diff --git a/bsp/stm32/stm32f412-st-nucleo/.config b/bsp/stm32/stm32f412-st-nucleo/.config new file mode 100644 index 0000000000000000000000000000000000000000..26313c31d11df62101631f33a7a1a599f3dd37e6 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/.config @@ -0,0 +1,430 @@ +# +# Automatically generated file; DO NOT EDIT. +# RT-Thread Configuration +# + +# +# RT-Thread Kernel +# +CONFIG_RT_NAME_MAX=8 +# CONFIG_RT_USING_ARCH_DATA_TYPE is not set +# CONFIG_RT_USING_SMP is not set +CONFIG_RT_ALIGN_SIZE=4 +# CONFIG_RT_THREAD_PRIORITY_8 is not set +CONFIG_RT_THREAD_PRIORITY_32=y +# CONFIG_RT_THREAD_PRIORITY_256 is not set +CONFIG_RT_THREAD_PRIORITY_MAX=32 +CONFIG_RT_TICK_PER_SECOND=1000 +CONFIG_RT_USING_OVERFLOW_CHECK=y +CONFIG_RT_USING_HOOK=y +CONFIG_RT_USING_IDLE_HOOK=y +CONFIG_RT_IDLE_HOOK_LIST_SIZE=4 +CONFIG_IDLE_THREAD_STACK_SIZE=256 +# CONFIG_RT_USING_TIMER_SOFT is not set +CONFIG_RT_DEBUG=y +# CONFIG_RT_DEBUG_COLOR is not set +# CONFIG_RT_DEBUG_INIT_CONFIG is not set +# CONFIG_RT_DEBUG_THREAD_CONFIG is not set +# CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set +# CONFIG_RT_DEBUG_IPC_CONFIG is not set +# CONFIG_RT_DEBUG_TIMER_CONFIG is not set +# CONFIG_RT_DEBUG_IRQ_CONFIG is not set +# CONFIG_RT_DEBUG_MEM_CONFIG is not set +# CONFIG_RT_DEBUG_SLAB_CONFIG is not set +# CONFIG_RT_DEBUG_MEMHEAP_CONFIG is not set +# CONFIG_RT_DEBUG_MODULE_CONFIG is not set + +# +# Inter-Thread communication +# +CONFIG_RT_USING_SEMAPHORE=y +CONFIG_RT_USING_MUTEX=y +CONFIG_RT_USING_EVENT=y +CONFIG_RT_USING_MAILBOX=y +CONFIG_RT_USING_MESSAGEQUEUE=y +# CONFIG_RT_USING_SIGNALS is not set + +# +# Memory Management +# +CONFIG_RT_USING_MEMPOOL=y +# CONFIG_RT_USING_MEMHEAP is not set +# CONFIG_RT_USING_NOHEAP is not set +CONFIG_RT_USING_SMALL_MEM=y +# CONFIG_RT_USING_SLAB is not set +# CONFIG_RT_USING_MEMTRACE is not set +CONFIG_RT_USING_HEAP=y + +# +# Kernel Device Object +# +CONFIG_RT_USING_DEVICE=y +# CONFIG_RT_USING_DEVICE_OPS is not set +# CONFIG_RT_USING_INTERRUPT_INFO is not set +CONFIG_RT_USING_CONSOLE=y +CONFIG_RT_CONSOLEBUF_SIZE=128 +CONFIG_RT_CONSOLE_DEVICE_NAME="uart3" +CONFIG_RT_VER_NUM=0x40002 +CONFIG_ARCH_ARM=y +CONFIG_RT_USING_CPU_FFS=y +CONFIG_ARCH_ARM_CORTEX_M=y +CONFIG_ARCH_ARM_CORTEX_M4=y +# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set + +# +# RT-Thread Components +# +CONFIG_RT_USING_COMPONENTS_INIT=y +CONFIG_RT_USING_USER_MAIN=y +CONFIG_RT_MAIN_THREAD_STACK_SIZE=2048 +CONFIG_RT_MAIN_THREAD_PRIORITY=10 + +# +# C++ features +# +# CONFIG_RT_USING_CPLUSPLUS is not set + +# +# Command shell +# +CONFIG_RT_USING_FINSH=y +CONFIG_FINSH_THREAD_NAME="tshell" +CONFIG_FINSH_USING_HISTORY=y +CONFIG_FINSH_HISTORY_LINES=5 +CONFIG_FINSH_USING_SYMTAB=y +CONFIG_FINSH_USING_DESCRIPTION=y +# CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set +CONFIG_FINSH_THREAD_PRIORITY=20 +CONFIG_FINSH_THREAD_STACK_SIZE=4096 +CONFIG_FINSH_CMD_SIZE=80 +# CONFIG_FINSH_USING_AUTH is not set +CONFIG_FINSH_USING_MSH=y +CONFIG_FINSH_USING_MSH_DEFAULT=y +CONFIG_FINSH_USING_MSH_ONLY=y +CONFIG_FINSH_ARG_MAX=10 + +# +# Device virtual file system +# +# CONFIG_RT_USING_DFS is not set + +# +# Device Drivers +# +CONFIG_RT_USING_DEVICE_IPC=y +CONFIG_RT_PIPE_BUFSZ=512 +# CONFIG_RT_USING_SYSTEM_WORKQUEUE is not set +CONFIG_RT_USING_SERIAL=y +# CONFIG_RT_SERIAL_USING_DMA is not set +CONFIG_RT_SERIAL_RB_BUFSZ=64 +# CONFIG_RT_USING_CAN is not set +# CONFIG_RT_USING_HWTIMER is not set +# CONFIG_RT_USING_CPUTIME is not set +# CONFIG_RT_USING_I2C is not set +CONFIG_RT_USING_PIN=y +# CONFIG_RT_USING_ADC is not set +# CONFIG_RT_USING_PWM is not set +# CONFIG_RT_USING_MTD_NOR is not set +# CONFIG_RT_USING_MTD_NAND is not set +# CONFIG_RT_USING_PM is not set +# CONFIG_RT_USING_RTC is not set +# CONFIG_RT_USING_SDIO is not set +# CONFIG_RT_USING_SPI is not set +# CONFIG_RT_USING_WDT is not set +# CONFIG_RT_USING_AUDIO is not set +# CONFIG_RT_USING_SENSOR is not set +# CONFIG_RT_USING_TOUCH is not set +# CONFIG_RT_USING_HWCRYPTO is not set +# CONFIG_RT_USING_PULSE_ENCODER is not set +# CONFIG_RT_USING_INPUT_CAPTURE is not set +# CONFIG_RT_USING_WIFI is not set + +# +# Using USB +# +# CONFIG_RT_USING_USB_HOST is not set +# CONFIG_RT_USING_USB_DEVICE is not set + +# +# POSIX layer and C standard library +# +# CONFIG_RT_USING_LIBC is not set +# CONFIG_RT_USING_PTHREADS is not set +CONFIG_RT_LIBC_USING_TIME=y + +# +# Network +# + +# +# Socket abstraction layer +# +# CONFIG_RT_USING_SAL is not set + +# +# Network interface device +# +# CONFIG_RT_USING_NETDEV is not set + +# +# light weight TCP/IP stack +# +# CONFIG_RT_USING_LWIP is not set + +# +# AT commands +# +# CONFIG_RT_USING_AT is not set + +# +# VBUS(Virtual Software BUS) +# +# CONFIG_RT_USING_VBUS is not set + +# +# Utilities +# +# CONFIG_RT_USING_RYM is not set +# CONFIG_RT_USING_ULOG is not set +# CONFIG_RT_USING_UTEST is not set +# CONFIG_RT_USING_LWP is not set + +# +# RT-Thread online packages +# + +# +# IoT - internet of things +# +# CONFIG_PKG_USING_PAHOMQTT is not set +# CONFIG_PKG_USING_WEBCLIENT is not set +# CONFIG_PKG_USING_WEBNET is not set +# CONFIG_PKG_USING_MONGOOSE is not set +# CONFIG_PKG_USING_WEBTERMINAL is not set +# CONFIG_PKG_USING_CJSON is not set +# CONFIG_PKG_USING_JSMN is not set +# CONFIG_PKG_USING_LIBMODBUS is not set +# CONFIG_PKG_USING_FREEMODBUS is not set +# CONFIG_PKG_USING_LJSON is not set +# CONFIG_PKG_USING_EZXML is not set +# CONFIG_PKG_USING_NANOPB is not set + +# +# Wi-Fi +# + +# +# Marvell WiFi +# +# CONFIG_PKG_USING_WLANMARVELL is not set + +# +# Wiced WiFi +# +# CONFIG_PKG_USING_WLAN_WICED is not set +# CONFIG_PKG_USING_RW007 is not set +# CONFIG_PKG_USING_COAP is not set +# CONFIG_PKG_USING_NOPOLL is not set +# CONFIG_PKG_USING_NETUTILS is not set +# CONFIG_PKG_USING_PPP_DEVICE is not set +# CONFIG_PKG_USING_AT_DEVICE is not set +# CONFIG_PKG_USING_ATSRV_SOCKET is not set +# CONFIG_PKG_USING_WIZNET is not set + +# +# IoT Cloud +# +# CONFIG_PKG_USING_ONENET is not set +# CONFIG_PKG_USING_GAGENT_CLOUD is not set +# CONFIG_PKG_USING_ALI_IOTKIT is not set +# CONFIG_PKG_USING_AZURE is not set +# CONFIG_PKG_USING_TENCENT_IOTHUB is not set +# CONFIG_PKG_USING_JIOT-C-SDK is not set +# CONFIG_PKG_USING_NIMBLE is not set +# CONFIG_PKG_USING_OTA_DOWNLOADER is not set +# CONFIG_PKG_USING_IPMSG is not set +# CONFIG_PKG_USING_LSSDP is not set +# CONFIG_PKG_USING_AIRKISS_OPEN is not set +# CONFIG_PKG_USING_LIBRWS is not set +# CONFIG_PKG_USING_TCPSERVER is not set +# CONFIG_PKG_USING_PROTOBUF_C is not set +# CONFIG_PKG_USING_ONNX_PARSER is not set +# CONFIG_PKG_USING_ONNX_BACKEND is not set +# CONFIG_PKG_USING_DLT645 is not set +# CONFIG_PKG_USING_QXWZ is not set + +# +# security packages +# +# CONFIG_PKG_USING_MBEDTLS is not set +# CONFIG_PKG_USING_libsodium is not set +# CONFIG_PKG_USING_TINYCRYPT is not set + +# +# language packages +# +# CONFIG_PKG_USING_LUA is not set +# CONFIG_PKG_USING_JERRYSCRIPT is not set +# CONFIG_PKG_USING_MICROPYTHON is not set + +# +# multimedia packages +# +# CONFIG_PKG_USING_OPENMV is not set +# CONFIG_PKG_USING_MUPDF is not set +# CONFIG_PKG_USING_STEMWIN is not set +# CONFIG_PKG_USING_WAVPLAYER is not set +# CONFIG_PKG_USING_TJPGD is not set + +# +# tools packages +# +# CONFIG_PKG_USING_CMBACKTRACE is not set +# CONFIG_PKG_USING_EASYFLASH is not set +# CONFIG_PKG_USING_EASYLOGGER is not set +# CONFIG_PKG_USING_SYSTEMVIEW is not set +# CONFIG_PKG_USING_RDB is not set +# CONFIG_PKG_USING_QRCODE is not set +# CONFIG_PKG_USING_ULOG_EASYFLASH is not set +# CONFIG_PKG_USING_ADBD is not set + +# +# system packages +# +# CONFIG_PKG_USING_GUIENGINE is not set +# CONFIG_PKG_USING_PERSIMMON is not set +# CONFIG_PKG_USING_CAIRO is not set +# CONFIG_PKG_USING_PIXMAN is not set +# CONFIG_PKG_USING_LWEXT4 is not set +# CONFIG_PKG_USING_PARTITION is not set +# CONFIG_PKG_USING_FAL is not set +# CONFIG_PKG_USING_SQLITE is not set +# CONFIG_PKG_USING_RTI is not set +# CONFIG_PKG_USING_LITTLEVGL2RTT is not set +# CONFIG_PKG_USING_CMSIS is not set +# CONFIG_PKG_USING_DFS_YAFFS is not set +# CONFIG_PKG_USING_LITTLEFS is not set +# CONFIG_PKG_USING_THREAD_POOL is not set +# CONFIG_PKG_USING_ROBOTS is not set + +# +# peripheral libraries and drivers +# +# CONFIG_PKG_USING_SENSORS_DRIVERS is not set +# CONFIG_PKG_USING_REALTEK_AMEBA is not set +# CONFIG_PKG_USING_SHT2X is not set +# CONFIG_PKG_USING_STM32_SDIO is not set +# CONFIG_PKG_USING_ICM20608 is not set +# CONFIG_PKG_USING_U8G2 is not set +# CONFIG_PKG_USING_BUTTON is not set +# CONFIG_PKG_USING_PCF8574 is not set +# CONFIG_PKG_USING_SX12XX is not set +# CONFIG_PKG_USING_SIGNAL_LED is not set +# CONFIG_PKG_USING_LEDBLINK is not set +# CONFIG_PKG_USING_WM_LIBRARIES is not set +# CONFIG_PKG_USING_KENDRYTE_SDK is not set +# CONFIG_PKG_USING_INFRARED is not set +# CONFIG_PKG_USING_ROSSERIAL is not set +# CONFIG_PKG_USING_AGILE_LED is not set +# CONFIG_PKG_USING_AT24CXX is not set +# CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set +# CONFIG_PKG_USING_AD7746 is not set +# CONFIG_PKG_USING_PCA9685 is not set +# CONFIG_PKG_USING_I2C_TOOLS is not set +# CONFIG_PKG_USING_NRF24L01 is not set +# CONFIG_PKG_USING_TOUCH_DRIVERS is not set +# CONFIG_PKG_USING_LCD_DRIVERS is not set +# CONFIG_PKG_USING_MAX17048 is not set +# CONFIG_PKG_USING_RPLIDAR is not set + +# +# miscellaneous packages +# +# CONFIG_PKG_USING_LIBCSV is not set +# CONFIG_PKG_USING_OPTPARSE is not set +# CONFIG_PKG_USING_FASTLZ is not set +# CONFIG_PKG_USING_MINILZO is not set +# CONFIG_PKG_USING_QUICKLZ is not set +# CONFIG_PKG_USING_MULTIBUTTON is not set +# CONFIG_PKG_USING_FLEXIBLE_BUTTON is not set +# CONFIG_PKG_USING_CANFESTIVAL is not set +# CONFIG_PKG_USING_ZLIB is not set +# CONFIG_PKG_USING_DSTR is not set +# CONFIG_PKG_USING_TINYFRAME is not set +# CONFIG_PKG_USING_KENDRYTE_DEMO is not set +# CONFIG_PKG_USING_DIGITALCTRL is not set +# CONFIG_PKG_USING_UPACKER is not set +# CONFIG_PKG_USING_UPARAM is not set + +# +# samples: kernel and components samples +# +# CONFIG_PKG_USING_KERNEL_SAMPLES is not set +# CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set +# CONFIG_PKG_USING_NETWORK_SAMPLES is not set +# CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set +# CONFIG_PKG_USING_HELLO is not set +# CONFIG_PKG_USING_VI is not set +# CONFIG_PKG_USING_NNOM is not set +# CONFIG_PKG_USING_LIBANN is not set +# CONFIG_PKG_USING_ELAPACK is not set +# CONFIG_PKG_USING_ARMv7M_DWT is not set +# CONFIG_PKG_USING_VT100 is not set +# CONFIG_PKG_USING_ULAPACK is not set +# CONFIG_PKG_USING_UKAL is not set + +# +# Privated Packages of RealThread +# +# CONFIG_PKG_USING_CODEC is not set +# CONFIG_PKG_USING_PLAYER is not set +# CONFIG_PKG_USING_MPLAYER is not set +# CONFIG_PKG_USING_PERSIMMON_SRC is not set +# CONFIG_PKG_USING_JS_PERSIMMON is not set +# CONFIG_PKG_USING_JERRYSCRIPT_WIN32 is not set + +# +# Network Utilities +# +# CONFIG_PKG_USING_WICED is not set +# CONFIG_PKG_USING_CLOUDSDK is not set +# CONFIG_PKG_USING_COREMARK is not set +# CONFIG_PKG_USING_POWER_MANAGER is not set +# CONFIG_PKG_USING_RT_OTA is not set +# CONFIG_PKG_USING_RDBD_SRC is not set +# CONFIG_PKG_USING_RTINSIGHT is not set +# CONFIG_PKG_USING_SMARTCONFIG is not set +# CONFIG_PKG_USING_RTX is not set +# CONFIG_RT_USING_TESTCASE is not set +# CONFIG_PKG_USING_NGHTTP2 is not set +# CONFIG_PKG_USING_AVS is not set +# CONFIG_PKG_USING_JOYLINK is not set +# CONFIG_PKG_USING_STS is not set +# CONFIG_PKG_USING_DLMS is not set +# CONFIG_PKG_USING_AUDIO_FRAMEWORK is not set +# CONFIG_PKG_USING_ZBAR is not set +CONFIG_SOC_FAMILY_STM32=y +CONFIG_SOC_SERIES_STM32F4=y + +# +# Hardware Drivers Config +# +CONFIG_SOC_STM32F412ZG=y + +# +# Onboard Peripheral Drivers +# +CONFIG_BSP_USING_STLINK_TO_USART=y + +# +# On-chip Peripheral Drivers +# +CONFIG_BSP_USING_GPIO=y +CONFIG_BSP_USING_UART=y +# CONFIG_BSP_USING_UART2 is not set +CONFIG_BSP_USING_UART3=y +# CONFIG_BSP_USING_ON_CHIP_FLASH is not set + +# +# Board extended module Drivers +# diff --git a/bsp/stm32/stm32f412-st-nucleo/.gitignore b/bsp/stm32/stm32f412-st-nucleo/.gitignore new file mode 100644 index 0000000000000000000000000000000000000000..7221bde019df6157cbf9e42ef5ab8a78420e3b68 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/.gitignore @@ -0,0 +1,42 @@ +*.pyc +*.map +*.dblite +*.elf +*.bin +*.hex +*.axf +*.exe +*.pdb +*.idb +*.ilk +*.old +build +Debug +documentation/html +packages/ +*~ +*.o +*.obj +*.out +*.bak +*.dep +*.lib +*.i +*.d +.DS_Stor* +.config 3 +.config 4 +.config 5 +Midea-X1 +*.uimg +GPATH +GRTAGS +GTAGS +.vscode +JLinkLog.txt +JLinkSettings.ini +DebugConfig/ +RTE/ +settings/ +*.uvguix* +cconfig.h diff --git a/bsp/stm32/stm32f412-st-nucleo/Kconfig b/bsp/stm32/stm32f412-st-nucleo/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..8cbc7b71a8c0cf95b0cefa5f35f19353215eb570 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/Kconfig @@ -0,0 +1,21 @@ +mainmenu "RT-Thread Configuration" + +config BSP_DIR + string + option env="BSP_ROOT" + default "." + +config RTT_DIR + string + option env="RTT_ROOT" + default "../../.." + +config PKGS_DIR + string + option env="PKGS_ROOT" + default "packages" + +source "$RTT_DIR/Kconfig" +source "$PKGS_DIR/Kconfig" +source "../libraries/Kconfig" +source "board/Kconfig" diff --git a/bsp/stm32/stm32f412-st-nucleo/README.md b/bsp/stm32/stm32f412-st-nucleo/README.md new file mode 100644 index 0000000000000000000000000000000000000000..b6d660104c4a7c255e85d9f6e7a5e05d9da59650 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/README.md @@ -0,0 +1,106 @@ +# NUCLEO-F412ZG 开发板 BSP 说明 + +## 简介 + +本文档为 RT-Thread 开发团队为 NUCLEO-F412ZG 开发板提供的 BSP (板级支持包) 说明。 + +主要内容如下： + +- 开发板资源介绍 +- BSP 快速上手 +- 进阶使用方法 + +通过阅读快速上手章节开发者可以快速地上手该 BSP，将 RT-Thread 运行在开发板上。在进阶使用指南章节，将会介绍更多高级功能，帮助开发者利用 RT-Thread 驱动更多板载资源。 + +## 开发板介绍 + +探索者 NUCLEO-F412ZG 是意法半导体推出的一款基于 ARM Cortex-M4 内核的开发板，最高主频为 100Mhz，该开发板具有丰富的板载资源，可以充分发挥 STM32F411ZG 的芯片性能。 + +开发板外观如下图所示： + +![board](figures/board.png) + +该开发板常用 ** 板载资源 ** 如下： + +- MCU：STM32F411ZG，主频 100MHz，1024KB FLASH ，256KB RAM。 +- 常用外设 + - LED：3 个，USB communication (LD1), user LED (LD2), power LED (LD3) 。 + - 按键，2 个，USER and RESET 。 +- 常用接口：USB 支持 3 种不同接口：虚拟 COM 端口、大容量存储和调试端口。 +- 调试接口，板载 ST-LINK/V2-1 调试器。 + +开发板更多详细信息请参考意法半导体 [NUCLEO-F412ZG 开发板介绍](https://www.st.com/en/evaluation-tools/nucleo-f412zg.html)。 + +## 外设支持 + +本 BSP 目前对外设的支持情况如下： + +| **片上外设** | **支持情况** | **备注** | +| :------------ | :----------: | :-----------------------------------: | +| GPIO | 支持 | PA0, PA1... PH1 ---> PIN: 0, 1...63 | +| UART | 支持 | UART2,UART3 | +| onchip_flash | 支持 | | + +## 使用说明 + +使用说明分为如下两个章节： + +- 快速上手 + + 本章节是为刚接触 RT-Thread 的新手准备的使用说明，遵循简单的步骤即可将 RT-Thread 操作系统运行在该开发板上，看到实验效果 。 + +- 进阶使用 + + 本章节是为需要在 RT-Thread 操作系统上使用更多开发板资源的开发者准备的。通过使用 ENV 工具对 BSP 进行配置，可以开启更多板载资源，实现更多高级功能。 + + +### 快速上手 + +本 BSP 为开发者提供 MDK5 和 IAR 工程，并且支持 GCC 开发环境。下面以 MDK5 开发环境为例，介绍如何将系统运行起来。 + +#### 硬件连接 + +使用 Type-A to Micro-B 线连接开发板和 PC 供电，红色 LED LD3 (PWR) 和 LD1 (COM) 会点亮。 + +#### 编译下载 + +双击 project.uvprojx 文件，打开 MDK5 工程，编译并下载程序到开发板。 + +> 工程默认配置使用 ST-LINK 下载程序，点击下载按钮即可下载程序到开发板。 + +#### 运行结果 + +下载程序成功之后，系统会自动运行，观察开发板上 LED 的运行效果，红色 LD3 和 LD1 常亮、绿色 LD2 会周期性闪烁。 + +USB 虚拟 COM 端口默认连接串口 3，在终端工具里打开相应的串口（115200-8-1-N），复位设备后，可以看到 RT-Thread 的输出信息: + +```bash + \ | / +- RT - Thread Operating System + / | \ 4.0.2 build Oct 20 2019 + 2006 - 2019 Copyright by rt-thread team +msh > +``` +### 进阶使用 + +此 BSP 默认只开启了 GPIO 和 串口 3 的功能，更多高级功能需要利用 ENV 工具对 BSP 进行配置，步骤如下： + +1. 在 BSP 下打开 env 工具。 + +2. 输入 `menuconfig` 命令配置工程，配置好之后保存退出。 + +3. 输入 `pkgs --update` 命令更新软件包。 + +4. 输入 `scons --target=mdk5/iar` 命令重新生成工程。 + +本章节更多详细的介绍请参考 [STM32 系列 BSP 外设驱动使用教程](../docs/STM32 系列 BSP 外设驱动使用教程. md)。 + +## 注意事项 + +暂无 + +## 联系人信息 + +维护人: + +- [flybreak](https://github.com/guozhanxin) ，邮箱： \ No newline at end of file diff --git a/bsp/stm32/stm32f412-st-nucleo/SConscript b/bsp/stm32/stm32f412-st-nucleo/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..20f7689c53ca71a676748f79187f9764065466c5 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/SConscript @@ -0,0 +1,15 @@ +# for module compiling +import os +Import('RTT_ROOT') +from building import * + +cwd = GetCurrentDir() +objs = [] +list = os.listdir(cwd) + +for d in list: + path = os.path.join(cwd, d) + if os.path.isfile(os.path.join(path, 'SConscript')): + objs = objs + SConscript(os.path.join(d, 'SConscript')) + +Return('objs') diff --git a/bsp/stm32/stm32f412-st-nucleo/SConstruct b/bsp/stm32/stm32f412-st-nucleo/SConstruct new file mode 100644 index 0000000000000000000000000000000000000000..629f25c6ee6f4a645c8eec066935e414c62753a0 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/SConstruct @@ -0,0 +1,59 @@ +import os +import sys +import rtconfig + +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') +else: + RTT_ROOT = os.path.normpath(os.getcwd() + '/../../..') + +sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')] +try: + from building import * +except: + print('Cannot found RT-Thread root directory, please check RTT_ROOT') + print(RTT_ROOT) + exit(-1) + +TARGET = 'rt-thread.' + rtconfig.TARGET_EXT + +env = Environment(tools = ['mingw'], + AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS, + CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS, + AR = rtconfig.AR, ARFLAGS = '-rc', + CXX = rtconfig.CXX, CXXFLAGS = rtconfig.CXXFLAGS, + LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS) +env.PrependENVPath('PATH', rtconfig.EXEC_PATH) + +if rtconfig.PLATFORM == 'iar': + env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES']) + env.Replace(ARFLAGS = ['']) + env.Replace(LINKCOM = env["LINKCOM"] + ' --map rt-thread.map') + +Export('RTT_ROOT') +Export('rtconfig') + +SDK_ROOT = os.path.abspath('./') + +if os.path.exists(SDK_ROOT + '/libraries'): + libraries_path_prefix = SDK_ROOT + '/libraries' +else: + libraries_path_prefix = os.path.dirname(SDK_ROOT) + '/libraries' + +SDK_LIB = libraries_path_prefix +Export('SDK_LIB') + +# prepare building environment +objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False) + +stm32_library = 'STM32F4xx_HAL' +rtconfig.BSP_LIBRARY_TYPE = stm32_library + +# include libraries +objs.extend(SConscript(os.path.join(libraries_path_prefix, stm32_library, 'SConscript'))) + +# include drivers +objs.extend(SConscript(os.path.join(libraries_path_prefix, 'HAL_Drivers', 'SConscript'))) + +# make a building +DoBuilding(TARGET, objs) diff --git a/bsp/stm32/stm32f412-st-nucleo/applications/SConscript b/bsp/stm32/stm32f412-st-nucleo/applications/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..6f66f7ab7360b02f3561ec14d3f28841190e7e83 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/applications/SConscript @@ -0,0 +1,12 @@ +import rtconfig +from building import * + +cwd = GetCurrentDir() +CPPPATH = [cwd, str(Dir('#'))] +src = Split(""" +main.c +""") + +group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH) + +Return('group') diff --git a/bsp/stm32/stm32f412-st-nucleo/applications/main.c b/bsp/stm32/stm32f412-st-nucleo/applications/main.c new file mode 100644 index 0000000000000000000000000000000000000000..317bc60514ac595674d37e7fd72d6d68bcb3f388 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/applications/main.c @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-06 SummerGift first version + */ + +#include +#include +#include + +/* defined the LED0 pin: PB7 */ +#define LED0_PIN GET_PIN(B, 7) + +int main(void) +{ + int count = 1; + /* set LED0 pin mode to output */ + rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT); + + while (count++) + { + rt_pin_write(LED0_PIN, PIN_HIGH); + rt_thread_mdelay(500); + rt_pin_write(LED0_PIN, PIN_LOW); + rt_thread_mdelay(500); + } + + return RT_EOK; +} diff --git a/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/.mxproject new file mode 100644 index 0000000000000000000000000000000000000000..b011f83e6605a1d533d595fcc9c1c07d39412688 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/.mxproject @@ -0,0 +1,17 @@ +[PreviousGenFiles] +HeaderPath=E:/rt-thread-work/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Inc +HeaderFiles=stm32f4xx_it.h;stm32f4xx_hal_conf.h;main.h; +SourcePath=E:/rt-thread-work/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src +SourceFiles=stm32f4xx_it.c;stm32f4xx_hal_msp.c;main.c; + +[PreviousLibFiles] +LibFiles=Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h;Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f412zx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Include/system_stm32f4xx.h;Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h; + +[PreviousUsedIarFiles] +SourceFiles=..\Src\main.c;..\Src\stm32f4xx_it.c;..\Src\stm32f4xx_hal_msp.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;../\Src/system_stm32f4xx.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;../\Src/system_stm32f4xx.c;../Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;null; +HeaderPath=..\Drivers\STM32F4xx_HAL_Driver\Inc;..\Drivers\STM32F4xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F4xx\Include;..\Drivers\CMSIS\Include;..\Inc; + +[PreviousUsedKeilFiles] +SourceFiles=..\Src\main.c;..\Src\stm32f4xx_it.c;..\Src\stm32f4xx_hal_msp.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;../\Src/system_stm32f4xx.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c;../Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c;../\Src/system_stm32f4xx.c;../Drivers/CMSIS/Device/ST/STM32F4xx/Source/Templates/system_stm32f4xx.c;null; +HeaderPath=..\Drivers\STM32F4xx_HAL_Driver\Inc;..\Drivers\STM32F4xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F4xx\Include;..\Drivers\CMSIS\Include;..\Inc; + diff --git a/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc new file mode 100644 index 0000000000000000000000000000000000000000..aaf70612f151b47af083c7cef0439b6076fa0d75 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/CubeMX_Config.ioc @@ -0,0 +1,257 @@ +#MicroXplorer Configuration settings - do not modify +File.Version=6 +KeepUserPlacement=true +Mcu.Family=STM32F4 +Mcu.IP0=NVIC +Mcu.IP1=RCC +Mcu.IP2=SYS +Mcu.IP3=USART3 +Mcu.IP4=USB_OTG_FS +Mcu.IPNb=5 +Mcu.Name=STM32F412Z(E-G)Tx +Mcu.Package=LQFP144 +Mcu.Pin0=PC13 +Mcu.Pin1=PC14-OSC32_IN +Mcu.Pin10=PC9 +Mcu.Pin11=PA8 +Mcu.Pin12=PA9 +Mcu.Pin13=PA10 +Mcu.Pin14=PA11 +Mcu.Pin15=PA12 +Mcu.Pin16=PA13 +Mcu.Pin17=PA14 +Mcu.Pin18=PB3 +Mcu.Pin19=PB7 +Mcu.Pin2=PC15-OSC32_OUT +Mcu.Pin20=VP_SYS_VS_Systick +Mcu.Pin3=PH0 - OSC_IN +Mcu.Pin4=PH1 - OSC_OUT +Mcu.Pin5=PB14 +Mcu.Pin6=PD8 +Mcu.Pin7=PD9 +Mcu.Pin8=PG6 +Mcu.Pin9=PG7 +Mcu.PinsNb=21 +Mcu.ThirdPartyNb=0 +Mcu.UserConstants= +Mcu.UserName=STM32F412ZGTx +MxCube.Version=5.0.0 +MxDb.Version=DB.5.0.0 +NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:true +NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:true +NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:true +NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:true +NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:true +NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false +NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 +NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false +NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:true +NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:true +PA10.GPIOParameters=GPIO_Label +PA10.GPIO_Label=USB_ID +PA10.Locked=true +PA10.Signal=USB_OTG_FS_ID +PA11.GPIOParameters=GPIO_Label +PA11.GPIO_Label=USB_DM +PA11.Locked=true +PA11.Mode=Device_Only +PA11.Signal=USB_OTG_FS_DM +PA12.GPIOParameters=GPIO_Label +PA12.GPIO_Label=USB_DP +PA12.Locked=true +PA12.Mode=Device_Only +PA12.Signal=USB_OTG_FS_DP +PA13.GPIOParameters=GPIO_Label +PA13.GPIO_Label=TMS +PA13.Locked=true +PA13.Mode=Serial_Wire +PA13.Signal=SYS_JTMS-SWDIO +PA14.GPIOParameters=GPIO_Label +PA14.GPIO_Label=TCK +PA14.Locked=true +PA14.Mode=Serial_Wire +PA14.Signal=SYS_JTCK-SWCLK +PA8.GPIOParameters=GPIO_Label +PA8.GPIO_Label=USB_SOF [TP1] +PA8.Locked=true +PA8.Mode=Activate_SOF_FS +PA8.Signal=USB_OTG_FS_SOF +PA9.GPIOParameters=GPIO_Label +PA9.GPIO_Label=USB_VBUS +PA9.Locked=true +PA9.Mode=Activate_VBUS +PA9.Signal=USB_OTG_FS_VBUS +PB14.GPIOParameters=GPIO_Label +PB14.GPIO_Label=LD3 [Red] +PB14.Locked=true +PB14.Signal=GPIO_Output +PB3.GPIOParameters=GPIO_Label +PB3.GPIO_Label=SWO +PB3.Locked=true +PB3.Signal=SYS_JTDO-SWO +PB7.GPIOParameters=GPIO_Label +PB7.GPIO_Label=LD2 [Blue] +PB7.Locked=true +PB7.Signal=GPIO_Output +PC13.GPIOParameters=GPIO_Label +PC13.GPIO_Label=USER_Btn [B1] +PC13.Locked=true +PC13.Signal=GPXTI13 +PC14-OSC32_IN.Locked=true +PC14-OSC32_IN.Mode=LSE-External-Oscillator +PC14-OSC32_IN.Signal=RCC_OSC32_IN +PC15-OSC32_OUT.Locked=true +PC15-OSC32_OUT.Mode=LSE-External-Oscillator +PC15-OSC32_OUT.Signal=RCC_OSC32_OUT +PC9.GPIOParameters=GPIO_Label +PC9.GPIO_Label=LD1 [Green] +PC9.Locked=true +PC9.Signal=GPIO_Output +PCC.Checker=false +PCC.Line=STM32F412 +PCC.MCU=STM32F412Z(E-G)Tx +PCC.PartNumber=STM32F412ZGTx +PCC.Seq0=0 +PCC.Series=STM32F4 +PCC.Temperature=25 +PCC.Vdd=null +PD8.GPIOParameters=GPIO_Label +PD8.GPIO_Label=STLK_RX [STM32F103CBT6_PA3] +PD8.Locked=true +PD8.Mode=Asynchronous +PD8.Signal=USART3_TX +PD9.GPIOParameters=GPIO_Label +PD9.GPIO_Label=STLK_TX [STM32F103CBT6_PA2] +PD9.Locked=true +PD9.Mode=Asynchronous +PD9.Signal=USART3_RX +PG6.GPIOParameters=GPIO_Label +PG6.GPIO_Label=USB_PowerSwitchOn [STMPS2151STR_EN] +PG6.Locked=true +PG6.Signal=GPIO_Output +PG7.GPIOParameters=GPIO_Label +PG7.GPIO_Label=USB_OverCurrent [STMPS2151STR_FAULT] +PG7.Locked=true +PG7.Signal=GPIO_Input +PH0\ -\ OSC_IN.GPIOParameters=GPIO_Label +PH0\ -\ OSC_IN.GPIO_Label=MCO +PH0\ -\ OSC_IN.Locked=true +PH0\ -\ OSC_IN.Mode=HSE-External-Clock-Source +PH0\ -\ OSC_IN.Signal=RCC_OSC_IN +PH1\ -\ OSC_OUT.Mode=HSE-External-Clock-Source +PH1\ -\ OSC_OUT.Signal=RCC_OSC_OUT +PinOutPanel.RotationAngle=0 +ProjectManager.AskForMigrate=true +ProjectManager.BackupPrevious=false +ProjectManager.CompilerOptimize=6 +ProjectManager.ComputerToolchain=false +ProjectManager.CoupleFile=false +ProjectManager.CustomerFirmwarePackage= +ProjectManager.DefaultFWLocation=true +ProjectManager.DeletePrevious=true +ProjectManager.DeviceId=STM32F412ZGTx +ProjectManager.FirmwarePackage=STM32Cube FW_F4 V1.23.0 +ProjectManager.FreePins=false +ProjectManager.HalAssertFull=false +ProjectManager.HeapSize=0x200 +ProjectManager.KeepUserCode=true +ProjectManager.LastFirmware=true +ProjectManager.LibraryCopy=0 +ProjectManager.MainLocation=Src +ProjectManager.NoMain=false +ProjectManager.PreviousToolchain= +ProjectManager.ProjectBuild=false +ProjectManager.ProjectFileName=CubeMX_Config.ioc +ProjectManager.ProjectName=CubeMX_Config +ProjectManager.StackSize=0x400 +ProjectManager.TargetToolchain=MDK-ARM V5 +ProjectManager.ToolChainLocation= +ProjectManager.UnderRoot=false +ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART3_UART_Init-USART3-false-HAL-true,4-MX_USB_OTG_FS_PCD_Init-USB_OTG_FS-false-HAL-true +RCC.48MHZClocksFreq_Value=24000000 +RCC.ADC12outputFreq_Value=72000000 +RCC.ADC34outputFreq_Value=72000000 +RCC.AHBFreq_Value=96000000 +RCC.APB1CLKDivider=RCC_HCLK_DIV2 +RCC.APB1Freq_Value=48000000 +RCC.APB1TimFreq_Value=96000000 +RCC.APB2Freq_Value=96000000 +RCC.APB2TimFreq_Value=96000000 +RCC.CortexFreq_Value=96000000 +RCC.DFSDMAudioFreq_Value=48000000 +RCC.DFSDMFreq_Value=96000000 +RCC.EthernetFreq_Value=8000000 +RCC.FCLKCortexFreq_Value=96000000 +RCC.FMPI2C1Freq_Value=48000000 +RCC.FamilyName=M +RCC.HCLKFreq_Value=96000000 +RCC.HSE_VALUE=8000000 +RCC.HSI_VALUE=16000000 +RCC.I2C1Freq_Value=8000000 +RCC.I2C2Freq_Value=8000000 +RCC.I2C3Freq_Value=8000000 +RCC.I2S1Freq_Value=48000000 +RCC.I2S2Freq_Value=48000000 +RCC.I2SClocksFreq_Value=48000000 +RCC.IPParameters=48MHZClocksFreq_Value,ADC12outputFreq_Value,ADC34outputFreq_Value,AHBFreq_Value,APB1CLKDivider,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMAudioFreq_Value,DFSDMFreq_Value,EthernetFreq_Value,FCLKCortexFreq_Value,FMPI2C1Freq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2S1Freq_Value,I2S2Freq_Value,I2SClocksFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MCO2PinFreq_Value,MCOFreq_Value,PLLCLKFreq_Value,PLLI2SPCLKFreq_Value,PLLI2SQCLKFreq_Value,PLLI2SQoutputFreq_Value,PLLI2SRCLKFreq_Value,PLLI2SoutputFreq_Value,PLLM,PLLMCOFreq_Value,PLLMUL,PLLN,PLLP,PLLQ,PLLQCLKFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLRoutputFreq_Value,PRESCALERUSB,PWRFreq_Value,RNGFreq_Value,RTCFreq_Value,RTCHSEDivFreq_Value,SDIOFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,SYSCLKSourceVirtual,TIM15Freq_Value,TIM16Freq_Value,TIM17Freq_Value,TIM1Freq_Value,TIM20Freq_Value,TIM2Freq_Value,TIM3Freq_Value,TIM8Freq_Value,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOI2SInputFreq_Value,VCOI2SOutputFreq_Value,VCOInputFreq_Value,VCOInputMFreq_Value,VCOOutput2Freq_Value,VCOOutputFreq_Value,VcooutputI2S,WatchDogFreq_Value +RCC.LSI_VALUE=32000 +RCC.MCO1PinFreq_Value=16000000 +RCC.MCO2PinFreq_Value=96000000 +RCC.MCOFreq_Value=72000000 +RCC.PLLCLKFreq_Value=96000000 +RCC.PLLI2SPCLKFreq_Value=48000000 +RCC.PLLI2SQCLKFreq_Value=48000000 +RCC.PLLI2SQoutputFreq_Value=48000000 +RCC.PLLI2SRCLKFreq_Value=48000000 +RCC.PLLI2SoutputFreq_Value=48000000 +RCC.PLLM=8 +RCC.PLLMCOFreq_Value=72000000 +RCC.PLLMUL=RCC_PLL_MUL9 +RCC.PLLN=384 +RCC.PLLP=RCC_PLLP_DIV4 +RCC.PLLQ=8 +RCC.PLLQCLKFreq_Value=48000000 +RCC.PLLQoutputFreq_Value=48000000 +RCC.PLLRCLKFreq_Value=192000000 +RCC.PLLRoutputFreq_Value=192000000 +RCC.PRESCALERUSB=RCC_USBCLKSOURCE_PLL_DIV1_5 +RCC.PWRFreq_Value=96000000 +RCC.RNGFreq_Value=48000000 +RCC.RTCFreq_Value=32000 +RCC.RTCHSEDivFreq_Value=4000000 +RCC.SDIOFreq_Value=48000000 +RCC.SYSCLKFreq_VALUE=96000000 +RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK +RCC.SYSCLKSourceVirtual=RCC_SYSCLKSOURCE_PLLCLK +RCC.TIM15Freq_Value=72000000 +RCC.TIM16Freq_Value=72000000 +RCC.TIM17Freq_Value=72000000 +RCC.TIM1Freq_Value=72000000 +RCC.TIM20Freq_Value=72000000 +RCC.TIM2Freq_Value=72000000 +RCC.TIM3Freq_Value=72000000 +RCC.TIM8Freq_Value=72000000 +RCC.UART4Freq_Value=36000000 +RCC.UART5Freq_Value=36000000 +RCC.USART1Freq_Value=72000000 +RCC.USART2Freq_Value=36000000 +RCC.USART3Freq_Value=36000000 +RCC.USBFreq_Value=48000000 +RCC.VCOI2SInputFreq_Value=500000 +RCC.VCOI2SOutputFreq_Value=96000000 +RCC.VCOInputFreq_Value=1000000 +RCC.VCOInputMFreq_Value=500000 +RCC.VCOOutput2Freq_Value=8000000 +RCC.VCOOutputFreq_Value=384000000 +RCC.VcooutputI2S=48000000 +RCC.WatchDogFreq_Value=32000 +SH.GPXTI13.0=GPIO_EXTI13 +SH.GPXTI13.ConfNb=1 +USART3.IPParameters=VirtualMode +USART3.VirtualMode=VM_ASYNC +USB_OTG_FS.IPParameters=VirtualMode +USB_OTG_FS.VirtualMode=Device_Only +VP_SYS_VS_Systick.Mode=SysTick +VP_SYS_VS_Systick.Signal=SYS_VS_Systick +board=NUCLEO-F412ZG +boardIOC=true diff --git a/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Inc/main.h b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Inc/main.h new file mode 100644 index 0000000000000000000000000000000000000000..04267febcc78ea9eea13581131ad8e9223ea4209 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Inc/main.h @@ -0,0 +1,125 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.h + * @brief : Header for main.c file. + * This file contains the common defines of the application. + ****************************************************************************** + ** This notice applies to any and all portions of this file + * that are not between comment pairs USER CODE BEGIN and + * USER CODE END. Other portions of this file, whether + * inserted by the user or by software development tools + * are owned by their respective copyright owners. + * + * COPYRIGHT(c) 2018 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __MAIN_H +#define __MAIN_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx_hal.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void Error_Handler(void); + +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +/* Private defines -----------------------------------------------------------*/ +#define USER_Btn_Pin GPIO_PIN_13 +#define USER_Btn_GPIO_Port GPIOC +#define MCO_Pin GPIO_PIN_0 +#define MCO_GPIO_Port GPIOH +#define LD3_Pin GPIO_PIN_14 +#define LD3_GPIO_Port GPIOB +#define STLK_RX_Pin GPIO_PIN_8 +#define STLK_RX_GPIO_Port GPIOD +#define STLK_TX_Pin GPIO_PIN_9 +#define STLK_TX_GPIO_Port GPIOD +#define USB_PowerSwitchOn_Pin GPIO_PIN_6 +#define USB_PowerSwitchOn_GPIO_Port GPIOG +#define USB_OverCurrent_Pin GPIO_PIN_7 +#define USB_OverCurrent_GPIO_Port GPIOG +#define LD1_Pin GPIO_PIN_9 +#define LD1_GPIO_Port GPIOC +#define USB_SOF_Pin GPIO_PIN_8 +#define USB_SOF_GPIO_Port GPIOA +#define USB_VBUS_Pin GPIO_PIN_9 +#define USB_VBUS_GPIO_Port GPIOA +#define USB_ID_Pin GPIO_PIN_10 +#define USB_ID_GPIO_Port GPIOA +#define USB_DM_Pin GPIO_PIN_11 +#define USB_DM_GPIO_Port GPIOA +#define USB_DP_Pin GPIO_PIN_12 +#define USB_DP_GPIO_Port GPIOA +#define TMS_Pin GPIO_PIN_13 +#define TMS_GPIO_Port GPIOA +#define TCK_Pin GPIO_PIN_14 +#define TCK_GPIO_Port GPIOA +#define SWO_Pin GPIO_PIN_3 +#define SWO_GPIO_Port GPIOB +#define LD2_Pin GPIO_PIN_7 +#define LD2_GPIO_Port GPIOB +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +#ifdef __cplusplus +} +#endif + +#endif /* __MAIN_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h new file mode 100644 index 0000000000000000000000000000000000000000..c981417f00a35a038c9c34f201ed65121f5492e6 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Inc/stm32f4xx_hal_conf.h @@ -0,0 +1,451 @@ +/** + ****************************************************************************** + * @file stm32f4xx_hal_conf.h + * @brief HAL configuration file. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2019 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_HAL_CONF_H +#define __STM32F4xx_HAL_CONF_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Exported types ------------------------------------------------------------*/ +/* Exported constants --------------------------------------------------------*/ + +/* ########################## Module Selection ############################## */ +/** + * @brief This is the list of modules to be used in the HAL driver + */ +#define HAL_MODULE_ENABLED + +/* #define HAL_ADC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_CAN_MODULE_ENABLED */ +/* #define HAL_CRC_MODULE_ENABLED */ +/* #define HAL_CRYP_MODULE_ENABLED */ +/* #define HAL_DAC_MODULE_ENABLED */ +/* #define HAL_DCMI_MODULE_ENABLED */ +/* #define HAL_DMA2D_MODULE_ENABLED */ +/* #define HAL_ETH_MODULE_ENABLED */ +/* #define HAL_NAND_MODULE_ENABLED */ +/* #define HAL_NOR_MODULE_ENABLED */ +/* #define HAL_PCCARD_MODULE_ENABLED */ +/* #define HAL_SRAM_MODULE_ENABLED */ +/* #define HAL_SDRAM_MODULE_ENABLED */ +/* #define HAL_HASH_MODULE_ENABLED */ +/* #define HAL_I2C_MODULE_ENABLED */ +/* #define HAL_I2S_MODULE_ENABLED */ +/* #define HAL_IWDG_MODULE_ENABLED */ +/* #define HAL_LTDC_MODULE_ENABLED */ +/* #define HAL_RNG_MODULE_ENABLED */ +/* #define HAL_RTC_MODULE_ENABLED */ +/* #define HAL_SAI_MODULE_ENABLED */ +/* #define HAL_SD_MODULE_ENABLED */ +/* #define HAL_MMC_MODULE_ENABLED */ +/* #define HAL_SPI_MODULE_ENABLED */ +/* #define HAL_TIM_MODULE_ENABLED */ +#define HAL_UART_MODULE_ENABLED +/* #define HAL_USART_MODULE_ENABLED */ +/* #define HAL_IRDA_MODULE_ENABLED */ +/* #define HAL_SMARTCARD_MODULE_ENABLED */ +/* #define HAL_WWDG_MODULE_ENABLED */ +#define HAL_PCD_MODULE_ENABLED +/* #define HAL_HCD_MODULE_ENABLED */ +/* #define HAL_DSI_MODULE_ENABLED */ +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_QSPI_MODULE_ENABLED */ +/* #define HAL_CEC_MODULE_ENABLED */ +/* #define HAL_FMPI2C_MODULE_ENABLED */ +/* #define HAL_SPDIFRX_MODULE_ENABLED */ +/* #define HAL_DFSDM_MODULE_ENABLED */ +/* #define HAL_LPTIM_MODULE_ENABLED */ +/* #define HAL_EXTI_MODULE_ENABLED */ +#define HAL_GPIO_MODULE_ENABLED +#define HAL_DMA_MODULE_ENABLED +#define HAL_RCC_MODULE_ENABLED +#define HAL_FLASH_MODULE_ENABLED +#define HAL_PWR_MODULE_ENABLED +#define HAL_CORTEX_MODULE_ENABLED + +/* ########################## HSE/HSI Values adaptation ##################### */ +/** + * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSE is used as system clock source, directly or through the PLL). + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)8000000U) /*!< Value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSE_STARTUP_TIMEOUT) + #define HSE_STARTUP_TIMEOUT ((uint32_t)100U) /*!< Time out for HSE start up, in ms */ +#endif /* HSE_STARTUP_TIMEOUT */ + +/** + * @brief Internal High Speed oscillator (HSI) value. + * This value is used by the RCC HAL module to compute the system frequency + * (when HSI is used as system clock source, directly or through the PLL). + */ +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @brief Internal Low Speed oscillator (LSI) value. + */ +#if !defined (LSI_VALUE) + #define LSI_VALUE ((uint32_t)32000U) /*!< LSI Typical Value in Hz*/ +#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz + The real value may vary depending on the variations + in voltage and temperature.*/ +/** + * @brief External Low Speed oscillator (LSE) value. + */ +#if !defined (LSE_VALUE) + #define LSE_VALUE ((uint32_t)32768U) /*!< Value of the External Low Speed oscillator in Hz */ +#endif /* LSE_VALUE */ + +#if !defined (LSE_STARTUP_TIMEOUT) + #define LSE_STARTUP_TIMEOUT ((uint32_t)5000U) /*!< Time out for LSE start up, in ms */ +#endif /* LSE_STARTUP_TIMEOUT */ + +/** + * @brief External clock source for I2S peripheral + * This value is used by the I2S HAL module to compute the I2S clock source + * frequency, this source is inserted directly through I2S_CKIN pad. + */ +#if !defined (EXTERNAL_CLOCK_VALUE) + #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000U) /*!< Value of the External audio frequency in Hz*/ +#endif /* EXTERNAL_CLOCK_VALUE */ + +/* Tip: To avoid modifying this file each time you need to use different HSE, + === you can define the HSE value in your toolchain compiler preprocessor. */ + +/* ########################### System Configuration ######################### */ +/** + * @brief This is the HAL system configuration section + */ +#define VDD_VALUE ((uint32_t)3300U) /*!< Value of VDD in mv */ +#define TICK_INT_PRIORITY ((uint32_t)0U) /*!< tick interrupt priority */ +#define USE_RTOS 0U +#define PREFETCH_ENABLE 1U +#define INSTRUCTION_CACHE_ENABLE 1U +#define DATA_CACHE_ENABLE 1U + +/* ########################## Assert Selection ############################## */ +/** + * @brief Uncomment the line below to expanse the "assert_param" macro in the + * HAL drivers code + */ +/* #define USE_FULL_ASSERT 1U */ + +/* ################## Ethernet peripheral configuration ##################### */ + +/* Section 1 : Ethernet peripheral configuration */ + +/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ +#define MAC_ADDR0 2U +#define MAC_ADDR1 0U +#define MAC_ADDR2 0U +#define MAC_ADDR3 0U +#define MAC_ADDR4 0U +#define MAC_ADDR5 0U + +/* Definition of the Ethernet driver buffers size and count */ +#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ +#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ +#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ +#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ + +/* Section 2: PHY configuration section */ + +/* DP83848_PHY_ADDRESS Address*/ +#define DP83848_PHY_ADDRESS 0x01U +/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ +#define PHY_RESET_DELAY ((uint32_t)0x000000FFU) +/* PHY Configuration delay */ +#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFFU) + +#define PHY_READ_TO ((uint32_t)0x0000FFFFU) +#define PHY_WRITE_TO ((uint32_t)0x0000FFFFU) + +/* Section 3: Common PHY Registers */ + +#define PHY_BCR ((uint16_t)0x0000U) /*!< Transceiver Basic Control Register */ +#define PHY_BSR ((uint16_t)0x0001U) /*!< Transceiver Basic Status Register */ + +#define PHY_RESET ((uint16_t)0x8000U) /*!< PHY Reset */ +#define PHY_LOOPBACK ((uint16_t)0x4000U) /*!< Select loop-back mode */ +#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100U) /*!< Set the full-duplex mode at 100 Mb/s */ +#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000U) /*!< Set the half-duplex mode at 100 Mb/s */ +#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100U) /*!< Set the full-duplex mode at 10 Mb/s */ +#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000U) /*!< Set the half-duplex mode at 10 Mb/s */ +#define PHY_AUTONEGOTIATION ((uint16_t)0x1000U) /*!< Enable auto-negotiation function */ +#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200U) /*!< Restart auto-negotiation function */ +#define PHY_POWERDOWN ((uint16_t)0x0800U) /*!< Select the power down mode */ +#define PHY_ISOLATE ((uint16_t)0x0400U) /*!< Isolate PHY from MII */ + +#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020U) /*!< Auto-Negotiation process completed */ +#define PHY_LINKED_STATUS ((uint16_t)0x0004U) /*!< Valid link established */ +#define PHY_JABBER_DETECTION ((uint16_t)0x0002U) /*!< Jabber condition detected */ + +/* Section 4: Extended PHY Registers */ +#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */ + +#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */ +#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */ + +/* ################## SPI peripheral configuration ########################## */ + +/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver +* Activated: CRC code is present inside driver +* Deactivated: CRC code cleaned from driver +*/ + +#define USE_SPI_CRC 0U + +/* Includes ------------------------------------------------------------------*/ +/** + * @brief Include module's header file + */ + +#ifdef HAL_RCC_MODULE_ENABLED + #include "stm32f4xx_hal_rcc.h" +#endif /* HAL_RCC_MODULE_ENABLED */ + +#ifdef HAL_EXTI_MODULE_ENABLED + #include "stm32f4xx_hal_exti.h" +#endif /* HAL_EXTI_MODULE_ENABLED */ + +#ifdef HAL_GPIO_MODULE_ENABLED + #include "stm32f4xx_hal_gpio.h" +#endif /* HAL_GPIO_MODULE_ENABLED */ + +#ifdef HAL_DMA_MODULE_ENABLED + #include "stm32f4xx_hal_dma.h" +#endif /* HAL_DMA_MODULE_ENABLED */ + +#ifdef HAL_CORTEX_MODULE_ENABLED + #include "stm32f4xx_hal_cortex.h" +#endif /* HAL_CORTEX_MODULE_ENABLED */ + +#ifdef HAL_ADC_MODULE_ENABLED + #include "stm32f4xx_hal_adc.h" +#endif /* HAL_ADC_MODULE_ENABLED */ + +#ifdef HAL_CAN_MODULE_ENABLED + #include "stm32f4xx_hal_can.h" +#endif /* HAL_CAN_MODULE_ENABLED */ + +#ifdef HAL_CRC_MODULE_ENABLED + #include "stm32f4xx_hal_crc.h" +#endif /* HAL_CRC_MODULE_ENABLED */ + +#ifdef HAL_CRYP_MODULE_ENABLED + #include "stm32f4xx_hal_cryp.h" +#endif /* HAL_CRYP_MODULE_ENABLED */ + +#ifdef HAL_DMA2D_MODULE_ENABLED + #include "stm32f4xx_hal_dma2d.h" +#endif /* HAL_DMA2D_MODULE_ENABLED */ + +#ifdef HAL_DAC_MODULE_ENABLED + #include "stm32f4xx_hal_dac.h" +#endif /* HAL_DAC_MODULE_ENABLED */ + +#ifdef HAL_DCMI_MODULE_ENABLED + #include "stm32f4xx_hal_dcmi.h" +#endif /* HAL_DCMI_MODULE_ENABLED */ + +#ifdef HAL_ETH_MODULE_ENABLED + #include "stm32f4xx_hal_eth.h" +#endif /* HAL_ETH_MODULE_ENABLED */ + +#ifdef HAL_FLASH_MODULE_ENABLED + #include "stm32f4xx_hal_flash.h" +#endif /* HAL_FLASH_MODULE_ENABLED */ + +#ifdef HAL_SRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sram.h" +#endif /* HAL_SRAM_MODULE_ENABLED */ + +#ifdef HAL_NOR_MODULE_ENABLED + #include "stm32f4xx_hal_nor.h" +#endif /* HAL_NOR_MODULE_ENABLED */ + +#ifdef HAL_NAND_MODULE_ENABLED + #include "stm32f4xx_hal_nand.h" +#endif /* HAL_NAND_MODULE_ENABLED */ + +#ifdef HAL_PCCARD_MODULE_ENABLED + #include "stm32f4xx_hal_pccard.h" +#endif /* HAL_PCCARD_MODULE_ENABLED */ + +#ifdef HAL_SDRAM_MODULE_ENABLED + #include "stm32f4xx_hal_sdram.h" +#endif /* HAL_SDRAM_MODULE_ENABLED */ + +#ifdef HAL_HASH_MODULE_ENABLED + #include "stm32f4xx_hal_hash.h" +#endif /* HAL_HASH_MODULE_ENABLED */ + +#ifdef HAL_I2C_MODULE_ENABLED + #include "stm32f4xx_hal_i2c.h" +#endif /* HAL_I2C_MODULE_ENABLED */ + +#ifdef HAL_I2S_MODULE_ENABLED + #include "stm32f4xx_hal_i2s.h" +#endif /* HAL_I2S_MODULE_ENABLED */ + +#ifdef HAL_IWDG_MODULE_ENABLED + #include "stm32f4xx_hal_iwdg.h" +#endif /* HAL_IWDG_MODULE_ENABLED */ + +#ifdef HAL_LTDC_MODULE_ENABLED + #include "stm32f4xx_hal_ltdc.h" +#endif /* HAL_LTDC_MODULE_ENABLED */ + +#ifdef HAL_PWR_MODULE_ENABLED + #include "stm32f4xx_hal_pwr.h" +#endif /* HAL_PWR_MODULE_ENABLED */ + +#ifdef HAL_RNG_MODULE_ENABLED + #include "stm32f4xx_hal_rng.h" +#endif /* HAL_RNG_MODULE_ENABLED */ + +#ifdef HAL_RTC_MODULE_ENABLED + #include "stm32f4xx_hal_rtc.h" +#endif /* HAL_RTC_MODULE_ENABLED */ + +#ifdef HAL_SAI_MODULE_ENABLED + #include "stm32f4xx_hal_sai.h" +#endif /* HAL_SAI_MODULE_ENABLED */ + +#ifdef HAL_SD_MODULE_ENABLED + #include "stm32f4xx_hal_sd.h" +#endif /* HAL_SD_MODULE_ENABLED */ + +#ifdef HAL_MMC_MODULE_ENABLED + #include "stm32f4xx_hal_mmc.h" +#endif /* HAL_MMC_MODULE_ENABLED */ + +#ifdef HAL_SPI_MODULE_ENABLED + #include "stm32f4xx_hal_spi.h" +#endif /* HAL_SPI_MODULE_ENABLED */ + +#ifdef HAL_TIM_MODULE_ENABLED + #include "stm32f4xx_hal_tim.h" +#endif /* HAL_TIM_MODULE_ENABLED */ + +#ifdef HAL_UART_MODULE_ENABLED + #include "stm32f4xx_hal_uart.h" +#endif /* HAL_UART_MODULE_ENABLED */ + +#ifdef HAL_USART_MODULE_ENABLED + #include "stm32f4xx_hal_usart.h" +#endif /* HAL_USART_MODULE_ENABLED */ + +#ifdef HAL_IRDA_MODULE_ENABLED + #include "stm32f4xx_hal_irda.h" +#endif /* HAL_IRDA_MODULE_ENABLED */ + +#ifdef HAL_SMARTCARD_MODULE_ENABLED + #include "stm32f4xx_hal_smartcard.h" +#endif /* HAL_SMARTCARD_MODULE_ENABLED */ + +#ifdef HAL_WWDG_MODULE_ENABLED + #include "stm32f4xx_hal_wwdg.h" +#endif /* HAL_WWDG_MODULE_ENABLED */ + +#ifdef HAL_PCD_MODULE_ENABLED + #include "stm32f4xx_hal_pcd.h" +#endif /* HAL_PCD_MODULE_ENABLED */ + +#ifdef HAL_HCD_MODULE_ENABLED + #include "stm32f4xx_hal_hcd.h" +#endif /* HAL_HCD_MODULE_ENABLED */ + +#ifdef HAL_DSI_MODULE_ENABLED + #include "stm32f4xx_hal_dsi.h" +#endif /* HAL_DSI_MODULE_ENABLED */ + +#ifdef HAL_QSPI_MODULE_ENABLED + #include "stm32f4xx_hal_qspi.h" +#endif /* HAL_QSPI_MODULE_ENABLED */ + +#ifdef HAL_CEC_MODULE_ENABLED + #include "stm32f4xx_hal_cec.h" +#endif /* HAL_CEC_MODULE_ENABLED */ + +#ifdef HAL_FMPI2C_MODULE_ENABLED + #include "stm32f4xx_hal_fmpi2c.h" +#endif /* HAL_FMPI2C_MODULE_ENABLED */ + +#ifdef HAL_SPDIFRX_MODULE_ENABLED + #include "stm32f4xx_hal_spdifrx.h" +#endif /* HAL_SPDIFRX_MODULE_ENABLED */ + +#ifdef HAL_DFSDM_MODULE_ENABLED + #include "stm32f4xx_hal_dfsdm.h" +#endif /* HAL_DFSDM_MODULE_ENABLED */ + +#ifdef HAL_LPTIM_MODULE_ENABLED + #include "stm32f4xx_hal_lptim.h" +#endif /* HAL_LPTIM_MODULE_ENABLED */ + +/* Exported macro ------------------------------------------------------------*/ +#ifdef USE_FULL_ASSERT +/** + * @brief The assert_param macro is used for function's parameters check. + * @param expr: If expr is false, it calls assert_failed function + * which reports the name of the source file and the source + * line number of the call that failed. + * If expr is true, it returns no value. + * @retval None + */ + #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) +/* Exported functions ------------------------------------------------------- */ + void assert_failed(uint8_t* file, uint32_t line); +#else + #define assert_param(expr) ((void)0U) +#endif /* USE_FULL_ASSERT */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_HAL_CONF_H */ + + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Inc/stm32f4xx_it.h b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Inc/stm32f4xx_it.h new file mode 100644 index 0000000000000000000000000000000000000000..7a788c296ba552fa48a9952e9d1855753879241b --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Inc/stm32f4xx_it.h @@ -0,0 +1,84 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32f4xx_it.h + * @brief This file contains the headers of the interrupt handlers. + ****************************************************************************** + * + * COPYRIGHT(c) 2018 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_IT_H +#define __STM32F4xx_IT_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Exported types ------------------------------------------------------------*/ +/* USER CODE BEGIN ET */ + +/* USER CODE END ET */ + +/* Exported constants --------------------------------------------------------*/ +/* USER CODE BEGIN EC */ + +/* USER CODE END EC */ + +/* Exported macro ------------------------------------------------------------*/ +/* USER CODE BEGIN EM */ + +/* USER CODE END EM */ + +/* Exported functions prototypes ---------------------------------------------*/ +void NMI_Handler(void); +void HardFault_Handler(void); +void MemManage_Handler(void); +void BusFault_Handler(void); +void UsageFault_Handler(void); +void SVC_Handler(void); +void DebugMon_Handler(void); +void PendSV_Handler(void); +void SysTick_Handler(void); +/* USER CODE BEGIN EFP */ + +/* USER CODE END EFP */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_IT_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/main.c b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/main.c new file mode 100644 index 0000000000000000000000000000000000000000..a4a5778d2392b8e2cc468eef010794509277c068 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/main.c @@ -0,0 +1,346 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file : main.c + * @brief : Main program body + ****************************************************************************** + ** This notice applies to any and all portions of this file + * that are not between comment pairs USER CODE BEGIN and + * USER CODE END. Other portions of this file, whether + * inserted by the user or by software development tools + * are owned by their respective copyright owners. + * + * COPYRIGHT(c) 2018 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN PTD */ + +/* USER CODE END PTD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +UART_HandleTypeDef huart3; + +PCD_HandleTypeDef hpcd_USB_OTG_FS; + +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +void SystemClock_Config(void); +static void MX_GPIO_Init(void); +static void MX_USART3_UART_Init(void); +static void MX_USB_OTG_FS_PCD_Init(void); +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/** + * @brief The application entry point. + * @retval int + */ +int main(void) +{ + /* USER CODE BEGIN 1 */ + + /* USER CODE END 1 */ + + /* MCU Configuration--------------------------------------------------------*/ + + /* Reset of all peripherals, Initializes the Flash interface and the Systick. */ + HAL_Init(); + + /* USER CODE BEGIN Init */ + + /* USER CODE END Init */ + + /* Configure the system clock */ + SystemClock_Config(); + + /* USER CODE BEGIN SysInit */ + + /* USER CODE END SysInit */ + + /* Initialize all configured peripherals */ + MX_GPIO_Init(); + MX_USART3_UART_Init(); + MX_USB_OTG_FS_PCD_Init(); + /* USER CODE BEGIN 2 */ + + /* USER CODE END 2 */ + + /* Infinite loop */ + /* USER CODE BEGIN WHILE */ + while (1) + { + /* USER CODE END WHILE */ + + /* USER CODE BEGIN 3 */ + } + /* USER CODE END 3 */ +} + +/** + * @brief System Clock Configuration + * @retval None + */ +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + + /**Configure the main internal regulator output voltage + */ + __HAL_RCC_PWR_CLK_ENABLE(); + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + /**Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 8; + RCC_OscInitStruct.PLL.PLLN = 384; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; + RCC_OscInitStruct.PLL.PLLQ = 8; + RCC_OscInitStruct.PLL.PLLR = 2; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /**Initializes the CPU, AHB and APB busses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK) + { + Error_Handler(); + } + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_CLK48; + PeriphClkInitStruct.Clk48ClockSelection = RCC_CLK48CLKSOURCE_PLLQ; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } +} + +/** + * @brief USART3 Initialization Function + * @param None + * @retval None + */ +static void MX_USART3_UART_Init(void) +{ + + /* USER CODE BEGIN USART3_Init 0 */ + + /* USER CODE END USART3_Init 0 */ + + /* USER CODE BEGIN USART3_Init 1 */ + + /* USER CODE END USART3_Init 1 */ + huart3.Instance = USART3; + huart3.Init.BaudRate = 115200; + huart3.Init.WordLength = UART_WORDLENGTH_8B; + huart3.Init.StopBits = UART_STOPBITS_1; + huart3.Init.Parity = UART_PARITY_NONE; + huart3.Init.Mode = UART_MODE_TX_RX; + huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE; + huart3.Init.OverSampling = UART_OVERSAMPLING_16; + if (HAL_UART_Init(&huart3) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USART3_Init 2 */ + + /* USER CODE END USART3_Init 2 */ + +} + +/** + * @brief USB_OTG_FS Initialization Function + * @param None + * @retval None + */ +static void MX_USB_OTG_FS_PCD_Init(void) +{ + + /* USER CODE BEGIN USB_OTG_FS_Init 0 */ + + /* USER CODE END USB_OTG_FS_Init 0 */ + + /* USER CODE BEGIN USB_OTG_FS_Init 1 */ + + /* USER CODE END USB_OTG_FS_Init 1 */ + hpcd_USB_OTG_FS.Instance = USB_OTG_FS; + hpcd_USB_OTG_FS.Init.dev_endpoints = 6; + hpcd_USB_OTG_FS.Init.speed = PCD_SPEED_FULL; + hpcd_USB_OTG_FS.Init.dma_enable = DISABLE; + hpcd_USB_OTG_FS.Init.ep0_mps = DEP0CTL_MPS_64; + hpcd_USB_OTG_FS.Init.phy_itface = PCD_PHY_EMBEDDED; + hpcd_USB_OTG_FS.Init.Sof_enable = ENABLE; + hpcd_USB_OTG_FS.Init.low_power_enable = DISABLE; + hpcd_USB_OTG_FS.Init.lpm_enable = DISABLE; + hpcd_USB_OTG_FS.Init.battery_charging_enable = ENABLE; + hpcd_USB_OTG_FS.Init.vbus_sensing_enable = ENABLE; + hpcd_USB_OTG_FS.Init.use_dedicated_ep1 = DISABLE; + if (HAL_PCD_Init(&hpcd_USB_OTG_FS) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN USB_OTG_FS_Init 2 */ + + /* USER CODE END USB_OTG_FS_Init 2 */ + +} + +/** + * @brief GPIO Initialization Function + * @param None + * @retval None + */ +static void MX_GPIO_Init(void) +{ + GPIO_InitTypeDef GPIO_InitStruct = {0}; + + /* GPIO Ports Clock Enable */ + __HAL_RCC_GPIOC_CLK_ENABLE(); + __HAL_RCC_GPIOH_CLK_ENABLE(); + __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOG_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(GPIOB, LD3_Pin|LD2_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(USB_PowerSwitchOn_GPIO_Port, USB_PowerSwitchOn_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin Output Level */ + HAL_GPIO_WritePin(LD1_GPIO_Port, LD1_Pin, GPIO_PIN_RESET); + + /*Configure GPIO pin : USER_Btn_Pin */ + GPIO_InitStruct.Pin = USER_Btn_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(USER_Btn_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pins : LD3_Pin LD2_Pin */ + GPIO_InitStruct.Pin = LD3_Pin|LD2_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + + /*Configure GPIO pin : USB_PowerSwitchOn_Pin */ + GPIO_InitStruct.Pin = USB_PowerSwitchOn_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(USB_PowerSwitchOn_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : USB_OverCurrent_Pin */ + GPIO_InitStruct.Pin = USB_OverCurrent_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(USB_OverCurrent_GPIO_Port, &GPIO_InitStruct); + + /*Configure GPIO pin : LD1_Pin */ + GPIO_InitStruct.Pin = LD1_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + HAL_GPIO_Init(LD1_GPIO_Port, &GPIO_InitStruct); + +} + +/* USER CODE BEGIN 4 */ + +/* USER CODE END 4 */ + +/** + * @brief This function is executed in case of error occurrence. + * @retval None + */ +void Error_Handler(void) +{ + /* USER CODE BEGIN Error_Handler_Debug */ + /* User can add his own implementation to report the HAL error return state */ + + /* USER CODE END Error_Handler_Debug */ +} + +#ifdef USE_FULL_ASSERT +/** + * @brief Reports the name of the source file and the source line number + * where the assert_param error has occurred. + * @param file: pointer to the source file name + * @param line: assert_param error line source number + * @retval None + */ +void assert_failed(uint8_t *file, uint32_t line) +{ + /* USER CODE BEGIN 6 */ + /* User can add his own implementation to report the file name and line number, + tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ + /* USER CODE END 6 */ +} +#endif /* USE_FULL_ASSERT */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c new file mode 100644 index 0000000000000000000000000000000000000000..2ffd0b8ed57facffdb7157d5e65b5d7a01755c6a --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_hal_msp.c @@ -0,0 +1,252 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * File Name : stm32f4xx_hal_msp.c + * Description : This file provides code for the MSP Initialization + * and de-Initialization codes. + ****************************************************************************** + ** This notice applies to any and all portions of this file + * that are not between comment pairs USER CODE BEGIN and + * USER CODE END. Other portions of this file, whether + * inserted by the user or by software development tools + * are owned by their respective copyright owners. + * + * COPYRIGHT(c) 2018 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN Define */ + +/* USER CODE END Define */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN Macro */ + +/* USER CODE END Macro */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* External functions --------------------------------------------------------*/ +/* USER CODE BEGIN ExternalFunctions */ + +/* USER CODE END ExternalFunctions */ + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ +/** + * Initializes the Global MSP. + */ +void HAL_MspInit(void) +{ + /* USER CODE BEGIN MspInit 0 */ + + /* USER CODE END MspInit 0 */ + + __HAL_RCC_SYSCFG_CLK_ENABLE(); + __HAL_RCC_PWR_CLK_ENABLE(); + + /* System interrupt init*/ + + /* USER CODE BEGIN MspInit 1 */ + + /* USER CODE END MspInit 1 */ +} + +/** +* @brief UART MSP Initialization +* This function configures the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ +void HAL_UART_MspInit(UART_HandleTypeDef* huart) +{ + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(huart->Instance==USART3) + { + /* USER CODE BEGIN USART3_MspInit 0 */ + + /* USER CODE END USART3_MspInit 0 */ + /* Peripheral clock enable */ + __HAL_RCC_USART3_CLK_ENABLE(); + + __HAL_RCC_GPIOD_CLK_ENABLE(); + /**USART3 GPIO Configuration + PD8 ------> USART3_TX + PD9 ------> USART3_RX + */ + GPIO_InitStruct.Pin = STLK_RX_Pin|STLK_TX_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_PULLUP; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF7_USART3; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + + /* USER CODE BEGIN USART3_MspInit 1 */ + + /* USER CODE END USART3_MspInit 1 */ + } + +} + +/** +* @brief UART MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param huart: UART handle pointer +* @retval None +*/ + +void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) +{ + + if(huart->Instance==USART3) + { + /* USER CODE BEGIN USART3_MspDeInit 0 */ + + /* USER CODE END USART3_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USART3_CLK_DISABLE(); + + /**USART3 GPIO Configuration + PD8 ------> USART3_TX + PD9 ------> USART3_RX + */ + HAL_GPIO_DeInit(GPIOD, STLK_RX_Pin|STLK_TX_Pin); + + /* USER CODE BEGIN USART3_MspDeInit 1 */ + + /* USER CODE END USART3_MspDeInit 1 */ + } + +} + +/** +* @brief PCD MSP Initialization +* This function configures the hardware resources used in this example +* @param hpcd: PCD handle pointer +* @retval None +*/ +void HAL_PCD_MspInit(PCD_HandleTypeDef* hpcd) +{ + + GPIO_InitTypeDef GPIO_InitStruct = {0}; + if(hpcd->Instance==USB_OTG_FS) + { + /* USER CODE BEGIN USB_OTG_FS_MspInit 0 */ + + /* USER CODE END USB_OTG_FS_MspInit 0 */ + + __HAL_RCC_GPIOA_CLK_ENABLE(); + /**USB_OTG_FS GPIO Configuration + PA8 ------> USB_OTG_FS_SOF + PA9 ------> USB_OTG_FS_VBUS + PA10 ------> USB_OTG_FS_ID + PA11 ------> USB_OTG_FS_DM + PA12 ------> USB_OTG_FS_DP + */ + GPIO_InitStruct.Pin = USB_SOF_Pin|USB_ID_Pin|USB_DM_Pin|USB_DP_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH; + GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + + GPIO_InitStruct.Pin = USB_VBUS_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_INPUT; + GPIO_InitStruct.Pull = GPIO_NOPULL; + HAL_GPIO_Init(USB_VBUS_GPIO_Port, &GPIO_InitStruct); + + /* Peripheral clock enable */ + __HAL_RCC_USB_OTG_FS_CLK_ENABLE(); + /* USER CODE BEGIN USB_OTG_FS_MspInit 1 */ + + /* USER CODE END USB_OTG_FS_MspInit 1 */ + } + +} + +/** +* @brief PCD MSP De-Initialization +* This function freeze the hardware resources used in this example +* @param hpcd: PCD handle pointer +* @retval None +*/ + +void HAL_PCD_MspDeInit(PCD_HandleTypeDef* hpcd) +{ + + if(hpcd->Instance==USB_OTG_FS) + { + /* USER CODE BEGIN USB_OTG_FS_MspDeInit 0 */ + + /* USER CODE END USB_OTG_FS_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_USB_OTG_FS_CLK_DISABLE(); + + /**USB_OTG_FS GPIO Configuration + PA8 ------> USB_OTG_FS_SOF + PA9 ------> USB_OTG_FS_VBUS + PA10 ------> USB_OTG_FS_ID + PA11 ------> USB_OTG_FS_DM + PA12 ------> USB_OTG_FS_DP + */ + HAL_GPIO_DeInit(GPIOA, USB_SOF_Pin|USB_VBUS_Pin|USB_ID_Pin|USB_DM_Pin + |USB_DP_Pin); + + /* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */ + + /* USER CODE END USB_OTG_FS_MspDeInit 1 */ + } + +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_it.c b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_it.c new file mode 100644 index 0000000000000000000000000000000000000000..5973f7fddba5d7cba87469b84c7300ad38b65be4 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/stm32f4xx_it.c @@ -0,0 +1,217 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file stm32f4xx_it.c + * @brief Interrupt Service Routines. + ****************************************************************************** + * + * COPYRIGHT(c) 2018 STMicroelectronics + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ +/* USER CODE END Header */ + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" +#include "stm32f4xx_it.h" +/* Private includes ----------------------------------------------------------*/ +/* USER CODE BEGIN Includes */ +/* USER CODE END Includes */ + +/* Private typedef -----------------------------------------------------------*/ +/* USER CODE BEGIN TD */ + +/* USER CODE END TD */ + +/* Private define ------------------------------------------------------------*/ +/* USER CODE BEGIN PD */ + +/* USER CODE END PD */ + +/* Private macro -------------------------------------------------------------*/ +/* USER CODE BEGIN PM */ + +/* USER CODE END PM */ + +/* Private variables ---------------------------------------------------------*/ +/* USER CODE BEGIN PV */ + +/* USER CODE END PV */ + +/* Private function prototypes -----------------------------------------------*/ +/* USER CODE BEGIN PFP */ + +/* USER CODE END PFP */ + +/* Private user code ---------------------------------------------------------*/ +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +/* External variables --------------------------------------------------------*/ +/* USER CODE BEGIN EV */ + +/* USER CODE END EV */ + +/******************************************************************************/ +/* Cortex-M4 Processor Interruption and Exception Handlers */ +/******************************************************************************/ +/** + * @brief This function handles Non maskable interrupt. + */ +void NMI_Handler(void) +{ + /* USER CODE BEGIN NonMaskableInt_IRQn 0 */ + + /* USER CODE END NonMaskableInt_IRQn 0 */ + /* USER CODE BEGIN NonMaskableInt_IRQn 1 */ + + /* USER CODE END NonMaskableInt_IRQn 1 */ +} + +/** + * @brief This function handles Hard fault interrupt. + */ +void HardFault_Handler(void) +{ + /* USER CODE BEGIN HardFault_IRQn 0 */ + + /* USER CODE END HardFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_HardFault_IRQn 0 */ + /* USER CODE END W1_HardFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Memory management fault. + */ +void MemManage_Handler(void) +{ + /* USER CODE BEGIN MemoryManagement_IRQn 0 */ + + /* USER CODE END MemoryManagement_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_MemoryManagement_IRQn 0 */ + /* USER CODE END W1_MemoryManagement_IRQn 0 */ + } +} + +/** + * @brief This function handles Pre-fetch fault, memory access fault. + */ +void BusFault_Handler(void) +{ + /* USER CODE BEGIN BusFault_IRQn 0 */ + + /* USER CODE END BusFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_BusFault_IRQn 0 */ + /* USER CODE END W1_BusFault_IRQn 0 */ + } +} + +/** + * @brief This function handles Undefined instruction or illegal state. + */ +void UsageFault_Handler(void) +{ + /* USER CODE BEGIN UsageFault_IRQn 0 */ + + /* USER CODE END UsageFault_IRQn 0 */ + while (1) + { + /* USER CODE BEGIN W1_UsageFault_IRQn 0 */ + /* USER CODE END W1_UsageFault_IRQn 0 */ + } +} + +/** + * @brief This function handles System service call via SWI instruction. + */ +void SVC_Handler(void) +{ + /* USER CODE BEGIN SVCall_IRQn 0 */ + + /* USER CODE END SVCall_IRQn 0 */ + /* USER CODE BEGIN SVCall_IRQn 1 */ + + /* USER CODE END SVCall_IRQn 1 */ +} + +/** + * @brief This function handles Debug monitor. + */ +void DebugMon_Handler(void) +{ + /* USER CODE BEGIN DebugMonitor_IRQn 0 */ + + /* USER CODE END DebugMonitor_IRQn 0 */ + /* USER CODE BEGIN DebugMonitor_IRQn 1 */ + + /* USER CODE END DebugMonitor_IRQn 1 */ +} + +/** + * @brief This function handles Pendable request for system service. + */ +void PendSV_Handler(void) +{ + /* USER CODE BEGIN PendSV_IRQn 0 */ + + /* USER CODE END PendSV_IRQn 0 */ + /* USER CODE BEGIN PendSV_IRQn 1 */ + + /* USER CODE END PendSV_IRQn 1 */ +} + +/** + * @brief This function handles System tick timer. + */ +void SysTick_Handler(void) +{ + /* USER CODE BEGIN SysTick_IRQn 0 */ + + /* USER CODE END SysTick_IRQn 0 */ + HAL_IncTick(); + /* USER CODE BEGIN SysTick_IRQn 1 */ + + /* USER CODE END SysTick_IRQn 1 */ +} + +/******************************************************************************/ +/* STM32F4xx Peripheral Interrupt Handlers */ +/* Add here the Interrupt Handlers for the used peripherals. */ +/* For the available peripheral interrupt handler names, */ +/* please refer to the startup file (startup_stm32f4xx.s). */ +/******************************************************************************/ + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/system_stm32f4xx.c b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/system_stm32f4xx.c new file mode 100644 index 0000000000000000000000000000000000000000..14204ed5e7f3c50afbaabd1cc6c760ebd17bf261 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/CubeMX_Config/Src/system_stm32f4xx.c @@ -0,0 +1,761 @@ +/** + ****************************************************************************** + * @file system_stm32f4xx.c + * @author MCD Application Team + * @version V2.4.3 + * @date 22-January-2016 + * @brief CMSIS Cortex-M4 Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f4xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f4xx_system + * @{ + */ + +/** @addtogroup STM32F4xx_System_Private_Includes + * @{ + */ + + +#include "stm32f4xx.h" + +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ +#endif /* HSI_VALUE */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Defines + * @{ + */ + +/************************* Miscellaneous Configuration ************************/ +/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\ + || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F469xx) || defined(STM32F479xx) +/* #define DATA_IN_ExtSRAM */ +#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) +/* #define DATA_IN_ExtSDRAM */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx ||\ + STM32F479xx */ + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/******************************************************************************/ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ + uint32_t SystemCoreClock = 16000000; +const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes + * @{ + */ + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + +/** + * @} + */ + +/** @addtogroup STM32F4xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the FPU setting, vector table location and External memory + * configuration. + * @param None + * @retval None + */ +void SystemInit(void) +{ + /* FPU settings ------------------------------------------------------------*/ + #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) + SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ + #endif + /* Reset the RCC clock configuration to the default reset state ------------*/ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset CFGR register */ + RCC->CFGR = 0x00000000; + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset PLLCFGR register */ + RCC->PLLCFGR = 0x24003010; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Disable all interrupts */ + RCC->CIR = 0x00000000; + +#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) + SystemInit_ExtMemCtl(); +#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ + + /* Configure the Vector Table location add offset address ------------------*/ +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value + * depends on the application requirements), user has to ensure that HSE_VALUE + * is same as the real frequency of the crystal used. Otherwise, this function + * may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * + * @param None + * @retval None + */ +void SystemCoreClockUpdate(void) +{ + uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock source */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock source */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock source */ + + /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N + SYSCLK = PLL_VCO / PLL_P + */ + pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; + pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; + + if (pllsource != 0) + { + /* HSE used as PLL clock source */ + pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + else + { + /* HSI used as PLL clock source */ + pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); + } + + pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; + SystemCoreClock = pllvco/pllp; + break; + default: + SystemCoreClock = HSI_VALUE; + break; + } + /* Compute HCLK frequency --------------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK frequency */ + SystemCoreClock >>= tmp; +} + +#if defined (DATA_IN_ExtSRAM) && defined (DATA_IN_ExtSDRAM) +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ + defined(STM32F469xx) || defined(STM32F479xx) +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f4xx.s before jump to main. + * This function configures the external memories (SRAM/SDRAM) + * This SRAM/SDRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ + __IO uint32_t tmp = 0x00; + + register uint32_t tmpreg = 0, timeout = 0xFFFF; + register uint32_t index; + + /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */ + RCC->AHB1ENR |= 0x000001F8; + + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN); + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x00CCC0CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A8A; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xFFFF0FCF; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00CC0CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA828A; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xFFFFC3CF; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0xCCCCCCCC; + GPIOF->AFR[1] = 0xCCCCCCCC; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA800AAA; + /* Configure PFx pins speed to 50 MHz */ + GPIOF->OSPEEDR = 0xAA800AAA; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0xCCCCCCCC; + GPIOG->AFR[1] = 0xCCCCCCCC; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0xAAAAAAAA; + /* Configure PGx pins speed to 50 MHz */ + GPIOG->OSPEEDR = 0xAAAAAAAA; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + + /* Connect PHx pins to FMC Alternate function */ + GPIOH->AFR[0] = 0x00C0CC00; + GPIOH->AFR[1] = 0xCCCCCCCC; + /* Configure PHx pins in Alternate function mode */ + GPIOH->MODER = 0xAAAA08A0; + /* Configure PHx pins speed to 50 MHz */ + GPIOH->OSPEEDR = 0xAAAA08A0; + /* Configure PHx pins Output type to push-pull */ + GPIOH->OTYPER = 0x00000000; + /* No pull-up, pull-down for PHx pins */ + GPIOH->PUPDR = 0x00000000; + + /* Connect PIx pins to FMC Alternate function */ + GPIOI->AFR[0] = 0xCCCCCCCC; + GPIOI->AFR[1] = 0x00000CC0; + /* Configure PIx pins in Alternate function mode */ + GPIOI->MODER = 0x0028AAAA; + /* Configure PIx pins speed to 50 MHz */ + GPIOI->OSPEEDR = 0x0028AAAA; + /* Configure PIx pins Output type to push-pull */ + GPIOI->OTYPER = 0x00000000; + /* No pull-up, pull-down for PIx pins */ + GPIOI->PUPDR = 0x00000000; + +/*-- FMC Configuration -------------------------------------------------------*/ + /* Enable the FMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + + FMC_Bank5_6->SDCR[0] = 