/**************************************************************************//** * @file lcd.c * @brief N9H30 LCD driver source file * * @note * SPDX-License-Identifier: Apache-2.0 * Copyright (C) 2018 Nuvoton Technology Corp. All rights reserved. *****************************************************************************/ #include #include #include #include #include "N9H30.h" #include "nu_sys.h" #include "nu_lcd.h" /** @addtogroup N9H30_Device_Driver N9H30 Device Driver @{ */ /** @addtogroup N9H30_LCD_Driver LCD Driver @{ */ /** @addtogroup N9H30_LCD_EXPORTED_CONSTANTS LCD Exported Constants @{ */ /// @cond HIDDEN_SYMBOLS /* LCD attributes */ static VPOST_T DEF_E50A2V1 = { 800, /*!< Panel width */ 480, /*!< Panel height */ 0, /*!< MPU command line low indicator */ 0, /*!< MPU command width */ 0, /*!< MPU bus width */ VPOSTB_DATA16or18, /*!< Display bus width */ 0, /*!< MPU mode */ VPOSTB_COLORTYPE_64K, /*!< Display colors */ VPOSTB_DEVICE_SYNC_HIGHCOLOR, /*!< Type of display panel */ 0x020d03a0, /*!< CRTCSIZE register value */ 0x01e00320, /*!< CRTCDEND register value */ 0x03250321, /*!< CRTCHR register value */ 0x03780348, /*!< CRTCHSYNC register value */ 0x01f001ed /*!< CRTCVR register value */ }; static VPOST_T DEF_ILI9341_MPU80 = { 240, /*!< Panel width */ 320, /*!< Panel height */ VPOSTB_CMDLOW, /*!< MPU command line low indicator */ VPOSTB_CM16t18HIGH, /*!< MPU command width */ VPOSTB_CMD8, /*!< MPU bus width */ VPOSTB_DATA16or18, /*!< Display bus width */ VPOSTB_MPU80, /*!< MPU mode */ VPOSTB_COLORTYPE_64K, /*!< Display colors */ VPOSTB_DEVICE_MPU, /*!< Type of display panel */ 0x01600100, /*!< CRTCSIZE register value */ 0x014000F0, /*!< CRTCDEND register value */ 0x00FA00F5, /*!< CRTCHR register value */ 0x00FC00FA, /*!< CRTCHSYNC register value */ 0x01500145 /*!< CRTCVR register value */ }; static VPOST_T DEF_LSA40AT9001 = { 800, /*!< Panel width */ 600, /*!< Panel height */ 0, /*!< MPU command line low indicator */ 0, /*!< MPU command width */ 0, /*!< MPU bus width */ VPOSTB_DATA16or18, /*!< Display bus width */ 0, /*!< MPU mode */ VPOSTB_COLORTYPE_64K, /*!< Display colors */ VPOSTB_DEVICE_SYNC_HIGHCOLOR, /*!< Type of display panel */ 0x02800425, /*!< CRTCSIZE register value */ 0x02580320, /*!< CRTCDEND register value */ 0x032F032A, /*!< CRTCHR register value */ 0x0334032A, /*!< CRTCHSYNC register value */ 0x026C0262 /*!< CRTCVR register value */ }; static VPOST_T DEF_FW070TFT = { 800, /*!< Panel width */ 480, /*!< Panel height */ 0, /*!< MPU command line low indicator */ 0, /*!< MPU command width */ 0, /*!< MPU bus width */ VPOSTB_DATA16or18, /*!< Display bus width */ 0, /*!< MPU mode */ VPOSTB_COLORTYPE_16M, /*!< Display colors */ VPOSTB_DEVICE_SYNC_HIGHCOLOR, /*!< Type of display panel */ 0x020d0420, /*!< CRTCSIZE register value */ 0x01e00320, /*!< CRTCDEND register value */ 0x033e0339, /*!< CRTCHR register value */ 0x040c03f8, /*!< CRTCHSYNC register value */ 0x020001f6 /*!< CRTCVR register value */ }; #define FW043TFT_WIDTH 480 /*!< XRES */ #define FW043TFT_HEIGHT 272 /*!< YRES */ #define FW043TFT_MARGIN_LEFT 30 /*!< HBP (Horizontal Back Porch) */ #define FW043TFT_MARGIN_RIGHT 5 /*!< HFP (Horizontal Front Porch) */ #define FW043TFT_MARGIN_UPPER 2 /*!< VBP (Vertical Back Porch) */ #define FW043TFT_MARGIN_LOWER 27 /*!