diff --git a/docs/en/13-operation/01-pkg-install.md b/docs/en/13-operation/01-pkg-install.md index c098002962d62aa0acc7a94462c052303cb2ed90..30060fb085aa15d2217650f8468bf984bc3ca836 100644 --- a/docs/en/13-operation/01-pkg-install.md +++ b/docs/en/13-operation/01-pkg-install.md @@ -1,152 +1,63 @@ --- -title: Install & Uninstall +title: Install and Uninstall description: Install, Uninstall, Start, Stop and Upgrade --- import Tabs from "@theme/Tabs"; import TabItem from "@theme/TabItem"; -TDengine community version provides deb and rpm packages for users to choose from, based on their system environment. The deb package supports Debian, Ubuntu and derivative systems. The rpm package supports CentOS, RHEL, SUSE and derivative systems. Furthermore, a tar.gz package is provided for TDengine Enterprise customers. +This document gives more information about installing, uninstalling, and upgrading TDengine. ## Install - - - -1. Download deb package from official website, for example TDengine-server-2.4.0.7-Linux-x64.deb -2. In the directory where the package is located, execute the command below - -```bash -$ sudo dpkg -i TDengine-server-2.4.0.7-Linux-x64.deb -(Reading database ... 137504 files and directories currently installed.) -Preparing to unpack TDengine-server-2.4.0.7-Linux-x64.deb ... -TDengine is removed successfully! -Unpacking tdengine (2.4.0.7) over (2.4.0.7) ... -Setting up tdengine (2.4.0.7) ... -Start to install TDengine... - -System hostname is: ubuntu-1804 - -Enter FQDN:port (like h1.taosdata.com:6030) of an existing TDengine cluster node to join -OR leave it blank to build one: - -Enter your email address for priority support or enter empty to skip: -Created symlink /etc/systemd/system/multi-user.target.wants/taosd.service → /etc/systemd/system/taosd.service. - -To configure TDengine : edit /etc/taos/taos.cfg -To start TDengine : sudo systemctl start taosd -To access TDengine : taos -h ubuntu-1804 to login into TDengine server - - -TDengine is installed successfully! -``` - - - - +See [Quick Install](../../get-started/package) for preliminary steps. -1. Download rpm package from official website, for example TDengine-server-2.4.0.7-Linux-x64.rpm； -2. In the directory where the package is located, execute the command below -``` -$ sudo rpm -ivh TDengine-server-2.4.0.7-Linux-x64.rpm -Preparing... ################################# [100%] -Updating / installing... - 1:tdengine-2.4.0.7-3 ################################# [100%] -Start to install TDengine... - -System hostname is: centos7 - -Enter FQDN:port (like h1.taosdata.com:6030) of an existing TDengine cluster node to join -OR leave it blank to build one: - -Enter your email address for priority support or enter empty to skip: -Created symlink from /etc/systemd/system/multi-user.target.wants/taosd.service to /etc/systemd/system/taosd.service. - -To configure TDengine : edit /etc/taos/taos.cfg -To start TDengine : sudo systemctl start taosd -To access TDengine : taos -h centos7 to login into TDengine server +## Installation Directory +TDengine is installed at /usr/local/taos if successful. -TDengine is installed successfully! ``` - - - - - -1. Download the tar.gz package, for example TDengine-server-2.4.0.7-Linux-x64.tar.gz； -2. In the directory where the package is located, first decompress the file, then switch to the sub-directory generated in decompressing, i.e. "TDengine-enterprise-server-2.4.0.7/" in this example, and execute the `install.sh` script. - -```bash -$ tar xvzf TDengine-enterprise-server-2.4.0.7-Linux-x64.tar.gz -TDengine-enterprise-server-2.4.0.7/ -TDengine-enterprise-server-2.4.0.7/driver/ -TDengine-enterprise-server-2.4.0.7/driver/vercomp.txt -TDengine-enterprise-server-2.4.0.7/driver/libtaos.so.2.4.0.7 -TDengine-enterprise-server-2.4.0.7/install.sh -TDengine-enterprise-server-2.4.0.7/examples/ -... - +$ cd /usr/local/taos $ ll -total 43816 -drwxrwxr-x 3 ubuntu ubuntu 4096 Feb 22 09:31 ./ -drwxr-xr-x 20 ubuntu ubuntu 4096 Feb 22 09:30 ../ -drwxrwxr-x 4 ubuntu ubuntu 4096 Feb 22 09:30 TDengine-enterprise-server-2.4.0.7/ --rw-rw-r-- 1 ubuntu ubuntu 44852544 Feb 22 09:31 TDengine-enterprise-server-2.4.0.7-Linux-x64.tar.gz - -$ cd TDengine-enterprise-server-2.4.0.7/ - - $ ll -total 40784 -drwxrwxr-x 4 ubuntu ubuntu 4096 Feb 22 09:30 ./ -drwxrwxr-x 3 ubuntu ubuntu 4096 Feb 22 09:31 ../ -drwxrwxr-x 2 ubuntu ubuntu 4096 Feb 22 09:30 driver/ -drwxrwxr-x 10 ubuntu