---
sidebar_label: UDF
title: User Defined Functions(UDF)
description: "Scalar functions and aggregate functions developed by users can be utilized by the query framework to expand query capability"
---

In some use cases, built-in functions are not adequate for the query capability required by application programs. With UDF, the functions developed by users can be utilized by the query framework to meet business and application requirements. UDF normally takes one column of data as input, but can also support the result of a sub-query as input.

From version 2.2.0.0, UDF written in C/C++ are supported by TDengine.


## Types of UDF

Two kinds of functions can be implemented by UDF: scalar functions and aggregate functions.

Scalar functions return multiple rows and aggregate functions return either 0 or 1 row.

In the case of a scalar function you only have to implement the "normal" function template.

In the case of an aggregate function, in addition to the "normal" function, you also need to implement the "merge" and "finalize" function templates even if the implementation is empty. This will become clear in the sections below.

### Scalar Function

As mentioned earlier, a scalar UDF only has to implement the "normal" function template. The function template below can be used to define your own scalar function.

`void udfNormalFunc(char* data, short itype, short ibytes, int numOfRows, long long* ts, char* dataOutput, char* interBuf, char* tsOutput, int* numOfOutput, short otype, short obytes, SUdfInit* buf)`

`udfNormalFunc` is the place holder for a function name. A function implemented based on the above template can be used to perform scalar computation on data rows. The parameters are fixed to control the data exchange between UDF and TDengine.

- Definitions of the parameters:

  - data：input data
  - itype：the type of input data, for details please refer to [type definition in column_meta](/reference/rest-api/), for example 4 represents INT
  - iBytes：the number of bytes consumed by each value in the input data
  - oType：the type of output data, similar to iType
  - oBytes：the number of bytes consumed by each value in the output data
  - numOfRows：the number of rows in the input data
  - ts: the column of timestamp corresponding to the input data
  - dataOutput：the buffer for output data, total size is `oBytes * numberOfRows`
  - interBuf：the buffer for an intermediate result. Its size is specified by the `BUFSIZE` parameter when creating a UDF. It's normally used when the intermediate result is not same as the final result. This buffer is allocated and freed by TDengine.
  - tsOutput：the column of timestamps corresponding to the output data; it can be used to output timestamp together with the output data if it's not NULL
  - numOfOutput：the number of rows in output data
  - buf：for the state exchange between UDF and TDengine

  [add_one.c](https://github.com/taosdata/TDengine/blob/develop/tests/script/sh/add_one.c) is one example of a very simple UDF implementation, i.e. one instance of the above `udfNormalFunc` template. It adds one to each value of a passed in column, which can be filtered using the `where` clause, and outputs the result.

### Aggregate Function

For aggregate UDF, as mentioned earlier you must implement a "normal" function template (described above) and also implement the "merge" and "finalize" templates.

#### Merge Function Template

The function template below can be used to define your own merge function for an aggregate UDF.

`void udfMergeFunc(char* data, int32_t numOfRows, char* dataOutput, int32_t* numOfOutput, SUdfInit* buf)`

`udfMergeFunc` is the place holder for a function name. The function implemented with the above template is used to aggregate intermediate results and can only be used in the aggregate query for STable.

Definitions of the parameters:

- data：array of output data, if interBuf is used it's an array of interBuf
- numOfRows：number of rows in `data`
- dataOutput：the buffer for output data, the size is same as that of the final result; If the result is not final, it can be put in the interBuf, i.e. `data`.
- numOfOutput：number of rows in the output data
- buf：for the state exchange between UDF and TDengine

#### Finalize Function Template

The function template below can be used to finalize the result of your own UDF, normally used when interBuf is used.

`void udfFinalizeFunc(char* dataOutput, char* interBuf, int* numOfOutput, SUdfInit* buf)`

`udfFinalizeFunc` is the place holder of function name, definitions of the parameter are as below:

- dataOutput：buffer for output data
- interBuf：buffer for intermediate result, can be used as input for next processing step
- numOfOutput：number of output data, can only be 0 or 1 for aggregate function
- buf：for state exchange between UDF and TDengine

### Example abs_max.c

[abs_max.c](https://github.com/taosdata/TDengine/blob/develop/tests/script/sh/abs_max.c) is an example of a user defined aggregate function to get the maximum from the absolute values of a column.

The internal processing happens as follows. The results of the select statement are divided into multiple row blocks and `udfNormalFunc`, i.e. `abs_max` in this case, is performed on each row block to generate the intermediate results for each sub table. Then `udfMergeFunc`, i.e. `abs_max_merge` in this case, is performed on the intermediate result of sub tables to aggregate and generate the final or intermediate result of STable. The intermediate result of STable is finally processed by `udfFinalizeFunc`, i.e. `abs_max_finalize` in this example, to generate the final result, which contains either 0 or 1 row.

Other typical aggregation functions such as covariance, can also be implemented using aggregate UDF.

## UDF Naming Conventions

The naming convention for the 3 kinds of function templates required by UDF is as follows:
 - udfNormalFunc, udfMergeFunc, and udfFinalizeFunc are required to have same prefix, i.e. the actual name of udfNormalFunc. The udfNormalFunc doesn't need a suffix following the function name. 
 - udfMergeFunc should be udfNormalFunc followed by `_merge`
 - udfFinalizeFunc should be udfNormalFunc followed by `_finalize`. 
 
The naming convention is part of TDengine's UDF framework. TDengine follows this convention to invoke the corresponding actual functions.

