrier
*
* The DSB instruction operation acts as a special kind of Data Memory Barrier.
* The DSB operation completes when all explicit memory accesses before this
* instruction complete.
*/
static __INLINE void __DSB() { __ASM volatile ("dsb"); }
/**
* @brief Data Memory Barrier
*
* DMB ensures the apparent order of the explicit memory operations before
* and after the instruction, without ensuring their completion.
*/
static __INLINE void __DMB() { __ASM volatile ("dmb"); }
/**
* @brief Reverse byte order (32 bit)
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in integer value
*/
static __INLINE uint32_t __REV(uint32_t value)
{
uint32_t result=0;
__ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) );
return(result);
}
/**
* @brief Reverse byte order (16 bit)
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in unsigned short value
*/
static __INLINE uint32_t __REV16(uint16_t value)
{
uint32_t result=0;
__ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) );
return(result);
}
/**
* @brief Reverse byte order in signed short value with sign extension to integer
*
* @param value value to reverse
* @return reversed value
*
* Reverse byte order in signed short value with sign extension to integer
*/
static __INLINE int32_t __REVSH(int16_t value)
{
uint32_t result=0;
__ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) );
return(result);
}
#if (__CORTEX_M >= 0x03)
/**
* @brief Reverse bit order of value
*
* @param value value to reverse
* @return reversed value
*
* Reverse bit order of value
*/
static __INLINE uint32_t __RBIT(uint32_t value)
{
uint32_t result=0;
__ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
return(result);
}
/**
* @brief LDR Exclusive (8 bit)
*
* @param *addr address pointer
* @return value of (*address)
*
* Exclusive LDR command for 8 bit value
*/
static __INLINE uint8_t __LDREXB(uint8_t *addr)
{
uint8_t result=0;
__ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) );
return(result);
}
/**
* @brief LDR Exclusive (16 bit)
*
* @param *addr address pointer
* @return value of (*address)
*
* Exclusive LDR command for 16 bit values
*/
static __INLINE uint16_t __LDREXH(uint16_t *addr)
{
uint16_t result=0;
__ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) );
return(result);
}
/**
* @brief LDR Exclusive (32 bit)
*
* @param *addr address pointer
* @return value of (*address)
*
* Exclusive LDR command for 32 bit values
*/
static __INLINE uint32_t __LDREXW(uint32_t *addr)
{
uint32_t result=0;
__ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) );
return(result);
}
/**
* @brief STR Exclusive (8 bit)
*
* @param value value to store
* @param *addr address pointer
* @return successful / failed
*
* Exclusive STR command for 8 bit values
*/
static __INLINE uint32_t __STREXB(uint8_t value, uint8_t *addr)
{
uint32_t result=0;
__ASM volatile ("strexb %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
return(result);
}
/**
* @brief STR Exclusive (16 bit)
*
* @param value value to store
* @param *addr address pointer
* @return successful / failed
*
* Exclusive STR command for 16 bit values
*/
static __INLINE uint32_t __STREXH(uint16_t value, uint16_t *addr)
{
uint32_t result=0;
__ASM volatile ("strexh %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
return(result);
}
/**
* @brief STR Exclusive (32 bit)
*
* @param value value to store
* @param *addr address pointer
* @return successful / failed
*
* Exclusive STR command for 32 bit values
*/
static __INLINE uint32_t __STREXW(uint32_t value, uint32_t *addr)
{
uint32_t result=0;
__ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) );
return(result);
}
/**
* @brief Remove the exclusive lock created by ldrex
*
* Removes the exclusive lock which is created by ldrex.
*/
static __INLINE void __CLREX() { __ASM volatile ("clrex"); }
#endif /* (__CORTEX_M >= 0x03) */
#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
/* TASKING carm specific functions */
/*
* The CMSIS functions have been implemented as intrinsics in the compiler.
* Please use "carm -?i" to get an up to date list of all instrinsics,
* Including the CMSIS ones.
*/
#endif
#endif // __CORE_CMINSTR_H__
bsp/fm3/CMSIS/mb9bf506r.h 0 → 100644
浏览文件 @ 91577f18
因为 它太大了无法显示 source diff 。你可以改为 查看blob。
bsp/fm3/CMSIS/system_mb9bf50x.c 0 → 100644
浏览文件 @ 91577f18
/************************************************************************/
/* (C) Fujitsu Semiconductor Europe GmbH */
/* */
/* The following software deliverable is intended for and must only be */
/* used for reference and in an evaluation laboratory environment. */
/* It is provided on an as-is basis without charge and is subject to */
/* alterations. */
/* It is the users obligation to fully test the software in its */
/* environment and to ensure proper functionality, qualification and */
/* compliance with component specifications. */
/* */
/* In the event the software deliverable includes the use of open */
/* source components, the provisions of the governing open source */
/* license agreement shall apply with respect to such software */
/* deliverable. */
/* FSEU does not warrant that the deliverables do not infringe any */
/* third party intellectual property right (IPR). In the event that */
/* the deliverables infringe a third party IPR it is the sole */
/* responsibility of the customer to obtain necessary licenses to */
/* continue the usage of the deliverable. */
/* */
/* To the maximum extent permitted by applicable law FSEU disclaims all */
/* warranties, whether express or implied, in particular, but not */
/* limited to, warranties of merchantability and fitness for a */
/* particular purpose for which the deliverable is not designated. */
/* */
/* To the maximum extent permitted by applicable law, FSEU's liability */
/* is restricted to intention and gross negligence. */
/* FSEU is not liable for consequential damages. */
/* */
/* (V1.4) */
/************************************************************************/
#include "mb9bf506r.h"
/*
* 80MHz : Master Clock
*/
const uint32_t SystemFrequency = 80000000UL;
uint32_t SysFreHCLK = 80000000UL; /* HCLK = MasterClock / 1 */
uint32_t SysFrePCLK0 = 40000000UL; /* PCLK0 = HCLK / 2 */
uint32_t SysFrePCLK1 = 40000000UL; /* PCLK1 = HCLK / 2 */
uint32_t SysFrePCLK2 = 40000000UL; /* PCLK2 = HCLK / 2 */
uint32_t SysFreTPIU = 0UL; /* TPIUCLK : Disable */
/*
* Prototype of internal function
*/
static void ClockInit(void);
static void HwwdtDisable(void);
/*
* Setup the microcontroller system
*/
void SystemInit (void)
{
HwwdtDisable(); /* Disable Hardware Watchdog */
ClockInit(); /* Initialize Clock */
}
/*
* Initialize Clock
*/
static void ClockInit(void)
{
/*set Main clock stabilization
wait time to 2ms*/
FM3_CRG->CSW_TMR = 0x79;
/*Enable Main Oscilator*/
FM3_CRG->SCM_CTL |= 1<<1;
/*Wait stabilization end*/
while(!(FM3_CRG->SCM_STR & 0x02));
/* sub CLK enable */
FM3_CRG->SCM_CTL |= 0x08;
while(!(FM3_CRG->SCM_STR & 0x08));
/*Set PLL stabilization
wait time to 512uS*/
FM3_CRG->PSW_TMR |= 2;
/*Set PLL to 80MHz*/
FM3_CRG->PLL_CTL1 = 0; /*K = 1, M=1*/
FM3_CRG->PLL_CTL2 = 19; /*N = 20*/
/*Enable PLL*/
FM3_CRG->SCM_CTL |= 0x10;
/*Set bus prescalers*/
FM3_CRG->BSC_PSR = 0; /*Base clock Prescaler 1:1*/
FM3_CRG->APBC0_PSR |= 1; /*APB0 clock Prescaler 1:2*/
FM3_CRG->APBC1_PSR |= 1; /*APB1 clock Prescaler 1:2*/
FM3_CRG->APBC2_PSR |= 1; /*APB2 clock Prescaler 1:2*/
/*Wait PLL stabilizatoin end*/
while(!(FM3_CRG->SCM_STR & 0x10));
/*Select PLL for main clock*/
FM3_CRG->SCM_CTL |= 2<<5;
/*Wait PLL to be connected*/
while((FM3_CRG->SCM_STR & 0xe0) != 0x40);
}
/*
* Stop HW Watchdog Timer
*/
static void HwwdtDisable(void)
{
/* UnLock (except WDG_CTL) */
FM3_HWWDT->WDG_LCK = 0x1ACCE551;
/* UnLock (WDG_CTL) */
FM3_HWWDT->WDG_LCK = 0xE5331AAE;
/* Disable WDG */
FM3_HWWDT->WDG_CTL = 0x00;
}
bsp/fm3/CMSIS/system_mb9bf50x.h 0 → 100644
浏览文件 @ 91577f18
/************************************************************************/
/* (C) Fujitsu Semiconductor Europe GmbH (FSEU) */
/* */
/* The following software deliverable is intended for and must only be */
/* used for reference and in an evaluation laboratory environment. */
/* It is provided on an as-is basis without charge and is subject to */
/* alterations. */
/* It is the user's obligation to fully test the software in its */
/* environment and to ensure proper functionality, qualification and */
/* compliance with component specifications. */
/* */
/* In the event the software deliverable includes the use of open */
/* source components, the provisions of the governing open source */
/* license agreement shall apply with respect to such software */
/* deliverable. */
/* FSEU does not warrant that the deliverables do not infringe any */
/* third party intellectual property right (IPR). In the event that */
/* the deliverables infringe a third party IPR it is the sole */
/* responsibility of the customer to obtain necessary licenses to */
/* continue the usage of the deliverable. */
/* */
/* To the maximum extent permitted by applicable law FSEU disclaims all */
/* warranties, whether express or implied, in particular, but not */
/* limited to, warranties of merchantability and fitness for a */
/* particular purpose for which the deliverable is not designated. */
/* */
/* To the maximum extent permitted by applicable law, FSEU's liability */
/* is restricted to intentional misconduct and gross negligence. */
/* FSEU is not liable for consequential damages. */
/* */
/* (V1.5) */
/************************************************************************/
#ifndef _SYSTEM_MB9BF50X_H_
#define _SYSTEM_MB9BF50X_H_
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
/**
* Initialize the system
*
* @param none
* @return none
*
* @brief Setup the microcontroller system.
* Initialize the System and update the SystemCoreClock variable.
*/
extern void SystemInit (void);
/**
* Update SystemCoreClock variable
*
* @param none
* @return none
*
* @brief Updates the SystemCoreClock with current core Clock
* retrieved from cpu registers.
*/
extern void SystemCoreClockUpdate (void);
#ifdef __cplusplus
}
#endif
#endif /* __SYSTEM_MB9BF50X_H */
bsp/fm3/application.c 0 → 100644
浏览文件 @ 91577f18
/*
* File : application.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009 - 2011, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2011-02-24 Bernard the first version
*/
/**
* @addtogroup FM3
*/
/*@{*/
#include <rtthread.h>
int rt_application_init()
{
return 0;
}
/*@}*/
bsp/fm3/board.c 0 → 100644
浏览文件 @ 91577f18
/*
* File : board.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009 - 2011 RT-Thread Develop Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2011-02-24 Bernard first implementation
*/
#include <rthw.h>
#include <rtthread.h>
#include "board.h"
#include <mb9bf506r.h>
#include <core_cm3.h>
extern const uint32_t SystemFrequency;
/**
* @addtogroup FM3
*/
/*@{*/
/**
* This is the timer interrupt service routine.
*
*/
void rt_hw_timer_handler(void)
{
/* enter interrupt */
rt_interrupt_enter();
rt_tick_increase();
/* leave interrupt */
rt_interrupt_leave();
}
/**
* This function will initial LPC17xx board.
