diff --git a/bsp/stm32/libraries/HAL_Drivers/SConscript b/bsp/stm32/libraries/HAL_Drivers/SConscript index fddbc1fa932be27a801769010afe282d194109e8..2aaaf1d9186d4e12a2e18a4838fc33eb5a8a6da3 100644 --- a/bsp/stm32/libraries/HAL_Drivers/SConscript +++ b/bsp/stm32/libraries/HAL_Drivers/SConscript @@ -10,7 +10,7 @@ src = Split(""" if GetDepend(['RT_USING_PIN']): src += ['drv_gpio.c'] - + if GetDepend(['RT_USING_SERIAL']): src += ['drv_usart.c'] @@ -35,7 +35,7 @@ if GetDepend(['BSP_USING_ETH', 'RT_USING_LWIP']): if GetDepend(['RT_USING_ADC']): src += Glob('drv_adc.c') - + if GetDepend(['RT_USING_DAC']): src += Glob('drv_dac.c') @@ -58,6 +58,9 @@ if GetDepend('BSP_USING_LCD_MIPI'): if GetDepend('BSP_USING_ONCHIP_RTC'): src += ['drv_rtc.c'] +if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32G0']): + src += ['drv_flash/drv_flash_g0.c'] + if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32F0']): src += ['drv_flash/drv_flash_f0.c'] diff --git a/bsp/stm32/libraries/HAL_Drivers/drv_flash/drv_flash_g0.c b/bsp/stm32/libraries/HAL_Drivers/drv_flash/drv_flash_g0.c new file mode 100644 index 0000000000000000000000000000000000000000..c5eefb94972bb0214498d1d546d72454e949a420 --- /dev/null +++ b/bsp/stm32/libraries/HAL_Drivers/drv_flash/drv_flash_g0.c @@ -0,0 +1,230 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2020-06-27 NU-LL first version + */ + +#include "board.h" + +#ifdef BSP_USING_ON_CHIP_FLASH +#include "drv_config.h" +#include "drv_flash.h" + +#if defined(PKG_USING_FAL) +#include "fal.h" +#endif + +// #define DRV_DEBUG +#define LOG_TAG "drv.flash" +#include + +/** + * @brief Gets the page of a given address + * @param Addr: Address of the FLASH Memory + * @retval The page of a given address + */ +static uint32_t GetPage(uint32_t addr) +{ + uint32_t page = 0; + page = RT_ALIGN_DOWN(addr-STM32_FLASH_START_ADRESS, FLASH_PAGE_SIZE)/FLASH_PAGE_SIZE; + return page; +} + +/** + * Read data from flash. + * @note This operation's units is word. + * + * @param addr flash address + * @param buf buffer to store read data + * @param size read bytes size + * + * @return result + */ +int stm32_flash_read(rt_uint32_t addr, rt_uint8_t *buf, size_t size) +{ + size_t i; + + if ((addr + size) > STM32_FLASH_END_ADDRESS) + { + LOG_E("read outrange flash size! addr is (0x%p)", (void *)(addr + size)); + return -RT_EINVAL; + } + + for (i = 0; i < size; i++, buf++, addr++) + { + *buf = *(rt_uint8_t *) addr; + } + + return size; +} + +/** + * Write data to flash. + * @note This operation's units is word. + * @note This operation must after erase. @see flash_erase. + * + * @param addr flash address + * @param buf the write data buffer + * @param size write bytes size + * + * @return result + */ +int stm32_flash_write(rt_uint32_t addr, const uint8_t *buf, size_t size) +{ + size_t i, j; + rt_err_t result = 0; + rt_uint64_t write_data = 0, temp_data = 0; + + if ((addr + size) > STM32_FLASH_END_ADDRESS) + { + LOG_E("ERROR: write outrange flash size! addr is (0x%p)\n", (void*)(addr + size)); + return -RT_EINVAL; + } + + if(addr % 8 != 0) + { + LOG_E("write addr must be 8-byte alignment"); + return -RT_EINVAL; + } + + HAL_FLASH_Unlock(); + + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | FLASH_FLAG_PGSERR); + + if (size < 1) + { + return -RT_ERROR; + } + + for (i = 0; i < size;) + { + if ((size - i) < 8) + { + for (j = 0; (size - i) > 0; i++, j++) + { + temp_data = *buf; + write_data = (write_data) | (temp_data << 8 * j); + buf ++; + } + } + else + { + for (j = 0; j < 8; j++, i++) + { + temp_data = *buf; + write_data = (write_data) | (temp_data << 8 * j); + buf ++; + } + } + + /* write data */ + if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_DOUBLEWORD, addr, write_data) == HAL_OK) + { + /* Check the written value */ + if (*(uint64_t*)addr != write_data) + { + LOG_E("ERROR: write data != read data\n"); + result = -RT_ERROR; + goto __exit; + } + } + else + { + result = -RT_ERROR; + goto __exit; + } + + temp_data = 0; + write_data = 0; + + addr += 8; + } + +__exit: + HAL_FLASH_Lock(); + if (result != 0) + { + return result; + } + + return size; +} + +/** + * Erase data on flash. + * @note This operation is irreversible. + * @note This operation's units is different which on many chips. + * + * @param addr flash address + * @param size erase bytes size + * + * @return result + */ +int stm32_flash_erase(rt_uint32_t addr, size_t size) +{ + rt_err_t result = RT_EOK; + uint32_t PAGEError = 0; + + /*Variable used for Erase procedure*/ + FLASH_EraseInitTypeDef EraseInitStruct; + + if ((addr + size) > STM32_FLASH_END_ADDRESS) + { + LOG_E("ERROR: erase outrange flash size! addr is (0x%p)\n", (void *)(addr + size)); + return -RT_EINVAL; + } + + HAL_FLASH_Unlock(); + + /* Fill EraseInit structure*/ + EraseInitStruct.TypeErase = FLASH_TYPEERASE_PAGES; + EraseInitStruct.Page = GetPage(addr); + EraseInitStruct.NbPages = (size + FLASH_PAGE_SIZE - 1) / FLASH_PAGE_SIZE; + + if (HAL_FLASHEx_Erase(&EraseInitStruct, &PAGEError) != HAL_OK) + { + result = -RT_ERROR; + goto __exit; + } + +__exit: + HAL_FLASH_Lock(); + + if (result != RT_EOK) + { + return result; + } + + LOG_D("erase done: addr (0x%p), size %d", (void *)addr, size); + return size; +} + +#if defined(PKG_USING_FAL) + +static int fal_flash_read(long offset, rt_uint8_t *buf, size_t size); +static int fal_flash_write(long offset, const rt_uint8_t *buf, size_t size); +static int fal_flash_erase(long offset, size_t size); + +const struct fal_flash_dev stm32_onchip_flash = { "onchip_flash", STM32_FLASH_START_ADRESS, STM32_FLASH_SIZE, FLASH_PAGE_SIZE, {NULL, fal_flash_read, fal_flash_write, fal_flash_erase} }; + +static int fal_flash_read(long offset, rt_uint8_t *buf, size_t size) +{ + return stm32_flash_read(stm32_onchip_flash.addr + offset, buf, size); +} + +static int fal_flash_write(long offset, const rt_uint8_t *buf, size_t size) +{ + return stm32_flash_write(stm32_onchip_flash.addr + offset, buf, size); +} + +static int fal_flash_erase(long offset, size_t size) +{ + return stm32_flash_erase(stm32_onchip_flash.addr + offset, size); +} + +#endif +#endif /* BSP_USING_ON_CHIP_FLASH */ diff --git a/bsp/stm32/libraries/STM32G0xx_HAL/SConscript b/bsp/stm32/libraries/STM32G0xx_HAL/SConscript index 934239833de12d4f05ef7a5e4703f3dae16d1b82..3d712c5d0b67c693f94bb03bd09bdbd713b115aa 100644 --- a/bsp/stm32/libraries/STM32G0xx_HAL/SConscript +++ b/bsp/stm32/libraries/STM32G0xx_HAL/SConscript @@ -33,7 +33,7 @@ if GetDepend(['RT_USING_I2C']): if GetDepend(['RT_USING_SPI']): src += ['STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi.c'] - src += ['STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi_ex.c'] + src += ['STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi_ex.c'] src += ['STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_spi.c'] if GetDepend(['RT_USING_HWTIMER']) or GetDepend(['RT_USING_PWM']): @@ -50,7 +50,12 @@ if GetDepend(['RT_USING_WDT']): src += ['STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_iwdg.c'] src += ['STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_wwdg.c'] -path = [cwd + '/STM32G0xx_HAL_Driver/Inc', +if GetDepend(['RT_USING_RTC']): + src += ['STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc.c'] + src += ['STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc_ex.c'] + src += ['STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rtc.c'] + +path = [cwd + '/STM32G0xx_HAL_Driver/Inc', cwd + '/CMSIS/Device/ST/STM32G0xx/Include', cwd + '/CMSIS/Include'] diff --git a/bsp/stm32/stm32g070-st-nucleo/.config b/bsp/stm32/stm32g070-st-nucleo/.config new file mode 100644 index 0000000000000000000000000000000000000000..8c3da02cd28c413a61c2f639398766b6151606d7 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/.config @@ -0,0 +1,453 @@ +# +# Automatically generated file; DO NOT EDIT. +# RT-Thread Configuration +# + +# +# RT-Thread Kernel +# +CONFIG_RT_NAME_MAX=8 +# CONFIG_RT_USING_ARCH_DATA_TYPE is not set +# CONFIG_RT_USING_SMP is not set +CONFIG_RT_ALIGN_SIZE=4 +# CONFIG_RT_THREAD_PRIORITY_8 is not set +CONFIG_RT_THREAD_PRIORITY_32=y +# CONFIG_RT_THREAD_PRIORITY_256 is not set +CONFIG_RT_THREAD_PRIORITY_MAX=32 +CONFIG_RT_TICK_PER_SECOND=100 +CONFIG_RT_USING_OVERFLOW_CHECK=y +CONFIG_RT_USING_HOOK=y +CONFIG_RT_USING_IDLE_HOOK=y +CONFIG_RT_IDLE_HOOK_LIST_SIZE=4 +CONFIG_IDLE_THREAD_STACK_SIZE=256 +# CONFIG_RT_USING_TIMER_SOFT is not set +CONFIG_RT_DEBUG=y +CONFIG_RT_DEBUG_COLOR=y +# CONFIG_RT_DEBUG_INIT_CONFIG is not set +# CONFIG_RT_DEBUG_THREAD_CONFIG is not set +# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set +# CONFIG_RT_DEBUG_IPC_CONFIG is not set +# CONFIG_RT_DEBUG_TIMER_CONFIG is not set +# CONFIG_RT_DEBUG_IRQ_CONFIG is not set +# CONFIG_RT_DEBUG_MEM_CONFIG is not set +# CONFIG_RT_DEBUG_SLAB_CONFIG is not set +# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set +# CONFIG_RT_DEBUG_MODULE_CONFIG is not set + +# +# Inter-Thread communication +# +CONFIG_RT_USING_SEMAPHORE=y +CONFIG_RT_USING_MUTEX=y +CONFIG_RT_USING_EVENT=y +CONFIG_RT_USING_MAILBOX=y +CONFIG_RT_USING_MESSAGEQUEUE=y +# CONFIG_RT_USING_SIGNALS is not set + +# +# Memory Management +# +CONFIG_RT_USING_MEMPOOL=y +# CONFIG_RT_USING_MEMHEAP is not set +# CONFIG_RT_USING_NOHEAP is not set +CONFIG_RT_USING_SMALL_MEM=y +# CONFIG_RT_USING_SLAB is not set +# CONFIG_RT_USING_MEMTRACE is not set +CONFIG_RT_USING_HEAP=y + +# +# Kernel Device Object +# +CONFIG_RT_USING_DEVICE=y +# CONFIG_RT_USING_DEVICE_OPS is not set +# CONFIG_RT_USING_INTERRUPT_INFO is not set +CONFIG_RT_USING_CONSOLE=y +CONFIG_RT_CONSOLEBUF_SIZE=128 +CONFIG_RT_CONSOLE_DEVICE_NAME="uart2" +CONFIG_RT_VER_NUM=0x40003 +CONFIG_ARCH_ARM=y +# CONFIG_RT_USING_CPU_FFS is not set +CONFIG_ARCH_ARM_CORTEX_M=y +CONFIG_ARCH_ARM_CORTEX_M0=y +# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set + +# +# RT-Thread Components +# +CONFIG_RT_USING_COMPONENTS_INIT=y +CONFIG_RT_USING_USER_MAIN=y +CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048 +CONFIG_RT_MAIN_THREAD_PRIORITY=10 + +# +# C++ features +# +# CONFIG_RT_USING_CPLUSPLUS is not set + +# +# Command shell +# +CONFIG_RT_USING_FINSH=y +CONFIG_FINSH_THREAD_NAME="tshell" +CONFIG_FINSH_USING_HISTORY=y +CONFIG_FINSH_HISTORY_LINES=5 +CONFIG_FINSH_USING_SYMTAB=y +CONFIG_FINSH_USING_DESCRIPTION=y +# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set +CONFIG_FINSH_THREAD_PRIORITY=20 +CONFIG_FINSH_THREAD_STACK_SIZE=4096 +CONFIG_FINSH_CMD_SIZE=80 +# CONFIG_FINSH_USING_AUTH is not set +CONFIG_FINSH_USING_MSH=y +CONFIG_FINSH_USING_MSH_DEFAULT=y +# CONFIG_FINSH_USING_MSH_ONLY is not set +CONFIG_FINSH_ARG_MAX=10 + +# +# Device virtual file system +# +# CONFIG_RT_USING_DFS is not set + +# +# Device Drivers +# +CONFIG_RT_USING_DEVICE_IPC=y +CONFIG_RT_PIPE_BUFSZ=512 +# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set +CONFIG_RT_USING_SERIAL=y +# CONFIG_RT_SERIAL_USING_DMA is not set +CONFIG_RT_SERIAL_RB_BUFSZ=64 +# CONFIG_RT_USING_CAN is not set +# CONFIG_RT_USING_HWTIMER is not set +# CONFIG_RT_USING_CPUTIME is not set +# CONFIG_RT_USING_I2C is not set +CONFIG_RT_USING_PIN=y +# CONFIG_RT_USING_ADC is not set +# CONFIG_RT_USING_DAC is not set +# CONFIG_RT_USING_PWM is not set +# CONFIG_RT_USING_MTD_NOR is not set +# CONFIG_RT_USING_MTD_NAND is not set +# CONFIG_RT_USING_PM is not set +# CONFIG_RT_USING_RTC is not set +# CONFIG_RT_USING_SDIO is not set +# CONFIG_RT_USING_SPI is not set +# CONFIG_RT_USING_WDT is not set +# CONFIG_RT_USING_AUDIO is not set +# CONFIG_RT_USING_SENSOR is not set +# CONFIG_RT_USING_TOUCH is not set +# CONFIG_RT_USING_HWCRYPTO is not set +# CONFIG_RT_USING_PULSE_ENCODER is not set +# CONFIG_RT_USING_INPUT_CAPTURE is not set +# CONFIG_RT_USING_WIFI is not set + +# +# Using USB +# +# CONFIG_RT_USING_USB_HOST is not set +# CONFIG_RT_USING_USB_DEVICE is not set + +# +# POSIX layer and C standard library +# +# CONFIG_RT_USING_LIBC is not set +# CONFIG_RT_USING_PTHREADS is not set +CONFIG_RT_LIBC_USING_TIME=y + +# +# Network +# + +# +# Socket abstraction layer +# +# CONFIG_RT_USING_SAL is not set + +# +# Network interface device +# +# CONFIG_RT_USING_NETDEV is not set + +# +# light weight TCP/IP stack +# +# CONFIG_RT_USING_LWIP is not set + +# +# AT commands +# +# CONFIG_RT_USING_AT is not set + +# +# VBUS(Virtual Software BUS) +# +# CONFIG_RT_USING_VBUS is not set + +# +# Utilities +# +# CONFIG_RT_USING_RYM is not set +# CONFIG_RT_USING_ULOG is not set +# CONFIG_RT_USING_UTEST is not set +# CONFIG_RT_USING_LWP is not set + +# +# RT-Thread online packages +# + +# +# IoT - internet of things +# +# CONFIG_PKG_USING_PAHOMQTT is not set +# CONFIG_PKG_USING_UMQTT is not set +# CONFIG_PKG_USING_WEBCLIENT is not set +# CONFIG_PKG_USING_WEBNET is not set +# CONFIG_PKG_USING_MONGOOSE is not set +# CONFIG_PKG_USING_MYMQTT is not set +# CONFIG_PKG_USING_KAWAII_MQTT is not set +# CONFIG_PKG_USING_BC28_MQTT is not set +# CONFIG_PKG_USING_WEBTERMINAL is not set +# CONFIG_PKG_USING_CJSON is not set +# CONFIG_PKG_USING_JSMN is not set +# CONFIG_PKG_USING_LIBMODBUS is not set +# CONFIG_PKG_USING_FREEMODBUS is not set +# CONFIG_PKG_USING_LJSON is not set +# CONFIG_PKG_USING_EZXML is not set +# CONFIG_PKG_USING_NANOPB is not set + +# +# Wi-Fi +# + +# +# Marvell WiFi +# +# CONFIG_PKG_USING_WLANMARVELL is not set + +# +# Wiced WiFi +# +# CONFIG_PKG_USING_WLAN_WICED is not set +# CONFIG_PKG_USING_RW007 is not set +# CONFIG_PKG_USING_COAP is not set +# CONFIG_PKG_USING_NOPOLL is not set +# CONFIG_PKG_USING_NETUTILS is not set +# CONFIG_PKG_USING_CMUX is not set +# CONFIG_PKG_USING_PPP_DEVICE is not set +# CONFIG_PKG_USING_AT_DEVICE is not set +# CONFIG_PKG_USING_ATSRV_SOCKET is not set +# CONFIG_PKG_USING_WIZNET is not set + +# +# IoT Cloud +# +# CONFIG_PKG_USING_ONENET is not set +# CONFIG_PKG_USING_GAGENT_CLOUD is not set +# CONFIG_PKG_USING_ALI_IOTKIT is