< VFP (Vertical Front Porch) */ #define FW043TFT_HSYNC_LEN 41 /*!< HPW (HSYNC plus width) */ #define FW043TFT_VSYNC_LEN 10 /*!< VPW (VSYNC width) */ static VPOST_T DEF_FW043TFT = { FW043TFT_WIDTH, /*!< Panel width */ FW043TFT_HEIGHT, /*!< Panel height */ 0, /*!< MPU command line low indicator */ 0, /*!< MPU command width */ 0, /*!< MPU bus width */ VPOSTB_DATA16or18, /*!< Display bus width */ 0, /*!< MPU mode */ VPOSTB_COLORTYPE_16M, /*!< Display colors */ VPOSTB_DEVICE_SYNC_HIGHCOLOR, /*!< Type of display panel */ .sCRTCSIZE = { /*!< Horizontal Total */ .HTT = FW043TFT_MARGIN_LEFT + FW043TFT_WIDTH + FW043TFT_MARGIN_RIGHT, /*!< Vertical Total */ .VTT = FW043TFT_MARGIN_UPPER + FW043TFT_HEIGHT + FW043TFT_MARGIN_LOWER, }, .sCRTCDEND = { /*!< Horizontal Display Enable End */ .HDEND = FW043TFT_WIDTH, /*!< Vertical Display Enable End */ .VDEND = FW043TFT_HEIGHT, }, .sCRTCHR = { /*!< Internal Horizontal Retrace Start Timing */ .HRS = FW043TFT_WIDTH + 1, /*!< Internal Horizontal Retrace End Low */ .HRE = FW043TFT_WIDTH + 5, }, .sCRTCHSYNC = { /*!< Horizontal Sync Start Timing */ .HSYNC_S = FW043TFT_WIDTH + FW043TFT_MARGIN_LEFT, /*!< Horizontal Sync End Timing */ .HSYNC_E = FW043TFT_WIDTH + FW043TFT_MARGIN_LEFT + FW043TFT_HSYNC_LEN, /*!< Hsync Signal Adjustment For Multi-Cycles Per Pixel Mode Of Sync-Based Unipac-LCD */ .HSYNC_SHIFT = 0, }, .sCRTCVR = { /*!< Vertical Internal Retrace Start Timing */ .VRS = FW043TFT_HEIGHT + FW043TFT_MARGIN_UPPER, /*!< Vertical Internal Retrace End Low */ .VRE = FW043TFT_HEIGHT + FW043TFT_MARGIN_UPPER + FW043TFT_VSYNC_LEN, } }; #define FW070TFT_WSVGA_WIDTH 1024 /*!< XRES */ #define FW070TFT_WSVGA_HEIGHT 600 /*!< YRES */ #define FW070TFT_WSVGA_MARGIN_LEFT 160 /*!< HBP (Horizontal Back Porch) */ #define FW070TFT_WSVGA_MARGIN_RIGHT 160 /*!< HFP (Horizontal Front Porch) */ #define FW070TFT_WSVGA_MARGIN_UPPER 12 /*!< VBP (Vertical Back Porch) */ #define FW070TFT_WSVGA_MARGIN_LOWER 23 /*!< VFP (Vertical Front Porch) */ #define FW070TFT_WSVGA_HSYNC_LEN 1 /*!< HPW (HSYNC plus width) */ #define FW070TFT_WSVGA_VSYNC_LEN 1 /*!< VPW (VSYNC width) */ static VPOST_T DEF_FW070TFT_WSVGA = { FW070TFT_WSVGA_WIDTH, /*!< Panel width */ FW070TFT_WSVGA_HEIGHT, /*!< Panel height */ 0, /*!< MPU command line low indicator */ 0, /*!< MPU command width */ 0, /*!< MPU bus width */ VPOSTB_DATA16or18, /*!< Display bus width */ 0, /*!< MPU mode */ VPOSTB_COLORTYPE_16M, /*!< Display colors */ VPOSTB_DEVICE_SYNC_HIGHCOLOR, /*!< Type of display panel */ .sCRTCSIZE = { /*!< Horizontal Total */ .HTT = FW070TFT_WSVGA_MARGIN_LEFT + FW070TFT_WSVGA_WIDTH + FW070TFT_WSVGA_MARGIN_RIGHT, /*!< Vertical Total */ .VTT = FW070TFT_WSVGA_MARGIN_UPPER + FW070TFT_WSVGA_HEIGHT + FW070TFT_WSVGA_MARGIN_LOWER, }, .sCRTCDEND = { /*!< Horizontal Display Enable End */ .HDEND = FW070TFT_WSVGA_WIDTH, /*!< Vertical Display Enable End */ .VDEND = FW070TFT_WSVGA_HEIGHT, }, .sCRTCHR = { /*!< Internal Horizontal Retrace Start Timing */ .HRS = FW070TFT_WSVGA_WIDTH + 1, /*!< Internal Horizontal Retrace End Low */ .HRE = FW070TFT_WSVGA_WIDTH + 5, }, .sCRTCHSYNC = { /*!< Horizontal Sync Start Timing */ .HSYNC_S = FW070TFT_WSVGA_WIDTH + FW070TFT_WSVGA_MARGIN_LEFT, /*!< Horizontal Sync End Timing */ .HSYNC_E = FW070TFT_WSVGA_WIDTH + FW070TFT_WSVGA_MARGIN_LEFT + FW070TFT_WSVGA_HSYNC_LEN, /*!< Hsync Signal Adjustment For Multi-Cycles Per Pixel Mode Of Sync-Based Unipac-LCD */ .HSYNC_SHIFT = 0, }, .sCRTCVR = { /*!< Vertical Internal Retrace Start Timing */ .VRS = FW070TFT_WSVGA_HEIGHT + FW070TFT_WSVGA_MARGIN_UPPER, /*!< Vertical Internal Retrace End Low */ .VRE = FW070TFT_WSVGA_HEIGHT + FW070TFT_WSVGA_MARGIN_UPPER + FW070TFT_WSVGA_VSYNC_LEN, } }; /* LCD build-in support list */ static VPOST_T *DisplayDevList[DIS_PANEL_CNT] = { &DEF_E50A2V1, &DEF_ILI9341_MPU80, &DEF_LSA40AT9001, &DEF_FW070TFT, &DEF_FW043TFT, &DEF_FW070TFT_WSVGA }; static VPOST_T curDisplayDev; static OSDFORMATEX curOSDDev = {0}; static LCDFORMATEX curVADev = {0}; /// @endcond /* HIDDEN_SYMBOLS */ /*@}*/ /* end of group N9H30_I2C_EXPORTED_CONSTANTS */ /** @addtogroup N9H30_LCD_EXPORTED_FUNCTIONS LCD Exported Functions @{ */ /// @cond HIDDEN_SYMBOLS /* For align 32 */ static uint32_t shift_pointer(uint32_t ptr, uint32_t align) { uint32_t alignedPTR; uint32_t remain; //printf("pointer position is %x\n",ptr); if ((ptr % align) != 0) { remain = ptr % align; alignedPTR = ptr + (align - remain); return alignedPTR; } return ptr; } /// @endcond /* HIDDEN_SYMBOLS */ /** * @brief Configure attributes of LCD panel,install interrupt handler and enable LCD engine clock * @param[in] u32DisplayPanelID is panel id to configure. * @return none */ void vpostLCMInit(uint32_t u32DisplayPanelID) { // enable lcd engine clock outpw(REG_CLK_HCLKEN, inpw(REG_CLK_HCLKEN) | (1 << 25)); memset((void *)&curDisplayDev, 0, sizeof(curDisplayDev)); memcpy((void *)&curDisplayDev, DisplayDevList[u32DisplayPanelID], sizeof(curDisplayDev)); outpw(REG_LCM_DEV_CTRL, curDisplayDev.u32CmdLow | curDisplayDev.u32Cmd16t18 | curDisplayDev.u32CmdBusWidth | curDisplayDev.u32DataBusWidth | curDisplayDev.u32MPU_Mode | curDisplayDev.u32DisplayColors | curDisplayDev.u32DevType); outpw(REG_LCM_CRTC_SIZE, curDisplayDev.u32Reg_CRTCSIZE); outpw(REG_LCM_CRTC_DEND, curDisplayDev.u32Reg_CRTCDEND); outpw(REG_LCM_CRTC_HR, curDisplayDev.u32Reg_CRTCHR); outpw(REG_LCM_CRTC_HSYNC, curDisplayDev.u32Reg_CRTCHSYNC); outpw(REG_LCM_CRTC_VR, curDisplayDev.u32Reg_CRTCVR); } /** * @brief Query LCM capacity and configuration by ID * @param[in] u32DisplayPanelID is panel id to configure. * @return LCM instance */ VPOST_T *vpostLCMGetInstance(uint32_t u32DisplayPanelID) { if (u32DisplayPanelID > (sizeof(DisplayDevList) / sizeof(VPOST_T *))) return NULL; return DisplayDevList[u32DisplayPanelID]; } /** * @brief Disable LCD engine * @param none * @return none */ void vpostLCMDeinit(void) { // disable lcd engine clock outpw(REG_CLK_HCLKEN, inpw(REG_CLK_HCLKEN) & ~(1 << 25)); //sysDisableInterrupt(LCD_IRQn); } /** * @brief Get the pointer of frame buffer * @param none * @return pointer of frame buffer * @retval NULL fail. * @note before calling this function, display width, height and source format must be set first. */ uint8_t *vpostGetFrameBuffer(void) { uint8_t *u8BufPtr; uint8_t u32BytePerPixel; if ((curDisplayDev.u32DevWidth == 0) || (curDisplayDev.u32DevHeight == 0)) return NULL; switch (curVADev.ucVASrcFormat) { case VA_SRC_YUV422: case VA_SRC_YCBCR422: case VA_SRC_RGB565: u32BytePerPixel = 2; break; case VA_SRC_RGB666: case VA_SRC_RGB888: u32BytePerPixel = 4; break; default: u32BytePerPixel = 2; } u8BufPtr = (uint8_t *)malloc((curDisplayDev.u32DevWidth * curDisplayDev.u32DevHeight * u32BytePerPixel) + 32); if (u8BufPtr == NULL) return NULL; u8BufPtr = (uint8_t *)shift_pointer((uint32_t)u8BufPtr, 32); outpw(REG_LCM_VA_BADDR0, (uint32_t)((uint32_t)u8BufPtr | 0x80000000)); outpw(REG_LCM_VA_FBCTRL, inpw(REG_LCM_VA_FBCTRL) & ~(1 << 30) & ~VPOSTB_DB_EN); return (uint8_t *)((uint32_t)u8BufPtr | 0x80000000); } void vpostSetFrameBuffer(uint8_t *pu8BufPtr) { outpw(REG_LCM_VA_BADDR0, (uint32_t)((uint32_t)pu8BufPtr | 0x80000000)); outpw(REG_LCM_VA_FBCTRL, inpw(REG_LCM_VA_FBCTRL) & ~(1 << 30) & ~VPOSTB_DB_EN); } /** * @brief Get the pointer of frame buffer * @param[in] u32Cnt is the frame buffer count to allocate. Min value is 1. * @return pointer of frame buffer * @retval NULL fail. * @note before calling this function, display width, height and source format must be set first. */ uint8_t *vpostGetMultiFrameBuffer(uint32_t u32Cnt) { uint8_t *u8BufPtr; uint8_t u32BytePerPixel; if ((curDisplayDev.u32DevWidth == 0) || (curDisplayDev.u32DevHeight == 0) || (u32Cnt == 0)) return NULL; switch (curVADev.ucVASrcFormat) { case VA_SRC_YUV422: case VA_SRC_YCBCR422: case VA_SRC_RGB565: u32BytePerPixel = 2; break; case VA_SRC_RGB666: case VA_SRC_RGB888: u32BytePerPixel = 4; break; default: u32BytePerPixel = 2; } u8BufPtr = (uint8_t *)malloc((curDisplayDev.u32DevWidth * curDisplayDev.u32DevHeight * u32BytePerPixel) * u32Cnt + 32); if (u8BufPtr == NULL) return NULL; u8BufPtr = (uint8_t *)shift_pointer((uint32_t)u8BufPtr, 32); outpw(REG_LCM_VA_BADDR0, (uint32_t)((uint32_t)u8BufPtr | 0x80000000)); outpw(REG_LCM_VA_FBCTRL, inpw(REG_LCM_VA_FBCTRL) & ~(1 << 30) & ~VPOSTB_DB_EN); return (uint8_t *)((uint32_t)u8BufPtr | 0x80000000); } /** * @brief Set active display window * @param[in] u16StartY is y start position * @param[in] u16EndY is y end position * @param[in] u8BGColorR is background R color * @param[in] u8BGColorG is background G color * @param[in] u8BGColorB is background B color * @return none */ void vpostSetActiveWindow(uint16_t u16StartY, uint16_t u16EndY, uint8_t u8BGColorR, uint8_t u8BGColorG, uint8_t u8BGColorB) { outpw(REG_LCM_VA_WIN, (u16StartY << 16) | u16EndY); outpw(REG_LCM_VA_STUFF, (u8BGColorR << 16) | (u8BGColorG << 8) | u8BGColorB); } /** * @brief Configure LCD display mode * @param[in] u8DisplayMode is display mode, value could be * - \ref VPOST_DISPLAY_SINGLE * - \ref VPOST_DISPLAY_CONTINUOUS * @return none */ void vpostSetDisplayMode(uint8_t u8DisplayMode) { if (u8DisplayMode == 0) outpw(REG_LCM_DCCS, inpw(REG_LCM_DCCS) & ~(1 << 7)); //clear setting else outpw(REG_LCM_DCCS, inpw(REG_LCM_DCCS) | (u8DisplayMode) << 7); } /** * @brief Configure display attributes of video interface, * @param[in] u32VASrcType is display type, value could be * - \ref VA_SRC_YUV422 * - \ref VA_SRC_YCBCR422 * - \ref VA_SRC_RGB888 * - \ref VA_SRC_RGB666 * - \ref VA_SRC_RGB565 * - \ref VA_SRC_RGB444_LOW * - \ref VA_SRC_RGB444_HIGH * @return none */ void vpostSetVASrc(uint32_t u32VASrcType) { uint32_t u32BytePerPixel, VA_FF, VA_Sride; curVADev.ucVASrcFormat = u32VASrcType; outpw(REG_LCM_DCCS, inpw(REG_LCM_DCCS) & ~(7 << 8)); if (u32VASrcType != 0) outpw(REG_LCM_DCCS, inpw(REG_LCM_DCCS) | u32VASrcType); else outpw(REG_LCM_DCCS, inpw(REG_LCM_DCCS) & ~(7 << 8)); if ((u32VASrcType == VA_SRC_RGB888) || (u32VASrcType == VA_SRC_RGB666)) outpw(REG_LCM_VA_FBCTRL, inpw(REG_LCM_VA_FBCTRL) & ~0x7ff07ff | (curDisplayDev.u32DevWidth << 16) | curDisplayDev.u32DevWidth); else outpw(REG_LCM_VA_FBCTRL, inpw(REG_LCM_VA_FBCTRL) & ~0x7ff07ff | ((curDisplayDev.u32DevWidth / 2) << 16) | (curDisplayDev.u32DevWidth / 2)); switch (u32VASrcType) { case VA_SRC_YUV422: case VA_SRC_YCBCR422: case VA_SRC_RGB565: u32BytePerPixel = 2; break; case VA_SRC_RGB666: case VA_SRC_RGB888: u32BytePerPixel = 4; break; default: u32BytePerPixel = 2; } /* set video stream frame buffer control */ VA_FF = curDisplayDev.u32DevWidth * u32BytePerPixel / 4; VA_Sride = curDisplayDev.u32DevWidth * u32BytePerPixel / 4; outpw(REG_LCM_VA_FBCTRL, inpw(REG_LCM_VA_FBCTRL) & ~0x7ff07ff | (VA_FF << 16) | VA_Sride); } /** * @brief Start to display * @param none * @return none */ void vpostVAStartTrigger(void) { if ((inpw(REG_LCM_DCCS) & VPOSTB_SINGLE) == VPOSTB_SINGLE) while ((inpw(REG_LCM_DCCS) & VPOSTB_VA_EN) == VPOSTB_VA_EN); //wait VA_EN low outpw(REG_LCM_DCCS, inpw(REG_LCM_DCCS) | VPOSTB_DISP_OUT_EN); //display_out-enable outpw(REG_LCM_DCCS, inpw(REG_LCM_DCCS) | VPOSTB_VA_EN); //va-enable } /** * @brief Stop to display * @param none * @return none */ void vpostVAStopTrigger(void) { outpw(REG_LCM_DCCS, inpw(REG_LCM_DCCS) & ~(VPOSTB_DISP_OUT_EN | VPOSTB_VA_EN)); //OSD disable } /** * @brief Configure LCD scaling attribute * @param[in] u8HIntegral is horizontal integral * @param[in] u16HDecimal is horizontal decimal * @param[in] u8VIntegral is vertical integral * @param[in] u16VDecimal is vertical decimal * @param[in] u32Mode is scale mode, value could be * - \ref VA_SCALE_INTERPOLATION * - \ref VA_SCALE_DUPLICATION * @return none */ void vpostVAScalingCtrl(uint8_t u8HIntegral, uint16_t u16HDecimal, uint8_t u8VIntegral, uint16_t u16VDecimal, uint32_t u32Mode) { outpw(REG_LCM_VA_SCALE, ((((uint32_t)u8VIntegral << 10) + ((uint32_t)ceil((double)1024 / 10)*u16VDecimal)) << 16) | (((uint32_t)u8HIntegral << 10) + ((uint32_t)ceil((double)1024 / 10)*u16HDecimal)) | u32Mode); } /** * @brief Set OSD color key * @param[in] u8CKeyColorR is color key R color * @param[in] u8CKeyColorG is color key G color * @param[in] u8CKeyColorB is color key B color * @return none */ void vpostOSDSetColKey(uint8_t u8CKeyColorR, uint8_t u8CKeyColorG, uint8_t u8CKeyColorB) { outpw(REG_LCM_OSD_OVERLAY, inpw(REG_LCM_OSD_OVERLAY) & ~(VPOSTB_BLI_ON | VPOSTB_CKEY_ON)); //blinking disable, color-key disable outpw(REG_LCM_OSD_OVERLAY, inpw(REG_LCM_OSD_OVERLAY) | VPOSTB_CKEY_ON);//color-key enable outpw(REG_LCM_OSD_CKEY, ((uint32_t)(u8CKeyColorR << 16) | (uint32_t)(u8CKeyColorG << 8) | u8CKeyColorB)); } /** * @brief Set OSD color mask, OSD data only will be displayed if the mask bit is set as 1. * @param[in] u8MaskColorR is color key R color * @param[in] u8MaskColorG is color key G color * @param[in] u8MaskColorB is color key B color * @return none */ void vpostOSDSetColMask(uint8_t u8MaskColorR, uint8_t u8MaskColorG, uint8_t u8MaskColorB) { outpw(REG_LCM_OSD_CMASK, ((u8MaskColorR << 16) | (u8MaskColorG << 8) | u8MaskColorB)); } /** * @brief Set OSD blinking function * @param[in] u8OSDBlinkVcnt is blinking cycle time, unit is VSync * @return none */ void vpostOSDSetBlinking(uint8_t u8OSDBlinkVcnt) { outpw(REG_LCM_OSD_OVERLAY, inpw(REG_LCM_OSD_OVERLAY) & ~(VPOSTB_BLI_ON | VPOSTB_CKEY_ON)); //blinking disable, color-key disable outpw(REG_LCM_OSD_OVERLAY, inpw(REG_LCM_OSD_OVERLAY) | VPOSTB_BLI_ON); outpw(REG_LCM_OSD_OVERLAY, inpw(REG_LCM_OSD_OVERLAY) | ((uint32_t)(u8OSDBlinkVcnt) << 16)); } /** * @brief Disable OSD blinking function * @param none * @return none */ void vpostOSDDisableBlinking(void) { outpw(REG_LCM_OSD_OVERLAY, inpw(REG_LCM_OSD_OVERLAY) & ~ VPOSTB_BLI_ON); } /** * @brief Configure display attributes of OSD * @param[in] u32OSDSrcType is display type, value could be * - \ref OSD_SRC_YUV422 * - \ref OSD_SRC_YCBCR422 * - \ref OSD_SRC_RGB888 * - \ref OSD_SRC_RGB666 * - \ref OSD_SRC_RGB565 * - \ref OSD_SRC_RGB444_LOW * - \ref OSD_SRC_RGB444_HIGH * - \ref OSD_SRC_RGB332 * @return none */ void vpostSetOSDSrc(uint32_t u32OSDSrcType) { uint32_t u32BytePerPixel, VA_FF, VA_Sride; outpw(REG_LCM_DCCS, inpw(REG_LCM_DCCS) & ~(7 << 12) | u32OSDSrcType); curOSDDev.ucOSDSrcFormat = u32OSDSrcType; switch (u32OSDSrcType) { case OSD_SRC_YUV422: case OSD_SRC_YCBCR422: case OSD_SRC_RGB565: u32BytePerPixel = 2; break; case OSD_SRC_RGB666: case OSD_SRC_RGB888: u32BytePerPixel = 4; break; default: u32BytePerPixel = 2; } /* set video stream frame buffer control */ VA_FF = curOSDDev.nOSDWidth * u32BytePerPixel / 4; VA_Sride = curOSDDev.nOSDWidth * u32BytePerPixel / 4; outpw(REG_LCM_OSD_FBCTRL, inpw(REG_LCM_OSD_FBCTRL) & ~0x7ff07ff | (VA_FF << 16) | VA_Sride); } /** * @brief Get the pointer of OSD frame buffer * @param none * @return pointer of OSD frame buffer * @retval NULL fail. * @note Must call \ref vpostOSDSetWindow and \ref vpostSetOSDSrc before calling this function */ uint8_t *vpostGetOSDBuffer(void) { uint32_t u32BytePerPixel; uint8_t *u8BufPtr; if ((curOSDDev.nOSDWidth == 0) || (curOSDDev.nOSDHeight == 0)) { return NULL; } switch (curOSDDev.ucOSDSrcFormat) { case OSD_SRC_YUV422: case OSD_SRC_YCBCR422: case OSD_SRC_RGB565: u32BytePerPixel = 2; break; case OSD_SRC_RGB666: case OSD_SRC_RGB888: u32BytePerPixel = 4; break; default: u32BytePerPixel = 2; } u8BufPtr = (uint8_t *)malloc((curOSDDev.nOSDWidth * curOSDDev.nOSDHeight * u32BytePerPixel) + 32); if (u8BufPtr == NULL) return NULL; u8BufPtr = (uint8_t *)shift_pointer((uint32_t)u8BufPtr, 32); outpw(REG_LCM_OSD_BADDR, (uint32_t)((uint32_t)u8BufPtr | 0x80000000)); return (uint8_t *)((uint32_t)u8BufPtr | 0x80000000); } /** * @brief Get the pointer of OSD buffer * @param[in] u32Cnt is the frame buffer count to allocate. Min value is 1. * @return pointer of frame buffer * @retval NULL fail. * @note before calling this function, display width, height and source format must be set first. */ uint8_t *vpostGetMultiOSDBuffer(uint32_t u32Cnt) { uint32_t u32BytePerPixel; uint8_t *u8BufPtr; if ((curOSDDev.nOSDWidth == 0) || (curOSDDev.nOSDHeight == 0)) { return NULL; } switch (curOSDDev.ucOSDSrcFormat) { case OSD_SRC_YUV422: case OSD_SRC_YCBCR422: case OSD_SRC_RGB565: u32BytePerPixel = 2; break; case OSD_SRC_RGB666: case OSD_SRC_RGB888: u32BytePerPixel = 4; break; default: u32BytePerPixel = 2; } u8BufPtr = (uint8_t *)malloc((curOSDDev.nOSDWidth * curOSDDev.nOSDHeight * u32BytePerPixel) * u32Cnt + 32); if (u8BufPtr == NULL) return NULL; u8BufPtr = (uint8_t *)shift_pointer((uint32_t)u8BufPtr, 32); outpw(REG_LCM_OSD_BADDR, (uint32_t)((uint32_t)u8BufPtr | 0x80000000)); return (uint8_t *)((uint32_t)u8BufPtr | 0x80000000); } void vpostSetOSDBuffer(uint8_t *u8BufPtr) { outpw(REG_LCM_OSD_BADDR, (uint32_t)((uint32_t)u8BufPtr | 0x80000000)); } /** * @brief Enable OSD function * @param none * @return none */ void vpostOSDEnable(void) { outpw(REG_LCM_DCCS, inpw(REG_LCM_DCCS) | VPOSTB_OSD_EN); //OSD enable } /** * @brief Disable OSD function * @param none * @return none */ void vpostOSDDisable(void) { outpw(REG_LCM_DCCS, inpw(REG_LCM_DCCS) & ~VPOSTB_OSD_EN); //OSD disable } /** * @brief Configure OSD scaling attribute * @param[in] u8HIntegral is horizontal integral * @param[in] u16HDecimal is horizontal decimal * @param[in] u8VScall is scale mode, value could be * - \ref VPOSTB_OSD_VUP_1X * - \ref VPOSTB_OSD_VUP_2X * - \ref VPOSTB_OSD_VUP_4X * @return none */ void vpostOSDScalingCtrl(uint8_t u8HIntegral, uint16_t u16HDecimal, uint8_t u8VScall) { outpw(REG_LCM_DCCS, inpw(REG_LCM_DCCS) & 0xfff0ffff); //clear OSD scaling setting if (u8VScall != 0) outpw(REG_LCM_DCCS, inpw(REG_LCM_DCCS) | (u8VScall << 16)); outpw(REG_LCM_OSD_SCALE, ((uint32_t)u8HIntegral << 10) | ((uint32_t)ceil((double)1024 / 10 * u16HDecimal)) << 6); } /** * @brief Set OSD display window, including start position, width and height. * @param[in] u32XStart is X start position * @param[in] u32YStart is Y start position * @param[in] u32Width is OSD display width * @param[in] u32Height is OSD display height * @return none */ void vpostOSDSetWindow(uint32_t u32XStart, uint32_t u32YStart, uint32_t u32Width, uint32_t u32Height) { outpw(REG_LCM_OSD_WINS, ((u32YStart + 1) << 16) | (u32XStart + 1)); outpw(REG_LCM_OSD_WINE, ((u32YStart + u32Height) << 16) | (u32XStart + u32Width)); curOSDDev.nOSDWidth = u32Width; curOSDDev.nOSDHeight = u32Height; } /** * @brief Initialize hardware cursor function * @param[in] u32CursorBMPBuff is pointer of hardware cursor image * @param[in] ucMode is hardware cursor mode, value could be * - \ref HC_MODE0 * - \ref HC_MODE1 * - \ref HC_MODE2 * - \ref HC_MODE3 * - \ref HC_MODE4 * - \ref HC_MODE5 * @return none */ void vpostHCInit(uint32_t *u32CursorBMPBuff, VA_HCMODE_E ucMode) { int bpp = 2; int BlockWidth = 32; int bpw = 32; outpw(REG_LCM_HC_CTRL, inpw(REG_LCM_HC_CTRL) & ~0x003f3f00 | (0x00 << 8) | (0x00 << 16)); //set TIP if (ucMode == HC_MODE0) { bpp = 2; BlockWidth = 32; outpw(REG_LCM_HC_CTRL, inpw(REG_LCM_HC_CTRL) & ~0x7); //set mode 0 32X32X2bpp 4 color } else if (ucMode == HC_MODE1) { bpp = 2; BlockWidth = 32; outpw(REG_LCM_HC_CTRL, inpw(REG_LCM_HC_CTRL) & ~0x7 | 0x1); //set mode 1 32X32X2bpp 3 color and 1 transparent } else if (ucMode == HC_MODE2) { bpp = 2; BlockWidth = 64; outpw(REG_LCM_HC_CTRL, inpw(REG_LCM_HC_CTRL) & ~0x7 | 0x2); //set mode 2 64X64X2bpp 4 color } else if (ucMode == HC_MODE3) { bpp = 2; BlockWidth = 64; outpw(REG_LCM_HC_CTRL, inpw(REG_LCM_HC_CTRL) & ~0x7 | 0x3); //set mode 3 64X64X2bpp 3 color and 1 transparent } else if (ucMode == HC_MODE4) { bpp = 1; BlockWidth = 128; outpw(REG_LCM_HC_CTRL, inpw(REG_LCM_HC_CTRL) & ~0x7 | 0x4); //set mode 4 128X128X1bpp 2 color } else if (ucMode == HC_MODE5) { bpp = 1; BlockWidth = 128; outpw(REG_LCM_HC_CTRL, inpw(REG_LCM_HC_CTRL) & ~0x7 | 0x5); //set mode 5 128X128X1bpp 1 color and 1 transparent } outpw(REG_LCM_HC_WBCTRL, ((bpp * BlockWidth / bpw) << 16) | (bpp * BlockWidth / bpw)); outpw(REG_LCM_HC_BADDR, (uint32_t)u32CursorBMPBuff); outpw(REG_LCM_HC_COLOR0, 0x00ff0000); // RED color outpw(REG_LCM_HC_COLOR1, 0x0000ff00); // GREEN color outpw(REG_LCM_HC_COLOR2, 0x000000ff); // BLUE color outpw(REG_LCM_HC_COLOR3, 0x00ffff00); // YELLOW color outpw(REG_LCM_DCCS, inpw(REG_LCM_DCCS) | VPOSTB_HC_EN); } /** * @brief Set the position of hardware cursor * @param[in] u32CursorX is X position * @param[in] u32CursorY is Y position * @return none */ void vpostHCPosCtrl(uint32_t u32CursorX, uint32_t u32CursorY) { outpw(REG_LCM_HC_POS, (u32CursorY << 16) | u32CursorX); //set Cursor position } /** * @brief Set OSD overlay condition * @param[in] u8OSDDisplayMatch is display method when mask bit is matched, value could be * - \ref DISPLAY_VIDEO * - \ref DISPLAY_OSD * - \ref DISPLAY_SYNTHESIZED * @param[in] u8OSDDisplayUnMatch is display method when mask bit is unmatched * - \ref DISPLAY_VIDEO * - \ref DISPLAY_OSD * - \ref DISPLAY_SYNTHESIZED * @param[in] u8OSDSynW is synthesis video weighting, based on match condition * @return none */ void vpostOSDSetOverlay(uint8_t u8OSDDisplayMatch, uint8_t u8OSDDisplayUnMatch, uint8_t u8OSDSynW) { /* clear OCR0 and OCR1 */ outpw(REG_LCM_OSD_OVERLAY, inpw(REG_LCM_OSD_OVERLAY) & 0xfffffff0); /* match condition */ if (u8OSDDisplayMatch != 0) { outpw(REG_LCM_OSD_OVERLAY, inpw(REG_LCM_OSD_OVERLAY) | (u8OSDDisplayMatch << 2)); } /* unmatch condition */ if (u8OSDDisplayUnMatch != 0) { outpw(REG_LCM_OSD_OVERLAY, inpw(REG_LCM_OSD_OVERLAY) | (u8OSDDisplayUnMatch)); } /* synthesized weight */ if (u8OSDDisplayMatch == DISPLAY_SYNTHESIZED || u8OSDDisplayUnMatch == DISPLAY_SYNTHESIZED) { outpw(REG_LCM_OSD_OVERLAY, inpw(REG_LCM_OSD_OVERLAY) | (u8OSDSynW << 4)); } } /** * @brief Write MPU command * @param[in] uscmd MPU command code * @return none */ void vpostMPUWriteAddr(uint16_t uscmd) { outpw(REG_LCM_MPU_CMD, inpw(REG_LCM_MPU_CMD) & ~(1 << 30)); //RS=0 outpw(REG_LCM_MPU_CMD, inpw(REG_LCM_MPU_CMD) & ~(1 << 29)); //w outpw(REG_LCM_DCCS, (inpw(REG_LCM_DCCS) | (1 << 5))); //CMD ON outpw(REG_LCM_MPU_CMD, (inpw(REG_LCM_MPU_CMD) & 0xffff0000 | uscmd)); while (inpw(REG_LCM_MPU_CMD) & (1UL << 31)); outpw(REG_LCM_DCCS, (inpw(REG_LCM_DCCS) & ~(1 << 5))); //CMD OFF } /** * @brief Write MPU data * @param[in] usdata MPU data * @return none */ void vpostMPUWriteData(uint16_t usdata) { outpw(REG_LCM_MPU_CMD, inpw(REG_LCM_MPU_CMD) | (1 << 30)); //RS=1 outpw(REG_LCM_MPU_CMD, inpw(REG_LCM_MPU_CMD) & ~(1 << 29)); //w outpw(REG_LCM_DCCS, (inpw(REG_LCM_DCCS) | (1 << 5))); //CMD ON outpw(REG_LCM_MPU_CMD, inpw(REG_LCM_MPU_CMD) & 0xffff0000 | usdata); while (inpw(REG_LCM_MPU_CMD) & (1UL << 31)); outpw(REG_LCM_DCCS, (inpw(REG_LCM_DCCS) & ~(1 << 5))); //CMD OFF } /** * @brief Read MPU data * @param none * @return MPU data */ uint32_t vpostMPUReadData(void) { uint32_t udata; outpw(REG_LCM_MPU_CMD, inpw(REG_LCM_MPU_CMD) | (1 << 30)); //RS=1 outpw(REG_LCM_DCCS, (inpw(REG_LCM_DCCS) | (1 << 5))); //CMD ON outpw(REG_LCM_MPU_CMD, inpw(REG_LCM_MPU_CMD) | (1 << 29)); //r while (inpw(REG_LCM_MPU_CMD) & (1UL << 31)); udata = inpw(REG_LCM_MPU_CMD) & 0xffff; outpw(REG_LCM_DCCS, (inpw(REG_LCM_DCCS) & ~(1 << 5))); //CMD OFF return udata; } /*@}*/ /* end of group N9H30_LCD_EXPORTED_FUNCTIONS */ /*@}*/ /* end of group N9H30_LCD_Driver */ /*@}*/ /* end of group N9H30_Device_Driver */ /*** (C) COPYRIGHT 2018 Nuvoton Technology Corp. ***/