diff --git a/bsp/stm32/README.md b/bsp/stm32/README.md index 68920bbb93102f0ee0c2c68d4ec302e8f1408bd3..ffdf1668f2d28c545ff63398b06a221e29fb442d 100644 --- a/bsp/stm32/README.md +++ b/bsp/stm32/README.md @@ -17,7 +17,6 @@ STM32 系列 BSP 目前支持情况如下表所示： | [stm32f103-fire-arbitrary](stm32f103-fire-arbitrary/) | 野火 F103 霸道开发板 | | [stm32f103-gizwits-gokitv21](stm32f103-gizwits-gokitv21) | GoKit V2.1开发板 | | [stm32f103-hw100k-ibox](stm32f103-hw100k-ibox) | 硬件十万个为什么 STM32F103 iBox 开发板 | -| [stm32f103-mini-system](stm32f103-mini-system) | STM32F103C8T6最小系统板 | | [stm32f103-onenet-nbiot](stm32f103-onenet-nbiot) | STM32F103 OneNET NB-IoT 开发板 | | [stm32f103-yf-ufun](stm32f103-yf-ufun) | STM32F103 yf-ufun 开发板 | | [stm32f107-uc-eval](stm32f107-uc-eval) | uC/Eval STM32F107 评估板（中国版） | diff --git a/bsp/stm32/stm32f103-mini-system/.config b/bsp/stm32/stm32f103-mini-system/.config deleted file mode 100644 index 7f2ef00287de2ab3b6be032fd989c1ea9ed1ca3b..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/.config +++ /dev/null @@ -1,341 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# RT-Thread Configuration -# - -# -# RT-Thread Kernel -# -CONFIG_RT_NAME_MAX=8 -# CONFIG_RT_USING_ARCH_DATA_TYPE is not set -# CONFIG_RT_USING_SMP is not set -CONFIG_RT_ALIGN_SIZE=4 -# CONFIG_RT_THREAD_PRIORITY_8 is not set -CONFIG_RT_THREAD_PRIORITY_32=y -# CONFIG_RT_THREAD_PRIORITY_256 is not set -CONFIG_RT_THREAD_PRIORITY_MAX=32 -CONFIG_RT_TICK_PER_SECOND=1000 -CONFIG_RT_USING_OVERFLOW_CHECK=y -CONFIG_RT_USING_HOOK=y -CONFIG_RT_USING_IDLE_HOOK=y -CONFIG_RT_IDLE_HOOK_LIST_SIZE=4 -CONFIG_IDLE_THREAD_STACK_SIZE=256 -# CONFIG_RT_USING_TIMER_SOFT is not set -CONFIG_RT_DEBUG=y -# CONFIG_RT_DEBUG_COLOR is not set -# CONFIG_RT_DEBUG_INIT_CONFIG is not set -# CONFIG_RT_DEBUG_THREAD_CONFIG is not set -# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set -# CONFIG_RT_DEBUG_IPC_CONFIG is not set -# CONFIG_RT_DEBUG_TIMER_CONFIG is not set -# CONFIG_RT_DEBUG_IRQ_CONFIG is not set -# CONFIG_RT_DEBUG_MEM_CONFIG is not set -# CONFIG_RT_DEBUG_SLAB_CONFIG is not set -# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set -# CONFIG_RT_DEBUG_MODULE_CONFIG is not set - -# -# Inter-Thread communication -# -CONFIG_RT_USING_SEMAPHORE=y -CONFIG_RT_USING_MUTEX=y -CONFIG_RT_USING_EVENT=y -CONFIG_RT_USING_MAILBOX=y -CONFIG_RT_USING_MESSAGEQUEUE=y -# CONFIG_RT_USING_SIGNALS is not set - -# -# Memory Management -# -CONFIG_RT_USING_MEMPOOL=y -# CONFIG_RT_USING_MEMHEAP is not set -# CONFIG_RT_USING_NOHEAP is not set -CONFIG_RT_USING_SMALL_MEM=y -# CONFIG_RT_USING_SLAB is not set -# CONFIG_RT_USING_MEMTRACE is not set -CONFIG_RT_USING_HEAP=y - -# -# Kernel Device Object -# -CONFIG_RT_USING_DEVICE=y -# CONFIG_RT_USING_DEVICE_OPS is not set -# CONFIG_RT_USING_INTERRUPT_INFO is not set -CONFIG_RT_USING_CONSOLE=y -CONFIG_RT_CONSOLEBUF_SIZE=128 -CONFIG_RT_CONSOLE_DEVICE_NAME="uart1" -CONFIG_RT_VER_NUM=0x40001 -CONFIG_ARCH_ARM=y -CONFIG_ARCH_ARM_CORTEX_M=y -CONFIG_ARCH_ARM_CORTEX_M3=y -# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set - -# -# RT-Thread Components -# -CONFIG_RT_USING_COMPONENTS_INIT=y -CONFIG_RT_USING_USER_MAIN=y -CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048 -CONFIG_RT_MAIN_THREAD_PRIORITY=10 - -# -# C++ features -# -# CONFIG_RT_USING_CPLUSPLUS is not set - -# -# Command shell -# -CONFIG_RT_USING_FINSH=y -CONFIG_FINSH_THREAD_NAME="tshell" -CONFIG_FINSH_USING_HISTORY=y -CONFIG_FINSH_HISTORY_LINES=5 -CONFIG_FINSH_USING_SYMTAB=y -CONFIG_FINSH_USING_DESCRIPTION=y -# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set -CONFIG_FINSH_THREAD_PRIORITY=20 -CONFIG_FINSH_THREAD_STACK_SIZE=4096 -CONFIG_FINSH_CMD_SIZE=80 -# CONFIG_FINSH_USING_AUTH is not set -CONFIG_FINSH_USING_MSH=y -CONFIG_FINSH_USING_MSH_DEFAULT=y -CONFIG_FINSH_USING_MSH_ONLY=y -CONFIG_FINSH_ARG_MAX=10 - -# -# Device virtual file system -# -# CONFIG_RT_USING_DFS is not set - -# -# Device Drivers -# -CONFIG_RT_USING_DEVICE_IPC=y -CONFIG_RT_PIPE_BUFSZ=512 -# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set -CONFIG_RT_USING_SERIAL=y -CONFIG_RT_SERIAL_USING_DMA=y -CONFIG_RT_SERIAL_RB_BUFSZ=64 -# CONFIG_RT_USING_CAN is not set -# CONFIG_RT_USING_HWTIMER is not set -# CONFIG_RT_USING_CPUTIME is not set -# CONFIG_RT_USING_I2C is not set -CONFIG_RT_USING_PIN=y -# CONFIG_RT_USING_ADC is not set -# CONFIG_RT_USING_PWM is not set -# CONFIG_RT_USING_MTD_NOR is not set -# CONFIG_RT_USING_MTD_NAND is not set -# CONFIG_RT_USING_MTD is not set -# CONFIG_RT_USING_PM is not set -# CONFIG_RT_USING_RTC is not set -# CONFIG_RT_USING_SDIO is not set -# CONFIG_RT_USING_SPI is not set -# CONFIG_RT_USING_WDT is not set -# CONFIG_RT_USING_AUDIO is not set -# CONFIG_RT_USING_SENSOR is not set - -# -# Using WiFi -# -# CONFIG_RT_USING_WIFI is not set - -# -# Using USB -# -# CONFIG_RT_USING_USB_HOST is not set -# CONFIG_RT_USING_USB_DEVICE is not set - -# -# POSIX layer and C standard library -# -# CONFIG_RT_USING_LIBC is not set -# CONFIG_RT_USING_PTHREADS is not set - -# -# Network -# - -# -# Socket abstraction layer -# -# CONFIG_RT_USING_SAL is not set - -# -# light weight TCP/IP stack -# -# CONFIG_RT_USING_LWIP is not set - -# -# Modbus master and slave stack -# -# CONFIG_RT_USING_MODBUS is not set - -# -# AT commands -# -# CONFIG_RT_USING_AT is not set - -# -# VBUS(Virtual Software BUS) -# -# CONFIG_RT_USING_VBUS is not set - -# -# Utilities -# -# CONFIG_RT_USING_LOGTRACE is not set -# CONFIG_RT_USING_RYM is not set -# CONFIG_RT_USING_ULOG is not set -# CONFIG_RT_USING_UTEST is not set -# CONFIG_RT_USING_LWP is not set - -# -# RT-Thread online packages -# - -# -# IoT - internet of things -# -# CONFIG_PKG_USING_PAHOMQTT is not set -# CONFIG_PKG_USING_WEBCLIENT is not set -# CONFIG_PKG_USING_MONGOOSE is not set -# CONFIG_PKG_USING_WEBTERMINAL is not set -# CONFIG_PKG_USING_CJSON is not set -# CONFIG_PKG_USING_JSMN is not set -# CONFIG_PKG_USING_LJSON is not set -# CONFIG_PKG_USING_EZXML is not set -# CONFIG_PKG_USING_NANOPB is not set - -# -# Wi-Fi -# - -# -# Marvell WiFi -# -# CONFIG_PKG_USING_WLANMARVELL is not set - -# -# Wiced WiFi -# -# CONFIG_PKG_USING_WLAN_WICED is not set -# CONFIG_PKG_USING_COAP is not set -# CONFIG_PKG_USING_NOPOLL is not set -# CONFIG_PKG_USING_NETUTILS is not set -# CONFIG_PKG_USING_AT_DEVICE is not set - -# -# IoT Cloud -# -# CONFIG_PKG_USING_ONENET is not set -# CONFIG_PKG_USING_GAGENT_CLOUD is not set -# CONFIG_PKG_USING_ALI_IOTKIT is not set -# CONFIG_PKG_USING_AZURE is not set - -# -# security packages -# -# CONFIG_PKG_USING_MBEDTLS is not set -# CONFIG_PKG_USING_libsodium is not set -# CONFIG_PKG_USING_TINYCRYPT is not set - -# -# language packages -# -# CONFIG_PKG_USING_LUA is not set -# CONFIG_PKG_USING_JERRYSCRIPT is not set -# CONFIG_PKG_USING_MICROPYTHON is not set - -# -# multimedia packages -# -# CONFIG_PKG_USING_OPENMV is not set -# CONFIG_PKG_USING_MUPDF is not set - -# -# tools packages -# -# CONFIG_PKG_USING_CMBACKTRACE is not set -# CONFIG_PKG_USING_EASYFLASH is not set -# CONFIG_PKG_USING_EASYLOGGER is not set -# CONFIG_PKG_USING_SYSTEMVIEW is not set - -# -# system packages -# -# CONFIG_PKG_USING_GUIENGINE is not set -# CONFIG_PKG_USING_CAIRO is not set -# CONFIG_PKG_USING_PIXMAN is not set -# CONFIG_PKG_USING_LWEXT4 is not set -# CONFIG_PKG_USING_PARTITION is not set -# CONFIG_PKG_USING_FAL is not set -# CONFIG_PKG_USING_SQLITE is not set -# CONFIG_PKG_USING_RTI is not set -# CONFIG_PKG_USING_LITTLEVGL2RTT is not set - -# -# peripheral libraries and drivers -# -# CONFIG_PKG_USING_STM32F4_HAL is not set -# CONFIG_PKG_USING_STM32F4_DRIVERS is not set -# CONFIG_PKG_USING_REALTEK_AMEBA is not set -# CONFIG_PKG_USING_SHT2X is not set -# CONFIG_PKG_USING_AHT10 is not set -# CONFIG_PKG_USING_AP3216C is not set -# CONFIG_PKG_USING_STM32_SDIO is not set - -# -# miscellaneous packages -# -# CONFIG_PKG_USING_LIBCSV is not set -# CONFIG_PKG_USING_OPTPARSE is not set -# CONFIG_PKG_USING_FASTLZ is not set -# CONFIG_PKG_USING_MINILZO is not set -# CONFIG_PKG_USING_QUICKLZ is not set -# CONFIG_PKG_USING_MULTIBUTTON is not set -# CONFIG_PKG_USING_CANFESTIVAL is not set -# CONFIG_PKG_USING_ZLIB is not set -# CONFIG_PKG_USING_DSTR is not set - -# -# sample package -# - -# -# samples: kernel and components samples -# -# CONFIG_PKG_USING_KERNEL_SAMPLES is not set -# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set -# CONFIG_PKG_USING_NETWORK_SAMPLES is not set -# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set - -# -# example package: hello -# -# CONFIG_PKG_USING_HELLO is not set -CONFIG_SOC_FAMILY_STM32=y -CONFIG_SOC_SERIES_STM32F1=y - -# -# Hardware Drivers Config -# -CONFIG_SOC_STM32F103C8=y - -# -# Onboard Peripheral Drivers -# -CONFIG_BSP_USING_USB_TO_USART=y - -# -# On-chip Peripheral Drivers -# -CONFIG_BSP_USING_GPIO=y -CONFIG_BSP_USING_UART=y -CONFIG_BSP_USING_UART1=y -CONFIG_BSP_UART1_RX_USING_DMA=y -# CONFIG_BSP_USING_SPI is not set -# CONFIG_BSP_USING_ADC is not set - -# -# Board extended module Drivers -# diff --git a/bsp/stm32/stm32f103-mini-system/.gitignore b/bsp/stm32/stm32f103-mini-system/.gitignore deleted file mode 100644 index 7221bde019df6157cbf9e42ef5ab8a78420e3b68..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/.gitignore +++ /dev/null @@ -1,42 +0,0 @@ -*.pyc -*.map -*.dblite -*.elf -*.bin -*.hex -*.axf -*.exe -*.pdb -*.idb -*.ilk -*.old -build -Debug -documentation/html -packages/ -*~ -*.o -*.obj -*.out -*.bak -*.dep -*.lib -*.i -*.d -.DS_Stor* -.config 3 -.config 4 -.config 5 -Midea-X1 -*.uimg -GPATH -GRTAGS -GTAGS -.vscode -JLinkLog.txt -JLinkSettings.ini -DebugConfig/ -RTE/ -settings/ -*.uvguix* -cconfig.h diff --git a/bsp/stm32/stm32f103-mini-system/Kconfig b/bsp/stm32/stm32f103-mini-system/Kconfig deleted file mode 100644 index 7a400db91f4a82292908c8b2b99e87e4193f78d0..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/Kconfig +++ /dev/null @@ -1,22 +0,0 @@ -mainmenu "RT-Thread Configuration" - -config BSP_DIR - string - option env="BSP_ROOT" - default "." - -config RTT_DIR - string - option env="RTT_ROOT" - default "../../.." - -config PKGS_DIR - string - option env="PKGS_ROOT" - default "packages" - -source "$RTT_DIR/Kconfig" -source "$PKGS_DIR/Kconfig" -source "../libraries/Kconfig" -source "board/Kconfig" - diff --git a/bsp/stm32/stm32f103-mini-system/README.md b/bsp/stm32/stm32f103-mini-system/README.md deleted file mode 100644 index ee163c4bebf3c4076c3d33e0d83d6aaf3b301f45..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/README.md +++ /dev/null @@ -1,110 +0,0 @@ -# STM32F103C8T6最小系统板 BSP 说明 - -## 简介 - -本文档为 STM32F103C8T6最小系统板 的 BSP (板级支持包) 说明。 - -主要内容如下： - -- 开发板资源介绍 -- BSP 快速上手 -- 进阶使用方法 - -通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。 - -## 开发板介绍 - -STM32F103C8T6最小系统，采用SWD调试接口，可以用3个接口就能完成调试下载的任务，采用了官方建议的负载RTC晶振方案，小体积高频率的STM32实验板 - -开发板外观如下图所示： - -![board](figures/board.png) - -该开发板常用 **板载资源** 如下： - -- MCU：STM32F103C8T6，主频 72MHz，64KB FLASH ，20KB RAM -- 外部 RAM：无 -- 外部 FLASH：无 -- 常用外设 - - LED：1个，DS0（黄色，PC13） -- 常用接口：无 -- 调试接口，SWD调试接口 - -开发板更多详细信息请参考[STM32F103C8T6最小系统板介绍] - -## 外设支持 - -本 BSP 目前对外设的支持情况如下： - -| **板载外设** | **支持情况** | **备注** | -| :----------------- | :----------: | :------------------------------------- | -| 黄色LED | 支持 | PC13 | -| **片上外设** | **支持情况** | **备注** | -| GPIO | 支持 | PA0, PA1... PC15 ---> PIN: 0, 1...47 | -| UART | 支持 | UART1 | -| **扩展模块** | **支持情况** | **备注** | -| | | | - -## 使用说明 - -使用说明分为如下两个章节： - -- 快速上手 - - 本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。 - -- 进阶使用 - - 本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。 - - -### 快速上手 - -本 BSP 为开发者提供 MDK4、MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。 - -#### 硬件连接 - -使用数据线连接开发板到 PC，打开电源开关。 - -#### 编译下载 - -双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。 - -> 工程默认配置使用 J-Link 仿真器下载程序，在通过 J-Link 连接开发板的基础上，点击下载按钮即可下载程序到开发板 - -#### 运行结果 - -下载程序成功之后，系统会自动运行，LED 闪烁 - -连接开发板对应串口到 PC , 在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息: - -```bash - \ | / -- RT - Thread Operating System - / | \ 4.0.1 build Mar 10 2019 - 2006 - 2019 Copyright by rt-thread team -msh > -``` -### 进阶使用 - -此 BSP 默认只开启了 GPIO 和 串口1 的功能，如果需使用 ADC、PWM等更多高级功能，再用 ENV 工具对BSP 进行配置，步骤如下： - -1. 在 bsp 下打开 env 工具。 - -2. 输入`menuconfig`命令配置工程，配置好之后保存退出。 - -3. 输入`pkgs --update`命令更新软件包。 - -4. 输入`scons --target=mdk4/mdk5/iar` 命令重新生成工程。 - -本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32系列BSP外设驱动使用教程.md)。 - -## 注意事项 - -- 只能用USB转TTL连接PC机 ; - -## 联系人信息 - -维护人: - -- [obito0](https://github.com/obito0), 邮箱：<496420502@qq.com> \ No newline at end of file diff --git a/bsp/stm32/stm32f103-mini-system/SConscript b/bsp/stm32/stm32f103-mini-system/SConscript deleted file mode 100644 index 20f7689c53ca71a676748f79187f9764065466c5..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/SConscript +++ /dev/null @@ -1,15 +0,0 @@ -# for module compiling -import os -Import('RTT_ROOT') -from building import * - -cwd = GetCurrentDir() -objs = [] -list = os.listdir(cwd) - -for d in list: - path = os.path.join(cwd, d) - if os.path.isfile(os.path.join(path, 'SConscript')): - objs = objs + SConscript(os.path.join(d, 'SConscript')) - -Return('objs') diff --git a/bsp/stm32/stm32f103-mini-system/SConstruct b/bsp/stm32/stm32f103-mini-system/SConstruct deleted file mode 100644 index 1a9f419db5f2f6009aad0e8e896c318439ba3ed3..