- 27 5月, 2009 23 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: avoid back to back on_each_cpu in cpa_flush_array x86, relocs: ignore R_386_NONE in kernel relocation entries
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Add support for VGA load detection (pre-945). drm/i915: Use an I2C algo to do the flip to SDVO DDC bus. drm/i915: Determine type before initialising connector drm/i915: Return SDVO LVDS VBT mode if no EDID modes are detected. drm/i915: Fetch SDVO LVDS mode lines from VBT, then reserve them i915: support 8xx desktop cursors drm/i915: allocate large pointer arrays with vmalloc
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: oprofile: fix cpu buffer size
-
由 Pallipadi, Venkatesh 提交于
Cleanup cpa_flush_array() to avoid back to back on_each_cpu() calls. [ Impact: optimizes fix 0af48f42 ] Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6由 Linus Torvalds 提交于
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFSv4: Fix the case where NFSv4 renewal fails nfs: fix build error in nfsroot with initconst XPRTRDMA: fix client rpcrdma FRMR registration on mlx4 devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add missing check of pin vref 50 and others in Realtek codecs ALSA: hda - Add 5stack-no-fp model for STAC927x ALSA: hda - Add forced codec-slots for ASUS W5Fm
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] powernow-k8: determine exact CPU frequency for HW Pstates [CPUFREQ] powernow-k8 cleanup msg if BIOS does not export ACPI _PSS cpufreq data [CPUFREQ] fix timer teardown in ondemand governor [CPUFREQ] fix timer teardown in conservative governor [CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call [CPUFREQ] powernow-k7 build fix when ACPI=n [CPUFREQ] add atom family to p4-clockmod
-
由 Rusty Russell 提交于
When KVM is loaded, and hence VT set up, the vmcall instruction in an lguest guest causes a #GP, not #UD. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tetsuo Handa 提交于
call_usermodehelper_setup() forgot to kfree(sub_info) when prepare_usermodehelper_creds() failed. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) r8169: avoid losing MSI interrupts tcp: tcp_vegas ssthresh bugfix mac8390: fix regression caused during net_device_ops conversion gianfar: fix BUG under load after introduction of skb recycling wimax/i2400m: usb: fix device reset on autosuspend while not yet idle RxRPC: Error handling for rxrpc_alloc_connection() ipv4: Fix oops with FIB_TRIE pktgen: do not access flows[] beyond its length gigaset: beyond ARRAY_SIZE of iwb->data IPv6: set RTPROT_KERNEL to initial route net: fix rtable leak in net/ipv4/route.c net: fix length computation in rt_check_expire() wireless: beyond ARRAY_SIZE of intf->crypto_stats iwlwifi: update 5000 ucode support to version 2 of API cfg80211: fix race between core hint and driver's custom apply airo: fix airo_get_encode{,ext} buffer overflow like I mean it... ath5k: fix interpolation with equal power levels iwlwifi: do not cancel delayed work inside spin_lock_irqsave ath5k: fix exp off-by-one when computing OFDM delta slope wext: verify buffer size for SIOCSIWENCODEEXT ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/mm: Fix broken MMU PID stealing on !SMP
-
git://neil.brown.name/md由 Linus Torvalds 提交于
* 'for-linus' of git://neil.brown.name/md: md: don't use locked_ioctl. md: don't update curr_resync_completed without also updating reshape_position. md: raid5: avoid sector values going negative when testing reshape progress. md: export 'frozen' resync state through sysfs md: bitmap: improve bitmap maintenance code. md: improve errno return when setting array_size md: always update level / chunk_size / layout when writing v1.x metadata.
