diff --git a/documentation20/en/00.index/docs.md b/documentation20/en/00.index/docs.md index 0ac4a06ef49ab99f78d39c81cb301ff925445acf..05c16aa3eb21179e0c7bc65d7bdb35222ba456ea 100644 --- a/documentation20/en/00.index/docs.md +++ b/documentation20/en/00.index/docs.md @@ -1,37 +1,50 @@ # TDengine Documentation -TDengine is a highly efficient platform to store, query, and analyze time-series data. It is specially designed and optimized for IoT, Internet of Vehicles, Industrial IoT, IT Infrastructure and Application Monitoring, etc. It works like a relational database, such as MySQL, but you are strongly encouraged to read through the following documentation before you experience it, especially the Data Model and Data Modeling sections. In addition to this document, you should also download and read our technology white paper. For the older TDengine version 1.6 documentation, please click here. +TDengine is a highly efficient platform to store, query, and analyze time-series data. It is specially designed and optimized for IoT, Internet of Vehicles, Industrial IoT, IT Infrastructure and Application Monitoring, etc. It works like a relational database, such as MySQL, but you are strongly encouraged to read through the following documentation before you experience it, especially the Data Modeling sections. In addition to this document, you should also download and read the technology white paper. For the older TDengine version 1.6 documentation, please click [here](https://www.taosdata.com/en/documentation16/). ## [TDengine Introduction](/evaluation) * [TDengine Introduction and Features](/evaluation#intro) * [TDengine Use Scenes](/evaluation#scenes) -* [TDengine Performance Metrics and Verification](/evaluation#) +* [TDengine Performance Metrics and Verification]((/evaluation#)) ## [Getting Started](/getting-started) -* [Quickly Install](/getting-started#install): install via source code/package / Docker within seconds - -- [Easy to Launch](/getting-started#start): start / stop TDengine with systemctl -- [Command-line](/getting-started#console) : an easy way to access TDengine server -- [Experience Lightning Speed](/getting-started#demo): running a demo, inserting/querying data to experience faster speed -- [List of Supported Platforms](/getting-started#platforms): a list of platforms supported by TDengine server and client -- [Deploy to Kubernetes](https://taosdata.github.io/TDengine-Operator/en/index.html)：a detailed guide for TDengine deployment in Kubernetes environment +* [Quick Install](/getting-started#install): install via source code/package / Docker within seconds +* [Quick Launch](/getting-started#start): start / stop TDengine quickly with systemctl +* [Command-line](/getting-started#console) : an easy way to access TDengine server +* [Experience Lightning Speed](/getting-started#demo): running a demo, inserting/querying data to experience faster speed +* [List of Supported Platforms](/getting-started#platforms): a list of platforms supported by TDengine server and client +* [Deploy to Kubernetes](https://taosdata.github.io/TDengine-Operator/en/index.html)：a detailed guide for TDengine deployment in Kubernetes environment ## [Overall Architecture](/architecture) -- [Data Model](/architecture#model): relational database model, but one table for one device with static tags -- [Cluster and Primary Logical Unit](/architecture#cluster): Take advantage of NoSQL, support scale-out and high-reliability -- [Storage Model and Data Partitioning/Sharding](/architecture#sharding): tag data will be separated from time-series data, segmented by vnode and time -- [Data Writing and Replication Process](/architecture#replication): records received are written to WAL, cached, with acknowledgement is sent back to client, while supporting multi-replicas +- [Data Model](/architecture#model): relational database model, but one table for one data collection point with static tags +- [Cluster and Primary Logical Unit](/architecture#cluster): Take advantage of NoSQ architecture, highly available and horizontal scalable +- [Storage Model and Data Partitioning/Sharding](/architecture#sharding): tag data is separated from time-series data, sharded by vnodes and partitioned by time +- [Data Writing and Replication Process](/architecture#replication): records received are written to WAL, cached, with acknowledgement sent back to client, while supporting data replications. - [Caching and Persistence](/architecture#persistence): latest records are cached in memory, but are written in columnar format with an ultra-high compression ratio -- [Data Query](/architecture#query): support various functions, time-axis aggregation, interpolation, and multi-table aggregation +- [Data Query](/architecture#query): support various SQL functions, downsampling, interpolation, and multi-table aggregation ## [Data Modeling](/model) -- [Create a Database](/model#create-db): create a database for all data collection points with similar features +- [Create a Database](/model#create-db): create a database for all data collection points with similar data characteristics - [Create a Super Table(STable)](/model#create-stable): create a STable for all data collection points with the same type -- [Create a Table](/model#create-table): use STable as the template, to create a table for each data collecting point +- [Create a Table](/model#create-table): use STable as the template to create a table for each data collecting point + +## [Efficient Data Ingestion](/insert) + +- [Data Writing via SQL](/insert#sql): write one or multiple records into one or multiple tables via SQL insert command +- [Data Writing via Prometheus](/insert#prometheus): Configure Prometheus to write data directly without any code +- [Data Writing via Telegraf](/insert#telegraf): Configure Telegraf to write collected data directly without any code +- [Data Writing via EMQ X](/insert#emq): Configure EMQ X to write MQTT data directly without any code +- [Data Writing via HiveMQ Broker](/insert#hivemq): Configure HiveMQ to write MQTT data directly without any code + +## [Efficient Data Querying](/queries) + +- [Major Features](/queries#queries): support various standard query functions, setting filter conditions, and querying per time segment +- [Multi-table Aggregation](/queries#aggregation): use STable and set tag filter conditions to perform efficient aggregation +- [Downsampling](/queries#sampling): aggregate data in successive time windows, support interpolation ## [TAOS SQL](/taos-sql) @@ -40,27 +53,13 @@ TDengine is a highly efficient platform to store, query, and analyze time-series - [Table Management](/taos-sql#table): add, drop, check, alter tables - [STable Management](/taos-sql#super-table): add, drop, check, alter STables - [Tag Management](/taos-sql#tags): add, drop, alter tags -- [Inserting Records](/taos-sql#insert): support to write single/multiple items per table, multiple items across tables, and support to write historical data +- [Inserting Records](/taos-sql#insert): write single/multiple records a table, multiple records across tables, and historical data - [Data Query](/taos-sql#select): support time segment, value filtering, sorting, manual paging of query results, etc - [SQL Function](/taos-sql#functions): support various aggregation functions, selection functions, and calculation functions, such as avg, min, diff, etc -- [Time Dimensions Aggregation](/taos-sql#aggregation): aggregate and reduce the dimension after cutting table data by time segment +- [Cutting and Aggregation](/taos-sql#aggregation): aggregate and reduce the dimension after cutting table data by time segment - [Boundary Restrictions](/taos-sql#limitation): restrictions for the library, table, SQL, and others - [Error Code](/taos-sql/error-code): TDengine 2.0 error codes and corresponding decimal codes -## [Efficient Data Ingestion](/insert) - -- [SQL Ingestion](/insert#sql): write one or multiple records into one or multiple tables via SQL insert command -- [Prometheus Ingestion](/insert#prometheus): Configure Prometheus to write data directly without any code -- [Telegraf Ingestion](/insert#telegraf): Configure Telegraf to write collected data directly without any code -- [EMQ X Broker](/insert#emq): Configure EMQ X to write MQTT data directly without any code -- [HiveMQ Broker](/insert#hivemq): Configure HiveMQ to write MQTT data directly without any code - -## [Efficient Data Querying](/queries) - -- [Main Query Features](/queries#queries): support various standard functions, setting filter conditions, and querying per time segment -- [Multi-table Aggregation Query](/queries#aggregation): use STable and set tag filter conditions to perform efficient aggregation queries -- [Downsampling to Query Value](/queries#sampling): aggregate data in successive time windows, support interpolation - ## [Advanced Features](/advanced-features) - [Continuous Query](/advanced-features#continuous-query): Based on sliding windows, the data stream is automatically queried and calculated at regular intervals @@ -71,7 +70,7 @@ TDengine is a highly efficient platform to store, query, and analyze time-series ## [Connector](/connector) - [C/C++ Connector](/connector#c-cpp): primary method to connect to TDengine server through libtaos client library -- [Java Connector(JDBC)](/connector/java): driver for connecting to the server from Java applications using the JDBC API +- [Java Connector(JDBC)](https://www.taosdata.com/en/documentation20/connector/java): driver for connecting to the server from Java applications using the JDBC API - [Python Connector](/connector#python): driver for connecting to TDengine server from Python applications - [RESTful Connector](/connector#restful): a simple way to interact with TDengine via HTTP - [Go Connector](/connector#go): driver for connecting to TDengine server from Go applications @@ -88,12 +87,12 @@ TDengine is a highly efficient platform to store, query, and analyze time-series ## [Installation and Management of TDengine Cluster](/cluster) -- [Preparation](/cluster#prepare): important considerations before deploying TDengine for production usage -- [Create Your First Node](/cluster#node-one): simple to follow the quick setup +- [Preparation](/cluster#prepare): important steps before deploying TDengine for production usage +- [Create the First Node](/cluster#node-one): just follow the steps in quick start - [Create Subsequent Nodes](/cluster#node-other): configure taos.cfg for new nodes to add more to the existing cluster - [Node Management](/cluster#management): add, delete, and check nodes in the cluster -- [High-availability of Vnode](/cluster#high-availability): implement high-availability of Vnode through multi-replicas -- [Mnode Management](/cluster#mnode): automatic system creation without any manual intervention +- [High-availability of Vnode](/cluster#high-availability): implement high-availability of Vnode through replicas +- [Mnode Management](/cluster#mnode): mnodes are created automatically without any manual intervention - [Load Balancing](/cluster#load-balancing): automatically performed once the number of nodes or load changes - [Offline Node Processing](/cluster#offline): any node that offline for more than a certain period will be removed from the cluster - [Arbitrator](/cluster#arbitrator): used in the case of an even number of replicas to prevent split-brain @@ -108,27 +107,14 @@ TDengine is a highly efficient platform to store, query, and analyze time-series - [Export Data](/administrator#export): export data either from TDengine shell or from the taosdump tool - [System Monitor](/administrator#status): monitor the system connections, queries, streaming calculation, logs, and events - [File Directory Structure](/administrator#directories): directories where TDengine data files and configuration files located -- [Parameter Restrictions and Reserved Keywords](/administrator#keywords): TDengine’s list of parameter restrictions and reserved keywords - -## TDengine Technical Design - -- [System Module]: taosd functions and modules partitioning -- [Data Replication]: support real-time synchronous/asynchronous replication, to ensure high-availability of the system -- [Technical Blog](https://www.taosdata.com/cn/blog/?categories=3): More technical analysis and architecture design articles - -## Common Tools - -- [TDengine sample import tools](https://www.taosdata.com/blog/2020/01/18/1166.html) -- [TDengine performance comparison test tools](https://www.taosdata.com/blog/2020/01/18/1166.html) -- [Use TDengine visually through IDEA Database Management Tool](https://www.taosdata.com/blog/2020/08/27/1767.html) +- [Parameter Limitss and Reserved Keywords](/administrator#keywords): TDengine’s list of parameter limits and reserved keywords ## Performance: TDengine vs Others -- [Performance: TDengine vs InfluxDB with InfluxDB’s open-source performance testing tool](https://www.taosdata.com/blog/2020/01/13/1105.html) -- [Performance: TDengine vs OpenTSDB](https://www.taosdata.com/blog/2019/08/21/621.html) -- [Performance: TDengine vs Cassandra](https://www.taosdata.com/blog/2019/08/14/573.html) -- [Performance: TDengine vs InfluxDB](https://www.taosdata.com/blog/2019/07/19/419.html) -- [Performance Test Reports of TDengine vs InfluxDB/OpenTSDB/Cassandra/MySQL/ClickHouse](https://www.taosdata.com/downloads/TDengine_Testing_Report_cn.pdf) +- [Performance: TDengine vs OpenTSDB](https://www.taosdata.com/blog/2019/09/12/710.html) +- [Performance: TDengine vs Cassandra](https://www.taosdata.com/blog/2019/09/12/708.html) +- [Performance: TDengine vs InfluxDB](https://www.taosdata.com/blog/2019/09/12/706.html) +- [Performance Test Reports of TDengine vs InfluxDB/OpenTSDB/Cassandra/MySQL/ClickHouse](https://www.taosdata.com/downloads/TDengine_Testing_Report_en.pdf) ## More on IoT Big Data @@ -136,7 +122,8 @@ TDengine is a highly efficient platform to store, query, and analyze time-series - [Features and Functions of IoT Big Data platforms](https://www.taosdata.com/blog/2019/07/29/542.html) - [Why don’t General Big Data Platforms Fit IoT Scenarios?](https://www.taosdata.com/blog/2019/07/09/why-does-the-general-big-data-platform-not-fit-iot-data-processing/) - [Why TDengine is the best choice for IoT, Internet of Vehicles, and Industry Internet Big Data platforms?](https://www.taosdata.com/blog/2019/07/09/why-tdengine-is-the-best-choice-for-iot-big-data-processing/) +- [Technical Blog](https://www.taosdata.com/cn/blog/?categories=3): More technical analysis and architecture design articles ## FAQ -- [FAQ: Common questions and answers](/faq) +- [FAQ: Common questions and answers](/faq) \ No newline at end of file diff --git a/documentation20/en/01.evaluation/docs.md b/documentation20/en/01.evaluation/docs.md index 250f465d7b1280a78e18250f95aefaeca0c95415..58e30b2e1c7caed8972b739574f70fab19656bd0 100644 --- a/documentation20/en/01.evaluation/docs.md +++ b/documentation20/en/01.evaluation/docs.md @@ -2,18 +2,18 @@ ## About TDengine -TDengine is an innovative Big Data processing product launched by Taos Data in the face of the fast-growing Internet of Things (IoT) Big Data market and technical challenges. It does not rely on any third-party software, nor does it optimize or package any open-source database or stream computing product. Instead, it is a product independently developed after absorbing the advantages of many traditional relational databases, NoSQL databases, stream computing engines, message queues, and other software. TDengine has its own unique Big Data processing advantages in time-series space. +TDengine is an innovative Big Data processing product launched by TAOS Data in the face of the fast-growing Internet of Things (IoT) Big Data market and technical challenges. It does not rely on any third-party software, nor does it optimize or package any open-source database or stream computing product. Instead, it is a product independently developed after absorbing the advantages of many traditional relational databases, NoSQL databases, stream computing engines, message queues, and other software. TDengine has its own unique Big Data processing advantages in time-series space. One of the modules of TDengine is the time-series database. However, in addition to this, to reduce the complexity of research and development and the difficulty of system operation, TDengine also provides functions such as caching, message queuing, subscription, stream computing, etc. TDengine provides a full-stack technical solution for the processing of IoT and Industrial Internet BigData. It is an efficient and easy-to-use IoT Big Data platform. Compared with typical Big Data platforms such as Hadoop, TDengine has the following distinct characteristics: - **Performance improvement over 10 times**: An innovative data storage structure is defined, with each single core can process at least 20,000 requests per second, insert millions of data points, and read more than 10 million data points, which is more than 10 times faster than other existing general database. - **Reduce the cost of hardware or cloud services to 1/5**: Due to its ultra-performance, TDengine’s computing resources consumption is less than 1/5 of other common Big Data solutions; through columnar storage and advanced compression algorithms, the storage consumption is less than 1/10 of other general databases. - **Full-stack time-series data processing engine**: Integrate database, message queue, cache, stream computing, and other functions, and the applications do not need to integrate with software such as Kafka/Redis/HBase/Spark/HDFS, thus greatly reducing the complexity cost of application development and maintenance. -- **Powerful analysis functions**: Data from ten years ago or one second ago, can all be queried based on a specified time range. Data can be aggregated on a timeline or multiple devices. Ad-hoc queries can be made at any time through Shell, Python, R, and MATLAB. -- **Seamless connection with third-party tools**: Integration with Telegraf, Grafana, EMQ, HiveMQ, Prometheus, MATLAB, R, etc. without even one single line of code. OPC, Hadoop, Spark, etc. will be supported in the future, and more BI tools will be seamlessly connected to. +- **Highly Available and Horizontal Scalabe **: With the distributed architecture and consistency algorithm, via multi-replication and clustering features, TDengine ensures high availability and horizontal scalability to support the mission-critical applications. - **Zero operation cost & zero learning cost**: Installing clusters is simple and quick, with real-time backup built-in, and no need to split libraries or tables. Similar to standard SQL, TDengine can support RESTful, Python/Java/C/C++/C#/Go/Node.js, and similar to MySQL with zero learning cost. +- **Core is Open Sourced:** Except some auxiliary features, the core of TDengine is open sourced. Enterprise won't be locked by the database anymore. Ecosystem is more strong, product is more stable, and developer communities are more active. -With TDengine, the total cost of ownership of typical IoT, Internet of Vehicles, and Industrial Internet Big Data platforms can be greatly reduced. However, it should be pointed out that due to making full use of the characteristics of IoT time-series data, TDengine cannot be used to process general data from web crawlers, microblogs, WeChat, e-commerce, ERP, CRM, and other sources. +With TDengine, the total cost of ownership of typical IoT, Internet of Vehicles, and Industrial Internet Big Data platforms can be greatly reduced. However, since it makes full use of the characteristics of IoT time-series data, TDengine cannot be used to process general data from web crawlers, microblogs, WeChat, e-commerce, ERP, CRM, and other sources. ![TDengine Technology Ecosystem](page://images/eco_system.png) @@ -62,4 +62,4 @@ From the perspective of data sources, designers can analyze the applicability of | ------------------------------------------------- | ------------------ | ----------------------- | ------------------- | ------------------------------------------------------------ | | Require system with high-reliability | | | √ | TDengine has a very robust and reliable system architecture to implement simple and convenient daily operation with streamlined experiences for operators, thus human errors and accidents are eliminated to the greatest