ubuntu 4096 Feb 22 09:30 examples/ --rwxrwxr-x 1 ubuntu ubuntu 33294 Feb 22 09:30 install.sh* --rw-rw-r-- 1 ubuntu ubuntu 41704288 Feb 22 09:30 taos.tar.gz - -$ sudo ./install.sh - -Start to update TDengine... -Created symlink /etc/systemd/system/multi-user.target.wants/taosd.service → /etc/systemd/system/taosd.service. -Nginx for TDengine is updated successfully! - -To configure TDengine : edit /etc/taos/taos.cfg -To configure Taos Adapter (if has) : edit /etc/taos/taosadapter.toml -To start TDengine : sudo systemctl start taosd -To access TDengine : use taos -h ubuntu-1804 in shell OR from http://127.0.0.1:6060 - -TDengine is updated successfully! -Install taoskeeper as a standalone service -taoskeeper is installed, enable it by `systemctl enable taoskeeper` +$ ll +total 28 +drwxr-xr-x 7 root root 4096 Feb 22 09:34 ./ +drwxr-xr-x 12 root root 4096 Feb 22 09:34 ../ +drwxr-xr-x 2 root root 4096 Feb 22 09:34 bin/ +drwxr-xr-x 2 root root 4096 Feb 22 09:34 cfg/ +lrwxrwxrwx 1 root root 13 Feb 22 09:34 data -> /var/lib/taos/ +drwxr-xr-x 2 root root 4096 Feb 22 09:34 driver/ +drwxr-xr-x 10 root root 4096 Feb 22 09:34 examples/ +drwxr-xr-x 2 root root 4096 Feb 22 09:34 include/ +lrwxrwxrwx 1 root root 13 Feb 22 09:34 log -> /var/log/taos/ ``` -:::info -Users will be prompted to enter some configuration information when install.sh is executing. The interactive mode can be disabled by executing `./install.sh -e no`. `./install.sh -h` can show all parameters with detailed explanation. - -::: - - - - -:::note -When installing on the first node in the cluster, at the "Enter FQDN:" prompt, nothing needs to be provided. When installing on subsequent nodes, at the "Enter FQDN:" prompt, you must enter the end point of the first dnode in the cluster if it is already up. You can also just ignore it and configure it later after installation is finished. - -::: +- Configuration directory, data directory, and log directory are created automatically if they don't exist +- The default configuration file is located at /etc/taos/taos.cfg, which is a copy of /usr/local/taos/cfg/taos.cfg +- The default data directory is /var/lib/taos, which is a soft link to /usr/local/taos/data +- The default log directory is /var/log/taos, which is a soft link to /usr/local/taos/log +- The executables at /usr/local/taos/bin are linked to /usr/bin +- The DLL files at /usr/local/taos/driver are linked to /usr/lib +- The header files at /usr/local/taos/include are linked to /usr/include ## Uninstall + + +TBD + + Deb package of TDengine can be uninstalled as below: -```bash +``` $ sudo dpkg -r tdengine -(Reading database ... 137504 files and directories currently installed.) -Removing tdengine (2.4.0.7) ... +(Reading database ... 120119 files and directories currently installed.) +Removing tdengine (3.0.0.10002) ... TDengine is removed successfully! ``` @@ -170,115 +81,59 @@ tar.gz package of TDengine can be uninstalled as below: ``` $ rmtaos -Nginx for TDengine is running, stopping it... TDengine is removed successfully! - -taosKeeper is removed successfully! ``` + + +Run C:\TDengine\unins000.exe to uninstall TDengine on a Windows system. -:::note - -- We strongly recommend not to use multiple kinds of installation packages on a single host TDengine. -- After deb package is installed, if the installation directory is removed manually, uninstall or reinstall will not work. This issue can be resolved by using the command below which cleans up TDengine package information. You can then reinstall if needed. - -```bash - $ sudo rm -f /var/lib/dpkg/info/tdengine* -``` +:::info -- After rpm package is installed, if the installation directory is removed manually, uninstall or reinstall will not work. This issue can be resolved by using the command below which cleans up TDengine package information. You can then reinstall if needed. +- We strongly recommend not to use multiple kinds of installation packages on a single host TDengine. The packages may affect each other and cause errors. -```bash - $ sudo rpm -e --noscripts tdengine -``` +- After deb package is installed, if the installation directory is removed manually, uninstall or reinstall will not work. This issue can be resolved by using the command below which cleans up TDengine package information. -::: + ``` + $ sudo rm -f /var/lib/dpkg/info/tdengine* + ``` -## Installation Directory +You can then reinstall if needed. -TDengine