diff --git a/docs/en/14-reference/12-config/index.md b/docs/en/14-reference/12-config/index.md index b6b535429b00796b5d2636c467153415a4281e59..532e16de5c8a8a74fb0e8a8d7df37a359bd1de59 100644 --- a/docs/en/14-reference/12-config/index.md +++ b/docs/en/14-reference/12-config/index.md @@ -1,16 +1,13 @@ --- -sidebar_label: Configuration title: Configuration Parameters description: "Configuration parameters for client and server in TDengine" --- -In this chapter, all the configuration parameters on both server and client side are described thoroughly. - ## Configuration File on Server Side On the server side, the actual service of TDengine is provided by an executable `taosd` whose parameters can be configured in file `taos.cfg` to meet the requirements of different use cases. The default location of `taos.cfg` is `/etc/taos`, but can be changed by using `-c` parameter on the CLI of `taosd`. For example, the configuration file can be put under `/home/user` and used like below -```bash +``` taosd -c /home/user ``` @@ -24,8 +21,6 @@ taosd -C TDengine CLI `taos` is the tool for users to interact with TDengine. It can share same configuration file as `taosd` or use a separate configuration file. When launching `taos`, parameter `-c` can be used to specify the location where its configuration file is. For example `taos -c /home/cfg` means `/home/cfg/taos.cfg` will be used. If `-c` is not used, the default location of the configuration file is `/etc/taos`. For more details please use `taos --help` to get. -From version 2.0.10.0 below commands can be used to show the configuration parameters of the client side. - ```bash taos -C ``` @@ -36,6 +31,11 @@ taos --dump-config # Configuration Parameters +:::note +The parameters described in this document by the effect that they have on the system. + +::: + :::note `taosd` needs to be restarted for the parameters changed in the configuration file to take effect. @@ -45,19 +45,19 @@ taos --dump-config ### firstEp -| Attribute | Description | -| ------------- | ---------------------------------------------------------------------------------------------------- | -| Applicable | Server and Client | +| Attribute | Description | +| -------- | -------------------------------------------------------------- | +| Applicable | Server and Client | | Meaning | The end point of the first dnode in the cluster to be connected to when `taosd` or `taos` is started | -| Default Value | localhost:6030 | +| Default | localhost:6030 | ### secondEp -| Attribute | Description | -| ------------- | ---------------------------------------------------------------------------------------------------------------------- | -| Applicable | Server and Client | +| Attribute | Description | +| -------- | ------------------------------------------------------------------------------------- | +| Applicable | Server and Client | | Meaning | The end point of the second dnode to be connected to if the firstEp is not available when `taosd` or `taos` is started | -| Default Value | None | +| Default | None | ### fqdn @@ -65,36 +65,28 @@ taos --dump-config | ------------- | ------------------------------------------------------------------------ | | Applicable | Server Only | | Meaning | The FQDN of the host where `taosd` will be started. It can be IP address | -| Default Value | The first hostname configured for the host | -| Note | It should be within 96 bytes | +| Default Value | The first hostname configured for the host | +| Note | It should be within 96 bytes | | ### serverPort -| Attribute | Description | -| ------------- | ------------------------------------------------------------------------------------------------------------------------------- | -| Applicable | Server Only | +| Attribute | Description | +| -------- | ----------------------------------------------------------------------------------------------------------------------- | +| Applicable | Server Only | | Meaning | The port for external access after `taosd` is started | | Default Value | 6030 | -| Note | REST service is provided by `taosd` before 2.4.0.0 but by `taosAdapter` after 2.4.0.0, the default port of REST service is 6041 | :::note -TDengine uses 13 continuous ports, both TCP and UDP, starting with the port specified by `serverPort`. You should ensure, in your firewall rules, that these ports are kept open. Below table describes the ports used by TDengine in details. - +- Ensure that your firewall rules do not block TCP port 6042 on any host in the cluster. Below table describes the ports used by TDengine in details. ::: - | Protocol | Default Port | Description | How to configure | | :------- | :----------- | :----------------------------------------------- | :--------------------------------------------------------------------------------------------- | -| TCP | 6030 | Communication between client and server | serverPort | -| TCP | 6035 | Communication among server nodes in cluster | serverPort+5 | -| TCP | 6040 | Data syncup among server nodes in cluster | serverPort+10 | +| TCP | 6030 | Communication between client and server. In a multi-node cluster, communication between nodes. serverPort | | TCP | 6041 | REST connection between client and server | Prior to 2.4.0.0: serverPort+11; After 2.4.0.0 refer to [taosAdapter](/reference/taosadapter/) | -| TCP | 6042 | Service Port of Arbitrator | The parameter of Arbitrator | -| TCP | 6043 | Service Port of TaosKeeper | The parameter of TaosKeeper | -| TCP | 6044 | Data access port for StatsD | refer to [taosAdapter](/reference/taosadapter/) | -| UDP | 6045 | Data access for statsd | refer to [taosAdapter](/reference/taosadapter/) | -| TCP | 6060 | Port of Monitoring Service in Enterprise version | | -| UDP | 6030-6034 | Communication between client and server | serverPort | -| UDP | 6035-6039 | Communication among server nodes in cluster | serverPort | +| TCP | 6043 | Service Port of TaosKeeper | The parameter of TaosKeeper | +| TCP | 6044 | Data access port for StatsD | Configurable through taosAdapter parameters. +| UDP | 6045 | Data access for statsd | Configurable through taosAdapter parameters. +| TCP | 6060 | Port of Monitoring Service in Enterprise version | | ### maxShellConns @@ -105,104 +97,109 @@ TDengine uses 13 continuous ports, both TCP and UDP, starting with the port spec | Value Range | 10-50000000 | | Default Value | 5000 | -### maxConnections +## Monitoring Parameters -| Attribute | Description | -| ------------- | ----------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | The maximum number of connections allowed by a database | -| Value Range | 1-100000 | -| Default Value | 5000 | -| Note | The maximum number of worker threads on the client side is maxConnections/100 | +### monitor -### rpcForceTcp +| Attribute | Description | +| -------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | +| Applicable | Server only | +| Meaning | The switch for monitoring inside server. The main object of monitoring is to collect information about load on physical nodes, including CPU usage, memory