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/SConstruct +++ /dev/null @@ -1,60 +0,0 @@ -import os -import sys -import rtconfig - -if os.getenv('RTT_ROOT'): - RTT_ROOT = os.getenv('RTT_ROOT') -else: - RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..') - -sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')] -try: - from building import * -except: - print('Cannot found RT-Thread root directory, please check RTT_ROOT') - print(RTT_ROOT) - exit(-1) - -TARGET = 'rt-thread.' + rtconfig.TARGET_EXT - -DefaultEnvironment(tools=[]) -env = Environment(tools = ['mingw'], - AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS, - CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS, - AR = rtconfig.AR, ARFLAGS = '-rc', - CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS, - LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS) -env.PrependENVPath('PATH', rtconfig.EXEC_PATH) - -if rtconfig.PLATFORM == 'iar': - env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES']) - env.Replace(ARFLAGS = ['']) - env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map') - -Export('RTT_ROOT') -Export('rtconfig') - -SDK_ROOT = os.path.abspath('./') - -if os.path.exists(SDK_ROOT + '/libraries'): - libraries_path_prefix = SDK_ROOT + '/libraries' -else: - libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries' - -SDK_LIB = libraries_path_prefix -Export('SDK_LIB') - -# prepare building environment -objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False) - -stm32_library = 'STM32F1xx_HAL' -rtconfig.BSP_LIBRARY_TYPE = stm32_library - -# include libraries -objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript'))) - -# include drivers -objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript'))) - -# make a building -DoBuilding(TARGET, objs) diff --git a/bsp/stm32/stm32f103-mini-system/applications/SConscript b/bsp/stm32/stm32f103-mini-system/applications/SConscript deleted file mode 100644 index ef1c39fd83245f317e1fb64035e62c169c430c62..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/applications/SConscript +++ /dev/null @@ -1,11 +0,0 @@ -Import('RTT_ROOT') -Import('rtconfig') -from building import * - -cwd = GetCurrentDir() -src = Glob('*.c') -CPPPATH = [cwd, ] - -group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH) - -Return('group') diff --git a/bsp/stm32/stm32f103-mini-system/applications/main.c b/bsp/stm32/stm32f103-mini-system/applications/main.c deleted file mode 100644 index c5fa5a5958ec067de6a046f634ccf0a067cfd22b..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/applications/main.c +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright (c) 2006-2018, RT-Thread Development Team - * - * SPDX-License-Identifier: Apache-2.0 - * - * Change Logs: - * Date Author Notes - * 2019-03-08 obito0 first version - */ - -#include -#include -#include - -/* defined the LED0 pin: PC13 */ -#define LED0_PIN GET_PIN(C, 13) - -int main(void) -{ - int count = 1; - /* set LED0 pin mode to output */ - rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT); - - while (count++) - { - rt_pin_write(LED0_PIN, PIN_HIGH); - rt_thread_mdelay(500); - rt_pin_write(LED0_PIN, PIN_LOW); - rt_thread_mdelay(500); - } - - return RT_EOK; -} diff --git a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/.mxproject deleted file mode 100644 index 934c2d572adc21ca1a1197a57f939c3257929139..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/.mxproject +++ /dev/null @@ -1,14 +0,0 @@ -[PreviousGenFiles] -HeaderPath=F:/rt-thread/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Inc -HeaderFiles=stm32f1xx_it.h;stm32f1xx_hal_conf.h;main.h; -SourcePath=F:/rt-thread/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Src -SourceFiles=stm32f1xx_it.c;stm32f1xx_hal_msp.c;main.c; - -[PreviousLibFiles] -LibFiles=Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_adc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_spi.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_tim_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_uart.h;Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h;Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma_ex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_dma.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_cortex.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_pwr.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash.h;Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_flash_ex.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h;Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h; - -[PreviousUsedKeilFiles] -SourceFiles=..\Src\main.c;..\Src\stm32f1xx_it.c;..\Src\stm32f1xx_hal_msp.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;../\Src/system_stm32f1xx.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_adc_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_spi_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_tim_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_uart.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_rcc_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_dma.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_cortex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_pwr.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_flash_ex.c;../Drivers/STM32F1xx_HAL_Driver/Src/stm32f1xx_hal_gpio_ex.c;../\Src/system_stm32f1xx.c;../Drivers/CMSIS/Device/ST/STM32F1xx/Source/Templates/system_stm32f1xx.c;null; -HeaderPath=..\Drivers\STM32F1xx_HAL_Driver\Inc;..\Drivers\STM32F1xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F1xx\Include;..\Drivers\CMSIS\Include;..\Inc; -CDefines=USE_HAL_DRIVER;STM32F103xB;USE_HAL_DRIVER;STM32F103xB; - diff --git a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/CubeMX_Config.ioc deleted file mode 100644 index 6dfacfbd4bd61ca2edb1720fd0a80a8abb5f0d9d..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/CubeMX_Config.ioc +++ /dev/null @@ -1,140 +0,0 @@ -#MicroXplorer Configuration settings - do not modify -ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_1 -ADC1.IPParameters=Rank-0\#ChannelRegularConversion,master,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,NbrOfConversionFlag -ADC1.NbrOfConversionFlag=1 -ADC1.Rank-0\#ChannelRegularConversion=1 -ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5 -ADC1.master=1 -File.Version=6 -KeepUserPlacement=false -Mcu.Family=STM32F1 -Mcu.IP0=ADC1 -Mcu.IP1=NVIC -Mcu.IP2=RCC -Mcu.IP3=SPI1 -Mcu.IP4=SYS -Mcu.IP5=USART1 -Mcu.IPNb=6 -Mcu.Name=STM32F103C(8-B)Tx -Mcu.Package=LQFP48 -Mcu.Pin0=PC14-OSC32_IN -Mcu.Pin1=PC15-OSC32_OUT -Mcu.Pin10=PA13 -Mcu.Pin11=PA14 -Mcu.Pin12=VP_SYS_VS_Systick -Mcu.Pin2=PD0-OSC_IN -Mcu.Pin3=PD1-OSC_OUT -Mcu.Pin4=PA1 -Mcu.Pin5=PA5 -Mcu.Pin6=PA6 -Mcu.Pin7=PA7 -Mcu.Pin8=PA9 -Mcu.Pin9=PA10 -Mcu.PinsNb=13 -Mcu.ThirdPartyNb=0 -Mcu.UserConstants= -Mcu.UserName=STM32F103C8Tx -MxCube.Version=5.2.1 -MxDb.Version=DB.5.0.21 -NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 -NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false -NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true -NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false -PA1.Signal=ADCx_IN1 -PA10.Mode=Asynchronous -PA10.Signal=USART1_RX -PA13.Mode=Serial_Wire -PA13.Signal=SYS_JTMS-SWDIO -PA14.Mode=Serial_Wire -PA14.Signal=SYS_JTCK-SWCLK -PA5.Mode=Full_Duplex_Master -PA5.Signal=SPI1_SCK -PA6.Mode=Full_Duplex_Master -PA6.Signal=SPI1_MISO -PA7.Mode=Full_Duplex_Master -PA7.Signal=SPI1_MOSI -PA9.Mode=Asynchronous -PA9.Signal=USART1_TX -PC14-OSC32_IN.Mode=LSE-External-Oscillator -PC14-OSC32_IN.Signal=RCC_OSC32_IN -PC15-OSC32_OUT.Mode=LSE-External-Oscillator -PC15-OSC32_OUT.Signal=RCC_OSC32_OUT -PCC.Checker=false -PCC.Line=STM32F103 -PCC.MCU=STM32F103C(8-B)Tx -PCC.PartNumber=STM32F103C8Tx -PCC.Seq0=0 -PCC.Series=STM32F1 -PCC.Temperature=25 -PCC.Vdd=3.3 -PD0-OSC_IN.Mode=HSE-External-Oscillator -PD0-OSC_IN.Signal=RCC_OSC_IN -PD1-OSC_OUT.Mode=HSE-External-Oscillator -PD1-OSC_OUT.Signal=RCC_OSC_OUT -PinOutPanel.RotationAngle=0 -ProjectManager.AskForMigrate=true -ProjectManager.BackupPrevious=false -ProjectManager.CompilerOptimize=6 -ProjectManager.ComputerToolchain=false -ProjectManager.CoupleFile=false -ProjectManager.CustomerFirmwarePackage= -ProjectManager.DefaultFWLocation=true -ProjectManager.DeletePrevious=true -ProjectManager.DeviceId=STM32F103C8Tx -ProjectManager.FirmwarePackage=STM32Cube FW_F1 V1.7.0 -ProjectManager.FreePins=false -ProjectManager.HalAssertFull=false -ProjectManager.HeapSize=0x200 -ProjectManager.KeepUserCode=true -ProjectManager.LastFirmware=true -ProjectManager.LibraryCopy=0 -ProjectManager.MainLocation=Src -ProjectManager.NoMain=false -ProjectManager.PreviousToolchain= -ProjectManager.ProjectBuild=false -ProjectManager.ProjectFileName=CubeMX_Config.ioc -ProjectManager.ProjectName=CubeMX_Config -ProjectManager.StackSize=0x400 -ProjectManager.TargetToolchain=MDK-ARM V5 -ProjectManager.ToolChainLocation= -ProjectManager.UnderRoot=false -ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_ADC1_Init-ADC1-false-HAL-true,5-MX_SPI1_Init-SPI1-false-HAL-true -RCC.ADCFreqValue=8000000 -RCC.AHBFreq_Value=16000000 -RCC.APB1CLKDivider=RCC_HCLK_DIV2 -RCC.APB1Freq_Value=8000000 -RCC.APB1TimFreq_Value=16000000 -RCC.APB2Freq_Value=16000000 -RCC.APB2TimFreq_Value=16000000 -RCC.FCLKCortexFreq_Value=16000000 -RCC.FamilyName=M -RCC.HCLKFreq_Value=16000000 -RCC.IPParameters=ADCFreqValue,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLMCOFreq_Value,PLLSourceVirtual,SYSCLKFreq_VALUE,SYSCLKSource,TimSysFreq_Value,USBFreq_Value,VCOOutput2Freq_Value -RCC.MCOFreq_Value=16000000 -RCC.PLLCLKFreq_Value=16000000 -RCC.PLLMCOFreq_Value=8000000 -RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE -RCC.SYSCLKFreq_VALUE=16000000 -RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK -RCC.TimSysFreq_Value=16000000 -RCC.USBFreq_Value=16000000 -RCC.VCOOutput2Freq_Value=8000000 -SH.ADCx_IN1.0=ADC1_IN1,IN1 -SH.ADCx_IN1.ConfNb=1 -SPI1.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_8 -SPI1.CalculateBaudRate=2.0 MBits/s -SPI1.Direction=SPI_DIRECTION_2LINES -SPI1.IPParameters=VirtualType,Mode,Direction,BaudRatePrescaler,CalculateBaudRate -SPI1.Mode=SPI_MODE_MASTER -SPI1.VirtualType=VM_MASTER -USART1.IPParameters=VirtualMode -USART1.VirtualMode=VM_ASYNC -VP_SYS_VS_Systick.Mode=SysTick -VP_SYS_VS_Systick.Signal=SYS_VS_Systick -board=custom diff --git a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Inc/main.h b/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Inc/main.h deleted file mode 100644 index 75cb6f9a15b6f5d05ee532f822564472b48b7957..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Inc/main.h +++ /dev/null @@ -1,71 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : main.h - * @brief : Header for main.c file. - * This file contains the common defines of the application. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __MAIN_H -#define __MAIN_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f1xx_hal.h" - -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Exported types ------------------------------------------------------------*/ -/* USER CODE BEGIN ET */ - -/* USER CODE END ET */ - -/* Exported constants --------------------------------------------------------*/ -/* USER CODE BEGIN EC */ - -/* USER CODE END EC */ - -/* Exported macro ------------------------------------------------------------*/ -/* USER CODE BEGIN EM */ - -/* USER CODE END EM */ - -/* Exported functions prototypes ---------------------------------------------*/ -void Error_Handler(void); - -/* USER CODE BEGIN EFP */ - -/* USER CODE END EFP */ - -/* Private defines -----------------------------------------------------------*/ -/* USER CODE BEGIN Private defines */ - -/* USER CODE END Private defines */ - -#ifdef __cplusplus -} -#endif - -#endif /* __MAIN_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Inc/stm32f1xx_hal_conf.h b/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Inc/stm32f1xx_hal_conf.h deleted file mode 100644 index 467a07d1ca746051ffc77e93a423fc4637cd220f..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Inc/stm32f1xx_hal_conf.h +++ /dev/null @@ -1,370 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f1xx_hal_conf.h - * @brief HAL configuration file. - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2019 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_HAL_CONF_H -#define __STM32F1xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ - -#define HAL_MODULE_ENABLED -#define HAL_ADC_MODULE_ENABLED -/*#define HAL_CRYP_MODULE_ENABLED */ -/*#define HAL_CAN_MODULE_ENABLED */ -/*#define HAL_CEC_MODULE_ENABLED */ -/*#define HAL_CORTEX_MODULE_ENABLED */ -/*#define HAL_CRC_MODULE_ENABLED */ -/*#define HAL_DAC_MODULE_ENABLED */ -/*#define HAL_DMA_MODULE_ENABLED */ -/*#define HAL_ETH_MODULE_ENABLED */ -/*#define HAL_FLASH_MODULE_ENABLED */ -#define HAL_GPIO_MODULE_ENABLED -/*#define HAL_I2C_MODULE_ENABLED */ -/*#define HAL_I2S_MODULE_ENABLED */ -/*#define HAL_IRDA_MODULE_ENABLED */ -/*#define HAL_IWDG_MODULE_ENABLED */ -/*#define HAL_NOR_MODULE_ENABLED */ -/*#define HAL_NAND_MODULE_ENABLED */ -/*#define HAL_PCCARD_MODULE_ENABLED */ -/*#define HAL_PCD_MODULE_ENABLED */ -/*#define HAL_HCD_MODULE_ENABLED */ -/*#define HAL_PWR_MODULE_ENABLED */ -/*#define HAL_RCC_MODULE_ENABLED */ -/*#define HAL_RTC_MODULE_ENABLED */ -/*#define HAL_SD_MODULE_ENABLED */ -/*#define HAL_MMC_MODULE_ENABLED */ -/*#define HAL_SDRAM_MODULE_ENABLED */ -/*#define HAL_SMARTCARD_MODULE_ENABLED */ -#define HAL_SPI_MODULE_ENABLED -/*#define HAL_SRAM_MODULE_ENABLED */ -/*#define HAL_TIM_MODULE_ENABLED */ -#define HAL_UART_MODULE_ENABLED -/*#define HAL_USART_MODULE_ENABLED */ -/*#define HAL_WWDG_MODULE_ENABLED */ -/*#define HAL_EXTI_MODULE_ENABLED */ - -#define HAL_CORTEX_MODULE_ENABLED -#define HAL_DMA_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED - -/* ########################## Oscillator Values adaptation ####################*/ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE 40000U /*!< LSI Typical Value in Hz */ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature. */ - -/** - * @brief External Low Speed oscillator (LSE) value. - * This value is used by the UART, RTC HAL module to compute the system frequency - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ -#endif /* LSE_VALUE */ - -#if !defined (LSE_STARTUP_TIMEOUT) - #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ -#endif /* LSE_STARTUP_TIMEOUT */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0) /*!