not set +# CONFIG_PKG_USING_AZURE is not set +# CONFIG_PKG_USING_TENCENT_IOT_EXPLORER is not set +# CONFIG_PKG_USING_JIOT-C-SDK is not set +# CONFIG_PKG_USING_UCLOUD_IOT_SDK is not set +# CONFIG_PKG_USING_JOYLINK is not set +# CONFIG_PKG_USING_NIMBLE is not set +# CONFIG_PKG_USING_OTA_DOWNLOADER is not set +# CONFIG_PKG_USING_IPMSG is not set +# CONFIG_PKG_USING_LSSDP is not set +# CONFIG_PKG_USING_AIRKISS_OPEN is not set +# CONFIG_PKG_USING_LIBRWS is not set +# CONFIG_PKG_USING_TCPSERVER is not set +# CONFIG_PKG_USING_PROTOBUF_C is not set +# CONFIG_PKG_USING_ONNX_PARSER is not set +# CONFIG_PKG_USING_ONNX_BACKEND is not set +# CONFIG_PKG_USING_DLT645 is not set +# CONFIG_PKG_USING_QXWZ is not set +# CONFIG_PKG_USING_SMTP_CLIENT is not set +# CONFIG_PKG_USING_ABUP_FOTA is not set +# CONFIG_PKG_USING_LIBCURL2RTT is not set +# CONFIG_PKG_USING_CAPNP is not set +# CONFIG_PKG_USING_RT_CJSON_TOOLS is not set +# CONFIG_PKG_USING_AGILE_TELNET is not set + +# +# security packages +# +# CONFIG_PKG_USING_MBEDTLS is not set +# CONFIG_PKG_USING_libsodium is not set +# CONFIG_PKG_USING_TINYCRYPT is not set +# CONFIG_PKG_USING_TFM is not set +# CONFIG_PKG_USING_YD_CRYPTO is not set + +# +# language packages +# +# CONFIG_PKG_USING_LUA is not set +# CONFIG_PKG_USING_JERRYSCRIPT is not set +# CONFIG_PKG_USING_MICROPYTHON is not set + +# +# multimedia packages +# +# CONFIG_PKG_USING_OPENMV is not set +# CONFIG_PKG_USING_MUPDF is not set +# CONFIG_PKG_USING_STEMWIN is not set +# CONFIG_PKG_USING_WAVPLAYER is not set +# CONFIG_PKG_USING_TJPGD is not set + +# +# tools packages +# +# CONFIG_PKG_USING_CMBACKTRACE is not set +# CONFIG_PKG_USING_EASYFLASH is not set +# CONFIG_PKG_USING_EASYLOGGER is not set +# CONFIG_PKG_USING_SYSTEMVIEW is not set +# CONFIG_PKG_USING_RDB is not set +# CONFIG_PKG_USING_QRCODE is not set +# CONFIG_PKG_USING_ULOG_EASYFLASH is not set +# CONFIG_PKG_USING_ADBD is not set +# CONFIG_PKG_USING_COREMARK is not set +# CONFIG_PKG_USING_DHRYSTONE is not set +# CONFIG_PKG_USING_NR_MICRO_SHELL is not set +# CONFIG_PKG_USING_CHINESE_FONT_LIBRARY is not set +# CONFIG_PKG_USING_LUNAR_CALENDAR is not set +# CONFIG_PKG_USING_BS8116A is not set +# CONFIG_PKG_USING_URLENCODE is not set + +# +# system packages +# +# CONFIG_PKG_USING_GUIENGINE is not set +# CONFIG_PKG_USING_CAIRO is not set +# CONFIG_PKG_USING_PIXMAN is not set +# CONFIG_PKG_USING_LWEXT4 is not set +# CONFIG_PKG_USING_PARTITION is not set +# CONFIG_PKG_USING_FAL is not set +# CONFIG_PKG_USING_FLASHDB is not set +# CONFIG_PKG_USING_SQLITE is not set +# CONFIG_PKG_USING_RTI is not set +# CONFIG_PKG_USING_LITTLEVGL2RTT is not set +# CONFIG_PKG_USING_CMSIS is not set +# CONFIG_PKG_USING_DFS_YAFFS is not set +# CONFIG_PKG_USING_LITTLEFS is not set +# CONFIG_PKG_USING_THREAD_POOL is not set +# CONFIG_PKG_USING_ROBOTS is not set +# CONFIG_PKG_USING_EV is not set +# CONFIG_PKG_USING_SYSWATCH is not set +# CONFIG_PKG_USING_SYS_LOAD_MONITOR is not set +# CONFIG_PKG_USING_PLCCORE is not set +# CONFIG_PKG_USING_RAMDISK is not set + +# +# peripheral libraries and drivers +# +# CONFIG_PKG_USING_SENSORS_DRIVERS is not set +# CONFIG_PKG_USING_REALTEK_AMEBA is not set +# CONFIG_PKG_USING_SHT2X is not set +# CONFIG_PKG_USING_SHT3X is not set +# CONFIG_PKG_USING_STM32_SDIO is not set +# CONFIG_PKG_USING_ICM20608 is not set +# CONFIG_PKG_USING_U8G2 is not set +# CONFIG_PKG_USING_BUTTON is not set +# CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_SX12XX is not set +# CONFIG_PKG_USING_SIGNAL_LED is not set +# CONFIG_PKG_USING_LEDBLINK is not set +# CONFIG_PKG_USING_LITTLED is not set +# CONFIG_PKG_USING_LKDGUI is not set +# CONFIG_PKG_USING_NRF5X_SDK is not set +# CONFIG_PKG_USING_NRFX is not set +# CONFIG_PKG_USING_WM_LIBRARIES is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set +# CONFIG_PKG_USING_INFRARED is not set +# CONFIG_PKG_USING_ROSSERIAL is not set +# CONFIG_PKG_USING_AGILE_BUTTON is not set +# CONFIG_PKG_USING_AGILE_LED is not set +# CONFIG_PKG_USING_AT24CXX is not set +# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set +# CONFIG_PKG_USING_AD7746 is not set +# CONFIG_PKG_USING_PCA9685 is not set +# CONFIG_PKG_USING_I2C_TOOLS is not set +# CONFIG_PKG_USING_NRF24L01 is not set +# CONFIG_PKG_USING_TOUCH_DRIVERS is not set +# CONFIG_PKG_USING_MAX17048 is not set +# CONFIG_PKG_USING_RPLIDAR is not set +# CONFIG_PKG_USING_AS608 is not set +# CONFIG_PKG_USING_RC522 is not set +# CONFIG_PKG_USING_EMBARC_BSP is not set +# CONFIG_PKG_USING_EXTERN_RTC_DRIVERS is not set +# CONFIG_PKG_USING_MULTI_RTIMER is not set +# CONFIG_PKG_USING_MAX7219 is not set +# CONFIG_PKG_USING_BEEP is not set +# CONFIG_PKG_USING_EASYBLINK is not set +# CONFIG_PKG_USING_PMS_SERIES is not set +# CONFIG_PKG_USING_CAN_YMODEM is not set +# CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set +# CONFIG_PKG_USING_QLED is not set + +# +# miscellaneous packages +# +# CONFIG_PKG_USING_LIBCSV is not set +# CONFIG_PKG_USING_OPTPARSE is not set +# CONFIG_PKG_USING_FASTLZ is not set +# CONFIG_PKG_USING_MINILZO is not set +# CONFIG_PKG_USING_QUICKLZ is not set +# CONFIG_PKG_USING_MULTIBUTTON is not set +# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set +# CONFIG_PKG_USING_CANFESTIVAL is not set +# CONFIG_PKG_USING_ZLIB is not set +# CONFIG_PKG_USING_DSTR is not set +# CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set +# CONFIG_PKG_USING_DIGITALCTRL is not set +# CONFIG_PKG_USING_UPACKER is not set +# CONFIG_PKG_USING_UPARAM is not set + +# +# samples: kernel and components samples +# +# CONFIG_PKG_USING_KERNEL_SAMPLES is not set +# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set +# CONFIG_PKG_USING_NETWORK_SAMPLES is not set +# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set +# CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set +# CONFIG_PKG_USING_NNOM is not set +# CONFIG_PKG_USING_LIBANN is not set +# CONFIG_PKG_USING_ELAPACK is not set +# CONFIG_PKG_USING_ARMv7M_DWT is not set +# CONFIG_PKG_USING_VT100 is not set +# CONFIG_PKG_USING_ULAPACK is not set +# CONFIG_PKG_USING_UKAL is not set +CONFIG_SOC_FAMILY_STM32=y +CONFIG_SOC_SERIES_STM32G0=y + +# +# Hardware Drivers Config +# +CONFIG_SOC_STM32G070RB=y + +# +# Onboard Peripheral Drivers +# +CONFIG_BSP_USING_USB_TO_UART=y + +# +# On-chip Peripheral Drivers +# +CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y +# CONFIG_BSP_USING_UART1 is not set +CONFIG_BSP_USING_UART2=y +# CONFIG_BSP_USING_UART3 is not set +# CONFIG_BSP_USING_TIM is not set +# CONFIG_BSP_USING_PWM is not set +# CONFIG_BSP_USING_SPI is not set +# CONFIG_BSP_USING_I2C1 is not set +# CONFIG_BSP_USING_ADC is not set +# CONFIG_BSP_USING_ON_CHIP_FLASH is not set +# CONFIG_BSP_USING_ONCHIP_RTC is not set +# CONFIG_BSP_USING_WDT is not set +# CONFIG_BSP_USING_UDID is not set + +# +# Board extended module Drivers +# diff --git a/bsp/stm32/stm32g070-st-nucleo/.gitignore b/bsp/stm32/stm32g070-st-nucleo/.gitignore new file mode 100644 index 0000000000000000000000000000000000000000..d45e936a4a4694c1571ea5fc656d99f96127737b --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/.gitignore @@ -0,0 +1,7 @@ +settings +build + +*.uvguix.* +*.uvoptx +settings/* +build/* diff --git a/bsp/stm32/stm32g070-st-nucleo/Kconfig b/bsp/stm32/stm32g070-st-nucleo/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..79b160b856783cfaea4fc056458bc193e16f13d2 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/Kconfig @@ -0,0 +1,21 @@ +mainmenu "RT-Thread Configuration" + +config BSP_DIR + string + option env="BSP_ROOT" + default "." + +config RTT_DIR + string + option env="RTT_ROOT" + default "../../.." + +config PKGS_DIR + string + option env="PKGS_ROOT" + default "packages" + +source "$RTT_DIR/Kconfig" +source "$PKGS_DIR/Kconfig" +source "../libraries/Kconfig" +source "board/Kconfig" diff --git a/bsp/stm32/stm32g070-st-nucleo/README.md b/bsp/stm32/stm32g070-st-nucleo/README.md new file mode 100644 index 0000000000000000000000000000000000000000..b221d5e6d2462942215e4fb77bd1f82edf600d59 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/README.md @@ -0,0 +1,116 @@ +# STM32G071 BSP + +## 简介 + +本文档为 STM32G070RB-Nucleo 开发板的 BSP (板级支持包) 说明。 + +主要内容如下： + +- 开发板资源介绍 +- BSP 快速上手 +- 进阶使用方法 + +通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。 + +## 开发板介绍 + +STM32G070RB-Nucleo 开发板是 ST 官方推出的一款基于 ARM Cortex-M0+ 内核的开发板，最高主频为 64Mhz，该开发板具有丰富的扩展接口，可以方便验证 STM32G070RB 的芯片性能。 + +开发板外观如下图所示： + +![board](figures/board.jpg) + +该开发板常用 **板载资源** 如下： + +- MCU：STM32G070RB，主频 64MHz，128KB FLASH ，36KB RAM +- 外部 RAM：无 +- 外部 FLASH：无 +- 常用外设 + - 按键：1个，user（兼具唤醒功能，PC13） +- 常用接口：USB 转串口、arduino 接口等 +- 调试接口，标准 SWD + +开发板更多详细信息请参考 ST 的 [NUCLEO 开发板介绍](https://www.st.com/content/st_com/en/products/evaluation-tools/product-evaluation-tools/mcu-eval-tools/stm32-mcu-eval-tools/stm32-mcu-nucleo/nucleo-g070rb.html)。 + +## 外设支持 + +本 BSP 目前对外设的支持情况如下： + +| **板载外设** | **支持情况** | **备注** | +| :----------------- | :----------: | :------------------------------------- | +| ST-LINK 虚拟串口 | 支持 | 使用 USART2 | +| **片上外设** | **支持情况** | **备注** | +| GPIO | 支持 | PA0, PA1... PC15 ---> PIN: 0, 1...47 | +| UART | 支持 | USART1/2/3 | +| TIM | 支持 | TIM1/3 | +| PWM | 支持 | | +| SPI | 支持 | SPI1/2 | +| I2C | 支持 | 软件 I2C | +| ADC | 支持 | | +| WDT | 支持 | | +| FLASH | 支持 | 已适配 [FAL](https://github.com/RT-Thread-packages/fal) | +| RTC | 暂不支持 | 详见注意事项 | + +## 使用说明 + +使用说明分为如下两个章节： + +- 快速上手 + + 本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。 + +- 进阶使用 + + 本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。 + +### 快速上手 + +本 BSP 为开发者提供 MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。 + +#### 硬件连接 + +使用数据线连接开发板到 PC，打开电源开关。 + +#### 编译下载 + +双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。 + +> 将工程使用的仿真器设置为ST-Link并安装仿真器好驱动程序以后，将开发板连接到PC，点击下载按钮即可下载程序到开发板。 + +#### 运行结果 + +下载程序成功之后，系统会自动运行。 + +连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息: + +```bash + \ | / +- RT - Thread Operating System + / | \ 4.0.2 build Jul 1 2020 + 2006 - 2019 Copyright by rt-thread team +msh > +``` + +### 进阶使用 + +此 BSP 默认只开启了 GPIO 和 UART 的功能，如果需使用 SPI，I2C 等更多高级功能，需要利用 ENV 工具对BSP 进行配置，步骤如下： + +1. 在 bsp 下打开 env 工具。 + +2. 输入`menuconfig`命令配置工程，配置好之后保存退出。 + +3. 输入`pkgs --update`命令更新软件包。 + +4. 输入`scons --target=mdk5/iar` 命令重新生成工程。 + +本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。 + +## 注意事项 + +- G0系列RTC驱动有点问题，详见论坛 [该贴](https://www.rt-thread.org/qa/thread-424601-1-2.html) + +## 联系人信息 + +维护人: + +- [NU-LL](https://github.com/NU-LL) diff --git a/bsp/stm32/stm32g070-st-nucleo/SConscript b/bsp/stm32/stm32g070-st-nucleo/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..20f7689c53ca71a676748f79187f9764065466c5 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/SConscript @@ -0,0 +1,15 @@ +# for module compiling +import os +Import('RTT_ROOT') +from building import * + +cwd = GetCurrentDir() +objs = [] +list = os.listdir(cwd) + +for d in list: + path = os.path.join(cwd, d) + if os.path.isfile(os.path.join(path, 'SConscript')): + objs = objs + SConscript(os.path.join(d, 'SConscript')) + +Return('objs') diff --git a/bsp/stm32/stm32g070-st-nucleo/SConstruct b/bsp/stm32/stm32g070-st-nucleo/SConstruct new file mode 100644 index 0000000000000000000000000000000000000000..96fd191077eeca7036e04d4314ebcd6d0f9e8746 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/SConstruct @@ -0,0 +1,60 @@ +import os +import sys +import rtconfig + +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') +else: + RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..') + +sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')] +try: + from building import * +except: + print('Cannot found RT-Thread root directory, please check RTT_ROOT') + print(RTT_ROOT) + exit(-1) + +TARGET = 'rt-thread.' + rtconfig.TARGET_EXT + +DefaultEnvironment(tools=[]) +env = Environment(tools = ['mingw'], + AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS, + CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS, + AR = rtconfig.AR, ARFLAGS = '-rc', + CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS, + LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS) +env.PrependENVPath('PATH', rtconfig.EXEC_PATH) + +if rtconfig.PLATFORM == 'iar': + env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES']) + env.Replace(ARFLAGS = ['']) + env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map') + +Export('RTT_ROOT') +Export('rtconfig') + +SDK_ROOT = os.path.abspath('./') + +if os.path.exists(SDK_ROOT + '/libraries'): + libraries_path_prefix = SDK_ROOT + '/libraries' +else: + libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries' + +SDK_LIB = libraries_path_prefix +Export('SDK_LIB') + +# prepare building environment +objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False) + +stm32_library = 'STM32G0xx_HAL' +rtconfig.BSP_LIBRARY_TYPE = stm32_library + +# include libraries +objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript'))) + +# include drivers +objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript'))) + +# make a building +DoBuilding(TARGET, objs) diff --git a/bsp/stm32/stm32g070-st-nucleo/applications/SConscript b/bsp/stm32/stm32g070-st-nucleo/applications/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..01eb940dfb35f92c503a78b0b49a4354590f9f3a --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/applications/SConscript @@ -0,0 +1,11 @@ +Import('RTT_ROOT') +Import('rtconfig') +from building import * + +cwd = os.path.join(str(Dir('#')), 'applications') +src = Glob('*.c') +CPPPATH = [cwd, str(Dir('#'))] + +group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/stm32/stm32g070-st-nucleo/applications/main.c b/bsp/stm32/stm32g070-st-nucleo/applications/main.c new file mode 100644 index 0000000000000000000000000000000000000000..8541bd3b9fc6971e6535a430dfe96ea417e16152 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/applications/main.c @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-06 SummerGift change to new framework + */ + +#include +#include +#include + +/* defined the LED pin: PA5 */ +#define LED0_PIN GET_PIN(A, 5) + +int main(void) +{ + int count = 1; + /* set LED0 pin mode to output */ + rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT); + + while (count++) + { + rt_pin_write(LED0_PIN, PIN_HIGH); + rt_thread_mdelay(500); + rt_pin_write(LED0_PIN, PIN_LOW); + rt_thread_mdelay(500); + } + + return RT_EOK; +} diff --git a/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/.mxproject new file mode 100644 index 0000000000000000000000000000000000000000..03293ddd2ac6bad34bd378d1deca0726d7f9659b --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/.mxproject @@ -0,0 +1,12 @@ +[PreviousGenFiles] +HeaderPath=G:/1 Code/STM32/stm32g070-st-nucleo-doorcontroler/board/CubeMX_Config/Inc +HeaderFiles=stm32g0xx_it.h;stm32g0xx_hal_conf.h;main.h; +SourcePath=G:/1 Code/STM32/stm32g070-st-nucleo-doorcontroler/board/CubeMX_Config/Src +SourceFiles=stm32g0xx_it.c;stm32g0xx_hal_msp.c;main.c; + +[PreviousLibFiles] +LibFiles=Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ramfunc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h;Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_iwdg.