usage, disk usage, and network bandwidth. Monitoring information is sent over HTTP to the taosKeeper service specified by `monitorFqdn` and `monitorProt`. +| Value Range | 0: monitoring disabled, 1: monitoring enabled | +| Default | 1 | -| Attribute | Description | -| ------------- | ------------------------------------------------------------------- | -| Applicable | Server and Client | -| Meaning | TCP is used by force | -| Value Range | 0: disabled 1: enabled | -| Default Value | 0 | -| Note | It's suggested to configure to enable if network is not good enough | +### monitorFqdn -## Monitoring Parameters +| Attribute | Description | +| -------- | -------------------------- | +| Applicable | Server Only | +| Meaning | FQDN of taosKeeper monitoring service | +| Default | None | -### monitor +### monitorPort -| Attribute | Description | -| ------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | The switch for monitoring inside server. The workload of the hosts, including CPU, memory, disk, network, TTP requests, are collected and stored in a system builtin database `LOG` | -| Value Range | 0: monitoring disabled, 1: monitoring enabled | -| Default Value | 1 | +| Attribute | Description | +| -------- | --------------------------- | +| Applicable | Server Only | +| Meaning | Port of taosKeeper monitoring service | +| Default Value | 6043 | ### monitorInterval -| Attribute | Description | -| ------------- | ------------------------------------------ | -| Applicable | Server Only | +| Attribute | Description | +| -------- | -------------------------------------------- | +| Applicable | Server Only | | Meaning | The interval of collecting system workload | | Unit | second | -| Value Range | 1-600 | -| Default Value | 30 | +| Value Range | 1-200000 | +| Default Value | 30 | ### telemetryReporting -| Attribute | Description | -| ------------- | ---------------------------------------------------------------------------- | -| Applicable | Server Only | +| Attribute | Description | +| -------- | ---------------------------------------- | +| Applicable | Server Only | | Meaning | Switch for allowing TDengine to collect and report service usage information | | Value Range | 0: Not allowed; 1: Allowed | -| Default Value | 1 | +| Default Value | 1 | ## Query Parameters -### queryBufferSize +### queryPolicy -| Attribute | Description | -| ------------- | ---------------------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | The total memory size reserved for all queries | -| Unit | MB | -| Default Value | None | -| Note | It can be estimated by "maximum number of concurrent queries" _ "number of tables" _ 170 | +| Attribute | Description | +| -------- | ----------------------------- | +| Applicable | Client only | +| Meaning | Execution policy for query statements | +| Unit | None | +| Default | 1 | +| Notes | 1: Run queries on vnodes and not on qnodes | -### ratioOfQueryCores +2: Run subtasks without scan operators on qnodes and subtasks with scan operators on vnodes. + +3: Only run scan operators on vnodes; run all other operators on qnodes. + +### querySmaOptimize + +| Attribute | Description | +| -------- | -------------------- | +| Applicable | Client only | +| 含义 | SMA index optimization policy | +| Unit | None | +| Default Value | 0 | +| Notes | + +0: Disable SMA indexing and perform all queries on non-indexed data. + +1: Enable SMA indexing and perform queries from suitable statements on precomputation results.| -| Attribute | Description | -| ------------- | ----------------------------------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | Maximum number of query threads | -| Default Value | 1 | -| Note | value range: float number between [0, 2] 0: only 1 query thread; >0: the times of the number of cores | ### maxNumOfDistinctRes -| Attribute | Description | -| ------------- | -------------------------------------------- | -| Applicable | Server Only | +| Attribute | Description | +| -------- | -------------------------------- | --- | +| Applicable | Server Only | | Meaning | The maximum number of distinct rows returned | | Value Range | [100,000 - 100,000,000] | | Default Value | 100,000 | -| Note | After version 2.3.0.0 | ## Locale Parameters ### timezone -| Attribute | Description | -| ------------- | ------------------------------- | -| Applicable | Server and Client | +| Attribute | Description | +| -------- | ------------------------------ | +| Applicable | Server and Client | | Meaning | TimeZone | | Default Value | TimeZone configured in the host | :::info -To handle the data insertion and data query from multiple timezones, Unix Timestamp is used and stored in TDengine. The timestamp generated from any timezones at same time is same in Unix timestamp. To make sure the time on client side can be converted to Unix timestamp correctly, the timezone must be set properly. +To handle the data insertion and data query from multiple timezones, Unix Timestamp is used and stored in TDengine. The timestamp generated from any timezones at same time is same in Unix timestamp. Note that Unix timestamps are converted and recorded on the client side. To make sure the time on client side can be converted to Unix timestamp correctly, the timezone must be set properly. -On Linux system, TDengine clients automatically obtain timezone from the host. Alternatively, the timezone can be configured explicitly in configuration file `taos.cfg` like below. +On Linux system, TDengine clients automatically obtain timezone from the host. Alternatively, the timezone can be configured explicitly in configuration file `taos.cfg` like below. For example: ``` -timezone UTC-7 +timezone UTC-8 timezone GMT-8 timezone Asia/Shanghai ``` @@ -240,11 +237,11 @@ To avoid the problems of using time strings, Unix timestamp can be used directly | Default Value | Locale configured in host | :::info -A specific type "nchar" is provided in TDengine to store non-ASCII characters such as Chinese, Japanese, and Korean. The characters to be stored in nchar type are firstly encoded in UCS4-LE before sending to server side. To store non-ASCII characters correctly, the encoding format of the client side needs to be set properly. +A specific type "nchar" is provided in TDengine to store non-ASCII characters such as Chinese, Japanese, and Korean. The characters to be stored in nchar type are firstly encoded in UCS4-LE before sending to server side. Note that the correct encoding is determined by the user. To store non-ASCII characters correctly, the encoding format of the client side needs to be set properly. The characters input on the client side are encoded using the default system encoding, which is UTF-8 on Linux, or GB18030 or GBK on some systems in Chinese, POSIX in docker, CP936 on Windows in Chinese. The encoding of the operating system in use must be set correctly so that the characters in nchar type can be converted to UCS4-LE. -The locale definition standard on Linux is: \_., for example, in "zh_CN.UTF-8", "zh" means Chinese, "CN" means China