< tick interrupt priority (lowest by default) */ -#define USE_RTOS 0 -#define PREFETCH_ENABLE 1 - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1U */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2 -#define MAC_ADDR1 0 -#define MAC_ADDR2 0 -#define MAC_ADDR3 0 -#define MAC_ADDR4 0 -#define MAC_ADDR5 0 - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)8) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848_PHY_ADDRESS Address*/ -#define DP83848_PHY_ADDRESS 0x01U -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x000000FF) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) - -#define PHY_READ_TO ((uint32_t)0x0000FFFF) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ -#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ - -#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f1xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_EXTI_MODULE_ENABLED - #include "stm32f1xx_hal_exti.h" -#endif /* HAL_EXTI_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f1xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f1xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f1xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f1xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f1xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f1xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f1xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f1xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f1xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f1xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f1xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f1xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f1xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f1xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f1xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f1xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f1xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f1xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f1xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_MMC_MODULE_ENABLED - #include "stm32f1xx_hal_mmc.h" -#endif /* HAL_MMC_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f1xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f1xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f1xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f1xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f1xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f1xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f1xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f1xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f1xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f1xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0U) -#endif /* USE_FULL_ASSERT */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_HAL_CONF_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Inc/stm32f1xx_it.h b/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Inc/stm32f1xx_it.h deleted file mode 100644 index 101d8aa728528d3e85c707c4d2276fa5d3b54535..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Inc/stm32f1xx_it.h +++ /dev/null @@ -1,69 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file stm32f1xx_it.h - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F1xx_IT_H -#define __STM32F1xx_IT_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Exported types ------------------------------------------------------------*/ -/* USER CODE BEGIN ET */ - -/* USER CODE END ET */ - -/* Exported constants --------------------------------------------------------*/ -/* USER CODE BEGIN EC */ - -/* USER CODE END EC */ - -/* Exported macro ------------------------------------------------------------*/ -/* USER CODE BEGIN EM */ - -/* USER CODE END EM */ - -/* Exported functions prototypes ---------------------------------------------*/ -void NMI_Handler(void); -void HardFault_Handler(void); -void MemManage_Handler(void); -void BusFault_Handler(void); -void UsageFault_Handler(void); -void SVC_Handler(void); -void DebugMon_Handler(void); -void PendSV_Handler(void); -void SysTick_Handler(void); -/* USER CODE BEGIN EFP */ - -/* USER CODE END EFP */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F1xx_IT_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Src/main.c b/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Src/main.c deleted file mode 100644 index 0fb8a9747d5412b2c691b00fde1435e13bbf35ee..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Src/main.c +++ /dev/null @@ -1,325 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file : main.c - * @brief : Main program body - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" - -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Private typedef -----------------------------------------------------------*/ -/* USER CODE BEGIN PTD */ - -/* USER CODE END PTD */ - -/* Private define ------------------------------------------------------------*/ -/* USER CODE BEGIN PD */ - -/* USER CODE END PD */ - -/* Private macro -------------------------------------------------------------*/ -/* USER CODE BEGIN PM */ - -/* USER CODE END PM */ - -/* Private variables ---------------------------------------------------------*/ -ADC_HandleTypeDef hadc1; - -SPI_HandleTypeDef hspi1; - -UART_HandleTypeDef huart1; - -/* USER CODE BEGIN PV */ - -/* USER CODE END PV */ - -/* Private function prototypes -----------------------------------------------*/ -void SystemClock_Config(void); -static void MX_GPIO_Init(void); -static void MX_USART1_UART_Init(void); -static void MX_ADC1_Init(void); -static void MX_SPI1_Init(void); -/* USER CODE BEGIN PFP */ - -/* USER CODE END PFP */ - -/* Private user code ---------------------------------------------------------*/ -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ - -/** - * @brief The application entry point. - * @retval int - */ -int main(void) -{ - /* USER CODE BEGIN 1 */ - - /* USER CODE END 1 */ - - - /* MCU Configuration--------------------------------------------------------*/ - - /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ - HAL_Init(); - - /* USER CODE BEGIN Init */ - - /* USER CODE END Init */ - - /* Configure the system clock */ - SystemClock_Config(); - - /* USER CODE BEGIN SysInit */ - - /* USER CODE END SysInit */ - - /* Initialize all configured peripherals */ - MX_GPIO_Init(); - MX_USART1_UART_Init(); - MX_ADC1_Init(); - MX_SPI1_Init(); - /* USER CODE BEGIN 2 */ - - /* USER CODE END 2 */ - - /* Infinite loop */ - /* USER CODE BEGIN WHILE */ - while (1) - { - /* USER CODE END WHILE */ - - /* USER CODE BEGIN 3 */ - } - /* USER CODE END 3 */ -} - -/** - * @brief System Clock Configuration - * @retval None - */ -void SystemClock_Config(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_PeriphCLKInitTypeDef PeriphClkInit = {0}; - - /** Initializes the CPU, AHB and APB busses clocks - */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL2; - if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) - { - Error_Handler(); - } - /** Initializes the CPU, AHB and APB busses clocks - */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK - |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) - { - Error_Handler(); - } - PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_ADC; - PeriphClkInit.AdcClockSelection = RCC_ADCPCLK2_DIV2; - if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) - { - Error_Handler(); - } -} - -/** - * @brief ADC1 Initialization Function - * @param None - * @retval None - */ -static void MX_ADC1_Init(void) -{ - - /* USER CODE BEGIN ADC1_Init 0 */ - - /* USER CODE END ADC1_Init 0 */ - - ADC_ChannelConfTypeDef sConfig = {0}; - - /* USER CODE BEGIN ADC1_Init 1 */ - - /* USER CODE END ADC1_Init 1 */ - /** Common config - */ - hadc1.Instance = ADC1; - hadc1.Init.ScanConvMode = ADC_SCAN_DISABLE; - hadc1.Init.ContinuousConvMode = DISABLE; - hadc1.Init.DiscontinuousConvMode = DISABLE; - hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START; - hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT; - hadc1.Init.NbrOfConversion = 1; - if (HAL_ADC_Init(&hadc1) != HAL_OK) - { - Error_Handler(); - } - /** Configure Regular Channel - */ - sConfig.Channel = ADC_CHANNEL_1; - sConfig.Rank = ADC_REGULAR_RANK_1; - sConfig.SamplingTime = ADC_SAMPLETIME_1CYCLE_5; - if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK) - { - Error_Handler(); - } - /* USER CODE BEGIN ADC1_Init 2 */ - - /* USER CODE END ADC1_Init 2 */ - -} - -/** - * @brief SPI1 Initialization Function - * @param None - * @retval None - */ -static void MX_SPI1_Init(void) -{ - - /* USER CODE BEGIN SPI1_Init 0 */ - - /* USER CODE END SPI1_Init 0 */ - - /* USER CODE BEGIN SPI1_Init 1 */ - - /* USER CODE END SPI1_Init 1 */ - /* SPI1 parameter configuration*/ - hspi1.Instance = SPI1; - hspi1.Init.Mode = SPI_MODE_MASTER; - hspi1.Init.Direction = SPI_DIRECTION_2LINES; - hspi1.Init.DataSize = SPI_DATASIZE_8BIT; - hspi1.Init.CLKPolarity = SPI_POLARITY_LOW; - hspi1.Init.CLKPhase = SPI_PHASE_1EDGE; - hspi1.Init.NSS = SPI_NSS_SOFT; - hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8; - hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB; - hspi1.Init.TIMode = SPI_TIMODE_DISABLE; - hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; - hspi1.Init.CRCPolynomial = 10; - if (HAL_SPI_Init(&hspi1) != HAL_OK) - { - Error_Handler(); - } - /* USER CODE BEGIN SPI1_Init 2 */ - - /* USER CODE END SPI1_Init 2 */ - -} - -/** - * @brief USART1 Initialization Function - * @param None - * @retval None - */ -static void MX_USART1_UART_Init(void) -{ - - /* USER CODE BEGIN USART1_Init 0 */ - - /* USER CODE END USART1_Init 0 */ - - /* USER CODE BEGIN USART1_Init 1 */ - - /* USER CODE END USART1_Init 1 */ - huart1.Instance = USART1; - huart1.Init.BaudRate = 115200; - huart1.Init.WordLength = UART_WORDLENGTH_8B; - huart1.Init.StopBits = UART_STOPBITS_1; - huart1.Init.Parity = UART_PARITY_NONE; - huart1.Init.Mode = UART_MODE_TX_RX; - huart1.Init.HwFlowCtl = UART_HWCONTROL_NONE; - huart1.Init.OverSampling = UART_OVERSAMPLING_16; - if (HAL_UART_Init(&huart1) != HAL_OK) - { - Error_Handler(); - } - /* USER CODE BEGIN USART1_Init 2 */ - - /* USER CODE END USART1_Init 2 */ - -} - -/** - * @brief GPIO Initialization Function - * @param None - * @retval None - */ -static void MX_GPIO_Init(void) -{ - - /* GPIO Ports Clock Enable */ - __HAL_RCC_GPIOC_CLK_ENABLE(); - __HAL_RCC_GPIOD_CLK_ENABLE(); - __HAL_RCC_GPIOA_CLK_ENABLE(); - -} - -/* USER CODE BEGIN 4 */ - -/* USER CODE END 4 */ - -/** - * @brief This function is executed in case of error occurrence. - * @retval None - */ -void Error_Handler(void) -{ - /* USER CODE BEGIN Error_Handler_Debug */ - /* User can add his own implementation to report the HAL error return state */ - - /* USER CODE END Error_Handler_Debug */ -} - -#ifdef USE_FULL_ASSERT -/** - * @brief Reports the name of the source file and the source line number - * where the assert_param error has occurred. - * @param file: pointer to the source file name - * @param line: assert_param error line source number - * @retval None - */ -void assert_failed(uint8_t *file, uint32_t line) -{ - /* USER CODE BEGIN 6 */ - /* User can add his own implementation to report the file name and line number, - tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ - /* USER CODE END 6 */ -} -#endif /* USE_FULL_ASSERT */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c b/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c deleted file mode 100644 index 663b3021faa336a21093465ba5fd4b76dcc57241..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Src/stm32f1xx_hal_msp.c +++ /dev/null @@ -1,286 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * File Name : stm32f1xx_hal_msp.c - * Description : This file provides code for the MSP Initialization - * and de-Initialization codes. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -/* USER CODE BEGIN Includes */ - -/* USER CODE END Includes */ - -/* Private typedef -----------------------------------------------------------*/ -/* USER CODE BEGIN TD */ - -/* USER CODE END TD */ - -/* Private define ------------------------------------------------------------*/ -/* USER CODE BEGIN Define */ - -/* USER CODE END Define */ - -/* Private macro -------------------------------------------------------------*/ -/* USER CODE BEGIN Macro */ - -/* USER CODE END Macro */ - -/* Private variables ---------------------------------------------------------*/ -/* USER CODE BEGIN PV */ - -/* USER CODE END PV */ - -/* Private function prototypes -----------------------------------------------*/ -/* USER CODE BEGIN PFP */ - -/* USER CODE END PFP */ - -/* External functions --------------------------------------------------------*/ -/* USER CODE BEGIN ExternalFunctions */ - -/* USER CODE END ExternalFunctions */ - -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ -/** - * Initializes the Global MSP. - */ -void HAL_MspInit(void) -{ - /* USER CODE BEGIN MspInit 0 */ - - /* USER CODE END MspInit 0 */ - - __HAL_RCC_AFIO_CLK_ENABLE(); - __HAL_RCC_PWR_CLK_ENABLE(); - - /* System interrupt init*/ - - /** NOJTAG: JTAG-DP Disabled and SW-DP Enabled - */ - __HAL_AFIO_REMAP_SWJ_NOJTAG(); - - /* USER CODE BEGIN MspInit 1 */ - - /* USER CODE END MspInit 1 */ -} - -/** -* @brief ADC MSP Initialization -* This function configures the hardware resources used in this example -* @param hadc: ADC handle pointer -* @retval None -*/ -void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc) -{ - GPIO_InitTypeDef GPIO_InitStruct = {0}; - if(hadc->Instance==ADC1) - { - /* USER CODE BEGIN ADC1_MspInit 0 */ - - /* USER CODE END ADC1_MspInit 0 */ - /* Peripheral clock enable */ - __HAL_RCC_ADC1_CLK_ENABLE(); - - __HAL_RCC_GPIOA_CLK_ENABLE(); - /**ADC1 GPIO Configuration - PA1 ------> ADC1_IN1 - */ - GPIO_InitStruct.Pin = GPIO_PIN_1; - GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* USER CODE BEGIN ADC1_MspInit 1 */ - - /* USER CODE END ADC1_MspInit 1 */ - } - -} - -/** -* @brief ADC MSP De-Initialization -* This function freeze the hardware resources used in this example -* @param hadc: ADC handle pointer -* @retval None -*/ -void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc) -{ - if(hadc->Instance==ADC1) - { - /* USER CODE BEGIN ADC1_MspDeInit 0 */ - - /* USER CODE END ADC1_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_ADC1_CLK_DISABLE(); - - /**ADC1 GPIO Configuration - PA1 ------> ADC1_IN1 - */ - HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1); - - /* USER CODE BEGIN ADC1_MspDeInit 1 */ - - /* USER CODE END ADC1_MspDeInit 1 */ - } - -} - -/** -* @brief SPI MSP Initialization -* This function configures the hardware resources used