is installed at /usr/local/taos if successful. +- After rpm package is installed, if the installation directory is removed manually, uninstall or reinstall will not work. This issue can be resolved by using the command below which cleans up TDengine package information. -```bash -$ cd /usr/local/taos -$ ll -$ ll -total 28 -drwxr-xr-x 7 root root 4096 Feb 22 09:34 ./ -drwxr-xr-x 12 root root 4096 Feb 22 09:34 ../ -drwxr-xr-x 2 root root 4096 Feb 22 09:34 bin/ -drwxr-xr-x 2 root root 4096 Feb 22 09:34 cfg/ -lrwxrwxrwx 1 root root 13 Feb 22 09:34 data -> /var/lib/taos/ -drwxr-xr-x 2 root root 4096 Feb 22 09:34 driver/ -drwxr-xr-x 10 root root 4096 Feb 22 09:34 examples/ -drwxr-xr-x 2 root root 4096 Feb 22 09:34 include/ -lrwxrwxrwx 1 root root 13 Feb 22 09:34 log -> /var/log/taos/ -``` + ``` + $ sudo rpm -e --noscripts tdengine + ``` -During the installation process: +You can then reinstall if needed. -- Configuration directory, data directory, and log directory are created automatically if they don't exist -- The default configuration file is located at /etc/taos/taos.cfg, which is a copy of /usr/local/taos/cfg/taos.cfg -- The default data directory is /var/lib/taos, which is a soft link to /usr/local/taos/data -- The default log directory is /var/log/taos, which is a soft link to /usr/local/taos/log -- The executables at /usr/local/taos/bin are linked to /usr/bin -- The DLL files at /usr/local/taos/driver are linked to /usr/lib -- The header files at /usr/local/taos/include are linked to /usr/include +::: -:::note +Uninstalling and Modifying Files - When TDengine is uninstalled, the configuration /etc/taos/taos.cfg, data directory /var/lib/taos, log directory /var/log/taos are kept. They can be deleted manually with caution, because data can't be recovered. Please follow data integrity, security, backup or relevant SOPs before deleting any data. -- When reinstalling TDengine, if the default configuration file /etc/taos/taos.cfg exists, it will be kept and the configuration file in the installation package will be renamed to taos.cfg.orig and stored at /usr/local/taos/cfg to be used as configuration sample. Otherwise the configuration file in the installation package will be installed to /etc/taos/taos.cfg and used. - -## Start and Stop - -Linux system services `systemd`, `systemctl` or `service` are used to start, stop and restart TDengine. The server process of TDengine is `taosd`, which is started automatically after the Linux system is started. System operators can use `systemd`, `systemctl` or `service` to start, stop or restart TDengine server. - -For example, if using `systemctl` , the commands to start, stop, restart and check TDengine server are below: - -- Start server：`systemctl start taosd` - -- Stop server：`systemctl stop taosd` - -- Restart server：`systemctl restart taosd` -- Check server status：`systemctl status taosd` - -From version 2.4.0.0, a new independent component named as `taosAdapter` has been included in TDengine. `taosAdapter` should be started and stopped using `systemctl`. - -If the server process is OK, the output of `systemctl status` is like below: - -``` -Active: active (running) -``` - -Otherwise, the output is as below: - -``` -Active: inactive (dead) -``` +- When reinstalling TDengine, if the default configuration file /etc/taos/taos.cfg exists, it will be kept and the configuration file in the installation package will be renamed to taos.cfg.orig and stored at /usr/local/taos/cfg to be used as configuration sample. Otherwise the configuration file in the installation package will be installed to /etc/taos/taos.cfg and used. ## Upgrade - There are two aspects in upgrade operation: upgrade installation package and upgrade a running server. To upgrade a package, follow the steps mentioned previously to first uninstall the old version then install the new version. Upgrading a running server is much more complex. First please check the version number of the old version and the new version. The version number of TDengine consists of 4 sections, only if the first 3 sections match can the old version be upgraded to the new version. The steps of upgrading a running server are as below: - - Stop inserting data - Make sure all data is persisted to disk -- Make some simple queries (Such as total rows in stables, tables and so on. Note down the values. Follow best practices and relevant SOPs.) - Stop the cluster