mainland, "UTF-8" means charset. On Linux and Mac OSX, the charset can be set by locale in the system. On Windows system another configuration parameter `charset` must be used to configure charset because the locale used on Windows is not POSIX standard. Of course, `charset` can also be used on Linux to specify the charset. +The locale definition standard on Linux is: \_., for example, in "zh_CN.UTF-8", "zh" means Chinese, "CN" means China mainland, "UTF-8" means charset. The charset indicates how to display the characters. On Linux and Mac OSX, the charset can be set by locale in the system. On Windows system another configuration parameter `charset` must be used to configure charset because the locale used on Windows is not POSIX standard. Of course, `charset` can also be used on Linux to specify the charset. ::: @@ -257,29 +254,37 @@ The locale definition standard on Linux is: \_., f | Default Value | charset set in the system | :::info -On Linux, if `charset` is not set in `taos.cfg`, when `taos` is started, the charset is obtained from system locale. If obtaining charset from system locale fails, `taos` would fail to start. So on Linux system, if system locale is set properly, it's not necessary to set `charset` in `taos.cfg`. For example: +On Linux, if `charset` is not set in `taos.cfg`, when `taos` is started, the charset is obtained from system locale. If obtaining charset from system locale fails, `taos` would fail to start. + +So on Linux system, if system locale is set properly, it's not necessary to set `charset` in `taos.cfg`. For example: ``` locale zh_CN.UTF-8 ``` +On Windows system, it's not possible to obtain charset from system locale. If it's not set in configuration file `taos.cfg`, it would be default to CP936, same as set as below in `taos.cfg`. For example + +``` +charset CP936 +``` + +Refer to the documentation for your operating system before changing the charset. + On a Linux system, if the charset contained in `locale` is not consistent with that set by `charset`, the later setting in the configuration file takes precedence. -```title="Effective charset is GBK" +``` locale zh_CN.UTF-8 charset GBK ``` -```title="Effective charset is UTF-8" +The charset that takes effect is GBK. + +``` charset GBK locale zh_CN.UTF-8 ``` -On Windows system, it's not possible to obtain charset from system locale. If it's not set in configuration file `taos.cfg`, it would be default to CP936, same as set as below in `taos.cfg`. For example - -``` -charset CP936 -``` +The charset that takes effect is UTF-8. ::: @@ -287,834 +292,528 @@ charset CP936 ### dataDir -| Attribute | Description | -| ------------- | ------------------------------------------- | +| Attribute | Description | +| -------- | ------------------------------------------ | | Applicable | Server Only | | Meaning | All data files are stored in this directory | | Default Value | /var/lib/taos | -### cache - -| Attribute | Description | -| ------------- | ----------------------------- | -| Applicable | Server Only | -| Meaning | The size of each memory block | -| Unit | MB | -| Default Value | 16 | - -### blocks - -| Attribute | Description | -| ------------- | -------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | The number of memory blocks of size `cache` used by each vnode | -| Default Value | 6 | - -### days - -| Attribute | Description | -| ------------- | ----------------------------------------------------- | -| Applicable | Server Only | -| Meaning | The time range of the data stored in single data file | -| Unit | day | -| Default Value | 10 | - -### keep - -| Attribute | Description | -| ------------- | -------------------------------------- | -| Applicable | Server Only | -| Meaning | The number of days for data to be kept | -| Unit | day | -| Default Value | 3650 | - -### minRows - -| Attribute | Description | -| ------------- | ------------------------------------------ | -| Applicable | Server Only | -| Meaning | minimum number of rows in single data file | -| Default Value | 100 | - -### maxRows - -| Attribute | Description | -| ------------- | ------------------------------------------ | -| Applicable | Server Only | -| Meaning | maximum number of rows in single data file | -| Default Value | 4096 | - -### walLevel - -| Attribute | Description | -| ------------- | ---------------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | WAL level | -| Value Range | 0: wal disabled
1: wal enabled without fsync
2: wal enabled with fsync | -| Default Value | 1 | - -### fsync - -| Attribute | Description | -| ------------- | --------------------------------------------------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | The waiting time for invoking fsync when walLevel is 2 | -| Unit | millisecond | -| Value Range | 0: no waiting time, fsync is performed immediately once WAL is written;
maximum value is 180000, i.e. 3 minutes | -| Default Value | 3000 | - -### update - -| Attribute | Description | -| ------------- | ------------------------------------------------------------------------------------------------------ | -| Applicable | Server Only | -| Meaning | If it's allowed to update existing data | -| Value Range | 0: not allowed
1: a row can only be updated as a whole
2: a part of columns can be updated | -| Default Value | 0 | -| Note | Not available from version 2.0.8.0 | - -### cacheLast - -| Attribute | Description | -| ------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | Whether to cache the latest rows of each sub table in memory | -| Value Range | 0: not cached
1: the last row of each sub table is cached
2: the last non-null value of each column is cached
3: identical to both 1 and 2 are set | -| Default Value | 0 | - ### minimalTmpDirGB -| Attribute | Description | -| ------------- | ----------------------------------------------------------------------------------------------- | -| Applicable | Server and Client | +| Attribute | Description | +| -------- | ------------------------------------------------ | +| Applicable | Server and Client | | Meaning | When the available disk space in tmpDir is below this threshold, writing to tmpDir is suspended | -| Unit | GB | -| Default Value | 1.0 | +| Unit | GB | +| Default Value | 1.0 | ### minimalDataDirGB -| Attribute | Description | -| ------------- | ------------------------------------------------------------------------------------------------ | -| Applicable | Server Only | -| Meaning | hen the available disk space in dataDir is below this threshold, writing to dataDir is suspended | -| Unit | GB | -| Default Value | 2.0 | - -### vnodeBak - -| Attribute | Description | -| ------------- | --------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | Whether to backup the corresponding vnode directory when a vnode is deleted | -| Value Range | 0: not backed up, 1: backup | -| Default Value | 1 | +| Attribute | Description | +| -------- | ------------------------------------------------ | +| Applicable | Server Only | +| Meaning | When the available disk space in dataDir