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_system.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_wwdg.h;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_gpio.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_adc_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_adc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rcc_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_rcc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_flash_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_dma_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_pwr_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_cortex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_exti.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_iwdg.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_rtc_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_spi_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_tim_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_uart_ex.c;Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_hal_wwdg.c;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_gpio_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_adc_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_adc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rcc_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_rcc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_flash_ramfunc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_dma_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_pwr_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_cortex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_def.h;Drivers/STM32G0xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_exti.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_iwdg.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_rtc_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_spi_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_tim_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_ll_system.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_uart_ex.h;Drivers/STM32G0xx_HAL_Driver/Inc/stm32g0xx_hal_wwdg.h;Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g070xx.h;Drivers/CMSIS/Device/ST/STM32G0xx/Include/stm32g0xx.h;Drivers/CMSIS/Device/ST/STM32G0xx/Include/system_stm32g0xx.h;Drivers/CMSIS/Device/ST/STM32G0xx/Source/Templates/system_stm32g0xx.c; + +[] +SourceFiles=;; + diff --git a/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Inc/main.h b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Inc/main.h new file mode 100644 index 0000000000000000000000000000000000000000..8e41b0243d6d644cc4a345697e2edfb25438967e --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Inc/main.h @@ -0,0 +1,82 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32g0xx_hal.h" +#include "stm32g0xx_ll_system.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim); + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define MCO_Pin GPIO_PIN_0 +#define MCO_GPIO_Port GPIOF +#define LED_GREEN_Pin GPIO_PIN_5 +#define LED_GREEN_GPIO_Port GPIOA +#define TMS_Pin GPIO_PIN_13 +#define TMS_GPIO_Port GPIOA +#define TCK_Pin GPIO_PIN_14 +#define TCK_GPIO_Port GPIOA +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Inc/stm32g0xx_hal_conf.h b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Inc/stm32g0xx_hal_conf.h new file mode 100644 index 0000000000000000000000000000000000000000..2b8cebd87e138130c56e4f36ac0f330efa9be647 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Inc/stm32g0xx_hal_conf.h @@ -0,0 +1,310 @@ +/** + ****************************************************************************** + * @file stm32g0xx_hal_conf.h + * @author MCD Application Team + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2018 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef STM32G0xx_HAL_CONF_H +#define STM32G0xx_HAL_CONF_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED + + #define HAL_ADC_MODULE_ENABLED +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_COMP_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_EXTI_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +#define HAL_IWDG_MODULE_ENABLED +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_RNG_MODULE_ENABLED */ +#define HAL_RTC_MODULE_ENABLED +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_SMBUS_MODULE_ENABLED */ +#define HAL_SPI_MODULE_ENABLED +#define HAL_TIM_MODULE_ENABLED +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +#define HAL_WWDG_MODULE_ENABLED +#define HAL_GPIO_MODULE_ENABLED +#define HAL_EXTI_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## Register Callbacks selection ############################## */ +/** + * @brief This is the list of modules where register callback can be used + */ +#define USE_HAL_ADC_REGISTER_CALLBACKS 0u +#define USE_HAL_CEC_REGISTER_CALLBACKS 0u +#define USE_HAL_COMP_REGISTER_CALLBACKS 0u +#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u +#define USE_HAL_DAC_REGISTER_CALLBACKS 0u +#define USE_HAL_I2C_REGISTER_CALLBACKS 0u +#define USE_HAL_I2S_REGISTER_CALLBACKS 0u +#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u +#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u +#define USE_HAL_RNG_REGISTER_CALLBACKS 0u +#define USE_HAL_RTC_REGISTER_CALLBACKS 0u +#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u +#define USE_HAL_SPI_REGISTER_CALLBACKS 0u +#define USE_HAL_TIM_REGISTER_CALLBACKS 0u +#define USE_HAL_UART_REGISTER_CALLBACKS 0u +#define USE_HAL_USART_REGISTER_CALLBACKS 0u +#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u + +/* ########################## Oscillator Values adaptation ####################*/ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) +#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) +#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) +#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) +#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz +The real value may vary depending on the variations +in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + * This value is used by the UART, RTC HAL module to compute the system frequency + */ +#if !defined (LSE_VALUE) +#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) +#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S1 peripheral + * This value is used by the RCC HAL module to compute the I2S1 clock source + * frequency. + */ +#if !defined (EXTERNAL_I2S1_CLOCK_VALUE) +#define EXTERNAL_I2S1_CLOCK_VALUE 12288000U /*!< Value of the I2S1 External clock source in Hz*/ +#endif /* EXTERNAL_I2S1_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE 3300U /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 0U + +/* ################## CRYP peripheral configuration ########################## */ + +#define USE_HAL_CRYP_SUSPEND_RESUME 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED +#include "stm32g0xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED +#include "stm32g0xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED +#include "stm32g0xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED +#include "stm32g0xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED +#include "stm32g0xx_hal_adc.h" +#include "stm32g0xx_hal_adc_ex.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED +#include "stm32g0xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_COMP_MODULE_ENABLED +#include "stm32g0xx_hal_comp.h" +#endif /* HAL_COMP_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED +#include "stm32g0xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED +#include "stm32g0xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED +#include "stm32g0xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED +#include "stm32g0xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED +#include "stm32g0xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED +#include "stm32g0xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED +#include "stm32g0xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED +#include "stm32g0xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED +#include "stm32g0xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED +#include "stm32g0xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED +#include "stm32g0xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED +#include "stm32g0xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED +#include "stm32g0xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED +#include "stm32g0xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_SMBUS_MODULE_ENABLED +#include "stm32g0xx_hal_smbus.h" +#endif /* HAL_SMBUS_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED +#include "stm32g0xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED +#include "stm32g0xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED +#include "stm32g0xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED +#include "stm32g0xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED +#include "stm32g0xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for functions parameters check. + * @param expr If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ +#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ +void assert_failed(uint8_t *file, uint32_t line); +#else +#define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* STM32G0xx_HAL_CONF_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Inc/stm32g0xx_it.h b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Inc/stm32g0xx_it.h new file mode 100644 index 0000000000000000000000000000000000000000..0149e0fd302449bee1051ae4d1fb63a7b0279a75 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Inc/stm32g0xx_it.h @@ -0,0 +1,65 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32g0xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32G0xx_IT_H +#define __STM32G0xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void SVC_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32G0xx_IT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Src/main.c b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Src/main.c new file mode 100644 index 0000000000000000000000000000000000000000..42a94e2849f613d6331dc663af39f903b9a38142 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Src/main.c @@ -0,0 +1,797 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +ADC_HandleTypeDef hadc1; + +IWDG_HandleTypeDef hiwdg; + +RTC_HandleTypeDef hrtc; + +SPI_HandleTypeDef hspi1; +SPI_HandleTypeDef hspi2; + +TIM_HandleTypeDef htim1; +TIM_HandleTypeDef htim3; + +UART_HandleTypeDef huart1; +UART_HandleTypeDef huart2; +UART_HandleTypeDef huart3; + +WWDG_HandleTypeDef hwwdg; + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +static void MX_GPIO_Init(void); +static void MX_USART2_UART_Init(void); +static void MX_ADC1_Init(void); +static void MX_IWDG_Init(void); +static void MX_SPI1_Init(void); +static void MX_SPI2_Init(void); +static void MX_TIM1_Init(void); +static void MX_TIM3_Init(void); +static void MX_USART1_UART_Init(void); +static void MX_USART3_UART_Init(void); +static void MX_RTC_Init(void); +static void MX_WWDG_Init(void); +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_USART2_UART_Init(); + MX_ADC1_Init(); + MX_IWDG_Init(); + MX_SPI1_Init(); + MX_SPI2_Init(); + MX_TIM1_Init(); + MX_TIM3_Init(); + MX_USART1_UART_Init(); + MX_USART3_UART_Init(); + MX_RTC_Init(); + MX_WWDG_Init(); + /* USER CODE BEGIN 2 */ + + /* USER CODE END 2 */ + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + /* USER CODE END WHILE */ + + /* USER CODE BEGIN 3 */ + } + /* USER CODE END 3 */ +} + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + + /** Configure the main internal regulator output voltage + */ + HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1); + /** Configure LSE Drive Capability + */ + HAL_PWR_EnableBkUpAccess(); + __HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_LOW); + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSI + |RCC_OSCILLATORTYPE_LSE; + RCC_OscInitStruct.LSEState = RCC_LSE_ON; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV1; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.LSIState = RCC_LSI_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1; + RCC_OscInitStruct.PLL.PLLN = 8; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) + { + Error_Handler(); + } + /** Initializes the peripherals clocks + */ + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_USART1 + |RCC_PERIPHCLK_USART2|RCC_PERIPHCLK_ADC; + PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK1; + PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1; + PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_SYSCLK; + PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; + + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + Error_Handler(); + } +} + +/** + * @brief ADC1 Initialization Function + * @param None + * @retval None + */ +static void MX_ADC1_Init(void) +{ + + /* USER CODE BEGIN ADC1_Init 0 */ + + /* USER CODE END ADC1_Init 0 */ + + ADC_AnalogWDGConfTypeDef AnalogWDGConfig = {0}; + ADC_ChannelConfTypeDef sConfig = {0}; + + /* USER CODE BEGIN ADC1_Init 1 */ + + /* USER CODE END ADC1_Init 1 */ + /** Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion) + */ + hadc1.Instance = ADC1; + hadc1.Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV2; + hadc1.Init.Resolution = ADC_RESOLUTION_12B; + hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT; + hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE; + hadc1.Init.EOCSelection = ADC_EOC_SINGLE_CONV; + hadc1.Init.LowPowerAutoWait = DISABLE; + hadc1.Init.LowPowerAutoPowerOff = DISABLE; + hadc1.Init.ContinuousConvMode = DISABLE; + hadc1.Init.NbrOfConversion = 1; + hadc1.Init.DiscontinuousConvMode = DISABLE; + hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START; + hadc1.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE; + hadc1.Init.DMAContinuousRequests = DISABLE; + hadc1.Init.Overrun = ADC_OVR_DATA_PRESERVED; + hadc1.Init.SamplingTimeCommon1 = ADC_SAMPLETIME_1CYCLE_5; + hadc1.Init.SamplingTimeCommon2 = ADC_SAMPLETIME_1CYCLE_5; + hadc1.Init.OversamplingMode = DISABLE; + hadc1.Init.TriggerFrequencyMode = ADC_TRIGGER_FREQ_HIGH; + if (HAL_ADC_Init(&hadc1) != HAL_OK) + { + Error_Handler(); + } + /** Configure Analog WatchDog 2 + */ + AnalogWDGConfig.WatchdogMode = ADC_ANALOGWATCHDOG_SINGLE_REG; + if (HAL_ADC_AnalogWDGConfig(&hadc1, &AnalogWDGConfig) != HAL_OK) + { + Error_Handler(); + } + /** Configure Regular Channel + */ + sConfig.Channel = ADC_CHANNEL_0; + sConfig.Rank = ADC_REGULAR_RANK_1; + sConfig.SamplingTime = ADC_SAMPLINGTIME_COMMON_1; + if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN ADC1_Init 2 */ + + /* USER CODE END ADC1_Init 2 */ + +} + +/** + * @brief IWDG Initialization Function + * @param None + * @retval None + */ +static void MX_IWDG_Init(void) +{ + + /* USER CODE BEGIN IWDG_Init 0 */ + + /* USER CODE END IWDG_Init 0 */ + + /* USER CODE BEGIN IWDG_Init 1 */ + + /* USER CODE END IWDG_Init 1 */ + hiwdg.Instance = IWDG; + hiwdg.Init.Prescaler = IWDG_PRESCALER_4; + hiwdg.Init.Window = 4095; + hiwdg.Init.Reload = 4095; + if (HAL_IWDG_Init(&hiwdg) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN IWDG_Init 2 */ + + /* USER CODE END IWDG_Init 2 */ + +} + +/** + * @brief RTC Initialization Function + * @param None + * @retval None + */ +static void MX_RTC_Init(void) +{ + + /* USER CODE BEGIN RTC_Init 0 */ + + /* USER CODE END RTC_Init 0 */ + + RTC_TimeTypeDef sTime = {0}; + RTC_DateTypeDef sDate = {0}; + + /* USER CODE BEGIN RTC_Init 1 */ + + /* USER CODE END RTC_Init 1 */ + /** Initialize RTC Only + */ + hrtc.Instance = RTC; + hrtc.Init.HourFormat = RTC_HOURFORMAT_24; + hrtc.Init.AsynchPrediv = 127; + hrtc.Init.SynchPrediv = 255; + hrtc.Init.OutPut = RTC_OUTPUT_DISABLE; + hrtc.Init.OutPutRemap = RTC_OUTPUT_REMAP_NONE; + hrtc.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; + hrtc.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; + hrtc.Init.OutPutPullUp = RTC_OUTPUT_PULLUP_NONE; + if (HAL_RTC_Init(&hrtc) != HAL_OK) + { + Error_Handler(); + } + + /* USER CODE BEGIN Check_RTC_BKUP */ + + /* USER CODE END Check_RTC_BKUP */ + + /** Initialize RTC and set the Time and Date + */ + sTime.Hours = 0x0; + sTime.Minutes = 0x0; + sTime.Seconds = 0x0; + sTime.SubSeconds = 0x0; + sTime.DayLightSaving = RTC_DAYLIGHTSAVING_NONE; + sTime.StoreOperation = RTC_STOREOPERATION_RESET; + if (HAL_RTC_SetTime(&hrtc, &sTime, RTC_FORMAT_BCD) != HAL_OK) + { + Error_Handler(); + } + sDate.WeekDay = RTC_WEEKDAY_MONDAY; + sDate.Month = RTC_MONTH_JANUARY; + sDate.Date = 0x1; + sDate.Year = 0x0; + + if (HAL_RTC_SetDate(&hrtc, &sDate, RTC_FORMAT_BCD) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN RTC_Init 2 */ + + /* USER CODE END RTC_Init 2 */ + +} + +/** + * @brief SPI1 Initialization Function + * @param None + * @retval None + */ +static void MX_SPI1_Init(void) +{ + + /* USER CODE BEGIN SPI1_Init 0 */ + + /* USER CODE END SPI1_Init 0 */ + + /* USER CODE BEGIN SPI1_Init 1 */ + + /* USER CODE END SPI1_Init 1 */ + /* SPI1 parameter configuration*/ + hspi1.Instance = SPI1; + hspi1.Init.Mode = SPI_MODE_MASTER; + hspi1.Init.Direction = SPI_DIRECTION_2LINES; + hspi1.Init.DataSize = SPI_DATASIZE_4BIT; + hspi1.Init.CLKPolarity = SPI_POLARITY_LOW; + hspi1.Init.CLKPhase = SPI_PHASE_1EDGE; + hspi1.Init.NSS = SPI_NSS_SOFT; + hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; + hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB; + hspi1.Init.TIMode = SPI_TIMODE_DISABLE; + hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; + hspi1.Init.CRCPolynomial = 7; + hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE; + hspi1.Init.NSSPMode = SPI_NSS_PULSE_ENABLE; + if (HAL_SPI_Init(&hspi1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN SPI1_Init 2 */ + + /* USER CODE END SPI1_Init 2 */ + +} + +/** + * @brief SPI2 Initialization Function + * @param None + * @retval None + */ +static void MX_SPI2_Init(void) +{ + + /* USER CODE BEGIN SPI2_Init 0 */ + + /* USER CODE END SPI2_Init 0 */ + + /* USER CODE BEGIN SPI2_Init 1 */ + + /* USER CODE END SPI2_Init 1 */ + /* SPI2 parameter configuration*/ + hspi2.Instance = SPI2; + hspi2.Init.Mode = SPI_MODE_MASTER; + hspi2.Init.Direction = SPI_DIRECTION_2LINES; + hspi2.Init.DataSize = SPI_DATASIZE_4BIT; + hspi2.Init.CLKPolarity = SPI_POLARITY_LOW; + hspi2.Init.CLKPhase = SPI_PHASE_1EDGE; + hspi2.Init.NSS = SPI_NSS_SOFT; + hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; + hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB; + hspi2.Init.TIMode = SPI_TIMODE_DISABLE; + hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; + hspi2.Init.CRCPolynomial = 7; + hspi2.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE; + hspi2.Init.NSSPMode = SPI_NSS_PULSE_ENABLE; + if (HAL_SPI_Init(&hspi2) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN SPI2_Init 2 */ + + /* USER CODE END SPI2_Init 2 */ + +} + +/** + * @brief TIM1 Initialization Function + * @param None + * @retval None + */ +static void MX_TIM1_Init(void) +{ + + /* USER CODE BEGIN TIM1_Init 0 */ + + /* USER CODE END TIM1_Init 0 */ + + TIM_ClockConfigTypeDef sClockSourceConfig = {0}; + TIM_MasterConfigTypeDef sMasterConfig = {0}; + TIM_BreakDeadTimeConfigTypeDef sBreakDeadTimeConfig = {0}; + + /* USER CODE BEGIN TIM1_Init 1 */ + + /* USER CODE END TIM1_Init 1 */ + htim1.Instance = TIM1; + htim1.Init.Prescaler = 0; + htim1.Init.CounterMode = TIM_COUNTERMODE_UP; + htim1.Init.Period = 0; + htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; + htim1.Init.RepetitionCounter = 0; + htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; + if (HAL_TIM_Base_Init(&htim1) != HAL_OK) + { + Error_Handler(); + } + sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL; + if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK) + { + Error_Handler(); + } + sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET; + sMasterConfig.MasterOutputTrigger2 = TIM_TRGO2_RESET; + sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE; + if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK) + { + Error_Handler(); + } + sBreakDeadTimeConfig.BreakAFMode = TIM_BREAK_AFMODE_INPUT; + sBreakDeadTimeConfig.Break2AFMode = TIM_BREAK_AFMODE_INPUT; + if (HAL_TIMEx_ConfigBreakDeadTime(&htim1, &sBreakDeadTimeConfig) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN TIM1_Init 2 */ + + /* USER CODE END TIM1_Init 2 */ + +} + +/** + * @brief TIM3 Initialization Function + * @param None + * @retval None + */ +static void MX_TIM3_Init(void) +{ + + /* USER CODE BEGIN TIM3_Init 0 */ + + /* USER CODE END TIM3_Init 0 */ + + TIM_ClockConfigTypeDef sClockSourceConfig = {0}; + TIM_MasterConfigTypeDef sMasterConfig = {0}; + TIM_OC_InitTypeDef sConfigOC = {0}; + + /* USER CODE BEGIN TIM3_Init 1 */ + + /* USER CODE END TIM3_Init 1 */ + htim3.Instance = TIM3; + htim3.Init.Prescaler = 0; + htim3.Init.CounterMode = TIM_COUNTERMODE_UP; + htim3.Init.Period = 0; + htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1; + htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; + if (HAL_TIM_Base_Init(&htim3) != HAL_OK) + { + Error_Handler(); + } + sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL; + if (HAL_TIM_ConfigClockSource(&htim3, &sClockSourceConfig) != HAL_OK) + { + Error_Handler(); + } + if (HAL_TIM_PWM_Init(&htim3) != HAL_OK) + { + Error_Handler(); + } + if (HAL_TIM_OC_Init(&htim3) != HAL_OK) + { + Error_Handler(); + } + sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET; + sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE; + if (HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig) != HAL_OK) + { + Error_Handler(); + } + sConfigOC.OCMode = TIM_OCMODE_PWM1; + sConfigOC.Pulse = 0; + sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH; + sConfigOC.OCFastMode = TIM_OCFAST_DISABLE; + if (HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_1) != HAL_OK) + { + Error_Handler(); + } + sConfigOC.OCMode = TIM_OCMODE_TIMING; + if (HAL_TIM_OC_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_2) != HAL_OK) + { + Error_Handler(); + } + if (HAL_TIM_OC_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_3) != HAL_OK) + { + Error_Handler(); + } + if (HAL_TIM_OC_ConfigChannel(&htim3, &sConfigOC, TIM_CHANNEL_4) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN TIM3_Init 2 */ + + /* USER CODE END TIM3_Init 2 */ + HAL_TIM_MspPostInit(&htim3); + +} + +/** + * @brief USART1 Initialization Function + * @param None + * @retval None + */ +static void MX_USART1_UART_Init(void) +{ + + /* USER CODE BEGIN USART1_Init 0 */ + + /* USER CODE END USART1_Init 0 */ + + /* USER CODE BEGIN USART1_Init 1 */ + + /* USER CODE END USART1_Init 1 */ + huart1.Instance = USART1; + huart1.Init.BaudRate = 115200; + huart1.Init.WordLength = UART_WORDLENGTH_8B; + huart1.Init.StopBits = UART_STOPBITS_1; + huart1.Init.Parity = UART_PARITY_NONE; + huart1.Init.Mode = UART_MODE_TX_RX; + huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart1.Init.OverSampling = UART_OVERSAMPLING_16; + huart1.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + huart1.Init.ClockPrescaler = UART_PRESCALER_DIV1; + huart1.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + if (HAL_UART_Init(&huart1) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetTxFifoThreshold(&huart1, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetRxFifoThreshold(&huart1, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_DisableFifoMode(&huart1) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART1_Init 2 */ + + /* USER CODE END USART1_Init 2 */ + +} + +/** + * @brief USART2 Initialization Function + * @param None + * @retval None + */ +static void MX_USART2_UART_Init(void) +{ + + /* USER CODE BEGIN USART2_Init 0 */ + + /* USER CODE END USART2_Init 0 */ + + /* USER CODE BEGIN USART2_Init 1 */ + + /* USER CODE END USART2_Init 1 */ + huart2.Instance = USART2; + huart2.Init.BaudRate = 115200; + huart2.Init.WordLength = UART_WORDLENGTH_7B; + huart2.Init.StopBits = UART_STOPBITS_1; + huart2.Init.Parity = UART_PARITY_NONE; + huart2.Init.Mode = UART_MODE_TX_RX; + huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart2.Init.OverSampling = UART_OVERSAMPLING_16; + huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + huart2.Init.ClockPrescaler = UART_PRESCALER_DIV1; + huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + if (HAL_UART_Init(&huart2) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetTxFifoThreshold(&huart2, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_SetRxFifoThreshold(&huart2, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK) + { + Error_Handler(); + } + if (HAL_UARTEx_DisableFifoMode(&huart2) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART2_Init 2 */ + + /* USER CODE END USART2_Init 2 */ + +} + +/** + * @brief USART3 Initialization Function + * @param None + * @retval None + */ +static void MX_USART3_UART_Init(void) +{ + + /* USER CODE BEGIN USART3_Init 0 */ + + /* USER CODE END USART3_Init 0 */ + + /* USER CODE BEGIN USART3_Init 1 */ + + /* USER CODE END USART3_Init 1 */ + huart3.Instance = USART3; + huart3.Init.BaudRate = 115200; + huart3.Init.WordLength = UART_WORDLENGTH_8B; + huart3.Init.StopBits = UART_STOPBITS_1; + huart3.Init.Parity = UART_PARITY_NONE; + huart3.Init.Mode = UART_MODE_TX_RX; + huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart3.Init.OverSampling = UART_OVERSAMPLING_16; + huart3.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE; + huart3.Init.ClockPrescaler = UART_PRESCALER_DIV1; + huart3.