/**
******************************************************************************
* @file stm32g0xx_hal_wwdg.c
* @author MCD Application Team
* @brief WWDG HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Window Watchdog (WWDG) peripheral:
* + Initialization and Configuration functions
* + IO operation functions
@verbatim
==============================================================================
##### WWDG Specific features #####
==============================================================================
[..]
Once enabled the WWDG generates a system reset on expiry of a programmed
time period, unless the program refreshes the counter (T[6;0] downcounter)
before reaching 0x3F value (i.e. a reset is generated when the counter
value rolls down from 0x40 to 0x3F).
(+) An MCU reset is also generated if the counter value is refreshed
before the counter has reached the refresh window value. This
implies that the counter must be refreshed in a limited window.
(+) Once enabled the WWDG cannot be disabled except by a system reset.
(+) WWDGRST flag in RCC CSR register can be used to inform when a WWDG
reset occurs.
(+) The WWDG counter input clock is derived from the APB clock divided
by a programmable prescaler.
(+) WWDG clock (Hz) = PCLK1 / (4096 * Prescaler)
(+) WWDG timeout (mS) = 1000 * (T[5;0] + 1) / WWDG clock (Hz)
where T[5;0] are the lowest 6 bits of Counter.
(+) WWDG Counter refresh is allowed between the following limits :
(++) min time (mS) = 1000 * (Counter - Window) / WWDG clock
(++) max time (mS) = 1000 * (Counter - 0x40) / WWDG clock
(+) Typical values:
(++) Counter min (T[5;0] = 0x00) @56 MHz(PCLK1) with zero prescaler:
max timeout before reset: ~73.14 µs
(++) Counter max (T[5;0] = 0x3F) @56 MHz(PCLK1) with prescaler dividing by 128:
max timeout before reset: ~599.18 ms
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
*** Common driver usage ***
===========================
(+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE().
(+) Set the WWDG prescaler, refresh window and counter value
using HAL_WWDG_Init() function.
(+) Start the WWDG using HAL_WWDG_Start() function.
When the WWDG is enabled the counter value should be configured to
a value greater than 0x40 to prevent generating an immediate reset.
(+) Optionally you can enable the Early Wakeup Interrupt (EWI) which is
generated when the counter reaches 0x40, and then start the WWDG using
HAL_WWDG_Start_IT(). At EWI HAL_WWDG_WakeupCallback is executed and user can
add his own code by customization of callback HAL_WWDG_WakeupCallback.
Once enabled, EWI interrupt cannot be disabled except by a system reset.
(+) Then the application program must refresh the WWDG counter at regular
intervals during normal operation to prevent an MCU reset, using
HAL_WWDG_Refresh() function. This operation must occur only when
the counter is lower than the refresh window value already programmed.
[..]
*** Callback registration ***
=============================
The compilation define USE_HAL_WWDG_REGISTER_CALLBACKS when set to 1 allows
the user to configure dynamically the driver callbacks. Use Functions
@ref HAL_WWDG_RegisterCallback() to register a user callback.
(+) Function @ref HAL_WWDG_RegisterCallback() allows to register following
callbacks:
(++) EwiCallback : callback for Early WakeUp Interrupt.
(++) MspInitCallback : WWDG MspInit.
This function takes as parameters the HAL peripheral handle, the Callback ID
and a pointer to the user callback function.
(+) Use function @ref HAL_WWDG_UnRegisterCallback() to reset a callback to
the default weak (surcharged) function. @ref HAL_WWDG_UnRegisterCallback()
takes as parameters the HAL peripheral handle and the Callback ID.
This function allows to reset following callbacks:
(++) EwiCallback : callback for Early WakeUp Interrupt.
(++) MspInitCallback : WWDG MspInit.
When calling @ref HAL_WWDG_Init function, callbacks are reset to the
corresponding legacy weak (surcharged) functions:
@ref HAL_WWDG_EarlyWakeupCallback() and HAL_WWDG_MspInit() only if they have
not been registered before.