extent. | | Require controllable operation learning cost | | | √ | As above. | -| Require abundant talent supply | √ | | | As a new-generation product, it’s still difficult to find talents with TDengine experiences from market. However, the learning cost is low. As the vendor, we also provide extensive operation training and counselling services. | +| Require abundant talent supply | √ | | | As a new-generation product, it’s still difficult to find talents with TDengine experiences from market. However, the learning cost is low. As the vendor, we also provide extensive operation training and counselling services. | \ No newline at end of file diff --git a/documentation20/en/02.getting-started/docs.md b/documentation20/en/02.getting-started/docs.md index 6941e44cf54fc03f40685ca85d593e54b475b1a4..307ccadf9a1f41b56f56e18fcbdc055df3255b21 100644 --- a/documentation20/en/02.getting-started/docs.md +++ b/documentation20/en/02.getting-started/docs.md @@ -2,7 +2,7 @@ ## Quick Install -TDengine software consists of 3 components: server, client, and alarm module. At the moment, TDengine server only runs on Linux (Windows, mac OS and more OS supports will come soon), but client can run on either Windows or Linux. TDengine client can be installed and run on Windows or Linux. Applications based-on any OSes can all connect to server taosd via a RESTful interface. About CPU, TDengine supports X64/ARM64/MIPS64/Alpha64, and ARM32、RISC-V, other more CPU architectures will be supported soon. You can set up and install TDengine server either from the [source code](https://www.taosdata.com/en/getting-started/#Install-from-Source) or the [packages](https://www.taosdata.com/en/getting-started/#Install-from-Package). +TDengine software consists of 3 parts: server, client, and alarm module. At the moment, TDengine server only runs on Linux (Windows, mac OS and more OS supports will come soon), but client can run on either Windows or Linux. TDengine client can be installed and run on Windows or Linux. Applications based-on any OSes can all connect to server taosd via a RESTful interface. About CPU, TDengine supports X64/ARM64/MIPS64/Alpha64, and ARM32、RISC-V, other more CPU architectures will be supported soon. You can set up and install TDengine server either from the [source code](https://www.taosdata.com/en/getting-started/#Install-from-Source) or the [packages](https://www.taosdata.com/en/getting-started/#Install-from-Package). ### Install from Source @@ -10,13 +10,11 @@ Please visit our [TDengine github page](https://github.com/taosdata/TDengine) fo ### Install from Docker Container -For the time being, it is not recommended to use Docker to deploy the client or server side of TDengine in production environments, but it is convenient to use Docker to deploy in development environments or when trying it for the first time. In particular, with Docker, it is easy to try TDengine in Mac OS X and Windows environments. - -Please refer to the detailed operation in [Quickly experience TDengine through Docker](https://www.taosdata.com/en/documentation/getting-started/docker). +Please visit our [TDengine Official Docker Image: Distribution, Downloading, and Usage](https://www.taosdata.com/blog/2020/05/13/1509.html). ### Install from Package -It’s extremely easy to install for TDengine, which takes only a few seconds from downloaded to successful installed. The server installation package includes clients and connectors. We provide 3 installation packages, which you can choose according to actual needs: +Three different packages for TDengine server are provided, please pick up the one you like. (Lite packages only have execution files and connector of C/C++, but standard packages support connectors of nearly all programming languages.) Beta version has more features, but we suggest you to install stable version for production or testing. Click [here](https://www.taosdata.com/en/getting-started/#Install-from-Package) to download the install package. @@ -131,7 +129,7 @@ After starting the TDengine server, you can execute the command `taosdemo` in th $ taosdemo ``` -Using this command, a STable named `meters` will be created in the database `test` There are 10k tables under this stable, named from `t0` to `t9999`. In each table there are 100k rows of records, each row with columns （`f1`, `f2` and `f3`. The timestamp is from "2017-07-14 10:40:00 000" to "2017-07-14 10:41:39 999". Each table also has tags `areaid` and `loc`: `areaid` is set from 1 to 10, `loc` is set to "beijing" or "shanghai". +Using this command, a STable named `meters` will be created in the database `test`. There are 10k tables under this STable, named from `t0` to `t9999`. In each table there are 100k rows of records, each row with columns （`f1`, `f2` and `f3`. The timestamp is from "2017-07-14 10:40:00 000" to "2017-07-14 10:41:39 999". Each table also has tags `areaid` and `loc`: `areaid` is set from 1 to 10, `loc` is set to "beijing" or "shanghai". It takes about 10 minutes to execute this command. Once finished, 1 billion rows of records will be inserted. @@ -201,7 +199,7 @@ Note: ● has been verified by official tests; ○ has been verified by unoffici List of platforms supported by TDengine client and connectors -At the moment, TDengine connectors can support a wide range of platforms, including hardware platforms such as X64/X86/ARM64/ARM32/MIPS/Alpha, and development environments such as Linux/Win64/Win32. +At the moment, TDengine connectors can support a wide range of platforms, including hardware platforms such as X64/X86/ARM64/ARM32/MIPS/Alpha, and operating system such as Linux/Win64/Win32. Comparison matrix as following: @@ -218,4 +216,4 @@ Comparison matrix as following: Note: ● has been verified by official tests; ○ has been verified by unofficial tests. -Please visit [Connectors](https://www.taosdata.com/en/documentation/connector) section for more detailed information. +Please visit Connectors section for more detailed information. \ No newline at end of file diff --git a/documentation20/en/03.architecture/docs.md b/documentation20/en/03.architecture/docs.md index ac6c94fe40f0283d31ee85d8f1c3c09c82605e2a..b1d47684c3885204c230ee5216c48a3db852996f 100644 --- a/documentation20/en/03.architecture/docs.md +++ b/documentation20/en/03.architecture/docs.md @@ -4,7 +4,7 @@ ### A Typical IoT Scenario -In typical IoT, Internet of Vehicles and Operation Monitoring scenarios, there are often many different types of data collecting devices that collect one or more different physical metrics. However, for the collection devices of the same type, there are often many specific collection devices distributed in places. BigData processing system aims to collect all kinds of data, and then calculate and analyze them. For the same kind of devices, the data collected are very regular. Taking smart meters as an example, assuming that each smart meter collects three metrics of current, voltage and phase, the collected data are similar to the following table: +In typical industry IoT, Internet of Vehicles and Operation Monitoring scenarios, there are often many different types of data collecting devices that collect one or more different physical metrics. However, for the data collection devices of the same type, there are often many specific collection devices distributed in places. Big Data processing system aims to collect all kinds of data, and then store and analyze them. For the same kind of devices, the data collected are very structured. Taking smart meters as an example, assuming that each smart meter collects three metrics of current, voltage and phase, the collected data are similar to the following table:
@@ -108,48 +108,48 @@ Each data record contains the device ID, timestamp, collected metrics (current, As the data points are a series of data points over time, the data points generated by IoT, Internet of Vehicles, and Operation Monitoring have some strong common characteristics: -1. Metrics are always structured data; -2. There are rarely delete/update operations on collected data; -3. No need for transactions of traditional databases -4. The ratio of reading is lower but write is higher than typical Internet applications; -5. data flow is uniform and can be predicted according to the number of devices and collection frequency; +1. metrics are always structured data; +2. there are rarely delete/update operations on collected data; +3. unlike traditional databases, transaction processing is not required; +4. the ratio of writing over reading is much higher than typical Internet applications; +5. data volume is stable and can be predicted according to the number of devices and sampling rate; 6. the user pays attention to the trend of data, not a specific value at a specific time; 7. there is always a data retention policy; 8. the data query is always executed in a given time range and a subset of space; -9. in addition to storage and query operations, various statistical and real-time calculation operations are also required; +9. in addition to storage and query operations, various statistical and real-time computing are also required; 10. data volume is huge, a system may generate over 10 billion data points in a day. -In light of the characteristics mentioned above, TDengine designs the storage and computing engine in a special and optimized way for time-series data, resulting in massive improvements in system efficiency. +By utilizing the above characteristics, TDengine designs the storage and computing engine in a special and optimized way for time-series data, resulting in massive improvements in system efficiency. ### Relational Database Model -Since time-series data is most likely to be structured data, TDengine adopts the traditional relational database model to process them with a shallow learning curve. You need to create a database, create tables with schema definitions, then insert data points and execute queries to explore the data. Standard SQL is used, instead of NoSQL’s key-value storage. +Since time-series data is most likely to be structured data, TDengine adopts the traditional relational database model to process them with a short learning curve. You need to create a database, create tables with schema definitions, then insert data points and execute queries to explore the data. SQL like syntax is used, instead of NoSQL’s key-value storage. -### One Table for One Collection Point +### One Table for One Data Collection Point -To utilize this time-series and other data features, TDengine requires the user to create a table for each collection point to store collected time-series data. For example, if there are over 10 millions smart meters, means 10 millions tables shall be created. For the table above, 4 tables shall be created for devices D1001, D1002, D1003, and D1004 to store the data collected. This design has several advantages: +To utilize this time-series and other data features, TDengine requires the user to create a table for each data collection point to store collected time-series data. For example, if there are over 10 millions smart meters, it means 10 millions tables shall be created. For the table above, 4 tables shall be created for devices D1001, D1002, D1003, and D1004 to store the data collected. This design has several advantages: -1. Guarantee that all data from a collection point can be saved in a continuous memory/hard disk space block by block. If queries are applied only on one point in a time range, this design will reduce the random read latency significantly, thus increase read and query speed by orders of magnitude. -2. Since the data generation process of each collection device is completely independent, means each device has its unique data source, thus writes can be carried out in a lock-free manner to greatly improve the speed. +1. Guarantee that all data from a data collection point can be saved in a continuous memory/hard disk space block by block. If queries are applied only on one data collection point in a time range, this design will reduce the random read latency significantly, thus increase read and query speed by orders of magnitude. +2. Since the data generation process of each data collection device is completely independent, and each data collection point has its unique data source, thus writes can be carried out in a lock-free manner to greatly improve the performance. 3. Write latency can be significantly reduced too as the data points generated by the same device will arrive in time order, the new data point will be simply appended to a block. -If the data of multiple devices are written into a table in the traditional way, due to the uncontrollable network delay, the timing of the data from different devices arriving at the server cannot be guaranteed, the writing operation must be protected by locks, and the data of one device cannot be guaranteed to continuously stored together. **The method of one table for each data collection point can ensure the optimal performance of insertion and query of a single data collection point to the greatest extent.** +If the data of multiple devices are written into a table in the traditional way, due to the uncontrollable network delay, the timing of the data from different devices arriving at the server cannot be guaranteed, the writing operation must be protected by locks, and the data of one device cannot be guaranteed to be continuously stored together. **One table for each data collection point can ensure the optimal performance of insert and query of a single data collection point to the greatest extent.** -TDengine suggests using collection point ID as the table name (like D1001 in the above table). Each point may collect one or more metrics (like the current, voltage, phase as above). Each metric has a column in the table. The data type for a column can be int, float, string and others. In addition, the first column in the table must be a timestamp. TDengine uses the time stamp as the index, and won’t build the index on any metrics stored. All data will be stored in columns. +TDengine suggests using data collection point ID as the table name (like D1001 in the above table). Each point may collect one or more metrics (like the current, voltage, phase as above). Each metric has a column in the table. The data type for a column can be int, float, string and others. In addition, the first column in the table must be a timestamp. TDengine uses the time stamp as the index, and won’t build the index on any metrics stored. All data will be stored in columns. ### STable: A Collection of Data Points in the Same Type -The method of one table for each point will bring a greatly increasing number of tables, which is difficult to manage. Moreover, applications often need to take aggregation operations between collection points, thus aggregation operations will become complicated. To support aggregation over multiple tables efficiently, the STable (Super Table) concept is introduced by TDengine. +The design of one table for each data collection point will require a huge number of tables, which is difficult to manage. Moreover, applications often need to take aggregation operations between data collection points, thus aggregation operations will become complicated. To support aggregation over multiple tables efficiently, the [STable(Super Table)](https://www.taosdata.com/en/documentation/super-table) concept is introduced by TDengine. -STable is an abstract collection for a type of data point. A STable contains a set of points (tables) that have the same schema or data structure, but with different static attributes (tags). To describe a STable (a combination of data collection points of a specific type), in addition to defining the table structure of the collected metrics, it is also necessary to define the schema of its tag. The data type of tags can be int, float, string, and there can be multiple tags, which can be added, deleted, or modified afterward. If the whole system has N different types of data collection points, N STables need to be established. +STable is an abstract set for a type of data collection point. A STable contains a set of data collection points (tables) that have the same schema or data structure, but with different static attributes (tags). To describe a STable (a set of data collection points of a specific type), in addition to defining the table structure of the collected metrics, it is also necessary to define the schema of its tags. The data type of tags can be int, float, string, and there can be multiple tags, which can be added, deleted, or modified afterward. If the whole system has N different types of data collection points, N STables need to be established. In the design of TDengine, **a table is used to represent a specific data collection point, and STable is used to represent a set of data collection points of the same type**. When creating a table for a specific data collection point, the user uses the definition of STable as a template and specifies the tag value of the specific collection point (table). Compared with the traditional relational database, the table (a data collection point) has static tags, and these tags can be added, deleted, and modified afterward. **A STable contains multiple tables with the same time-series data schema but different tag values.