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT; + if (HAL_UART_Init(&huart3) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART3_Init 2 */ + + /* USER CODE END USART3_Init 2 */ + +} + +/** + * @brief WWDG Initialization Function + * @param None + * @retval None + */ +static void MX_WWDG_Init(void) +{ + + /* USER CODE BEGIN WWDG_Init 0 */ + + /* USER CODE END WWDG_Init 0 */ + + /* USER CODE BEGIN WWDG_Init 1 */ + + /* USER CODE END WWDG_Init 1 */ + hwwdg.Instance = WWDG; + hwwdg.Init.Prescaler = WWDG_PRESCALER_1; + hwwdg.Init.Window = 64; + hwwdg.Init.Counter = 64; + hwwdg.Init.EWIMode = WWDG_EWI_DISABLE; + if (HAL_WWDG_Init(&hwwdg) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN WWDG_Init 2 */ + + /* USER CODE END WWDG_Init 2 */ + +} + +/** + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOF_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(LED_GREEN_GPIO_Port, LED_GREEN_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin : LED_GREEN_Pin */ + GPIO_InitStruct.Pin = LED_GREEN_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + HAL_GPIO_Init(LED_GREEN_GPIO_Port, &GPIO_InitStruct); + +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_hal_msp.c b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_hal_msp.c new file mode 100644 index 0000000000000000000000000000000000000000..7c05429633538bb36231def501cb521e843f6561 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_hal_msp.c @@ -0,0 +1,598 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * File Name : stm32g0xx_hal_msp.c + * Description : This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim); + /** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/** +* @brief ADC MSP Initialization +* This function configures the hardware resources used in this example +* @param hadc: ADC handle pointer +* @retval None +*/ +void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(hadc->Instance==ADC1) + { + /* USER CODE BEGIN ADC1_MspInit 0 */ + + /* USER CODE END ADC1_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_ADC_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**ADC1 GPIO Configuration + PA0 ------> ADC1_IN0 + */ + GPIO_InitStruct.Pin = GPIO_PIN_0; + GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN ADC1_MspInit 1 */ + + /* USER CODE END ADC1_MspInit 1 */ + } + +} + +/** +* @brief ADC MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hadc: ADC handle pointer +* @retval None +*/ +void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc) +{ + if(hadc->Instance==ADC1) + { + /* USER CODE BEGIN ADC1_MspDeInit 0 */ + + /* USER CODE END ADC1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_ADC_CLK_DISABLE(); + + /**ADC1 GPIO Configuration + PA0 ------> ADC1_IN0 + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_0); + + /* USER CODE BEGIN ADC1_MspDeInit 1 */ + + /* USER CODE END ADC1_MspDeInit 1 */ + } + +} + +/** +* @brief RTC MSP Initialization +* This function configures the hardware resources used in this example +* @param hrtc: RTC handle pointer +* @retval None +*/ +void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc) +{ + if(hrtc->Instance==RTC) + { + /* USER CODE BEGIN RTC_MspInit 0 */ + + /* USER CODE END RTC_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_RTC_ENABLE(); + __HAL_RCC_RTCAPB_CLK_ENABLE(); + /* USER CODE BEGIN RTC_MspInit 1 */ + + /* USER CODE END RTC_MspInit 1 */ + } + +} + +/** +* @brief RTC MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hrtc: RTC handle pointer +* @retval None +*/ +void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc) +{ + if(hrtc->Instance==RTC) + { + /* USER CODE BEGIN RTC_MspDeInit 0 */ + + /* USER CODE END RTC_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_RTC_DISABLE(); + __HAL_RCC_RTCAPB_CLK_DISABLE(); + /* USER CODE BEGIN RTC_MspDeInit 1 */ + + /* USER CODE END RTC_MspDeInit 1 */ + } + +} + +/** +* @brief SPI MSP Initialization +* This function configures the hardware resources used in this example +* @param hspi: SPI handle pointer +* @retval None +*/ +void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(hspi->Instance==SPI1) + { + /* USER CODE BEGIN SPI1_MspInit 0 */ + + /* USER CODE END SPI1_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_SPI1_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**SPI1 GPIO Configuration + PA1 ------> SPI1_SCK + PA11 [PA9] ------> SPI1_MISO + PA12 [PA10] ------> SPI1_MOSI + */ + GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_11|GPIO_PIN_12; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF0_SPI1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN SPI1_MspInit 1 */ + + /* USER CODE END SPI1_MspInit 1 */ + } + else if(hspi->Instance==SPI2) + { + /* USER CODE BEGIN SPI2_MspInit 0 */ + + /* USER CODE END SPI2_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_SPI2_CLK_ENABLE(); + + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**SPI2 GPIO Configuration + PC2 ------> SPI2_MISO + PC3 ------> SPI2_MOSI + PB10 ------> SPI2_SCK + */ + GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF1_SPI2; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF5_SPI2; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* USER CODE BEGIN SPI2_MspInit 1 */ + + /* USER CODE END SPI2_MspInit 1 */ + } + +} + +/** +* @brief SPI MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hspi: SPI handle pointer +* @retval None +*/ +void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi) +{ + if(hspi->Instance==SPI1) + { + /* USER CODE BEGIN SPI1_MspDeInit 0 */ + + /* USER CODE END SPI1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_SPI1_CLK_DISABLE(); + + /**SPI1 GPIO Configuration + PA1 ------> SPI1_SCK + PA11 [PA9] ------> SPI1_MISO + PA12 [PA10] ------> SPI1_MOSI + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1|GPIO_PIN_11|GPIO_PIN_12); + + /* USER CODE BEGIN SPI1_MspDeInit 1 */ + + /* USER CODE END SPI1_MspDeInit 1 */ + } + else if(hspi->Instance==SPI2) + { + /* USER CODE BEGIN SPI2_MspDeInit 0 */ + + /* USER CODE END SPI2_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_SPI2_CLK_DISABLE(); + + /**SPI2 GPIO Configuration + PC2 ------> SPI2_MISO + PC3 ------> SPI2_MOSI + PB10 ------> SPI2_SCK + */ + HAL_GPIO_DeInit(GPIOC, GPIO_PIN_2|GPIO_PIN_3); + + HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10); + + /* USER CODE BEGIN SPI2_MspDeInit 1 */ + + /* USER CODE END SPI2_MspDeInit 1 */ + } + +} + +/** +* @brief TIM_Base MSP Initialization +* This function configures the hardware resources used in this example +* @param htim_base: TIM_Base handle pointer +* @retval None +*/ +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base) +{ + if(htim_base->Instance==TIM1) + { + /* USER CODE BEGIN TIM1_MspInit 0 */ + + /* USER CODE END TIM1_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_TIM1_CLK_ENABLE(); + /* USER CODE BEGIN TIM1_MspInit 1 */ + + /* USER CODE END TIM1_MspInit 1 */ + } + else if(htim_base->Instance==TIM3) + { + /* USER CODE BEGIN TIM3_MspInit 0 */ + + /* USER CODE END TIM3_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_TIM3_CLK_ENABLE(); + /* USER CODE BEGIN TIM3_MspInit 1 */ + + /* USER CODE END TIM3_MspInit 1 */ + } + +} + +void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(htim->Instance==TIM3) + { + /* USER CODE BEGIN TIM3_MspPostInit 0 */ + + /* USER CODE END TIM3_MspPostInit 0 */ + + __HAL_RCC_GPIOA_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**TIM3 GPIO Configuration + PA6 ------> TIM3_CH1 + PA7 ------> TIM3_CH2 + PB0 ------> TIM3_CH3 + PB1 ------> TIM3_CH4 + */ + GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF1_TIM3; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF1_TIM3; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* USER CODE BEGIN TIM3_MspPostInit 1 */ + + /* USER CODE END TIM3_MspPostInit 1 */ + } + +} +/** +* @brief TIM_Base MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param htim_base: TIM_Base handle pointer +* @retval None +*/ +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base) +{ + if(htim_base->Instance==TIM1) + { + /* USER CODE BEGIN TIM1_MspDeInit 0 */ + + /* USER CODE END TIM1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_TIM1_CLK_DISABLE(); + /* USER CODE BEGIN TIM1_MspDeInit 1 */ + + /* USER CODE END TIM1_MspDeInit 1 */ + } + else if(htim_base->Instance==TIM3) + { + /* USER CODE BEGIN TIM3_MspDeInit 0 */ + + /* USER CODE END TIM3_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_TIM3_CLK_DISABLE(); + /* USER CODE BEGIN TIM3_MspDeInit 1 */ + + /* USER CODE END TIM3_MspDeInit 1 */ + } + +} + +/** +* @brief UART MSP Initialization +* This function configures the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspInit 0 */ + + /* USER CODE END USART1_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USART1_CLK_ENABLE(); + + __HAL_RCC_GPIOC_CLK_ENABLE(); + /**USART1 GPIO Configuration + PC4 ------> USART1_TX + PC5 ------> USART1_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF1_USART1; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + /* USER CODE BEGIN USART1_MspInit 1 */ + + /* USER CODE END USART1_MspInit 1 */ + } + else if(huart->Instance==USART2) + { + /* USER CODE BEGIN USART2_MspInit 0 */ + + /* USER CODE END USART2_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USART2_CLK_ENABLE(); + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF1_USART2; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + /* USER CODE BEGIN USART2_MspInit 1 */ + + /* USER CODE END USART2_MspInit 1 */ + } + else if(huart->Instance==USART3) + { + /* USER CODE BEGIN USART3_MspInit 0 */ + + /* USER CODE END USART3_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USART3_CLK_ENABLE(); + + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + /**USART3 GPIO Configuration + PC11 ------> USART3_RX + PB2 ------> USART3_TX + */ + GPIO_InitStruct.Pin = GPIO_PIN_11; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF0_USART3; + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = GPIO_PIN_2; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF4_USART3; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /* USER CODE BEGIN USART3_MspInit 1 */ + + /* USER CODE END USART3_MspInit 1 */ + } + +} + +/** +* @brief UART MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + if(huart->Instance==USART1) + { + /* USER CODE BEGIN USART1_MspDeInit 0 */ + + /* USER CODE END USART1_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART1_CLK_DISABLE(); + + /**USART1 GPIO Configuration + PC4 ------> USART1_TX + PC5 ------> USART1_RX + */ + HAL_GPIO_DeInit(GPIOC, GPIO_PIN_4|GPIO_PIN_5); + + /* USER CODE BEGIN USART1_MspDeInit 1 */ + + /* USER CODE END USART1_MspDeInit 1 */ + } + else if(huart->Instance==USART2) + { + /* USER CODE BEGIN USART2_MspDeInit 0 */ + + /* USER CODE END USART2_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART2_CLK_DISABLE(); + + /**USART2 GPIO Configuration + PA2 ------> USART2_TX + PA3 ------> USART2_RX + */ + HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3); + + /* USER CODE BEGIN USART2_MspDeInit 1 */ + + /* USER CODE END USART2_MspDeInit 1 */ + } + else if(huart->Instance==USART3) + { + /* USER CODE BEGIN USART3_MspDeInit 0 */ + + /* USER CODE END USART3_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART3_CLK_DISABLE(); + + /**USART3 GPIO Configuration + PC11 ------> USART3_RX + PB2 ------> USART3_TX + */ + HAL_GPIO_DeInit(GPIOC, GPIO_PIN_11); + + HAL_GPIO_DeInit(GPIOB, GPIO_PIN_2); + + /* USER CODE BEGIN USART3_MspDeInit 1 */ + + /* USER CODE END USART3_MspDeInit 1 */ + } + +} + +/** +* @brief WWDG MSP Initialization +* This function configures the hardware resources used in this example +* @param hwwdg: WWDG handle pointer +* @retval None +*/ +void HAL_WWDG_MspInit(WWDG_HandleTypeDef* hwwdg) +{ + if(hwwdg->Instance==WWDG) + { + /* USER CODE BEGIN WWDG_MspInit 0 */ + + /* USER CODE END WWDG_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_WWDG_CLK_ENABLE(); + /* USER CODE BEGIN WWDG_MspInit 1 */ + + /* USER CODE END WWDG_MspInit 1 */ + } + +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_it.c b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_it.c new file mode 100644 index 0000000000000000000000000000000000000000..5d2ca523b1d0da590a53fdf48cf01b9a0a8c3ddd --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/Src/stm32g0xx_it.c @@ -0,0 +1,145 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32g0xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * @attention + * + *

© Copyright (c) 2020 STMicroelectronics. + * All rights reserved.

+ * + * This software component is licensed by ST under BSD 3-Clause license, + * the "License"; You may not use this file except in compliance with the + * License. You may obtain a copy of the License at: + * opensource.org/licenses/BSD-3-Clause + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32g0xx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ + +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex-M0+ Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVC_IRQn 0 */ + + /* USER CODE END SVC_IRQn 0 */ + /* USER CODE BEGIN SVC_IRQn 1 */ + + /* USER CODE END SVC_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32G0xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32g0xx.s). */ +/******************************************************************************/ + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/stm32g070rbt6.ioc b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/stm32g070rbt6.ioc new file mode 100644 index 0000000000000000000000000000000000000000..353d97411cb71613772a2785b9b796fbcdc1eb32 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/CubeMX_Config/stm32g070rbt6.ioc @@ -0,0 +1,247 @@ +#MicroXplorer Configuration settings - do not modify +Mcu.Family=STM32G0 +PC3.Mode=Full_Duplex_Master +ProjectManager.MainLocation=Src +PA2.GPIO_PuPd=GPIO_PULLUP +PA11\ [PA9].Mode=Full_Duplex_Master +RCC.USART1Freq_Value=64000000 +USART2.IPParameters=VirtualMode-Asynchronous,WordLength +RCC.CortexFreq_Value=64000000 +ProjectManager.KeepUserCode=true +Mcu.UserName=STM32G070RBTx +SPI1.VirtualType=VM_MASTER +SPI2.VirtualType=VM_MASTER +PB10.Mode=Full_Duplex_Master +TIM3.Channel-Output\ Compare3\ CH3=TIM_CHANNEL_3 +PA12\ [PA10].Mode=Full_Duplex_Master +VP_IWDG_VS_IWDG.Mode=IWDG_Activate +PA3.GPIO_PuPd=GPIO_PULLUP +PA14-BOOT0.Mode=Serial_Wire +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART2_UART_Init-USART2-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_IWDG_Init-IWDG-false-HAL-true,6-MX_SPI1_Init-SPI1-false-HAL-true,7-MX_SPI2_Init-SPI2-false-HAL-true,8-MX_TIM1_Init-TIM1-false-HAL-true,9-MX_TIM3_Init-TIM3-false-HAL-true,10-MX_USART1_UART_Init-USART1-false-HAL-true,11-MX_USART3_UART_Init-USART3-false-HAL-true +VP_RTC_VS_RTC_Activate.Mode=RTC_Enabled +RCC.RTCFreq_Value=32768 +PA3.GPIOParameters=GPIO_PuPd +RCC.USART2Freq_Value=64000000 +VP_RTC_VS_RTC_Calendar.Signal=RTC_VS_RTC_Calendar +PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator +NVIC.SVC_IRQn=true\:0\:0\:false\:false\:true\:false\:false +PC5.Mode=Asynchronous +USART1.IPParameters=VirtualMode-Asynchronous +PF0-OSC_IN\ (PF0).GPIO_Label=MCO +PA2.GPIOParameters=GPIO_PuPd +PinOutPanel.RotationAngle=0 +PF0-OSC_IN\ (PF0).Signal=RCC_OSC_IN +RCC.MCO1PinFreq_Value=64000000 +RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK +ProjectManager.StackSize=0x400 +PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator +USART3.VirtualMode-Asynchronous=VM_ASYNC +RCC.LPTIM1Freq_Value=16000000 +Mcu.IP4=RTC +RCC.FCLKCortexFreq_Value=64000000 +Mcu.IP5=SPI1 +Mcu.IP2=NVIC +Mcu.IP3=RCC +Mcu.IP0=ADC1 +Mcu.IP1=IWDG +Mcu.UserConstants= +SH.S_TIM3_CH2.ConfNb=1 +PA14-BOOT0.GPIOParameters=GPIO_Label +Mcu.ThirdPartyNb=0 +SPI1.Direction=SPI_DIRECTION_2LINES +RCC.HCLKFreq_Value=64000000 +PA12\ [PA10].Signal=SPI1_MOSI +Mcu.IPNb=14 +ProjectManager.PreviousToolchain= +SPI1.CalculateBaudRate=32.0 MBits/s +PC3.Signal=SPI2_MOSI +Mcu.Pin6=PC3 +Mcu.Pin7=PA0 +Mcu.Pin8=PA1 +Mcu.Pin9=PA2 +RCC.AHBFreq_Value=64000000 +PF0-OSC_IN\ (PF0).Locked=true +Mcu.Pin0=PC11 +Mcu.Pin1=PC13 +PA14-BOOT0.Signal=SYS_SWCLK +TIM3.Channel-PWM\ Generation1\ CH1=TIM_CHANNEL_1 +Mcu.Pin2=PC14-OSC32_IN (PC14) +Mcu.Pin3=PC15-OSC32_OUT (PC15) +Mcu.Pin4=PF0-OSC_IN (PF0) +Mcu.Pin5=PC2 +ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_0 +ProjectManager.ProjectBuild=false +RCC.HSE_VALUE=8000000 +PB2.Signal=USART3_TX +Mcu.IP10=USART1 +USART2.VirtualMode-Asynchronous=VM_ASYNC +NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true +RCC.RTCClockSelection=RCC_RTCCLKSOURCE_LSE +Mcu.IP12=USART3 +Mcu.IP11=USART2 +ProjectManager.FirmwarePackage=STM32Cube FW_G0 V1.3.0 +MxDb.Version=DB.5.0.60 +Mcu.IP13=WWDG +ProjectManager.BackupPrevious=false +RCC.VCOInputFreq_Value=16000000 +File.Version=6 +PA0.Mode=IN0 +SPI2.CalculateBaudRate=32.0 MBits/s +VP_SYS_VS_DBSignals.Mode=DisableDeadBatterySignals +RCC.PLLRCLKFreq_Value=64000000 +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false +SH.S_TIM3_CH1.0=TIM3_CH1,PWM Generation1 CH1 +ProjectManager.HalAssertFull=false +VP_TIM1_VS_ClockSourceINT.Mode=Internal +ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLINGTIME_COMMON_1 +ProjectManager.ProjectName=stm32g070rbt6 +PA0.Signal=ADC1_IN0 +RCC.TIM1Freq_Value=16000000 +PA13.GPIOParameters=GPIO_Label +Mcu.Package=LQFP64 +PB1.Signal=S_TIM3_CH4 +PA6.Signal=S_TIM3_CH1 +RCC.TIM15Freq_Value=16000000 +PA5.Locked=true +SPI2.Mode=SPI_MODE_MASTER +RCC.APBFreq_Value=64000000 +ProjectManager.ToolChainLocation= +RCC.LSI_VALUE=32000 +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +RCC.LSCOPinFreq_Value=32000 +USART3.IPParameters=VirtualMode-Asynchronous +VP_RTC_VS_RTC_Calendar.Mode=RTC_Calendar +PA5.GPIOParameters=GPIO_Speed,GPIO_Label +PC11.Mode=Asynchronous +USART2.WordLength=WORDLENGTH_7B +PC14-OSC32_IN\ (PC14).Locked=true +RCC.PLLPoutputFreq_Value=64000000 +RCC.CECFreq_Value=32786.88524590164 +RCC.LPUART1Freq_Value=16000000 +SPI2.Direction=SPI_DIRECTION_2LINES +PC5.Signal=USART1_RX +TIM3.Channel-Output\ Compare2\ CH2=TIM_CHANNEL_2 +ProjectManager.CustomerFirmwarePackage= +VP_TIM3_VS_ClockSourceINT.Mode=Internal +PC4.Mode=Asynchronous +PA3.Signal=USART2_RX +VP_WWDG_VS_WWDG.Signal=WWDG_VS_WWDG +PA2.Locked=true +VP_RTC_VS_RTC_Activate.Signal=RTC_VS_RTC_Activate +RCC.PLLQoutputFreq_Value=64000000 +ProjectManager.ProjectFileName=stm32g070rbt6.ioc +PA14-BOOT0.GPIO_Label=TCK +ADC1.Rank-0\#ChannelRegularConversion=1 +Mcu.PinsNb=32 +ProjectManager.NoMain=false +SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate +ADC1.IPParameters=Rank-0\#ChannelRegularConversion,master,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag +PC13.Locked=true +PC13.Signal=SYS_WKUP2 +PC11.Signal=USART3_RX +PC2.Signal=SPI2_MISO +PC4.Signal=USART1_TX +RCC.EXTERNAL_CLOCK_VALUE=12288000 +ProjectManager.DefaultFWLocation=true +PC2.Mode=Full_Duplex_Master +PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT +ProjectManager.DeletePrevious=true +boardIOC=true +SH.S_TIM3_CH3.0=TIM3_CH3,Output Compare3 CH3 +RCC.FamilyName=M +PF0-OSC_IN\ (PF0).Mode=HSE-External-Clock-Source +USART1.VirtualMode-Asynchronous=VM_ASYNC +PA13.Signal=SYS_SWDIO +PA3.Mode=Asynchronous +ProjectManager.TargetToolchain=Makefile +SH.S_TIM3_CH3.ConfNb=1 +VP_TIM1_VS_ClockSourceINT.Signal=TIM1_VS_ClockSourceINT +RCC.I2S1Freq_Value=64000000 +SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate +PC15-OSC32_OUT\ (PC15).Locked=true +VP_TIM3_VS_ClockSourceINT.Signal=TIM3_VS_ClockSourceINT +PA1.Signal=SPI1_SCK +PB10.Signal=SPI2_SCK +PA5.Signal=GPIO_Output +SH.S_TIM3_CH2.0=TIM3_CH2,Output Compare2 CH2 +board=NUCLEO-G070RB +RCC.VCOOutputFreq_Value=128000000 +ProjectManager.LastFirmware=true +PA1.Mode=Full_Duplex_Master +MxCube.Version=5.6.1 +RCC.I2C1Freq_Value=64000000 +SPI1.Mode=SPI_MODE_MASTER +VP_SYS_VS_DBSignals.Signal=SYS_VS_DBSignals +Mcu.Pin30=VP_TIM3_VS_ClockSourceINT +RCC.ADCFreq_Value=64000000 +VP_SYS_VS_Systick.Mode=SysTick +TIM3.IPParameters=Channel-Output Compare2 CH2,Channel-Output Compare3 CH3,Channel-Output Compare4 CH4,Channel-PWM Generation1 CH1 +Mcu.Pin31=VP_WWDG_VS_WWDG +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false +PC13.Mode=SYS_WakeUp1 +PA13.Mode=Serial_Wire +ProjectManager.FreePins=false +RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APBFreq_Value,APBTimFreq_Value,CECFreq_Value,CortexFreq_Value,EXTERNAL_CLOCK_VALUE,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2S1Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PWRFreq_Value,RTCClockSelection,RTCFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,TIM15Freq_Value,TIM1Freq_Value,USART1Freq_Value,USART2Freq_Value,VCOInputFreq_Value,VCOOutputFreq_Value +ProjectManager.AskForMigrate=true +Mcu.Name=STM32G070RBTx +PA11\ [PA9].Signal=SPI1_MISO +RCC.LPTIM2Freq_Value=16000000 +Mcu.Pin26=VP_RTC_VS_RTC_Calendar +PA14-BOOT0.Locked=true +Mcu.Pin27=VP_SYS_VS_Systick +PA2.Signal=USART2_TX +PA13.GPIO_Label=TMS +Mcu.Pin24=VP_IWDG_VS_IWDG +ProjectManager.UnderRoot=false +Mcu.Pin25=VP_RTC_VS_RTC_Activate +TIM3.Channel-Output\ Compare4\ CH4=TIM_CHANNEL_4 +Mcu.IP8=TIM1 +Mcu.IP9=TIM3 +Mcu.Pin28=VP_SYS_VS_DBSignals +Mcu.IP6=SPI2 +Mcu.Pin29=VP_TIM1_VS_ClockSourceINT +Mcu.IP7=SYS +ProjectManager.CoupleFile=false +RCC.APBTimFreq_Value=64000000 +RCC.SYSCLKFreq_VALUE=64000000 +Mcu.Pin22=PA13 +Mcu.Pin23=PA14-BOOT0 +Mcu.Pin20=PA11 [PA9] +ADC1.master=1 +Mcu.Pin21=PA12 [PA10] +PA3.Locked=true +PA5.GPIO_Label=LED_GREEN +NVIC.ForceEnableDMAVector=true +KeepUserPlacement=false +PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN +PB2.Mode=Asynchronous +PA13.Locked=true +ProjectManager.CompilerOptimize=6 +VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG +ProjectManager.HeapSize=0x200 +Mcu.Pin15=PC5 +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false +Mcu.Pin16=PB0 +Mcu.Pin13=PA7 +Mcu.Pin14=PC4 +VP_WWDG_VS_WWDG.Mode=WWDG_Activate +Mcu.Pin19=PB10 +SH.S_TIM3_CH1.ConfNb=1 +ProjectManager.ComputerToolchain=false +Mcu.Pin17=PB1 +RCC.HSI_VALUE=16000000 +Mcu.Pin18=PB2 +PA5.GPIO_Speed=GPIO_SPEED_FREQ_HIGH +SH.S_TIM3_CH4.ConfNb=1 +ADC1.NbrOfConversionFlag=1 +Mcu.Pin11=PA5 +Mcu.Pin12=PA6 +Mcu.Pin10=PA3 +PA2.Mode=Asynchronous +RCC.PWRFreq_Value=64000000 +PB0.Signal=S_TIM3_CH3 +PF0-OSC_IN\ (PF0).GPIOParameters=GPIO_Label +ProjectManager.DeviceId=STM32G070RBTx +ProjectManager.LibraryCopy=1 +SH.S_TIM3_CH4.0=TIM3_CH4,Output Compare4 CH4 +PA7.Signal=S_TIM3_CH2 diff --git a/bsp/stm32/stm32g070-st-nucleo/board/Kconfig b/bsp/stm32/stm32g070-st-nucleo/board/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..9f1ce517205adb982bf72ece3d6a2917dcea1bb0 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/Kconfig @@ -0,0 +1,198 @@ +menu "Hardware Drivers Config" + +config SOC_STM32G070RB + bool + select SOC_SERIES_STM32G0 + select RT_USING_COMPONENTS_INIT + select RT_USING_USER_MAIN + default y + +menu "Onboard Peripheral Drivers" + + config BSP_USING_USB_TO_UART + bool "Enable USB TO UART (uart2)" + select BSP_USING_UART2 + default y + +endmenu + +menu "On-chip Peripheral Drivers" + + config BSP_USING_GPIO + bool "Enable GPIO" + select RT_USING_PIN + default y + + menuconfig BSP_USING_UART + bool "Enable UART" + default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_USING_UART1 + bool "Enable UART1" + default n + + config BSP_UART1_RX_USING_DMA + bool "Enable UART1 RX DMA" + depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA + default n + + config BSP_USING_UART2 + bool "Enable UART2" + default n + + config BSP_UART2_RX_USING_DMA + bool "Enable UART2 RX DMA" + depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA + default n + + config BSP_USING_UART3 + bool "Enable UART3" + default n + + config BSP_UART3_RX_USING_DMA + bool "Enable UART3 RX DMA" + depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA + default n + endif + + menuconfig BSP_USING_TIM + bool "Enable timer" + default n + select RT_USING_HWTIMER + if BSP_USING_TIM + + config BSP_USING_TIM1 + bool "Enable TIM1" + default n + + config BSP_USING_TIM3 + bool "Enable TIM3" + default n + endif + + menuconfig BSP_USING_PWM + bool "Enable pwm" + default n + select RT_USING_PWM + if BSP_USING_PWM + menuconfig BSP_USING_PWM3 + bool "Enable timer3 output pwm" + default n + if BSP_USING_PWM3 + config BSP_USING_PWM3_CH1 + bool "Enable PWM3 channel1" + default n + + config BSP_USING_PWM3_CH2 + bool "Enable PWM3 channel2" + default n + + config BSP_USING_PWM3_CH3 + bool "Enable PWM3 channel3" + default n + + config BSP_USING_PWM3_CH4 + bool "Enable PWM3 channel4" + default n + endif + endif + + menuconfig BSP_USING_SPI + bool "Enable SPI BUS" + default n + select RT_USING_SPI + if BSP_USING_SPI + config BSP_USING_SPI1 + bool "Enable SPI1 BUS" + default n + + config BSP_SPI1_TX_USING_DMA + bool "Enable SPI1 TX DMA" + depends on BSP_USING_SPI1 + default n + + config BSP_SPI1_RX_USING_DMA + bool "Enable SPI1 RX DMA" + depends on BSP_USING_SPI1 + select BSP_SPI1_TX_USING_DMA + default n + + config BSP_USING_SPI2 + bool "Enable SPI2 BUS" + default n + + config BSP_SPI2_TX_USING_DMA + bool "Enable SPI2 TX DMA" + depends on BSP_USING_SPI2 + default n + + config BSP_SPI2_RX_USING_DMA + bool "Enable SPI2 RX DMA" + depends on BSP_USING_SPI2 + select BSP_SPI2_TX_USING_DMA + default n + endif + + menuconfig BSP_USING_I2C1 + bool "Enable I2C1 BUS (software simulation)" + default n + select RT_USING_I2C + select RT_USING_I2C_BITOPS + select RT_USING_PIN + if BSP_USING_I2C1 + config BSP_I2C1_SCL_PIN + int "i2c1 scl pin number" + range 0 63 + default 22 + config BSP_I2C1_SDA_PIN + int "I2C1 sda pin number" + range 0 63 + default 23 + endif + + menuconfig BSP_USING_ADC + bool "Enable ADC" + default n + select RT_USING_ADC + if BSP_USING_ADC + config BSP_USING_ADC1 + bool "Enable ADC1" + default n + endif + + config BSP_USING_ON_CHIP_FLASH + bool "Enable on-chip FLASH" + default n + + menuconfig BSP_USING_ONCHIP_RTC + bool "Enable RTC" + select RT_USING_RTC + select RT_USING_LIBC + default n + if BSP_USING_ONCHIP_RTC + choice + prompt "Select clock source" + default BSP_RTC_USING_LSE + + config BSP_RTC_USING_LSE + bool "RTC USING LSE" + + config BSP_RTC_USING_LSI + bool "RTC USING LSI" + endchoice + endif + + config BSP_USING_WDT + bool "Enable Watchdog Timer" + select RT_USING_WDT + default n + source "libraries/HAL_Drivers/Kconfig" + +endmenu + +menu "Board extended module Drivers" + +endmenu + +endmenu diff --git a/bsp/stm32/stm32g070-st-nucleo/board/SConscript b/bsp/stm32/stm32g070-st-nucleo/board/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..1ee2dd32b326fea1703b522a5bac4585958230aa --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/SConscript @@ -0,0 +1,30 @@ +import os +import rtconfig +from building import * + +Import('SDK_LIB') + +cwd = GetCurrentDir() + +# add general drivers +src = Split(''' +board.c +CubeMX_Config/Src/stm32g0xx_hal_msp.c +''') + +path = [cwd] +path += [cwd + '/CubeMX_Config/Inc'] +path += [cwd + '/ports'] + +startup_path_prefix = SDK_LIB + +if rtconfig.CROSS_TOOL == 'gcc': + src += [startup_path_prefix + '/STM32G0xx_HAL/CMSIS/Device/ST/STM32G0xx/Source/Templates/gcc/startup_stm32g070xx.s'] +elif rtconfig.CROSS_TOOL == 'keil': + src += [startup_path_prefix + '/STM32G0xx_HAL/CMSIS/Device/ST/STM32G0xx/Source/Templates/arm/startup_stm32g070xx.s'] +elif rtconfig.CROSS_TOOL == 'iar': + src += [startup_path_prefix + '/STM32G0xx_HAL/CMSIS/Device/ST/STM32G0xx/Source/Templates/iar/startup_stm32g070xx.s'] + +CPPDEFINES = ['STM32G070xx'] +group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES) +Return('group') diff --git a/bsp/stm32/stm32g070-st-nucleo/board/board.c b/bsp/stm32/stm32g070-st-nucleo/board/board.c new file mode 100644 index 0000000000000000000000000000000000000000..2076a612f92de7d0825b75461b3c32436b133950 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/board.c @@ -0,0 +1,62 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2020-7-1 NU-LL first version + */ + +#include "board.h" + +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; + + /** Configure the main internal regulator output voltage + */ + HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1); + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI|RCC_OSCILLATORTYPE_LSI; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV1; + RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT; + RCC_OscInitStruct.LSIState = RCC_LSI_ON; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1; + RCC_OscInitStruct.PLL.PLLN = 8; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; + RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /** Initializes the CPU, AHB and APB busses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) + { + Error_Handler(); + } + /** Initializes the peripherals clocks + */ + PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_USART2 + |RCC_PERIPHCLK_ADC; + PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK1; + PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1; + PeriphClkInit.AdcClockSelection = RCC_ADCCLKSOURCE_SYSCLK; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) + { + Error_Handler(); + } +} diff --git a/bsp/stm32/stm32g070-st-nucleo/board/board.h b/bsp/stm32/stm32g070-st-nucleo/board/board.h new file mode 100644 index 0000000000000000000000000000000000000000..f0345a1293365b8d83d9d6e031df046b349ef9a9 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/board.h @@ -0,0 +1,50 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-06 SummerGift first version + */ + +#ifndef __BOARD_H__ +#define __BOARD_H__ + +#include +#include +#include "drv_common.h" +#include "drv_gpio.