When compilation define USE_HAL_WWDG_REGISTER_CALLBACKS is set to 0 or
not defined, the callback registering feature is not available
and weak (surcharged) callbacks are used.
*** WWDG HAL driver macros list ***
===================================
[..]
Below the list of most used macros in WWDG HAL driver.
(+) __HAL_WWDG_ENABLE: Enable the WWDG peripheral
(+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status
(+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags
(+) __HAL_WWDG_ENABLE_IT: Enable the WWDG early wakeup interrupt
@endverbatim
******************************************************************************
* @attention
*
*
© Copyright (c) 2018 STMicroelectronics.
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal.h"
/** @addtogroup STM32G0xx_HAL_Driver
* @{
*/
#ifdef HAL_WWDG_MODULE_ENABLED
/** @defgroup WWDG WWDG
* @brief WWDG HAL module driver.
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup WWDG_Exported_Functions WWDG Exported Functions
* @{
*/
/** @defgroup WWDG_Exported_Functions_Group1 Initialization and Configuration functions
* @brief Initialization and Configuration functions.
*
@verbatim
==============================================================================
##### Initialization and Configuration functions #####
==============================================================================
[..]
This section provides functions allowing to:
(+) Initialize and start the WWDG according to the specified parameters
in the WWDG_InitTypeDef of associated handle.
(+) Initialize the WWDG MSP.
@endverbatim
* @{
*/
/**
* @brief Initialize the WWDG according to the specified.
* parameters in the WWDG_InitTypeDef of associated handle.
* @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains
* the configuration information for the specified WWDG module.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg)
{
/* Check the WWDG handle allocation */
if (hwwdg == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler));
assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window));
assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter));
assert_param(IS_WWDG_EWI_MODE(hwwdg->Init.EWIMode));
#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1)
/* Reset Callback pointers */
if(hwwdg->EwiCallback == NULL)
{
hwwdg->EwiCallback = HAL_WWDG_EarlyWakeupCallback;
}
if(hwwdg->MspInitCallback == NULL)
{
hwwdg->MspInitCallback = HAL_WWDG_MspInit;
}
/* Init the low level hardware */
hwwdg->MspInitCallback(hwwdg);
#else
/* Init the low level hardware */
HAL_WWDG_MspInit(hwwdg);
#endif
/* Set WWDG Counter */
WRITE_REG(hwwdg->Instance->CR, (WWDG_CR_WDGA | hwwdg->Init.Counter));
/* Set WWDG Prescaler and Window */
WRITE_REG(hwwdg->Instance->CFR, (hwwdg->Init.EWIMode | hwwdg->Init.Prescaler | hwwdg->Init.Window));
/* Return function status */
return HAL_OK;
}
/**
* @brief Initialize the WWDG MSP.
* @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains
* the configuration information for the specified WWDG module.
* @note When rewriting this function in user file, mechanism may be added
* to avoid multiple initialize when HAL_WWDG_Init function is called
* again to change parameters.