** -When aggregating multiple data collection points with the same data type, TDEngine will first find out the tables that meet the tag filters from the STables, and then scan the time-series data of these tables to perform aggregation operation, which can greatly reduce the data sets to be scanned, thus greatly improving the performance of aggregation calculation. +When aggregating multiple data collection points with the same data type, TDengine will first find out the tables that meet the tag filter conditions from the STables, and then scan the time-series data of these tables to perform aggregation operation, which can greatly reduce the data sets to be scanned, thus greatly improving the performance of data aggregation. ## Cluster and Primary Logic Unit -The design of TDengine is based on the assumption that one single hardware or software system is unreliable and that no single computer can provide sufficient computing and storage resources to process massive data. Therefore, TDengine has been designed according to a distributed and high-reliability architecture since Day One of R&D, which supports scale-out, so that hardware failure or software failure of any single or multiple servers will not affect the availability and reliability of the system. At the same time, through node virtualization and automatic load-balancing technology, TDengine can make the most efficient use of computing and storage resources in heterogeneous clusters to reduce hardware investment. +The design of TDengine is based on the assumption that one single node or software system is unreliable and that no single node can provide sufficient computing and storage resources to process massive data. Therefore, TDengine has been designed in a distributed and high-reliability architecture since day one of the development, so that hardware failure or software failure of any single or multiple servers will not affect the availability and reliability of the system. At the same time, through node virtualization and automatic load-balancing technology, TDengine can make the most efficient use of computing and storage resources in heterogeneous clusters to reduce hardware investment. ### Primary Logic Unit @@ -168,21 +168,21 @@ A complete TDengine system runs on one or more physical nodes. Logically, it inc **Virtual node (vnode)**: In order to better support data sharding, load balancing and prevent data from overheating or skewing, data nodes are virtualized into multiple virtual nodes (vnode, V2, V3, V4, etc. in the figure). Each vnode is a relatively independent work unit, which is the basic unit of time-series data storage, and has independent running threads, memory space and persistent storage path. A vnode contains a certain number of tables (data collection points). When a new table is created, the system checks whether a new vnode needs to be created. The number of vnodes that can be created on a data node depends on the hardware capacities of the physical node where the data node is located. A vnode belongs to only one DB, but a DB can have multiple vnodes. In addition to the stored time-series data, a vnode also stores the schema and tag values of the included tables. A virtual node is uniquely identified in the system by the EP of the data node and the VGroup ID to which it belongs, and is created and managed by the management node. -**Management node (mnode)**: A virtual logical unit responsible for monitoring and maintaining the running status of all data nodes and load balancing among nodes (M in figure). At the same time, the management node is also responsible for the storage and management of metadata (including users, databases, tables, static tags, etc.), so it is also called Meta Node. Multiple (up to 5) mnodes can be configured in a TDengine cluster, and they are automatically constructed into a virtual management node group (M0, M1, M2 in the figure). The master/slave mechanism is used to manage between mnodes, and the data synchronization is carried out in a strong consistent way. Any data update operation can only be done on the master. The creation of mnode cluster is completed automatically by the system without manual intervention. There is at most one mnode on each dnode, which is uniquely identified by the EP of the data node to which it belongs. Each dnode automatically obtains the EP of the dnode where all mnodes in the whole cluster are located through internal messaging interaction. +**Management node (mnode)**: A virtual logical unit responsible for monitoring and maintaining the running status of all data nodes and load balancing among nodes (M in figure). At the same time, the management node is also responsible for the storage and management of metadata (including users, databases, tables, static tags, etc.), so it is also called Meta Node. Multiple (up to 5) mnodes can be configured in a TDengine cluster, and they are automatically constructed into a virtual management node group (M0, M1, M2 in the figure). The master/slave mechanism is adopted for the mnode group and the data synchronization is carried out in a strong consistent way. Any data update operation can only be executed on the master. The creation of mnode cluster is completed automatically by the system without manual intervention. There is at most one mnode on each dnode, which is uniquely identified by the EP of the data node to which it belongs. Each dnode automatically obtains the EP of the dnode where all mnodes in the whole cluster are located through internal messaging interaction. -**Virtual node group (VGroup)**: Vnodes on different data nodes can form a virtual node group to ensure the high reliability of the system. The virtual node group is managed in a master/slave structure. Write operations can only be performed on the master vnode, and the system synchronizes data to the slave vnode via replication, thus ensuring that one single replica of data is copied on multiple physical nodes. The number of virtual nodes in a vgroup equals the number of data replicas. If the number of replicas of a DB is N, the system must have at least N data nodes. The number of replicas can be specified by the parameter replica when creating DB, and the default is 1. Using the multi-replica feature of TDengine, the same high data reliability can be done without the need for expensive storage devices such as disk arrays. Virtual node group is created and managed by management node, and the management node assigns a system unique ID, aka VGroup ID. If two virtual nodes has the same vnode group ID, means that they belong to the same group and the data is backed up to each other. The number of virtual nodes in a virtual node group can be dynamically changed, allowing only one, that is, no data replication. VGroup ID is never changed. Even if a virtual node group is deleted, its ID will not be reused. +**Virtual node group (VGroup)**: Vnodes on different data nodes can form a virtual node group to ensure the high availability of the system. The virtual node group is managed in a master/slave mechanism. Write operations can only be performed on the master vnode, and then replicated to slave vnodes, thus ensuring that one single replica of data is copied on multiple physical nodes. The number of virtual nodes in a vgroup equals the number of data replicas. If the number of replicas of a DB is N, the system must have at least N data nodes. The number of replicas can be specified by the parameter `replica` when creating DB, and the default is 1. Using the multi-replication feature of TDengine, the same high data reliability can be achieved without the need for expensive storage devices such as disk arrays. Virtual node group is created and managed by management node, and the management node assigns a system unique ID, aka VGroup ID. If two virtual nodes has the same vnode group ID, means that they belong to the same group and the data is backed up to each other. The number of virtual nodes in a virtual node group can be dynamically changed, allowing only one, that is, no data replication. VGroup ID is never changed. Even if a virtual node group is deleted, its ID will not be reused. -**TAOSC**: TAOSC is the driver provided by TDengine to applications, which is responsible for dealing with the interface interaction between application and cluster, and provides the native interface of C/C++ language, which is embedded in JDBC, C #, Python, Go, Node.js language connection libraries. Applications interact with the whole cluster through taosc instead of directly connecting to data nodes in the cluster. This module is responsible for obtaining and caching metadata; forwarding requests for insertion, query, etc. to the correct data node; when returning the results to the application, taosc also need to be responsible for the final level of aggregation, sorting, filtering and other operations. For JDBC, C/C++/C #/Python/Go/Node.js interfaces, this module runs on the physical node where the application is located. At the same time, in order to support the fully distributed RESTful interface, taosc has a running instance on each dnode of TDengine cluster. +**TAOSC**: TAOSC is the driver provided by TDengine to applications, which is responsible for dealing with the interaction between application and cluster, and provides the native interface of C/C++ language, which is embedded in JDBC, C #, Python, Go, Node.js language connection libraries. Applications interact with the whole cluster through taosc instead of directly connecting to data nodes in the cluster. This module is responsible for obtaining and caching metadata; forwarding requests for insertion, query, etc. to the correct data node; when returning the results to the application, taosc also need to be responsible for the final level of aggregation, sorting, filtering and other operations. For JDBC, C/C++/C #/Python/Go/Node.js interfaces, this module runs on the physical node where the application is located. At the same time, in order to support the fully distributed RESTful interface, taosc has a running instance on each dnode of TDengine cluster. ### Node Communication -**Communication mode**: The communication among each data node of TDengine system, and among application driver and each data node is carried out through TCP/UDP. Considering an IoT scenario, the data writing packets are generally not large, so TDengine uses UDP in addition to TCP for transmission, because UDP is more efficient and is not limited by the number of connections. TDengine implements its own timeout, retransmission, confirmation and other mechanisms to ensure reliable transmission of UDP. For packets with a data volume of less than 15K, UDP is adopted for transmission, and TCP is automatically adopted for transmission of packets with a data volume of more than 15K or query operations. At the same time, TDengine will automatically compress/decompress the data, digital sign/authenticate the data according to the configuration and data packet. For data replication among data nodes, only TCP is used for data transmission. +**Communication mode**: The communication among each data node of TDengine system, and among application driver and each data node is carried out through TCP/UDP. Considering an IoT scenario, the data writing packets are generally not large, so TDengine uses UDP in addition to TCP for transmission, because UDP is more efficient and is not limited by the number of connections. TDengine implements its own timeout, retransmission, confirmation and other mechanisms to ensure reliable transmission of UDP. For packets with a data volume of less than 15K, UDP is adopted for transmission, and TCP is automatically adopted for transmission of packets with a data volume of more than 15K or query operations. At the same time, TDengine will automatically compress/decompress the data, digital sign/authenticate the data according to the configuration and data packet. For data replication among data nodes, only TCP is used for data transportation. -**FQDN configuration:** A data node has one or more FQDNs, which can be specified in the system configuration file taos.cfg with the parameter "fqdn". If it is not specified, the system will automatically use the hostname of the computer as its FQDN. If the node is not configured with FQDN, you can directly set the configuration parameter fqdn of the node to its IP address. However, IP is not recommended because IP address is variable, and once it changes, the cluster will not work properly. The EP (End Point) of a data node consists of FQDN + Port. With FQDN, it is necessary to ensure the normal operation of DNS service, or configure hosts files on nodes and the nodes where applications are located. +**FQDN configuration:** A data node has one or more FQDNs, which can be specified in the system configuration file taos.cfg with the parameter "fqdn". If it is not specified, the system will automatically use the hostname of the computer as its FQDN. If the node is not configured with FQDN, you can directly set the configuration parameter fqdn of the node to its IP address. However, IP is not recommended because IP address may be changed, and once it changes, the cluster will not work properly. The EP (End Point) of a data node consists of FQDN + Port. With FQDN, it is necessary to ensure the DNS service is running, or hosts files on nodes are configured properly. -**Port configuration**: The external port of a data node is determined by the system configuration parameter serverPort in TDengine, and the port for internal communication of cluster is serverPort+5. The data replication operation among data nodes in the cluster also occupies a TCP port, which is serverPort+10. In order to support multithreading and efficient processing of UDP data, each internal and external UDP connection needs to occupy 5 consecutive ports. Therefore, the total port range of a data node will be serverPort to serverPort + 10, for a total of 11 TCP/UDP ports. When using, make sure that the firewall keeps these ports open. Each data node can be configured with a different serverPort. +**Port configuration**: The external port of a data node is determined by the system configuration parameter serverPort in TDengine, and the port for internal communication of cluster is serverPort+5. The data replication operation among data nodes in the cluster also occupies a TCP port, which is serverPort+10. In order to support multithreading and efficient processing of UDP data, each internal and external UDP connection needs to occupy 5 consecutive ports. Therefore, the total port range of a data node will be serverPort to serverPort + 10, for a total of 11 TCP/UDP ports. To run the system, make sure that the firewall keeps these ports open. Each data node can be configured with a different serverPort. -**Cluster external connection**: TDengine cluster can accommodate one single, multiple or even thousands of data nodes. The application only needs to initiate a connection to any data node in the cluster. The network parameter required for connection is the End Point (FQDN plus configured port number) of a data node. When starting the application taos through CLI, the FQDN of the data node can be specified through the option-h, and the configured port number can be specified through -p. If the port is not configured, the system configuration parameter serverPort of TDengine will be adopted. +**Cluster external connection**: TDengine cluster can accommodate one single, multiple or even thousands of data nodes. The application only needs to initiate a connection to any data node in the cluster. The network parameter required for connection is the End Point (FQDN plus configured port number) of a data node. When starting the application taos through CLI, the FQDN of the data node can be specified through the option `-h`, and the configured port number can be specified through `-p`. If the port is not configured, the system configuration parameter serverPort of TDengine will be adopted. **Inter-cluster communication**: Data nodes connect with each other through TCP/UDP. When a data node starts, it will obtain the EP information of the dnode where the mnode is located, and then establish a connection with the mnode in the system to exchange information. There are three steps to obtain EP information of the mnode: 1. Check whether the mnodeEpList file exists, if it does not exist or cannot be opened normally to obtain EP information of the mnode, skip to the second step; 2: Check the system configuration file taos.cfg to obtain node configuration parameters firstEp and secondEp (the node specified by these two parameters can be a normal node without mnode, in this case, the node will try to redirect to the mnode node when connected). If these two configuration parameters do not exist or do not exist in taos.cfg, or are invalid, skip to the third step; 3: Set your own EP as a mnode EP and run it independently. After obtaining the mnode EP list, the data node initiates the connection. It will successfully join the working cluster after connected. If not successful, it will try the next item in the mnode EP list. If all attempts are made, but the connection still fails, sleep for a few seconds before trying again. @@ -192,7 +192,7 @@ A complete TDengine system runs on one or more physical nodes. Logically, it inc **Redirection**: No matter about dnode or taosc, the connection to the mnode shall be initiated first, but the mnode is automatically created and maintained by the system, so user does not know which dnode is running the mnode. TDengine only requires a connection to any working dnode in the system. Because any running dnode maintains the currently running mnode EP List, when receiving a connecting request from the newly started dnode or taosc, if it’s not an mnode by self, it will reply the mnode EP List back. After receiving this list, taosc or the newly started dnode will try to establish the connection again. When the mnode EP List changes, each data node quickly obtains the latest list and notifies taosc through messaging interaction among nodes. -### A Typical Messaging Process +### A Typical Data Writinfg Process To explain the relationship between vnode, mnode, taosc and application and their respective roles, the following is an analysis of a typical data writing process. @@ -200,62 +200,62 @@ To explain the relationship between vnode, mnode, taosc and application and thei
Picture 2 typical process of TDengine
1. Application initiates a request to insert data through JDBC, ODBC, or other APIs. -2. Cache be checked by taosc that if meta data existing for the table. If so, go straight to Step 4. If not, taosc sends a get meta-data request to mnode. +2. taosc checks if meta data existing for the table in the cache. If so, go straight to Step 4. If not, taosc sends a get meta-data request to mnode. 3. Mnode returns the meta-data of the table to taosc. Meta-data contains the schema of the table, and also the vgroup information to which the table belongs (the vnode ID and the End Point of the dnode where the table belongs. If the number of replicas is N, there will be N groups of End Points). If taosc does not receive a response from the mnode for a long time, and there are multiple mnodes, taosc will send a request to the next mnode. 4. Taosc initiates an insert request to master vnode. -5. After vnode inserts the data, it gives a reply to taosc, indicating that the insertion is successful. If taosc doesn't get a response from vnode for a long time, taosc will judge the node as offline. In this case, if there are multiple replicas of the inserted database, taosc will issue an insert request to the next vnode in vgroup. +5. After vnode inserts the data, it gives a reply to taosc, indicating that the insertion is successful. If taosc doesn't get a response from vnode for a long time, taosc will treat this node as offline. In this case, if there are multiple replicas of the inserted database, taosc will issue an insert request to the next vnode in vgroup. 6. Taosc notifies APP that writing is successful. -For Step 2 and 3, when taosc starts, it does not know the End Point of mnode, so it will directly initiate a request to the externally serving End Point of the configured cluster. If the dnode that received the request does not have an mnode configured, it will inform the mnode EP list in a reply message, so that taosc will re-issue a request to obtain meta-data to the EP of another new mnode. +For Step 2 and 3, when taosc starts, it does not know the End Point of mnode, so it will directly initiate a request to the configured serving End Point of the cluster. If the dnode that receives the request does not have an mnode configured, it will inform the mnode EP list in a reply message, so that taosc will re-issue a request to obtain meta-data to the EP of another new mnode. -For Step 4 and 5, without caching, taosc can't recognize the master in the virtual node group, so assumes that the first vnodeID is the master and send a request to it. If the requested vnode is not the master, it will reply the actual master as a new target taosc makes a request to. Once the reply of successful insertion is obtained, taosc will cache the information of master node. +For Step 4 and 5, without caching, taosc can't recognize the master in the virtual node group, so assumes that the first vnode is the master and sends a request to it. If this vnode is not the master, it will reply the actual master as a new target where taosc shall send a request to. Once the reply of successful insertion is obtained, taosc will cache the information of master node. -The above is the process of inserting data, and the processes of querying and calculating are completely consistent. Taosc encapsulates and shields all these complicated processes, and has no perception and no special treatment for applications. +The above is the process of inserting data, and the processes of querying and computing are the same. Taosc encapsulates and hides all these complicated processes, and it is transparent to applications. -Through taosc caching mechanism, mnode needs to be accessed only when a table is operated for the first time, so mnode will not become a system bottleneck. However, because schema and vgroup may change (such as load balancing), taosc will interact with mnode regularly to automatically update the cache. +Through taosc caching mechanism, mnode needs to be accessed only when a table is accessed for the first time, so mnode will not become a system bottleneck. However, because schema and vgroup may change (such as load balancing), taosc will interact with mnode regularly to automatically update the cache. ## Storage Model and Data Partitioning/Sharding ### Storage Model -The data stored by TDengine include collected time-series data, metadata related to libraries and tables, tag data, etc. These data are specifically divided into three parts: +The data stored by TDengine include collected time-series data, metadata related to database and tables, tag data, etc. These data are specifically divided into three parts: -- Time-series data: stored in vnode and composed of data, head and last files. The amount of data is large and query amount depends on the application scenario. Out-of-order writing is allowed, but delete operation is not supported for the time being, and update operation is only