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define STM32_FLASH_START_ADRESS ((uint32_t)0x08000000) +#define STM32_FLASH_SIZE (128 * 1024) +#define STM32_FLASH_END_ADDRESS ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE)) + +/* Internal SRAM memory size[Kbytes] <8-64>, Default: 36 */ +#define STM32_SRAM_SIZE 36 +#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024) + +#if defined(__CC_ARM) || defined(__CLANG_ARM) +extern int Image$$RW_IRAM1$$ZI$$Limit; +#define HEAP_BEGIN ((void *)&Image$$RW_IRAM1$$ZI$$Limit) +#elif __ICCARM__ +#pragma section="CSTACK" +#define HEAP_BEGIN (__segment_end("CSTACK")) +#else +extern int __bss_end; +#define HEAP_BEGIN ((void *)&__bss_end) +#endif + +#define HEAP_END STM32_SRAM_END + +void SystemClock_Config(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __BOARD_H__ */ diff --git a/bsp/stm32/stm32g070-st-nucleo/board/linker_scripts/link.icf b/bsp/stm32/stm32g070-st-nucleo/board/linker_scripts/link.icf new file mode 100644 index 0000000000000000000000000000000000000000..5a262a4195d1c435848dd588a67971296b6ff819 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/linker_scripts/link.icf @@ -0,0 +1,28 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x08020000; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x20009000; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x0200; +define symbol __ICFEDIT_size_heap__ = 0x0000; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, last block CSTACK}; \ No newline at end of file diff --git a/bsp/stm32/stm32g070-st-nucleo/board/linker_scripts/link.lds b/bsp/stm32/stm32g070-st-nucleo/board/linker_scripts/link.lds new file mode 100644 index 0000000000000000000000000000000000000000..963ce61634c73344c65937f037a1d3d0fb74b57e --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/linker_scripts/link.lds @@ -0,0 +1,156 @@ +/* + * linker script for STM32FG0x with GNU ld + */ + +/* Program Entry, set to mark it as "used" and avoid gc */ +MEMORY +{ + ROM (rx) : ORIGIN = 0x08000000, LENGTH = 128k /* 128KB flash */ + RAM (rw) : ORIGIN = 0x20000000, LENGTH = 36k /* 36K sram */ +} +ENTRY(Reset_Handler) +_system_stack_size = 0x200; + +SECTIONS +{ + .text : + { + . = ALIGN(4); + _stext = .; + KEEP(*(.isr_vector)) /* Startup code */ + + . = ALIGN(4); + *(.text) /* remaining code */ + *(.text.*) /* remaining code */ + *(.rodata) /* read-only data (constants) */ + *(.rodata*) + *(.glue_7) + *(.glue_7t) + *(.gnu.linkonce.t*) + + /* section information for finsh shell */ + . = ALIGN(4); + __fsymtab_start = .; + KEEP(*(FSymTab)) + __fsymtab_end = .; + + . = ALIGN(4); + __vsymtab_start = .; + KEEP(*(VSymTab)) + __vsymtab_end = .; + + /* section information for initial. */ + . = ALIGN(4); + __rt_init_start = .; + KEEP(*(SORT(.rti_fn*))) + __rt_init_end = .; + + . = ALIGN(4); + + PROVIDE(__ctors_start__ = .); + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + PROVIDE(__ctors_end__ = .); + + . = ALIGN(4); + + _etext = .; + } > ROM = 0 + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + + /* This is used by the startup in order to initialize the .data secion */ + _sidata = .; + } > ROM + __exidx_end = .; + + /* .data section which is used for initialized data */ + + .data : AT (_sidata) + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _sdata = . ; + + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + + PROVIDE(__dtors_start__ = .); + KEEP(*(SORT(.dtors.*))) + KEEP(*(.dtors)) + PROVIDE(__dtors_end__ = .); + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _edata = . ; + } >RAM + + .stack : + { + . = ALIGN(4); + _sstack = .; + . = . + _system_stack_size; + . = ALIGN(4); + _estack = .; + } >RAM + + __bss_start = .; + .bss : + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; + + *(.bss) + *(.bss.*) + *(COMMON) + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _ebss = . ; + + *(.bss.init) + } > RAM + __bss_end = .; + + _end = .; + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + * Symbols in the DWARF debugging sections are relative to the beginning + * of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +} diff --git a/bsp/stm32/stm32g070-st-nucleo/board/linker_scripts/link.sct b/bsp/stm32/stm32g070-st-nucleo/board/linker_scripts/link.sct new file mode 100644 index 0000000000000000000000000000000000000000..01a848e615b9c0231a57072d0577c92ccb1fe48f --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/linker_scripts/link.sct @@ -0,0 +1,16 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x08000000 0x00020000 { ; load region size_region + ER_IROM1 0x08000000 0x00020000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + .ANY (+XO) + } + RW_IRAM1 0x20000000 0x00009000 { ; RW data + .ANY (+RW +ZI) + } +} + diff --git a/bsp/stm32/stm32g070-st-nucleo/board/ports/fal_cfg.h b/bsp/stm32/stm32g070-st-nucleo/board/ports/fal_cfg.h new file mode 100644 index 0000000000000000000000000000000000000000..ee65e188d922a60e36d346e246c975319f6059a8 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/board/ports/fal_cfg.h @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-12-8 zylx first version + */ + +#ifndef _FAL_CFG_H_ +#define _FAL_CFG_H_ + +#include +#include + +extern const struct fal_flash_dev stm32_onchip_flash; + +/* flash device table */ +#define FAL_FLASH_DEV_TABLE \ +{ \ + &stm32_onchip_flash, \ +} +/* ====================== Partition Configuration ========================== */ +#ifdef FAL_PART_HAS_TABLE_CFG + +/* partition table */ +#define FAL_PART_TABLE \ +{ \ + {FAL_PART_MAGIC_WROD, "app", "onchip_flash", 0, 112 * 1024, 0}, \ + {FAL_PART_MAGIC_WROD, "param", "onchip_flash", 112 * 1024 , 16 * 1024, 0}, \ +} +#endif /* FAL_PART_HAS_TABLE_CFG */ +#endif /* _FAL_CFG_H_ */ diff --git a/bsp/stm32/stm32g070-st-nucleo/figures/board.jpg b/bsp/stm32/stm32g070-st-nucleo/figures/board.jpg new file mode 100644 index 0000000000000000000000000000000000000000..13471220ca3b8417e45f6b6890434f5591da38c1 Binary files /dev/null and b/bsp/stm32/stm32g070-st-nucleo/figures/board.jpg differ diff --git a/bsp/stm32/stm32g070-st-nucleo/project.ewp b/bsp/stm32/stm32g070-st-nucleo/project.ewp new file mode 100644 index 0000000000000000000000000000000000000000..7ff56f91342fc1377c44a7ec73352d22ed16b2a0 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/project.ewp @@ -0,0 +1,2326 @@ + + 3 + + rt-thread + + ARM + + 1 + + General + 3 + + 31 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 35 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 22 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Release + + ARM + + 0 + + General + 3 + + 31 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 35 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 0 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 22 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 0 + + + + + + + BILINK + 0 + + + + + Kernel + + $PROJ_DIR$\..\..\..\src\clock.c + + + $PROJ_DIR$\..\..\..\src\components.c + + + $PROJ_DIR$\..\..\..\src\device.c + + + $PROJ_DIR$\..\..\..\src\idle.c + + + $PROJ_DIR$\..\..\..\src\ipc.c + + + $PROJ_DIR$\..\..\..\src\irq.c + + + $PROJ_DIR$\..\..\..\src\kservice.c + + + $PROJ_DIR$\..\..\..\src\mem.c + + + $PROJ_DIR$\..\..\..\src\mempool.c + + + $PROJ_DIR$\..\..\..\src\object.c + + + $PROJ_DIR$\..\..\..\src\scheduler.c + + + $PROJ_DIR$\..\..\..\src\signal.c + + + $PROJ_DIR$\..\..\..\src\thread.c + + + $PROJ_DIR$\..\..\..\src\timer.c + + + + Applications + + $PROJ_DIR$\applications\main.c + + + + Drivers + + $PROJ_DIR$\board\board.c + + + $PROJ_DIR$\board\CubeMX_Config\Src\stm32g0xx_hal_msp.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\CMSIS\Device\ST\STM32G0xx\Source\Templates\iar\startup_stm32g071xx.s + + + $PROJ_DIR$\..\libraries\HAL_Drivers\drv_gpio.c + + + $PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c + + + $PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c + + + + cpu + + $PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\cortex-m0\cpuport.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\cortex-m0\context_iar.S + + + + DeviceDrivers + + $PROJ_DIR$\..\..\..\components\drivers\misc\pin.c + + + $PROJ_DIR$\..\..\..\components\drivers\serial\serial.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\completion.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\pipe.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c + + + + finsh + + $PROJ_DIR$\..\..\..\components\finsh\shell.c + + + $PROJ_DIR$\..\..\..\components\finsh\cmd.c + + + $PROJ_DIR$\..\..\..\components\finsh\msh.c + + + $PROJ_DIR$\..\..\..\components\finsh\finsh_compiler.c + + + $PROJ_DIR$\..\..\..\components\finsh\finsh_error.c + + + $PROJ_DIR$\..\..\..\components\finsh\finsh_heap.c + + + $PROJ_DIR$\..\..\..\components\finsh\finsh_init.c + + + $PROJ_DIR$\..\..\..\components\finsh\finsh_node.c + + + $PROJ_DIR$\..\..\..\components\finsh\finsh_ops.c + + + $PROJ_DIR$\..\..\..\components\finsh\finsh_parser.c + + + $PROJ_DIR$\..\..\..\components\finsh\finsh_var.c + + + $PROJ_DIR$\..\..\..\components\finsh\finsh_vm.c + + + $PROJ_DIR$\..\..\..\components\finsh\finsh_token.c + + + + libc + + + STM32_HAL + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\CMSIS\Device\ST\STM32G0xx\Source\Templates\system_stm32g0xx.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_cec.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc_ex.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash_ex.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma_ex.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr_ex.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_cortex.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_gpio.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart_ex.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_usart_ex.c + + + $PROJ_DIR$\..\libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_usart.c + + + diff --git a/bsp/stm32/stm32g070-st-nucleo/project.eww b/bsp/stm32/stm32g070-st-nucleo/project.eww new file mode 100644 index 0000000000000000000000000000000000000000..c2cb02eb1e89d73e24183274c1c886ddf74f9537 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/project.eww @@ -0,0 +1,10 @@ + + + + + $WS_DIR$\project.ewp + + + + + diff --git a/bsp/stm32/stm32g070-st-nucleo/project.uvprojx b/bsp/stm32/stm32g070-st-nucleo/project.uvprojx new file mode 100644 index 0000000000000000000000000000000000000000..309fc164a9f88fb2496e8754b550cd5f9b0f0cc1 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/project.uvprojx @@ -0,0 +1,762 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + STM32G070RBTx + STMicroelectronics + Keil.STM32G0xx_DFP.1.2.0 + https://www.keil.com/pack/ + IRAM(0x20000000,0x00009000) IROM(0x08000000,0x00020000) CPUTYPE("Cortex-M0+") CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32G0xx_128 -FS08000000 -FL020000 -FP0($$Device:STM32G070RBTx$CMSIS\Flash\STM32G0xx_128.FLM)) + 0 + $$Device:STM32G070RBTx$Drivers\CMSIS\Device\ST\STM32G0xx\Include\stm32g0xx.h + + + + + + + + + + $$Device:STM32G070RBTx$CMSIS\SVD\STM32G070.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\ + template + 1 + 0 + 0 + 1 + 0 + .