-
由 Trond Myklebust 提交于
If the asynchronous lease renewal fails (usually due to a soft timeout), then we _must_ schedule state recovery in order to ensure that we don't lose the lease unnecessarily or, if the lease is already lost, that we recover the locking state promptly... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Sam Ravnborg 提交于
fix build error with latest kbuild adjustments to initconst. The commit a447c093 ("vfs: Use const for kernel parser table") changed: static match_table_t __initdata tokens = { to static match_table_t __initconst tokens = { But the missing const causes popwerpc to fail with latest updates to __initconst like this: fs/nfs/nfsroot.c:400: error: __setup_str_nfs_root_setup causes a section type conflict fs/nfs/nfsroot.c:400: error: __setup_str_nfs_root_setup causes a section type conflict The bug is only present with kbuild-next. Following patch has been build tested. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Vu Pham 提交于
mlx4/connectX FRMR requires local write enable together with remote rdma write enable. This fixes NFS/RDMA operation over the ConnectX Infiniband HCA in the default memreg mode. Signed-off-by: NVu Pham <vu@mellanox.com> Signed-off-by: NTom Talpey <tmtalpey@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Ma Ling 提交于
Two approaches for VGA detections: hot plug detection for 945G onwards and load pipe detection for Pre-945G. Load pipe detection will get one free pipe, set border color as red and blue, then check CRT status by swf register. This is a sync-up with the 2D driver. Signed-off-by: NMa Ling <ling.ma@intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Andreas Herrmann 提交于
Slightly modified by trenn@suse.de -> only do this on fam 10h and fam 11h. Currently powernow-k8 determines CPU frequency from ACPI PSS objects, but according to AMD family 11h BKDG this frequency is just a rounded value: "CoreFreq (MHz) = The CPU COF specified by MSRC001_00[6B:64][CpuFid] rounded to the nearest 100 Mhz." As a consequnce powernow-k8 reports wrong CPU frequency on some systems, e.g. on Turion X2 Ultra: powernow-k8: Found 1 AMD Turion(tm)X2 Ultra DualCore Mobile ZM-82 processors (2 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (2200 MHz) powernow-k8: 1 : pstate 1 (1100 MHz) powernow-k8: 2 : pstate 2 (600 MHz) But this is wrong as frequency for Pstate2 is 550 MHz. x86info reports it correctly: #x86info -a |grep Pstate ... Pstate-0: fid=e, did=0, vid=24 (2200MHz) Pstate-1: fid=e, did=1, vid=30 (1100MHz) Pstate-2: fid=e, did=2, vid=3c (550MHz) (current) Solution is to determine the frequency directly from Pstate MSRs instead of using rounded values from ACPI table. Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: NThomas Renninger <trenn@suse.de> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Thomas Renninger 提交于
- Make the message shorter and easier to grep for - Use printk_once instead of WARN_ONCE (functionality of these was mixed) Signed-off-by: NThomas Renninger <trenn@suse.de> Cc: Langsdorf, Mark <mark.langsdorf@amd.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Mathieu Desnoyers 提交于
* Rafael J. Wysocki (rjw@sisk.pl) wrote: > This message has been generated automatically as a part of a report > of regressions introduced between 2.6.28 and 2.6.29. > > The following bug entry is on the current list of known regressions > introduced between 2.6.28 and 2.6.29. Please verify if it still should > be listed and let me know (either way). > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13186 > Subject : cpufreq timer teardown problem > Submitter : Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> > Date : 2009-04-23 14:00 (24 days old) > References : http://marc.info/?l=linux-kernel&m=124049523515036&w=4 > Handled-By : Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> > Patch : http://patchwork.kernel.org/patch/19754/ > http://patchwork.kernel.org/patch/19753/ > (updated changelog) cpufreq fix timer teardown in ondemand governor The problem is that dbs_timer_exit() uses cancel_delayed_work() when it should use cancel_delayed_work_sync(). cancel_delayed_work() does not wait for the workqueue handler to exit. The ondemand governor does not seem to be affected because the "if (!dbs_info->enable)" check at the beginning of the workqueue handler returns immediately without rescheduling the work. The conservative governor in 2.6.30-rc has the same check as the ondemand governor, which makes things usually run smoothly. However, if the governor is quickly stopped and then started, this could lead to the following race : dbs_enable could be reenabled and multiple do_dbs_timer handlers would run. This is why a synchronized teardown is required. The following patch applies to, at least, 2.6.28.x, 2.6.29.1, 2.6.30-rc2. Depends on patch cpufreq: remove rwsem lock from CPUFREQ_GOV_STOP call Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> CC: Andrew Morton <akpm@linux-foundation.org> CC: gregkh@suse.de CC: stable@kernel.org CC: cpufreq@vger.kernel.org CC: Ingo Molnar <mingo@elte.hu> CC: rjw@sisk.pl CC: Ben Slusky <sluskyb@paranoiacs.org> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Mathieu Desnoyers 提交于