Depending on whether you are creating a scalar UDF or aggregate UDF, the functions that you need to implement are different.

- Scalar function：udfNormalFunc is required.
- Aggregate function：udfNormalFunc, udfMergeFunc (if query on STable) and udfFinalizeFunc are required.

For clarity, assuming we want to implement a UDF named "foo":
- If the function is a scalar function, we only need to implement the "normal" function template and it should be named simply `foo`. 
- If the function is an aggregate function, we need to implement `foo`, `foo_merge`, and `foo_finalize`. Note that for aggregate UDF, even though one of the three functions is not necessary, there must be an empty implementation.

## Compile UDF

The source code of UDF in C can't be utilized by TDengine directly. UDF can only be loaded into TDengine after compiling to dynamically linked library (DLL).

For example, the example UDF `add_one.c` mentioned earlier, can be compiled into DLL using the command below, in a Linux Shell.

```bash
gcc -g -O0 -fPIC -shared add_one.c -o add_one.so
```

The generated DLL file `add_one.so` can be used later when creating a UDF. It's recommended to use GCC not older than 7.5.

## Create and Use UDF

When a UDF is created in a TDengine instance, it is available across the databases in that instance.

### Create UDF

SQL command can be executed on the host where the generated UDF DLL resides to load the UDF DLL into TDengine. This operation cannot be done through REST interface or web console. Once created, any client of the current TDengine can use these UDF functions in their SQL commands. UDF are stored in the management node of TDengine. The UDFs loaded in TDengine would be still available after TDengine is restarted.

When creating UDF, the type of UDF, i.e. a scalar function or aggregate function must be specified. If the specified type is wrong, the SQL statements using the function would fail with errors. The input type and output type don't need to be the same in UDF, but the input data type and output data type must be consistent with the UDF definition.

- Create Scalar Function

```sql
CREATE FUNCTION userDefinedFunctionName AS "/absolute/path/to/userDefinedFunctionName.so" OUTPUTTYPE <supported TDengine type> [BUFSIZE B];
```

- userDefinedFunctionName：The function name to be used in SQL statement which must be consistent with the function name defined by `udfNormalFunc` and is also the name of the compiled DLL (.so file).
- path：The absolute path of the DLL file including the name of the shared object file (.so). The path must be quoted with single or double quotes.
- outputtype：The output data type, the value is the literal string of the supported TDengine data type.
- B：the size of intermediate buffer, in bytes; it is an optional parameter and the range is [0,512].

For example, below SQL statement can be used to create a UDF from `add_one.so`.

```sql
CREATE FUNCTION add_one AS "/home/taos/udf_example/add_one.so" OUTPUTTYPE INT;
```

- Create Aggregate Function

```sql
CREATE AGGREGATE FUNCTION userDefinedFunctionName AS "/absolute/path/to/userDefinedFunctionName.so" OUTPUTTYPE <supported TDengine data type> [ BUFSIZE B ];
```

- userDefinedFunctionName：the function name to be used in SQL statement which must be consistent with the function name defined by `udfNormalFunc` and is also the name of the compiled DLL (.so file).
- path：the absolute path of the DLL file including the name of the shared object file (.so). The path needs to be quoted by single or double quotes.
- OUTPUTTYPE：the output data type, the value is the literal string of the type
- B：the size of intermediate buffer, in bytes; it's an optional parameter and the range is [0,512]

For details about how to use intermediate result, please refer to example program [demo.c](https://github.com/taosdata/TDengine/blob/develop/tests/script/sh/demo.c).

For example, below SQL statement can be used to create a UDF from `demo.so`.

```sql
CREATE AGGREGATE FUNCTION demo AS "/home/taos/udf_example/demo.so" OUTPUTTYPE DOUBLE bufsize 14;
```

### Manage UDF

- Delete UDF

```
DROP FUNCTION ids(X);
```

- ids(X)：same as that in `CREATE FUNCTION` statement

```sql
DROP FUNCTION add_one;
```

- Show Available UDF

```sql
SHOW FUNCTIONS;
```

### Use UDF

The function name specified when creating UDF can be used directly in SQL statements, just like builtin functions.

```sql
SELECT X(c) FROM table/STable;
```

The above SQL statement invokes function X for column c.

## Restrictions for UDF

In current version there are some restrictions for UDF

1. Only Linux is supported when creating and invoking UDF for both client side and server side
2. UDF can't be mixed with builtin functions
3. Only one UDF can be used in a SQL statement
4. Only a single column is supported as input for UDF
5. Once created successfully, UDF is persisted in MNode of TDengineUDF
6. UDF can't be created through REST interface
7. The function name used when creating UDF in SQL must be consistent with the function name defined in the DLL, i.e. the name defined by `udfNormalFunc`
8. The name of a UDF should not conflict with any of TDengine's built-in functions

## Examples

### Scalar function example [add_one](https://github.com/taosdata/TDengine/blob/develop/tests/script/sh/add_one.c)

<details>
<summary>add_one.c</summary>

```c
{{#include tests/script/sh/add_one.c}}
```

</details>

### Aggregate function example [abs_max](https://github.com/taosdata/TDengine/blob/develop/tests/script/sh/abs_max.c)

<details>
<summary>abs_max.c</summary>

```c
{{#include tests/script/sh/abs_max.c}}
```

</details>

### Example for using intermediate result [demo](https://github.com/taosdata/TDengine/blob/develop/tests/script/sh/demo.c)

<details>
<summary>demo.c</summary>

```c
{{#include tests/script/sh/demo.c}}
```

</details>