## TEXT RECOGNITION ### DATA PREPARATION PaddleOCR supports two data formats: `LMDB` is used to train public data and evaluation algorithms; `general data` is used to train your own data: Please organize the dataset as follows: The default storage path for training data is `PaddleOCR/train_data`, if you already have a dataset on your disk, just create a soft link to the dataset directory: ``` ln -sf /train_data/dataset ``` * Dataset download If you do not have a dataset locally, you can download it on the official website [icdar2015](http://rrc.cvc.uab.es/?ch=4&com=downloads). Also refer to [DTRB](https://github.com/clovaai/deep-text-recognition-benchmark#download-lmdb-dataset-for-traininig-and-evaluation-from-here)，download the lmdb format dataset required for benchmark If you want to reproduce the paper indicators of SRN, you need to download offline [augmented data](https://pan.baidu.com/s/1-HSZ-ZVdqBF2HaBZ5pRAKA), extraction code: y3ry. The augmented data is obtained by rotation and perturbation of mjsynth and synthtext. Please unzip the data to {your_path}/PaddleOCR/train_data/data_lmdb_Release/training/path. * Use your own dataset: If you want to use your own data for training, please refer to the following to organize your data. - Training set First put the training images in the same folder (train_images), and use a txt file (rec_gt_train.txt) to store the image path and label. * Note: by default, the image path and image label are split with \t, if you use other methods to split, it will cause training error ``` " Image file name Image annotation " train_data/train_0001.jpg 简单可依赖 train_data/train_0002.jpg 用科技让复杂的世界更简单 ``` PaddleOCR provides label files for training the icdar2015 dataset, which can be downloaded in the following ways: ``` # Training set label wget -P ./train_data/ic15_data https://paddleocr.bj.bcebos.com/dataset/rec_gt_train.txt # Test Set Label wget -P ./train_data/ic15_data https://paddleocr.bj.bcebos.com/dataset/rec_gt_test.txt ``` The final training set should have the following file structure: ``` |-train_data |-ic15_data |- rec_gt_train.txt |- train |- word_001.png |- word_002.jpg |- word_003.jpg | ... ``` - Test set Similar to the training set, the test set also needs to be provided a folder containing all images (test) and a rec_gt_test.txt. The structure of the test set is as follows: ``` |-train_data |-ic15_data |- rec_gt_test.txt |- test |- word_001.jpg |- word_002.jpg |- word_003.jpg | ... ``` - Dictionary Finally, a dictionary ({word_dict_name}.txt) needs to be provided so that when the model is trained, all the characters that appear can be mapped to the dictionary index. Therefore, the dictionary needs to contain all the characters that you want to be recognized correctly. {word_dict_name}.txt needs to be written in the following format and saved in the `utf-8` encoding format: ``` l d a d r n ``` In `word_dict.txt`, there is a single word in each line, which maps characters and numeric indexes together, e.g "and" will be mapped to [2 5 1] `ppocr/utils/ppocr_keys_v1.txt` is a Chinese dictionary with 6623 characters. `ppocr/utils/ic15_dict.txt` is an English dictionary with 63 characters `ppocr/utils/french_dict.txt` is a French dictionary with 118 characters `ppocr/utils/japan_dict.txt` is a French dictionary with 4399 characters `ppocr/utils/korean_dict.txt` is a French dictionary with 3636 characters `ppocr/utils/german_dict.txt` is a French dictionary with 131 characters You can use it on demand. The current multi-language model is still in the demo stage and will continue to optimize the model and add languages. **You are very welcome to provide us with dictionaries and fonts in other languages**, If you like, you can submit the dictionary file to [utils](../../ppocr/utils) and we will thank you in the Repo. To customize the dict file, please modify the `character_dict_path` field in `configs/rec/rec_icdar15_train.yml` and set `character_type` to `ch`. - Custom dictionary If you need to customize dic file, please add character_dict_path field in configs/rec/rec_icdar15_train.yml