* Rafael J. Wysocki (rjw@sisk.pl) wrote: > This message has been generated automatically as a part of a report > of regressions introduced between 2.6.28 and 2.6.29. > > The following bug entry is on the current list of known regressions > introduced between 2.6.28 and 2.6.29. Please verify if it still should > be listed and let me know (either way). > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13186 > Subject : cpufreq timer teardown problem > Submitter : Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> > Date : 2009-04-23 14:00 (24 days old) > References : http://marc.info/?l=linux-kernel&m=124049523515036&w=4 > Handled-By : Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> > Patch : http://patchwork.kernel.org/patch/19754/ > http://patchwork.kernel.org/patch/19753/ > (re-send with updated changelog) cpufreq fix timer teardown in conservative governor The problem is that dbs_timer_exit() uses cancel_delayed_work() when it should use cancel_delayed_work_sync(). cancel_delayed_work() does not wait for the workqueue handler to exit. The ondemand governor does not seem to be affected because the "if (!dbs_info->enable)" check at the beginning of the workqueue handler returns immediately without rescheduling the work. The conservative governor in 2.6.30-rc has the same check as the ondemand governor, which makes things usually run smoothly. However, if the governor is quickly stopped and then started, this could lead to the following race : dbs_enable could be reenabled and multiple do_dbs_timer handlers would run. This is why a synchronized teardown is required. Depends on patch cpufreq: remove rwsem lock from CPUFREQ_GOV_STOP call The following patch applies to 2.6.30-rc2. Stable kernels have a similar issue which should also be fixed, but the code changed between 2.6.29 and 2.6.30, so this patch only applies to 2.6.30-rc. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> CC: Andrew Morton <akpm@linux-foundation.org> CC: gregkh@suse.de CC: stable@kernel.org CC: cpufreq@vger.kernel.org CC: Ingo Molnar <mingo@elte.hu> CC: rjw@sisk.pl CC: Ben Slusky <sluskyb@paranoiacs.org> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Mathieu Desnoyers 提交于
* Rafael J. Wysocki (rjw@sisk.pl) wrote: > This message has been generated automatically as a part of a report > of regressions introduced between 2.6.28 and 2.6.29. > > The following bug entry is on the current list of known regressions > introduced between 2.6.28 and 2.6.29. Please verify if it still should > be listed and let me know (either way). > > > Bug-Entry : http://bugzilla.kernel.org/show_bug.cgi?id=13186 > Subject : cpufreq timer teardown problem > Submitter : Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> > Date : 2009-04-23 14:00 (24 days old) > References : http://marc.info/?l=linux-kernel&m=124049523515036&w=4 > Handled-By : Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> > Patch : http://patchwork.kernel.org/patch/19754/ > http://patchwork.kernel.org/patch/19753/ The patches linked above depend on the following patch to remove circular locking dependency : cpufreq: remove rwsem lock from CPUFREQ_GOV_STOP call (the following issue was faced when using cancel_delayed_work_sync() in the timer teardown (which fixes a race). * KOSAKI Motohiro (kosaki.motohiro@jp.fujitsu.com) wrote: > Hi > > my box output following warnings. > it seems regression by commit 7ccc7608b836e58fbacf65ee4f8eefa288e86fac. > > A: work -> do_dbs_timer() -> cpu_policy_rwsem > B: store() -> cpu_policy_rwsem -> cpufreq_governor_dbs() -> work > > Hrm, I think it must be due to my attempt to fix the timer teardown race in ondemand governor mixed with new locking behavior in 2.6.30-rc. The rwlock seems to be taken around the whole call to cpufreq_governor_dbs(), when it should be only taken around accesses to the locked data, and especially *not* around the call to dbs_timer_exit(). Reverting my fix attempt would put the teardown race back in place (replacing the cancel_delayed_work_sync by cancel_delayed_work). Instead, a proper fix would imply modifying this critical section : cpufreq.c: __cpufreq_remove_dev() ... if (cpufreq_driver->target) __cpufreq_governor(data, CPUFREQ_GOV_STOP); unlock_policy_rwsem_write(cpu); To make sure the __cpufreq_governor() callback is not called with rwsem held. This would allow execution of cancel_delayed_work_sync() without being nested within the rwsem. Applies on top of the 2.6.30-rc5 tree. Required to remove circular dep in teardown of both conservative and ondemande governors so they can use cancel_delayed_work_sync(). CPUFREQ_GOV_STOP does not modify the policy, therefore this locking seemed unneeded. Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca> CC: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Greg KH <greg@kroah.com> CC: Ingo Molnar <mingo@elte.hu> CC: "Rafael J. Wysocki" <rjw@sisk.pl> CC: Ben Slusky <sluskyb@paranoiacs.org> CC: Chris Wright <chrisw@sous-sol.org> CC: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Dave Jones 提交于
arch/x86/kernel/cpu/cpufreq/powernow-k7.c:172: warning: 'invalidate_entry' defined but not used Reported-by: NToralf Förster <toralf.foerster@gmx.de> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Jarod Wilson 提交于
Some atom procs don't do freq scaling (such as the atom 330 on my own littlefalls2 board). By adding the atom family here, we at least get the benefit of passive cooling in a thermal emergency. Not sure how to see that its actually helping any, but the driver does bind and claim its functioning on my atom 330. Signed-off-by: NJarod Wilson <jarod@redhat.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
- 26 5月, 2009 17 次提交
-
-
由 David Dillow 提交于
The 8169 chip only generates MSI interrupts when all enabled event sources are quiescent and one or more sources transition to active. If not all of the active events are acknowledged, or a new event becomes active while the existing ones are cleared in the handler, we will not see a new interrupt. The current interrupt handler masks off the Rx and Tx events once the NAPI handler has been scheduled, which opens a race window in which we can get another Rx or Tx event and never ACK'ing it, stopping all activity until the link is reset (ifconfig down/up). Fix this by always ACK'ing all event sources, and loop in the handler until we have all sources quiescent. Signed-off-by: NDavid Dillow <dave@thedillows.org> Tested-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tejun Heo 提交于