allowed when update parameter is set to 1. By adopting the model with one table for each collection point, the data of a given time period is continuously stored, and the writing against one single table is a simple add operation. Multiple records can be read at one time, thus ensuring the insert and query operation of a single collection point with best performance. -- Tag data: meta files stored in vnode support four standard operations of add, delete, modify and check. The amount of data is not large. If there are N tables, there are N records, so all can be stored in memory. If there are many tag filtering operations, queries will be very frequent and TDengine supports multi-core and multi-threaded concurrent queries. As long as the computing resources are sufficient, even in face of millions of tables, the filtering results will return in milliseconds. -- Metadata: stored in mnode, including system node, user, DB, Table Schema and other information. Four standard operations of add, delete, modify and query are supported. The amount of these data are not large and can be stored in memory, moreover the query amount is not large because of the client cache. Therefore, TDengine uses centralized storage management, however, there will be no performance bottleneck. +- Time-series data: stored in vnode and composed of data, head and last files. The amount of data is large and query amount depends on the application scenario. Out-of-order writing is allowed, but delete operation is not supported for the time being, and update operation is only allowed when database update parameter is set to 1. By adopting the model with one table for each data collection point, the data of a given time period is continuously stored, and the writing against one single table is a simple appending operation. Multiple records can be read at one time, thus ensuring the insert and query operation of a single data collection point with best performance. +- Tag data: meta files stored in vnode. Four standard operations of create, read, update and delete are supported. The amount of data is not large. If there are N tables, there are N records, so all can be stored in memory. To make tag filtering efficient, TDengine supports multi-core and multi-threaded concurrent queries. As long as the computing resources are sufficient, even in face of millions of tables, the tag filtering results will return in milliseconds. +- Metadata: stored in mnode, including system node, user, DB, Table Schema and other information. Four standard operations of create, delete, update and read are supported. The amount of these data are not large and can be stored in memory, moreover the query amount is not large because of the client cache. Therefore, TDengine uses centralized storage management, however, there will be no performance bottleneck. Compared with the typical NoSQL storage model, TDengine stores tag data and time-series data completely separately, which has two major advantages: -- Greatly reduce the redundancy of tag data storage: general NoSQL database or time-series database adopts K-V storage, in which Key includes timestamp, device ID and various tags. Each record carries these duplicates, so wasting storage space. Moreover, if the application needs to add, modify or delete tags on historical data, it has to traverse the data and rewrite again, which is extremely expensive to operate. -- Realize extremely efficient aggregation query between multiple tables: when doing aggregation query between multiple tables, it firstly finds out the tag filtered tables, and then find out the corresponding data blocks of these tables to greatly reduce the data sets to be scanned, thus greatly improving the query efficiency. Moreover, tag data is managed and maintained in a full-memory structure, and tag data queries in tens of millions can return in milliseconds. +- Greatly reduce the redundancy of tag data storage: general NoSQL database or time-series database adopts K-V storage, in which Key includes timestamp, device ID and various tags. Each record carries these duplicated tags, so storage space is wasted. Moreover, if the application needs to add, modify or delete tags on historical data, it has to traverse the data and rewrite them again, which is extremely expensive to operate. +- Aggregate data efficiently between multiple tables: when aggregating data between multiple tables, it firstly finds out the tables which satisfy the filtering conditions, and then find out the corresponding data blocks of these tables to greatly reduce the data sets to be scanned, thus greatly improving the aggregation efficiency. Moreover, tag data is managed and maintained in a full-memory structure, and tag data queries in tens of millions can return in milliseconds. ### Data Sharding -For large-scale data management, to achieve scale-out, it is generally necessary to adopt the a Partitioning strategy as Sharding. TDengine implements data sharding via vnode, and time-series data partitioning via one data file for each time range. +For large-scale data management, to achieve scale-out, it is generally necessary to adopt the Partitioning or Sharding strategy. TDengine implements data sharding via vnode, and time-series data partitioning via one data file for each time range. -VNode (Virtual Data Node) is responsible for providing writing, query and calculation functions for collected time-series data. To facilitate load balancing, data recovery and support heterogeneous environments, TDengine splits a data node into multiple vnodes according to its computing and storage resources. The management of these vnodes is done automatically by TDengine and completely transparent to the application. +VNode (Virtual Data Node) is responsible for providing writing, query and computing functions for collected time-series data. To facilitate load balancing, data recovery and support heterogeneous environments, TDengine splits a data node into multiple vnodes according to its computing and storage resources. The management of these vnodes is done automatically by TDengine and completely transparent to the application. For a single data collection point, regardless of the amount of data, a vnode (or vnode group, if the number of replicas is greater than 1) has enough computing resource and storage resource to process (if a 16-byte record is generated per second, the original data generated in one year will be less than 0.5 G), so TDengine stores all the data of a table (a data collection point) in one vnode instead of distributing the data to two or more dnodes. Moreover, a vnode can store data from multiple data collection points (tables), and the upper limit of the tables’ quantity for a vnode is one million. By design, all tables in a vnode belong to the same DB. On a data node, unless specially configured, the number of vnodes owned by a DB will not exceed the number of system cores. When creating a DB, the system does not allocate resources immediately. However, when creating a table, the system will check if there is an allocated vnode with free tablespace. If so, the table will be created in the vacant vnode immediately. If not, the system will create a new vnode on a dnode from the cluster according to the current workload, and then a table. If there are multiple replicas of a DB, the system does not create only one vnode, but a vgroup (virtual data node group). The system has no limit on the number of vnodes, which is just limited by the computing and storage resources of physical nodes. -The meda data of each table (including schema, tags, etc.) is also stored in vnode instead of centralized storage in mnode. In fact, this means sharding of meta data, which is convenient for efficient and parallel tag filtering operations. +The meda data of each table (including schema, tags, etc.) is also stored in vnode instead of centralized storage in mnode. In fact, this means sharding of meta data, which is good for efficient and parallel tag filtering operations. ### Data Partitioning -In addition to vnode sharding, TDengine partitions the time-series data by time range. Each data file contains only one time range of time-series data, and the length of the time range is determined by DB's configuration parameter “days”. This method of partitioning by time rang is also convenient to efficiently implement the data retention strategy. As long as the data file exceeds the specified number of days (system configuration parameter ‘keep’), it will be automatically deleted. Moreover, different time ranges can be stored in different paths and storage media, so as to facilitate the cold/hot management of big data and realize tiered-storage. +In addition to vnode sharding, TDengine partitions the time-series data by time range. Each data file contains only one time range of time-series data, and the length of the time range is determined by DB's configuration parameter “`days`”. This method of partitioning by time rang is also convenient to efficiently implement the data retention policy. As long as the data file exceeds the specified number of days (system configuration parameter "`keep`"), it will be automatically deleted. Moreover, different time ranges can be stored in different paths and storage media, so as to facilitate the tiered-storage. Cold/hot data can be stored in different storage meida to reduce the storage cost. -In general, **TDengine splits big data by vnode and time as two dimensions**, which is convenient for parallel and efficient management with scale-out. +In general, **TDengine splits big data by vnode and time range in two dimensions** to manage the data efficiently with horizontal scalability. ### Load Balancing -Each dnode regularly reports its status (including hard disk space, memory size, CPU, network, number of virtual nodes, etc.) to the mnode (virtual management node) for declaring the status of the entire cluster. Based on the overall state, when an mnode finds an overloaded dnode, it will migrate one or more vnodes to other dnodes. In the process, external services keep running and the data insertion, query and calculation operations are not affected. +Each dnode regularly reports its status (including hard disk space, memory size, CPU, network, number of virtual nodes, etc.) to the mnode (virtual management node), so mnode knows the status of the entire cluster. Based on the overall status, when the mnode finds a dnode is overloaded, it will migrate one or more vnodes to other dnodes. During the process, TDengine services keep running and the data insertion, query and computing operations are not affected. -If the mnode has not received the dnode status for a period of time, the dnode will be judged as offline. When offline lasts a certain period of time (the duration is determined by the configuration parameter ‘offlineThreshold’), the dnode will be forcibly removed from the cluster by mnode. If the number of replicas of vnodes on this dnode is greater than one, the system will automatically create new replicas on other dnodes to ensure the replica number. If there are other mnodes on this dnode and the number of mnodes replicas is greater than one, the system will automatically create new mnodes on other dnodes to ensure t the replica number. +If the mnode has not received the dnode status for a period of time, the dnode will be treated as offline. When offline lasts a certain period of time (configured by parameter ‘`offlineThreshold`’), the dnode will be forcibly removed from the cluster by mnode. If the number of replicas of vnodes on this dnode is greater than one, the system will automatically create new replicas on other dnodes to ensure the replica number. If there are other mnodes on this dnode and the number of mnodes replicas is greater than one, the system will automatically create new mnodes on other dnodes to ensure the replica number. -When new data nodes are added to the cluster, with new computing and storage are added, the system will automatically start the load balancing process. +When new data nodes are added to the cluster, with new computing and storage resources are added, the system will automatically start the load balancing process. -The load balancing process does not require any manual intervention without application restarted. It will automatically connect new nodes with completely transparence. **Note: load balancing is controlled by parameter “balance”, which determines to turn on/off automatic load balancing.** +The load balancing process does not require any manual intervention, and it is transparent to the application. **Note: load balancing is controlled by parameter “balance”, which determines to turn on/off automatic load balancing.** ## Data Writing and Replication Process @@ -267,8 +267,8 @@ Master Vnode uses a writing process as follows: Figure 3: TDengine Master writing process -1. Master vnode receives the application data insertion request, verifies, and to next step; -2. If the system configuration parameter “walLevel” is greater than 0, vnode will write the original request packet into database log file WAL. If walLevel is set to 2 and fsync is set to 0, TDengine will make WAL data written immediately to ensure that even system goes down, all data can be recovered from database log file; +1. Master vnode receives the application data insertion request, verifies, and moves to next step; +2. If the system configuration parameter “`walLevel`” is greater than 0, vnode will write the original request packet into database log file WAL. If walLevel is set to 2 and fsync is set to 0, TDengine will make WAL data written immediately to ensure that even system goes down, all data can be recovered from database log file; 3. If there are multiple replicas, vnode will forward data packet to slave vnodes in the same virtual node group, and the forwarded packet has a version number with data; 4. Write into memory and add the record to “skip list”; 5. Master vnode returns a confirmation message to the application, indicating a successful writing. @@ -285,27 +285,27 @@ For a slave vnode, the write process as follows: 2. If the system configuration parameter “walLevel” is greater than 0, vnode will write the original request packet into database log file WAL. If walLevel is set to 2 and fsync is set to 0, TDengine will make WAL data written immediately to ensure that even system goes down, all data can be recovered from database log file; 3. Write into memory and add the record to “skip list”; -Compared with Master vnode, slave vnode has no forwarding or reply confirmation step, means two steps less. But writing into memory is exactly the same as WAL. +Compared with Master vnode, slave vnode has no forwarding or reply confirmation step, means two steps less. But writing into memory and WAL is exactly the same. ### Remote Disaster Recovery and IDC Migration -As above Master and Slave processes discussed, TDengine adopts asynchronous replication for data synchronization. This method can greatly improve the writing performance, with not obvious impact from network delay. By configuring IDC and rack number for each physical node, it can be ensured that for a virtual node group, virtual nodes are composed of physical nodes from different IDC and different racks, thus implementing remote disaster recovery without other tools. +As above Master and Slave processes discussed, TDengine adopts asynchronous replication for data synchronization. This method can greatly improve the writing performance, with no obvious impact from network delay. By configuring IDC and rack number for each physical node, it can be ensured that for a virtual node group, virtual nodes are composed of physical nodes from different IDC and different racks, thus implementing remote disaster recovery without other tools. -On the other hand, TDengine supports dynamic modification of the replicas number. Once the number of replicas increases, the newly added virtual nodes will immediately enter the data synchronization process. After synchronization completed, added virtual nodes can provide services. In the synchronization process, master and other synchronized virtual nodes keep serving. With this feature, TDengine can realize IDC room migration without service interruption. It is only necessary to add new physical nodes to the existing IDC cluster, and then remove old physical nodes after the data synchronization is completed. +On the other hand, TDengine supports dynamic modification of the replicas number. Once the number of replicas increases, the newly added virtual nodes will immediately enter the data synchronization process. After synchronization completed, added virtual nodes can provide services. In the synchronization process, master and other synchronized virtual nodes keep serving. With this feature, TDengine can provide IDC migration without service interruption. It is only necessary to add new physical nodes to the existing IDC cluster, and then remove old physical nodes after the data synchronization is completed. -However, this asynchronous replication method has a tiny time window of written data lost. The specific scenario is as follows: +However, the asynchronous replication has a tiny time window where data can be lost. The specific scenario is as follows: -1. Master vnode has completed its 5-step operations, confirmed the success of writing to APP, and then went down; +1. Master vnode has finished its 5-step operations, confirmed the success of writing to APP, and then went down; 2. Slave vnode receives the write request, then processing fails before writing to the log in Step 2; 3. Slave vnode will become the new master, thus losing one record -In theory, as long as in asynchronous replication, there is no guarantee for no losing. However, this window is extremely small, only if mater and slave fail at the same time, and just confirm the successful write to the application before. +In theory, for asynchronous replication, there is no guarantee to prevent data loss. However, this window is extremely small, only if mater and slave fail at the same time, and just confirm the successful write to the application before. Note: Remote disaster recovery and no-downtime IDC migration are only supported by Enterprise Edition. **Hint: This function is not available yet** ### Master/slave Selection -Vnode maintains a Version number. When memory data is persisted, the version number will also be persisted. For each data update operation, whether it is collecting time-series data or metadata, this version number will be increased by one. +Vnode maintains a version number. When memory data is persisted, the version number will also be persisted. For each data update operation, whether it is time-series data or metadata, this version number will be increased by one. When a vnode starts, the roles (master, slave) are uncertain, and the data is in an unsynchronized state. It’s necessary to establish TCP connections with other nodes in the virtual node group and exchange status, including version and its own roles. Through the exchange, the system implements a master-selection process. The rules are as follows: @@ -318,7 +318,7 @@ See [TDengine 2.0 Data Replication Module Design](https://www.taosdata.com/cn/do ### Synchronous Replication -For scenarios with higher data consistency requirements, asynchronous data replication is not applicable, because there is some small probability of data loss. So, TDengine provides a synchronous replication mechanism for users. When creating a database, in addition to specifying the number of replicas, user also needs to specify a new parameter “quorum”. If quorum is greater than one, it means that every time the Master forwards a message to the replica, it needs to wait for “quorum-1” reply confirms before informing the application that data has been successfully written in slave. If “quorum-1” reply confirms are not received within a certain period of time, the master vnode will return an error to the application. +For scenarios with strong data consistency requirements, asynchronous data replication is not applicable, because there is a small probability of data loss. So, TDengine provides a synchronous replication mechanism for users. When creating a database, in addition to specifying the number of replicas, user also needs to specify a new parameter “quorum”. If quorum is greater than one, it means that every time the Master forwards a message to the replica, it needs to wait for “quorum-1” reply confirms before informing the application that data has been successfully written in slave. If “quorum-1” reply confirms are not received within a certain period of time, the master vnode will return an error to the application. With synchronous replication, performance of system will decrease and latency will increase. Because metadata needs strong consistent, the default for data synchronization between mnodes is synchronous replication. @@ -336,17 +336,17 @@ Each vnode has its own independent memory, and it is composed of multiple memory TDengine uses a data-driven method to write the data from buffer into hard disk for persistent storage. When the cached data in vnode reaches a certain volume, TDengine will also pull up the disk-writing thread to write the cached data into persistent storage in order not to block subsequent data writing. TDengine will open a new database log file when the data is written, and delete the old database log file after written successfully to avoid unlimited log growth. -To make full use of the characteristics of time-series data, TDengine splits the data stored in persistent storage by a vnode into multiple files, each file only saves data for a fixed number of days, which is determined by the system configuration parameter “days”. By so, for the given start and end date of a query, you can locate the data files to open immediately without any index, thus greatly speeding up reading operations. +To make full use of the characteristics of time-series data, TDengine splits the data stored in persistent storage by a vnode into multiple files, each file only saves data for a fixed number of days, which is determined by the system configuration parameter “`days`”. By so, for the given start and end date of a query, you can locate the data files to open immediately without any index, thus greatly speeding up reading operations. -For collected data, there is generally a retention period, which is determined by the system configuration parameter “keep”. Data files exceeding this set number of days will be automatically deleted by the system to free up storage space. +For time-series data, there is generally a retention policy, which is determined by the system configuration parameter “`keep`”. Data files exceeding this set number of days will be automatically deleted by the system to free up storage space. Given “days” and “keep” parameters, the total number of data files in a vnode is: keep/days. The total number of data files should not be too large or too small. 10 to 100 is appropriate. Based on this principle, reasonable days can be set. In the current version, parameter “keep” can be modified, but parameter “days” cannot be modified once it is set. -In each data file, the data of a table is stored by blocks. A table can have one or more data file blocks. In a file block, data is stored in columns, occupying a continuous storage space, thus greatly improving the reading speed. The size of file block is determined by the system parameter “maxRows” (the maximum number of records per block), and the default value is 4096. This value should not be too large or too small. If it is too large, the data locating in search will cost longer; if too small, the index of data block is too large, and the compression efficiency will be low with slower reading speed. +In each data file, the data of a table is stored by blocks. A table can have one or more data file blocks. In a file block, data is stored in columns, occupying a continuous storage space, thus greatly improving the reading speed. The size of file block is determined by the system parameter “`maxRows`” (the maximum number of records per block), and the default value is 4096. This value should not be too large or too small. If it is too large, the data locating in search will cost longer; if too small, the index of data block is too large, and the compression efficiency will be low with slower reading speed. -Each data file (with a .data postfix) has a corresponding index file (with a .head postfix). The index file has summary information of a data block for each table, recording the offset of each data block in the data file, start and end time of data and other information, so as to lead system quickly locate the data to be found. Each data file also has a corresponding last file (with a .last postfix), which is designed to prevent data block fragmentation when written in disk. If the number of written records from a table does not reach the system configuration parameter “minRows” (minimum number of records per block), it will be stored in the last file first. When write to disk next time, the newly written records will be merged with the records in last file and then written into data file. +Each data file (with a .data postfix) has a corresponding index file (with a .head postfix). The index file has summary information of a data block for each table, recording the offset of each data block in the data file, start and end time of data and other information, so as to lead system quickly locate the data to be found. Each data file also has a corresponding last file (with a .last postfix), which is designed to prevent data block fragmentation when written in disk. If the number of written records from a table does not reach the system configuration parameter “`minRows`” (minimum number of records per block), it will be stored in the last file first. When write to disk next time, the newly written records will be merged with the records in last file and then written into data file. -When data is written to disk, it is decided whether to compress the data according to system configuration parameter “comp”. TDengine provides three compression options: no compression, one-stage compression and two-stage compression, corresponding to comp values of 0, 1 and 2 respectively. One-stage compression is carried out according to the type of data. Compression algorithms include delta-delta coding, simple 8B method, zig-zag coding, LZ4 and other algorithms. Two-stage compression is based on one-stage compression and compressed by general compression algorithm, which has higher compression ratio. +When data is written to disk, it is decided whether to compress the data according to system configuration parameter “`comp`”. TDengine provides three compression options: no compression, one-stage compression and two-stage compression, corresponding to comp values of 0, 1 and 2 respectively. One-stage compression is carried out according to the type of data. Compression algorithms include delta-delta coding, simple 8B method, zig-zag coding, LZ4 and other algorithms. Two-stage compression is based on one-stage compression and compressed by general compression algorithm, which has higher compression ratio. ### Tiered Storage @@ -393,17 +393,15 @@ When client obtains query result, the worker thread in query execution queue of ### Aggregation by Time Axis, Downsampling, Interpolation -The remarkable feature that time-series data is different from ordinary data is that each record has a timestamp, so aggregating data with timestamps on the time axis is an important and unique function from common databases. From this point of view, it is similar to the window query of stream computing engine. +The remarkable feature that time-series data is different from ordinary data is that each record has a timestamp, so aggregating data with timestamps on the time axis is an important and distinct feature from common databases. From this point of view, it is similar to the window query of stream computing engine. -The keyword “interval” is introduced into TDengine to split fixed length time windows on time axis, and the data are aggregated according to time windows, and the data within window range are aggregated as needed. For example: +The keyword “`interval`” is introduced into TDengine to split fixed length time windows on time axis, and the data are aggregated based on time windows, and the data within window range are aggregated as needed. For example: ```mysql select count(*) from d1001 interval(1h); ``` -According to the data collected by device D1001, the number of records stored per hour is returned by a 1-hour time window. - - +For the data collected by device D1001, the number of records stored per hour is returned by a 1-hour time window. In application scenarios where query results need to be obtained continuously, if there is data missing in a given time interval, the data results in this interval will also be lost. TDengine provides a strategy to interpolate the results of timeline aggregation calculation. The results of time axis aggregation can be interpolated by using keyword Fill. For example: @@ -411,11 +409,11 @@ In application scenarios where query results need to be obtained continuously, i select count(*) from d1001 interval(1h) fill(prev); ``` -According to the data collected by device D1001, the number of records per hour is counted. If there is no data in a certain hour, statistical data of the previous hour is returned. TDengine provides forward interpolation (prev), linear interpolation (linear), NULL value populating (NULL), and specific value populating (value). +For the data collected by device D1001, the number of records per hour is counted. If there is no data in a certain hour, statistical data of the previous hour is returned. TDengine provides forward interpolation (prev), linear interpolation (linear), NULL value populating (NULL), and specific value populating (value). ### Multi-table Aggregation Query -TDengine creates a separate table for each data collection point, but in practical applications, it is often necessary to aggregate data from different collection points. In order to perform aggregation operations efficiently, TDengine introduces the concept of STable. STable is used to represent a specific type of data collection point. It is a table set containing multiple tables. The schema of each table in the set is completely consistent, but each table has its own static tag. The tags can be multiple and be added, deleted and modified at any time. Applications can aggregate or statistically operate all or a subset of tables under a STABLE by specifying tag filters, thus greatly simplifying the development of applications. The process is shown in the following figure: +TDengine creates a separate table for each data collection point, but in practical applications, it is often necessary to aggregate data from different data collection points. In order to perform aggregation operations efficiently, TDengine introduces the concept of STable. STable is used to represent a specific type of data collection point. It is a table set containing multiple tables. The schema of each table in the set is the same, but each table has its own static tag. The tags can be multiple and be added, deleted and modified at any time. Applications can aggregate or statistically operate all or a subset of tables under a STABLE by specifying tag filters, thus greatly simplifying the development of applications. The process is shown in the following figure: ![Diagram of multi-table aggregation query](page://images/architecture/multi_tables.png)
Picture 4 Diagram of multi-table aggregation query
@@ -427,8 +425,9 @@ TDengine creates a separate table for each data collection point, but in practic 5. Each vnode first finds out the set of tables within its own node that meet the tag filters from memory, then scans the stored time-series data, completes corresponding aggregation calculations, and returns result to taosc; 6. taosc finally aggregates the results returned by multiple data nodes and send them back to application. -Since TDengine stores tag data and time-series data separately in vnode, by filtering tag data in memory, the set of tables that need to participate in aggregation operation is first found, which greatly reduces the volume of data scanned and improves aggregation calculation speed. At the same time, because the data is distributed in multiple vnodes/dnodes, the aggregation calculation operation is carried out concurrently in multiple vnodes, which further improves the aggregation speed. Aggregation functions for ordinary tables and most operations are applicable to STables. The syntax is exactly the same. Please see TAOS SQL for details. +Since TDengine stores tag data and time-series data separately in vnode, by filtering tag data in memory, the set of tables that need to participate in aggregation operation is first found, which greatly reduces the volume of data scanned and improves aggregation speed. At the same time, because the data is distributed in multiple vnodes/dnodes, the aggregation operation is carried out concurrently in multiple vnodes, which further improves the aggregation speed. Aggregation functions for ordinary tables and most operations are applicable to STables. The syntax is exactly the same. Please see TAOS SQL for details. ### Precomputation In order to effectively improve the performance of query processing, based-on the unchangeable feature of IoT data, statistical information of data stored in data block is recorded in the head of data block, including max value, min value, and sum. We call it a precomputing unit. If the query processing involves all the data of a whole data block, the pre-calculated results are directly used, and no need to read the data block contents at all. Since the amount of pre-calculated data is much smaller than the actual size of data block stored on disk, for query processing with disk IO as bottleneck, the use of pre-calculated results can greatly reduce the pressure of reading IO and accelerate the query process. The precomputation mechanism is similar to the index BRIN (Block Range Index) of PostgreSQL. + diff --git a/documentation20/en/04.model/docs.md b/documentation20/en/04.model/docs.md index 08d952d317e30ef91dad32333c9abb0e646b8e48..e28dd906f3b1fae76cf6657c8f946468b92788f0 100644 --- a/documentation20/en/04.model/docs.md +++ b/documentation20/en/04.model/docs.md @@ -2,17 +2,15 @@ TDengine adopts a relational data model, so we need to build the "database" and "table". Therefore, for a specific application scenario, it is necessary to consider the design of the database, STable and ordinary table. This section does not discuss detailed syntax rules, but only concepts. -Please watch the [video tutorial](https://www.taosdata.com/blog/2020/11/11/1945.html) for data modeling. - ## Create a Database -Different types of data collection points often have different data characteristics, including frequency of data collecting, length of data retention time, number of replicas, size of data blocks, whether to update data or not, and so on. To ensure TDengine working with great efficiency in various scenarios, TDengine suggests creating tables with different data characteristics in different databases, because each database can be configured with different storage strategies. When creating a database, in addition to SQL standard options, the application can also specify a variety of parameters such as retention duration, number of replicas, number of memory blocks, time accuracy, max and min number of records in a file block, whether it is compressed or not, and number of days a data file will be overwritten. For example: +Different types of data collection points often have different data characteristics, including data sampling rate, length of data retention time, number of replicas, size of data blocks, whether to update data or not, and so on. To ensure TDengine working with great efficiency in various scenarios, TDengine suggests creating tables with different data characteristics in different databases, because each database can be configured with different storage strategies. When creating a database, in addition to SQL standard options, the application can also specify a variety of parameters such as retention duration, number of replicas, number of memory blocks, time resolution, max and min number of records in a file block, whether it is compressed or not, and number of days covered by a data file. For example: ```mysql CREATE DATABASE power KEEP 365 DAYS 10 BLOCKS 6 UPDATE 1; ``` -The above statement will create a database named “power”. The data of this database will be kept for 365 days (it will be automatically deleted 365 days later), one data file created per 10 days, and the number of memory blocks is 4 for data updating. For detailed syntax and parameters, please refer to [Data Management section of TAOS SQL](https://www.taosdata.com/en/documentation/taos-sql#management). +The above statement will create a database named “power”. The data of this database will be kept for 365 days (data will be automatically deleted 365 days later), one data file will be created per 10 days, the number of memory blocks is 4, and data updating is allowed. For detailed syntax and parameters, please refer to [Data Management section of TAOS SQL](https://www.taosdata.com/en/documentation/taos-sql#management). After the database created, please use SQL command USE to switch to the new database, for example: @@ -20,13 +18,12 @@ After the database created, please use SQL command USE to switch to the new data USE power; ``` -Replace the database operating in the current connection with “power”, otherwise, before operating on a specific table, you need to use "database name. table name" to specify the name of database to use. +Specify the database operating in the current connection with “power”, otherwise, before operating on a specific table, you need to use "database-name.table-name" to specify the name of database to use. **Note:** - Any table or STable belongs to a database. Before creating a table, a database must be created first. - Tables in two different databases cannot be JOIN. -- You need to specify a timestamp when creating and inserting records, or querying history records. ## Create a STable @@ -38,11 +35,11 @@ CREATE STABLE meters (ts timestamp, current float, voltage int, phase float) TAG **Note:** The STABLE keyword in this instruction needs to be written as TABLE in versions before 2.0.15. -Just like creating an ordinary table, you need to provide the table name (‘meters’ in the example) and the table structure Schema, that is, the definition of data columns. The first column must be a timestamp (‘ts’ in the example), the other columns are the physical metrics collected (current, volume, phase in the example), and the data types can be int, float, string, etc. In addition, you need to provide the schema of the tag (location, groupId in the example), and the data types of the tag can be int, float, string and so on. Static attributes of collection points can often be used as tags, such as geographic location of collection points, device model, device group ID, administrator ID, etc. The schema of the tag can be added, deleted and modified afterwards. Please refer to the [STable Management section of TAOS SQL](https://www.taosdata.com/cn/documentation/taos-sql#super-table) for specific definitions and details. +Just like creating an ordinary table, you need to provide the table name (‘meters’ in the example) and the table structure Schema, that is, the definition of data columns. The first column must be a timestamp (‘ts’ in the example), the other columns are the physical metrics collected (current, volume, phase in the example), and the data types can be int, float, string, etc. In addition, you need to provide the schema of the tag (location, groupId in the example), and the data types of the tag can be int, float, string and so on. Static attributes of data collection points can often be used as tags, such as geographic location of collection points, device model, device group ID, administrator ID, etc. The schema of the tags can be added, deleted and modified afterwards. Please refer to the [STable Management section of TAOS SQL](https://www.taosdata.com/cn/documentation/taos-sql#super-table) for specific definitions and details. -Each type of data collection point needs an established STable, so an IoT system often has multiple STables. For the power grid, we need to build a STable for smart meters, transformers, buses, switches, etc. For IoT, a device may have multiple data collection points (for example, a fan for wind-driven generator, some collection points capture parameters such as current and voltage, and some capture environmental parameters such as temperature, humidity and wind direction). In this case, multiple STables need to be established for corresponding types of devices. All collected physical metrics contained in one and the same STable must be collected at the same time (with a consistent timestamp). +A STable must be created for each type of data collection point, so an IoT system often has multiple STables. For the power grid, we need to build a STable for smart meters, a STable for transformers, a STable for buses, a STable for switches, etc. For IoT, a device may have multiple data collection points (for example, a fan for wind-driven generator, one data collection point captures metrics such as current and voltage, and one data collection point captures environmental parameters such as temperature, humidity and wind direction). In this case, multiple STables need to be established for corresponding types of devices. All metrics contained in a STable must be collected at the same time (with the same timestamp). -A STable allows up to 1024 columns. If the number of physical metrics collected at a collection point exceeds 1024, multiple STables need to be built to process them. A system can have multiple DBs, and a DB can have one or more STables. +A STable allows up to 1024 columns. If the number of metrics collected at a data collection point exceeds 1024, multiple STables need to be built to process them. A system can have multiple DBs, and a DB can have one or more STables. ## Create a Table @@ -54,22 +51,23 @@ CREATE TABLE d1001 USING meters TAGS ("Beijing.Chaoyang", 2); Where d1001 is the table name, meters is the name of the STable, followed by the specific tag value of tag Location as "Beijing.Chaoyang", and the specific tag value of tag groupId 2. Although the tag value needs to be specified when creating the table, it can be modified afterwards. Please refer to the [Table Management section of TAOS SQL](https://www.taosdata.com/en/documentation/taos-sql#table) for details. -**Note: ** At present, TDengine does not technically restrict the use of a STable of a database (dbA) as a template to create a sub-table of another database (dbB). This usage will be prohibited later, and it is not recommended to use this method to create a table. +**Note: ** At present, TDengine does not technically restrict the use of a STable of a database (dbA) as a template to create a sub-table of another database (dbB). This usage will be prohibited later, and it is not recommended to use this way to create a table. TDengine suggests to use the globally unique ID of data collection point as a table name (such as device serial number). However, in some scenarios, there is no unique ID, and multiple IDs can be combined into a unique ID. It is not recommended to use a unique ID as tag value. -**Automatic table creating** : In some special scenarios, user is not sure whether the table of a certain data collection point exists when writing data. In this case, the non-existent table can be created by using automatic table building syntax when writing data. If the table already exists, no new table will be created. For example: +**Automatic table creating** : In some special scenarios, user is not sure whether the table of a certain data collection point exists when writing data. In this case, the non-existent table can be created by using automatic table creating syntax when writing data. If the table already exists, no new table will be created. For example: ```mysql INSERT INTO d1001 USING METERS TAGS ("Beijng.Chaoyang", 2) VALUES (now, 10.2, 219, 0.32); ``` -The SQL statement above inserts records (now, 10.2, 219, 0.32) into table d1001. If table d1001 has not been created yet, the STable meters is used as the template to automatically create it, and the tag value "Beijing.Chaoyang", 2 is marked at the same time. +The SQL statement above inserts records (now, 10.2, 219, 0.32) into table d1001. If table d1001 has not been created yet, the STable meters is used as the template to create it automatically, and the tag value "Beijing.Chaoyang", 2 is set at the same time. For detailed syntax of automatic table building, please refer to the "[Automatic Table Creation When Inserting Records](https://www.taosdata.com/en/documentation/taos-sql#auto_create_table)" section. ## Multi-column Model vs Single-column Model -TDengine supports multi-column model. As long as physical metrics are collected simultaneously by a data collection point (with a consistent timestamp), these metrics can be placed in a STable as different columns. However, there is also an extreme design, a single-column model, in which each collected physical metric is set up separately, so each type of physical metrics is set up separately with a STable. For example, create 3 Stables, one each for current, voltage and phase. +TDengine supports multi-column model. As long as metrics are collected simultaneously by a data collection point (with the same timestamp), these metrics can be placed in a STable as different columns. However, there is also an extreme design, a single-column model, in which a STable is created for each metric. For smart meter example, we need to create 3 Stables, one for current, one for voltage and one for phase. + +TDengine recommends using multi-column model as much as possible because of higher insertion and storage efficiency. However, for some scenarios, types of collected metrics often change. In this case, if multi-column model is adopted, the schema definition of STable needs to be modified frequently and the application becomes complicated. To avoid that, single-column model is recommended. -TDengine recommends using multi-column model as much as possible because of higher insertion and storage efficiency. However, for some scenarios, types of collected metrics often change. In this case, if multi-column model is adopted, the structure definition of STable needs to be frequently modified so make the application complicated. To avoid that, single-column model is recommended. diff --git a/documentation20/en/05.insert/docs.md b/documentation20/en/05.insert/docs.md index 88746ea60867b37e5956075f88c48ebd8276dfaa..b646403b569e732abb224fa7287a69119f6511d3 100644 --- a/documentation20/en/05.insert/docs.md +++ b/documentation20/en/05.insert/docs.md @@ -1,8 +1,8 @@ # Efficient Data Writing -TDengine supports multiple interfaces to write data, including SQL, Prometheus, Telegraf, EMQ MQTT Broker, HiveMQ Broker, CSV file, etc. Kafka, OPC and other interfaces will be provided in the future. Data can be inserted in a single piece or in batches, data from one or multiple data collection points can be inserted at the same time. TDengine supports multi-thread insertion, nonsequential data insertion, and also historical data insertion. +TDengine supports multiple ways to write data, including SQL, Prometheus, Telegraf, EMQ MQTT Broker, HiveMQ Broker, CSV file, etc. Kafka, OPC and other interfaces will be provided in the future. Data can be inserted in one single record or in batches, data from one or multiple data collection points can be inserted at the same time. TDengine supports multi-thread insertion, out-of-order data insertion, and also historical data insertion. -## SQL Writing +## Data Writing via SQL Applications insert data by executing SQL insert statements through C/C++, JDBC, GO, or Python Connector, and users can manually enter SQL insert statements to insert data through TAOS Shell. For example, the following insert writes a record to table d1001: @@ -10,13 +10,13 @@ Applications insert data by executing SQL insert statements through C/C++, JDBC, INSERT INTO d1001 VALUES (1538548685000, 10.3, 219, 0.31); ``` -TDengine supports writing multiple records at a time. For example, the following command writes two records to table d1001: +TDengine supports writing multiple records in a single statement. For example, the following command writes two records to table d1001: ```mysql INSERT INTO d1001 VALUES (1538548684000, 10.2, 220, 0.23) (1538548696650, 10.3, 218, 0.25); ``` -TDengine also supports writing data to multiple tables at a time. For example, the following command writes two records to d1001 and one record to d1002: +TDengine also supports writing data to multiple tables in a single statement. For example, the following command writes two records to d1001 and one record to d1002: ```mysql INSERT INTO d1001 VALUES (1538548685000, 10.3, 219, 0.31) (1538548695000, 12.6, 218, 0.33) d1002 VALUES (1538548696800, 12.3, 221, 0.31); @@ -26,22 +26,22 @@ For the SQL INSERT Grammar, please refer to [Taos SQL insert](https://www.taosd **Tips:** -- To improve writing efficiency, batch writing is required. The more records written in a batch, the higher the insertion efficiency. However, a record cannot exceed 16K, and the total length of an SQL statement cannot exceed 64K (it can be configured by parameter maxSQLLength, and the maximum can be configured to 1M). -- TDengine supports multi-thread parallel writing. To further improve writing speed, a client needs to open more than 20 threads to write parallelly. However, after the number of threads reaches a certain threshold, it cannot be increased or even become decreased, because too much frequent thread switching brings extra overhead. -- For a same table, if the timestamp of a newly inserted record already exists, (no database was created using UPDATE 1) the new record will be discarded as default, that is, the timestamp must be unique in a table. If an application automatically generates records, it is very likely that the generated timestamps will be the same, so the number of records successfully inserted will be smaller than the number of records the application try to insert. If you use UPDATE 1 option when creating a database, inserting a new record with the same timestamp will overwrite the original record. +- To improve writing efficiency, batch writing is required. The more records written in a batch, the higher the insertion efficiency. However, a record size cannot exceed 16K, and the total length of an SQL statement cannot exceed 64K (it can be configured by parameter maxSQLLength, and the maximum can be configured to 1M). +- TDengine supports multi-thread parallel writing. To further improve writing speed, a client needs to open more than 20 threads to write parallelly. However, after the number of threads reaches a certain threshold, it cannot be increased or even become decreased, because too much thread switching brings extra overhead. +- For the same table, if the timestamp of a newly inserted record already exists, the new record will be discarded as default (database option update = 0), that is, the timestamp must be unique in a table. If an application automatically generates records, it is very likely that the generated timestamps will be the same, so the number of records successfully inserted will be smaller than the number of records the application try to insert. If you use UPDATE 1 option when creating a database, inserting a new record with the same timestamp will overwrite the original record. - The timestamp of written data must be greater than the current time minus the time of configuration parameter keep. If keep is configured for 3650 days, data older than 3650 days cannot be written. The timestamp for writing data cannot be greater than the current time plus configuration parameter days. If days is configured to 2, data 2 days later than the current time cannot be written. -## Direct Writing of Prometheus +## Data Writing via Prometheus As a graduate project of Cloud Native Computing Foundation, [Prometheus](https://www.prometheus.io/) is widely used in the field of performance monitoring and K8S performance monitoring. TDengine provides a simple tool [Bailongma](https://github.com/taosdata/Bailongma), which only needs to be simply configured in Prometheus without any code, and can directly write the data collected by Prometheus into TDengine, then automatically create databases and related table entries in TDengine according to rules. Blog post [Use Docker Container to Quickly Build a Devops Monitoring Demo](https://www.taosdata.com/blog/2020/02/03/1189.html), which is an example of using bailongma to write Prometheus and Telegraf data into TDengine. ### Compile blm_prometheus From Source -Users need to download the source code of [Bailongma](https://github.com/taosdata/Bailongma) from github, then compile and generate an executable file using Golang language compiler. Before you start compiling, you need to complete following prepares: +Users need to download the source code of [Bailongma](https://github.com/taosdata/Bailongma) from github, then compile and generate an executable file using Golang language compiler. Before you start compiling, you need to prepare: - A server running Linux OS - Golang version 1.10 and higher installed -- An appropriated TDengine version. Because the client dynamic link library of TDengine is used, it is necessary to install the same version of TDengine as the server-side; for example, if the server version is TDengine 2.0. 0, ensure install the same version on the linux server where bailongma is located (can be on the same server as TDengine, or on a different server) +- Since the client dynamic link library of TDengine is used, it is necessary to install the same version of TDengine as the server-side. For example, if the server version is TDengine 2.0. 0, ensure install the same version on the linux server where bailongma is located (can be on the same server as TDengine, or on a different server) Bailongma project has a folder, blm_prometheus, which holds the prometheus writing API. The compiling process is as follows: @@ -134,7 +134,7 @@ The format of generated data by Prometheus is as follows: } ``` -Where apiserver_request_latencies_bucket is the name of the time-series data collected by prometheus, and the tag of the time-series data is in the following {}. blm_prometheus automatically creates a STable in TDengine with the name of the time series data, and converts the tag in {} into the tag value of TDengine, with Timestamp as the timestamp and value as the value of the time-series data. Therefore, in the client of TDEngine, you can check whether this data was successfully written through the following instruction. +Where apiserver_request_latencies_bucket is the name of the time-series data collected by prometheus, and the tag of the time-series data is in the following {}. blm_prometheus automatically creates a STable in TDengine with the name of the time series data, and converts the tag in {} into the tag value of TDengine, with Timestamp as the timestamp and value as the value of the time-series data. Therefore, in the client of TDengine, you can check whether this data was successfully written through the following instruction. ```mysql use prometheus; @@ -144,7 +144,7 @@ select * from apiserver_request_latencies_bucket; -## Direct Writing of Telegraf +## Data Writing via Telegraf [Telegraf](https://www.influxdata.com/time-series-platform/telegraf/) is a popular open source tool for IT operation data collection. TDengine provides a simple tool [Bailongma](https://github.com/taosdata/Bailongma), which only needs to be simply configured in Telegraf without any code, and can directly write the data collected by Telegraf into TDengine, then automatically create databases and related table entries in TDengine according to rules. Blog post [Use Docker Container to Quickly Build a Devops Monitoring Demo](https://www.taosdata.com/blog/2020/02/03/1189.html), which is an example of using bailongma to write Prometheus and Telegraf data into TDengine. @@ -271,12 +271,12 @@ select * from cpu; MQTT is a popular data transmission protocol in the IoT. TDengine can easily access the data received by MQTT Broker and write it to TDengine. -## Direct Writing of EMQ Broker +## Data Writing via EMQ Broker [EMQ](https://github.com/emqx/emqx) is an open source MQTT Broker software, with no need of coding, only to use "rules" in EMQ Dashboard for simple configuration, and MQTT data can be directly written into TDengine. EMQ X supports storing data to the TDengine by sending it to a Web service, and also provides a native TDengine driver on Enterprise Edition for direct data store. Please refer to [EMQ official documents](https://docs.emqx.io/broker/latest/cn/rule/rule-example.html#%E4%BF%9D%E5%AD%98%E6%95%B0%E6%8D%AE%E5%88%B0-tdengine) for more details. -## Direct Writing of HiveMQ Broker +## Data Writing via HiveMQ Broker -[HiveMQ](https://www.hivemq.com/) is an MQTT agent that provides Free Personal and Enterprise Edition versions. It is mainly used for enterprises, emerging machine-to-machine(M2M) communication and internal transmission to meet scalability, easy management and security features. HiveMQ provides an open source plug-in development kit. You can store data to TDengine via HiveMQ extension-TDengine. Refer to the [HiveMQ extension-TDengine documentation](https://github.com/huskar-t/hivemq-tdengine-extension/blob/b62a26ecc164a310104df57691691b237e091c89/README.md) for more details. +[HiveMQ](https://www.hivemq.com/) is an MQTT agent that provides Free Personal and Enterprise Edition versions. It is mainly used for enterprises, emerging machine-to-machine(M2M) communication and internal transmission to meet scalability, easy management and security features. HiveMQ provides an open source plug-in development kit. You can store data to TDengine via HiveMQ extension-TDengine. Refer to the [HiveMQ extension-TDengine documentation](https://github.com/huskar-t/hivemq-tdengine-extension/blob/b62a26ecc164a310104df57691691b237e091c89/README.md) for more details. \ No newline at end of file diff --git a/documentation20/en/06.queries/docs.md b/documentation20/en/06.queries/docs.md index c4f1359820a28b390e84be93e077fecb1d5ede0e..7688a941f0fb5b685f592833322906e4c4760b79 100644 --- a/documentation20/en/06.queries/docs.md +++ b/documentation20/en/06.queries/docs.md @@ -28,7 +28,7 @@ For specific query syntax, please see the [Data Query section of TAOS SQL](https ## Multi-table Aggregation Query -In an IoT scenario, there are often multiple data collection points in a same type. TDengine uses the concept of STable to describe a certain type of data collection point, and an ordinary table to describe a specific data collection point. At the same time, TDengine uses tags to describe the statical attributes of data collection points. A given data collection point has a specific tag value. By specifying the filters of tags, TDengine provides an efficient method to aggregate and query the sub-tables of STables (data collection points of a certain type). Aggregation functions and most operations on ordinary tables are applicable to STables, and the syntax is exactly the same. +In an IoT scenario, there are often multiple data collection points in a same type. TDengine uses the concept of STable to describe a certain type of data collection point, and an ordinary table to describe a specific data collection point. At the same time, TDengine uses tags to describe the static attributes of data collection points. A given data collection point has a specific tag value. By specifying the filters of tags, TDengine provides an efficient method to aggregate and query the sub-tables of STables (data collection points of a certain type). Aggregation functions and most operations on ordinary tables are applicable to STables, and the syntax is exactly the same. **Example 1**: In TAOS Shell, look up the average voltages collected by all smart meters in Beijing and group them by location @@ -55,7 +55,7 @@ TDengine only allows aggregation queries between tables belonging to a same STab ## Down Sampling Query, Interpolation -In a scenario of IoT, it is often necessary to aggregate the collected data by intervals through down sampling. TDengine provides a simple keyword interval, which makes query operations according to time windows extremely simple. For example, the current values collected by smart meter d1001 are summed every 10 seconds. +In a scenario of IoT, it is often necessary to aggregate the collected data by intervals through