is below this threshold, writing to dataDir is suspended | +| Unit | GB | +| Default Value | 2.0 | ## Cluster Parameters -### numOfMnodes - -| Attribute | Description | -| ------------- | ------------------------------ | -| Applicable | Server Only | -| Meaning | The number of management nodes | -| Default Value | 3 | - -### replica - -| Attribute | Description | -| ------------- | -------------------------- | -| Applicable | Server Only | -| Meaning | The number of replications | -| Value Range | 1-3 | -| Default Value | 1 | - -### quorum - -| Attribute | Description | -| ------------- | ------------------------------------------------------------------------------------------ | -| Applicable | Server Only | -| Meaning | The number of required confirmations for data replication in case of multiple replications | -| Value Range | 1,2 | -| Default Value | 1 | - -### role - -| Attribute | Description | -| ------------- | --------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | The role of the dnode | -| Value Range | 0: both mnode and vnode
1: mnode only
2: dnode only | -| Default Value | 0 | - -### balance - -| Attribute | Description | -| ------------- | ------------------------ | -| Applicable | Server Only | -| Meaning | Automatic load balancing | -| Value Range | 0: disabled, 1: enabled | -| Default Value | 1 | +### supportVnodes -### balanceInterval - -| Attribute | Description | -| ------------- | ----------------------------------------------- | -| Applicable | Server Only | -| Meaning | The interval for checking load balance by mnode | -| Unit | second | -| Value Range | 1-30000 | -| Default Value | 300 | - -### arbitrator - -| Attribute | Description | -| ------------- | -------------------------------------------------- | -| Applicable | Server Only | -| Meaning | End point of arbitrator, format is same as firstEp | -| Default Value | None | +| Attribute | Description | +| -------- | --------------------------- | +| Applicable | Server Only | +| Meaning | Maximum number of vnodes per dnode | +| Value Range | 0-4096 | +| Default Value | 256 | ## Time Parameters -### precision - -| Attribute | Description | -| ------------- | ------------------------------------------------- | -| Applicable | Server only | -| Meaning | Time precision used for each database | -| Value Range | ms: millisecond; us: microsecond ; ns: nanosecond | -| Default Value | ms | - -### rpcTimer - -| Attribute | Description | -| ------------- | ------------------ | -| Applicable | Server and Client | -| Meaning | rpc retry interval | -| Unit | milliseconds | -| Value Range | 100-3000 | -| Default Value | 300 | - -### rpcMaxTime - -| Attribute | Description | -| ------------- | ---------------------------------- | -| Applicable | Server and Client | -| Meaning | maximum wait time for rpc response | -| Unit | second | -| Value Range | 100-7200 | -| Default Value | 600 | - ### statusInterval -| Attribute | Description | -| ------------- | ----------------------------------------------- | -| Applicable | Server Only | +| Attribute | Description | +| -------- | --------------------------- | +| Applicable | Server Only | | Meaning | the interval of dnode reporting status to mnode | | Unit | second | -| Value Range | 1-10 | -| Default Value | 1 | +| Value Range | 1-10 | +| Default Value | 1 | ### shellActivityTimer -| Attribute | Description | -| ------------- | ------------------------------------------------------ | -| Applicable | Server and Client | +| Attribute | Description | +| -------- | --------------------------------- | +| Applicable | Server and Client | | Meaning | The interval for taos shell to send heartbeat to mnode | -| Unit | second | -| Value Range | 1-120 | -| Default Value | 3 | - -### tableMetaKeepTimer - -| Attribute | Description | -| ------------- | -------------------------------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | The expiration time for metadata in cache, once it's reached the client would refresh the metadata | -| Unit | second | -| Value Range | 1-8640000 | -| Default Value | 7200 | - -### maxTmrCtrl - -| Attribute | Description | -| ------------- | ------------------------ | -| Applicable | Server and Client | -| Meaning | Maximum number of timers | -| Unit | None | -| Value Range | 8-2048 | -| Default Value | 512 | - -### offlineThreshold - -| Attribute | Description | -| ------------- | ----------------------------------------------------------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | The expiration time for dnode online status, once it's reached before receiving status from a node, the dnode becomes offline | -| Unit | second | -| Value Range | 5-7200000 | -| Default Value | 86400\*10 (i.e. 10 days) | +| Unit | second | +| Value Range | 1-120 | +| Default Value | 3 | ## Performance Optimization Parameters -### numOfThreadsPerCore - -| Attribute | Description | -| ------------- | ------------------------------------------- | -| Applicable | Server and Client | -| Meaning | The number of consumer threads per CPU core | -| Default Value | 1.0 | - -### ratioOfQueryThreads - -| Attribute | Description | -| ------------- | --------------------------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | Maximum number of query threads | -| Value Range | 0: Only one query thread
1: Same as number of CPU cores
2: two times of CPU cores | -| Default Value | 1 | -| Note | This value can be a float number, 0.5 means half of the CPU cores | - -### maxVgroupsPerDb - -| Attribute | Description | -| ------------- | ------------------------------------ | -| Applicable | Server Only | -| Meaning | Maximum number of vnodes for each DB | -| Value Range | 0-8192 | -| Default Value | | - -### maxTablesPerVnode - -| Attribute | Description | -| ------------- | -------------------------------------- | -| Applicable | Server Only | -| Meaning | Maximum number of tables in each vnode | -| Default Value | 1000000 | - -### minTablesPerVnode - -| Attribute | Description | -| ------------- | -------------------------------------- | -| Applicable | Server Only | -| Meaning | Minimum number of tables in each vnode | -| Default Value | 1000 | - -### tableIncStepPerVnode - -| Attribute | Description | -| ------------- | ------------------------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | When minTablesPerVnode is reached, the number of tables are allocated for a vnode each time | -| Default Value | 1000 | - -### maxNumOfOrderedRes - -| Attribute | Description | -| ------------- | ------------------------------------------- | -| Applicable | Server and Client | -| Meaning | Maximum number of rows ordered for a STable | -| Default Value | 100,000 | - -### mnodeEqualVnodeNum - -| Attribute | Description | -| ------------- | ----------------------------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | The number of vnodes whose system resources consumption are considered as equal to single mnode | -| Default Value | 4 | - ### numOfCommitThreads -| Attribute | Description | -| ------------- | ----------------------------------------- | -| Applicable | Server Only | +| Attribute | Description | +| -------- | ---------------------- | +| Applicable | Server Only | | Meaning | Maximum of threads for committing to disk | -| Default Value | | +| Default Value | | ## Compression Parameters -### comp - -| Attribute | Description | -| ------------- | ------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | Whether data is compressed | -| Value Range | 0: uncompressed, 1: One phase compression, 2: Two phase compression | -| Default Value | 2 | - -### tsdbMetaCompactRatio - -| Attribute | Description | -| ------------- | ------------------------------------------------------------------------------------------- | -| Meaning | The threshold for percentage of redundant in meta file to trigger compression for meta file | -| Value Range | 0: no compression forever, [1-100]: The threshold percentage | -| Default Value | 0 | - ### compressMsgSize -| Attribute | Description | -| ------------- | -------------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | The threshold for message size to compress the message.. | +| Attribute | Description | +| ------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | +| Applicable | Server Only | +| Meaning | The threshold for message size to compress the message. | Set the value to 64330 bytes for good message compression. | | Unit | bytes | | Value Range | 0: already compress; >0: compress when message exceeds it; -1: always uncompress | -| Default Value | -1 | +| Default Value | -1 | ### compressColData -| Attribute | Description | -| ------------- | ------------------------------------------------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | The threshold for size of column data to trigger compression for the query result | +| Attribute | Description | +| -------- | --------------------------------------------------------------------------------------- | +| Applicable | Server Only | +| Meaning | The threshold for size of column data to trigger compression for the query result | | Unit | bytes | | Value Range | 0: always compress; >0: only compress when the size of any column data exceeds the threshold; -1: always uncompress | -| Default Value | -1 | -| Note | available from version 2.3.0.0 | - -### lossyColumns - -| Attribute | Description | -| ------------- | ------------------------------------------------------------------------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | The floating number types for lossy compression | -| Value Range | "": lossy compression is disabled
float: only for float
double: only for double
float \| double: for both float and double | -| Default Value | "" , i.e. disabled | - -### fPrecision - -| Attribute | Description | -| ------------- | ----------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | Compression precision for float type | -| Value Range | 0.1 ~ 0.00000001 | -| Default Value | 0.00000001 | -| Note | The fractional part lower than this value will be discarded | - -### dPrecision - -| Attribute | Description | -| ------------- | ----------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | Compression precision for double type | -| Value Range | 0.1 ~ 0.0000000000000001 | -| Default Value | 0.0000000000000001 | -| Note | The fractional part lower than this value will be discarded | - -## Continuous Query Parameters - -### stream - -| Attribute | Description | -| ------------- | ---------------------------------- | -| Applicable | Server Only | -| Meaning | Whether to enable continuous query | -| Value Range | 0: disabled
1: enabled | -| Default Value | 1 | - -### minSlidingTime - -| Attribute | Description | -| ------------- | -------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | Minimum sliding time of time window | -| Unit | millisecond or microsecond , depending on time precision | -| Value Range | 10-1000000 | -| Default Value | 10 | - -### minIntervalTime - -| Attribute | Description | -| ------------- | --------------------------- | -| Applicable | Server Only | -| Meaning | Minimum size of time window | -| Unit | millisecond | -| Value Range | 1-1000000 | -| Default Value | 10 | - -### maxStreamCompDelay - -| Attribute | Description | -| ------------- | ------------------------------------------------ | -| Applicable | Server Only | -| Meaning | Maximum delay before starting a continuous query | -| Unit | millisecond | -| Value Range | 10-1000000000 | -| Default Value | 20000 | - -### maxFirstStreamCompDelay - -| Attribute | Description | -| ------------- | -------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | Maximum delay time before starting a continuous query the first time | -| Unit | millisecond | -| Value Range | 10-1000000000 | -| Default Value | 10000 | - -### retryStreamCompDelay - -| Attribute | Description | -| ------------- | --------------------------------------------- | -| Applicable | Server Only | -| Meaning | Delay time before retrying a continuous query | -| Unit | millisecond | -| Value Range | 10-1000000000 | -| Default Value | 10 | - -### streamCompDelayRatio - -| Attribute | Description | -| ------------- | ------------------------------------------------------------------------ | -| Applicable | Server Only | -| Meaning | The delay ratio, with time window size as the base, for continuous query | -| Value Range | 0.1-0.9 | -| Default Value | 0.1 | - -:::info -To prevent system resource from being exhausted by multiple concurrent streams, a random delay is applied on each stream automatically. `maxFirstStreamCompDelay` is the maximum delay time before a continuous query is started the first time. `streamCompDelayRatio` is the ratio for calculating delay time, with the size of the time window as base. `maxStreamCompDelay` is the maximum delay time. The actual delay time is a random time not bigger than `maxStreamCompDelay`. If a continuous query fails, `retryStreamComDelay` is the delay time before retrying it, also not bigger than `maxStreamCompDelay`. - -::: - -## HTTP Parameters - -:::note -HTTP service was provided by `taosd` prior to version 2.4.0.0 and is provided by `taosAdapter` after version 2.4.0.0. -The parameters described in this section are only application in versions prior to 2.4.0.0. If you are using any version from 2.4.0.0, please refer to [taosAdapter](/reference/taosadapter/). - -::: - -### http - -| Attribute | Description | -| ------------- | ------------------------------ | -| Applicable | Server Only | -| Meaning | Whether to enable http service | -| Value Range | 0: disabled, 1: enabled | -| Default Value | 1 | - -### httpEnableRecordSql - -| Attribute | Description | -| ------------- | ------------------------------------------------------------------------- | -| Applicable | Server Only | -| Meaning | Whether to record the SQL invocation through REST interface | -| Default Value | 0: false; 1: true | -| Note | The resulting files, i.e. httpnote.0/httpnote.1, are located under logDir | - -### httpMaxThreads - -| Attribute | Description | -| ------------- | -------------------------------------------- | -| Applicable | Server Only | -| Meaning | The number of threads for RESTFul interface. | -| Default Value | 2 | - -### restfulRowLimit - -| Attribute | Description | -| ------------- | ------------------------------------------------------------ | -| Applicable | Server Only | -| Meaning | Maximum number of rows returned each time by REST interface. | -| Default Value | 10240 | -| Note | Maximum value is 10,000,000 | - -### httpDBNameMandatory - -| Attribute | Description | -| ------------- | ---------------------------------------- | -| Applicable | Server Only | -| Meaning | Whether database name is required in URL | -| Value Range | 0:not required, 1: required | -| Default Value | 0 | -| Note | From version 2.3.0.0 | +| Default Value | -1 | ## Log Parameters ### logDir -| Attribute | Description | -| ------------- | ----------------------------------- | -| Applicable | Server and Client | +| Attribute | Description | +| -------- | -------------------------------------------------- | +| Applicable | Server and Client | | Meaning | The directory for writing log files | | Default Value | /var/log/taos | ### minimalLogDirGB -| Attribute | Description | -| ------------- | -------------------------------------------------------------------------------------------------- | -| Applicable | Server and Client | +| Attribute | Description | +| -------- | -------------------------------------------- | +| Applicable | Server and Client | | Meaning | When the available disk space in logDir is below this threshold, writing to log files is suspended | -| Unit | GB | -| Default Value | 1.0 | +| Unit | GB | +| Default Value | 1.0 | ### numOfLogLines -| Attribute | Description | -| ------------- | ------------------------------------------ | -| Applicable | Server and Client | +| Attribute | Description | +| -------- | ---------------------------- | +| Applicable | Server and Client | | Meaning | Maximum number of lines in single log file | -| Default Value | 10,000,000 | +| Default Value | 10000000 | ### asyncLog -| Attribute | Description | -| ------------- | ---------------------------- | -| Applicable | Server and Client | +| Attribute | Description | +| -------- | -------------------- | +| Applicable | Server and Client | | Meaning | The mode of writing log file | | Value Range | 0: sync way; 1: async way | -| Default Value | 1 | +| Default Value | 1 | ### logKeepDays -| Attribute | Description | -| ------------- | ------------------------------------------------------------------------------------------------------------------------------------------- | -| Applicable | Server and Client | +| Attribute | Description | +| -------- | ----------------------------------------------------------------------------------- | +| Applicable | Server and Client | | Meaning | The number of days for log files to be kept | -| Unit | day | -| Default Value | 0 | +| Unit | day | +| Default Value | 0 | | Note | When it's bigger than 0, the log file would be renamed to "taosdlog.xxx" in which "xxx" is the timestamp when the file is changed last time | ### debugFlag -| Attribute | Description | -| ------------- | --------------------------------------------------------- | -| Applicable | Server and Client | +| Attribute | Description | +| -------- | ------------------------------------------------------------------------------------------------- | +| Applicable | Server and Client | | Meaning | Log level | | Value Range | 131: INFO/WARNING/ERROR; 135: plus DEBUG; 143: plus TRACE | | Default Value | 131 or 135, depending on the module | -### mDebugFlag +### tmrDebugFlag -| Attribute | Description | -| ------------- | ------------------ | -| Applicable | Server Only | -| Meaning | Log level of mnode | +| Attribute | Description | +| -------- | -------------------- | +| Applicable | Server and Client | +| Meaning | Log level of timer module | | Value Range | same as debugFlag | -| Default Value | 135 | +| Default Value | | -### dDebugFlag +### uDebugFlag -| Attribute | Description | -| ------------- | ------------------ | -| Applicable | Server and Client | -| Meaning | Log level of dnode | +| Attribute | Description | +| -------- | ---------------------- | +| Applicable | Server and Client | +| Meaning | Log level of common module | | Value Range | same as debugFlag | -| Default Value | 135 | - -### sDebugFlag - -| Attribute | Description | -| ------------- | ------------------------ | -| Applicable | Server and Client | -| Meaning | Log level of sync module | -| Value Range | same as debugFlag | -| Default Value | 135 | - -### wDebugFlag - -| Attribute | Description | -| ------------- | ----------------------- | -| Applicable | Server and Client | -| Meaning | Log level of WAL module | -| Value Range | same as debugFlag | -| Default Value | 135 | - -### sdbDebugFlag - -| Attribute | Description | -| ------------- | ---------------------- | -| Applicable | Server and Client | -| Meaning | logLevel of sdb module | -| Value Range | same as debugFlag | -| Default Value | 135 | +| Default Value | | ### rpcDebugFlag -| Attribute | Description | -| ------------- | ----------------------- | -| Applicable | Server and Client | +| Attribute | Description | +| -------- | -------------------- | +| Applicable | Server and Client | | Meaning | Log level of rpc module | -| Value Range | Same as debugFlag | -| Default Value | | +| Value Range | same as debugFlag | +| Default Value | | -### tmrDebugFlag +### jniDebugFlag -| Attribute | Description | -| ------------- | ------------------------- | +| Attribute | Description | +| -------- | ------------------ | +| Applicable | Client Only | +| Meaning | Log level of jni module | +| Value Range | same as debugFlag | +| Default Value | | + +### qDebugFlag + +| Attribute | Description | +| -------- | -------------------- | | Applicable | Server and Client | -| Meaning | Log level of timer module | -| Value Range | Same as debugFlag | -| Default Value | | +| Meaning | Log level of query module | +| Value Range | same as debugFlag | +| Default Value | | ### cDebugFlag -| Attribute | Description | -| ------------- | ------------------- | +| Attribute | Description | +| -------- | --------------------- | | Applicable | Client Only | | Meaning | Log level of Client | -| Value Range | Same as debugFlag | -| Default Value | | - -### jniDebugFlag - -| Attribute | Description | -| ------------- | ----------------------- | -| Applicable | Client Only | -| Meaning | Log level of jni module | -| Value Range | Same as debugFlag | -| Default Value | | - -### odbcDebugFlag - -| Attribute | Description | -| ------------- | ------------------------ | -| Applicable | Client Only | -| Meaning | Log level of odbc module | -| Value Range | Same as debugFlag | -| Default Value | | +| Value Range | same as debugFlag | +| Default Value | | -### uDebugFlag +### dDebugFlag -| Attribute | Description | -| ------------- | -------------------------- | -| Applicable | Server and Client | -| Meaning | Log level of