For relocatable 32bit kernels, boot/compressed/relocs.c processes relocation entries in the kernel image and appends it to the kernel image such that boot/compressed/head_32.S can relocate the kernel. The kernel image is one statically linked object and only uses two relocation types - R_386_PC32 and R_386_32, of the two only the latter needs massaging during kernel relocation and thus handled by relocs. R_386_PC32 is ignored and all other relocation types are considered error. When the target of a relocation resides in a discarded section, binutils doesn't throw away the relocation record but nullifies it by changing it to R_386_NONE, which unfortunately makes relocs fail. The problem was triggered by yet out-of-tree x86 stack unwind patches but given the binutils behavior, ignoring R_386_NONE is the right thing to do. The problem has been tracked down to binutils behavior by Jan Beulich. [ Impact: fix build with certain binutils by ignoring R_386_NONE ] Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Jan Beulich <JBeulich@novell.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <4A1B8150.40702@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Doug Leith 提交于
This patch fixes ssthresh accounting issues in tcp_vegas when cwnd decreases Signed-off-by: NDoug Leith <doug.leith@nuim.ie> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Finn Thain 提交于
Changeset ca17584b ("mac8390: update to net_device_ops") broke mac8390 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in mac8390.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. They seem to be of no value since COMPAT_NET_DEV_OPS is going away soon. Tested with a Kinetics EtherPort card. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hideo Saito 提交于
The recent rework of the MMU PID handling for non-hash CPUs has a subtle bug in the !SMP "optimized" variant of the PID stealing function. It clears the PID in the mm context before it calls local_flush_tlb_mm(). However, the later will not flush anything if the PID in the context is clear... Signed-off-by: NHideo Saito <hsaito.ppc@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 NeilBrown 提交于
md has no need for the BKL - it does its own locking. So md_ioctl doesn't need to be a locked_ioctl. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
In order for the metadata to always be consistent, we mustn't updated curr_resync_completed without also updating reshape_position. The reshape code updates both at the same time. However since commit 97e4f42d the common md_do_sync will sometimes update curr_resync_completed but is not in a position to update reshape_position. So if MD_RECOVERY_RESHAPE is set (indicating that a reshape is happening, so reshape_position might change), don't update curr_resync_completed in md_do_sync, leave it to the per-personality reshape code. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
As sector_t in unsigned, we cannot afford to let 'safepos' etc go negative. So replace a -= b; by a -= min(b,a); Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
The md resync engine has a 'frozen' state which ensures that no resync/recovery. This is used to avoid races. Export this state through the 'sync_action' sysfs attribute so that user-space can benefit and also avoid some races. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
The code for checking which bits in the bitmap can be cleared has 2 problems: 1/ it repeatedly takes and drops a spinlock, where it would make more sense to just hold on to it most of the time. 2/ it doesn't make use of some opportunities to skip large sections of the bitmap This patch fixes those. It will only affect CPU consumption, not correctness. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Instead of always returns EINVAL if anything goes wrong when setting the array size, add the option of E2BIG if the size requested is too large. This makes it easier for user-space to be sure what went wrong. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
We previously didn't update these fields when writing the metadata because they could never change. They can now, so we better write them. v0.90 metadata always updated these fields. Signed-off-by: NNeilBrown <neilb@suse.de>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
* 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Fix PDPTR reloading on CR4 writes KVM: Make paravirt tlb flush also reload the PAE PDPTRs
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Remove remap percpu allocator for the time being x86: cpa_flush_array wbinvd should be done on all CPUs x86: bugfix wbinvd() model check instead of family check x86: introduce noxsave boot parameter x86, setup: revert ACPI 3 E820 extended attributes support x86: DMI match for the Sony VGN-Z540N as it needs BIOS reboot
-
由 Avi Kivity 提交于
The processor is documented to reload the PDPTRs while in PAE mode if any of the CR4 bits PSE, PGE, or PAE change. Linux relies on this behaviour when zapping the low mappings of PAE kernels during boot. The code already handled changes to CR4.PAE; augment it to also notice changes to PSE and PGE. This triggered while booting an F11 PAE kernel; the futex initialization code runs before any CR3 reloads and writes to a NULL pointer; the futex subsystem ended up uninitialized, killing PI futexes and pulseaudio which uses them. Cc: stable@kernel.org Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
The paravirt tlb flush may be used not only to flush TLBs, but also to reload the four page-directory-pointer-table entries, as it is used as a replacement for reloading CR3. Change the code to do the entire CR3 reloading dance instead of simply flushing the TLB. Cc: stable@kernel.org Signed-off-by: NAvi Kivity <avi@redhat.com>