down sampling. TDengine provides a simple keyword `interval`, which makes query operations according to time windows extremely simple. For example, the current values collected by smart meter d1001 are summed every 10 seconds. ```mysql taos> SELECT sum(current) FROM d1001 INTERVAL(10s); @@ -94,6 +94,6 @@ taos> SELECT SUM(current) FROM meters INTERVAL(1s, 500a); Query OK, 5 row(s) in set (0.001521s) ``` -In a scenario of IoT, it is difficult to synchronize the time stamp of collected data at each point, but many analysis algorithms (such as FFT) need to align the collected data strictly at equal intervals of time. In many systems, it’s required to write their own programs to process, but the down sampling operation of TDengine can be easily solved. If there is no collected data in an interval, TDengine also provides interpolation calculation function. +In IoT scenario, it is difficult to synchronize the time stamp of collected data at each point, but many analysis algorithms (such as FFT) need to align the collected data strictly at equal intervals of time. In many systems, it’s required to write their own programs to process, but the down sampling operation of TDengine can be used to solve the problem easily. If there is no collected data in an interval, TDengine also provides interpolation calculation function. For details of syntax rules, please refer to the [Time-dimension Aggregation section of TAOS SQL](https://www.taosdata.com/en/documentation/taos-sql#aggregation). \ No newline at end of file diff --git a/documentation20/en/07.advanced-features/docs.md b/documentation20/en/07.advanced-features/docs.md index d9103c70216772a9ce24f67c719b379b106a9055..38c70862b637daf5840606535971e412d938b9e8 100644 --- a/documentation20/en/07.advanced-features/docs.md +++ b/documentation20/en/07.advanced-features/docs.md @@ -9,8 +9,8 @@ Continuous query of TDengine adopts time-driven mode, which can be defined direc The continuous query provided by TDengine differs from the time window calculation in ordinary stream computing in the following ways: - Unlike the real-time feedback calculated results of stream computing, continuous query only starts calculation after the time window is closed. For example, if the time period is 1 day, the results of that day will only be generated after 23:59:59. -- If a history record is written to the time interval that has been calculated, the continuous query will not recalculate and will not push the results to the user again. For the mode of writing back to TDengine, the existing calculated results will not be updated. -- Using the mode of continuous query pushing results, the server does not cache the client's calculation status, nor does it provide Exactly-Once semantic guarantee. If the user's application side crashed, the continuous query pulled up again would only recalculate the latest complete time window from the time pulled up again. If writeback mode is used, TDengine can ensure the validity and continuity of data writeback. +- If a history record is written to the time interval that has been calculated, the continuous query will not re-calculate and will not push the new results to the user again. +- TDengine server does not cache or save the client's status, nor does it provide Exactly-Once semantic guarantee. If the application crashes, the continuous query will be pull up again and starting time must be provided by the application. ### How to use continuous query @@ -29,7 +29,7 @@ We already know that the average voltage of these meters can be counted with one select avg(voltage) from meters interval(1m) sliding(30s); ``` -Every time this statement is executed, all data will be recalculated. If you need to execute every 30 seconds to incrementally calculate the data of the latest minute, you can improve the above statement as following, using a different `startTime` each time and executing it regularly: +Every time this statement is executed, all data will be re-calculated. If you need to execute every 30 seconds to incrementally calculate the data of the latest minute, you can improve the above statement as following, using a different `startTime` each time and executing it regularly: ```sql select avg(voltage) from meters where ts > {startTime} interval(1m) sliding(30s); @@ -65,7 +65,7 @@ It should be noted that now in the above example refers to the time when continu ### Manage the Continuous Query -Users can view all continuous queries running in the system through the show streams command in the console, and can kill the corresponding continuous queries through the kill stream command. Subsequent versions will provide more finer-grained and convenient continuous query management commands. +Users can view all continuous queries running in the system through the `show streams` command in the console, and can kill the corresponding continuous queries through the `kill stream` command. Subsequent versions will provide more finer-grained and convenient continuous query management commands. ## Publisher/Subscriber @@ -101,7 +101,7 @@ Another method is to query the STable. In this way, no matter how many meters th select * from meters where ts > {last_timestamp} and current > 10; ``` -However, how to choose `last_timestamp` has become a new problem. Because, on the one hand, the time of data generation (the data timestamp) and the time of data storage are generally not the same, and sometimes the deviation is still very large; On the other hand, the time when the data of different meters arrive at TDengine will also vary. Therefore, if we use the timestamp of the data from the slowest meter as `last_timestamp` in the query, we may repeatedly read the data of other meters; If the timestamp of the fastest meter is used, the data of other meters may be missed. +However, how to choose `last_timestamp` has become a new problem. Because, on the one hand, the time of data generation (the data timestamp) and the time of data writing are generally not the same, and sometimes the deviation is still very large; On the other hand, the time when the data of different meters arrive at TDengine will also vary. Therefore, if we use the timestamp of the data from the slowest meter as `last_timestamp` in the query, we may repeatedly read the data of other meters; If the timestamp of the fastest meter is used, the data of other meters may be missed. The subscription function of TDengine provides a thorough solution to the above problem. @@ -357,4 +357,4 @@ This SQL statement will obtain the last recorded voltage value of all smart mete In scenarios of TDengine, alarm monitoring is a common requirement. Conceptually, it requires the program to filter out data that meet certain conditions from the data of the latest period of time, and calculate a result according to a defined formula based on these data. When the result meets certain conditions and lasts for a certain period of time, it will notify the user in some form. -In order to meet the needs of users for alarm monitoring, TDengine provides this function in the form of an independent module. For its installation and use, please refer to the blog [How to Use TDengine for Alarm Monitoring](https://www.taosdata.com/blog/2020/04/14/1438.html). +In order to meet the needs of users for alarm monitoring, TDengine provides this function in the form of an independent module. For its installation and use, please refer to the blog [How to Use TDengine for Alarm Monitoring](https://www.taosdata.com/blog/2020/04/14/1438.html). \ No newline at end of file diff --git a/documentation20/en/08.connector/docs.md b/documentation20/en/08.connector/docs.md index e8087b79db0ab82709428d8a9493ac577b2f5971..9cbd3952068d8eac23ffa9bcd7497ff158a21d86 100644 --- a/documentation20/en/08.connector/docs.md +++ b/documentation20/en/08.connector/docs.md @@ -179,7 +179,7 @@ Clean up the running environment and call this API before the application exits. - `int taos_options(TSDB_OPTION option, const void * arg, ...)` -Set client options, currently only time zone setting (`_TSDB_OPTIONTIMEZONE`) and encoding setting (`_TSDB_OPTIONLOCALE`) are supported. The time zone and encoding default to the current operating system settings. +Set client options, currently only time zone setting (_TSDB_OPTIONTIMEZONE) and encoding setting (_TSDB_OPTIONLOCALE) are supported. The time zone and encoding default to the current operating system settings. - `char *taos_get_client_info()` @@ -296,7 +296,9 @@ Asynchronous APIs have relatively high requirements for users, who can selective The asynchronous APIs of TDengine all use non-blocking calling mode. Applications can use multithreading to open multiple tables at the same time, and can query or insert to each open table at the same time. It should be pointed out that the **application client must ensure that the operation on the same table is completely serialized**, that is, when the insertion or query operation on the same table is not completed (when no result returned), the second insertion or query operation cannot be performed. + + ### Parameter binding API In addition to calling `taos_query` directly for queries, TDengine also provides a Prepare API that supports parameter binding. Like MySQL, these APIs currently only support using question mark `?` to represent the parameters to be bound, as follows: @@ -821,12 +823,12 @@ https://www.taosdata.com/blog/2020/11/02/1901.html The TDengine provides the GO driver taosSql. taosSql implements the GO language's built-in interface database/sql/driver. Users can access TDengine in the application by simply importing the package as follows, see https://github.com/taosdata/driver-go/blob/develop/taosSql/driver_test.go for details. -Sample code for using the Go connector can be found in https://github.com/taosdata/TDengine/tree/develop/tests/examples/go . +Sample code for using the Go connector can be found in https://github.com/taosdata/TDengine/tree/develop/tests/examples/go and the [video tutorial](https://www.taosdata.com/blog/2020/11/11/1951.html). ```Go import ( "database/sql" - _ "github.com/taosdata/driver-go/v2/taosSql" + _ "github.com/taosdata/driver-go/taosSql" ) ``` @@ -837,8 +839,6 @@ go env -w GO111MODULE=on go env -w GOPROXY=https://goproxy.io,direct ``` -`taosSql` v2 completed refactoring of the v1 version and separated the built-in database operation interface `database/sql/driver` to the directory `taosSql`, and put other advanced functions such as subscription and stmt into the directory `af`. - ### Common APIs - `sql.Open(DRIVER_NAME string, dataSourceName string) *DB` @@ -937,7 +937,7 @@ After installing the TDengine client, the nodejsChecker.js program can verify wh Steps: -1. Create a new installation verification directory, for example: `~/tdengine-test`, copy the nodejsChecker.js source program on github. Download address: （https://github.com/taosdata/TDengine/tree/develop/tests/examples/nodejs/nodejsChecker.js）. +1. Create a new installation verification directory, for example: ~/tdengine-test, copy the nodejsChecker.js source program on github. Download address: （https://github.com/taosdata/TDengine/tree/develop/tests/examples/nodejs/nodejsChecker.js）. 2. Execute the following command: diff --git a/documentation20/en/09.connections/docs.md b/documentation20/en/09.connections/docs.md index b693d228cff808661caa4cc22afdc2721709bdc2..19544af0fa50af258f975532ad8399fcb8588b42 100644 --- a/documentation20/en/09.connections/docs.md +++ b/documentation20/en/09.connections/docs.md @@ -2,7 +2,7 @@ ## Grafana -TDengine can quickly integrate with [Grafana](https://www.grafana.com/), an open source data visualization system, to build a data monitoring and alarming system. The whole process does not require any code to write. The contents of the data table in TDengine can be visually showed on DashBoard. +TDengine can be quickly integrated with [Grafana](https://www.grafana.com/), an open source data visualization system, to build a data monitoring and alarming system. The whole process does not require any code to write. The contents of the data table in TDengine can be visually showed on DashBoard. ### Install Grafana diff --git a/documentation20/en/10.cluster/docs.md b/documentation20/en/10.cluster/docs.md index 05d0a463aa1bcf5bf56e9ca4032be9ddbaa59b4d..c0623f43f7956ad4ccc2351aeb09fbec27bda242 100644 --- a/documentation20/en/10.cluster/docs.md +++ b/documentation20/en/10.cluster/docs.md @@ -1,8 +1,8 @@ # TDengine Cluster Management -Multiple TDengine servers, that is, multiple running instances of taosd, can form a cluster to ensure the highly reliable operation of TDengine and provide scale-out features. To understand cluster management in TDengine 2.0, it is necessary to understand the basic concepts of clustering. Please refer to the chapter "Overall Architecture of TDengine 2.0". And before installing the cluster, please follow the chapter ["Getting started"](https://www.taosdata.com/en/documentation/getting-started/) to install and experience the single node function. +Multiple TDengine servers, that is, multiple running instances of taosd, can form a cluster to ensure the highly reliable operation of TDengine and provide scale-out features. To understand cluster management in TDengine 2.0, it is necessary to understand the basic concepts of clustering. Please refer to the chapter "Overall Architecture of TDengine 2.0". And before installing the cluster, please follow the chapter ["Getting started"](https://www.taosdata.com/en/documentation/getting-started/) to install and experience the single node TDengine. -Each data node of the cluster is uniquely identified by End Point, which is composed of FQDN (Fully Qualified Domain Name) plus Port, such as [h1.taosdata.com](http://h1.taosdata.com/):6030. The general FQDN is the hostname of the server, which can be obtained through the Linux command `hostname -f` (how to configure FQDN, please refer to: [All about FQDN of TDengine](https://www.taosdata.com/blog/2020/09/11/1824.html)). Port is the external service port number of this data node. The default is 6030, but it can be modified by configuring the parameter serverPort in taos.cfg. A physical node may be configured with multiple hostnames, and TDengine will automatically get the first one, but it can also be specified through the configuration parameter fqdn in taos.cfg. If you are accustomed to direct IP address access, you can set the parameter fqdn to the IP address of this node. +Each data node of the cluster is uniquely identified by End Point, which is composed of FQDN (Fully Qualified Domain Name) plus Port, such as [h1.taosdata.com](http://h1.taosdata.com/):6030. The general FQDN is the hostname of the server, which can be obtained through the Linux command `hostname -f` (how to configure FQDN, please refer to: [All about FQDN of TDengine](https://www.taosdata.com/blog/2020/09/11/1824.html)). Port is the external service port number of this data node. The default is 6030, but it can be modified by configuring the parameter serverPort in taos.cfg. A physical node may be configured with multiple hostnames, and TDengine will automatically get the first one, but it can also be specified through the configuration parameter `fqdn` in taos.cfg. If you want to access via direct IP address, you can set the parameter `fqdn` to the IP address of this node. The cluster management of TDengine is extremely simple. Except for manual intervention in adding and deleting nodes, all other tasks are completed automatically, thus minimizing the workload of operation. This chapter describes the operations of cluster management in detail. @@ -12,11 +12,11 @@ Please refer to the [video tutorial](https://www.taosdata.com/blog/2020/11/11/19 **Step 0:** Plan FQDN of all physical nodes in the cluster, and add the planned FQDN to /etc/hostname of each physical node respectively; modify the /etc/hosts of each physical node, and add the corresponding IP and FQDN of all cluster physical nodes. [If DNS is deployed, contact your network administrator to configure it on DNS] -**Step 1:** If the physical nodes have previous test data, installed with version 1. x, or installed with other versions of TDengine, please delete it first and drop all data. For specific steps, please refer to the blog "[Installation and Uninstallation of Various Packages of TDengine](https://www.taosdata.com/blog/2019/08/09/566.html)" +**Step 1:** If the physical nodes have previous test data, installed with version 1. x, or installed with other versions of TDengine, please backup all data, then delete it and drop all data. For specific steps, please refer to the blog "[Installation and Uninstallation of Various Packages of TDengine](https://www.taosdata.com/blog/2019/08/09/566.html)" **Note 1:** Because the information of FQDN will be written into a file, if FQDN has not been configured or changed before, and TDengine has been started, be sure to clean up the previous data （`rm -rf /var/lib/taos/*`）on the premise of ensuring that the data is useless or backed up; -**Note 2:** The client also needs to be configured to ensure that it can correctly parse the FQDN configuration of each node, whether through DNS service or modify hosts file. +**Note 2:** The client also needs to be configured to ensure that it can correctly parse the FQDN configuration of each node, whether through DNS service or Host file. **Step 2:** It is recommended to close the firewall of all physical nodes, and at least ensure that the TCP and UDP ports of ports 6030-6042 are open. It is **strongly recommended** to close the firewall first and configure the ports after the cluster is built; @@ -136,7 +136,7 @@ Execute the CLI program taos, log in to the TDengine system using the root accou DROP DNODE "fqdn:port"; ``` -Where fqdn is the FQDN of the deleted node, and port is the port number of its external server. +Where fqdn is the FQDN of the deleted node, and port is the port number. **【Note】** @@ -185,7 +185,7 @@ Because of the introduction of vnode, it is impossible to simply draw a conclusi TDengine cluster is managed by mnode (a module of taosd, management node). In order to ensure the high-availability of mnode, multiple mnode replicas can be configured. The number of replicas is determined by system configuration parameter numOfMnodes, and the effective range is 1-3. In order to ensure the strong consistency of metadata, mnode replicas are duplicated synchronously. -A cluster has multiple data node dnodes, but a dnode runs at most one mnode instance. In the case of multiple dnodes, which dnode can be used as an mnode? This is automatically specified by the system according to the resource situation on the whole. User can execute the following command in the console of TDengine through the CLI program taos: +A cluster has multiple data node dnodes, but a dnode runs at most one mnode instance. In the case of multiple dnodes, which dnode can be used as an mnode? This is automatically selected by the system based on the resource on the whole. User can execute the following command in the console of TDengine through the CLI program taos: ``` SHOW MNODES; @@ -213,7 +213,7 @@ When the above three situations occur, the system will start a load computing of If a data node is offline, the TDengine cluster will automatically detect it. There are two detailed situations: -- If the data node is offline for more than a certain period of time (configuration parameter offlineThreshold in taos.cfg controls the duration), the system will automatically delete the data node, generate system alarm information and trigger the load balancing process. If the deleted data node is online again, it will not be able to join the cluster, and the system administrator will need to add it to the cluster again. +- If the data node is offline for more than a certain period of time (configuration parameter `offlineThreshold` in taos.cfg controls the duration), the system will automatically delete the data node, generate system alarm information and trigger the load balancing process. If the deleted data node is online again, it will not be able to join the cluster, and the system administrator will need to add it to the cluster again. - After offline, the system will automatically start the data recovery process if it goes online again within the duration of offlineThreshold. After the data is fully recovered, the node will start to work normally. **Note:** If each data node belonging to a virtual node group (including mnode group) is in offline or unsynced state, Master can only be elected after all data nodes in the virtual node group are online and can exchange status information, and the virtual node group can serve externally. For example, the whole cluster has 3 data nodes with 3 replicas. If all 3 data nodes go down and then 2 data nodes restart, it will not work. Only when all 3 data nodes restart successfully can serve externally again. @@ -229,7 +229,7 @@ The name of the executable for Arbitrator is tarbitrator. The executable has alm 1. Click [Package Download](https://www.taosdata.com/cn/all-downloads/), and in the TDengine Arbitrator Linux section, select the appropriate version to download and install. -2. The command line parameter -p of this application can specify the port number of its external service, and the default is 6042. +2. The command line parameter -p of this application can specify the port number of its service, and the default is 6042. 