common module | -| Value Range | Same as debugFlag | -| Default Value | | +| Attribute | Description | +| -------- | -------------------- | +| Applicable | Server Only | +| Meaning | Log level of dnode | +| Value Range | same as debugFlag | +| Default Value | 135 | -### httpDebugFlag +### vDebugFlag -| Attribute | Description | -| ------------- | ------------------------------------------- | -| Applicable | Server Only | -| Meaning | Log level of http module (prior to 2.4.0.0) | -| Value Range | Same as debugFlag | -| Default Value | | +| Attribute | Description | +| -------- | -------------------- | +| Applicable | Server Only | +| Meaning | Log level of vnode | +| Value Range | same as debugFlag | +| Default Value | | -### mqttDebugFlag +### mDebugFlag -| Attribute | Description | -| ------------- | ------------------------ | -| Applicable | Server Only | -| Meaning | Log level of mqtt module | -| Value Range | Same as debugFlag | -| Default Value | | +| Attribute | Description | +| -------- | -------------------- | +| Applicable | Server Only | +| Meaning | Log level of mnode module | +| Value Range | same as debugFlag | +| Default Value | 135 | -### monitorDebugFlag +### wDebugFlag -| Attribute | Description | -| ------------- | ------------------------------ | -| Applicable | Server Only | -| Meaning | Log level of monitoring module | -| Value Range | Same as debugFlag | -| Default Value | | +| Attribute | Description | +| -------- | ------------------ | +| Applicable | Server Only | +| Meaning | Log level of WAL module | +| Value Range | same as debugFlag | +| Default Value | 135 | -### qDebugFlag +### sDebugFlag -| Attribute | Description | -| ------------- | ------------------------- | +| Attribute | Description | +| -------- | -------------------- | | Applicable | Server and Client | -| Meaning | Log level of query module | -| Value Range | Same as debugFlag | -| Default Value | | - -### vDebugFlag - -| Attribute | Description | -| ------------- | ------------------ | -| Applicable | Server and Client | -| Meaning | Log level of vnode | -| Value Range | Same as debugFlag | -| Default Value | | +| Meaning | Log level of sync module | +| Value Range | same as debugFlag | +| Default Value | 135 | ### tsdbDebugFlag -| Attribute | Description | -| ------------- | ------------------------ | -| Applicable | Server Only | -| Meaning | Log level of TSDB module | -| Value Range | Same as debugFlag | -| Default Value | | +| Attribute | Description | +| -------- | ------------------- | +| Applicable | Server Only | +| Meaning | Log level of TSDB module | +| Value Range | same as debugFlag | +| Default Value | | -### cqDebugFlag +### tqDebugFlag | Attribute | Description | -| ------------- | ------------------------------------ | -| Applicable | Server and Client | -| Meaning | Log level of continuous query module | -| Value Range | Same as debugFlag | -| Default Value | | +| -------- | ----------------- | +| Applicable | Server only | +| Meaning | Log level of TQ module | +| Value Range | same as debugFlag | +| Default Value | | -## Client Only +### fsDebugFlag -### maxSQLLength +| Attribute | Description | +| -------- | ----------------- | +| Applicable | Server only | +| Meaning | Log level of FS module | +| Value Range | same as debugFlag | +| Default Value | | + +### udfDebugFlag | Attribute | Description | -| ------------- | -------------------------------------- | -| Applicable | Client Only | -| Meaning | Maximum length of single SQL statement | -| Unit | bytes | -| Value Range | 65480-1048576 | -| Default Value | 1048576 | +| -------- | ------------------ | +| Applicable | Server Only | +| Meaning | Log level of UDF module | +| Value Range | same as debugFlag | +| Default Value | | -### tscEnableRecordSql +### smaDebugFlag -| Attribute | Description | -| ------------- | ------------------------------------------------------------------------------------------------------------------------------------------------- | -| Meaning | Whether to record SQL statements in file | -| Value Range | 0: false, 1: true | -| Default Value | 0 | -| Note | The generated files are named as "tscnote-xxxx.0/tscnote-xxx.1" in which "xxxx" is the pid of the client, and located at same place as client log | +| Attribute | Description | +| -------- | ------------------ | +| Applicable | Server Only | +| Meaning | Log level of SMA module | +| Value Range | same as debugFlag | +| Default Value | | -### maxBinaryDisplayWidth +### idxDebugFlag -| Attribute | Description | -| ------------- | --------------------------------------------------------------------------------------------------- | -| Meaning | Maximum display width of binary and nchar in taos shell. Anything beyond this limit would be hidden | -| Value Range | 5 - | -| Default Value | 30 | +| Attribute | Description | +| -------- | -------------------- | +| Applicable | Server Only | +| Meaning | Log level of index module | +| Value Range | same as debugFlag | +| Default Value | | -:::info -If the length of value exceeds `maxBinaryDisplayWidth`, then the actual display width is max(column name, maxBinaryDisplayLength); otherwise the actual display width is max(length of column name, length of column value). This parameter can also be changed dynamically using `set max_binary_display_width ` in TDengine CLI `taos`. +### tdbDebugFlag -::: +| Attribute | Description | +| -------- | ------------------ | +| Applicable | Server Only | +| Meaning | Log level of TDB module | +| Value Range | same as debugFlag | +| Default Value | | -### maxWildCardsLength +## Schemaless Parameters -| Attribute | Description | -| ------------- | ----------------------------------------------------- | -| Meaning | The maximum length for wildcard string used with LIKE | -| Unit | bytes | -| Value Range | 0-16384 | -| Default Value | 100 | -| Note | From version 2.1.6.1 | +### smlChildTableName -### clientMerge +| Attribute | Description | +| -------- | ------------------------- | +| Applicable | Client only | +| Meaning | Custom subtable name for schemaless writes | +| Type | String | +| Default Value | None | -| Attribute | Description | -| ------------- | --------------------------------------------------- | -| Meaning | Whether to filter out duplicate data on client side | -| Value Range | 0: false; 1: true | -| Default Value | 0 | -| Note | From version 2.3.0.0 | +### smlTagName -### maxRegexStringLen +| Attribute | Description | +| -------- | ------------------------------------ | +| Applicable | Client only | +| Meaning | Default tag for schemaless writes without tag value specified | +| Type | String | +| Default Value | _tag_null | + +### smlDataFormat | Attribute | Description | -| ------------- | ------------------------------------ | -| Meaning | Maximum length of regular expression | -| Value Range | [128, 16384] | -| Default Value | 128 | -| Note | From version 2.3.0.0 | +| -------- | ----------------------------- | +| Applicable | Client only | +| Meaning | Whether schemaless columns are consistently ordered | +| Value Range | 0: not consistent; 1: consistent. | +| Default | 1 | ## Other Parameters ### enableCoreFile -| Attribute | Description | -| ------------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------- | +| Attribute | Description | +| -------- | ------------------------------------------------------------------------------------------------------------------------------------------ | | Applicable | Server and Client | | Meaning | Whether to generate core file when server crashes | | Value Range | 0: false, 1: true | | Default Value | 1 | | Note | The core file is generated under root directory `systemctl start taosd` is used to start, or under the working directory if `taosd` is started directly on Linux Shell. | + +### udf + +| Attribute | Description | +| -------- | ------------------ | +| Applicable | Server Only | +| Meaning | Whether the UDF service is enabled | +| Value Range | 0: disable UDF; 1: enabled UDF | +| Default Value | 1 | + +## Parameter Comparison of TDengine 2.x and 3.0 +| # | **Parameter** | **In 2.x** | **In 3.0** | +| --- | :-----------------: | --------------- | --------------- | +| 1 | firstEp | Yes | Yes | +| 2 | secondEp | Yes | Yes | +| 3 | fqdn | Yes | Yes | +| 4 | serverPort | Yes | Yes | +| 5 | maxShellConns | Yes | Yes | +| 6 | monitor | Yes | Yes | +| 7 | monitorFqdn | No | Yes | +| 8 | monitorPort | No | Yes | +| 9 | monitorInterval | Yes | Yes | +| 10 | monitorMaxLogs | No | Yes | +| 11 | monitorComp | No | Yes | +| 12 | telemetryReporting | Yes | Yes | +| 13 | telemetryInterval | No | Yes | +| 14 | telemetryServer | No | Yes | +| 15 | telemetryPort | No | Yes | +| 16 | queryPolicy | No | Yes | +| 17 | querySmaOptimize | No | Yes | +| 18 | queryBufferSize | Yes | Yes | +| 19 | maxNumOfDistinctRes | Yes | Yes | +| 20 | minSlidingTime | Yes | Yes | +| 21 | minIntervalTime | Yes | Yes | +| 22 | countAlwaysReturnValue | Yes | Yes | +| 23 | dataDir | Yes | Yes | +| 24 | minimalDataDirGB | Yes | Yes | +| 25 | supportVnodes | No | Yes | +| 26 | tempDir | Yes | Yes | +| 27 | minimalTmpDirGB | Yes | Yes | +| 28 | compressMsgSize | Yes | Yes | +| 29 | compressColData | Yes | Yes | +| 30 | smlChildTableName | Yes | Yes | +| 31 | smlTagName | Yes | Yes | +| 32 | smlDataFormat | No | Yes | +| 33 | statusInterval | Yes | Yes | +| 34 | shellActivityTimer | Yes | Yes | +| 35 | transPullupInterval | No | Yes | +| 36 | mqRebalanceInterval | No | Yes | +| 37 | ttlUnit | No | Yes | +| 38 | ttlPushInterval | No | Yes | +| 39 | numOfTaskQueueThreads | No | Yes | +| 40 | numOfRpcThreads | No | Yes | +| 41 | numOfCommitThreads | Yes | Yes | +| 42 | numOfMnodeReadThreads | No | Yes | +| 43 | numOfVnodeQueryThreads | No | Yes | +| 44 | numOfVnodeStreamThreads | No | Yes | +| 45 | numOfVnodeFetchThreads | No | Yes | +| 46 | numOfVnodeWriteThreads | No | Yes | +| 47 | numOfVnodeSyncThreads | No | Yes | +| 48 | numOfQnodeQueryThreads | No | Yes | +| 49 | numOfQnodeFetchThreads | No | Yes | +| 50 | numOfSnodeSharedThreads | No | Yes | +| 51 | numOfSnodeUniqueThreads | No | Yes | +| 52 | rpcQueueMemoryAllowed | No | Yes | +| 53 | logDir | Yes | Yes | +| 54 | minimalLogDirGB | Yes | Yes | +| 55 | numOfLogLines | Yes | Yes | +| 56 | asyncLog | Yes | Yes | +| 57 | logKeepDays | Yes | Yes | +| 58 | debugFlag | Yes | Yes | +| 59 | tmrDebugFlag | Yes | Yes | +| 60 | uDebugFlag | Yes | Yes | +| 61 | rpcDebugFlag | Yes | Yes | +| 62 | jniDebugFlag | Yes | Yes | +| 63 | qDebugFlag | Yes | Yes | +| 64 | cDebugFlag | Yes | Yes | +| 65 | dDebugFlag | Yes | Yes | +| 66 | vDebugFlag | Yes | Yes | +| 67 | mDebugFlag | Yes | Yes | +| 68 | wDebugFlag | Yes | Yes | +| 69 | sDebugFlag | Yes | Yes | +| 70 | tsdbDebugFlag | Yes | Yes | +| 71 | tqDebugFlag | No | Yes | +| 72 | fsDebugFlag | Yes | Yes | +| 73 | udfDebugFlag | No | Yes | +| 74 | smaDebugFlag | No | Yes | +| 75 | idxDebugFlag | No | Yes | +| 76 | tdbDebugFlag | No | Yes | +| 77 | metaDebugFlag | No | Yes | +| 78 | timezone | Yes | Yes | +| 79 | locale | Yes | Yes | +| 80 | charset | Yes | Yes | +| 81 | udf | Yes | Yes | +| 82 | enableCoreFile | Yes | Yes | +| 83 | arbitrator | Yes | No | +| 84 | numOfThreadsPerCore | Yes | No | +| 85 | numOfMnodes | Yes | No | +| 86 | vnodeBak | Yes | No | +| 87 | balance | Yes | No | +| 88 | balanceInterval | Yes | No | +| 89 | offlineThreshold | Yes | No | +| 90 | role | Yes | No | +| 91 | dnodeNopLoop | Yes | No | +| 92 | keepTimeOffset | Yes | No | +| 93 | rpcTimer | Yes | No | +| 94 | rpcMaxTime | Yes | No | +| 95 | rpcForceTcp | Yes | No | +| 96 | tcpConnTimeout | Yes | No | +| 97 | syncCheckInterval | Yes | No | +| 98 | maxTmrCtrl | Yes | No | +| 99 | monitorReplica | Yes | No | +| 100 | smlTagNullName | Yes | No | +| 101 | keepColumnName | Yes | No | +| 102 | ratioOfQueryCores | Yes | No | +| 103 | maxStreamCompDelay | Yes | No | +| 104 | maxFirstStreamCompDelay | Yes | No | +| 105 | retryStreamCompDelay | Yes | No | +| 106 | streamCompDelayRatio | Yes | No | +| 107 | maxVgroupsPerDb | Yes | No | +| 108 | maxTablesPerVnode | Yes | No | +| 109 | minTablesPerVnode | Yes | No | +| 110 | tableIncStepPerVnode | Yes | No | +| 111 | cache | Yes | No | +| 112 | blocks | Yes | No | +| 113 | days | Yes | No | +| 114 | keep | Yes | No | +| 115 | minRows | Yes | No | +| 116 | maxRows | Yes | No | +| 117 | quorum | Yes | No | +| 118 | comp | Yes | No | +| 119 | walLevel | Yes | No | +| 120 | fsync | Yes | No | +| 121 | replica | Yes | No | +| 122 | partitions | Yes | No | +| 123 | quorum | Yes | No | +| 124 | update | Yes | No | +| 125 | cachelast | Yes | No | +| 126 | maxSQLLength | Yes | No | +| 127 | maxWildCardsLength | Yes | No | +| 128 | maxRegexStringLen | Yes | No | +| 129 | maxNumOfOrderedRes | Yes | No | +| 130 | maxConnections | Yes | No | +| 131 | mnodeEqualVnodeNum | Yes | No | +| 132 | http | Yes | No | +| 133 | httpEnableRecordSql | Yes | No | +| 134 | httpMaxThreads | Yes | No | +| 135 | restfulRowLimit | Yes | No | +| 136 | httpDbNameMandatory | Yes | No | +| 137 | httpKeepAlive | Yes | No | +| 138 | enableRecordSql | Yes | No | +| 139 | maxBinaryDisplayWidth | Yes | No | +| 140 | stream | Yes | No | +| 141 | retrieveBlockingModel | Yes | No | +| 142 | tsdbMetaCompactRatio | Yes | No | +| 143 | defaultJSONStrType | Yes | No | +| 144 | walFlushSize | Yes | No | +| 145 | keepTimeOffset | Yes | No | +| 146 | flowctrl | Yes | No | +| 147 | slaveQuery | Yes | No | +| 148 | adjustMaster | Yes | No | +| 149 | topicBinaryLen | Yes | No | +| 150 | telegrafUseFieldNum | Yes | No | +| 151 | deadLockKillQuery | Yes | No | +| 152 | clientMerge | Yes | No | +| 153 | sdbDebugFlag | Yes | No | +| 154 | odbcDebugFlag | Yes | No | +| 155 | httpDebugFlag | Yes | No | +| 156 | monDebugFlag | Yes | No | +| 157 | cqDebugFlag | Yes | No | +| 158 | shortcutFlag | Yes | No | +| 159 | probeSeconds | Yes | No | +| 160 | probeKillSeconds | Yes | No | +| 161 | probeInterval | Yes | No | +| 162 | lossyColumns | Yes | No | +| 163 | fPrecision | Yes | No | +| 164 | dPrecision | Yes | No | +| 165 | maxRange | Yes | No | +| 166 | range | Yes | No |