0x000019E4; + FMC_Bank5_6->SDTR[0] = 0x01115351; + + /* SDRAM initialization sequence */ + /* Clock enable command */ + FMC_Bank5_6->SDCMR = 0x00000011; + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Delay */ + for (index = 0; index<1000; index++); + + /* PALL command */ + FMC_Bank5_6->SDCMR = 0x00000012; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Auto refresh command */ + FMC_Bank5_6->SDCMR = 0x00000073; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* MRD register program */ + FMC_Bank5_6->SDCMR = 0x00046014; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Set refresh count */ + tmpreg = FMC_Bank5_6->SDRTR; + FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1)); + + /* Disable write protection */ + tmpreg = FMC_Bank5_6->SDCR[0]; + FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001011; + FMC_Bank1->BTCR[3] = 0x00000201; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ +#if defined(STM32F469xx) || defined(STM32F479xx) + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001091; + FMC_Bank1->BTCR[3] = 0x00110212; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F469xx || STM32F479xx */ + + (void)(tmp); +} +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ +#elif defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f4xx.s before jump to main. + * This function configures the external memories (SRAM/SDRAM) + * This SRAM/SDRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ + __IO uint32_t tmp = 0x00; +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F446xx) || defined(STM32F469xx) || defined(STM32F479xx) +#if defined (DATA_IN_ExtSDRAM) + register uint32_t tmpreg = 0, timeout = 0xFFFF; + register uint32_t index; + +#if defined(STM32F446xx) + /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface + clock */ + RCC->AHB1ENR |= 0x0000007D; +#else + /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface + clock */ + RCC->AHB1ENR |= 0x000001F8; +#endif /* STM32F446xx */ + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN); + +#if defined(STM32F446xx) + /* Connect PAx pins to FMC Alternate function */ + GPIOA->AFR[0] |= 0xC0000000; + GPIOA->AFR[1] |= 0x00000000; + /* Configure PDx pins in Alternate function mode */ + GPIOA->MODER |= 0x00008000; + /* Configure PDx pins speed to 50 MHz */ + GPIOA->OSPEEDR |= 0x00008000; + /* Configure PDx pins Output type to push-pull */ + GPIOA->OTYPER |= 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOA->PUPDR |= 0x00000000; + + /* Connect PCx pins to FMC Alternate function */ + GPIOC->AFR[0] |= 0x00CC0000; + GPIOC->AFR[1] |= 0x00000000; + /* Configure PDx pins in Alternate function mode */ + GPIOC->MODER |= 0x00000A00; + /* Configure PDx pins speed to 50 MHz */ + GPIOC->OSPEEDR |= 0x00000A00; + /* Configure PDx pins Output type to push-pull */ + GPIOC->OTYPER |= 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOC->PUPDR |= 0x00000000; +#endif /* STM32F446xx */ + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x000000CC; + GPIOD->AFR[1] = 0xCC000CCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xA02A000A; + /* Configure PDx pins speed to 50 MHz */ + GPIOD->OSPEEDR = 0xA02A000A; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00000CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA800A; + /* Configure PEx pins speed to 50 MHz */ + GPIOE->OSPEEDR = 0xAAAA800A; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0xCCCCCCCC; + GPIOF->AFR[1] = 0xCCCCCCCC; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA800AAA; + /* Configure PFx pins speed to 50 MHz */ + GPIOF->OSPEEDR = 0xAA800AAA; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0xCCCCCCCC; + GPIOG->AFR[1] = 0xCCCCCCCC; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0xAAAAAAAA; + /* Configure PGx pins speed to 50 MHz */ + GPIOG->OSPEEDR = 0xAAAAAAAA; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F469xx) || defined(STM32F479xx) + /* Connect PHx pins to FMC Alternate function */ + GPIOH->AFR[0] = 0x00C0CC00; + GPIOH->AFR[1] = 0xCCCCCCCC; + /* Configure PHx pins in Alternate function mode */ + GPIOH->MODER = 0xAAAA08A0; + /* Configure PHx pins speed to 50 MHz */ + GPIOH->OSPEEDR = 0xAAAA08A0; + /* Configure PHx pins Output type to push-pull */ + GPIOH->OTYPER = 0x00000000; + /* No pull-up, pull-down for PHx pins */ + GPIOH->PUPDR = 0x00000000; + + /* Connect PIx pins to FMC Alternate function */ + GPIOI->AFR[0] = 0xCCCCCCCC; + GPIOI->AFR[1] = 0x00000CC0; + /* Configure PIx pins in Alternate function mode */ + GPIOI->MODER = 0x0028AAAA; + /* Configure PIx pins speed to 50 MHz */ + GPIOI->OSPEEDR = 0x0028AAAA; + /* Configure PIx pins Output type to push-pull */ + GPIOI->OTYPER = 0x00000000; + /* No pull-up, pull-down for PIx pins */ + GPIOI->PUPDR = 0x00000000; +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + +/*-- FMC Configuration -------------------------------------------------------*/ + /* Enable the FMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + + /* Configure and enable SDRAM bank1 */ +#if defined(STM32F446xx) + FMC_Bank5_6->SDCR[0] = 0x00001954; +#else + FMC_Bank5_6->SDCR[0] = 0x000019E4; +#endif /* STM32F446xx */ + FMC_Bank5_6->SDTR[0] = 0x01115351; + + /* SDRAM initialization sequence */ + /* Clock enable command */ + FMC_Bank5_6->SDCMR = 0x00000011; + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Delay */ + for (index = 0; index<1000; index++); + + /* PALL command */ + FMC_Bank5_6->SDCMR = 0x00000012; + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Auto refresh command */ +#if defined(STM32F446xx) + FMC_Bank5_6->SDCMR = 0x000000F3; +#else + FMC_Bank5_6->SDCMR = 0x00000073; +#endif /* STM32F446xx */ + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* MRD register program */ +#if defined(STM32F446xx) + FMC_Bank5_6->SDCMR = 0x00044014; +#else + FMC_Bank5_6->SDCMR = 0x00046014; +#endif /* STM32F446xx */ + timeout = 0xFFFF; + while((tmpreg != 0) && (timeout-- > 0)) + { + tmpreg = FMC_Bank5_6->SDSR & 0x00000020; + } + + /* Set refresh count */ + tmpreg = FMC_Bank5_6->SDRTR; +#if defined(STM32F446xx) + FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1)); +#else + FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1)); +#endif /* STM32F446xx */ + + /* Disable write protection */ + tmpreg = FMC_Bank5_6->SDCR[0]; + FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); +#endif /* DATA_IN_ExtSDRAM */ +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx || STM32F469xx || STM32F479xx */ + +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\ + || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)\ + || defined(STM32F469xx) || defined(STM32F479xx) + +#if defined(DATA_IN_ExtSRAM) +/*-- GPIOs Configuration -----------------------------------------------------*/ + /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ + RCC->AHB1ENR |= 0x00000078; + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN); + + /* Connect PDx pins to FMC Alternate function */ + GPIOD->AFR[0] = 0x00CCC0CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A8A; + /* Configure PDx pins speed to 100 MHz */ + GPIOD->OSPEEDR = 0xFFFF0FCF; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FMC Alternate function */ + GPIOE->AFR[0] = 0xC00CC0CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA828A; + /* Configure PEx pins speed to 100 MHz */ + GPIOE->OSPEEDR = 0xFFFFC3CF; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCC0000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA000AAA; + /* Configure PFx pins speed to 100 MHz */ + GPIOF->OSPEEDR = 0xFF000FFF; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FMC Alternate function */ + GPIOG->AFR[0] = 0x00CCCCCC; + GPIOG->AFR[1] = 0x000000C0; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x00085AAA; + /* Configure PGx pins speed to 100 MHz */ + GPIOG->OSPEEDR = 0x000CAFFF; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + +/*-- FMC/FSMC Configuration --------------------------------------------------*/ + /* Enable the FMC/FSMC interface clock */ + RCC->AHB3ENR |= 0x00000001; + +#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001011; + FMC_Bank1->BTCR[3] = 0x00000201; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ +#if defined(STM32F469xx) || defined(STM32F479xx) + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); + /* Configure and enable Bank1_SRAM2 */ + FMC_Bank1->BTCR[2] = 0x00001091; + FMC_Bank1->BTCR[3] = 0x00110212; + FMC_Bank1E->BWTR[2] = 0x0fffffff; +#endif /* STM32F469xx || STM32F479xx */ +#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) + /* Delay after an RCC peripheral clock enabling */ + tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN); + /* Configure and enable Bank1_SRAM2 */ + FSMC_Bank1->BTCR[2] = 0x00001011; + FSMC_Bank1->BTCR[3] = 0x00000201; + FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF; +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ + +#endif /* DATA_IN_ExtSRAM */ +#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\ + STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */ + (void)(tmp); +} +#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */ +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f412-st-nucleo/board/Kconfig b/bsp/stm32/stm32f412-st-nucleo/board/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..48b789dd3ac29e7e82d5686159eccd69938169f7 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/Kconfig @@ -0,0 +1,60 @@ +menu "Hardware Drivers Config" + +config SOC_STM32F412ZG + bool + select SOC_SERIES_STM32F4 + select RT_USING_COMPONENTS_INIT + select RT_USING_USER_MAIN + default y + + +menu "Onboard Peripheral Drivers" + + config BSP_USING_STLINK_TO_USART + bool "Enable STLINK TO USART (uart3)" + select BSP_USING_UART + select BSP_USING_UART3 + default y + +endmenu + +menu "On-chip Peripheral Drivers" + + config BSP_USING_GPIO + bool "Enable GPIO" + select RT_USING_PIN + default y + + menuconfig BSP_USING_UART + bool "Enable UART" + default y + select RT_USING_SERIAL + if BSP_USING_UART + config BSP_USING_UART2 + bool "Enable UART2" + default y + config BSP_UART2_RX_USING_DMA + bool "Enable UART2 RX DMA" + depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA + default n + + config BSP_USING_UART3 + bool "Enable UART3" + default y + config BSP_UART3_RX_USING_DMA + bool "Enable UART3 RX DMA" + depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA + default n + endif + + config BSP_USING_ON_CHIP_FLASH + bool "Enable on-chip FLASH" + default n + +endmenu + +menu "Board extended module Drivers" + +endmenu + +endmenu diff --git a/bsp/stm32/stm32f412-st-nucleo/board/SConscript b/bsp/stm32/stm32f412-st-nucleo/board/SConscript new file mode 100644 index 0000000000000000000000000000000000000000..4cc635133f053300b55b78ab69faeea9c13fd068 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/SConscript @@ -0,0 +1,37 @@ +import os +import rtconfig +from building import * + +Import('SDK_LIB') + +cwd = GetCurrentDir() + +# add general drivers +src = Split(''' +board.c +CubeMX_Config/Src/stm32f4xx_hal_msp.c +''') + +path = [cwd] +path += [cwd + '/CubeMX_Config/Inc'] + +startup_path_prefix = SDK_LIB + +if rtconfig.CROSS_TOOL == 'gcc': + src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/startup_stm32f412zx.s'] +elif rtconfig.CROSS_TOOL == 'keil': + src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/arm/startup_stm32f412zx.s'] +elif rtconfig.CROSS_TOOL == 'iar': + src += [startup_path_prefix + '/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/iar/startup_stm32f412zx.s'] + +# STM32F405xx) || STM32F415xx) || STM32F407xx) || STM32F417xx) +# STM32F427xx) || STM32F437xx) || STM32F429xx) || STM32F439xx) +# STM32F401xC) || STM32F401xE) || STM32F410Tx) || STM32F410Cx) +# STM32F410Rx) || STM32F411xE) || STM32F446xx) || STM32F469xx) +# STM32F479xx) || STM32F412Cx) || STM32F412Rx) || STM32F412Vx) +# STM32F412Zx) || STM32F413xx) || STM32F423xx) +# You can select chips from the list above +CPPDEFINES = ['STM32F412Zx'] +group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES) + +Return('group') \ No newline at end of file diff --git a/bsp/stm32/stm32f412-st-nucleo/board/board.c b/bsp/stm32/stm32f412-st-nucleo/board/board.c new file mode 100644 index 0000000000000000000000000000000000000000..504407b161c97b2681390bc4ac40911c687adee7 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/board.c @@ -0,0 +1,57 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-06 SummerGift first version + */ + +#include "board.h" + +void SystemClock_Config(void) +{ + RCC_OscInitTypeDef RCC_OscInitStruct = {0}; + RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + + /**Configure the main internal regulator output voltage + */ + __HAL_RCC_PWR_CLK_ENABLE(); + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + /**Initializes the CPU, AHB and APB busses clocks + */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLM = 8; + RCC_OscInitStruct.PLL.PLLN = 384; + RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; + RCC_OscInitStruct.PLL.PLLQ = 8; + RCC_OscInitStruct.PLL.PLLR = 2; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + Error_Handler(); + } + /**Initializes the CPU, AHB and APB busses clocks + */ + RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK + |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2; + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2; + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; + + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK) + { + Error_Handler(); + } + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_CLK48; + PeriphClkInitStruct.Clk48ClockSelection = RCC_CLK48CLKSOURCE_PLLQ; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) + { + Error_Handler(); + } +} diff --git a/bsp/stm32/stm32f412-st-nucleo/board/board.h b/bsp/stm32/stm32f412-st-nucleo/board/board.h new file mode 100644 index 0000000000000000000000000000000000000000..3e2d7384c8b958644e16b2ee8aa3b6aaf0844dfb --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/board.h @@ -0,0 +1,50 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-5 SummerGift first version + */ + +#ifndef __BOARD_H__ +#define __BOARD_H__ + +#include +#include +#include "drv_common.h" +#include "drv_gpio.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define STM32_FLASH_START_ADRESS ((uint32_t)0x08000000) +#define STM32_FLASH_SIZE (1024 * 1024) +#define STM32_FLASH_END_ADDRESS ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE)) + +#define STM32_SRAM_SIZE 256 +#define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024) + +#if defined(__CC_ARM) || defined(__CLANG_ARM) +extern int Image$$RW_IRAM1$$ZI$$Limit; +#define HEAP_BEGIN (&Image$$RW_IRAM1$$ZI$$Limit) +#elif __ICCARM__ +#pragma section="CSTACK" +#define HEAP_BEGIN (__segment_end("CSTACK")) +#else +extern int __bss_end; +#define HEAP_BEGIN (&__bss_end) +#endif + +#define HEAP_END STM32_SRAM_END + +void SystemClock_Config(void); + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/bsp/stm32/stm32f412-st-nucleo/board/linker_scripts/link.icf b/bsp/stm32/stm32f412-st-nucleo/board/linker_scripts/link.icf new file mode 100644 index 0000000000000000000000000000000000000000..42be32ad3b27ee72b52b632004a059f374c94fd3 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/linker_scripts/link.icf @@ -0,0 +1,28 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x080FFFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2003FFFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x0400; +define symbol __ICFEDIT_size_heap__ = 0x0000; +/**** End of ICF editor section. ###ICF###*/ + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, last block CSTACK}; \ No newline at end of file diff --git a/bsp/stm32/stm32f412-st-nucleo/board/linker_scripts/link.lds b/bsp/stm32/stm32f412-st-nucleo/board/linker_scripts/link.lds new file mode 100644 index 0000000000000000000000000000000000000000..9fe40737088f1be4d241d04c59435650fd072667 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/linker_scripts/link.lds @@ -0,0 +1,144 @@ +/* + * linker script for STM32F4xx with GNU ld + * bernard.xiong 2009-10-14 + */ + +/* Program Entry, set to mark it as "used" and avoid gc */ +MEMORY +{ + ROM (rx) : ORIGIN = 0x08000000, LENGTH = 1024k /* 1024KB flash */ + RAM (rw) : ORIGIN = 0x20000000, LENGTH = 256k /* 256K sram */ +} +ENTRY(Reset_Handler) +_system_stack_size = 0x200; + +SECTIONS +{ + .text : + { + . = ALIGN(4); + _stext = .; + KEEP(*(.isr_vector)) /* Startup code */ + + . = ALIGN(4); + *(.text) /* remaining code */ + *(.text.*) /* remaining code */ + *(.rodata) /* read-only data (constants) */ + *(.rodata*) + *(.glue_7) + *(.glue_7t) + *(.gnu.linkonce.t*) + + /* section information for finsh shell */ + . = ALIGN(4); + __fsymtab_start = .; + KEEP(*(FSymTab)) + __fsymtab_end = .; + + . = ALIGN(4); + __vsymtab_start = .; + KEEP(*(VSymTab)) + __vsymtab_end = .; + + /* section information for initial. */ + . = ALIGN(4); + __rt_init_start = .; + KEEP(*(SORT(.rti_fn*))) + __rt_init_end = .; + + . = ALIGN(4); + _etext = .; + } > ROM = 0 + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + + /* This is used by the startup in order to initialize the .data secion */ + _sidata = .; + } > ROM + __exidx_end = .; + + /* .data section which is used for initialized data */ + + .data : AT (_sidata) + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _sdata = . ; + + *(.data) + *(.data.*) + *(.gnu.linkonce.d*) + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .data secion */ + _edata = . ; + } >RAM + + .stack : + { + . = ALIGN(4); + _sstack = .; + . = . + _system_stack_size; + . = ALIGN(4); + _estack = .; + } >RAM + + __bss_start = .; + .bss : + { + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _sbss = .; + + *(.bss) + *(.bss.*) + *(COMMON) + + . = ALIGN(4); + /* This is used by the startup in order to initialize the .bss secion */ + _ebss = . ; + + *(.bss.init) + } > RAM + __bss_end = .; + + _end = .; + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + * Symbols in the DWARF debugging sections are relative to the beginning + * of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } +} diff --git a/bsp/stm32/stm32f412-st-nucleo/board/linker_scripts/link.sct b/bsp/stm32/stm32f412-st-nucleo/board/linker_scripts/link.sct new file mode 100644 index 0000000000000000000000000000000000000000..d156ce9576787cc76ca4318da1b36680b8ce0212 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/board/linker_scripts/link.sct @@ -0,0 +1,15 @@ +; ************************************************************* +; *** Scatter-Loading Description File generated by uVision *** +; ************************************************************* + +LR_IROM1 0x08000000 0x00100000 { ; load region size_region + ER_IROM1 0x08000000 0x00100000 { ; load address = execution address + *.o (RESET, +First) + *(InRoot$$Sections) + .ANY (+RO) + } + RW_IRAM1 0x20000000 0x00040000 { ; RW data + .ANY (+RW +ZI) + } +} + diff --git a/bsp/stm32/stm32f412-st-nucleo/figures/board.png b/bsp/stm32/stm32f412-st-nucleo/figures/board.png new file mode 100644 index 0000000000000000000000000000000000000000..4ae5216f941c76c972f1939e6b14f9a46db2ac6f Binary files /dev/null and b/bsp/stm32/stm32f412-st-nucleo/figures/board.png differ diff --git a/bsp/stm32/stm32f412-st-nucleo/project.ewd b/bsp/stm32/stm32f412-st-nucleo/project.ewd new file mode 100644 index 0000000000000000000000000000000000000000..2841d18c7c33d7b665b5f2ba60b7fa83218eeb32 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/project.ewd @@ -0,0 +1,2834 @@ + + + 3 + + rtthread + + ARM + + 1 + + C-SPY + 2 + + 29 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 1 + + + + + + + + CADI_ID + 2 + + 0 + 1 + 1 + + + + + + + + + CMSISDAP_ID + 2 + + 4 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 1 + + + + + + + + + + + IJET_ID + 2 + + 8 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 16 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 1 + + + + + + + + + + PEMICRO_ID + 2 + + 3 + 1 + 1 + + + + + + + + STLINK_ID + 2 + + 4 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 1 + + + + + + + + TIFET_ID + 2 + + 1 + 1 + 1 + + + + + + + + + + + + + + + + + + + XDS100_ID + 2 + + 6 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin + 0 + + + + + Release + + ARM + + 0 + + C-SPY + 2 + + 29 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ARMSIM_ID + 2 + + 1 + 1 + 0 + + + + + + + + CADI_ID + 2 + + 0 + 1 + 0 + + + + + + + + + CMSISDAP_ID + 2 + + 4 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + GDBSERVER_ID + 2 + + 0 + 1 + 0 + + + + + + + + + + + IJET_ID + 2 + + 8 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + JLINK_ID + 2 + + 16 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + LMIFTDI_ID + 2 + + 2 + 1 + 0 + + + + + + + + + + PEMICRO_ID + 2 + + 3 + 1 + 0 + + + + + + + + STLINK_ID + 2 + + 4 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + THIRDPARTY_ID + 2 + + 0 + 1 + 0 + + + + + + + + TIFET_ID + 2 + + 1 + 1 + 0 + + + + + + + + + + + + + + + + + + + XDS100_ID + 2 + + 6 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin + 0 + + + $TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin + 0 + + + $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin + 1 + + + $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin + 0 + + + $EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin + 0 + + + + diff --git a/bsp/stm32/stm32f412-st-nucleo/project.ewp b/bsp/stm32/stm32f412-st-nucleo/project.ewp new file mode 100644 index 0000000000000000000000000000000000000000..5e5c07765dca9d9d2c0cacea27d19123458764b0 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/project.ewp @@ -0,0 +1,2299 @@ + + 3 + + rtthread + + ARM + + 1 + + General + 3 + + 31 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 35 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 22 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Release + + ARM + + 0 + + General + 3 + + 31 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 35 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 0 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 22 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 0 + + + + + + + BILINK + 0 + + + + + Kernel + + $PROJ_DIR$\..\..\..\src\clock.c + + + $PROJ_DIR$\..\..\..\src\components.c + + + $PROJ_DIR$\..\..\..\src\device.c + + + $PROJ_DIR$\..\..\..\src\idle.c + + + $PROJ_DIR$\..\..\..\src\ipc.c + + + $PROJ_DIR$\..\..\..\src\irq.c + + + $PROJ_DIR$\..\..\..\src\kservice.c + + + $PROJ_DIR$\..\..\..\src\mem.c + + + $PROJ_DIR$\..\..\..\src\mempool.c + + + $PROJ_DIR$\..\..\..\src\object.c + + + $PROJ_DIR$\..\..\..\src\scheduler.c + + + $PROJ_DIR$\..\..\..\src\signal.c + + + $PROJ_DIR$\..\..\..\src\thread.c + + + $PROJ_DIR$\..\..\..\src\timer.c + + + + Applications + + $PROJ_DIR$\applications\main.c + + + + Drivers + + $PROJ_DIR$\board\board.c + + + $PROJ_DIR$\board\CubeMX_Config\Src\stm32f4xx_hal_msp.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\iar\startup_stm32f412zx.s + + + $PROJ_DIR$\..\libraries\HAL_Drivers\drv_gpio.c + + + $PROJ_DIR$\..\libraries\HAL_Drivers\drv_usart.c + + + $PROJ_DIR$\..\libraries\HAL_Drivers\drv_common.c + + + + cpu + + $PROJ_DIR$\..\..\..\libcpu\arm\common\backtrace.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\common\div0.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\common\showmem.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\cpuport.c + + + $PROJ_DIR$\..\..\..\libcpu\arm\cortex-m4\context_iar.S + + + + DeviceDrivers + + $PROJ_DIR$\..\..\..\components\drivers\misc\pin.c + + + $PROJ_DIR$\..\..\..\components\drivers\serial\serial.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\completion.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\dataqueue.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\pipe.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\ringblk_buf.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\ringbuffer.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\waitqueue.c + + + $PROJ_DIR$\..\..\..\components\drivers\src\workqueue.c + + + + finsh + + $PROJ_DIR$\..\..\..\components\finsh\shell.c + + + $PROJ_DIR$\..\..\..\components\finsh\cmd.c + + + $PROJ_DIR$\..\..\..\components\finsh\msh.c + + + + libc + + $PROJ_DIR$\..\..\..\components\libc\compilers\common\time.c + + + + STM32_HAL + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c + + + $PROJ_DIR$\..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c + + + diff --git a/bsp/stm32/stm32f412-st-nucleo/project.eww b/bsp/stm32/stm32f412-st-nucleo/project.eww new file mode 100644 index 0000000000000000000000000000000000000000..c2cb02eb1e89d73e24183274c1c886ddf74f9537 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/project.eww @@ -0,0 +1,10 @@ + + + + + $WS_DIR$\project.ewp + + + + + diff --git a/bsp/stm32/stm32f412-st-nucleo/project.uvoptx b/bsp/stm32/stm32f412-st-nucleo/project.uvoptx new file mode 100644 index 0000000000000000000000000000000000000000..b79ecd4b84fd1dca5418b8b240ced89426d63d2f --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/project.uvoptx @@ -0,0 +1,192 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rtthread + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\keil\List\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 0 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 6 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32F4xx_1024 -FL0100000 -FS08000000 -FP0($$Device:STM32F412ZGTx$CMSIS\Flash\STM32F4xx_1024.FLM) + + + 0 + ST-LINKIII-KEIL_SWO + -U0675FF495252717267215046 -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_512.FLM -FS08000000 -FL080000 -FP0($$Device:STM32F411RETx$CMSIS\Flash\STM32F4xx_512.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + 1 + 0 + 0 + 2 + 10000000 + + + + + + Source Group 1 + 0 + 0 + 0 + 0 + + + diff --git a/bsp/stm32/stm32f412-st-nucleo/project.uvprojx b/bsp/stm32/stm32f412-st-nucleo/project.uvprojx new file mode 100644 index 0000000000000000000000000000000000000000..301bb1038b0e4a1279299a4b2a8f65be8095ab69 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/project.uvprojx @@ -0,0 +1,803 @@ + + + 2.1 +
### uVision Project, (C) Keil Software
+ + + rtthread + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + STM32F412ZGTx + STMicroelectronics + Keil.STM32F4xx_DFP.2.13.0 + http://www.keil.com/pack + IRAM(0x20000000,0x00040000) IROM(0x08000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F412ZGTx$CMSIS\Flash\STM32F4xx_1024.FLM)) + 0 + $$Device:STM32F412ZGTx$Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h + + + + + + + + + + $$Device:STM32F412ZGTx$CMSIS\SVD\STM32F412xG.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\keil\Obj\ + rtthread + 1 + 0 + 0 + 1 + 0 + .\build\keil\List\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 0 + 0 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x40000 + + + 1 + 0x8000000 + 0x100000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x100000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x40000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + 0 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + USE_HAL_DRIVER, STM32F412Zx + + .;..\..\..\include;applications;.;board;board\CubeMX_Config\Inc;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\libcpu\arm\common;..\..\..\libcpu\arm\cortex-m4;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\..\..\components\libc\compilers\common;..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Inc;..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Include;..\libraries\STM32F4xx_HAL\CMSIS\Include + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + Kernel + + + clock.c + 1 + ..\..\..\src\clock.c + + + + + components.c + 1 + ..\..\..\src\components.c + + + + + device.c + 1 + ..\..\..\src\device.c + + + + + idle.c + 1 + ..\..\..\src\idle.c + + + + + ipc.c + 1 + ..\..\..\src\ipc.c + + + + + irq.c + 1 + ..\..\..\src\irq.c + + + + + kservice.c + 1 + ..\..\..\src\kservice.c + + + + + mem.c + 1 + ..\..\..\src\mem.c + + + + + mempool.c + 1 + ..\..\..\src\mempool.c + + + + + object.c + 1 + ..\..\..\src\object.c + + + + + scheduler.c + 1 + ..\..\..\src\scheduler.c + + + + + signal.c + 1 + ..\..\..\src\signal.c + + + + + thread.c + 1 + ..\..\..\src\thread.c + + + + + timer.c + 1 + ..\..\..\src\timer.c + + + + + Applications + + + main.c + 1 + applications\main.c + + + + + Drivers + + + board.c + 1 + board\board.c + + + + + stm32f4xx_hal_msp.c + 1 + board\CubeMX_Config\Src\stm32f4xx_hal_msp.c + + + + + startup_stm32f412zx.s + 2 + ..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\arm\startup_stm32f412zx.s + + + + + drv_gpio.c + 1 + ..\libraries\HAL_Drivers\drv_gpio.c + + + + + drv_usart.c + 1 + ..\libraries\HAL_Drivers\drv_usart.c + + + + + drv_common.c + 1 + ..\libraries\HAL_Drivers\drv_common.c + + + + + cpu + + + backtrace.c + 1 + ..\..\..\libcpu\arm\common\backtrace.c + + + + + div0.c + 1 + ..\..\..\libcpu\arm\common\div0.c + + + + + showmem.c + 1 + ..\..\..\libcpu\arm\common\showmem.c + + + + + cpuport.c + 1 + ..\..\..\libcpu\arm\cortex-m4\cpuport.c + + + + + context_rvds.S + 2 + ..\..\..\libcpu\arm\cortex-m4\context_rvds.S + + + + + DeviceDrivers + + + pin.c + 1 + ..\..\..\components\drivers\misc\pin.c + + + + + serial.c + 1 + ..\..\..\components\drivers\serial\serial.c + + + + + completion.c + 1 + ..\..\..\components\drivers\src\completion.c + + + + + dataqueue.c + 1 + ..\..\..\components\drivers\src\dataqueue.c + + + + + pipe.c + 1 + ..\..\..\components\drivers\src\pipe.c + + + + + ringblk_buf.c + 1 + ..\..\..\components\drivers\src\ringblk_buf.c + + + + + ringbuffer.c + 1 + ..\..\..\components\drivers\src\ringbuffer.c + + + + + waitqueue.c + 1 + ..\..\..\components\drivers\src\waitqueue.c + + + + + workqueue.c + 1 + ..\..\..\components\drivers\src\workqueue.c + + + + + finsh + + + shell.c + 1 + ..\..\..\components\finsh\shell.c + + + + + cmd.c + 1 + ..\..\..\components\finsh\cmd.c + + + + + msh.c + 1 + ..\..\..\components\finsh\msh.c + + + + + libc + + + time.c + 1 + ..\..\..\components\libc\compilers\common\time.c + + + + + STM32_HAL + + + system_stm32f4xx.c + 1 + ..\libraries\STM32F4xx_HAL\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c + + + + + stm32f4xx_hal.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c + + + + + stm32f4xx_hal_cec.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cec.c + + + + + stm32f4xx_hal_cortex.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c + + + + + stm32f4xx_hal_crc.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_crc.c + + + + + stm32f4xx_hal_cryp.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp.c + + + + + stm32f4xx_hal_cryp_ex.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cryp_ex.c + + + + + stm32f4xx_hal_dma.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c + + + + + stm32f4xx_hal_dma_ex.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c + + + + + stm32f4xx_hal_pwr.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c + + + + + stm32f4xx_hal_pwr_ex.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c + + + + + stm32f4xx_hal_rcc.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c + + + + + stm32f4xx_hal_rcc_ex.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c + + + + + stm32f4xx_hal_rng.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rng.c + + + + + stm32f4xx_hal_gpio.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c + + + + + stm32f4xx_hal_uart.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c + + + + + stm32f4xx_hal_usart.c + 1 + ..\libraries\STM32F4xx_HAL\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_usart.c + + + + + + + + + + + + diff --git a/bsp/stm32/stm32f412-st-nucleo/rtconfig.h b/bsp/stm32/stm32f412-st-nucleo/rtconfig.h new file mode 100644 index 0000000000000000000000000000000000000000..a602ec4f18dee74bd1052ee25cfb53dcbca16841 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/rtconfig.h @@ -0,0 +1,176 @@ +#ifndef RT_CONFIG_H__ +#define RT_CONFIG_H__ + +/* Automatically generated file; DO NOT EDIT. */ +/* RT-Thread Configuration */ + +/* RT-Thread Kernel */ + +#define RT_NAME_MAX 8 +#define RT_ALIGN_SIZE 4 +#define RT_THREAD_PRIORITY_32 +#define RT_THREAD_PRIORITY_MAX 32 +#define RT_TICK_PER_SECOND 1000 +#define RT_USING_OVERFLOW_CHECK +#define RT_USING_HOOK +#define RT_USING_IDLE_HOOK +#define RT_IDLE_HOOK_LIST_SIZE 4 +#define IDLE_THREAD_STACK_SIZE 256 +#define RT_DEBUG + +/* Inter-Thread communication */ + +#define RT_USING_SEMAPHORE +#define RT_USING_MUTEX +#define RT_USING_EVENT +#define RT_USING_MAILBOX +#define RT_USING_MESSAGEQUEUE + +/* Memory Management */ + +#define RT_USING_MEMPOOL +#define RT_USING_SMALL_MEM +#define RT_USING_HEAP + +/* Kernel Device Object */ + +#define RT_USING_DEVICE +#define RT_USING_CONSOLE +#define RT_CONSOLEBUF_SIZE 128 +#define RT_CONSOLE_DEVICE_NAME "uart3" +#define RT_VER_NUM 0x40002 +#define ARCH_ARM +#define RT_USING_CPU_FFS +#define ARCH_ARM_CORTEX_M +#define ARCH_ARM_CORTEX_M4 + +/* RT-Thread Components */ + +#define RT_USING_COMPONENTS_INIT +#define RT_USING_USER_MAIN +#define RT_MAIN_THREAD_STACK_SIZE 2048 +#define RT_MAIN_THREAD_PRIORITY 10 + +/* C++ features */ + + +/* Command shell */ + +#define RT_USING_FINSH +#define FINSH_THREAD_NAME "tshell" +#define FINSH_USING_HISTORY +#define FINSH_HISTORY_LINES 5 +#define FINSH_USING_SYMTAB +#define FINSH_USING_DESCRIPTION +#define FINSH_THREAD_PRIORITY 20 +#define FINSH_THREAD_STACK_SIZE 4096 +#define FINSH_CMD_SIZE 80 +#define FINSH_USING_MSH +#define FINSH_USING_MSH_DEFAULT +#define FINSH_USING_MSH_ONLY +#define FINSH_ARG_MAX 10 + +/* Device virtual file system */ + + +/* Device Drivers */ + +#define RT_USING_DEVICE_IPC +#define RT_PIPE_BUFSZ 512 +#define RT_USING_SERIAL +#define RT_SERIAL_RB_BUFSZ 64 +#define RT_USING_PIN + +/* Using USB */ + + +/* POSIX layer and C standard library */ + +#define RT_LIBC_USING_TIME + +/* Network */ + +/* Socket abstraction layer */ + + +/* Network interface device */ + + +/* light weight TCP/IP stack */ + + +/* AT commands */ + + +/* VBUS(Virtual Software BUS) */ + + +/* Utilities */ + + +/* RT-Thread online packages */ + +/* IoT - internet of things */ + + +/* Wi-Fi */ + +/* Marvell WiFi */ + + +/* Wiced WiFi */ + + +/* IoT Cloud */ + + +/* security packages */ + + +/* language packages */ + + +/* multimedia packages */ + + +/* tools packages */ + + +/* system packages */ + + +/* peripheral libraries and drivers */ + + +/* miscellaneous packages */ + + +/* samples: kernel and components samples */ + + +/* Privated Packages of RealThread */ + + +/* Network Utilities */ + +#define SOC_FAMILY_STM32 +#define SOC_SERIES_STM32F4 + +/* Hardware Drivers Config */ + +#define SOC_STM32F412ZG + +/* Onboard Peripheral Drivers */ + +#define BSP_USING_STLINK_TO_USART + +/* On-chip Peripheral Drivers */ + +#define BSP_USING_GPIO +#define BSP_USING_UART +#define BSP_USING_UART3 + +/* Board extended module Drivers */ + + +#endif diff --git a/bsp/stm32/stm32f412-st-nucleo/rtconfig.py b/bsp/stm32/stm32f412-st-nucleo/rtconfig.py new file mode 100644 index 0000000000000000000000000000000000000000..40b84ad8465b1764de898817be5fa27c6852de2e --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/rtconfig.py @@ -0,0 +1,144 @@ +import os + +# toolchains options +ARCH='arm' +CPU='cortex-m4' +CROSS_TOOL='gcc' + +# bsp lib config +BSP_LIBRARY_TYPE = None + +if os.getenv('RTT_CC'): + CROSS_TOOL = os.getenv('RTT_CC') +if os.getenv('RTT_ROOT'): + RTT_ROOT = os.getenv('RTT_ROOT') + +# cross_tool provides the cross compiler +# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR +if CROSS_TOOL == 'gcc': + PLATFORM = 'gcc' + EXEC_PATH = r'C:\Users\XXYYZZ' +elif CROSS_TOOL == 'keil': + PLATFORM = 'armcc' + EXEC_PATH = r'C:/Keil_v5' +elif CROSS_TOOL == 'iar': + PLATFORM = 'iar' + EXEC_PATH = r'C:/Program Files (x86)/IAR Systems/Embedded Workbench 8.0' + +if os.getenv('RTT_EXEC_PATH'): + EXEC_PATH = os.getenv('RTT_EXEC_PATH') + +BUILD = 'debug' + +if PLATFORM == 'gcc': + # toolchains + PREFIX = 'arm-none-eabi-' + CC = PREFIX + 'gcc' + AS = PREFIX + 'gcc' + AR = PREFIX + 'ar' + CXX = PREFIX + 'g++' + LINK = PREFIX + 'gcc' + TARGET_EXT = 'elf' + SIZE = PREFIX + 'size' + OBJDUMP = PREFIX + 'objdump' + OBJCPY = PREFIX + 'objcopy' + + DEVICE = ' -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard -ffunction-sections -fdata-sections' + CFLAGS = DEVICE + ' -Dgcc' + AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp -Wa,-mimplicit-it=thumb ' + LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rt-thread.map,-cref,-u,Reset_Handler -T board/linker_scripts/link.lds' + + CPATH = '' + LPATH = '' + + if BUILD == 'debug': + CFLAGS += ' -O0 -gdwarf-2 -g' + AFLAGS += ' -gdwarf-2' + else: + CFLAGS += ' -O2' + + CXXFLAGS = CFLAGS + + POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n' + +elif PLATFORM == 'armcc': + # toolchains + CC = 'armcc' + CXX = 'armcc' + AS = 'armasm' + AR = 'armar' + LINK = 'armlink' + TARGET_EXT = 'axf' + + DEVICE = ' --cpu Cortex-M4.fp ' + CFLAGS = '-c ' + DEVICE + ' --apcs=interwork --c99' + AFLAGS = DEVICE + ' --apcs=interwork ' + LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rt-thread.map --strict --scatter "board\linker_scripts\link.sct"' + CFLAGS += ' -I' + EXEC_PATH + '/ARM/ARMCC/include' + LFLAGS += ' --libpath=' + EXEC_PATH + '/ARM/ARMCC/lib' + + CFLAGS += ' -D__MICROLIB ' + AFLAGS += ' --pd "__MICROLIB SETA 1" ' + LFLAGS += ' --library_type=microlib ' + EXEC_PATH += '/ARM/ARMCC/bin/' + + if BUILD == 'debug': + CFLAGS += ' -g -O0' + AFLAGS += ' -g' + else: + CFLAGS += ' -O2' + + + CXXFLAGS = CFLAGS + CFLAGS += ' -std=c99' + + POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET' + +elif PLATFORM == 'iar': + # toolchains + CC = 'iccarm' + CXX = 'iccarm' + AS = 'iasmarm' + AR = 'iarchive' + LINK = 'ilinkarm' + TARGET_EXT = 'out' + + DEVICE = '-Dewarm' + + CFLAGS = DEVICE + CFLAGS += ' --diag_suppress Pa050' + CFLAGS += ' --no_cse' + CFLAGS += ' --no_unroll' + CFLAGS += ' --no_inline' + CFLAGS += ' --no_code_motion' + CFLAGS += ' --no_tbaa' + CFLAGS += ' --no_clustering' + CFLAGS += ' --no_scheduling' + CFLAGS += ' --endian=little' + CFLAGS += ' --cpu=Cortex-M4' + CFLAGS += ' -e' + CFLAGS += ' --fpu=VFPv4_sp' + CFLAGS += ' --dlib_config "' + EXEC_PATH + '/arm/INC/c/DLib_Config_Normal.h"' + CFLAGS += ' --silent' + + AFLAGS = DEVICE + AFLAGS += ' -s+' + AFLAGS += ' -w+' + AFLAGS += ' -r' + AFLAGS += ' --cpu Cortex-M4' + AFLAGS += ' --fpu VFPv4_sp' + AFLAGS += ' -S' + + if BUILD == 'debug': + CFLAGS += ' --debug' + CFLAGS += ' -On' + else: + CFLAGS += ' -Oh' + + LFLAGS = ' --config "board/linker_scripts/link.icf"' + LFLAGS += ' --entry __iar_program_start' + + CXXFLAGS = CFLAGS + + EXEC_PATH = EXEC_PATH + '/arm/bin/' + POST_ACTION = 'ielftool --bin $TARGET rtthread.bin' diff --git a/bsp/stm32/stm32f412-st-nucleo/template.ewp b/bsp/stm32/stm32f412-st-nucleo/template.ewp new file mode 100644 index 0000000000000000000000000000000000000000..a76e3d65a878112e5a1eeef6b75417235abfdd17 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/template.ewp @@ -0,0 +1,2074 @@ + + + 3 + + rtthread + + ARM + + 1 + + General + 3 + + 31 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 35 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 1 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 22 + 1 + 1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 1 + + + + + + + BILINK + 0 + + + + + Release + + ARM + + 0 + + General + 3 + + 31 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ICCARM + 2 + + 35 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + AARM + 2 + + 10 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + OBJCOPY + 0 + + 1 + 1 + 0 + + + + + + + + + CUSTOM + 3 + + + + 0 + + + + BICOMP + 0 + + + + BUILDACTION + 1 + + + + + + + ILINK + 0 + + 22 + 1 + 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + IARCHIVE + 0 + + 0 + 1 + 0 + + + + + + + BILINK + 0 + + + + diff --git a/bsp/stm32/stm32f412-st-nucleo/template.eww b/bsp/stm32/stm32f412-st-nucleo/template.eww new file mode 100644 index 0000000000000000000000000000000000000000..bd036bb4c98c1598f04b85f64b0dff37f6ec6028 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/template.eww @@ -0,0 +1,10 @@ + + + + + $WS_DIR$\template.ewp + + + + + diff --git a/bsp/stm32/stm32f412-st-nucleo/template.uvoptx b/bsp/stm32/stm32f412-st-nucleo/template.uvoptx new file mode 100644 index 0000000000000000000000000000000000000000..b79ecd4b84fd1dca5418b8b240ced89426d63d2f --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/template.uvoptx @@ -0,0 +1,192 @@ + + + + 1.0 + +
### uVision Project, (C) Keil Software
+ + + *.c + *.s*; *.src; *.a* + *.obj; *.o + *.lib + *.txt; *.h; *.inc + *.plm + *.cpp + 0 + + + + 0 + 0 + + + + rtthread + 0x4 + ARM-ADS + + 12000000 + + 1 + 1 + 0 + 1 + 0 + + + 1 + 65535 + 0 + 0 + 0 + + + 79 + 66 + 8 + .\build\keil\List\ + + + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 0 + 0 + 0 + 0 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + + + 0 + 0 + 1 + + 18 + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 6 + + + + + + + + + + + STLink\ST-LINKIII-KEIL_SWO.dll + + + + 0 + UL2CM3 + UL2CM3(-S0 -C0 -P0 ) -FN1 -FC1000 -FD20000000 -FF0STM32F4xx_1024 -FL0100000 -FS08000000 -FP0($$Device:STM32F412ZGTx$CMSIS\Flash\STM32F4xx_1024.FLM) + + + 0 + ST-LINKIII-KEIL_SWO + -U0675FF495252717267215046 -O206 -SF4000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P2 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_512.FLM -FS08000000 -FL080000 -FP0($$Device:STM32F411RETx$CMSIS\Flash\STM32F4xx_512.FLM) + + + + + 0 + + + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + 0 + 0 + 0 + + + + + + + + + + 1 + 0 + 0 + 2 + 10000000 + + + + + + Source Group 1 + 0 + 0 + 0 + 0 + + + diff --git a/bsp/stm32/stm32f412-st-nucleo/template.uvprojx b/bsp/stm32/stm32f412-st-nucleo/template.uvprojx new file mode 100644 index 0000000000000000000000000000000000000000..03ef7a5a75d9250a359cc31de502e7b3a97d3c14 --- /dev/null +++ b/bsp/stm32/stm32f412-st-nucleo/template.uvprojx @@ -0,0 +1,395 @@ + + + + 2.1 + +
### uVision Project, (C) Keil Software
+ + + + rtthread + 0x4 + ARM-ADS + 5060750::V5.06 update 6 (build 750)::ARMCC + 0 + + + STM32F412ZGTx + STMicroelectronics + Keil.STM32F4xx_DFP.2.13.0 + http://www.keil.com/pack + IRAM(0x20000000,0x00040000) IROM(0x08000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(12000000) ELITTLE + + + UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000 -FP0($$Device:STM32F412ZGTx$CMSIS\Flash\STM32F4xx_1024.FLM)) + 0 + $$Device:STM32F412ZGTx$Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h + + + + + + + + + + $$Device:STM32F412ZGTx$CMSIS\SVD\STM32F412xG.svd + 0 + 0 + + + + + + + 0 + 0 + 0 + 0 + 1 + + .\build\keil\Obj\ + rtthread + 1 + 0 + 0 + 1 + 0 + .\build\keil\List\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 1 + 0 + fromelf --bin !L --output rtthread.bin + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + -REMAP -MPU + DCM.DLL + -pCM4 + SARMCM3.DLL + -MPU + TCM.DLL + -pCM4 + + + + 1 + 0 + 0 + 0 + 16 + + + + + 1 + 0 + 0 + 1 + 1 + 4096 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M4" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 2 + 0 + 0 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x40000 + + + 1 + 0x8000000 + 0x100000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x100000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x40000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + 0 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 0 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + .\board\linker_scripts\link.sct + + + + + + + + + + + Source Group 1 + + + + + + + + + + + +