of TDengine - Uninstall old version and install new version - Start the cluster of TDengine -- Execute simple queries, such as the ones executed prior to installing the new package, to make sure there is no data loss +- Execute simple queries, such as the ones executed prior to installing the new package, to make sure there is no data loss - Run some simple data insertion statements to make sure the cluster works well - Restore business services :::warning - TDengine doesn't guarantee any lower version is compatible with the data generated by a higher version, so it's never recommended to downgrade the version. ::: diff --git a/docs/en/13-operation/02-planning.mdx b/docs/en/13-operation/02-planning.mdx index c1baf92dbfa8d93f83174c05c2ea631d1a469739..2dffa7bb8747e21e4754740208eafed65d341217 100644 --- a/docs/en/13-operation/02-planning.mdx +++ b/docs/en/13-operation/02-planning.mdx @@ -1,40 +1,32 @@ --- +sidebar_label: Resource Planning title: Resource Planning --- It is important to plan computing and storage resources if using TDengine to build an IoT, time-series or Big Data platform. How to plan the CPU, memory and disk resources required, will be described in this chapter. -## Memory Requirement of Server Side +## Server Memory Requirements -By default, the number of vgroups created for each database is the same as the number of CPU cores. This can be configured by the parameter `maxVgroupsPerDb`. Each vnode in a vgroup stores one replica. Each vnode consumes a fixed amount of memory, i.e. `blocks` \* `cache`. In addition, some memory is required for tag values associated with each table. A fixed amount of memory is required for each cluster. So, the memory required for each DB can be calculated using the formula below: +Each database creates a fixed number of vgroups. This number is 2 by default and can be configured with the `vgroups` parameter. The number of replicas can be controlled with the `replica` parameter. Each replica requires one vnode per vgroup. Altogether, the memory required by each database depends on the following configuration options: -``` -Database Memory Size = maxVgroupsPerDb * replica * (blocks * cache + 10MB) + numOfTables * (tagSizePerTable + 0.5KB) -``` +- vgroups +- replica +- buffer +- pages +- pagesize +- cachesize -For example, assuming the default value of `maxVgroupPerDB` is 64, the default value of `cache` is 16M, the default value of `blocks` is 6, there are 100,000 tables in a DB, the replica number is 1, total length of tag values is 256 bytes, the total memory required for this DB is: 64 \* 1 \* (16 \* 6 + 10) + 100000 \* (0.25 + 0.5) / 1000 = 6792M. +For more information, see [Database](../../taos-sql/database). -In the real operation of TDengine, we are more concerned about the memory used by each TDengine server process `taosd`. +The memory required by a database is therefore greater than or equal to: ``` - taosd_memory = vnode_memory + mnode_memory + query_memory +vgroups * replica * (buffer + pages * pagesize + cachesize) ``` -In the above formula: - -1. "vnode_memory" of a `taosd` process is the memory used by all vnodes hosted by this `taosd` process. It can be roughly calculated by firstly adding up the total memory of all DBs whose memory usage can be derived according to the formula for Database Memory Size, mentioned above, then dividing by number of dnodes and multiplying the number of replicas. - -``` - vnode_memory = (sum(Database Memory Size) / number_of_dnodes) * replica -``` - -2. "mnode_memory" of a `taosd` process is the memory consumed by a mnode. If there is one (and only one) mnode hosted in a `taosd` process, the memory consumed by "mnode" is "0.2KB \* the total number of tables in the cluster". - -3. "query_memory" is the memory used when processing query requests. Each ongoing query consumes at least "0.2 KB \* total number of involved tables". - -Please note that the above formulas can only be used to estimate the minimum memory requirement, instead of maximum memory usage. In a real production environment, it's better to reserve some redundance beyond the estimated minimum memory requirement. If memory is abundant, it's suggested to increase the value of parameter `blocks` to speed up data insertion and data query. +However, note that this requirement is spread over all dnodes in the cluster, not on a single physical machine. The physical servers that run dnodes meet the requirement together. If a cluster has multiple databases, the memory required increases accordingly. In complex environments where dnodes were added after initial deployment in response to increasing resource requirements, load may not be balanced among the original dnodes and newer dnodes. In this situation, the actual status of your dnodes is more important than theoretical calculations. -## Memory Requirement of Client Side +## Client Memory Requirements For the client programs using TDengine client driver `taosc` to connect to the server side there is a memory requirement as well. @@ -56,10 +48,10 @@ So, at least 3GB needs to be reserved for such a client. The CPU resources required depend on two aspects: -- **Data Insertion** Each dnode of TDengine can process at least 10,000 insertion requests in one second, while each insertion request can have multiple rows. The difference in computing resource consumed, between inserting 1 row at a time, and inserting 10 rows at a time is very small. So, the more the number of rows that can be inserted one time, the higher the efficiency. Inserting in batch also imposes requirements on the client side which needs to cache rows to insert in batch once the number of cached rows reaches a threshold. +- **Data Insertion** Each dnode of TDengine can process at least 10,000 insertion requests in one second, while each insertion request can have multiple rows. The difference in computing resource consumed, between inserting 1 row at a time, and inserting 10 rows at a time is very small. So, the more the number of rows that can be inserted one time, the higher the efficiency. If each insert request contains more than 200 records, a single core can process more than 1 million records per second. Inserting in batch also imposes requirements on the client side which needs to cache rows to insert in batch once the number of cached rows reaches a threshold. - **Data Query** High efficiency query is provided in TDengine, but it's hard to estimate the CPU resource required because the queries used in different use cases and the frequency of queries vary significantly. It can only be verified with the query statements, query frequency, data size to be queried, and other requirements provided by users. -In short, the CPU resource required for data insertion can be estimated but it's hard to do so for query use cases. In real operation, it's suggested to control CPU usage below 50%. If this threshold is exceeded, it's a reminder for system operator to add more nodes in the cluster to expand resources. +In short, the CPU resource required for data insertion can be estimated but it's hard to do so for query use cases. If possible, ensure that CPU usage remains below 50%. If this threshold is exceeded, it's a reminder for system operator to add more nodes in the cluster to expand resources. ## Disk Requirement @@ -77,6 +69,6 @@ To increase performance, multiple disks can be setup for parallel data reading o ## Number of Hosts -A host can be either physical or virtual. The total memory, total CPU, total disk required can be estimated according to the formulae mentioned previously. Then, according to the system resources that a single host can provide, assuming all hosts have the same resources, the number of hosts can be derived easily. +A host can be either physical or virtual. The total memory, total CPU, total disk required can be estimated according to the formulae mentioned previously. If the number of data replicas is not 1, the required resources are multiplied by the number of replicas. -**Quick Estimation for CPU, Memory and Disk** Please refer to [Resource Estimate](https://www.taosdata.com/config/config.html). +Then, according to the system resources that a single host can provide, assuming all hosts have the same resources, the number of hosts can be derived easily. diff --git a/docs/en/13-operation/03-tolerance.md b/docs/en/13-operation/03-tolerance.md index d4d48d7fcdc2c990b6ea0821e2347c70a809ed79..ba9d5d75e3415ba0a7a4e1c579327b9f73e2a48f 100644 --- a/docs/en/13-operation/03-tolerance.md +++ b/docs/en/13-operation/03-tolerance.md @@ -1,6 +1,5 @@ --- -sidebar_label: Fault Tolerance -title: Fault Tolerance & Disaster Recovery +title: Fault Tolerance and Disaster Recovery --- ## Fault Tolerance @@ -11,22 +10,21 @@ When a data block is received by TDengine, the original data block is first writ There are 2 configuration parameters related to WAL: -- walLevel： - - 0：wal is disabled - - 1：wal is enabled without fsync - - 2：wal is enabled with fsync -- fsync：This parameter is only valid when walLevel is set to 2. It specifies the interval, in milliseconds, of invoking fsync. If set to 0, it means fsync is invoked immediately once WAL is written. +- wal_level: Specifies the WAL level. 