# Service deployment

PaddleOCR provides 2 service deployment methods:：
- Based on **HubServing**：Has been integrated into PaddleOCR ([code](https://github.com/PaddlePaddle/PaddleOCR/tree/develop/deploy/hubserving)). Please follow this tutorial.
- Based on **PaddleServing**：See PaddleServing official website for details ([demo](https://github.com/PaddlePaddle/Serving/tree/develop/python/examples/ocr)). Follow-up will also be integrated into PaddleOCR.  

The service deployment directory includes three service packages: detection, recognition, and two-stage series connection. Select the corresponding service package to install and start service according to your needs. The directory is as follows:  
```
deploy/hubserving/
  └─  ocr_det     detection module service package
  └─  ocr_rec     recognition module service package
  └─  ocr_system  two-stage series connection service package
```

Each service pack contains 3 files. Take the 2-stage series connection service package as an example, the directory is as follows:  
```
deploy/hubserving/ocr_system/
  └─  __init__.py    Empty file, required
  └─  config.json    Configuration file, optional, passed in as a parameter when using configuration to start the service
  └─  module.py      Main module file, required, contains the complete logic of the service
  └─  params.py      Parameter file, required, including parameters such as model path, pre- and post-processing parameters
```

## Quick start service
The following steps take the 2-stage series service as an example. If only the detection service or recognition service is needed, replace the corresponding file path.

### 1. Prepare the environment
```shell
# Install paddlehub  
pip3 install paddlehub --upgrade -i https://pypi.tuna.tsinghua.edu.cn/simple

# Set environment variables on Linux
export PYTHONPATH=.
# Set environment variables on Windows
SET PYTHONPATH=.
```

### 2. Install Service Module
PaddleOCR provides 3 kinds of service modules, install the required modules according to your needs.

* On Linux platform, the examples are as follows.

Install the detection service module:
```shell
hub install deploy/hubserving/ocr_det/
```
Or, install the recognition service module:
```shell
hub install deploy/hubserving/ocr_rec/
```
Or, install the 2-stage series service module:
```shell
hub install deploy/hubserving/ocr_system/
```
* On Windows platform, the examples are as follows.

Install the detection service module:
```shell
hub install deploy\hubserving\ocr_det\
```  
Or, install the recognition service module:
```shell
hub install deploy\hubserving\ocr_rec\
```  
Or, install the 2-stage series service module:
```shell
hub install deploy\hubserving\ocr_system\
```

### 3. Start service
#### Way 1. Start with command line parameters (CPU only)

**start command：**  
```shell
$ hub serving start --modules [Module1==Version1, Module2==Version2, ...] \
                    --port XXXX \
                    --use_multiprocess \
                    --workers \
```  
**parameters：**  

|parameters|usage|  
|-|-|  
|--modules/-m|PaddleHub Serving pre-installed model, listed in the form of multiple Module==Version key-value pairs<br>*`When Version is not specified, the latest version is selected by default`*|
|--port/-p|Service port, default is 8866|  
|--use_multiprocess|Enable concurrent mode, the default is single-process mode, this mode is recommended for multi-core CPU machines<br>*`Windows operating system only supports single-process mode`*|
|--workers|The number of concurrent tasks specified in concurrent mode, the default is `2*cpu_count-1`, where `cpu_count` is the number of CPU cores|  

For example, start the 2-stage series service:  
```shell
hub serving start -m ocr_system
```  

This completes the deployment of a service API, using the default port number 8866.  

#### Way 2. Start with configuration file（CPU、GPU）
**start command：**  
```shell
hub serving start --config/-c config.json
```  
Wherein, the format of `config.json` is as follows:
```python
{
    "modules_info": {
        "ocr_system": {
            "init_args": {
                "version": "1.0.0",
                "use_gpu": true
            },
            "predict_args": {
            }
        }
    },
    "port": 8868,
    "use_multiprocess": false,
    "workers": 2
}
```
- The configurable parameters in `init_args` are consistent with the `_initialize` function interface in `module.py`. Among them, **when `use_gpu` is `true`, it means that the GPU is used to start the service**.
- The configurable parameters in `predict_args` are consistent with the `predict` function interface in `module.py`.

**Note:**  
- When using the configuration file to start the service, other parameters will be ignored.
- If you use GPU prediction (that is, `use_gpu` is set to `true`), you need to set the environment variable CUDA_VISIBLE_DEVICES before starting the service, such as: ```export CUDA_VISIBLE_DEVICES=0```, otherwise you do not need to set it.
- **`use_gpu` and `use_multiprocess` cannot be `true` at the same time.**  

For example, use GPU card No. 3 to start the 2-stage series service:
```shell
export CUDA_VISIBLE_DEVICES=3
hub serving start -c deploy/hubserving/ocr_system/config.json
```  

## Send prediction requests
After the service starts, you can use the following command to send a prediction request to obtain the prediction result:  
```shell
python tools/test_hubserving.py server_url image_path
```  

Two parameters need to be passed to the script:
- **server_url**：service address，format of which is
`http://[ip_address]:[port]/predict/[module_name]`  
For example, if the detection, recognition and 2-stage serial services are started with provided configuration files, the respective `server_url` would be:  
`http://127.0.0.1:8866/predict/ocr_det`  
`http://127.0.0.1:8867/predict/ocr_rec`  
`http://127.0.0.1:8868/predict/ocr_system`  
- **image_path**：Test image path, can be a single image path or an image directory path

**Eg.**
```shell
python tools/test_hubserving.py http://127.0.0.1:8868/predict/ocr_system ./doc/imgs/
```

## Returned result format
The returned result is a list. Each item in the list is a dict. The dict may contain three fields. The information is as follows:

|field name|data type|description|
|-|-|-|
|text|str|text content|
|confidence|float|text recognition confidence|
|text_region|list|text location coordinates|

The fields returned by different modules are different. For example, the results returned by the text recognition service module do not contain `text_region`. The details are as follows:

|field name/module name|ocr_det|ocr_rec|ocr_system|
|-|-|-|-|  
|text||✔|✔|
|confidence||✔|✔|
|text_region|✔||✔|

**Note：** If you need to add, delete or modify the returned fields, you can modify the file `module.py` of the corresponding module. For the complete process, refer to the user-defined modification service module in the next section.

## User defined service module modification
If you need to modify the service logic, the following steps are generally required (take the modification of `ocr_system` for example):

- 1. Stop service
```shell
hub serving stop --port/-p XXXX
```
- 2. Modify the code in the corresponding files, like `module.py` and `params.py`, according to the actual needs.  
For example, if you need to replace the model used by the deployed service, you need to modify model path parameters `det_model_dir` and `rec_model_dir` in `params.py`. Of course, other related parameters may need to be modified at the same time. Please modify and debug according to the actual situation. It is suggested to run `module.py` directly for debugging after modification before starting the service test.  
- 3. Uninstall old service module
```shell
hub uninstall ocr_system
```
- 4. Install modified service module
```shell
hub install deploy/hubserving/ocr_system/
```
- 5. Restart service
```shell
hub serving start -m ocr_system
```