* @retval None
*/
__weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hwwdg);
/* NOTE: This function should not be modified, when the callback is needed,
the HAL_WWDG_MspInit could be implemented in the user file
*/
}
#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1)
/**
* @brief Register a User WWDG Callback
* To be used instead of the weak (surcharged) predefined callback
* @param hwwdg WWDG handle
* @param CallbackID ID of the callback to be registered
* This parameter can be one of the following values:
* @arg @ref HAL_WWDG_EWI_CB_ID Early WakeUp Interrupt Callback ID
* @arg @ref HAL_WWDG_MSPINIT_CB_ID MspInit callback ID
* @param pCallback pointer to the Callback function
* @retval status
*/
HAL_StatusTypeDef HAL_WWDG_RegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID, pWWDG_CallbackTypeDef pCallback)
{
HAL_StatusTypeDef status = HAL_OK;
if(pCallback == NULL)
{
status = HAL_ERROR;
}
else
{
switch(CallbackID)
{
case HAL_WWDG_EWI_CB_ID:
hwwdg->EwiCallback = pCallback;
break;
case HAL_WWDG_MSPINIT_CB_ID:
hwwdg->MspInitCallback = pCallback;
break;
default:
status = HAL_ERROR;
break;
}
}
return status;
}
/**
* @brief Unregister a WWDG Callback
* WWDG Callback is redirected to the weak (surcharged) predefined callback
* @param hwwdg WWDG handle
* @param CallbackID ID of the callback to be registered
* This parameter can be one of the following values:
* @arg @ref HAL_WWDG_EWI_CB_ID Early WakeUp Interrupt Callback ID
* @arg @ref HAL_WWDG_MSPINIT_CB_ID MspInit callback ID
* @retval status
*/
HAL_StatusTypeDef HAL_WWDG_UnRegisterCallback(WWDG_HandleTypeDef *hwwdg, HAL_WWDG_CallbackIDTypeDef CallbackID)
{
HAL_StatusTypeDef status = HAL_OK;
switch(CallbackID)
{
case HAL_WWDG_EWI_CB_ID:
hwwdg->EwiCallback = HAL_WWDG_EarlyWakeupCallback;
break;
case HAL_WWDG_MSPINIT_CB_ID:
hwwdg->MspInitCallback = HAL_WWDG_MspInit;
break;
default:
status = HAL_ERROR;
break;
}
return status;
}
#endif
/**
* @}
*/
/** @defgroup WWDG_Exported_Functions_Group2 IO operation functions
* @brief IO operation functions
*
@verbatim
==============================================================================
##### IO operation functions #####
==============================================================================
[..]
This section provides functions allowing to:
(+) Refresh the WWDG.
(+) Handle WWDG interrupt request and associated function callback.
@endverbatim
* @{
*/
/**
* @brief Refresh the WWDG.
* @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains
* the configuration information for the specified WWDG module.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg)
{
/* Write to WWDG CR the WWDG Counter value to refresh with */
WRITE_REG(hwwdg->Instance->CR, (hwwdg->Init.Counter));
/* Return function status */
return HAL_OK;
}
/**
* @brief Handle WWDG interrupt request.
* @note The Early Wakeup Interrupt (EWI) can be used if specific safety operations
* or data logging must be performed before the actual reset is generated.
* The EWI interrupt is enabled by calling HAL_WWDG_Init function with
* EWIMode set to WWDG_EWI_ENABLE.
* When the downcounter reaches the value 0x40, and EWI interrupt is
* generated and the corresponding Interrupt Service Routine (ISR) can
* be used to trigger specific actions (such as communications or data
* logging), before resetting the device.
* @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains
* the configuration information for the specified WWDG module.
* @retval None
*/
void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg)
{
/* Check if Early Wakeup Interrupt is enable */
if (__HAL_WWDG_GET_IT_SOURCE(hwwdg, WWDG_IT_EWI) != RESET)
{
/* Check if WWDG Early Wakeup Interrupt occurred */
if (__HAL_WWDG_GET_FLAG(hwwdg, WWDG_FLAG_EWIF) != RESET)
{
/* Clear the WWDG Early Wakeup flag */
__HAL_WWDG_CLEAR_FLAG(hwwdg, WWDG_FLAG_EWIF);
#if (USE_HAL_WWDG_REGISTER_CALLBACKS == 1)
/* Early Wakeup registered callback */
hwwdg->EwiCallback(hwwdg);
#else
/* Early Wakeup callback */
HAL_WWDG_EarlyWakeupCallback(hwwdg);
#endif
}
}
}
/**
* @brief WWDG Early Wakeup callback.
* @param hwwdg pointer to a WWDG_HandleTypeDef structure that contains
* the configuration information for the specified WWDG module.
* @retval None
*/
__weak void HAL_WWDG_EarlyWakeupCallback(WWDG_HandleTypeDef *hwwdg)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hwwdg);
/* NOTE: This function should not be modified, when the callback is needed,
the HAL_WWDG_EarlyWakeupCallback could be implemented in the user file
*/
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_WWDG_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/