in this example -* @param hspi: SPI handle pointer -* @retval None -*/ -void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi) -{ - GPIO_InitTypeDef GPIO_InitStruct = {0}; - if(hspi->Instance==SPI1) - { - /* USER CODE BEGIN SPI1_MspInit 0 */ - - /* USER CODE END SPI1_MspInit 0 */ - /* Peripheral clock enable */ - __HAL_RCC_SPI1_CLK_ENABLE(); - - __HAL_RCC_GPIOA_CLK_ENABLE(); - /**SPI1 GPIO Configuration - PA5 ------> SPI1_SCK - PA6 ------> SPI1_MISO - PA7 ------> SPI1_MOSI - */ - GPIO_InitStruct.Pin = GPIO_PIN_5|GPIO_PIN_7; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - GPIO_InitStruct.Pin = GPIO_PIN_6; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* USER CODE BEGIN SPI1_MspInit 1 */ - - /* USER CODE END SPI1_MspInit 1 */ - } - -} - -/** -* @brief SPI MSP De-Initialization -* This function freeze the hardware resources used in this example -* @param hspi: SPI handle pointer -* @retval None -*/ -void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi) -{ - if(hspi->Instance==SPI1) - { - /* USER CODE BEGIN SPI1_MspDeInit 0 */ - - /* USER CODE END SPI1_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_SPI1_CLK_DISABLE(); - - /**SPI1 GPIO Configuration - PA5 ------> SPI1_SCK - PA6 ------> SPI1_MISO - PA7 ------> SPI1_MOSI - */ - HAL_GPIO_DeInit(GPIOA, GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7); - - /* USER CODE BEGIN SPI1_MspDeInit 1 */ - - /* USER CODE END SPI1_MspDeInit 1 */ - } - -} - -/** -* @brief UART MSP Initialization -* This function configures the hardware resources used in this example -* @param huart: UART handle pointer -* @retval None -*/ -void HAL_UART_MspInit(UART_HandleTypeDef* huart) -{ - GPIO_InitTypeDef GPIO_InitStruct = {0}; - if(huart->Instance==USART1) - { - /* USER CODE BEGIN USART1_MspInit 0 */ - - /* USER CODE END USART1_MspInit 0 */ - /* Peripheral clock enable */ - __HAL_RCC_USART1_CLK_ENABLE(); - - __HAL_RCC_GPIOA_CLK_ENABLE(); - /**USART1 GPIO Configuration - PA9 ------> USART1_TX - PA10 ------> USART1_RX - */ - GPIO_InitStruct.Pin = GPIO_PIN_9; - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - GPIO_InitStruct.Pin = GPIO_PIN_10; - GPIO_InitStruct.Mode = GPIO_MODE_INPUT; - GPIO_InitStruct.Pull = GPIO_NOPULL; - HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); - - /* USER CODE BEGIN USART1_MspInit 1 */ - - /* USER CODE END USART1_MspInit 1 */ - } - -} - -/** -* @brief UART MSP De-Initialization -* This function freeze the hardware resources used in this example -* @param huart: UART handle pointer -* @retval None -*/ -void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) -{ - if(huart->Instance==USART1) - { - /* USER CODE BEGIN USART1_MspDeInit 0 */ - - /* USER CODE END USART1_MspDeInit 0 */ - /* Peripheral clock disable */ - __HAL_RCC_USART1_CLK_DISABLE(); - - /**USART1 GPIO Configuration - PA9 ------> USART1_TX - PA10 ------> USART1_RX - */ - HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10); - - /* USER CODE BEGIN USART1_MspDeInit 1 */ - - /* USER CODE END USART1_MspDeInit 1 */ - } - -} - -/* USER CODE BEGIN 1 */ - -/* USER CODE END 1 */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Src/stm32f1xx_it.c b/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Src/stm32f1xx_it.c deleted file mode 100644 index 6a95ce4baed24c52b355d89d804cb8563299c234..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Src/stm32f1xx_it.c +++ /dev/null @@ -1,203 +0,0 @@ -/* USER CODE BEGIN Header */ -/** - ****************************************************************************** - * @file stm32f1xx_it.c - * @brief Interrupt Service Routines. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2019 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ -/* USER CODE END Header */ - -/* Includes ------------------------------------------------------------------*/ -#include "main.h" -#include "stm32f1xx_it.h" -/* Private includes ----------------------------------------------------------*/ -/* USER CODE BEGIN Includes */ -/* USER CODE END Includes */ - -/* Private typedef -----------------------------------------------------------*/ -/* USER CODE BEGIN TD */ - -/* USER CODE END TD */ - -/* Private define ------------------------------------------------------------*/ -/* USER CODE BEGIN PD */ - -/* USER CODE END PD */ - -/* Private macro -------------------------------------------------------------*/ -/* USER CODE BEGIN PM */ - -/* USER CODE END PM */ - -/* Private variables ---------------------------------------------------------*/ -/* USER CODE BEGIN PV */ - -/* USER CODE END PV */ - -/* Private function prototypes -----------------------------------------------*/ -/* USER CODE BEGIN PFP */ - -/* USER CODE END PFP */ - -/* Private user code ---------------------------------------------------------*/ -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ - -/* External variables --------------------------------------------------------*/ - -/* USER CODE BEGIN EV */ - -/* USER CODE END EV */ - -/******************************************************************************/ -/* Cortex-M3 Processor Interruption and Exception Handlers */ -/******************************************************************************/ -/** - * @brief This function handles Non maskable interrupt. - */ -void NMI_Handler(void) -{ - /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ - - /* USER CODE END NonMaskableInt_IRQn 0 */ - /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ - - /* USER CODE END NonMaskableInt_IRQn 1 */ -} - -/** - * @brief This function handles Hard fault interrupt. - */ -void HardFault_Handler(void) -{ - /* USER CODE BEGIN HardFault_IRQn 0 */ - - /* USER CODE END HardFault_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_HardFault_IRQn 0 */ - /* USER CODE END W1_HardFault_IRQn 0 */ - } -} - -/** - * @brief This function handles Memory management fault. - */ -void MemManage_Handler(void) -{ - /* USER CODE BEGIN MemoryManagement_IRQn 0 */ - - /* USER CODE END MemoryManagement_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ - /* USER CODE END W1_MemoryManagement_IRQn 0 */ - } -} - -/** - * @brief This function handles Prefetch fault, memory access fault. - */ -void BusFault_Handler(void) -{ - /* USER CODE BEGIN BusFault_IRQn 0 */ - - /* USER CODE END BusFault_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_BusFault_IRQn 0 */ - /* USER CODE END W1_BusFault_IRQn 0 */ - } -} - -/** - * @brief This function handles Undefined instruction or illegal state. - */ -void UsageFault_Handler(void) -{ - /* USER CODE BEGIN UsageFault_IRQn 0 */ - - /* USER CODE END UsageFault_IRQn 0 */ - while (1) - { - /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ - /* USER CODE END W1_UsageFault_IRQn 0 */ - } -} - -/** - * @brief This function handles System service call via SWI instruction. - */ -void SVC_Handler(void) -{ - /* USER CODE BEGIN SVCall_IRQn 0 */ - - /* USER CODE END SVCall_IRQn 0 */ - /* USER CODE BEGIN SVCall_IRQn 1 */ - - /* USER CODE END SVCall_IRQn 1 */ -} - -/** - * @brief This function handles Debug monitor. - */ -void DebugMon_Handler(void) -{ - /* USER CODE BEGIN DebugMonitor_IRQn 0 */ - - /* USER CODE END DebugMonitor_IRQn 0 */ - /* USER CODE BEGIN DebugMonitor_IRQn 1 */ - - /* USER CODE END DebugMonitor_IRQn 1 */ -} - -/** - * @brief This function handles Pendable request for system service. - */ -void PendSV_Handler(void) -{ - /* USER CODE BEGIN PendSV_IRQn 0 */ - - /* USER CODE END PendSV_IRQn 0 */ - /* USER CODE BEGIN PendSV_IRQn 1 */ - - /* USER CODE END PendSV_IRQn 1 */ -} - -/** - * @brief This function handles System tick timer. - */ -void SysTick_Handler(void) -{ - /* USER CODE BEGIN SysTick_IRQn 0 */ - - /* USER CODE END SysTick_IRQn 0 */ - HAL_IncTick(); - /* USER CODE BEGIN SysTick_IRQn 1 */ - - /* USER CODE END SysTick_IRQn 1 */ -} - -/******************************************************************************/ -/* STM32F1xx Peripheral Interrupt Handlers */ -/* Add here the Interrupt Handlers for the used peripherals. */ -/* For the available peripheral interrupt handler names, */ -/* please refer to the startup file (startup_stm32f1xx.s). */ -/******************************************************************************/ - -/* USER CODE BEGIN 1 */ - -/* USER CODE END 1 */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Src/system_stm32f1xx.c b/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Src/system_stm32f1xx.c deleted file mode 100644 index af3759a3b63a876025c29823c8d69a8566155a90..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/CubeMX_Config/Src/system_stm32f1xx.c +++ /dev/null @@ -1,448 +0,0 @@ -/** - ****************************************************************************** - * @file system_stm32f1xx.c - * @author MCD Application Team - * @version V4.2.0 - * @date 31-March-2017 - * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. - * - * 1. This file provides two functions and one global variable to be called from - * user application: - * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier - * factors, AHB/APBx prescalers and Flash settings). - * This function is called at startup just after reset and - * before branch to main program. This call is made inside - * the "startup_stm32f1xx_xx.s" file. - * - * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used - * by the user application to setup the SysTick - * timer or configure other parameters. - * - * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must - * be called whenever the core clock is changed - * during program execution. - * - * 2. After each device reset the HSI (8 MHz) is used as system clock source. - * Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to - * configure the system clock before to branch to main program. - * - * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on - * the product used), refer to "HSE_VALUE". - * When HSE is used as system clock source, directly or through PLL, and you - * are using different crystal you have to adapt the HSE value to your own - * configuration. - * - ****************************************************************************** - * @attention - * - *

© COPYRIGHT(c) 2017 STMicroelectronics

- * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f1xx_system - * @{ - */ - -/** @addtogroup STM32F1xx_System_Private_Includes - * @{ - */ - -#include "stm32f1xx.h" - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Defines - * @{ - */ - -#if !defined (HSE_VALUE) - #define HSE_VALUE 8000000U /*!< Default value of the External oscillator in Hz. - This value can be provided and adapted by the user application. */ -#endif /* HSE_VALUE */ - -#if !defined (HSI_VALUE) - #define HSI_VALUE 8000000U /*!< Default value of the Internal oscillator in Hz. - This value can be provided and adapted by the user application. */ -#endif /* HSI_VALUE */ - -/*!< Uncomment the following line if you need to use external SRAM */ -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) -/* #define DATA_IN_ExtSRAM */ -#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ - -/*!< Uncomment the following line if you need to relocate your vector Table in - Internal SRAM. */ -/* #define VECT_TAB_SRAM */ -#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field. - This value must be a multiple of 0x200. */ - - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Variables - * @{ - */ - -/******************************************************************************* -* Clock Definitions -*******************************************************************************/ -#if defined(STM32F100xB) ||defined(STM32F100xE) - uint32_t SystemCoreClock = 24000000U; /*!< System Clock Frequency (Core Clock) */ -#else /*!< HSI Selected as System Clock source */ - uint32_t SystemCoreClock = 72000000U; /*!< System Clock Frequency (Core Clock) */ -#endif - -const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; -const uint8_t APBPrescTable[8U] = {0, 0, 0, 0, 1, 2, 3, 4}; - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes - * @{ - */ - -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) -#ifdef DATA_IN_ExtSRAM - static void SystemInit_ExtMemCtl(void); -#endif /* DATA_IN_ExtSRAM */ -#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ - -/** - * @} - */ - -/** @addtogroup STM32F1xx_System_Private_Functions - * @{ - */ - -/** - * @brief Setup the microcontroller system - * Initialize the Embedded Flash Interface, the PLL and update the - * SystemCoreClock variable. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -void SystemInit (void) -{ - /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ - /* Set HSION bit */ - RCC->CR |= 0x00000001U; - - /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ -#if !defined(STM32F105xC) && !defined(STM32F107xC) - RCC->CFGR &= 0xF8FF0000U; -#else - RCC->CFGR &= 0xF0FF0000U; -#endif /* STM32F105xC */ - - /* Reset HSEON, CSSON and PLLON bits */ - RCC->CR &= 0xFEF6FFFFU; - - /* Reset HSEBYP bit */ - RCC->CR &= 0xFFFBFFFFU; - - /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ - RCC->CFGR &= 0xFF80FFFFU; - -#if defined(STM32F105xC) || defined(STM32F107xC) - /* Reset PLL2ON and PLL3ON bits */ - RCC->CR &= 0xEBFFFFFFU; - - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x00FF0000U; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000U; -#elif defined(STM32F100xB) || defined(STM32F100xE) - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000U; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000U; -#else - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000U; -#endif /* STM32F105xC */ - -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) - #ifdef DATA_IN_ExtSRAM - SystemInit_ExtMemCtl(); - #endif /* DATA_IN_ExtSRAM */ -#endif - -#ifdef VECT_TAB_SRAM - SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ -#else - SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ -#endif -} - -/** - * @brief Update SystemCoreClock variable according to Clock Register Values. - * The SystemCoreClock variable contains the core clock (HCLK), it can - * be used by the user application to setup the SysTick timer or configure - * other parameters. - * - * @note Each time the core clock (HCLK) changes, this function must be called - * to update SystemCoreClock variable value. Otherwise, any configuration - * based on this variable will be incorrect. - * - * @note - The system frequency computed by this function is not the real - * frequency in the chip. It is calculated based on the predefined - * constant and the selected clock source: - * - * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) - * - * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) - * - * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) - * or HSI_VALUE(*) multiplied by the PLL factors. - * - * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz) but the real value may vary depending on the variations - * in voltage and temperature. - * - * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value - * 8 MHz or 25 MHz, depending on the product used), user has to ensure - * that HSE_VALUE is same as the real frequency of the crystal used. - * Otherwise, this function may have wrong result. - * - * - The result of this function could be not correct when using fractional - * value for HSE crystal. - * @param None - * @retval None - */ -void SystemCoreClockUpdate (void) -{ - uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U; - -#if defined(STM32F105xC) || defined(STM32F107xC) - uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U; -#endif /* STM32F105xC */ - -#if defined(STM32F100xB) || defined(STM32F100xE) - uint32_t prediv1factor = 0U; -#endif /* STM32F100xB or STM32F100xE */ - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & RCC_CFGR_SWS; - - switch (tmp) - { - case 0x00U: /* HSI used as system clock */ - SystemCoreClock = HSI_VALUE; - break; - case 0x04U: /* HSE used as system clock */ - SystemCoreClock = HSE_VALUE; - break; - case 0x08U: /* PLL used as system clock */ - - /* Get PLL clock source and multiplication factor ----------------------*/ - pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; - pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; - -#if !defined(STM32F105xC) && !defined(STM32F107xC) - pllmull = ( pllmull >> 18U) + 2U; - - if (pllsource == 0x00U) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1U) * pllmull; - } - else - { - #if defined(STM32F100xB) || defined(STM32F100xE) - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U; - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - #else - /* HSE selected as PLL clock entry */ - if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) - {/* HSE oscillator clock divided by 2 */ - SystemCoreClock = (HSE_VALUE >> 1U) * pllmull; - } - else - { - SystemCoreClock = HSE_VALUE * pllmull; - } - #endif - } -#else - pllmull = pllmull >> 18U; - - if (pllmull != 0x0DU) - { - pllmull += 2U; - } - else - { /* PLL multiplication factor = PLL input clock * 6.5 */ - pllmull = 13U / 2U; - } - - if (pllsource == 0x00U) - { - /* HSI oscillator clock divided by 2 selected as PLL clock entry */ - SystemCoreClock = (HSI_VALUE >> 1U) * pllmull; - } - else - {/* PREDIV1 selected as PLL clock entry */ - - /* Get PREDIV1 clock source and division factor */ - prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC; - prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U; - - if (prediv1source == 0U) - { - /* HSE oscillator clock selected as PREDIV1 clock entry */ - SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; - } - else - {/* PLL2 clock selected as PREDIV1 clock entry */ - - /* Get PREDIV2 division factor and PLL2 multiplication factor */ - prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U; - pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U; - SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; - } - } -#endif /* STM32F105xC */ - break; - - default: - SystemCoreClock = HSI_VALUE; - break; - } - - /* Compute HCLK clock frequency ----------------*/ - /* Get HCLK prescaler */ - tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)]; - /* HCLK clock frequency */ - SystemCoreClock >>= tmp; -} - -#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG) -/** - * @brief Setup the external memory controller. Called in startup_stm32f1xx.s - * before jump to __main - * @param None - * @retval None - */ -#ifdef DATA_IN_ExtSRAM -/** - * @brief Setup the external memory controller. - * Called in startup_stm32f1xx_xx.s/.c before jump to main. - * This function configures the external SRAM mounted on STM3210E-EVAL - * board (STM32 High density devices). This SRAM will be used as program - * data memory (including heap and stack). - * @param None - * @retval None - */ -void SystemInit_ExtMemCtl(void) -{ - __IO uint32_t tmpreg; - /*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is - required, then adjust the Register Addresses */ - - /* Enable FSMC clock */ - RCC->AHBENR = 0x00000114U; - - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN); - - /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ - RCC->APB2ENR = 0x000001E0U; - - /* Delay after an RCC peripheral clock enabling */ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN); - - (void)(tmpreg); - -/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ -/*---------------- SRAM Address lines configuration -------------------------*/ -/*---------------- NOE and NWE configuration --------------------------------*/ -/*---------------- NE3 configuration ----------------------------------------*/ -/*---------------- NBL0, NBL1 configuration ---------------------------------*/ - - GPIOD->CRL = 0x44BB44BBU; - GPIOD->CRH = 0xBBBBBBBBU; - - GPIOE->CRL = 0xB44444BBU; - GPIOE->CRH = 0xBBBBBBBBU; - - GPIOF->CRL = 0x44BBBBBBU; - GPIOF->CRH = 0xBBBB4444U; - - GPIOG->CRL = 0x44BBBBBBU; - GPIOG->CRH = 0x444B4B44U; - -/*---------------- FSMC Configuration ---------------------------------------*/ -/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ - - FSMC_Bank1->BTCR[4U] = 0x00001091U; - FSMC_Bank1->BTCR[5U] = 0x00110212U; -} -#endif /* DATA_IN_ExtSRAM */ -#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f103-mini-system/board/Kconfig b/bsp/stm32/stm32f103-mini-system/board/Kconfig deleted file mode 100644 index fe4bec029d87652d71afe8fbfdf1ebc58f9f4859..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/Kconfig +++ /dev/null @@ -1,81 +0,0 @@ -menu "Hardware Drivers Config" - -config SOC_STM32F103C8 - bool - select SOC_SERIES_STM32F1 - select RT_USING_COMPONENTS_INIT - select RT_USING_USER_MAIN - default y - -menu "Onboard Peripheral Drivers" - - config BSP_USING_USB_TO_USART - bool "Enable USB TO USART (uart1)" - select BSP_USING_UART - select BSP_USING_UART1 - default y - -endmenu - -menu "On-chip Peripheral Drivers" - - config BSP_USING_GPIO - bool "Enable GPIO" - select RT_USING_PIN - default y - - menuconfig BSP_USING_UART - bool "Enable UART" - default y - select RT_USING_SERIAL - if BSP_USING_UART - config BSP_USING_UART1 - bool "Enable UART1" - default y - - config BSP_UART1_RX_USING_DMA - bool "Enable UART1 RX DMA" - depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA - default n - endif - - menuconfig BSP_USING_SPI - bool "Enable SPI BUS" - default n - select RT_USING_SPI - if BSP_USING_SPI - config BSP_USING_SPI1 - bool "Enable SPI1 BUS" - default n - - config BSP_SPI1_TX_USING_DMA - bool "Enable SPI1 TX DMA" - depends on BSP_USING_SPI1 - default n - - config BSP_SPI1_RX_USING_DMA - bool "Enable SPI1 RX DMA" - depends on BSP_USING_SPI1 - select BSP_SPI1_TX_USING_DMA - default n - endif - - menuconfig BSP_USING_ADC - bool "Enable ADC" - default n - select RT_USING_ADC - if BSP_USING_ADC - config BSP_USING_ADC1 - bool "Enable ADC1" - default n - - endif - source "../libraries/HAL_Drivers/Kconfig" - -endmenu - -menu "Board extended module Drivers" - -endmenu - -endmenu diff --git a/bsp/stm32/stm32f103-mini-system/board/SConscript b/bsp/stm32/stm32f103-mini-system/board/SConscript deleted file mode 100644 index 713a0e4b8f14db39161e793e6e04dcec6f56a14f..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/SConscript +++ /dev/null @@ -1,35 +0,0 @@ -import os -import rtconfig -from building import * - -Import('SDK_LIB') - -cwd = GetCurrentDir() - -# add general drivers -src = Split(''' -board.c -CubeMX_Config/Src/stm32f1xx_hal_msp.c -''') - -path = [cwd] -path += [cwd + '/CubeMX_Config/Inc'] - -startup_path_prefix = SDK_LIB - -if rtconfig.CROSS_TOOL == 'gcc': - src += [startup_path_prefix + '/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Source/Templates/gcc/startup_stm32f103xb.s'] -elif rtconfig.CROSS_TOOL == 'keil': - src += [startup_path_prefix + '/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Source/Templates/arm/startup_stm32f103xb.s'] -elif rtconfig.CROSS_TOOL == 'iar': - src += [startup_path_prefix + '/STM32F1xx_HAL/CMSIS/Device/ST/STM32F1xx/Source/Templates/iar/startup_stm32f103xb.s'] - -# STM32F100xB || STM32F100xE || STM32F101x6 -# STM32F101xB || STM32F101xE || STM32F101xG -# STM32F102x6 || STM32F102xB || STM32F103x6 -# STM32F103xB || STM32F103xE || STM32F103xG -# STM32F105xC || STM32F107xC) -# You can select chips from the list above -CPPDEFINES = ['STM32F103xB'] -group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES) -Return('group') diff --git a/bsp/stm32/stm32f103-mini-system/board/board.c b/bsp/stm32/stm32f103-mini-system/board/board.c deleted file mode 100644 index b7ca2b8461f6e2fe035c4823458b224cb3937f7b..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/board.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (c) 2006-2018, RT-Thread Development Team - * - * SPDX-License-Identifier: Apache-2.0 - * - * Change Logs: - * Date Author Notes - * 2019-03-08 obito0 first version - */ - -#include "board.h" - -void SystemClock_Config(void) -{ - RCC_OscInitTypeDef RCC_OscInitStruct = {0}; - RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - - /** Initializes the CPU, AHB and APB busses clocks - */ - RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; - RCC_OscInitStruct.HSEState = RCC_HSE_ON; - RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1; - RCC_OscInitStruct.HSIState = RCC_HSI_ON; - RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; - RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9; - if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) - { - Error_Handler(); - } - /** Initializes the CPU, AHB and APB busses clocks - */ - RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK - |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; - RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; - RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; - RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; - RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; - - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) - { - Error_Handler(); - } -} diff --git a/bsp/stm32/stm32f103-mini-system/board/board.h b/bsp/stm32/stm32f103-mini-system/board/board.h deleted file mode 100644 index 7f0ae67d48b01ee32e50b9541df18e0b5e29a9c5..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright (c) 2006-2018, RT-Thread Development Team - * - * SPDX-License-Identifier: Apache-2.0 - * - * Change Logs: - * Date Author Notes - * 2018-11-5 SummerGift first version - */ - -#ifndef __BOARD_H__ -#define __BOARD_H__ - -#include -#include -#include "drv_common.h" -#include "drv_gpio.h" - -#ifdef __cplusplus -extern "C" { -#endif - -#define STM32_FLASH_START_ADRESS ((uint32_t)0x08000000) -#define STM32_FLASH_SIZE (64 * 1024) -#define STM32_FLASH_END_ADDRESS ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE)) - -/* Internal SRAM memory size[Kbytes] <8-64>, Default: 64*/ -#define STM32_SRAM_SIZE 20 -#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024) - -#if defined(__CC_ARM) || defined(__CLANG_ARM) -extern int Image$$RW_IRAM1$$ZI$$Limit; -#define HEAP_BEGIN ((void *)&Image$$RW_IRAM1$$ZI$$Limit) -#elif __ICCARM__ -#pragma section="CSTACK" -#define HEAP_BEGIN (__segment_end("CSTACK")) -#else -extern int __bss_end; -#define HEAP_BEGIN ((void *)&__bss_end) -#endif - -#define HEAP_END STM32_SRAM_END - -void SystemClock_Config(void); - -#ifdef __cplusplus -} -#endif - -#endif /* __BOARD_H__ */ diff --git a/bsp/stm32/stm32f103-mini-system/board/linker_scripts/link.icf b/bsp/stm32/stm32f103-mini-system/board/linker_scripts/link.icf deleted file mode 100644 index 72eeb0ba65f1783c6a5e56c91fcde5685bb08a8c..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/linker_scripts/link.icf +++ /dev/null @@ -1,28 +0,0 @@ -/*###ICF### Section handled by ICF editor, don't touch! ****/ -/*-Editor annotation file-*/ -/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ -/*-Specials-*/ -define symbol __ICFEDIT_intvec_start__ = 0x08000000; -/*-Memory Regions-*/ -define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; -define symbol __ICFEDIT_region_ROM_end__ = 0x0800FFFF; -define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; -define symbol __ICFEDIT_region_RAM_end__ = 0x20004FFF; -/*-Sizes-*/ -define symbol __ICFEDIT_size_cstack__ = 0x0400; -define symbol __ICFEDIT_size_heap__ = 0x0000; -/**** End of ICF editor section. ###ICF###*/ - -define memory mem with size = 4G; -define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; -define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; - -define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; - -initialize by copy { readwrite }; -do not initialize { section .noinit }; - -place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; - -place in ROM_region { readonly }; -place in RAM_region { readwrite, last block CSTACK}; diff --git a/bsp/stm32/stm32f103-mini-system/board/linker_scripts/link.lds b/bsp/stm32/stm32f103-mini-system/board/linker_scripts/link.lds deleted file mode 100644 index 22e29d2ed7435ed117ea2e42ada2d1c15d687092..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/linker_scripts/link.lds +++ /dev/null @@ -1,156 +0,0 @@ -/* - * linker script for STM32F10x with GNU ld - */ - -/* Program Entry, set to mark it as "used" and avoid gc */ -MEMORY -{ - ROM (rx) : ORIGIN = 0x08000000, LENGTH = 64k /* 64KB flash */ - RAM (rw) : ORIGIN = 0x20000000, LENGTH = 20k /* 20K sram */ -} -ENTRY(Reset_Handler) -_system_stack_size = 0x200; - -SECTIONS -{ - .text : - { - . = ALIGN(4); - _stext = .; - KEEP(*(.isr_vector)) /* Startup code */ - - . = ALIGN(4); - *(.text) /* remaining code */ - *(.text.*) /* remaining code */ - *(.rodata) /* read-only data (constants) */ - *(.rodata*) - *(.glue_7) - *(.glue_7t) - *(.gnu.linkonce.t*) - - /* section information for finsh shell */ - . = ALIGN(4); - __fsymtab_start = .; - KEEP(*(FSymTab)) - __fsymtab_end = .; - - . = ALIGN(4); - __vsymtab_start = .; - KEEP(*(VSymTab)) - __vsymtab_end = .; - - /* section information for initial. */ - . = ALIGN(4); - __rt_init_start = .; - KEEP(*(SORT(.rti_fn*))) - __rt_init_end = .; - - . = ALIGN(4); - - PROVIDE(__ctors_start__ = .); - KEEP (*(SORT(.init_array.*))) - KEEP (*(.init_array)) - PROVIDE(__ctors_end__ = .); - - . = ALIGN(4); - - _etext = .; - } > ROM = 0 - - /* .ARM.exidx is sorted, so has to go in its own output section. */ - __exidx_start = .; - .ARM.exidx : - { - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - - /* This is used by the startup in order to initialize the .data secion */ - _sidata = .; - } > ROM - __exidx_end = .; - - /* .data section which is used for initialized data */ - - .data : AT (_sidata) - { - . = ALIGN(4); - /* This is used by the startup in order to initialize the .data secion */ - _sdata = . ; - - *(.data) - *(.data.*) - *(.gnu.linkonce.d*) - - PROVIDE(__dtors_start__ = .); - KEEP(*(SORT(.dtors.*))) - KEEP(*(.dtors)) - PROVIDE(__dtors_end__ = .); - - . = ALIGN(4); - /* This is used by the startup in order to initialize the .data secion */ - _edata = . ; - } >RAM - - .stack : - { - . = ALIGN(4); - _sstack = .; - . = . + _system_stack_size; - . = ALIGN(4); - _estack = .; - } >RAM - - __bss_start = .; - .bss : - { - . = ALIGN(4); - /* This is used by the startup in order to initialize the .bss secion */ - _sbss = .; - - *(.bss) - *(.bss.*) - *(COMMON) - - . = ALIGN(4); - /* This is used by the startup in order to initialize the .bss secion */ - _ebss = . ; - - *(.bss.init) - } > RAM - __bss_end = .; - - _end = .; - - /* Stabs debugging sections. */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - /* DWARF debug sections. - * Symbols in the DWARF debugging sections are relative to the beginning - * of the section so we begin them at 0. */ - /* DWARF 1 */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2 */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2 */ - .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } -} diff --git a/bsp/stm32/stm32f103-mini-system/board/linker_scripts/link.sct b/bsp/stm32/stm32f103-mini-system/board/linker_scripts/link.sct deleted file mode 100644 index 6930ff4b5084181ef1534768f512c4530daf26d5..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/board/linker_scripts/link.sct +++ /dev/null @@ -1,15 +0,0 @@ -; ************************************************************* -; *** Scatter-Loading Description File generated by uVision *** -; ************************************************************* - -LR_IROM1 0x08000000 0x00010000 { ; load region size_region - ER_IROM1 0x08000000 0x00010000 { ; load address = execution address - *.o (RESET, +First) - *(InRoot$$Sections) - .ANY (+RO) - } - RW_IRAM1 0x20000000 0x00005000 { ; RW data - .ANY (+RW +ZI) - } -} - diff --git a/bsp/stm32/stm32f103-mini-system/figures/board1.jpg b/bsp/stm32/stm32f103-mini-system/figures/board1.jpg deleted file mode 100644 index 47c7221cf739834204556ab85a602b55035b97ea..0000000000000000000000000000000000000000 Binary files a/bsp/stm32/stm32f103-mini-system/figures/board1.jpg and /dev/null differ diff --git a/bsp/stm32/stm32f103-mini-system/figures/board2.jpg b/bsp/stm32/stm32f103-mini-system/figures/board2.jpg deleted file mode 100644 index f14ba5689bf8eb68b5ecb125cc016a2651ed47ad..0000000000000000000000000000000000000000 Binary files a/bsp/stm32/stm32f103-mini-system/figures/board2.jpg and /dev/null differ diff --git a/bsp/stm32/stm32f103-mini-system/figures/board3.jpg b/bsp/stm32/stm32f103-mini-system/figures/board3.jpg deleted file mode 100644 index ac5bb43f7443f470a3808df9bc8a94a921b76d6b..0000000000000000000000000000000000000000 Binary files a/bsp/stm32/stm32f103-mini-system/figures/board3.jpg and /dev/null differ diff --git a/bsp/stm32/stm32f103-mini-system/project.ewd b/bsp/stm32/stm32f103-mini-system/project.ewd deleted file mode 100644 index 5c652a809d0b07d880ac6e1bf16916ec5252b669..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/project.ewd +++ /dev/null @@ -1,2834 +0,0 @@ - - - 3 - - rt-thread - - ARM - - 1 - - C-SPY - 2 - - 29 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ARMSIM_ID - 2 - - 1 - 1 - 1 - - - - - - - - CADI_ID - 2 - - 0 - 1 - 1 - - - - - - - - - CMSISDAP_ID - 2 - - 4 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GDBSERVER_ID - 2 - - 0 - 1 - 1 - - - - - - - - - - - IJET_ID - 2 - - 8 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - JLINK_ID - 2 - - 16 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - LMIFTDI_ID - 2 - - 2 - 1 - 1 - - - - - - - - - - PEMICRO_ID - 2 - - 3 - 1 - 1 - - - - - - - - STLINK_ID - 2 - - 4 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - THIRDPARTY_ID - 2 - - 0 - 1 - 1 - - - - - - - - TIFET_ID - 2 - - 1 - 1 - 1 - - - - - - - - - - - - - - - - - - - XDS100_ID - 2 - - 6 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin - 0 - - - $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin - 1 - - - $EW_DIR$\common\plugins\IARProbe\IarProbePlugin.ENU.ewplugin - 0 - - - $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin - 0 - - - $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin - 0 - - - - - Release - - ARM - - 0 - - C-SPY - 2 - - 29 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ARMSIM_ID - 2 - - 1 - 1 - 0 - - - - - - - - CADI_ID - 2 - - 0 - 1 - 0 - - - - - - - - - CMSISDAP_ID - 2 - - 4 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - GDBSERVER_ID - 2 - - 0 - 1 - 0 - - - - - - - - - - - IJET_ID - 2 - - 8 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - JLINK_ID - 2 - - 16 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - LMIFTDI_ID - 2 - - 2 - 1 - 0 - - - - - - - - - - PEMICRO_ID - 2 - - 3 - 1 - 0 - - - - - - - - STLINK_ID - 2 - - 4 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - THIRDPARTY_ID - 2 - - 0 - 1 - 0 - - - - - - - - TIFET_ID - 2 - - 1 - 1 - 0 - - - - - - - - - - - - - - - - - - - XDS100_ID - 2 - - 6 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin - 0 - - - $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin - 1 - - - $EW_DIR$\common\plugins\IARProbe\IarProbePlugin.ENU.ewplugin - 0 - - - $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin - 0 - - - $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin - 0 - - - - diff --git a/bsp/stm32/stm32f103-mini-system/project.ewp b/bsp/stm32/stm32f103-mini-system/project.ewp deleted file mode 100644 index 2a43f432a0ca354b9630dd94f5aa8fa09c613001..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/project.ewp +++ /dev/null @@ -1,2239 +0,0 @@ - - 3 - - rt-thread - - ARM - - 1 - - General - 3 - - 29 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 34 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 10 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 1 - - - - - - - - - CUSTOM - 3 - - - - 0 - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 20 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 1 - - - - - - - BILINK - 0 - - - - - Release - - ARM - - 0 - - General - 3 - - 29 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 34 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 10 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 0 - - - - - - - - - CUSTOM - 3 - - - - 0 - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 20 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 0 - - - - - - - BILINK - 0 - - - - - Applications - - $PROJ_DIR$\applications\main.c - - - - CPU - - $PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c - - - $PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c - - - $PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c - - - $PROJ_DIR$\..\..\..\libcpu\arm\cortex-m3\cpuport.c - - - $PROJ_DIR$\..\..\..\libcpu\arm\cortex-m3\context_iar.S - - - - DeviceDrivers - - $PROJ_DIR$\..\..\..\components\drivers\misc\pin.c - - - $PROJ_DIR$\..\..\..\components\drivers\serial\serial.c - - - $PROJ_DIR$\..\..\..\components\drivers\src\completion.c - - - $PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c - - - $PROJ_DIR$\..\..\..\components\drivers\src\pipe.c - - - $PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c - - - $PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c - - - $PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c - - - $PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c - - - - Drivers - - $PROJ_DIR$\board\board.c - - - $PROJ_DIR$\board\CubeMX_Config\Src\stm32f1xx_hal_msp.c - - - $PROJ_DIR$\..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\iar\startup_stm32f103xb.s - - - $PROJ_DIR$\..\libraries\HAL_Drivers\drv_gpio.c - - - $PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c - - - $PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c - - - - finsh - - $PROJ_DIR$\..\..\..\components\finsh\shell.c - - - $PROJ_DIR$\..\..\..\components\finsh\cmd.c - - - $PROJ_DIR$\..\..\..\components\finsh\msh.c - - - - Kernel - - $PROJ_DIR$\..\..\..\src\clock.c - - - $PROJ_DIR$\..\..\..\src\components.c - - - $PROJ_DIR$\..\..\..\src\device.c - - - $PROJ_DIR$\..\..\..\src\idle.c - - - $PROJ_DIR$\..\..\..\src\ipc.c - - - $PROJ_DIR$\..\..\..\src\irq.c - - - $PROJ_DIR$\..\..\..\src\kservice.c - - - $PROJ_DIR$\..\..\..\src\mem.c - - - $PROJ_DIR$\..\..\..\src\mempool.c - - - $PROJ_DIR$\..\..\..\src\object.c - - - $PROJ_DIR$\..\..\..\src\scheduler.c - - - $PROJ_DIR$\..\..\..\src\signal.c - - - $PROJ_DIR$\..\..\..\src\thread.c - - - $PROJ_DIR$\..\..\..\src\timer.c - - - - Libraries - - $PROJ_DIR$\..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c - - - $PROJ_DIR$\..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_dma.c - - - $PROJ_DIR$\..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cortex.c - - - $PROJ_DIR$\..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_crc.c - - - $PROJ_DIR$\..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_pwr.c - - - $PROJ_DIR$\..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc.c - - - $PROJ_DIR$\..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc_ex.c - - - $PROJ_DIR$\..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.c - - - $PROJ_DIR$\..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cec.c - - - $PROJ_DIR$\..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio.c - - - $PROJ_DIR$\..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio_ex.c - - - $PROJ_DIR$\..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_uart.c - - - $PROJ_DIR$\..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_usart.c - - - diff --git a/bsp/stm32/stm32f103-mini-system/project.eww b/bsp/stm32/stm32f103-mini-system/project.eww deleted file mode 100644 index c2cb02eb1e89d73e24183274c1c886ddf74f9537..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/project.eww +++ /dev/null @@ -1,10 +0,0 @@ - - - - - $WS_DIR$\project.ewp - - - - - diff --git a/bsp/stm32/stm32f103-mini-system/project.uvopt b/bsp/stm32/stm32f103-mini-system/project.uvopt deleted file mode 100644 index 7946319ef93db8bc541b3471e1621191e6ad0d99..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/project.uvopt +++ /dev/null @@ -1,162 +0,0 @@ - - - - 1.0 - -
### uVision Project, (C) Keil Software
- - - *.c - *.s*; *.src; *.a* - *.obj - *.lib - *.txt; *.h; *.inc - *.plm - *.cpp - - - - 0 - 0 - - - - rt-thread - 0x4 - ARM-ADS - - 8000000 - - 1 - 1 - 1 - 0 - - - 1 - 65535 - 0 - 0 - 0 - - - 79 - 66 - 8 - .\build\keil\List\ - - - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 0 - 0 - 0 - 0 - - - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - - - 0 - 0 - 1 - - 0 - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 0 - 1 - 1 - 0 - 0 - 0 - 6 - - - - - - - - - - - Segger\JL2CM3.dll - - - - 0 - JL2CM3 - -U30000299 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 - - - 0 - UL2CM3 - UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000) - - - - - 0 - - - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - - - - - diff --git a/bsp/stm32/stm32f103-mini-system/project.uvoptx b/bsp/stm32/stm32f103-mini-system/project.uvoptx deleted file mode 100644 index 2a5ee7712d832819d0453fc5e3beff80f0878785..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/project.uvoptx +++ /dev/null @@ -1,199 +0,0 @@ - - - - 1.0 - -
### uVision Project, (C) Keil Software
- - - *.c - *.s*; *.src; *.a* - *.obj; *.o - *.lib - *.txt; *.h; *.inc - *.plm - *.cpp - 0 - - - - 0 - 0 - - - - rt-thread - 0x4 - ARM-ADS - - 12000000 - - 1 - 1 - 0 - 1 - 0 - - - 1 - 65535 - 0 - 0 - 0 - - - 79 - 66 - 8 - .\build\keil\List\ - - - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 0 - 0 - 0 - 0 - - - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - - - 1 - 0 - 1 - - 18 - - - 0 - Base Board Schematics (MCBSTM32E) - I:\MDK5\MDK5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Documents\mcbstm32e-base-board-schematics.pdf - - - 1 - Display Board Schematics (MCBSTM32E) - I:\MDK5\MDK5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Documents\mcbstm32e-display-board-schematics.pdf - - - 2 - User Manual (MCBSTM32E) - I:\MDK5\MDK5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Documents\mcbstm32e.chm - - - 3 - MCBSTM32E Evaluation Board Web Page (MCBSTM32E) - http://www.keil.com/mcbstm32e/ - - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 1 - 1 - 1 - 0 - 0 - 1 - - - - - - - - - - - BIN\UL2CM3.DLL - - - - 0 - JL2CM3 - -U30000299 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN0 - - - 0 - UL2CM3 - UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32F10x_128 -FL020000 -FS08000000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM) - - - - - 0 - - - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - - - 1 - 0 - 2 - 10000000 - - - - - - Source Group 1 - 0 - 0 - 0 - 0 - - - diff --git a/bsp/stm32/stm32f103-mini-system/project.uvproj b/bsp/stm32/stm32f103-mini-system/project.uvproj deleted file mode 100644 index 8e7d7538d51c700ad9e176b01376b79d3c42c018..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/project.uvproj +++ /dev/null @@ -1,783 +0,0 @@ - - - 1.1 -
### uVision Project, (C) Keil Software
- - - rt-thread - 0x4 - ARM-ADS - - - STM32F103RB - STMicroelectronics - IRAM(0x20000000-0x20004FFF) IROM(0x8000000-0x801FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3") - - "STARTUP\ST\STM32F10x\startup_stm32f10x_md.s" ("STM32 Medium Density Line Startup Code") - UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000) - 4231 - stm32f10x.h - - - - - - - - - - SFD\ST\STM32F1xx\STM32F103xx.sfr - 0 - 0 - - - - ST\STM32F10x\ - ST\STM32F10x\ - - 0 - 0 - 0 - 0 - 1 - - .\build\keil\Obj\ - rt-thread - 1 - 0 - 0 - 1 - 0 - .\build\keil\List\ - 1 - 0 - 0 - - 0 - 0 - - - 0 - 0 - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - - 1 - 0 - fromelf --bin !L --output rtthread.bin - - 0 - 0 - - 0 - - - - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 3 - - - 1 - - - SARMCM3.DLL - - DARMSTM.DLL - -pSTM32F103RB - SARMCM3.DLL - - TARMSTM.DLL - -pSTM32F103RB - - - - 1 - 0 - 0 - 0 - 16 - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - - - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 0 - 1 - 0 - - 0 - 6 - - - - - - - - - - - - - - Segger\JL2CM3.dll - - - - - 1 - 0 - 0 - 1 - 1 - 4096 - - 1 - BIN\UL2CM3.DLL - - - - - - 0 - - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 1 - 0 - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - "Cortex-M3" - - 0 - 0 - 0 - 1 - 1 - 0 - 0 - 0 - 0 - 0 - 8 - 0 - 0 - 0 - 3 - 3 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 1 - 0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x5000 - - - 1 - 0x8000000 - 0x20000 - - - 0 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x8000000 - 0x20000 - - - 1 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x5000 - - - 0 - 0x0 - 0x0 - - - - - - 1 - 1 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 1 - 0 - - - STM32F103xB, USE_HAL_DRIVER, __RTTHREAD__ - - applications;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m3;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Include;..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Inc;..\libraries\STM32F1xx_HAL\CMSIS\Include - - - - 1 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - - - - - - - 0 - 0 - 0 - 0 - 1 - 0 - 0x08000000 - 0x20000000 - - .\board\linker_scripts\link.sct - - - - - - - - - - - Applications - - - main.c - 1 - applications\main.c - - - - - CPU - - - backtrace.c - 1 - ..\..\..\libcpu\arm\common\backtrace.c - - - - - div0.c - 1 - ..\..\..\libcpu\arm\common\div0.c - - - - - showmem.c - 1 - ..\..\..\libcpu\arm\common\showmem.c - - - - - cpuport.c - 1 - ..\..\..\libcpu\arm\cortex-m3\cpuport.c - - - - - context_rvds.S - 2 - ..\..\..\libcpu\arm\cortex-m3\context_rvds.S - - - - - DeviceDrivers - - - pin.c - 1 - ..\..\..\components\drivers\misc\pin.c - - - - - serial.c - 1 - ..\..\..\components\drivers\serial\serial.c - - - - - completion.c - 1 - ..\..\..\components\drivers\src\completion.c - - - - - dataqueue.c - 1 - ..\..\..\components\drivers\src\dataqueue.c - - - - - pipe.c - 1 - ..\..\..\components\drivers\src\pipe.c - - - - - ringblk_buf.c - 1 - ..\..\..\components\drivers\src\ringblk_buf.c - - - - - ringbuffer.c - 1 - ..\..\..\components\drivers\src\ringbuffer.c - - - - - waitqueue.c - 1 - ..\..\..\components\drivers\src\waitqueue.c - - - - - workqueue.c - 1 - ..\..\..\components\drivers\src\workqueue.c - - - - - Drivers - - - board.c - 1 - board\board.c - - - - - stm32f1xx_hal_msp.c - 1 - board\CubeMX_Config\Src\stm32f1xx_hal_msp.c - - - - - startup_stm32f103xb.s - 2 - ..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s - - - - - drv_gpio.c - 1 - ..\libraries\HAL_Drivers\drv_gpio.c - - - - - drv_usart.c - 1 - ..\libraries\HAL_Drivers\drv_usart.c - - - - - drv_common.c - 1 - ..\libraries\HAL_Drivers\drv_common.c - - - - - finsh - - - shell.c - 1 - ..\..\..\components\finsh\shell.c - - - - - cmd.c - 1 - ..\..\..\components\finsh\cmd.c - - - - - msh.c - 1 - ..\..\..\components\finsh\msh.c - - - - - Kernel - - - clock.c - 1 - ..\..\..\src\clock.c - - - - - components.c - 1 - ..\..\..\src\components.c - - - - - device.c - 1 - ..\..\..\src\device.c - - - - - idle.c - 1 - ..\..\..\src\idle.c - - - - - ipc.c - 1 - ..\..\..\src\ipc.c - - - - - irq.c - 1 - ..\..\..\src\irq.c - - - - - kservice.c - 1 - ..\..\..\src\kservice.c - - - - - mem.c - 1 - ..\..\..\src\mem.c - - - - - mempool.c - 1 - ..\..\..\src\mempool.c - - - - - object.c - 1 - ..\..\..\src\object.c - - - - - scheduler.c - 1 - ..\..\..\src\scheduler.c - - - - - signal.c - 1 - ..\..\..\src\signal.c - - - - - thread.c - 1 - ..\..\..\src\thread.c - - - - - timer.c - 1 - ..\..\..\src\timer.c - - - - - Libraries - - - system_stm32f1xx.c - 1 - ..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c - - - - - stm32f1xx_hal_dma.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_dma.c - - - - - stm32f1xx_hal_cortex.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cortex.c - - - - - stm32f1xx_hal_crc.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_crc.c - - - - - stm32f1xx_hal_pwr.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_pwr.c - - - - - stm32f1xx_hal_rcc.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc.c - - - - - stm32f1xx_hal_rcc_ex.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc_ex.c - - - - - stm32f1xx_hal.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.c - - - - - stm32f1xx_hal_cec.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cec.c - - - - - stm32f1xx_hal_gpio.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio.c - - - - - stm32f1xx_hal_gpio_ex.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio_ex.c - - - - - stm32f1xx_hal_uart.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_uart.c - - - - - stm32f1xx_hal_usart.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_usart.c - - - - - - - diff --git a/bsp/stm32/stm32f103-mini-system/project.uvprojx b/bsp/stm32/stm32f103-mini-system/project.uvprojx deleted file mode 100644 index f719cebbfa6422988f4f3031710c99eda9c73f88..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/project.uvprojx +++ /dev/null @@ -1,786 +0,0 @@ - - - 2.1 -
### uVision Project, (C) Keil Software
- - - rt-thread - 0x4 - ARM-ADS - - - STM32F103C8 - STMicroelectronics - Keil.STM32F1xx_DFP.1.0.5 - http://www.keil.com/pack/ - IROM(0x08000000,0x10000) IRAM(0x20000000,0x5000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE - - - UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM)) - 0 - $$Device:STM32F103C8$Device\Include\stm32f10x.h - - - - - - - - - - $$Device:STM32F103C8$SVD\STM32F103xx.svd - 0 - 0 - - - - - - - 0 - 0 - 0 - 0 - 1 - - .\build\keil\Obj\ - rt-thread - 1 - 0 - 1 - 1 - 0 - .\build\keil\List\ - 1 - 0 - 0 - - 0 - 0 - - - 0 - 0 - 0 - 0 - - - 0 - 0 - - - 0 - 0 - 0 - 0 - - - 1 - 0 - fromelf --bin !L --output rtthread.bin - - 0 - 0 - - 0 - - - - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 3 - - - 1 - - - SARMCM3.DLL - -REMAP - DCM.DLL - -pCM3 - SARMCM3.DLL - - TCM.DLL - -pCM3 - - - - 1 - 0 - 0 - 0 - 16 - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - - - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 1 - 1 - - 0 - 1 - - - - - - - - - - - - - - BIN\UL2CM3.DLL - - - - - 1 - 0 - 0 - 1 - 1 - 4096 - - 1 - BIN\UL2CM3.DLL - - - - - - 0 - - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 1 - 0 - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - "Cortex-M3" - - 0 - 0 - 0 - 1 - 1 - 0 - 0 - 0 - 0 - 0 - 8 - 0 - 0 - 0 - 3 - 3 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 1 - 0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x5000 - - - 1 - 0x8000000 - 0x10000 - - - 0 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x8000000 - 0x10000 - - - 1 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x5000 - - - 0 - 0x0 - 0x0 - - - - - - 1 - 1 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 0 - 2 - 0 - 0 - 1 - 0 - - - STM32F103xB, USE_HAL_DRIVER, __RTTHREAD__ - - applications;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m3;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\components\finsh;.;..\..\..\include;..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Include;..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Inc;..\libraries\STM32F1xx_HAL\CMSIS\Include - - - - 1 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - - - - - - - 0 - 0 - 0 - 0 - 1 - 0 - 0x08000000 - 0x20000000 - - .\board\linker_scripts\link.sct - - - - - - - - - - - Applications - - - main.c - 1 - applications\main.c - - - - - CPU - - - backtrace.c - 1 - ..\..\..\libcpu\arm\common\backtrace.c - - - - - div0.c - 1 - ..\..\..\libcpu\arm\common\div0.c - - - - - showmem.c - 1 - ..\..\..\libcpu\arm\common\showmem.c - - - - - cpuport.c - 1 - ..\..\..\libcpu\arm\cortex-m3\cpuport.c - - - - - context_rvds.S - 2 - ..\..\..\libcpu\arm\cortex-m3\context_rvds.S - - - - - DeviceDrivers - - - pin.c - 1 - ..\..\..\components\drivers\misc\pin.c - - - - - serial.c - 1 - ..\..\..\components\drivers\serial\serial.c - - - - - completion.c - 1 - ..\..\..\components\drivers\src\completion.c - - - - - dataqueue.c - 1 - ..\..\..\components\drivers\src\dataqueue.c - - - - - pipe.c - 1 - ..\..\..\components\drivers\src\pipe.c - - - - - ringblk_buf.c - 1 - ..\..\..\components\drivers\src\ringblk_buf.c - - - - - ringbuffer.c - 1 - ..\..\..\components\drivers\src\ringbuffer.c - - - - - waitqueue.c - 1 - ..\..\..\components\drivers\src\waitqueue.c - - - - - workqueue.c - 1 - ..\..\..\components\drivers\src\workqueue.c - - - - - Drivers - - - board.c - 1 - board\board.c - - - - - stm32f1xx_hal_msp.c - 1 - board\CubeMX_Config\Src\stm32f1xx_hal_msp.c - - - - - startup_stm32f103xb.s - 2 - ..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\arm\startup_stm32f103xb.s - - - - - drv_gpio.c - 1 - ..\libraries\HAL_Drivers\drv_gpio.c - - - - - drv_usart.c - 1 - ..\libraries\HAL_Drivers\drv_usart.c - - - - - drv_common.c - 1 - ..\libraries\HAL_Drivers\drv_common.c - - - - - finsh - - - shell.c - 1 - ..\..\..\components\finsh\shell.c - - - - - cmd.c - 1 - ..\..\..\components\finsh\cmd.c - - - - - msh.c - 1 - ..\..\..\components\finsh\msh.c - - - - - Kernel - - - clock.c - 1 - ..\..\..\src\clock.c - - - - - components.c - 1 - ..\..\..\src\components.c - - - - - device.c - 1 - ..\..\..\src\device.c - - - - - idle.c - 1 - ..\..\..\src\idle.c - - - - - ipc.c - 1 - ..\..\..\src\ipc.c - - - - - irq.c - 1 - ..\..\..\src\irq.c - - - - - kservice.c - 1 - ..\..\..\src\kservice.c - - - - - mem.c - 1 - ..\..\..\src\mem.c - - - - - mempool.c - 1 - ..\..\..\src\mempool.c - - - - - object.c - 1 - ..\..\..\src\object.c - - - - - scheduler.c - 1 - ..\..\..\src\scheduler.c - - - - - signal.c - 1 - ..\..\..\src\signal.c - - - - - thread.c - 1 - ..\..\..\src\thread.c - - - - - timer.c - 1 - ..\..\..\src\timer.c - - - - - Libraries - - - system_stm32f1xx.c - 1 - ..\libraries\STM32F1xx_HAL\CMSIS\Device\ST\STM32F1xx\Source\Templates\system_stm32f1xx.c - - - - - stm32f1xx_hal_dma.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_dma.c - - - - - stm32f1xx_hal_cortex.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cortex.c - - - - - stm32f1xx_hal_crc.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_crc.c - - - - - stm32f1xx_hal_pwr.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_pwr.c - - - - - stm32f1xx_hal_rcc.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc.c - - - - - stm32f1xx_hal_rcc_ex.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_rcc_ex.c - - - - - stm32f1xx_hal.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal.c - - - - - stm32f1xx_hal_cec.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_cec.c - - - - - stm32f1xx_hal_gpio.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio.c - - - - - stm32f1xx_hal_gpio_ex.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_gpio_ex.c - - - - - stm32f1xx_hal_uart.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_uart.c - - - - - stm32f1xx_hal_usart.c - 1 - ..\libraries\STM32F1xx_HAL\STM32F1xx_HAL_Driver\Src\stm32f1xx_hal_usart.c - - - - - - - diff --git a/bsp/stm32/stm32f103-mini-system/rtconfig.h b/bsp/stm32/stm32f103-mini-system/rtconfig.h deleted file mode 100644 index ad9281a5d45812d72d62eb12771ad832f8ca6370..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/rtconfig.h +++ /dev/null @@ -1,178 +0,0 @@ -#ifndef RT_CONFIG_H__ -#define RT_CONFIG_H__ - -/* Automatically generated file; DO NOT EDIT. */ -/* RT-Thread Configuration */ - -/* RT-Thread Kernel */ - -#define RT_NAME_MAX 8 -#define RT_ALIGN_SIZE 4 -#define RT_THREAD_PRIORITY_32 -#define RT_THREAD_PRIORITY_MAX 32 -#define RT_TICK_PER_SECOND 1000 -#define RT_USING_OVERFLOW_CHECK -#define RT_USING_HOOK -#define RT_USING_IDLE_HOOK -#define RT_IDLE_HOOK_LIST_SIZE 4 -#define IDLE_THREAD_STACK_SIZE 256 -#define RT_DEBUG - -/* Inter-Thread communication */ - -#define RT_USING_SEMAPHORE -#define RT_USING_MUTEX -#define RT_USING_EVENT -#define RT_USING_MAILBOX -#define RT_USING_MESSAGEQUEUE - -/* Memory Management */ - -#define RT_USING_MEMPOOL -#define RT_USING_SMALL_MEM -#define RT_USING_HEAP - -/* Kernel Device Object */ - -#define RT_USING_DEVICE -#define RT_USING_CONSOLE -#define RT_CONSOLEBUF_SIZE 128 -#define RT_CONSOLE_DEVICE_NAME "uart1" -#define RT_VER_NUM 0x40001 -#define ARCH_ARM -#define ARCH_ARM_CORTEX_M -#define ARCH_ARM_CORTEX_M3 - -/* RT-Thread Components */ - -#define RT_USING_COMPONENTS_INIT -#define RT_USING_USER_MAIN -#define RT_MAIN_THREAD_STACK_SIZE 2048 -#define RT_MAIN_THREAD_PRIORITY 10 - -/* C++ features */ - - -/* Command shell */ - -#define RT_USING_FINSH -#define FINSH_THREAD_NAME "tshell" -#define FINSH_USING_HISTORY -#define FINSH_HISTORY_LINES 5 -#define FINSH_USING_SYMTAB -#define FINSH_USING_DESCRIPTION -#define FINSH_THREAD_PRIORITY 20 -#define FINSH_THREAD_STACK_SIZE 4096 -#define FINSH_CMD_SIZE 80 -#define FINSH_USING_MSH -#define FINSH_USING_MSH_DEFAULT -#define FINSH_USING_MSH_ONLY -#define FINSH_ARG_MAX 10 - -/* Device virtual file system */ - - -/* Device Drivers */ - -#define RT_USING_DEVICE_IPC -#define RT_PIPE_BUFSZ 512 -#define RT_USING_SERIAL -#define RT_SERIAL_USING_DMA -#define RT_SERIAL_RB_BUFSZ 64 -#define RT_USING_PIN - -/* Using WiFi */ - - -/* Using USB */ - - -/* POSIX layer and C standard library */ - - -/* Network */ - -/* Socket abstraction layer */ - - -/* light weight TCP/IP stack */ - - -/* Modbus master and slave stack */ - - -/* AT commands */ - - -/* VBUS(Virtual Software BUS) */ - - -/* Utilities */ - - -/* RT-Thread online packages */ - -/* IoT - internet of things */ - - -/* Wi-Fi */ - -/* Marvell WiFi */ - - -/* Wiced WiFi */ - - -/* IoT Cloud */ - - -/* security packages */ - - -/* language packages */ - - -/* multimedia packages */ - - -/* tools packages */ - - -/* system packages */ - - -/* peripheral libraries and drivers */ - - -/* miscellaneous packages */ - - -/* sample package */ - -/* samples: kernel and components samples */ - - -/* example package: hello */ - -#define SOC_FAMILY_STM32 -#define SOC_SERIES_STM32F1 - -/* Hardware Drivers Config */ - -#define SOC_STM32F103C8 - -/* Onboard Peripheral Drivers */ - -#define BSP_USING_USB_TO_USART - -/* On-chip Peripheral Drivers */ - -#define BSP_USING_GPIO -#define BSP_USING_UART -#define BSP_USING_UART1 -#define BSP_UART1_RX_USING_DMA - -/* Board extended module Drivers */ - - -#endif diff --git a/bsp/stm32/stm32f103-mini-system/rtconfig.py b/bsp/stm32/stm32f103-mini-system/rtconfig.py deleted file mode 100644 index b363b752f5bf47fbbc4cfdf946cc580cd4d5d666..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/rtconfig.py +++ /dev/null @@ -1,151 +0,0 @@ -import os - -# toolchains options -ARCH='arm' -CPU='cortex-m3' -CROSS_TOOL='gcc' - -# bsp lib config -BSP_LIBRARY_TYPE = None - -if os.getenv('RTT_CC'): - CROSS_TOOL = os.getenv('RTT_CC') -if os.getenv('RTT_ROOT'): - RTT_ROOT = os.getenv('RTT_ROOT') - -# cross_tool provides the cross compiler -# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR -if CROSS_TOOL == 'gcc': - PLATFORM = 'gcc' - EXEC_PATH = r'C:\Users\XXYYZZ' -elif CROSS_TOOL == 'keil': - PLATFORM = 'armcc' - EXEC_PATH = r'C:/Keil_v5' -elif CROSS_TOOL == 'iar': - PLATFORM = 'iar' - EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.0' - -if os.getenv('RTT_EXEC_PATH'): - EXEC_PATH = os.getenv('RTT_EXEC_PATH') - -BUILD = 'debug' - -if PLATFORM == 'gcc': - # toolchains - PREFIX = 'arm-none-eabi-' - CC = PREFIX + 'gcc' - AS = PREFIX + 'gcc' - AR = PREFIX + 'ar' - CXX = PREFIX + 'g++' - LINK = PREFIX + 'gcc' - TARGET_EXT = 'elf' - SIZE = PREFIX + 'size' - OBJDUMP = PREFIX + 'objdump' - OBJCPY = PREFIX + 'objcopy' - - DEVICE = ' -mcpu=cortex-m3 -mthumb -ffunction-sections -fdata-sections' - CFLAGS = DEVICE + ' -Dgcc' - AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb ' - LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds' - - CPATH = '' - LPATH = '' - - if BUILD == 'debug': - CFLAGS += ' -O0 -gdwarf-2 -g' - AFLAGS += ' -gdwarf-2' - else: - CFLAGS += ' -O2' - - CXXFLAGS = CFLAGS - - POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n' - -elif PLATFORM == 'armcc': - # toolchains - CC = 'armcc' - CXX = 'armcc' - AS = 'armasm' - AR = 'armar' - LINK = 'armlink' - TARGET_EXT = 'axf' - - DEVICE = ' --cpu Cortex-M3 ' - CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99' - AFLAGS = DEVICE + ' --apcs=interwork ' - LFLAGS = DEVICE + ' --scatter "board\linker_scripts\link.sct" --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict' - CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include' - LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib' - - CFLAGS += ' -D__MICROLIB ' - AFLAGS += ' --pd "__MICROLIB SETA 1" ' - LFLAGS += ' --library_type=microlib ' - EXEC_PATH += '/ARM/ARMCC/bin/' - - if BUILD == 'debug': - CFLAGS += ' -g -O0' - AFLAGS += ' -g' - else: - CFLAGS += ' -O2' - - - CXXFLAGS = CFLAGS - CFLAGS += ' -std=c99' - - POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' - -elif PLATFORM == 'iar': - # toolchains - CC = 'iccarm' - CXX = 'iccarm' - AS = 'iasmarm' - AR = 'iarchive' - LINK = 'ilinkarm' - TARGET_EXT = 'out' - - DEVICE = '-Dewarm' - - CFLAGS = DEVICE - CFLAGS += ' --diag_suppress Pa050' - CFLAGS += ' --no_cse' - CFLAGS += ' --no_unroll' - CFLAGS += ' --no_inline' - CFLAGS += ' --no_code_motion' - CFLAGS += ' --no_tbaa' - CFLAGS += ' --no_clustering' - CFLAGS += ' --no_scheduling' - CFLAGS += ' --endian=little' - CFLAGS += ' --cpu=Cortex-M3' - CFLAGS += ' -e' - CFLAGS += ' --fpu=None' - CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"' - CFLAGS += ' --silent' - - AFLAGS = DEVICE - AFLAGS += ' -s+' - AFLAGS += ' -w+' - AFLAGS += ' -r' - AFLAGS += ' --cpu Cortex-M3' - AFLAGS += ' --fpu None' - AFLAGS += ' -S' - - if BUILD == 'debug': - CFLAGS += ' --debug' - CFLAGS += ' -On' - else: - CFLAGS += ' -Oh' - - LFLAGS = ' --config "board/linker_scripts/link.icf"' - LFLAGS += ' --entry __iar_program_start' - - CXXFLAGS = CFLAGS - - EXEC_PATH = EXEC_PATH + '/arm/bin/' - POST_ACTION = 'ielftool --bin $TARGET rtthread.bin' - -def dist_handle(BSP_ROOT, dist_dir): - import sys - cwd_path = os.getcwd() - sys.path.append(os.path.join(os.path.dirname(BSP_ROOT), 'tools')) - from sdk_dist import dist_do_building - dist_do_building(BSP_ROOT, dist_dir) diff --git a/bsp/stm32/stm32f103-mini-system/template.ewp b/bsp/stm32/stm32f103-mini-system/template.ewp deleted file mode 100644 index 3280a547c0cf88bcd44c886a49171a1a62753c1a..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/template.ewp +++ /dev/null @@ -1,2032 +0,0 @@ - - - 3 - - rt-thread - - ARM - - 1 - - General - 3 - - 29 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 34 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 10 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 1 - - - - - - - - - CUSTOM - 3 - - - - 0 - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 20 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 1 - - - - - - - BILINK - 0 - - - - - Release - - ARM - - 0 - - General - 3 - - 29 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 34 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 10 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 0 - - - - - - - - - CUSTOM - 3 - - - - 0 - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 20 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 0 - - - - - - - BILINK - 0 - - - - diff --git a/bsp/stm32/stm32f103-mini-system/template.eww b/bsp/stm32/stm32f103-mini-system/template.eww deleted file mode 100644 index bd036bb4c98c1598f04b85f64b0dff37f6ec6028..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/template.eww +++ /dev/null @@ -1,10 +0,0 @@ - - - - - $WS_DIR$\template.ewp - - - - - diff --git a/bsp/stm32/stm32f103-mini-system/template.uvopt b/bsp/stm32/stm32f103-mini-system/template.uvopt deleted file mode 100644 index 7946319ef93db8bc541b3471e1621191e6ad0d99..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/template.uvopt +++ /dev/null @@ -1,162 +0,0 @@ - - - - 1.0 - -
### uVision Project, (C) Keil Software
- - - *.c - *.s*; *.src; *.a* - *.obj - *.lib - *.txt; *.h; *.inc - *.plm - *.cpp - - - - 0 - 0 - - - - rt-thread - 0x4 - ARM-ADS - - 8000000 - - 1 - 1 - 1 - 0 - - - 1 - 65535 - 0 - 0 - 0 - - - 79 - 66 - 8 - .\build\keil\List\ - - - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 0 - 0 - 0 - 0 - - - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - - - 0 - 0 - 1 - - 0 - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 0 - 1 - 1 - 0 - 0 - 0 - 6 - - - - - - - - - - - Segger\JL2CM3.dll - - - - 0 - JL2CM3 - -U30000299 -O78 -S0 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 - - - 0 - UL2CM3 - UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000) - - - - - 0 - - - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - - - - - diff --git a/bsp/stm32/stm32f103-mini-system/template.uvoptx b/bsp/stm32/stm32f103-mini-system/template.uvoptx deleted file mode 100644 index 2a5ee7712d832819d0453fc5e3beff80f0878785..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/template.uvoptx +++ /dev/null @@ -1,199 +0,0 @@ - - - - 1.0 - -
### uVision Project, (C) Keil Software
- - - *.c - *.s*; *.src; *.a* - *.obj; *.o - *.lib - *.txt; *.h; *.inc - *.plm - *.cpp - 0 - - - - 0 - 0 - - - - rt-thread - 0x4 - ARM-ADS - - 12000000 - - 1 - 1 - 0 - 1 - 0 - - - 1 - 65535 - 0 - 0 - 0 - - - 79 - 66 - 8 - .\build\keil\List\ - - - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 0 - 0 - 0 - 0 - - - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - - - 1 - 0 - 1 - - 18 - - - 0 - Base Board Schematics (MCBSTM32E) - I:\MDK5\MDK5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Documents\mcbstm32e-base-board-schematics.pdf - - - 1 - Display Board Schematics (MCBSTM32E) - I:\MDK5\MDK5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Documents\mcbstm32e-display-board-schematics.pdf - - - 2 - User Manual (MCBSTM32E) - I:\MDK5\MDK5\ARM\PACK\Keil\STM32F1xx_DFP\1.0.5\Documents\mcbstm32e.chm - - - 3 - MCBSTM32E Evaluation Board Web Page (MCBSTM32E) - http://www.keil.com/mcbstm32e/ - - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 1 - 1 - 1 - 0 - 0 - 1 - - - - - - - - - - - BIN\UL2CM3.DLL - - - - 0 - JL2CM3 - -U30000299 -O78 -S2 -ZTIFSpeedSel5000 -A0 -C0 -JU1 -JI127.0.0.1 -JP0 -RST0 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(4) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -TB1 -TFE0 -FO15 -FD20000000 -FC1000 -FN0 - - - 0 - UL2CM3 - UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32F10x_128 -FL020000 -FS08000000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM) - - - - - 0 - - - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - - - 1 - 0 - 2 - 10000000 - - - - - - Source Group 1 - 0 - 0 - 0 - 0 - - - diff --git a/bsp/stm32/stm32f103-mini-system/template.uvproj b/bsp/stm32/stm32f103-mini-system/template.uvproj deleted file mode 100644 index 99e58d3b303a5221b7e8504becedced2540f8100..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/template.uvproj +++ /dev/null @@ -1,407 +0,0 @@ - - - - 1.1 - -
### uVision Project, (C) Keil Software
- - - - rt-thread - 0x4 - ARM-ADS - - - STM32F103RB - STMicroelectronics - IRAM(0x20000000-0x20004FFF) IROM(0x8000000-0x801FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3") - - "STARTUP\ST\STM32F10x\startup_stm32f10x_md.s" ("STM32 Medium Density Line Startup Code") - UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000) - 4231 - stm32f10x.h - - - - - - - - - - SFD\ST\STM32F1xx\STM32F103xx.sfr - 0 - 0 - - - - ST\STM32F10x\ - ST\STM32F10x\ - - 0 - 0 - 0 - 0 - 1 - - .\build\keil\Obj\ - rt-thread - 1 - 0 - 0 - 1 - 0 - .\build\keil\List\ - 1 - 0 - 0 - - 0 - 0 - - - 0 - 0 - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - - 1 - 0 - fromelf --bin !L --output rtthread.bin - - 0 - 0 - - 0 - - - - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 3 - - - 1 - - - SARMCM3.DLL - - DARMSTM.DLL - -pSTM32F103RB - SARMCM3.DLL - - TARMSTM.DLL - -pSTM32F103RB - - - - 1 - 0 - 0 - 0 - 16 - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - - - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 0 - 1 - 0 - - 0 - 6 - - - - - - - - - - - - - - Segger\JL2CM3.dll - - - - - 1 - 0 - 0 - 1 - 1 - 4096 - - 1 - BIN\UL2CM3.DLL - - - - - - 0 - - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 1 - 0 - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - "Cortex-M3" - - 0 - 0 - 0 - 1 - 1 - 0 - 0 - 0 - 0 - 0 - 8 - 0 - 0 - 0 - 3 - 3 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 1 - 0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x5000 - - - 1 - 0x8000000 - 0x20000 - - - 0 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x8000000 - 0x20000 - - - 1 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x5000 - - - 0 - 0x0 - 0x0 - - - - - - 1 - 1 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 1 - 0 - - - - - - - - - 1 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - - - - - - - 0 - 0 - 0 - 0 - 1 - 0 - 0x08000000 - 0x20000000 - - .\board\linker_scripts\link.sct - - - - - - - - - - - - diff --git a/bsp/stm32/stm32f103-mini-system/template.uvprojx b/bsp/stm32/stm32f103-mini-system/template.uvprojx deleted file mode 100644 index 3f668488e926e35e703d99cc5214e756e54dccd7..0000000000000000000000000000000000000000 --- a/bsp/stm32/stm32f103-mini-system/template.uvprojx +++ /dev/null @@ -1,415 +0,0 @@ - - - - 2.1 - -
### uVision Project, (C) Keil Software
- - - - rt-thread - 0x4 - ARM-ADS - - - STM32F103C8 - STMicroelectronics - Keil.STM32F1xx_DFP.1.0.5 - http://www.keil.com/pack/ - IROM(0x08000000,0x10000) IRAM(0x20000000,0x5000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE - - - UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM)) - 0 - $$Device:STM32F103C8$Device\Include\stm32f10x.h - - - - - - - - - - $$Device:STM32F103C8$SVD\STM32F103xx.svd - 0 - 0 - - - - - - - 0 - 0 - 0 - 0 - 1 - - .\build\keil\Obj\ - rt-thread - 1 - 0 - 1 - 1 - 0 - .\build\keil\List\ - 1 - 0 - 0 - - 0 - 0 - - - 0 - 0 - 0 - 0 - - - 0 - 0 - - - 0 - 0 - 0 - 0 - - - 1 - 0 - fromelf --bin !L --output rtthread.bin - - 0 - 0 - - 0 - - - - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 3 - - - 1 - - - SARMCM3.DLL - -REMAP - DCM.DLL - -pCM3 - SARMCM3.DLL - - TCM.DLL - -pCM3 - - - - 1 - 0 - 0 - 0 - 16 - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - - - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 1 - 1 - - 0 - 1 - - - - - - - - - - - - - - BIN\UL2CM3.DLL - - - - - 1 - 0 - 0 - 1 - 1 - 4096 - - 1 - BIN\UL2CM3.DLL - - - - - - 0 - - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 1 - 0 - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - "Cortex-M3" - - 0 - 0 - 0 - 1 - 1 - 0 - 0 - 0 - 0 - 0 - 8 - 0 - 0 - 0 - 3 - 3 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 1 - 0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x5000 - - - 1 - 0x8000000 - 0x10000 - - - 0 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x8000000 - 0x10000 - - - 1 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x5000 - - - 0 - 0x0 - 0x0 - - - - - - 1 - 1 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 0 - 2 - 0 - 0 - 1 - 0 - - - - - - - - - 1 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - - - - - - - 0 - 0 - 0 - 0 - 1 - 0 - 0x08000000 - 0x20000000 - - .\board\linker_scripts\link.sct - - - - - - - - - - - Source Group 1 - - - - - -