\build\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP-MPU + DARMCM1.DLL + -pCM0+ + SARMCM3.DLL + -MPU + TARMCM1.DLL + -pCM0+ + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + "" () + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M0+" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x9000 + + + 1 + 0x8000000 + 0x20000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x20000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x9000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 4 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + USE_HAL_DRIVER, STM32G070xx + + applications;.;rt-thread\libcpu\arm\common;rt-thread\libcpu\arm\cortex-m0;rt-thread\components\drivers\include;rt-thread\components\drivers\include;rt-thread\components\drivers\include;board;board\CubeMX_Config\Inc;board\ports;libraries\HAL_Drivers;libraries\HAL_Drivers\config;rt-thread\components\finsh;.;rt-thread\include;rt-thread\components\libc\compilers\common;libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Inc;libraries\STM32G0xx_HAL\CMSIS\Device\ST\STM32G0xx\Include;libraries\STM32G0xx_HAL\CMSIS\Include + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + Applications + + + main.c + 1 + applications\main.c + + + + + cpu + + + backtrace.c + 1 + rt-thread\libcpu\arm\common\backtrace.c + + + div0.c + 1 + rt-thread\libcpu\arm\common\div0.c + + + showmem.c + 1 + rt-thread\libcpu\arm\common\showmem.c + + + cpuport.c + 1 + rt-thread\libcpu\arm\cortex-m0\cpuport.c + + + context_rvds.S + 2 + rt-thread\libcpu\arm\cortex-m0\context_rvds.S + + + + + DeviceDrivers + + + pin.c + 1 + rt-thread\components\drivers\misc\pin.c + + + serial.c + 1 + rt-thread\components\drivers\serial\serial.c + + + completion.c + 1 + rt-thread\components\drivers\src\completion.c + + + dataqueue.c + 1 + rt-thread\components\drivers\src\dataqueue.c + + + pipe.c + 1 + rt-thread\components\drivers\src\pipe.c + + + ringblk_buf.c + 1 + rt-thread\components\drivers\src\ringblk_buf.c + + + ringbuffer.c + 1 + rt-thread\components\drivers\src\ringbuffer.c + + + waitqueue.c + 1 + rt-thread\components\drivers\src\waitqueue.c + + + workqueue.c + 1 + rt-thread\components\drivers\src\workqueue.c + + + + + Drivers + + + board.c + 1 + board\board.c + + + stm32g0xx_hal_msp.c + 1 + board\CubeMX_Config\Src\stm32g0xx_hal_msp.c + + + startup_stm32g070xx.s + 2 + libraries\STM32G0xx_HAL\CMSIS\Device\ST\STM32G0xx\Source\Templates\arm\startup_stm32g070xx.s + + + drv_gpio.c + 1 + libraries\HAL_Drivers\drv_gpio.c + + + drv_usart.c + 1 + libraries\HAL_Drivers\drv_usart.c + + + drv_common.c + 1 + libraries\HAL_Drivers\drv_common.c + + + + + finsh + + + shell.c + 1 + rt-thread\components\finsh\shell.c + + + cmd.c + 1 + rt-thread\components\finsh\cmd.c + + + msh.c + 1 + rt-thread\components\finsh\msh.c + + + finsh_compiler.c + 1 + rt-thread\components\finsh\finsh_compiler.c + + + finsh_error.c + 1 + rt-thread\components\finsh\finsh_error.c + + + finsh_heap.c + 1 + rt-thread\components\finsh\finsh_heap.c + + + finsh_init.c + 1 + rt-thread\components\finsh\finsh_init.c + + + finsh_node.c + 1 + rt-thread\components\finsh\finsh_node.c + + + finsh_ops.c + 1 + rt-thread\components\finsh\finsh_ops.c + + + finsh_parser.c + 1 + rt-thread\components\finsh\finsh_parser.c + + + finsh_var.c + 1 + rt-thread\components\finsh\finsh_var.c + + + finsh_vm.c + 1 + rt-thread\components\finsh\finsh_vm.c + + + finsh_token.c + 1 + rt-thread\components\finsh\finsh_token.c + + + + + Kernel + + + clock.c + 1 + rt-thread\src\clock.c + + + components.c + 1 + rt-thread\src\components.c + + + device.c + 1 + rt-thread\src\device.c + + + idle.c + 1 + rt-thread\src\idle.c + + + ipc.c + 1 + rt-thread\src\ipc.c + + + irq.c + 1 + rt-thread\src\irq.c + + + kservice.c + 1 + rt-thread\src\kservice.c + + + mem.c + 1 + rt-thread\src\mem.c + + + mempool.c + 1 + rt-thread\src\mempool.c + + + object.c + 1 + rt-thread\src\object.c + + + scheduler.c + 1 + rt-thread\src\scheduler.c + + + signal.c + 1 + rt-thread\src\signal.c + + + thread.c + 1 + rt-thread\src\thread.c + + + timer.c + 1 + rt-thread\src\timer.c + + + + + libc + + + time.c + 1 + rt-thread\components\libc\compilers\common\time.c + + + + + STM32_HAL + + + system_stm32g0xx.c + 1 + libraries\STM32G0xx_HAL\CMSIS\Device\ST\STM32G0xx\Source\Templates\system_stm32g0xx.c + + + stm32g0xx_hal_cec.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_cec.c + + + stm32g0xx_hal_rcc.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc.c + + + stm32g0xx_hal_rcc_ex.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_rcc_ex.c + + + stm32g0xx_hal_flash.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash.c + + + stm32g0xx_hal_flash_ex.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_flash_ex.c + + + stm32g0xx_hal_dma.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma.c + + + stm32g0xx_hal_dma_ex.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_dma_ex.c + + + stm32g0xx_hal_pwr.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr.c + + + stm32g0xx_hal_pwr_ex.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_pwr_ex.c + + + stm32g0xx_hal_cortex.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_cortex.c + + + stm32g0xx_hal.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal.c + + + stm32g0xx_hal_gpio.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_gpio.c + + + stm32g0xx_hal_uart.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart.c + + + stm32g0xx_hal_uart_ex.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_uart_ex.c + + + stm32g0xx_hal_usart_ex.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_hal_usart_ex.c + + + stm32g0xx_ll_usart.c + 1 + libraries\STM32G0xx_HAL\STM32G0xx_HAL_Driver\Src\stm32g0xx_ll_usart.c + + + + + + + + + + + + + + diff --git a/bsp/stm32/stm32g070-st-nucleo/rtconfig.h b/bsp/stm32/stm32g070-st-nucleo/rtconfig.h new file mode 100644 index 0000000000000000000000000000000000000000..6abecff5f80def00a7419c24e695929fd6896f49 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/rtconfig.h @@ -0,0 +1,169 @@ +#ifndef RT_CONFIG_H__ +#define RT_CONFIG_H__ + +/* Automatically generated file; DO NOT EDIT. */ +/* RT-Thread Configuration */ + +/* RT-Thread Kernel */ + +#define RT_NAME_MAX 8 +#define RT_ALIGN_SIZE 4 +#define RT_THREAD_PRIORITY_32 +#define RT_THREAD_PRIORITY_MAX 32 +#define RT_TICK_PER_SECOND 100 +#define RT_USING_OVERFLOW_CHECK +#define RT_USING_HOOK +#define RT_USING_IDLE_HOOK +#define RT_IDLE_HOOK_LIST_SIZE 4 +#define IDLE_THREAD_STACK_SIZE 256 +#define RT_DEBUG +#define RT_DEBUG_COLOR + +/* Inter-Thread communication */ + +#define RT_USING_SEMAPHORE +#define RT_USING_MUTEX +#define RT_USING_EVENT +#define RT_USING_MAILBOX +#define RT_USING_MESSAGEQUEUE + +/* Memory Management */ + +#define RT_USING_MEMPOOL +#define RT_USING_SMALL_MEM +#define RT_USING_HEAP + +/* Kernel Device Object */ + +#define RT_USING_DEVICE +#define RT_USING_CONSOLE +#define RT_CONSOLEBUF_SIZE 128 +#define RT_CONSOLE_DEVICE_NAME "uart2" +#define RT_VER_NUM 0x40003 +#define ARCH_ARM +#define ARCH_ARM_CORTEX_M +#define ARCH_ARM_CORTEX_M0 + +/* RT-Thread Components */ + +#define RT_USING_COMPONENTS_INIT +#define RT_USING_USER_MAIN +#define RT_MAIN_THREAD_STACK_SIZE 2048 +#define RT_MAIN_THREAD_PRIORITY 10 + +/* C++ features */ + + +/* Command shell */ + +#define RT_USING_FINSH +#define FINSH_THREAD_NAME "tshell" +#define FINSH_USING_HISTORY +#define FINSH_HISTORY_LINES 5 +#define FINSH_USING_SYMTAB +#define FINSH_USING_DESCRIPTION +#define FINSH_THREAD_PRIORITY 20 +#define FINSH_THREAD_STACK_SIZE 4096 +#define FINSH_CMD_SIZE 80 +#define FINSH_USING_MSH +#define FINSH_USING_MSH_DEFAULT +#define FINSH_ARG_MAX 10 + +/* Device virtual file system */ + + +/* Device Drivers */ + +#define RT_USING_DEVICE_IPC +#define RT_PIPE_BUFSZ 512 +#define RT_USING_SERIAL +#define RT_SERIAL_RB_BUFSZ 64 +#define RT_USING_PIN + +/* Using USB */ + + +/* POSIX layer and C standard library */ + +#define RT_LIBC_USING_TIME + +/* Network */ + +/* Socket abstraction layer */ + + +/* Network interface device */ + + +/* light weight TCP/IP stack */ + + +/* AT commands */ + + +/* VBUS(Virtual Software BUS) */ + + +/* Utilities */ + + +/* RT-Thread online packages */ + +/* IoT - internet of things */ + + +/* Wi-Fi */ + +/* Marvell WiFi */ + + +/* Wiced WiFi */ + + +/* IoT Cloud */ + + +/* security packages */ + + +/* language packages */ + + +/* multimedia packages */ + + +/* tools packages */ + + +/* system packages */ + + +/* peripheral libraries and drivers */ + + +/* miscellaneous packages */ + + +/* samples: kernel and components samples */ + +#define SOC_FAMILY_STM32 +#define SOC_SERIES_STM32G0 + +/* Hardware Drivers Config */ + +#define SOC_STM32G070RB + +/* Onboard Peripheral Drivers */ + +#define BSP_USING_USB_TO_UART + +/* On-chip Peripheral Drivers */ + +#define BSP_USING_GPIO +#define BSP_USING_UART +#define BSP_USING_UART2 + +/* Board extended module Drivers */ + + +#endif diff --git a/bsp/stm32/stm32g070-st-nucleo/rtconfig.py b/bsp/stm32/stm32g070-st-nucleo/rtconfig.py new file mode 100644 index 0000000000000000000000000000000000000000..d279b236588a5005a420053041dfdc88023b00ac --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/rtconfig.py @@ -0,0 +1,150 @@ +import os + +# toolchains options +ARCH='arm' +CPU='cortex-m0' +CROSS_TOOL='gcc' + +# bsp lib config +BSP_LIBRARY_TYPE = None + +if os.getenv('RTT_CC'): + CROSS_TOOL = os.getenv('RTT_CC') +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') + +# cross_tool provides the cross compiler +# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR +if CROSS_TOOL == 'gcc': + PLATFORM = 'gcc' + EXEC_PATH = r'C:\Users\XXYYZZ' +elif CROSS_TOOL == 'keil': + PLATFORM = 'armcc' + EXEC_PATH = r'C:/Keil_v5' +elif CROSS_TOOL == 'iar': + PLATFORM = 'iar' + EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.0' + +if os.getenv('RTT_EXEC_PATH'): + EXEC_PATH = os.getenv('RTT_EXEC_PATH') + +BUILD = 'debug' + +if PLATFORM == 'gcc': + # toolchains + PREFIX = 'arm-none-eabi-' + CC = PREFIX + 'gcc' + AS = PREFIX + 'gcc' + AR = PREFIX + 'ar' + CXX = PREFIX + 'g++' + LINK = PREFIX + 'gcc' + TARGET_EXT = 'elf' + SIZE = PREFIX + 'size' + OBJDUMP = PREFIX + 'objdump' + OBJCPY = PREFIX + 'objcopy' + + DEVICE = ' -mcpu=cortex-m0plus -mthumb -ffunction-sections -fdata-sections' + CFLAGS = DEVICE + ' -Dgcc' + AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb ' + LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds' + + CPATH = '' + LPATH = '' + + if BUILD == 'debug': + CFLAGS += ' -O0 -gdwarf-2 -g' + AFLAGS += ' -gdwarf-2' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + + POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n' + +elif PLATFORM == 'armcc': + # toolchains + CC = 'armcc' + CXX = 'armcc' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu Cortex-M0 ' + CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99' + AFLAGS = DEVICE + ' --apcs=interwork ' + LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict' + CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include' + LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib' + + CFLAGS += ' -D__MICROLIB ' + AFLAGS += ' --pd "__MICROLIB SETA 1" ' + LFLAGS += ' --library_type=microlib ' + EXEC_PATH += '/ARM/ARMCC/bin/' + + if BUILD == 'debug': + CFLAGS += ' -g -O0' + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + CFLAGS += ' -std=c99' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' + +elif PLATFORM == 'iar': + # toolchains + CC = 'iccarm' + CXX = 'iccarm' + AS = 'iasmarm' + AR = 'iarchive' + LINK = 'ilinkarm' + TARGET_EXT = 'out' + + DEVICE = '-Dewarm' + + CFLAGS = DEVICE + CFLAGS += ' --diag_suppress Pa050' + CFLAGS += ' --no_cse' + CFLAGS += ' --no_unroll' + CFLAGS += ' --no_inline' + CFLAGS += ' --no_code_motion' + CFLAGS += ' --no_tbaa' + CFLAGS += ' --no_clustering' + CFLAGS += ' --no_scheduling' + CFLAGS += ' --endian=little' + CFLAGS += ' --cpu=Cortex-M0' + CFLAGS += ' -e' + CFLAGS += ' --fpu=None' + CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"' + CFLAGS += ' --silent' + + AFLAGS = DEVICE + AFLAGS += ' -s+' + AFLAGS += ' -w+' + AFLAGS += ' -r' + AFLAGS += ' --cpu Cortex-M0' + AFLAGS += ' --fpu None' + AFLAGS += ' -S' + + if BUILD == 'debug': + CFLAGS += ' --debug' + CFLAGS += ' -On' + else: + CFLAGS += ' -Oh' + + LFLAGS = ' --config "board/linker_scripts/link.icf"' + LFLAGS += ' --entry __iar_program_start' + + CXXFLAGS = CFLAGS + + EXEC_PATH = EXEC_PATH + '/arm/bin/' + POST_ACTION = 'ielftool --bin $TARGET rtthread.bin' + +def dist_handle(BSP_ROOT, dist_dir): + import sys + cwd_path = os.getcwd() + sys.path.append(os.path.join(os.path.dirname(BSP_ROOT), 'tools')) + from sdk_dist import dist_do_building + dist_do_building(BSP_ROOT, dist_dir) diff --git a/bsp/stm32/stm32g070-st-nucleo/template.ewp b/bsp/stm32/stm32g070-st-nucleo/template.ewp new file mode 100644 index 0000000000000000000000000000000000000000..9c6d9a994e6caed574a1e073e6a62e4492b344ac --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/template.ewp @@ -0,0 +1,2074 @@ + + + 3 + + rt-thread + + ARM + + 1 + + General + 3 + + 31 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 35 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 22 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Release + + ARM + + 0 + + General + 3 + + 31 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 35 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 0 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 22 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 0 + + + + + + + BILINK + 0 + + + + diff --git a/bsp/stm32/stm32g070-st-nucleo/template.eww b/bsp/stm32/stm32g070-st-nucleo/template.eww new file mode 100644 index 0000000000000000000000000000000000000000..bd036bb4c98c1598f04b85f64b0dff37f6ec6028 --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/template.eww @@ -0,0 +1,10 @@ + + + + + $WS_DIR$\template.ewp + + + + + diff --git a/bsp/stm32/stm32g070-st-nucleo/template.uvprojx b/bsp/stm32/stm32g070-st-nucleo/template.uvprojx new file mode 100644 index 0000000000000000000000000000000000000000..585b403d784794fd13867b4fd0ed303aa558814b --- /dev/null +++ b/bsp/stm32/stm32g070-st-nucleo/template.uvprojx @@ -0,0 +1,390 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rt-thread + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + STM32G070RBTx + STMicroelectronics + Keil.STM32G0xx_DFP.1.2.0 + https://www.keil.com/pack/ + IRAM(0x20000000,0x00009000) IROM(0x08000000,0x00020000) CPUTYPE("Cortex-M0+") CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32G0xx_128 -FS08000000 -FL020000 -FP0($$Device:STM32G070RBTx$CMSIS\Flash\STM32G0xx_128.FLM)) + 0 + $$Device:STM32G070RBTx$Drivers\CMSIS\Device\ST\STM32G0xx\Include\stm32g0xx.h + + + + + + + + + + $$Device:STM32G070RBTx$CMSIS\SVD\STM32G070.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\ + template + 1 + 0 + 0 + 1 + 0 + .\build\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP-MPU + DARMCM1.DLL + -pCM0+ + SARMCM3.DLL + -MPU + TARMCM1.DLL + -pCM0+ + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4104 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M0+" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x9000 + + + 1 + 0x8000000 + 0x20000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x20000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x9000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 4 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + + + + + + + +