- 25 1月, 2011 1 次提交
-
-
由 Nobuhiro Iwamatsu 提交于
Renamed platform_register_device to platform_device_register. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 13 1月, 2011 2 次提交
-
-
由 Magnus Damm 提交于
Add probe support for the sh7372 SH4AL-DSP core. The most common use case for this is when the system boots from the ARM core in the sh7372 and uses the SH core for application offload as a slave CPU. May also be used to boot the sh7372 from the SH core. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Len Brown 提交于
set but not checked. Signed-off-by: NLen Brown <len.brown@intel.com>
-
- 12 1月, 2011 5 次提交
-
-
由 Magnus Damm 提交于
This patch enables interrupt generation for SDIO IRQs of the SDHI block on the sh7366 processor. Use together with a recent SDHI driver using TMIO_MMC_SDIO_IRQ and with the MMC_CAP_SDIO_IRQ flag in the board code. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch enables interrupt generation for SDIO IRQs of the SDHI block on the sh7343 processor. Use together with a recent SDHI driver using TMIO_MMC_SDIO_IRQ and with the MMC_CAP_SDIO_IRQ flag in the board code. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Arnd Hannemann 提交于
This patch enables the interrupt generation for SDIO IRQs of the sdhi controllers of the SoC. To make sure SDIO IRQs are used announce the MMC_CAP_SDIO_IRQ capability on ap325rxa. Signed-off-by: NArnd Hannemann <arnd@arndnet.de> Acked-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Arnd Hannemann 提交于
This patch enables the interrupt generation for SDIO IRQs of the sdhi controllers of the SoC. To make sure SDIO IRQs are used, announce the MMC_CAP_SDIO_IRQ capability on migor. Signed-off-by: NArnd Hannemann <arnd@arndnet.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Arnd Hannemann 提交于
This patch enables the interrupt generation for SDIO IRQs of the sdhi controllers of the SoC. To make sure interrupt are handled announce the MMC_CAP_SDIO_IRQ capability on ecovec, kfr2r09 and se7724. Tested with a b43-based SDIO wireless card on ecovec. Signed-off-by: NArnd Hannemann <arnd@arndnet.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 11 1月, 2011 1 次提交
-
-
由 Yoshihiro Shimoda 提交于
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 24 12月, 2010 2 次提交
-
-
由 Paul Mundt 提交于
The master clock initialization for SH7201 was wholly bogus. Users of the legacy API must initialize the clock rate through the struct clk itself rather than returning the clock frequency. Given that the init function itself is void, returning the frequency isn't terribly effective. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Some of the SH4-202 code was overlooked in the set_rate() API conversion, resulting in: arch/sh/kernel/cpu/sh4/clock-sh4-202.c: error: too many arguments to function 'clk->ops->set_rate' Fix it up. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 29 11月, 2010 1 次提交
-
-
由 Kuninori Morimoto 提交于
Current clk_ops doesn't support .init which is used to select external clock on ecovec without CONFIG_SH_CLK_CPG_LEGACY. To solve this problem, this patch add div6_reparent_clks to clock-sh7724. This patch solve compile error too. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 26 11月, 2010 2 次提交
-
-
由 Peter Zijlstra 提交于
The perf hardware pmu got initialized at various points in the boot, some before early_initcall() some after (notably arch_initcall). The problem is that the NMI lockup detector is ran from early_initcall() and expects the hardware pmu to be present. Sanitize this by moving all architecture hardware pmu implementations to initialize at early_initcall() and move the lockup detector to an explicit initcall right after that. Cc: paulus <paulus@samba.org> Cc: davem <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1290707759.2145.119.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
factorise some generic infrastructure to assist looking up struct clks for the ARM & SH architecture. as the code is identical at 99% put the arch specific code for allocation as example in asm/clkdev.h Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 11月, 2010 1 次提交
-
-
由 Lionel Debroux 提交于
While at it, fix two checkpatch errors. Several non-const struct instances constified by this patch were added after the introduction of platform_suspend_ops in checkpatch.pl's list of "should be const" structs (79404849). Patch against mainline. Inspired by hunks of the grsecurity patch, updated for newer kernels. Signed-off-by: NLionel Debroux <lionel_debroux@yahoo.fr> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 15 11月, 2010 1 次提交
-
-
由 Paul Mundt 提交于
Now that clk_set_rate_ex() is gone, there is also no way to get at rate setting algo id, which is now also completely unused. Kill it off before new clock ops start using it. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 09 11月, 2010 2 次提交
-
-
由 Paul Mundt 提交于
Presently this is all inlined in setup.c, which is not really the place for it. Follow the x86 example and split it out into its own file. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This kills off the hardcoded SH_CLK_MD introduced by the SH-2 boards and converts over to the mode pin API. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 08 11月, 2010 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
These clocks are currently only used inside one .c file and are not declared in any headers, therefore having them global is useless. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 02 11月, 2010 1 次提交
-
-
由 Paul Mundt 提交于
This adds in the platform device for SH7786 USB EHCI. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 27 10月, 2010 4 次提交
-
-
由 Paul Mundt 提交于
op_name_from_perf_id() currently returns a local variable, which isn't terribly productive. As we only handle a single PMU case for now, simply allocate and free the string from the arch init/exit context and have op_name_from_perf_id() hand back the cached string. This also takes UTS_MACHINE in to account, given that we build for multiple architectures. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 26 10月, 2010 2 次提交
-
-
由 Thomas Gleixner 提交于
Switch over to the new allocator functions. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
CPUs can be in either the legacy 29-bit or 32-bit physical addressing modes. This follows the x86 approach of tracking the phys bits in cpuinfo and exposing it to userspace through procfs. This change was requested to permit kexec-tools to detect the physical addressing mode in order to determine the appropriate address mangling. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 13 10月, 2010 1 次提交
-
-
由 Paul Mundt 提交于
The PMCAT location has conveniently moved on newer SH-X3 parts, special case this for now with a note. This will probably want to be redone in a less visually offensive way when/if more information becomes available. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 05 10月, 2010 1 次提交
-
-
由 Paul Mundt 提交于
SH7786 is the big user for subgroup splitting, mostly for the PCIe block, but those will follow later. For now we simply split up SCIF1, as used by the serial console on SDK7786 and others. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 04 10月, 2010 1 次提交
-
-
由 Paul Mundt 提交于
The gpio sysfs support needs to get at these later, so drop the __initdata annotations. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 02 10月, 2010 4 次提交
-
-
由 Paul Mundt 提交于
Some controllers will need to be initialized lazily due to pinmux constraints, while others may simply have no need to be brought online if there are no backing devices for them attached. In this case it's still necessary to be able to reserve their hardware vector map before dynamic IRQs get a hold of them. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
The SH-X3 proto CPU has all of the external IRQ and IRL pins muxed, make sure that we're able to grab them before attempting to register their respective IRQ controllers. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This adds in support for GPIO/pinmux on the SH-X3 proto CPUs. This will subsequently be used by the x3proto board. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This adds in hardware IRQ auto-distribution support for SH-X3 proto CPUs, following the SH7786 support. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 01 10月, 2010 2 次提交
-
-
由 Paul Mundt 提交于
This shuffles some of the shared bits out of the 7786 code and in to a shared SH-X3 support file. Presently just for userimask, but also a good place for the IRQ balancing wrappers. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Rewrite the SH-X3 proto CPU clock framework for clkdev. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 19 9月, 2010 1 次提交
-
-
由 Guennadi Liakhovetski 提交于
Recent ASoC changes unified all PCM names, fix the platform code to match. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 8月, 2010 1 次提交
-
-
由 Phil Edworthy 提交于
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 06 7月, 2010 3 次提交
-
-
由 Yoshihiro Shimoda 提交于
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoshihiro Shimoda 提交于
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Yoshihiro Shimoda 提交于
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-