*/
void rt_hw_board_init()
{
/* init systick */
SysTick_Config(SystemFrequency/RT_TICK_PER_SECOND - 1);
}
/*@}*/
bsp/fm3/board.h 0 → 100644
浏览文件 @ 91577f18
/*
* File : board.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-09-22 Bernard add board.h to this bsp
* 2010-02-04 Magicoe add board.h to LPC176x bsp
*/
#ifndef __BOARD_H__
#define __BOARD_H__
void rt_hw_board_init(void);
#endif
bsp/fm3/project.uvopt 0 → 100644
浏览文件 @ 91577f18
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_opt.xsd">
<SchemaVersion>1.0</SchemaVersion>
<Header>### uVision Project, (C) Keil Software</Header>
<Extensions>
<cExt>*.c</cExt>
<aExt>*.s*; *.src; *.a*</aExt>
<oExt>*.obj</oExt>
<lExt>*.lib</lExt>
<tExt>*.txt; *.h; *.inc</tExt>
<pExt>*.plm</pExt>
<CppX>*.cpp</CppX>
</Extensions>
<DaveTm>
<dwLowDateTime>0</dwLowDateTime>
<dwHighDateTime>0</dwHighDateTime>
</DaveTm>
<Target>
<TargetName>RT-Thread FM3</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<TargetOption>
<CLKADS>4000000</CLKADS>
<OPTTT>
<gFlags>1</gFlags>
<BeepAtEnd>1</BeepAtEnd>
<RunSim>1</RunSim>
<RunTarget>0</RunTarget>
</OPTTT>
<OPTHX>
<HexSelection>1</HexSelection>
<FlashByte>65535</FlashByte>
<HexRangeLowAddress>0</HexRangeLowAddress>
<HexRangeHighAddress>0</HexRangeHighAddress>
<HexOffset>0</HexOffset>
</OPTHX>
<OPTLEX>
<PageWidth>79</PageWidth>
<PageLength>66</PageLength>
<TabStop>8</TabStop>
<ListingPath>.\obj\</ListingPath>
</OPTLEX>
<ListingPage>
<CreateCListing>1</CreateCListing>
<CreateAListing>1</CreateAListing>
<CreateLListing>1</CreateLListing>
<CreateIListing>0</CreateIListing>
<AsmCond>1</AsmCond>
<AsmSymb>1</AsmSymb>
<AsmXref>0</AsmXref>
<CCond>1</CCond>
<CCode>0</CCode>
<CListInc>0</CListInc>
<CSymb>0</CSymb>
<LinkerCodeListing>0</LinkerCodeListing>
</ListingPage>
<OPTXL>
<LMap>1</LMap>
<LComments>1</LComments>
<LGenerateSymbols>1</LGenerateSymbols>
<LLibSym>1</LLibSym>
<LLines>1</LLines>
<LLocSym>1</LLocSym>
<LPubSym>1</LPubSym>
<LXref>0</LXref>
<LExpSel>0</LExpSel>
</OPTXL>
<OPTFL>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<IsCurrentTarget>1</IsCurrentTarget>
</OPTFL>
<CpuCode>255</CpuCode>
<DllOpt>
<SimDllName>SARMCM3.DLL</SimDllName>
<SimDllArguments>-MPU</SimDllArguments>
<SimDlgDllName>DCM.DLL</SimDlgDllName>
<SimDlgDllArguments>-pCM3</SimDlgDllArguments>
<TargetDllName>SARMCM3.DLL</TargetDllName>
<TargetDllArguments>-MPU</TargetDllArguments>
<TargetDlgDllName>TCM.DLL</TargetDlgDllName>
<TargetDlgDllArguments>-pCM3</TargetDlgDllArguments>
</DllOpt>
<DebugOpt>
<uSim>0</uSim>
<uTrg>1</uTrg>
<sLdApp>1</sLdApp>
<sGomain>1</sGomain>
<sRbreak>1</sRbreak>
<sRwatch>1</sRwatch>
<sRmem>1</sRmem>
<sRfunc>1</sRfunc>
<sRbox>1</sRbox>
<tLdApp>1</tLdApp>
<tGomain>1</tGomain>
<tRbreak>1</tRbreak>
<tRwatch>1</tRwatch>
<tRmem>1</tRmem>
<tRfunc>0</tRfunc>
<tRbox>1</tRbox>
<sRunDeb>0</sRunDeb>
<sLrtime>0</sLrtime>
<nTsel>7</nTsel>
<sDll></sDll>
<sDllPa></sDllPa>
<sDlgDll></sDlgDll>
<sDlgPa></sDlgPa>
<sIfile></sIfile>
<tDll></tDll>
<tDllPa></tDllPa>
<tDlgDll></tDlgDll>
<tDlgPa></tDlgPa>
<tIfile></tIfile>
<pMon>Segger\JL2CM3.dll</pMon>
</DebugOpt>
<DebugFlag>
<trace>0</trace>
<periodic>0</periodic>
<aLwin>0</aLwin>
<aCover>0</aCover>
<aSer1>0</aSer1>
<aSer2>0</aSer2>
<aPa>0</aPa>
<viewmode>0</viewmode>
<vrSel>0</vrSel>
<aSym>0</aSym>
<aTbox>0</aTbox>
<AscS1>0</AscS1>
<AscS2>0</AscS2>
<AscS3>0</AscS3>
<aSer3>0</aSer3>
<eProf>0</eProf>
<aLa>0</aLa>
<aPa1>0</aPa1>
<AscS4>0</AscS4>
<aSer4>0</aSer4>
<StkLoc>0</StkLoc>
<TrcWin>0</TrcWin>
<newCpu>0</newCpu>
<uProt>0</uProt>
</DebugFlag>
<LintExecutable></LintExecutable>
<LintConfigFile></LintConfigFile>
</TargetOption>
</Target>
<Group>
<GroupName>Startup</GroupName>
<tvExp>1</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>1</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>.\application.c</PathWithFileName>
<FilenameWithoutPath>application.c</FilenameWithoutPath>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>2</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>.\board.c</PathWithFileName>
<FilenameWithoutPath>board.c</FilenameWithoutPath>
</File>
<File>
<GroupNumber>1</GroupNumber>
<FileNumber>3</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>.\startup.c</PathWithFileName>
<FilenameWithoutPath>startup.c</FilenameWithoutPath>
</File>
</Group>
<Group>
<GroupName>Kernel</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>4</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\src\clock.c</PathWithFileName>
<FilenameWithoutPath>clock.c</FilenameWithoutPath>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>5</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>1</TopLine>
<CurrentLine>1</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\src\device.c</PathWithFileName>
<FilenameWithoutPath>device.c</FilenameWithoutPath>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>6</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>58</TopLine>
<CurrentLine>58</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\src\idle.c</PathWithFileName>
<FilenameWithoutPath>idle.c</FilenameWithoutPath>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>7</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\src\ipc.c</PathWithFileName>
<FilenameWithoutPath>ipc.c</FilenameWithoutPath>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>8</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\src\irq.c</PathWithFileName>
<FilenameWithoutPath>irq.c</FilenameWithoutPath>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>9</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\src\kservice.c</PathWithFileName>
<FilenameWithoutPath>kservice.c</FilenameWithoutPath>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>10</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\src\mem.c</PathWithFileName>
<FilenameWithoutPath>mem.c</FilenameWithoutPath>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>11</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\src\mempool.c</PathWithFileName>
<FilenameWithoutPath>mempool.c</FilenameWithoutPath>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>13</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\src\object.c</PathWithFileName>
<FilenameWithoutPath>object.c</FilenameWithoutPath>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>14</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\src\scheduler.c</PathWithFileName>
<FilenameWithoutPath>scheduler.c</FilenameWithoutPath>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>15</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\src\thread.c</PathWithFileName>
<FilenameWithoutPath>thread.c</FilenameWithoutPath>
</File>
<File>
<GroupNumber>2</GroupNumber>
<FileNumber>16</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\src\timer.c</PathWithFileName>
<FilenameWithoutPath>timer.c</FilenameWithoutPath>
</File>
</Group>
<Group>
<GroupName>FM3</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>18</FileNumber>
<FileType>2</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\libcpu\arm\fm3\context_rvds.S</PathWithFileName>
<FilenameWithoutPath>context_rvds.S</FilenameWithoutPath>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>19</FileNumber>
<FileType>2</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\libcpu\arm\fm3\fault_rvds.S</PathWithFileName>
<FilenameWithoutPath>fault_rvds.S</FilenameWithoutPath>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>20</FileNumber>
<FileType>2</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\libcpu\arm\fm3\start_rvds.S</PathWithFileName>
<FilenameWithoutPath>start_rvds.S</FilenameWithoutPath>
</File>
<File>
<GroupNumber>3</GroupNumber>
<FileNumber>0</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>..\..\libcpu\arm\fm3\cpuport.c</PathWithFileName>
<FilenameWithoutPath>cpuport.c</FilenameWithoutPath>
</File>
</Group>
<Group>
<GroupName>CMSIS</GroupName>
<tvExp>0</tvExp>
<tvExpOptDlg>0</tvExpOptDlg>
<cbSel>0</cbSel>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>21</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>.\CMSIS\core_cm3.c</PathWithFileName>
<FilenameWithoutPath>core_cm3.c</FilenameWithoutPath>
</File>
<File>
<GroupNumber>4</GroupNumber>
<FileNumber>22</FileNumber>
<FileType>1</FileType>
<tvExp>0</tvExp>
<Focus>0</Focus>
<ColumnNumber>0</ColumnNumber>
<tvExpOptDlg>0</tvExpOptDlg>
<TopLine>0</TopLine>
<CurrentLine>0</CurrentLine>
<bDave2>0</bDave2>
<PathWithFileName>.\CMSIS\system_mb9bf50x.c</PathWithFileName>
<FilenameWithoutPath>system_mb9bf50x.c</FilenameWithoutPath>
</File>
</Group>
</ProjectOpt>
bsp/fm3/project.uvproj 0 → 100644
浏览文件 @ 91577f18
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_proj.xsd">
<SchemaVersion>1.1</SchemaVersion>
<Header>### uVision Project, (C) Keil Software</Header>
<Targets>
<Target>
<TargetName>RT-Thread FM3</TargetName>
<ToolsetNumber>0x4</ToolsetNumber>
<ToolsetName>ARM-ADS</ToolsetName>
<TargetOption>
<TargetCommonOption>
<Device>MB9BF500R</Device>
<Vendor>Fujitsu Microelectronics</Vendor>
<Cpu>IRAM(0x20000000-0x20003FFF) IROM(0x00000000-0x0003FFFF) CLOCK(4000000) CPUTYPE("Cortex-M3")</Cpu>
<FlashUtilSpec></FlashUtilSpec>
<StartupFile>"STARTUP\FUJITSU\MB9BF50x\startup_MB9BF50x.s" ("Fujitsu MB9BF50x Startup Code")</StartupFile>
<FlashDriverDll>UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0MB9BF50x_256 -FS00 -FL040000)</FlashDriverDll>
<DeviceId>5155</DeviceId>
<RegisterFile>MB9BF50x.h</RegisterFile>
<MemoryEnv></MemoryEnv>
<Cmp></Cmp>
<Asm></Asm>
<Linker></Linker>
<OHString></OHString>
<InfinionOptionDll></InfinionOptionDll>
<SLE66CMisc></SLE66CMisc>
<SLE66AMisc></SLE66AMisc>
<SLE66LinkerMisc></SLE66LinkerMisc>
<SFDFile></SFDFile>
<UseEnv>0</UseEnv>
<BinPath></BinPath>
<IncludePath></IncludePath>
<LibPath></LibPath>
<RegisterFilePath>Fujitsu\MB9BF50x\</RegisterFilePath>
<DBRegisterFilePath>Fujitsu\MB9BF50x\</DBRegisterFilePath>
<TargetStatus>
<Error>0</Error>
<ExitCodeStop>0</ExitCodeStop>
<ButtonStop>0</ButtonStop>
<NotGenerated>0</NotGenerated>
<InvalidFlash>1</InvalidFlash>
</TargetStatus>
<OutputDirectory>.\obj\</OutputDirectory>
<OutputName>rtthread-fm3</OutputName>
<CreateExecutable>1</CreateExecutable>
<CreateLib>0</CreateLib>
<CreateHexFile>0</CreateHexFile>
<DebugInformation>1</DebugInformation>
<BrowseInformation>0</BrowseInformation>
<ListingPath>.\obj\</ListingPath>
<HexFormatSelection>1</HexFormatSelection>
<Merge32K>0</Merge32K>
<CreateBatchFile>0</CreateBatchFile>
<BeforeCompile>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
</BeforeCompile>
<BeforeMake>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
</BeforeMake>
<AfterMake>
<RunUserProg1>0</RunUserProg1>
<RunUserProg2>0</RunUserProg2>
<UserProg1Name></UserProg1Name>
<UserProg2Name></UserProg2Name>
<UserProg1Dos16Mode>0</UserProg1Dos16Mode>
<UserProg2Dos16Mode>0</UserProg2Dos16Mode>
</AfterMake>
<SelectedForBatchBuild>0</SelectedForBatchBuild>
<SVCSIdString></SVCSIdString>
</TargetCommonOption>
<CommonProperty>
<UseCPPCompiler>0</UseCPPCompiler>
<RVCTCodeConst>0</RVCTCodeConst>
<RVCTZI>0</RVCTZI>
<RVCTOtherData>0</RVCTOtherData>
<ModuleSelection>0</ModuleSelection>
<IncludeInBuild>1</IncludeInBuild>
<AlwaysBuild>0</AlwaysBuild>
<GenerateAssemblyFile>0</GenerateAssemblyFile>
<AssembleAssemblyFile>0</AssembleAssemblyFile>
<PublicsOnly>0</PublicsOnly>
<StopOnExitCode>3</StopOnExitCode>
<CustomArgument></CustomArgument>
<IncludeLibraryModules></IncludeLibraryModules>
</CommonProperty>
<DllOption>
<SimDllName>SARMCM3.DLL</SimDllName>
<SimDllArguments>-MPU</SimDllArguments>
<SimDlgDll>DCM.DLL</SimDlgDll>
<SimDlgDllArguments>-pCM3</SimDlgDllArguments>
<TargetDllName>SARMCM3.DLL</TargetDllName>
<TargetDllArguments>-MPU</TargetDllArguments>
<TargetDlgDll>TCM.DLL</TargetDlgDll>
<TargetDlgDllArguments>-pCM3</TargetDlgDllArguments>
</DllOption>
<DebugOption>
<OPTHX>
<HexSelection>1</HexSelection>
<HexRangeLowAddress>0</HexRangeLowAddress>
<HexRangeHighAddress>0</HexRangeHighAddress>
<HexOffset>0</HexOffset>
<Oh166RecLen>16</Oh166RecLen>
</OPTHX>
<Simulator>
<UseSimulator>0</UseSimulator>
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
<RunToMain>1</RunToMain>
<RestoreBreakpoints>1</RestoreBreakpoints>
<RestoreWatchpoints>1</RestoreWatchpoints>
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
<RestoreFunctions>1</RestoreFunctions>
<RestoreToolbox>1</RestoreToolbox>
<LimitSpeedToRealTime>0</LimitSpeedToRealTime>
</Simulator>
<Target>
<UseTarget>1</UseTarget>
<LoadApplicationAtStartup>1</LoadApplicationAtStartup>
<RunToMain>1</RunToMain>
<RestoreBreakpoints>1</RestoreBreakpoints>
<RestoreWatchpoints>1</RestoreWatchpoints>
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
<RestoreFunctions>0</RestoreFunctions>
<RestoreToolbox>1</RestoreToolbox>
</Target>
<RunDebugAfterBuild>0</RunDebugAfterBuild>
<TargetSelection>7</TargetSelection>
<SimDlls>
<CpuDll></CpuDll>
<CpuDllArguments></CpuDllArguments>
<PeripheralDll></PeripheralDll>
<PeripheralDllArguments></PeripheralDllArguments>
<InitializationFile></InitializationFile>
</SimDlls>
<TargetDlls>
<CpuDll></CpuDll>
<CpuDllArguments></CpuDllArguments>
<PeripheralDll></PeripheralDll>
<PeripheralDllArguments></PeripheralDllArguments>
<InitializationFile></InitializationFile>
<Driver>Segger\JL2CM3.dll</Driver>
</TargetDlls>
</DebugOption>
<Utilities>
<Flash1>
<UseTargetDll>1</UseTargetDll>
<UseExternalTool>0</UseExternalTool>
<RunIndependent>0</RunIndependent>
<UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
<Capability>1</Capability>
<DriverSelection>4102</DriverSelection>
</Flash1>
<Flash2>Segger\JL2CM3.dll</Flash2>
<Flash3></Flash3>
<Flash4></Flash4>
</Utilities>
<TargetArmAds>
<ArmAdsMisc>
<GenerateListings>0</GenerateListings>
<asHll>1</asHll>
<asAsm>1</asAsm>
<asMacX>1</asMacX>
<asSyms>1</asSyms>
<asFals>1</asFals>
<asDbgD>1</asDbgD>
<asForm>1</asForm>
<ldLst>0</ldLst>
<ldmm>1</ldmm>
<ldXref>1</ldXref>
<BigEnd>0</BigEnd>
<AdsALst>1</AdsALst>
<AdsACrf>1</AdsACrf>
<AdsANop>0</AdsANop>
<AdsANot>0</AdsANot>
<AdsLLst>1</AdsLLst>
<AdsLmap>1</AdsLmap>
<AdsLcgr>1</AdsLcgr>
<AdsLsym>1</AdsLsym>
<AdsLszi>1</AdsLszi>
<AdsLtoi>1</AdsLtoi>
<AdsLsun>1</AdsLsun>
<AdsLven>1</AdsLven>
<AdsLsxf>1</AdsLsxf>
<RvctClst>0</RvctClst>
<GenPPlst>0</GenPPlst>
<AdsCpuType>"Cortex-M3"</AdsCpuType>
<RvctDeviceName></RvctDeviceName>
<mOS>0</mOS>
<uocRom>0</uocRom>
<uocRam>0</uocRam>
<hadIROM>1</hadIROM>
<hadIRAM>1</hadIRAM>
<hadXRAM>0</hadXRAM>
<uocXRam>0</uocXRam>
<RvdsVP>0</RvdsVP>
<hadIRAM2>0</hadIRAM2>
<hadIROM2>0</hadIROM2>
<StupSel>8</StupSel>
<useUlib>1</useUlib>
<EndSel>0</EndSel>
<uLtcg>0</uLtcg>
<RoSelD>3</RoSelD>
<RwSelD>3</RwSelD>
<CodeSel>0</CodeSel>
<OptFeed>0</OptFeed>
<NoZi1>0</NoZi1>
<NoZi2>0</NoZi2>
<NoZi3>0</NoZi3>
<NoZi4>0</NoZi4>
<NoZi5>0</NoZi5>
<Ro1Chk>0</Ro1Chk>
<Ro2Chk>0</Ro2Chk>
<Ro3Chk>0</Ro3Chk>
<Ir1Chk>1</Ir1Chk>
<Ir2Chk>0</Ir2Chk>
<Ra1Chk>0</Ra1Chk>
<Ra2Chk>0</Ra2Chk>
<Ra3Chk>0</Ra3Chk>
<Im1Chk>1</Im1Chk>
<Im2Chk>0</Im2Chk>
<OnChipMemories>
<Ocm1>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm1>
<Ocm2>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm2>
<Ocm3>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm3>
<Ocm4>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm4>
<Ocm5>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm5>
<Ocm6>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</Ocm6>
<IRAM>
<Type>0</Type>
<StartAddress>0x20000000</StartAddress>
<Size>0x4000</Size>
</IRAM>
<IROM>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x40000</Size>
</IROM>
<XRAM>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</XRAM>
<OCR_RVCT1>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT1>
<OCR_RVCT2>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT2>
<OCR_RVCT3>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT3>
<OCR_RVCT4>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x40000</Size>
</OCR_RVCT4>
<OCR_RVCT5>
<Type>1</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT5>
<OCR_RVCT6>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT6>
<OCR_RVCT7>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT7>
<OCR_RVCT8>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT8>
<OCR_RVCT9>
<Type>0</Type>
<StartAddress>0x20000000</StartAddress>
<Size>0x2000</Size>
</OCR_RVCT9>
<OCR_RVCT10>
<Type>0</Type>
<StartAddress>0x0</StartAddress>
<Size>0x0</Size>
</OCR_RVCT10>
</OnChipMemories>
<RvctStartVector></RvctStartVector>
</ArmAdsMisc>
<Cads>
<interw>1</interw>
<Optim>1</Optim>
<oTime>0</oTime>
<SplitLS>0</SplitLS>
<OneElfS>0</OneElfS>
<Strict>0</Strict>
<EnumInt>0</EnumInt>
<PlainCh>0</PlainCh>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<wLevel>0</wLevel>
<uThumb>0</uThumb>
<VariousControls>
<MiscControls></MiscControls>
<Define></Define>
<Undefine></Undefine>
<IncludePath>.\CMSIS;.;..\..\libcpu\arm\fm3;..\..\include</IncludePath>
</VariousControls>
</Cads>
<Aads>
<interw>1</interw>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<thumb>0</thumb>
<SplitLS>0</SplitLS>
<SwStkChk>0</SwStkChk>
<NoWarn>0</NoWarn>
<VariousControls>
<MiscControls></MiscControls>
<Define></Define>
<Undefine></Undefine>
<IncludePath></IncludePath>
</VariousControls>
</Aads>
<LDads>
<umfTarg>1</umfTarg>
<Ropi>0</Ropi>
<Rwpi>0</Rwpi>
<noStLib>0</noStLib>
<RepFail>1</RepFail>
<useFile>0</useFile>
<TextAddressRange>0x00000000</TextAddressRange>
<DataAddressRange>0x10000000</DataAddressRange>
<ScatterFile></ScatterFile>
<IncludeLibs></IncludeLibs>
<IncludeLibsPath></IncludeLibsPath>
<Misc></Misc>
<LinkerInputFile></LinkerInputFile>
<DisabledWarnings></DisabledWarnings>
</LDads>
</TargetArmAds>
</TargetOption>
<Groups>
<Group>
<GroupName>Startup</GroupName>
<Files>
<File>
<FileName>application.c</FileName>
<FileType>1</FileType>
<FilePath>.\application.c</FilePath>
</File>
<File>
<FileName>board.c</FileName>
<FileType>1</FileType>
<FilePath>.\board.c</FilePath>
</File>
<File>
<FileName>startup.c</FileName>
<FileType>1</FileType>
<FilePath>.\startup.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>Kernel</GroupName>
<Files>
<File>
<FileName>clock.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\clock.c</FilePath>
</File>
<File>
<FileName>device.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\device.c</FilePath>
</File>
<File>
<FileName>idle.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\idle.c</FilePath>
</File>
<File>
<FileName>ipc.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\ipc.c</FilePath>
</File>
<File>
<FileName>irq.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\irq.c</FilePath>
</File>
<File>
<FileName>kservice.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\kservice.c</FilePath>
</File>
<File>
<FileName>mem.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\mem.c</FilePath>
</File>
<File>
<FileName>mempool.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\mempool.c</FilePath>
</File>
<File>
<FileName>object.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\object.c</FilePath>
</File>
<File>
<FileName>scheduler.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\scheduler.c</FilePath>
</File>
<File>
<FileName>thread.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\thread.c</FilePath>
</File>
<File>
<FileName>timer.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\src\timer.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>FM3</GroupName>
<Files>
<File>
<FileName>context_rvds.S</FileName>
<FileType>2</FileType>
<FilePath>..\..\libcpu\arm\fm3\context_rvds.S</FilePath>
</File>
<File>
<FileName>fault_rvds.S</FileName>
<FileType>2</FileType>
<FilePath>..\..\libcpu\arm\fm3\fault_rvds.S</FilePath>
</File>
<File>
<FileName>start_rvds.S</FileName>
<FileType>2</FileType>
<FilePath>..\..\libcpu\arm\fm3\start_rvds.S</FilePath>
</File>
<File>
<FileName>cpuport.c</FileName>
<FileType>1</FileType>
<FilePath>..\..\libcpu\arm\fm3\cpuport.c</FilePath>
</File>
</Files>
</Group>
<Group>
<GroupName>CMSIS</GroupName>
<Files>
<File>
<FileName>core_cm3.c</FileName>
<FileType>1</FileType>
<FilePath>.\CMSIS\core_cm3.c</FilePath>
</File>
<File>
<FileName>system_mb9bf50x.c</FileName>
<FileType>1</FileType>
<FilePath>.\CMSIS\system_mb9bf50x.c</FilePath>
</File>
</Files>
</Group>
</Groups>
</Target>
</Targets>
</Project>
bsp/fm3/rtconfig.h 0 → 100644
浏览文件 @ 91577f18
/* RT-Thread config file */
#ifndef __RTTHREAD_CFG_H__
#define __RTTHREAD_CFG_H__
/* RT_NAME_MAX*/
#define RT_NAME_MAX 4
/* RT_ALIGN_SIZE*/
#define RT_ALIGN_SIZE 4
/* PRIORITY_MAX */
#define RT_THREAD_PRIORITY_MAX 32
/* Tick per Second */
#define RT_TICK_PER_SECOND 100
/* SECTION: RT_DEBUG */
/* Thread Debug */
#define RT_DEBUG
#define RT_USING_OVERFLOW_CHECK
/* Using Hook */
#define RT_USING_HOOK
/* SECTION: IPC */
/* Using Semaphore */
#define RT_USING_SEMAPHORE
/* Using Mutex */
#define RT_USING_MUTEX
/* Using Event */
#define RT_USING_EVENT
/* Using MailBox */
#define RT_USING_MAILBOX
/* Using Message Queue */
#define RT_USING_MESSAGEQUEUE
/* SECTION: Memory Management */
/* Using Memory Pool Management*/
#define RT_USING_MEMPOOL
/* Using Dynamic Heap Management */
#define RT_USING_HEAP
/* Using Small MM */
#define RT_USING_SMALL_MEM
/* SECTION: Device System */
/* Using Device System */
#define RT_USING_DEVICE
/* RT_USING_UART */
#define RT_USING_UART0
#define RT_UART_RX_BUFFER_SIZE 64
/* SECTION: Console options */
#define RT_TINY_SIZE
#define RT_USING_CONSOLE
/* the buffer size of console */
#define RT_CONSOLEBUF_SIZE 128
#endif
bsp/fm3/startup.c 0 → 100644
浏览文件 @ 91577f18
/*
* File : startup.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009 - 2011, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2011-02-24 Bernard first implementation
*/
#include <rthw.h>
#include <rtthread.h>
#include "board.h"
/**
* @addtogroup FM3
*/
/*@{*/
extern int rt_application_init(void);
#ifdef __CC_ARM
extern int Image$$RW_IRAM1$$ZI$$Limit;
#elif __ICCARM__
#pragma section="HEAP"
#else
extern int __bss_end;
#endif
/**
* This function will startup RT-Thread RTOS.
*/
void rtthread_startup(void)
{
/* init board */
rt_hw_board_init();
/* show version */
rt_show_version();
/* init tick */
rt_system_tick_init();
/* init kernel object */
rt_system_object_init();
/* init timer system */
rt_system_timer_init();
#ifdef RT_USING_HEAP
#ifdef __CC_ARM
rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)0x10008000);
#elif __ICCARM__
rt_system_heap_init(__segment_end("HEAP"), (void*)0x10008000);
#else
/* init memory system */
rt_system_heap_init((void*)&__bss_end, (void*)0x10008000);
#endif
#endif
/* init scheduler system */
rt_system_scheduler_init();
#ifdef RT_USING_DEVICE
/* init all device */
rt_device_init_all();
#endif
/* init application */
rt_application_init();
/* init timer thread */
rt_system_timer_thread_init();
/* init idle thread */
rt_thread_idle_init();
/* start scheduler */
rt_system_scheduler_start();
/* never reach here */
return ;
}
int main(void)
{
rt_uint32_t UNUSED level;
/* disable interrupt first */
level = rt_hw_interrupt_disable();
/* startup RT-Thread RTOS */
rtthread_startup();
return 0;
}
/*@}*/
libcpu/arm/fm3/context_gcc.S 0 → 100644
浏览文件 @ 91577f18
/*
* File : context_gcc.S
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-10-11 Bernard first version
*/
/**
* @addtogroup STM32
*/
/*@{*/
.cpu cortex-m3
.fpu softvfp
.syntax unified
.thumb
.text
.equ NVIC_INT_CTRL, 0xE000ED04 /* interrupt control state register */
.equ NVIC_SYSPRI2, 0xE000ED20 /* system priority register (2) */
.equ NVIC_PENDSV_PRI, 0x00FF0000 /* PendSV priority value (lowest) */
.equ NVIC_PENDSVSET, 0x10000000 /* value to trigger PendSV exception */
/*
* rt_base_t rt_hw_interrupt_disable();
*/
.global rt_hw_interrupt_disable
.type rt_hw_interrupt_disable, %function
rt_hw_interrupt_disable:
MRS r0, PRIMASK
CPSID I
BX LR
/*
* void rt_hw_interrupt_enable(rt_base_t level);
*/
.global rt_hw_interrupt_enable
.type rt_hw_interrupt_enable, %function
rt_hw_interrupt_enable:
MSR PRIMASK, r0
BX LR
/*
* void rt_hw_context_switch(rt_uint32 from, rt_uint32 to);
* r0 --> from
* r1 --> to
*/
.global rt_hw_context_switch_interrupt
.type rt_hw_context_switch_interrupt, %function
.global rt_hw_context_switch
.type rt_hw_context_switch, %function
rt_hw_context_switch_interrupt:
rt_hw_context_switch:
/* set rt_thread_switch_interrput_flag to 1 */
LDR r2, =rt_thread_switch_interrput_flag
LDR r3, [r2]
CMP r3, #1
BEQ _reswitch
MOV r3, #1
STR r3, [r2]
LDR r2, =rt_interrupt_from_thread /* set rt_interrupt_from_thread */
STR r0, [r2]
_reswitch:
LDR r2, =rt_interrupt_to_thread /* set rt_interrupt_to_thread */
STR r1, [r2]
LDR r0, =NVIC_INT_CTRL /* trigger the PendSV exception (causes context switch) */
LDR r1, =NVIC_PENDSVSET
STR r1, [r0]
BX LR
/* r0 --> swith from thread stack
* r1 --> swith to thread stack
* psr, pc, lr, r12, r3, r2, r1, r0 are pushed into [from] stack
*/
.global rt_hw_pend_sv
.type rt_hw_pend_sv, %function
rt_hw_pend_sv:
/* disable interrupt to protect context switch */
MRS r2, PRIMASK
CPSID I
/* get rt_thread_switch_interrupt_flag */
LDR r0, =rt_thread_switch_interrput_flag
LDR r1, [r0]
CBZ r1, pendsv_exit /* pendsv already handled */
/* clear rt_thread_switch_interrput_flag to 0 */
MOV r1, #0x00
STR r1, [r0]
LDR r0, =rt_interrupt_from_thread
LDR r1, [r0]
CBZ r1, swtich_to_thread /* skip register save at the first time */
MRS r1, psp /* get from thread stack pointer */
STMFD r1!, {r4 - r11} /* push r4 - r11 register */
LDR r0, [r0]
STR r1, [r0] /* update from thread stack pointer */
swtich_to_thread:
LDR r1, =rt_interrupt_to_thread
LDR r1, [r1]
LDR r1, [r1] /* load thread stack pointer */
LDMFD r1!, {r4 - r11} /* pop r4 - r11 register */
MSR psp, r1 /* update stack pointer */
pendsv_exit:
/* restore interrupt */
MSR PRIMASK, r2
ORR lr, lr, #0x04
BX lr
/*
* void rt_hw_context_switch_to(rt_uint32 to);
* r0 --> to
*/
.global rt_hw_context_switch_to
.type rt_hw_context_switch_to, %function
rt_hw_context_switch_to:
LDR r1, =rt_interrupt_to_thread
STR r0, [r1]
/* set from thread to 0 */
LDR r1, =rt_interrupt_from_thread
MOV r0, #0x0
STR r0, [r1]
/* set interrupt flag to 1 */
LDR r1, =rt_thread_switch_interrput_flag
MOV r0, #1
STR r0, [r1]
/* set the PendSV exception priority */
LDR r0, =NVIC_SYSPRI2
LDR r1, =NVIC_PENDSV_PRI
LDR.W r2, [r0,#0x00] /* read */
ORR r1,r1,r2 /* modify */
STR r1, [r0] /* write-back */
LDR r0, =NVIC_INT_CTRL /* trigger the PendSV exception (causes context switch) */
LDR r1, =NVIC_PENDSVSET
STR r1, [r0]
CPSIE I /* enable interrupts at processor level */
/* never reach here! */
/* compatible with old version */
.global rt_hw_interrupt_thread_switch
.type rt_hw_interrupt_thread_switch, %function
rt_hw_interrupt_thread_switch:
BX lr
NOP
libcpu/arm/fm3/context_iar.S 0 → 100644
浏览文件 @ 91577f18
;/*
; * File : context_iar.S
; * This file is part of RT-Thread RTOS
; * COPYRIGHT (C) 2009, RT-Thread Development Team
; *
; * The license and distribution terms for this file may be
; * found in the file LICENSE in this distribution or at
; * http://www.rt-thread.org/license/LICENSE
; *
; * Change Logs:
; * Date Author Notes
; * 2009-01-17 Bernard first version
; * 2009-09-27 Bernard add protect when contex switch occurs
; */
;/**
; * @addtogroup STM32
; */
;/*@{*/
NVIC_INT_CTRL EQU 0xE000ED04 ; interrupt control state register
NVIC_SYSPRI2 EQU 0xE000ED20 ; system priority register (2)
NVIC_PENDSV_PRI EQU 0x00FF0000 ; PendSV priority value (lowest)
NVIC_PENDSVSET EQU 0x10000000 ; value to trigger PendSV exception
SECTION .text:CODE(2)
THUMB
REQUIRE8
PRESERVE8
IMPORT rt_thread_switch_interrput_flag
IMPORT rt_interrupt_from_thread
IMPORT rt_interrupt_to_thread
;/*
; * rt_base_t rt_hw_interrupt_disable();
; */
EXPORT rt_hw_interrupt_disable
rt_hw_interrupt_disable:
MRS r0, PRIMASK
CPSID I
BX LR
;/*
; * void rt_hw_interrupt_enable(rt_base_t level);
; */
EXPORT rt_hw_interrupt_enable
rt_hw_interrupt_enable:
MSR PRIMASK, r0
BX LR
;/*
; * void rt_hw_context_switch(rt_uint32 from, rt_uint32 to);
; * r0 --> from
; * r1 --> to
; */
EXPORT rt_hw_context_switch_interrupt
EXPORT rt_hw_context_switch
rt_hw_context_switch_interrupt:
rt_hw_context_switch:
; set rt_thread_switch_interrput_flag to 1
LDR r2, =rt_thread_switch_interrput_flag
LDR r3, [r2]
CMP r3, #1
BEQ _reswitch
MOV r3, #1
STR r3, [r2]
LDR r2, =rt_interrupt_from_thread ; set rt_interrupt_from_thread
STR r0, [r2]
_reswitch
LDR r2, =rt_interrupt_to_thread ; set rt_interrupt_to_thread
STR r1, [r2]
LDR r0, =NVIC_INT_CTRL ; trigger the PendSV exception (causes context switch)
LDR r1, =NVIC_PENDSVSET
STR r1, [r0]
BX LR
; r0 --> swith from thread stack
; r1 --> swith to thread stack
; psr, pc, lr, r12, r3, r2, r1, r0 are pushed into [from] stack
EXPORT rt_hw_pend_sv
rt_hw_pend_sv:
; disable interrupt to protect context switch
MRS r2, PRIMASK
CPSID I
; get rt_thread_switch_interrupt_flag
LDR r0, =rt_thread_switch_interrput_flag
LDR r1, [r0]
CBZ r1, pendsv_exit ; pendsv already handled
; clear rt_thread_switch_interrput_flag to 0
MOV r1, #0x00
STR r1, [r0]
LDR r0, =rt_interrupt_from_thread
LDR r1, [r0]
CBZ r1, swtich_to_thread ; skip register save at the first time
MRS r1, psp ; get from thread stack pointer
STMFD r1!, {r4 - r11} ; push r4 - r11 register
LDR r0, [r0]
STR r1, [r0] ; update from thread stack pointer
swtich_to_thread
LDR r1, =rt_interrupt_to_thread
LDR r1, [r1]
LDR r1, [r1] ; load thread stack pointer
LDMFD r1!, {r4 - r11} ; pop r4 - r11 register
MSR psp, r1 ; update stack pointer
pendsv_exit
; restore interrupt
MSR PRIMASK, r2
ORR lr, lr, #0x04
BX lr
;/*
; * void rt_hw_context_switch_to(rt_uint32 to);
; * r0 --> to
; */
EXPORT rt_hw_context_switch_to
rt_hw_context_switch_to:
LDR r1, =rt_interrupt_to_thread
STR r0, [r1]
; set from thread to 0
LDR r1, =rt_interrupt_from_thread
MOV r0, #0x0
STR r0, [r1]
; set interrupt flag to 1
LDR r1, =rt_thread_switch_interrput_flag
MOV r0, #1
STR r0, [r1]
; set the PendSV exception priority
LDR r0, =NVIC_SYSPRI2
LDR r1, =NVIC_PENDSV_PRI
LDR.W r2, [r0,#0x00] ; read
ORR r1,r1,r2 ; modify
STR r1, [r0] ; write-back
LDR r0, =NVIC_INT_CTRL ; trigger the PendSV exception (causes context switch)
LDR r1, =NVIC_PENDSVSET
STR r1, [r0]
CPSIE I ; enable interrupts at processor level
; never reach here!
; compatible with old version
EXPORT rt_hw_interrupt_thread_switch
rt_hw_interrupt_thread_switch:
BX lr
END
libcpu/arm/fm3/context_rvds.S 0 → 100644
浏览文件 @ 91577f18
;/*
; * File : context_rvds.S
; * This file is part of RT-Thread RTOS
; * COPYRIGHT (C) 2009 - 2011, RT-Thread Development Team
; *
; * The license and distribution terms for this file may be
; * found in the file LICENSE in this distribution or at
; * http://www.rt-thread.org/license/LICENSE
; *
; * Change Logs:
; * Date Author Notes
; * 2011-02-23 Bernard first version
; */
NVIC_INT_CTRL EQU 0xE000ED04 ; interrupt control state register
NVIC_SYSPRI2 EQU 0xE000ED20 ; system priority register (2)
NVIC_PENDSV_PRI EQU 0x00FF0000 ; PendSV priority value (lowest)
NVIC_PENDSVSET EQU 0x10000000 ; value to trigger PendSV exception
AREA |.text|, CODE, READONLY, ALIGN=2
THUMB
REQUIRE8
PRESERVE8
IMPORT rt_thread_switch_interrput_flag
IMPORT rt_interrupt_from_thread
IMPORT rt_interrupt_to_thread
;/*
; * rt_base_t rt_hw_interrupt_disable();
; */
rt_hw_interrupt_disable PROC
EXPORT rt_hw_interrupt_disable
MRS r0, PRIMASK
CPSID I
BX LR
ENDP
;/*
; * void rt_hw_interrupt_enable(rt_base_t level);
; */
rt_hw_interrupt_enable PROC
EXPORT rt_hw_interrupt_enable
MSR PRIMASK, r0
BX LR
ENDP
;/*
; * void rt_hw_context_switch(rt_uint32 from, rt_uint32 to);
; * r0 --> from
; * r1 --> to
; */
rt_hw_context_switch_interrupt
EXPORT rt_hw_context_switch_interrupt
rt_hw_context_switch PROC
EXPORT rt_hw_context_switch
; set rt_thread_switch_interrput_flag to 1
LDR r2, =rt_thread_switch_interrput_flag
LDR r3, [r2]
CMP r3, #1
BEQ _reswitch
MOV r3, #1
STR r3, [r2]
LDR r2, =rt_interrupt_from_thread ; set rt_interrupt_from_thread
STR r0, [r2]
_reswitch
LDR r2, =rt_interrupt_to_thread ; set rt_interrupt_to_thread
STR r1, [r2]
LDR r0, =NVIC_INT_CTRL ; trigger the PendSV exception (causes context switch)
LDR r1, =NVIC_PENDSVSET
STR r1, [r0]
BX LR
ENDP
; r0 --> swith from thread stack
; r1 --> swith to thread stack
; psr, pc, lr, r12, r3, r2, r1, r0 are pushed into [from] stack
rt_hw_pend_sv PROC
EXPORT rt_hw_pend_sv
; disable interrupt to protect context switch
MRS r2, PRIMASK
CPSID I
; get rt_thread_switch_interrupt_flag
LDR r0, =rt_thread_switch_interrput_flag
LDR r1, [r0]
CBZ r1, pendsv_exit ; pendsv already handled
; clear rt_thread_switch_interrput_flag to 0
MOV r1, #0x00
STR r1, [r0]
LDR r0, =rt_interrupt_from_thread
LDR r1, [r0]
CBZ r1, swtich_to_thread ; skip register save at the first time
MRS r1, psp ; get from thread stack pointer
STMFD r1!, {r4 - r11} ; push r4 - r11 register
LDR r0, [r0]
STR r1, [r0] ; update from thread stack pointer
swtich_to_thread
LDR r1, =rt_interrupt_to_thread
LDR r1, [r1]
LDR r1, [r1] ; load thread stack pointer
LDMFD r1!, {r4 - r11} ; pop r4 - r11 register
MSR psp, r1 ; update stack pointer
pendsv_exit
; restore interrupt
MSR PRIMASK, r2
ORR lr, lr, #0x04
BX lr
ENDP
;/*
; * void rt_hw_context_switch_to(rt_uint32 to);
; * r0 --> to
; * this fucntion is used to perform the first thread switch
; */
rt_hw_context_switch_to PROC
EXPORT rt_hw_context_switch_to
; set to thread
LDR r1, =rt_interrupt_to_thread
STR r0, [r1]
; set from thread to 0
LDR r1, =rt_interrupt_from_thread
MOV r0, #0x0
STR r0, [r1]
; set interrupt flag to 1
LDR r1, =rt_thread_switch_interrput_flag
MOV r0, #1
STR r0, [r1]
; set the PendSV exception priority
LDR r0, =NVIC_SYSPRI2
LDR r1, =NVIC_PENDSV_PRI
LDR.W r2, [r0,#0x00] ; read
ORR r1,r1,r2 ; modify
STR r1, [r0] ; write-back
; trigger the PendSV exception (causes context switch)
LDR r0, =NVIC_INT_CTRL
LDR r1, =NVIC_PENDSVSET
STR r1, [r0]
; enable interrupts at processor level
CPSIE I
; never reach here!
ENDP
END
libcpu/arm/fm3/cpuport.c 0 → 100644
浏览文件 @ 91577f18
/*
* File : hwport.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009 - 2011, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2011-02-23 Bernard the first version
*/
#include <rthw.h>
#include <rtthread.h>
#include <mb9bf506r.h>
#include <core_cm3.h>
/* switch flag on interrupt and thread pointer to save switch record */
rt_uint32_t rt_interrupt_from_thread, rt_interrupt_to_thread;
rt_uint32_t rt_thread_switch_interrput_flag;
/* stack context in ARM Cortex-M3 */
struct stack_context
{
rt_uint32_t r0;
rt_uint32_t r1;
rt_uint32_t r2;
rt_uint32_t r3;
rt_uint32_t r12;
rt_uint32_t lr;
rt_uint32_t pc;
rt_uint32_t psr;
};
extern void rt_hw_interrupt_thread_switch(void);
extern void list_thread(void);
extern rt_thread_t rt_current_thread;
void rt_hw_hard_fault_exception(struct stack_context* contex)
{
rt_kprintf("psr: 0x%08x\n", contex->psr);
rt_kprintf(" pc: 0x%08x\n", contex->pc);
rt_kprintf(" lr: 0x%08x\n", contex->lr);
rt_kprintf("r12: 0x%08x\n", contex->r12);
rt_kprintf("r03: 0x%08x\n", contex->r3);
rt_kprintf("r02: 0x%08x\n", contex->r2);
rt_kprintf("r01: 0x%08x\n", contex->r1);
rt_kprintf("r00: 0x%08x\n", contex->r0);
if (rt_current_thread != RT_NULL)
{
rt_kprintf("hard fault on thread: %s\n", rt_current_thread->name);
#ifdef RT_USING_FINSH
list_thread();
#endif
while (1);
}
else
{
rt_kprintf("hard fault on initialization\n");
}
}
/**
* reset MCU
*
*/
void rt_hw_cpu_reset()
{
NVIC_SystemReset();
}
/**
* shutdown CPU
*
*/
void rt_hw_cpu_shutdown()
{
rt_kprintf("shutdown...\n");
RT_ASSERT(0);
}
/**
* This function will initialize thread stack
*
* @param tentry the entry of thread
* @param parameter the parameter of entry
* @param stack_addr the beginning stack address
* @param texit the function will be called when thread exit
*
* @return stack address
*/
rt_uint8_t *rt_hw_stack_init(void *tentry, void *parameter,
rt_uint8_t *stack_addr, void *texit)
{
unsigned long *stk;
stk = (unsigned long *)stack_addr;
*(stk) = 0x01000000L; /* PSR */
*(--stk) = (unsigned long)tentry; /* entry point, pc */
*(--stk) = (unsigned long)texit; /* lr */
*(--stk) = 0; /* r12 */
*(--stk) = 0; /* r3 */
*(--stk) = 0; /* r2 */
*(--stk) = 0; /* r1 */
*(--stk) = (unsigned long)parameter; /* r0 : argument */
*(--stk) = 0; /* r11 */
*(--stk) = 0; /* r10 */
*(--stk) = 0; /* r9 */
*(--stk) = 0; /* r8 */
*(--stk) = 0; /* r7 */
*(--stk) = 0; /* r6 */
*(--stk) = 0; /* r5 */
*(--stk) = 0; /* r4 */
/* return task's current stack address */
return (rt_uint8_t *)stk;
}
libcpu/arm/fm3/fault_gcc.S 0 → 100644
浏览文件 @ 91577f18
/*
* File : fault_gcc.S
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009, RT-Thread Development Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2009-10-11 Bernard first version
*/
.cpu cortex-m3
.fpu softvfp
.syntax unified
.thumb
.text
.global rt_hw_hard_fault
.type rt_hw_hard_fault, %function
rt_hw_hard_fault:
/* get current context */
MRS r0, psp /* get fault thread stack pointer */
PUSH {lr}
BL rt_hw_hard_fault_exception
POP {lr}
ORR lr, lr, #0x04
BX lr
libcpu/arm/fm3/fault_iar.S 0 → 100644
浏览文件 @ 91577f18
;/*
; * File : fault_iar.S
; * This file is part of RT-Thread RTOS
; * COPYRIGHT (C) 2009, RT-Thread Development Team
; *
; * The license and distribution terms for this file may be
; * found in the file LICENSE in this distribution or at
; * http://www.rt-thread.org/license/LICENSE
; *
; * Change Logs:
; * Date Author Notes
; * 2009-01-17 Bernard first version
; */
SECTION .text:CODE(2)
THUMB
REQUIRE8
PRESERVE8
IMPORT rt_hw_hard_fault_exception
EXPORT rt_hw_hard_fault
rt_hw_hard_fault:
; get current context
MRS r0, psp ; get fault thread stack pointer
PUSH {lr}
BL rt_hw_hard_fault_exception
POP {lr}
ORR lr, lr, #0x04
BX lr
END
libcpu/arm/fm3/fault_rvds.S 0 → 100644
浏览文件 @ 91577f18
;/*
; * File : fault_rvds.S
; * This file is part of RT-Thread RTOS
; * COPYRIGHT (C) 2009 - 2011, RT-Thread Development Team
; *
; * The license and distribution terms for this file may be
; * found in the file LICENSE in this distribution or at
; * http://www.rt-thread.org/license/LICENSE
; *
; * Change Logs:
; * Date Author Notes
; * 2011-02-23 Bernard first version
; */
AREA |.text|, CODE, READONLY, ALIGN=2
THUMB
REQUIRE8
PRESERVE8
IMPORT rt_hw_hard_fault_exception
rt_hw_hard_fault PROC
EXPORT rt_hw_hard_fault
; get current context
MRS r0, psp ; get fault thread stack pointer
PUSH {lr}
BL rt_hw_hard_fault_exception
POP {lr}
ORR lr, lr, #0x04
BX lr
ENDP
END
libcpu/arm/fm3/start_gcc.S 0 → 100644
浏览文件 @ 91577f18
/**
******************************************************************************
* @file startup_stm32f10x_hd.s
* @author MCD Application Team
* @version V3.1.2
* @date 09/28/2009
* @brief STM32F10x High Density Devices vector table for RIDE7 toolchain.
* This module performs:
* - Set the initial SP
* - Set the initial PC == Reset_Handler,
* - Set the vector table entries with the exceptions ISR address,
* - Configure external SRAM mounted on STM3210E-EVAL board
* to be used as data memory (optional, to be enabled by user)
* - Branches to main in the C library (which eventually
* calls main()).
* After Reset the Cortex-M3 processor is in Thread mode,
* priority is Privileged, and the Stack is set to Main.
******************************************************************************
* @copy
*
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
*
* <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
*/
.section .bss.init
.equ Stack_Size, 0x00000200
.space Stack_Size
Initial_spTop:
.syntax unified
.cpu cortex-m3
.fpu softvfp
.thumb
.global g_pfnVectors
.global Default_Handler
/* start address for the initialization values of the .data section.
defined in linker script */
.word _sidata
/* start address for the .data section. defined in linker script */
.word _sdata
/* end address for the .data section. defined in linker script */
.word _edata
/* start address for the .bss section. defined in linker script */
.word _sbss
/* end address for the .bss section. defined in linker script */
.word _ebss
// .equ Initial_spTop, 0x20000200
.equ BootRAM, 0xF1E0F85F
/**
* @brief This is the code that gets called when the processor first
* starts execution following a reset event. Only the absolutely
* necessary set is performed, after which the application
* supplied main() routine is called.
* @param None
* @retval : None
*/
.section .text.Reset_Handler
.weak Reset_Handler
.type Reset_Handler, %function
Reset_Handler:
/* restore original stack pointer */
LDR r0, =Initial_spTop
MSR msp, r0
/* Copy the data segment initializers from flash to SRAM */
movs r1, #0
b LoopCopyDataInit
CopyDataInit:
ldr r3, =_sidata
ldr r3, [r3, r1]
str r3, [r0, r1]
adds r1, r1, #4
LoopCopyDataInit:
ldr r0, =_sdata
ldr r3, =_edata
adds r2, r0, r1
cmp r2, r3
bcc CopyDataInit
ldr r2, =_sbss
b LoopFillZerobss
/* Zero fill the bss segment. */
FillZerobss:
movs r3, #0
str r3, [r2], #4
LoopFillZerobss:
ldr r3, = _ebss
cmp r2, r3
bcc FillZerobss
/* Call the application's entry point.*/
bl main
bx lr
.size Reset_Handler, .-Reset_Handler
/**
* @brief This is the code that gets called when the processor receives an
* unexpected interrupt. This simply enters an infinite loop, preserving
* the system state for examination by a debugger.
*
* @param None
* @retval : None
*/
.section .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
b Infinite_Loop
.size Default_Handler, .-Default_Handler
/******************************************************************************
*
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/
.section .isr_vector,"a",%progbits
.type g_pfnVectors, %object
.size g_pfnVectors, .-g_pfnVectors
g_pfnVectors:
.word Initial_spTop
.word Reset_Handler
.word NMI_Handler
.word rt_hw_hard_fault
.word MemManage_Handler
.word BusFault_Handler
.word UsageFault_Handler
.word 0
.word 0
.word 0
.word 0
.word SVC_Handler
.word DebugMon_Handler
.word 0
.word rt_hw_pend_sv
.word rt_hw_timer_handler
.word WWDG_IRQHandler
.word PVD_IRQHandler
.word TAMPER_IRQHandler
.word RTC_IRQHandler
.word FLASH_IRQHandler
.word RCC_IRQHandler
.word EXTI0_IRQHandler
.word EXTI1_IRQHandler
.word EXTI2_IRQHandler
.word EXTI3_IRQHandler
.word EXTI4_IRQHandler
.word DMA1_Channel1_IRQHandler
.word DMA1_Channel2_IRQHandler
.word DMA1_Channel3_IRQHandler
.word DMA1_Channel4_IRQHandler
.word DMA1_Channel5_IRQHandler
.word DMA1_Channel6_IRQHandler
.word DMA1_Channel7_IRQHandler
.word ADC1_2_IRQHandler
.word USB_HP_CAN1_TX_IRQHandler
.word USB_LP_CAN1_RX0_IRQHandler
.word CAN1_RX1_IRQHandler
.word CAN1_SCE_IRQHandler
.word EXTI9_5_IRQHandler
.word TIM1_BRK_IRQHandler
.word TIM1_UP_IRQHandler
.word TIM1_TRG_COM_IRQHandler
.word TIM1_CC_IRQHandler
.word TIM2_IRQHandler
.word TIM3_IRQHandler
.word TIM4_IRQHandler
.word I2C1_EV_IRQHandler
.word I2C1_ER_IRQHandler
.word I2C2_EV_IRQHandler
.word I2C2_ER_IRQHandler
.word SPI1_IRQHandler
.word SPI2_IRQHandler
.word USART1_IRQHandler
.word USART2_IRQHandler
.word USART3_IRQHandler
.word EXTI15_10_IRQHandler
.word RTCAlarm_IRQHandler
.word USBWakeUp_IRQHandler
.word TIM8_BRK_IRQHandler
.word TIM8_UP_IRQHandler
.word TIM8_TRG_COM_IRQHandler
.word TIM8_CC_IRQHandler
.word ADC3_IRQHandler
.word FSMC_IRQHandler
.word SDIO_IRQHandler
.word TIM5_IRQHandler
.word SPI3_IRQHandler
.word UART4_IRQHandler
.word UART5_IRQHandler
.word TIM6_IRQHandler
.word TIM7_IRQHandler
.word DMA2_Channel1_IRQHandler
.word DMA2_Channel2_IRQHandler
.word DMA2_Channel3_IRQHandler
.word DMA2_Channel4_5_IRQHandler
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word 0
.word BootRAM /* @0x1E0. This is for boot in RAM mode for
STM32F10x High Density devices. */
/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler.
* As they are weak aliases, any function with the same name will override
* this definition.
*
*******************************************************************************/
.weak NMI_Handler
.thumb_set NMI_Handler,Default_Handler
.weak MemManage_Handler
.thumb_set MemManage_Handler,Default_Handler
.weak BusFault_Handler
.thumb_set BusFault_Handler,Default_Handler
.weak UsageFault_Handler
.thumb_set UsageFault_Handler,Default_Handler
.weak SVC_Handler
.thumb_set SVC_Handler,Default_Handler
.weak DebugMon_Handler
.thumb_set DebugMon_Handler,Default_Handler
.weak WWDG_IRQHandler
.thumb_set WWDG_IRQHandler,Default_Handler
.weak PVD_IRQHandler
.thumb_set PVD_IRQHandler,Default_Handler
.weak TAMPER_IRQHandler
.thumb_set TAMPER_IRQHandler,Default_Handler
.weak RTC_IRQHandler
.thumb_set RTC_IRQHandler,Default_Handler
.weak FLASH_IRQHandler
.thumb_set FLASH_IRQHandler,Default_Handler
.weak RCC_IRQHandler
.thumb_set RCC_IRQHandler,Default_Handler
.weak EXTI0_IRQHandler
.thumb_set EXTI0_IRQHandler,Default_Handler
.weak EXTI1_IRQHandler
.thumb_set EXTI1_IRQHandler,Default_Handler
.weak EXTI2_IRQHandler
.thumb_set EXTI2_IRQHandler,Default_Handler
.weak EXTI3_IRQHandler
.thumb_set EXTI3_IRQHandler,Default_Handler
.weak EXTI4_IRQHandler
.thumb_set EXTI4_IRQHandler,Default_Handler
.weak DMA1_Channel1_IRQHandler
.thumb_set DMA1_Channel1_IRQHandler,Default_Handler
.weak DMA1_Channel2_IRQHandler
.thumb_set DMA1_Channel2_IRQHandler,Default_Handler
.weak DMA1_Channel3_IRQHandler
.thumb_set DMA1_Channel3_IRQHandler,Default_Handler
.weak DMA1_Channel4_IRQHandler
.thumb_set DMA1_Channel4_IRQHandler,Default_Handler
.weak DMA1_Channel5_IRQHandler
.thumb_set DMA1_Channel5_IRQHandler,Default_Handler
.weak DMA1_Channel6_IRQHandler
.thumb_set DMA1_Channel6_IRQHandler,Default_Handler
.weak DMA1_Channel7_IRQHandler
.thumb_set DMA1_Channel7_IRQHandler,Default_Handler
.weak ADC1_2_IRQHandler
.thumb_set ADC1_2_IRQHandler,Default_Handler
.weak USB_HP_CAN1_TX_IRQHandler
.thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler
.weak USB_LP_CAN1_RX0_IRQHandler
.thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler
.weak CAN1_RX1_IRQHandler
.thumb_set CAN1_RX1_IRQHandler,Default_Handler
.weak CAN1_SCE_IRQHandler
.thumb_set CAN1_SCE_IRQHandler,Default_Handler
.weak EXTI9_5_IRQHandler
.thumb_set EXTI9_5_IRQHandler,Default_Handler
.weak TIM1_BRK_IRQHandler
.thumb_set TIM1_BRK_IRQHandler,Default_Handler
.weak TIM1_UP_IRQHandler
.thumb_set TIM1_UP_IRQHandler,Default_Handler
.weak TIM1_TRG_COM_IRQHandler
.thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler
.weak TIM1_CC_IRQHandler
.thumb_set TIM1_CC_IRQHandler,Default_Handler
.weak TIM2_IRQHandler
.thumb_set TIM2_IRQHandler,Default_Handler
.weak TIM3_IRQHandler
.thumb_set TIM3_IRQHandler,Default_Handler
.weak TIM4_IRQHandler
.thumb_set TIM4_IRQHandler,Default_Handler
.weak I2C1_EV_IRQHandler
.thumb_set I2C1_EV_IRQHandler,Default_Handler
.weak I2C1_ER_IRQHandler
.thumb_set I2C1_ER_IRQHandler,Default_Handler
.weak I2C2_EV_IRQHandler
.thumb_set I2C2_EV_IRQHandler,Default_Handler
.weak I2C2_ER_IRQHandler
.thumb_set I2C2_ER_IRQHandler,Default_Handler
.weak SPI1_IRQHandler
.thumb_set SPI1_IRQHandler,Default_Handler
.weak SPI2_IRQHandler
.thumb_set SPI2_IRQHandler,Default_Handler
.weak USART1_IRQHandler
.thumb_set USART1_IRQHandler,Default_Handler
.weak USART2_IRQHandler
.thumb_set USART2_IRQHandler,Default_Handler
.weak USART3_IRQHandler
.thumb_set USART3_IRQHandler,Default_Handler
.weak EXTI15_10_IRQHandler
.thumb_set EXTI15_10_IRQHandler,Default_Handler
.weak RTCAlarm_IRQHandler
.thumb_set RTCAlarm_IRQHandler,Default_Handler
.weak USBWakeUp_IRQHandler
.thumb_set USBWakeUp_IRQHandler,Default_Handler
.weak TIM8_BRK_IRQHandler
.thumb_set TIM8_BRK_IRQHandler,Default_Handler
.weak TIM8_UP_IRQHandler
.thumb_set TIM8_UP_IRQHandler,Default_Handler
.weak TIM8_TRG_COM_IRQHandler
.thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler
.weak TIM8_CC_IRQHandler
.thumb_set TIM8_CC_IRQHandler,Default_Handler
.weak ADC3_IRQHandler
.thumb_set ADC3_IRQHandler,Default_Handler
.weak FSMC_IRQHandler
.thumb_set FSMC_IRQHandler,Default_Handler
.weak SDIO_IRQHandler
.thumb_set SDIO_IRQHandler,Default_Handler
.weak TIM5_IRQHandler
.thumb_set TIM5_IRQHandler,Default_Handler
.weak SPI3_IRQHandler
.thumb_set SPI3_IRQHandler,Default_Handler
.weak UART4_IRQHandler
.thumb_set UART4_IRQHandler,Default_Handler
.weak UART5_IRQHandler
.thumb_set UART5_IRQHandler,Default_Handler
.weak TIM6_IRQHandler
.thumb_set TIM6_IRQHandler,Default_Handler
.weak TIM7_IRQHandler
.thumb_set TIM7_IRQHandler,Default_Handler
.weak DMA2_Channel1_IRQHandler
.thumb_set DMA2_Channel1_IRQHandler,Default_Handler
.weak DMA2_Channel2_IRQHandler
.thumb_set DMA2_Channel2_IRQHandler,Default_Handler
.weak DMA2_Channel3_IRQHandler
.thumb_set DMA2_Channel3_IRQHandler,Default_Handler
.weak DMA2_Channel4_5_IRQHandler
.thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler
libcpu/arm/fm3/start_iar.S 0 → 100644
浏览文件 @ 91577f18
;/******************** (C) COPYRIGHT 2009 STMicroelectronics ********************
;* File Name : startup_stm32f10x_hd.s
;* Author : MCD Application Team
;* Version : V3.0.0
;* Date : 04/06/2009
;* Description : STM32F10x High Density Devices vector table for EWARM5.x
;* toolchain.
;* This module performs:
;* - Set the initial SP
;* - Set the initial PC == __iar_program_start,
;* - Set the vector table entries with the exceptions ISR address,
;* - Configure external SRAM mounted on STM3210E-EVAL board
;* to be used as data memory (optional, to be enabled by user)
;* After Reset the Cortex-M3 processor is in Thread mode,
;* priority is Privileged, and the Stack is set to Main.
;********************************************************************************
;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
;*******************************************************************************/
;
;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;
MODULE ?cstartup
;; ICODE is the same segment as cstartup. By placing __low_level_init
;; in the same segment, we make sure it can be reached with BL. */
SECTION CSTACK:DATA:NOROOT(3)
SECTION .icode:CODE:NOROOT(2)
IMPORT rt_hw_hard_fault
IMPORT rt_hw_pend_sv
IMPORT rt_hw_timer_handler
PUBLIC __low_level_init
PUBWEAK SystemInit_ExtMemCtl
SECTION .text:CODE:REORDER(2)
THUMB
SystemInit_ExtMemCtl
BX LR
__low_level_init:
;; Initialize hardware.
LDR R0, = SystemInit_ExtMemCtl ; initialize external memory controller
MOV R11, LR
BLX R0
LDR R1, =sfe(CSTACK) ; restore original stack pointer
MSR MSP, R1
MOV R0,#1
;; Return with BX to be independent of mode of caller
BX R11
;; Forward declaration of sections.
SECTION .intvec:CODE:NOROOT(2)
EXTERN __iar_program_start
PUBLIC __vector_table
DATA
__vector_table
DCD sfe(CSTACK)
DCD __iar_program_start
DCD NMI_Handler ; NMI Handler
DCD rt_hw_hard_fault ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD rt_hw_pend_sv ; PendSV Handler
DCD rt_hw_timer_handler ; SysTick Handler
; External Interrupts
DCD WWDG_IRQHandler ; Window Watchdog
DCD PVD_IRQHandler ; PVD through EXTI Line detect
DCD TAMPER_IRQHandler ; Tamper
DCD RTC_IRQHandler ; RTC
DCD FLASH_IRQHandler ; Flash
DCD RCC_IRQHandler ; RCC
DCD EXTI0_IRQHandler ; EXTI Line 0
DCD EXTI1_IRQHandler ; EXTI Line 1
DCD EXTI2_IRQHandler ; EXTI Line 2
DCD EXTI3_IRQHandler ; EXTI Line 3
DCD EXTI4_IRQHandler ; EXTI Line 4
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
DCD TIM1_BRK_IRQHandler ; TIM1 Break
DCD TIM1_UP_IRQHandler ; TIM1 Update
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
DCD TIM2_IRQHandler ; TIM2
DCD TIM3_IRQHandler ; TIM3
DCD TIM4_IRQHandler ; TIM4
DCD I2C1_EV_IRQHandler ; I2C1 Event
DCD I2C1_ER_IRQHandler ; I2C1 Error
DCD I2C2_EV_IRQHandler ; I2C2 Event
DCD I2C2_ER_IRQHandler ; I2C2 Error
DCD SPI1_IRQHandler ; SPI1
DCD SPI2_IRQHandler ; SPI2
DCD USART1_IRQHandler ; USART1
DCD USART2_IRQHandler ; USART2
DCD USART3_IRQHandler ; USART3
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line
DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup from suspend
DCD TIM8_BRK_IRQHandler ; TIM8 Break
DCD TIM8_UP_IRQHandler ; TIM8 Update
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
DCD ADC3_IRQHandler ; ADC3
DCD FSMC_IRQHandler ; FSMC
DCD SDIO_IRQHandler ; SDIO
DCD TIM5_IRQHandler ; TIM5
DCD SPI3_IRQHandler ; SPI3
DCD UART4_IRQHandler ; UART4
DCD UART5_IRQHandler ; UART5
DCD TIM6_IRQHandler ; TIM6
DCD TIM7_IRQHandler ; TIM7
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
; for STM32F10x Connectivity line devices
DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5
DCD ETH_IRQHandler ; Ethernet
DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line
DCD CAN2_TX_IRQHandler ; CAN2 TX
DCD CAN2_RX0_IRQHandler ; CAN2 RX0
DCD CAN2_RX1_IRQHandler ; CAN2 RX1
DCD CAN2_SCE_IRQHandler ; CAN2 SCE
DCD OTG_FS_IRQHandler ; USB OTG FS
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
THUMB
PUBWEAK NMI_Handler
SECTION .text:CODE:REORDER(1)
NMI_Handler
B NMI_Handler
PUBWEAK MemManage_Handler
SECTION .text:CODE:REORDER(1)
MemManage_Handler
B MemManage_Handler
PUBWEAK BusFault_Handler
SECTION .text:CODE:REORDER(1)
BusFault_Handler
B BusFault_Handler
PUBWEAK UsageFault_Handler
SECTION .text:CODE:REORDER(1)
UsageFault_Handler
B UsageFault_Handler
PUBWEAK SVC_Handler
SECTION .text:CODE:REORDER(1)
SVC_Handler
B SVC_Handler
PUBWEAK DebugMon_Handler
SECTION .text:CODE:REORDER(1)
DebugMon_Handler
B DebugMon_Handler
PUBWEAK WWDG_IRQHandler
SECTION .text:CODE:REORDER(1)
WWDG_IRQHandler
B WWDG_IRQHandler
PUBWEAK PVD_IRQHandler
SECTION .text:CODE:REORDER(1)
PVD_IRQHandler
B PVD_IRQHandler
PUBWEAK TAMPER_IRQHandler
SECTION .text:CODE:REORDER(1)
TAMPER_IRQHandler
B TAMPER_IRQHandler
PUBWEAK RTC_IRQHandler
SECTION .text:CODE:REORDER(1)
RTC_IRQHandler
B RTC_IRQHandler
PUBWEAK FLASH_IRQHandler
SECTION .text:CODE:REORDER(1)
FLASH_IRQHandler
B FLASH_IRQHandler
PUBWEAK RCC_IRQHandler
SECTION .text:CODE:REORDER(1)
RCC_IRQHandler
B RCC_IRQHandler
PUBWEAK EXTI0_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI0_IRQHandler
B EXTI0_IRQHandler
PUBWEAK EXTI1_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI1_IRQHandler
B EXTI1_IRQHandler
PUBWEAK EXTI2_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI2_IRQHandler
B EXTI2_IRQHandler
PUBWEAK EXTI3_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI3_IRQHandler
B EXTI3_IRQHandler
PUBWEAK EXTI4_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI4_IRQHandler
B EXTI4_IRQHandler
PUBWEAK DMA1_Channel1_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel1_IRQHandler
B DMA1_Channel1_IRQHandler
PUBWEAK DMA1_Channel2_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel2_IRQHandler
B DMA1_Channel2_IRQHandler
PUBWEAK DMA1_Channel3_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel3_IRQHandler
B DMA1_Channel3_IRQHandler
PUBWEAK DMA1_Channel4_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel4_IRQHandler
B DMA1_Channel4_IRQHandler
PUBWEAK DMA1_Channel5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel5_IRQHandler
B DMA1_Channel5_IRQHandler
PUBWEAK DMA1_Channel6_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel6_IRQHandler
B DMA1_Channel6_IRQHandler
PUBWEAK DMA1_Channel7_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA1_Channel7_IRQHandler
B DMA1_Channel7_IRQHandler
PUBWEAK ADC1_2_IRQHandler
SECTION .text:CODE:REORDER(1)
ADC1_2_IRQHandler
B ADC1_2_IRQHandler
PUBWEAK USB_HP_CAN1_TX_IRQHandler
SECTION .text:CODE:REORDER(1)
USB_HP_CAN1_TX_IRQHandler
B USB_HP_CAN1_TX_IRQHandler
PUBWEAK USB_LP_CAN1_RX0_IRQHandler
SECTION .text:CODE:REORDER(1)
USB_LP_CAN1_RX0_IRQHandler
B USB_LP_CAN1_RX0_IRQHandler
PUBWEAK CAN1_RX1_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN1_RX1_IRQHandler
B CAN1_RX1_IRQHandler
PUBWEAK CAN1_SCE_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN1_SCE_IRQHandler
B CAN1_SCE_IRQHandler
PUBWEAK EXTI9_5_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI9_5_IRQHandler
B EXTI9_5_IRQHandler
PUBWEAK TIM1_BRK_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_BRK_IRQHandler
B TIM1_BRK_IRQHandler
PUBWEAK TIM1_UP_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_UP_IRQHandler
B TIM1_UP_IRQHandler
PUBWEAK TIM1_TRG_COM_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_TRG_COM_IRQHandler
B TIM1_TRG_COM_IRQHandler
PUBWEAK TIM1_CC_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM1_CC_IRQHandler
B TIM1_CC_IRQHandler
PUBWEAK TIM2_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM2_IRQHandler
B TIM2_IRQHandler
PUBWEAK TIM3_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM3_IRQHandler
B TIM3_IRQHandler
PUBWEAK TIM4_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM4_IRQHandler
B TIM4_IRQHandler
PUBWEAK I2C1_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_EV_IRQHandler
B I2C1_EV_IRQHandler
PUBWEAK I2C1_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C1_ER_IRQHandler
B I2C1_ER_IRQHandler
PUBWEAK I2C2_EV_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C2_EV_IRQHandler
B I2C2_EV_IRQHandler
PUBWEAK I2C2_ER_IRQHandler
SECTION .text:CODE:REORDER(1)
I2C2_ER_IRQHandler
B I2C2_ER_IRQHandler
PUBWEAK SPI1_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI1_IRQHandler
B SPI1_IRQHandler
PUBWEAK SPI2_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI2_IRQHandler
B SPI2_IRQHandler
PUBWEAK USART1_IRQHandler
SECTION .text:CODE:REORDER(1)
USART1_IRQHandler
B USART1_IRQHandler
PUBWEAK USART2_IRQHandler
SECTION .text:CODE:REORDER(1)
USART2_IRQHandler
B USART2_IRQHandler
PUBWEAK USART3_IRQHandler
SECTION .text:CODE:REORDER(1)
USART3_IRQHandler
B USART3_IRQHandler
PUBWEAK EXTI15_10_IRQHandler
SECTION .text:CODE:REORDER(1)
EXTI15_10_IRQHandler
B EXTI15_10_IRQHandler
PUBWEAK RTCAlarm_IRQHandler
SECTION .text:CODE:REORDER(1)
RTCAlarm_IRQHandler
B RTCAlarm_IRQHandler
PUBWEAK OTG_FS_WKUP_IRQHandler
SECTION .text:CODE:REORDER(1)
OTG_FS_WKUP_IRQHandler
B OTG_FS_WKUP_IRQHandler
PUBWEAK TIM8_BRK_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM8_BRK_IRQHandler
B TIM8_BRK_IRQHandler
PUBWEAK TIM8_UP_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM8_UP_IRQHandler
B TIM8_UP_IRQHandler
PUBWEAK TIM8_TRG_COM_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM8_TRG_COM_IRQHandler
B TIM8_TRG_COM_IRQHandler
PUBWEAK TIM8_CC_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM8_CC_IRQHandler
B TIM8_CC_IRQHandler
PUBWEAK ADC3_IRQHandler
SECTION .text:CODE:REORDER(1)
ADC3_IRQHandler
B ADC3_IRQHandler
PUBWEAK FSMC_IRQHandler
SECTION .text:CODE:REORDER(1)
FSMC_IRQHandler
B FSMC_IRQHandler
PUBWEAK SDIO_IRQHandler
SECTION .text:CODE:REORDER(1)
SDIO_IRQHandler
B SDIO_IRQHandler
PUBWEAK TIM5_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM5_IRQHandler
B TIM5_IRQHandler
PUBWEAK SPI3_IRQHandler
SECTION .text:CODE:REORDER(1)
SPI3_IRQHandler
B SPI3_IRQHandler
PUBWEAK UART4_IRQHandler
SECTION .text:CODE:REORDER(1)
UART4_IRQHandler
B UART4_IRQHandler
PUBWEAK UART5_IRQHandler
SECTION .text:CODE:REORDER(1)
UART5_IRQHandler
B UART5_IRQHandler
PUBWEAK TIM6_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM6_IRQHandler
B TIM6_IRQHandler
PUBWEAK TIM7_IRQHandler
SECTION .text:CODE:REORDER(1)
TIM7_IRQHandler
B TIM7_IRQHandler
PUBWEAK DMA2_Channel1_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel1_IRQHandler
B DMA2_Channel1_IRQHandler
PUBWEAK DMA2_Channel2_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel2_IRQHandler
B DMA2_Channel2_IRQHandler
PUBWEAK DMA2_Channel3_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel3_IRQHandler
B DMA2_Channel3_IRQHandler
PUBWEAK DMA2_Channel4_5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel4_5_IRQHandler
B DMA2_Channel4_5_IRQHandler
; for STM32F10x Connectivity line devices
PUBWEAK DMA2_Channel5_IRQHandler
SECTION .text:CODE:REORDER(1)
DMA2_Channel5_IRQHandler
B DMA2_Channel5_IRQHandler
PUBWEAK ETH_IRQHandler
SECTION .text:CODE:REORDER(1)
ETH_IRQHandler
B ETH_IRQHandler
PUBWEAK ETH_WKUP_IRQHandler
SECTION .text:CODE:REORDER(1)
ETH_WKUP_IRQHandler
B ETH_WKUP_IRQHandler
PUBWEAK CAN2_TX_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN2_TX_IRQHandler
B CAN2_TX_IRQHandler
PUBWEAK CAN2_RX0_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN2_RX0_IRQHandler
B CAN2_RX0_IRQHandler
PUBWEAK CAN2_RX1_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN2_RX1_IRQHandler
B CAN2_RX1_IRQHandler
PUBWEAK CAN2_SCE_IRQHandler
SECTION .text:CODE:REORDER(1)
CAN2_SCE_IRQHandler
B CAN2_SCE_IRQHandler
PUBWEAK OTG_FS_IRQHandler
SECTION .text:CODE:REORDER(1)
OTG_FS_IRQHandler
B OTG_FS_IRQHandler
END
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/
libcpu/arm/fm3/start_rvds.S 0 → 100644
浏览文件 @ 91577f18
; /*
; * File : start_rvds.s
; * This file is part of RT-Thread RTOS
; * COPYRIGHT (C) 2009 - 2011, RT-Thread Development Team
; *
; * The license and distribution terms for this file may be
; * found in the file LICENSE in this distribution or at
; * http://www.rt-thread.org/license/LICENSE
; *
; * Change Logs:
; * Date Author Notes
; * 2011-02-23 Bernard first implementation
; */
;* <<< Use Configuration Wizard in Context Menu >>>
; Amount of memory (in bytes) allocated for Stack
; Tailor this value to your application needs
; <h> Stack Configuration
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
; </h>
Stack_Size EQU 0x00000200
AREA STACK, NOINIT, READWRITE, ALIGN=3
Stack_Mem SPACE Stack_Size
__initial_sp
; Note: RT-Thread not use malloc/free in Keil MDK, therefore the heap size is 0.
Heap_Size EQU 0x00000000
AREA HEAP, NOINIT, READWRITE, ALIGN=3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
IMPORT rt_hw_hard_fault
IMPORT rt_hw_pend_sv
IMPORT rt_hw_timer_handler
; Vector Table Mapped to Address 0 at Reset
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD rt_hw_hard_fault ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD rt_hw_pend_sv ; PendSV Handler
DCD rt_hw_timer_handler ; SysTick Handler
DCD CSV_Handler ; 0: Clock Super Visor
DCD SWDT_Handler ; 1: Software Watchdog Timer
DCD LVD_Handler ; 2: Low Voltage Detector
DCD MFT_WG_IRQHandler ; 3: Wave Form Generator / DTIF
DCD INT0_7_Handler ; 4: External Interrupt Request ch.0 to ch.7
DCD INT8_15_Handler ; 5: External Interrupt Request ch.8 to ch.15
DCD DT_Handler ; 6: Dual Timer / Quad Decoder
DCD MFS0RX_IRQHandler ; 7: MultiFunction Serial ch.0
DCD MFS0TX_IRQHandler ; 8: MultiFunction Serial ch.0
DCD MFS1RX_IRQHandler ; 9: MultiFunction Serial ch.1
DCD MFS1TX_IRQHandler ; 10: MultiFunction Serial ch.1
DCD MFS2RX_IRQHandler ; 11: MultiFunction Serial ch.2
DCD MFS2TX_IRQHandler ; 12: MultiFunction Serial ch.2
DCD MFS3RX_IRQHandler ; 13: MultiFunction Serial ch.3
DCD MFS3TX_IRQHandler ; 14: MultiFunction Serial ch.3
DCD MFS4RX_IRQHandler ; 15: MultiFunction Serial ch.4
DCD MFS4TX_IRQHandler ; 16: MultiFunction Serial ch.4
DCD MFS5RX_IRQHandler ; 17: MultiFunction Serial ch.5
DCD MFS5TX_IRQHandler ; 18: MultiFunction Serial ch.5
DCD MFS6RX_IRQHandler ; 19: MultiFunction Serial ch.6
DCD MFS6TX_IRQHandler ; 20: MultiFunction Serial ch.6
DCD MFS7RX_IRQHandler ; 21: MultiFunction Serial ch.7
DCD MFS7TX_IRQHandler ; 22: MultiFunction Serial ch.7
DCD PPG_Handler ; 23: PPG
DCD TIM_IRQHandler ; 24: OSC / PLL / Watch Counter
DCD ADC0_IRQHandler ; 25: ADC0
DCD ADC1_IRQHandler ; 26: ADC1
DCD ADC2_IRQHandler ; 27: ADC2
DCD MFT_FRT_IRQHandler ; 28: Free-run Timer
DCD MFT_IPC_IRQHandler ; 29: Input Capture
DCD MFT_OPC_IRQHandler ; 30: Output Compare
DCD BT_IRQHandler ; 31: Base Timer ch.0 to ch.7
DCD CAN0_IRQHandler ; 32: CAN ch.0
DCD CAN1_IRQHandler ; 33: CAN ch.1
DCD USBF_Handler ; 34: USB Function
DCD USB_Handler ; 35: USB Function / USB HOST
DCD DummyHandler ; 36: Reserved
DCD DummyHandler ; 37: Reserved
DCD DMAC0_Handler ; 38: DMAC ch.0
DCD DMAC1_Handler ; 39: DMAC ch.1
DCD DMAC2_Handler ; 40: DMAC ch.2
DCD DMAC3_Handler ; 41: DMAC ch.3
DCD DMAC4_Handler ; 42: DMAC ch.4
DCD DMAC5_Handler ; 43: DMAC ch.5
DCD DMAC6_Handler ; 44: DMAC ch.6
DCD DMAC7_Handler ; 45: DMAC ch.7
DCD DummyHandler ; 46: Reserved
DCD DummyHandler ; 47: Reserved
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
; Reset handler routine
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R1, = __initial_sp ; restore original stack pointer
MSR MSP, R1
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
; Dummy Exception Handlers (infinite loops which can be modified)
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler\
PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler\
PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler\
PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler\
PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler\
PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
Default_Handler PROC
EXPORT CSV_Handler [WEAK]
EXPORT SWDT_Handler [WEAK]
EXPORT LVD_Handler [WEAK]
EXPORT MFT_WG_IRQHandler [WEAK]
EXPORT INT0_7_Handler [WEAK]
EXPORT INT8_15_Handler [WEAK]
EXPORT DT_Handler [WEAK]
EXPORT MFS0RX_IRQHandler [WEAK]
EXPORT MFS0TX_IRQHandler [WEAK]
EXPORT MFS1RX_IRQHandler [WEAK]
EXPORT MFS1TX_IRQHandler [WEAK]
EXPORT MFS2RX_IRQHandler [WEAK]
EXPORT MFS2TX_IRQHandler [WEAK]
EXPORT MFS3RX_IRQHandler [WEAK]
EXPORT MFS3TX_IRQHandler [WEAK]
EXPORT MFS4RX_IRQHandler [WEAK]
EXPORT MFS4TX_IRQHandler [WEAK]
EXPORT MFS5RX_IRQHandler [WEAK]
EXPORT MFS5TX_IRQHandler [WEAK]
EXPORT MFS6RX_IRQHandler [WEAK]
EXPORT MFS6TX_IRQHandler [WEAK]
EXPORT MFS7RX_IRQHandler [WEAK]
EXPORT MFS7TX_IRQHandler [WEAK]
EXPORT PPG_Handler [WEAK]
EXPORT TIM_IRQHandler [WEAK]
EXPORT ADC0_IRQHandler [WEAK]
EXPORT ADC1_IRQHandler [WEAK]
EXPORT ADC2_IRQHandler [WEAK]
EXPORT MFT_FRT_IRQHandler [WEAK]
EXPORT MFT_IPC_IRQHandler [WEAK]
EXPORT MFT_OPC_IRQHandler [WEAK]
EXPORT BT_IRQHandler [WEAK]
EXPORT CAN0_IRQHandler [WEAK]
EXPORT CAN1_IRQHandler [WEAK]
EXPORT USBF_Handler [WEAK]
EXPORT USB_Handler [WEAK]
EXPORT DMAC0_Handler [WEAK]
EXPORT DMAC1_Handler [WEAK]
EXPORT DMAC2_Handler [WEAK]
EXPORT DMAC3_Handler [WEAK]
EXPORT DMAC4_Handler [WEAK]
EXPORT DMAC5_Handler [WEAK]
EXPORT DMAC6_Handler [WEAK]
EXPORT DMAC7_Handler [WEAK]
EXPORT DummyHandler [WEAK]
CSV_Handler
SWDT_Handler
LVD_Handler
MFT_WG_IRQHandler
INT0_7_Handler
INT8_15_Handler
DT_Handler
MFS0RX_IRQHandler
MFS0TX_IRQHandler
MFS1RX_IRQHandler
MFS1TX_IRQHandler
MFS2RX_IRQHandler
MFS2TX_IRQHandler
MFS3RX_IRQHandler
MFS3TX_IRQHandler
MFS4RX_IRQHandler
MFS4TX_IRQHandler
MFS5RX_IRQHandler
MFS5TX_IRQHandler
MFS6RX_IRQHandler
MFS6TX_IRQHandler
MFS7RX_IRQHandler
MFS7TX_IRQHandler
PPG_Handler
TIM_IRQHandler
ADC0_IRQHandler
ADC1_IRQHandler
ADC2_IRQHandler
MFT_FRT_IRQHandler
MFT_IPC_IRQHandler
MFT_OPC_IRQHandler
BT_IRQHandler
CAN0_IRQHandler
CAN1_IRQHandler
USBF_Handler
USB_Handler
DMAC0_Handler
DMAC1_Handler
DMAC2_Handler
DMAC3_Handler
DMAC4_Handler
DMAC5_Handler
DMAC6_Handler
DMAC7_Handler
DummyHandler
B .
ENDP
ALIGN
; User Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ALIGN
ENDIF
END
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或