to point to your dictionary path. And set character_type to ch. - Add space category If you want to support the recognition of the `space` category, please set the `use_space_char` field in the yml file to `true`. **Note: use_space_char only takes effect when character_type=ch** ### TRAINING PaddleOCR provides training scripts, evaluation scripts, and prediction scripts. In this section, the CRNN recognition model will be used as an example: First download the pretrain model, you can download the trained model to finetune on the icdar2015 data: ``` cd PaddleOCR/ # Download the pre-trained model of MobileNetV3 wget -P ./pretrain_models/ https://paddleocr.bj.bcebos.com/rec_mv3_none_bilstm_ctc.tar # Decompress model parameters cd pretrain_models tar -xf rec_mv3_none_bilstm_ctc.tar && rm -rf rec_mv3_none_bilstm_ctc.tar ``` Start training: ``` # GPU training Support single card and multi-card training, specify the card number through CUDA_VISIBLE_DEVICES export CUDA_VISIBLE_DEVICES=0,1,2,3 # Training icdar15 English data and saving the log as train_rec.log python3 tools/train.py -c configs/rec/rec_icdar15_train.yml 2>&1 | tee train_rec.log ``` - Data Augmentation PaddleOCR provides a variety of data augmentation methods. If you want to add disturbance during training, please set `distort: true` in the configuration file. The default perturbation methods are: cvtColor, blur, jitter, Gasuss noise, random crop, perspective, color reverse. Each disturbance method is selected with a 50% probability during the training process. For specific code implementation, please refer to: [img_tools.py](https://github.com/PaddlePaddle/PaddleOCR/blob/develop/ppocr/data/rec/img_tools.py) - Training PaddleOCR supports alternating training and evaluation. You can modify `eval_batch_step` in `configs/rec/rec_icdar15_train.yml` to set the evaluation frequency. By default, it is evaluated every 500 iter and the best acc model is saved under `output/rec_CRNN/best_accuracy` during the evaluation process. If the evaluation set is large, the test will be time-consuming. It is recommended to reduce the number of evaluations, or evaluate after training. * Tip: You can use the `-c` parameter to select multiple model configurations under the `configs/rec/` path for training. The recognition algorithms supported by PaddleOCR are: | Configuration file | Algorithm | backbone | trans | seq | pred | | :--------: | :-------: | :-------: | :-------: | :-----: | :-----: | | [rec_chinese_lite_train_v1.1.yml](../../configs/rec/ch_ppocr_v1.1/rec_chinese_lite_train_v1.1.yml) | CRNN | Mobilenet_v3 small 0.5 | None | BiLSTM | ctc | | [rec_chinese_common_train_v1.1.yml](../../configs/rec/ch_ppocr_v1.1/rec_chinese_common_train_v1.1.yml) | CRNN | ResNet34_vd | None | BiLSTM | ctc | | rec_chinese_lite_train.yml | CRNN | Mobilenet_v3 small 0.5 | None | BiLSTM | ctc | | rec_chinese_common_train.yml | CRNN | ResNet34_vd | None | BiLSTM | ctc | | rec_icdar15_train.yml | CRNN | Mobilenet_v3 large 0.5 | None | BiLSTM | ctc | | rec_mv3_none_bilstm_ctc.yml | CRNN | Mobilenet_v3 large 0.5 | None | BiLSTM | ctc | | rec_mv3_none_none_ctc.yml | Rosetta | Mobilenet_v3 large 0.5 | None | None | ctc | | rec_mv3_tps_bilstm_ctc.yml | STARNet | Mobilenet_v3 large 0.5 | tps | BiLSTM | ctc | | rec_mv3_tps_bilstm_attn.yml | RARE | Mobilenet_v3 large 0.5 | tps | BiLSTM | attention | | rec_r34_vd_none_bilstm_ctc.yml | CRNN | Resnet34_vd | None | BiLSTM | ctc | | rec_r34_vd_none_none_ctc.yml | Rosetta | Resnet34_vd | None | None | ctc | | rec_r34_vd_tps_bilstm_attn.yml | RARE | Resnet34_vd | tps | BiLSTM | attention | | rec_r34_vd_tps_bilstm_ctc.yml | STARNet | Resnet34_vd | tps | BiLSTM | ctc | For training Chinese data, it is recommended to use 训练中文数据，推荐使用[rec_chinese_lite_train_v1.1.yml](../../configs/rec/ch_ppocr_v1.1/rec_chinese_lite_train_v1.1.yml). If you want to try the result of other algorithms on the Chinese data set, please refer to the following instructions to modify the configuration file: co Take `rec_mv3_none_none_ctc.yml` as an example: ``` Global: ... # Modify image_shape to fit long text image_shape: [3, 32, 320] ... # Modify character type character_type: ch # Add a custom dictionary, such as modify the dictionary, please point the path to the new dictionary character_dict_path: ./ppocr/utils/ppocr_keys_v1.txt ... # Modify reader type reader_yml: ./configs/rec/rec_chinese_reader.yml # Whether to use data augmentation distort: true # Whether to recognize spaces use_space_char: true ... ... Optimizer: ... # Add learning rate decay strategy decay: function: cosine_decay # Each epoch contains iter number step_each_epoch: 20 # Total epoch number total_epoch: 1000 ``` **Note that the configuration file for prediction/evaluation must be consistent with the training.** -Minor language PaddleOCR also provides multi-language. The configuration file in `configs/rec/multi_languages` provides multi-language configuration files. Currently, the multi-language algorithms supported by PaddleOCR are: | Configuration file | Algorithm name | backbone | trans | seq | pred | language ｜ | :--------: | :-------: | :-------: | :-------: | :-----: | :-----: | :-----: | | rec_en_lite_train.yml | CRNN | Mobilenet_v3 small 0.5 | None | BiLSTM | ctc | English ｜ | rec_french_lite_train.yml | CRNN | Mobilenet_v3 small 0.5 | None | BiLSTM | ctc | French ｜ | rec_ger_lite_train.yml | CRNN | Mobilenet_v3 small 0.5 | None | BiLSTM | ctc | German ｜ | rec_japan_lite_train.yml | CRNN | Mobilenet_v3 small 0.5 | None | BiLSTM | ctc | Japanese ｜ | rec_korean_lite_train.yml | CRNN | Mobilenet_v3 small 0.5 | None | BiLSTM | ctc | Korean ｜ The multi-language model training method is the same as the Chinese model. The training data set is 100w synthetic data. A small amount of fonts and test data can be downloaded on [Baidu Netdisk](https://pan.baidu.com/s/1bS_u207Rm7YbY33wOECKDA),Extraction code:frgi. If you want to finetune on the basis of the existing model effect, please refer to the following instructions to modify the configuration file: Take `rec_french_lite_train` as an example: ``` Global: ... # Add a custom dictionary, if you modify the dictionary # please point the path to the new dictionary character_dict_path: ./ppocr/utils/french_dict.txt # Add data augmentation during training distort: true # Identify spaces use_space_char: true ... # Modify reader type reader_yml: ./configs/rec/multi_languages/rec_french_reader.yml ... ... ``` ### EVALUATION The evaluation data set can be modified via `configs/rec/rec_icdar15_reader.yml` setting of `label_file_path` in EvalReader. ``` export CUDA_VISIBLE_DEVICES=0 # GPU evaluation, Global.checkpoints is the weight to be tested python3 tools/eval.py -c configs/rec/rec_icdar15_reader.yml -o Global.checkpoints={path/to/weights}/best_accuracy ``` ### PREDICTION * Training engine prediction Using the model trained by paddleocr, you can quickly get prediction through the following script. The default prediction picture is stored in `infer_img`, and the weight is specified via `-o Global.checkpoints`: ``` # Predict English results python3 tools/infer_rec.py -c configs/rec/ch_ppocr_v1.1/rec_chinese_lite_train_v1.1.yml -o Global.checkpoints={path/to/weights}/best_accuracy TestReader.infer_img=doc/imgs_words/en/word_1.jpg ``` Input image: ![](../imgs_words/en/word_1.png) Get the prediction result of the input image: ``` infer_img: doc/imgs_words/en/word_1.png index: [19 24 18 23 29] word : joint ``` The configuration file used for prediction must be consistent with the training. For example, you completed the training of the Chinese model with `python3 tools/train.py -c configs/rec/ch_ppocr_v1.1/rec_chinese_lite_train_v1.1.yml`, you can use the following command to predict the Chinese model: ``` # Predict Chinese results python3 tools/infer_rec.py -c configs/rec/ch_ppocr_v1.1/rec_chinese_lite_train_v1.1.yml -o Global.checkpoints={path/to/weights}/best_accuracy TestReader.infer_img=doc/imgs_words/ch/word_1.jpg ``` Input image: ![](../imgs_words/ch/word_1.jpg) Get the prediction result of the input image: ``` infer_img: doc/imgs_words/ch/word_1.jpg index: [2092 177 312 2503] word : 韩国小馆 ```