1 indicates that WAL is enabled but fsync is disabled. 2 indicates that WAL and fsync are both enabled. The default value is 1. +- wal_fsync_period: This parameter is only valid when wal_level is set to 2. It specifies the interval, in milliseconds, of invoking fsync. If set to 0, it means fsync is invoked immediately once WAL is written. -To achieve absolutely no data loss, walLevel should be set to 2 and fsync should be set to 1. There is a performance penalty to the data ingestion rate. However, if the concurrent data insertion threads on the client side can reach a big enough number, for example 50, the data ingestion performance will be still good enough. Our verification shows that the drop is only 30% when fsync is set to 3,000 milliseconds. +To achieve absolutely no data loss, set wal_level to 2 and wal_fsync_period to 0. There is a performance penalty to the data ingestion rate. However, if the concurrent data insertion threads on the client side can reach a big enough number, for example 50, the data ingestion performance will be still good enough. Our verification shows that the drop is only 30% when wal_fsync_period is set to 3000 milliseconds. ## Disaster Recovery -TDengine uses replication to provide high availability and disaster recovery capability. +TDengine uses replication to provide high availability. -A TDengine cluster is managed by mnode. To ensure the high availability of mnode, multiple replicas can be configured by the system parameter `numOfMnodes`. The data replication between mnode replicas is performed in a synchronous way to guarantee metadata consistency. +A TDengine cluster is managed by mnodes. You can configure up to three mnodes to ensure high availability. The data replication between mnode replicas is performed in a synchronous way to guarantee metadata consistency. -The number of replicas for time series data in TDengine is associated with each database. There can be many databases in a cluster and each database can be configured with a different number of replicas. When creating a database, parameter `replica` is used to configure the number of replications. To achieve high availability, `replica` needs to be higher than 1. +The number of replicas for time series data in TDengine is associated with each database. There can be many databases in a cluster and each database can be configured with a different number of replicas. When creating a database, the parameter `replica` is used to specify the number of replicas. To achieve high availability, set `replica` to 3. The number of dnodes in a TDengine cluster must NOT be lower than the number of replicas for any database, otherwise it would fail when trying to create a table. As long as the dnodes of a TDengine cluster are deployed on different physical machines and the replica number is higher than 1, high availability can be achieved without any other assistance. For disaster recovery, dnodes of a TDengine cluster should be deployed in geographically different data centers. + +Alternatively, you can use taosX to synchronize the data from one TDengine cluster to another cluster in a remote location. For more information, see [taosX](../../reference/taosX). diff --git a/docs/en/13-operation/17-diagnose.md b/docs/en/13-operation/17-diagnose.md index 2b474fddba4af5ba0c29103cd8ab1249d10d055b..d01d12e831956e6a6db654e1f6dbf5072ac6b243 100644 --- a/docs/en/13-operation/17-diagnose.md +++ b/docs/en/13-operation/17-diagnose.md @@ -13,110 +13,59 @@ Diagnostic steps： 1. If the port range to be diagnosed is being occupied by a `taosd` server process, please first stop `taosd. 2. On the server side, execute command `taos -n server -P -l ` to monitor the port range starting from the port specified by `-P` parameter with the role of "server". 3. On the client side, execute command `taos -n client -h -P -l ` to send a testing package to the specified server and port. - --l ： The size of the testing package, in bytes. The value range is [11, 64,000] and default value is 1,000. Please note that the package length must be same in the above 2 commands executed on server side and client side respectively. + +-l ： The size of the testing package, in bytes. The value range is [11, 64,000] and default value is 1,000. +Please note that the package length must be same in the above 2 commands executed on server side and client side respectively. Output of the server side for the example is below: ```bash -# taos -n server -P 6000 -12/21 14:50:13.522509 0x7f536f455200 UTL work as server, host:172.27.0.7 startPort:6000 endPort:6011 pkgLen:1000 - -12/21 14:50:13.522659 0x7f5352242700 UTL TCP server at port:6000 is listening -12/21 14:50:13.522727 0x7f5351240700 UTL TCP server at port:6001 is listening -... -... +# taos -n server -P 6030 -l 1000 +network test server is initialized, port:6030 +request is received, size:1000 +request is received, size:1000 ... -12/21 14:50:13.523954 0x7f5342fed700 UTL TCP server at port:6011 is listening -12/21 14:50:13.523989 0x7f53437ee700 UTL UDP server at port:6010 is listening -12/21 14:50:13.524019 0x7f53427ec700 UTL UDP server at port:6011 is listening -12/21 14:50:22.192849 0x7f5352242700 UTL TCP: read:1000 bytes from 172.27.0.8 at 6000 -12/21 14:50:22.192993 0x7f5352242700 UTL TCP: write:1000 bytes to 172.27.0.8 at 6000 -12/21 14:50:22.237082 0x7f5351a41700 UTL UDP: recv:1000 bytes from 172.27.0.8 at 6000 -12/21 14:50:22.237203 0x7f5351a41700 UTL UDP: send:1000 bytes to 172.27.0.8 at 6000 -12/21 14:50:22.237450 0x7f5351240700 UTL TCP: read:1000 bytes from 172.27.0.8 at 6001 -12/21 14:50:22.237576 0x7f5351240700 UTL TCP: write:1000 bytes to 172.27.0.8 at 6001 -12/21 14:50:22.281038 0x7f5350a3f700 UTL UDP: recv:1000 bytes from 172.27.0.8 at 6001 -12/21 14:50:22.281141 0x7f5350a3f700 UTL UDP: send:1000 bytes to 172.27.0.8 at 6001 ... ... -... -12/21 14:50:22.677443 0x7f5342fed700 UTL TCP: read:1000 bytes from 172.27.0.8 at 6011 -12/21 14:50:22.677576 0x7f5342fed700 UTL TCP: write:1000 bytes to 172.27.0.8 at 6011 -12/21 14:50:22.721144 0x7f53427ec700 UTL UDP: recv:1000 bytes from 172.27.0.8 at 6011 -12/21 14:50:22.721261 0x7f53427ec700 UTL UDP: send:1000 bytes to 172.27.0.8 at 6011 +request is received, size:1000 +request is received, size:1000 ``` Output of the client side for the example is below: ```bash # taos -n client -h 172.27.0.7 -P 6000 -12/21 14:50:22.192434 0x7fc95d859200 UTL work as client, host:172.27.0.7 startPort:6000 endPort:6011 pkgLen:1000 - -12/21 14:50:22.192472 0x7fc95d859200 UTL server ip:172.27.0.7 is resolved from host:172.27.0.7 -12/21 14:50:22.236869 0x7fc95d859200 UTL successed to test TCP port:6000 -12/21 14:50:22.237215 0x7fc95d859200 UTL successed to test UDP port:6000 +taos -n client -h v3s2 -P 6030 -l 1000 +network test client is initialized, the server is v3s2:6030 +request is sent, size:1000 +response is received, size:1000 +request is sent, size:1000 +response is received, size:1000 ... ... ... -12/21 14:50:22.676891 0x7fc95d859200 UTL successed to test TCP port:6010 -12/21 14:50:22.677240 0x7fc95d859200 UTL successed to test UDP port:6010 -12/21 14:50:22.720893 0x7fc95d859200 UTL successed to test TCP port:6011 -12/21 14:50:22.721274 0x7fc95d859200 UTL successed to test UDP port:6011 -``` - -The output needs to be checked carefully for the system operator to find the root cause and resolve the problem. - -## Startup Status and RPC Diagnostic - -`taos -n startup -h ` can be used to check the startup status of a `taosd` process. This is a common task which should be performed by a system operator, especially in the case of a cluster, to determine whether `taosd` has been started successfully. - -`taos -n rpc -h ` can be used to check whether the port of a started `taosd` can be accessed or not. If `taosd` process doesn't respond or is working abnormally, this command can be used to initiate a rpc communication with the specified fqdn to determine whether it's a network problem or whether `taosd` is abnormal. - -## Sync and Arbitrator Diagnostic +request is sent, size:1000 +response is received, size:1000 +request is sent, size:1000 +response is received, size:1000 -```bash -taos -n sync -P 6040 -h -taos -n sync -P 6042 -h +total succ: 100/100 cost: 16.23 ms speed: 5.87 MB/s ``` -The above commands can be executed in a Linux shell to check whether the port for sync is working well and whether the sync module on the server side is working well. Additionally, `-P 6042` is used to check whether the arbitrator is configured properly and is working well. - -## Network Speed Diagnostic - -`taos -n speed -h -P 6030 -N 10 -l 10000000 -S TCP` - -From version 2.2.0.0 onwards, the above command can be executed in a Linux shell to test network speed. The command sends uncompressed packages to a running `taosd` server process or a simulated server process started by `taos -n server` to test the network speed. Parameters can be used when testing network speed are as below: - --n：When set to "speed", it means testing network speed. --h：The FQDN or IP of the server process to be connected to; if not set, the FQDN configured in `taos.cfg` is used. --P：The port of the server process to connect to, the default value is 6030. --N：The number of packages that will be sent in the test, range is [1,10000], default value is 100. --l：The size of each package in bytes, range is [1024, 1024 \* 1024 \* 1024], default value is 1024. --S：The type of network packages to send, can be either TCP or UDP, default value is TCP. - -## FQDN Resolution Diagnostic - -`taos -n fqdn -h ` - -From version 2.2.0.0 onward, the above command can be executed in a Linux shell to test the resolution speed of FQDN. It can be used to try to resolve a FQDN to an IP address and record the time spent in this process. The parameters that can be used for this purpose are as below: - --n：When set to "fqdn", it means testing the speed of resolving FQDN. --h：The FQDN to be resolved. If not set, the `FQDN` parameter in `taos.cfg` is used by default. +The output needs to be checked carefully for the system operator to find the root cause and resolve the problem. ## Server Log -The parameter `debugFlag` is used to control the log level of the `taosd` server process. The default value is 131. For debugging and tracing, it needs to be set to either 135 or 143 respectively. - -Once this parameter is set to 135 or 143, the log file grows very quickly especially when there is a huge volume of data insertion and data query requests. If all the logs are stored together, some important information may be missed very easily and so on the server side, important information is stored in a different place from other logs. +The parameter `debugFlag` is used to control the log level of the `taosd` server process. The default value is 131. For debugging and tracing, it needs to be set to either 135 or 143 respectively. -- The log at level of INFO, WARNING and ERROR is stored in `taosinfo` so that it is easy to find important information -- The log at level of DEBUG (135) and TRACE (143) and other information not handled by `taosinfo` are stored in `taosdlog` +Once this parameter is set to 135 or 143, the log file grows very quickly especially when there is a huge volume of data insertion and data query requests. Ensure that the disk drive on which logs are stored has sufficient space. ## Client Log -An independent log file, named as "taoslog+" is generated for each client program, i.e. a client process. The default value of `debugFlag` is also 131 and only logs at level of INFO/ERROR/WARNING are recorded. As stated above, for debugging and tracing, it needs to be changed to 135 or 143 respectively, so that logs at DEBUG or TRACE level can be recorded. +An independent log file, named as "taoslog+" is generated for each client program, i.e. a client process. The parameter `debugFlag` is used to control the log level. The default value is 131. For debugging and tracing, it needs to be set to either 135 or 143 respectively. + +The default value of `debugFlag` is also 131 and only logs at level of INFO/ERROR/WARNING are recorded. As stated above, for debugging and tracing, it needs to be changed to 135 or 143 respectively, so that logs at DEBUG or TRACE level can be recorded. The maximum length of a single log file is controlled by parameter `numOfLogLines` and only 2 log files are kept for each `taosd` server process. -Log files are written in an async way to minimize the workload on disk, but the trade off for performance is that a few log lines may be lost in some extreme conditions. +Log files are written in an async way to minimize the workload on disk, but the trade off for performance is that a few log lines may be lost in some extreme conditions. You can configure asynclog to 0 when needed for troubleshooting purposes to ensure that no log information is lost.