3. Modify the configuration file of each taosd instance, and set parameter arbitrator to the End Point corresponding to the tarbitrator in taos.cfg. (If this parameter is configured, when the number of replicas is even, the system will automatically connect the configured Arbitrator. If the number of replicas is odd, even if the Arbitrator is configured, the system will not establish a connection.) 4. The Arbitrator configured in the configuration file will appear in the return result of instruction `SHOW DNODES`; the value of the corresponding role column will be "arb". diff --git a/documentation20/en/11.administrator/docs.md b/documentation20/en/11.administrator/docs.md index 3817a41766d515d663661fd4382c883e0d8f179b..5dc1f9c7a9d286a997dd1b87ea8987c7b6cec5cf 100644 --- a/documentation20/en/11.administrator/docs.md +++ b/documentation20/en/11.administrator/docs.md @@ -22,8 +22,8 @@ If there is plenty of memory, the configuration of Blocks can be increased so th CPU requirements depend on the following two aspects: -- **Data insertion** TDengine single core can handle at least 10,000 insertion requests per second. Each insertion request can take multiple records, and inserting one record at a time is almost the same as inserting 10 records in computing resources consuming. Therefore, the larger the number of inserts, the higher the insertion efficiency. If an insert request has more than 200 records, a single core can insert 1 million records per second. However, the faster the insertion speed, the higher the requirement for front-end data collection, because records need to be cached and then inserted in batches. -- **Query requirements** TDengine to provide efficient queries, but the queries in each scenario vary greatly and the query frequency too, making it difficult to give objective figures. Users need to write some query statements for their own scenes to determine. +- **Data insertion**: TDengine single core can handle at least 10,000 insertion requests per second. Each insertion request can take multiple records, and inserting one record at a time is almost the same as inserting 10 records in computing resources consuming. Therefore, the larger the number of records per insert, the higher the insertion efficiency. If an insert request has more than 200 records, a single core can insert 1 million records per second. However, the faster the insertion speed, the higher the requirement for front-end data collection, because records need to be cached and then inserted in batches. +- **Query**: TDengine provides efficient queries, but the queries in each scenario vary greatly and the query frequency too, making it difficult to give objective figures. Users need to write some query statements for their own scenes to estimate. Therefore, only for data insertion, CPU can be estimated, but the computing resources consumed by query cannot be that clear. In the actual operation, it is not recommended to make CPU utilization rate over 50%. After that, new nodes need to be added to bring more computing resources. @@ -78,7 +78,7 @@ When the nodes in TDengine cluster are deployed on different physical machines a ## Server-side Configuration -The background service of TDengine system is provided by taosd, and the configuration parameters can be modified in the configuration file taos.cfg to meet the requirements of different scenarios. The default location of the configuration file is the /etc/taos directory, which can be specified by executing the parameter -c from the taosd command line. Such as taosd-c/home/user, to specify that the configuration file is located in the /home/user directory. +The background service of TDengine system is provided by taosd, and the configuration parameters can be modified in the configuration file taos.cfg to meet the requirements of different scenarios. The default location of the configuration file is the /etc/taos directory, which can be specified by executing the parameter `-c` from the taosd command line. Such as `taosd -c /home/user,` to specify that the configuration file is located in the /home/user directory. You can also use “-C” to show the current server configuration parameters: @@ -88,14 +88,14 @@ taosd -C Only some important configuration parameters are listed below. For more parameters, please refer to the instructions in the configuration file. Please refer to the previous chapters for detailed introduction and function of each parameter, and the default of these parameters is working and generally does not need to be set. **Note: After the configuration is modified, \*taosd service\* needs to be restarted to take effect.** -- firstEp: end point of the first dnode in the actively connected cluster when taosd starts, the default value is localhost: 6030. -- fqdn: FQDN of the data node, which defaults to the first hostname configured by the operating system. If you are accustomed to IP address access, you can set it to the IP address of the node. +- firstEp: end point of the first dnode which will be connected in the cluster when taosd starts, the default value is localhost: 6030. +- fqdn: FQDN of the data node, which defaults to the first hostname configured by the operating system. If you want to access via IP address directly, you can set it to the IP address of the node. - serverPort: the port number of the external service after taosd started, the default value is 6030. - httpPort: the port number used by the RESTful service to which all HTTP requests (TCP) require a query/write request. The default value is 6041. - dataDir: the data file directory to which all data files will be written. [Default:/var/lib/taos](http://default/var/lib/taos). - logDir: the log file directory to which the running log files of the client and server will be written. [Default:/var/log/taos](http://default/var/log/taos). -- arbitrator: the end point of the arbiter in the system; the default value is null. -- role: optional role for dnode. 0-any; it can be used as an mnode and to allocate vnodes; 1-mgmt; It can only be an mnode, but not to allocate vnodes; 2-dnode; caannot be an mnode, only vnode can be allocated +- arbitrator: the end point of the arbitrator in the system; the default value is null. +- role: optional role for dnode. 0-any; it can be used as an mnode and to allocate vnodes; 1-mgmt; It can only be an mnode, but not to allocate vnodes; 2-dnode; cannot be an mnode, only vnode can be allocated - debugFlage: run the log switch. 131 (output error and warning logs), 135 (output error, warning, and debug logs), 143 (output error, warning, debug, and trace logs). Default value: 131 or 135 (different modules have different default values). - numOfLogLines: the maximum number of lines allowed for a single log file. Default: 10,000,000 lines. - logKeepDays: the maximum retention time of the log file. When it is greater than 0, the log file will be renamed to taosdlog.xxx, where xxx is the timestamp of the last modification of the log file in seconds. Default: 0 days. @@ -161,18 +161,18 @@ For example: ## Client Configuration -The foreground interactive client application of TDengine system is taos and application driver, which shares the same configuration file taos.cfg with taosd. When running taos, use the parameter -c to specify the configuration file directory, such as taos-c/home/cfg, which means using the parameters in the taos.cfg configuration file under the /home/cfg/ directory. The default directory is /etc/taos. For more information on how to use taos, see the help information taos --help. This section mainly describes the parameters used by the taos client application in the configuration file taos.cfg. +The foreground interactive client application of TDengine system is taos and application driver, which shares the same configuration file taos.cfg with taosd. When running taos, use the parameter `-c` to specify the configuration file directory, such as `taos -c /home/cfg`, which means using the parameters in the taos.cfg configuration file under the /home/cfg/ directory. The default directory is /etc/taos. For more information on how to use taos, see the help information `taos --help`. This section mainly describes the parameters used by the taos client application in the configuration file taos.cfg. **Versions after 2.0. 10.0 support the following parameters on command line to display the current client configuration parameters** ```bash -taos -C 或 taos --dump-config +taos -C or taos --dump-config ``` Client configuration parameters: - firstEp: end point of the first taosd instance in the actively connected cluster when taos is started, the default value is localhost: 6030. -- secondEp: when taos starts, if not impossible to connect to firstEp, it will try to connect to secondEp. +- secondEp: when taos starts, if unable to connect to firstEp, it will try to connect to secondEp. - locale Default value: obtained dynamically from the system. If the automatic acquisition fails, user needs to set it in the configuration file or through API @@ -493,4 +493,4 @@ At the moment, TDengine has nearly 200 internal reserved keywords, which cannot | CONCAT | GLOB | METRICS | SET | VIEW | | CONFIGS | GRANTS | MIN | SHOW | WAVG | | CONFLICT | GROUP | MINUS | SLASH | WHERE | -| CONNECTION | | | | | +| CONNECTION | | | | | \ No newline at end of file diff --git a/documentation20/en/12.taos-sql/docs.md b/documentation20/en/12.taos-sql/docs.md index dfa1742c999adbf4a3e7846955dc8a564339d0c2..680a3854b6acf944f2b68dad0fff7ccb483c853a 100644 --- a/documentation20/en/12.taos-sql/docs.md +++ b/documentation20/en/12.taos-sql/docs.md @@ -1,8 +1,8 @@ # TAOS SQL -TDengine provides a SQL-style language, TAOS SQL, to insert or query data, and support other common tips. To finish this document, you should have some understanding about SQL. +TDengine provides a SQL-style language, TAOS SQL, to insert or query data. To read through this document, you should have some basic understanding about SQL. -TAOS SQL is the main tool for users to write and query data to TDengine. TAOS SQL provides a style and mode similar to standard SQL to facilitate users to get started quickly. Strictly speaking, TAOS SQL is not and does not attempt to provide SQL standard syntax. In addition, since TDengine does not provide deletion function for temporal structured data, the relevant function of data deletion is non-existent in TAO SQL. +TAOS SQL is the main way for users to write and query data to TDengine. TAOS SQL is similar to standard SQL to facilitate users to get started quickly. Strictly speaking, TAOS SQL is not and does not attempt to provide SQL standard syntax. In addition, since TDengine does not provide deletion function for time-series data, the relevant function of data deletion is non-existent in TAO SQL. Let’s take a look at the conventions used for syntax descriptions. @@ -127,7 +127,7 @@ Note: ALTER DATABASE db_name CACHELAST 0; ``` CACHELAST parameter controls whether last_row of the data subtable is cached in memory. The default value is 0, and the value range is [0, 1]. Where 0 means not enabled and 1 means enabled. (supported from version 2.0. 11) - + **Tips**: After all the above parameters are modified, show databases can be used to confirm whether the modification is successful. - **Show all databases in system** @@ -138,14 +138,17 @@ Note: ## Table Management -- Create a table -Note: +- **Create a table** -1. The first field must be a timestamp, and system will set it as the primary key; -2. The max length of table name is 192; -3. The length of each row of the table cannot exceed 16k characters; -4. Sub-table names can only consist of letters, numbers, and underscores, and cannot begin with numbers -5. If the data type binary or nchar is used, the maximum number of bytes should be specified, such as binary (20), which means 20 bytes; + ```mysql + CREATE TABLE [IF NOT EXISTS] tb_name (timestamp_field_name TIMESTAMP, field1_name data_type1 [, field2_name data_type2 ...]); + ``` + Note: + 1. The first field must be a timestamp, and system will set it as the primary key; + 2. The max length of table name is 192; + 3. The length of each row of the table cannot exceed 16k characters; + 4. Sub-table names can only consist of letters, numbers, and underscores, and cannot begin with numbers + 5. If the data type binary or nchar is used, the maximum number of bytes should be specified, such as binary (20), which means 20 bytes; - **Create a table via STable** @@ -171,10 +174,10 @@ Note: Note: 1. The method of batch creating tables requires that the data table must use STable as a template. - 2. On the premise of not exceeding the length limit of SQL statements, it is suggested that the number of tables in a single statement should be controlled between 1000 and 3000, which will obtain an ideal speed of table building. + 2. On the premise of not exceeding the length limit of SQL statements, it is suggested that the number of tables in a single statement should be controlled between 1000 and 3000, which will obtain an ideal speed of table creating. - **Drop a table** - + ```mysql DROP TABLE [IF EXISTS] tb_name; ``` @@ -218,7 +221,7 @@ Note: ## STable Management -Note: In 2.0. 15.0 and later versions, STABLE reserved words are supported. That is, in the instruction description later in this section, the three instructions of CREATE, DROP and ALTER need to write TABLE instead of STABLE in the old version as the reserved word. +Note: In 2.0.15.0 and later versions, STABLE reserved words are supported. That is, in the instruction description later in this section, the three instructions of CREATE, DROP and ALTER need to write TABLE instead of STABLE in the old version as the reserved word. - **Create a STable** @@ -290,7 +293,7 @@ Note: In 2.0. 15.0 and later versions, STABLE reserved words are supported. That Modify a tag name of STable. After modifying, all sub-tables under the STable will automatically update the new tag name. - **Modify a tag value of sub-table** - + ```mysql ALTER TABLE tb_name SET TAG tag_name=new_tag_value; ``` @@ -306,7 +309,7 @@ Note: In 2.0. 15.0 and later versions, STABLE reserved words are supported. That Insert a record into table tb_name. - **Insert a record with data corresponding to a given column** - + ```mysql INSERT INTO tb_name (field1_name, ...) VALUES (field1_value1, ...); ``` @@ -320,14 +323,14 @@ Note: In 2.0. 15.0 and later versions, STABLE reserved words are supported. That Insert multiple records into table tb_name. - **Insert multiple records into a given column** - + ```mysql INSERT INTO tb_name (field1_name, ...) VALUES (field1_value1, ...) (field1_value2, ...) ...; ``` Insert multiple records into a given column of table tb_name. - **Insert multiple records into multiple tables** - + ```mysql INSERT INTO tb1_name VALUES (field1_value1, ...) (field1_value2, ...) ... tb2_name VALUES (field1_value1, ...) (field1_value2, ...) ...; @@ -421,7 +424,7 @@ taos> SELECT * FROM d1001; Query OK, 3 row(s) in set (0.001165s) ``` -For Stables, wildcards contain *tag columns*. +For STables, wildcards contain *tag columns*. ```mysql taos> SELECT * FROM meters; @@ -720,7 +723,7 @@ TDengine supports aggregations over data, they are listed below: ================================================ 9 | 9 | Query OK, 1 row(s) in set (0.004475s) - + taos> SELECT COUNT(*), COUNT(voltage) FROM d1001; count(*) | count(voltage) | ================================================ @@ -758,7 +761,7 @@ TDengine supports aggregations over data, they are listed below: ``` - **TWA** - + ```mysql SELECT TWA(field_name) FROM tb_name WHERE clause; ``` @@ -799,7 +802,7 @@ TDengine supports aggregations over data, they are listed below: ================================================================================ 35.200000763 | 658 | 0.950000018 | Query OK, 1 row(s) in set (0.000980s) - ``` + ``` - **STDDEV** @@ -896,7 +899,7 @@ TDengine supports aggregations over data, they are listed below: ====================================== 13.40000 | 223 | Query OK, 1 row(s) in set (0.001123s) - + taos> SELECT MAX(current), MAX(voltage) FROM d1001; max(current) | max(voltage) | ====================================== @@ -937,8 +940,6 @@ TDengine supports aggregations over data, they are listed below: Query OK, 1 row(s) in set (0.001023s) ``` -- - - **LAST** ```mysql @@ -972,7 +973,7 @@ TDengine supports aggregations over data, they are listed below: ``` - **TOP** - + ```mysql SELECT TOP(field_name, K) FROM { tb_name | stb_name } [WHERE clause]; ``` @@ -1029,7 +1030,7 @@ TDengine supports aggregations over data, they are listed below: 2018-10-03 14:38:15.000 | 218 | 2018-10-03 14:38:16.650 | 218 | Query OK, 2 row(s) in set (0.001332s) - + taos> SELECT BOTTOM(current, 2) FROM d1001; ts | bottom(current, 2) | ================================================= @@ -1092,7 +1093,7 @@ TDengine supports aggregations over data, they are listed below: ======================= 12.30000 | Query OK, 1 row(s) in set (0.001238s) - + taos> SELECT LAST_ROW(current) FROM d1002; last_row(current) | ======================= @@ -1146,7 +1147,7 @@ TDengine supports aggregations over data, they are listed below: ============================ 5.000000000 | Query OK, 1 row(s) in set (0.001792s) - + taos> SELECT SPREAD(voltage) FROM d1001; spread(voltage) | ============================ @@ -1172,7 +1173,7 @@ TDengine supports aggregations over data, they are listed below: ## Time-dimension Aggregation -TDengine supports aggregating by intervals. Data in a table can partitioned by intervals and aggregated to generate results. For example, a temperature sensor collects data once per second, but the average temperature needs to be queried every 10 minutes. This aggregation is suitable for down sample operation, and the syntax is as follows: +TDengine supports aggregating by intervals(time range). Data in a table can partitioned by intervals and aggregated to generate results. For example, a temperature sensor collects data once per second, but the average temperature needs to be queried every 10 minutes. This aggregation is suitable for down sample operation, and the syntax is as follows: ```mysql SELECT function_list FROM tb_name @@ -1235,12 +1236,12 @@ SELECT AVG(current), MAX(current), LEASTSQUARES(current, start_val, step_val), P **Restrictions on group by** -TAOS SQL supports group by operation on tags, tbnames and ordinary columns, required that only one column and whichhas less than 100,000 unique values. +TAOS SQL supports group by operation on tags, tbnames and ordinary columns, required that only one column and which has less than 100,000 unique values. **Restrictions on join operation** -TAOS SQL supports join columns of two tables by Primary Key timestamp between them, and does not support four operations after tables aggregated for the time being. +TAOS SQL supports join columns of two tables by Primary Key timestamp between them, and does not support four arithmetic operations after tables aggregated for the time being. **Availability of is no null** -Is not null supports all types of columns. Non-null expression is < > "" and only applies to columns of non-numeric types. +Is not null supports all types of columns. Non-null expression is < > "" and only applies to columns of non-numeric types. \ No newline at end of file