Skip to content

L
linux

Linux-御风守护者 / linux
与 Fork 源项目一致

从无法访问的项目Fork

通知 1
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 14 9月, 2010 1 次提交
  3. 12 9月, 2010 1 次提交
    • R
      PM / Hibernate: Avoid hitting OOM during preallocation of memory · 6715045d
      由 Rafael J. Wysocki 提交于 
      There is a problem in hibernate_preallocate_memory() that it calls
preallocate_image_memory() with an argument that may be greater than
the total number of available non-highmem memory pages.  If that's
the case, the OOM condition is guaranteed to trigger, which in turn
can cause significant slowdown to occur during hibernation.

To avoid that, make preallocate_image_memory() adjust its argument
before calling preallocate_image_pages(), so that the total number of
saveable non-highem pages left is not less than the minimum size of
a hibernation image.  Change hibernate_preallocate_memory() to try to
allocate from highmem if the number of pages allocated by
preallocate_image_memory() is too low.

Modify free_unnecessary_pages() to take all possible memory
allocation patterns into account.
Reported-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Tested-by: NM. Vefa Bicakci <bicave@superonline.com>
      6715045d
  5. 11 9月, 2010 1 次提交
  7. 10 9月, 2010 8 次提交
  9. 08 9月, 2010 3 次提交
  11. 09 9月, 2010 1 次提交
    • S
      tracing: Do not allow llseek to set_ftrace_filter · 9c55cb12
      由 Steven Rostedt 提交于 
      Reading the file set_ftrace_filter does three things.

1) shows whether or not filters are set for the function tracer
2) shows what functions are set for the function tracer
3) shows what triggers are set on any functions

3 is independent from 1 and 2.

The way this file currently works is that it is a state machine,
and as you read it, it may change state. But this assumption breaks
when you use lseek() on the file. The state machine gets out of sync
and the t_show() may use the wrong pointer and cause a kernel oops.

Luckily, this will only kill the app that does the lseek, but the app
dies while holding a mutex. This prevents anyone else from using the
set_ftrace_filter file (or any other function tracing file for that matter).

A real fix for this is to rewrite the code, but that is too much for
a -rc release or stable. This patch simply disables llseek on the
set_ftrace_filter() file for now, and we can do the proper fix for the
next major release.
Reported-by: NRobert Swiecki <swiecki@google.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Eugene Teo <eugene@redhat.com>
Cc: vendor-sec@lst.de
Cc: <stable@kernel.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      9c55cb12
  13. 05 9月, 2010 2 次提交
  15. 03 9月, 2010 1 次提交
  17. 01 9月, 2010 3 次提交
    • D
      lockup_detector: Sync touch_*_watchdog back to old semantics · 68d3f1d8
      由 Don Zickus 提交于 
      During my rewrite, the semantics of touch_nmi_watchdog and
touch_softlockup_watchdog changed enough to break some drivers
(mostly over preemptable regions).

These are cases where long delays on one CPU (due to
print_delay for example) can cause long delays on other
CPUs - so we must 'touch' the nmi_watchdog flag of those
other CPUs as well.

This change brings those touch_*_watchdog() functions back in line
with to how they used to work.
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Acked-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: peterz@infradead.org
Cc: fweisbec@gmail.com
LKML-Reference: <1283310009-22168-2-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      68d3f1d8
    • P
      pid: make setpgid() system call use RCU read-side critical section · 950eaaca
      由 Paul E. McKenney 提交于 
      [   23.584719]
[   23.584720] ===================================================
[   23.585059] [ INFO: suspicious rcu_dereference_check() usage. ]
[   23.585176] ---------------------------------------------------
[   23.585176] kernel/pid.c:419 invoked rcu_dereference_check() without protection!
[   23.585176]
[   23.585176] other info that might help us debug this:
[   23.585176]
[   23.585176]
[   23.585176] rcu_scheduler_active = 1, debug_locks = 1
[   23.585176] 1 lock held by rc.sysinit/728:
[   23.585176]  #0:  (tasklist_lock){.+.+..}, at: [<ffffffff8104771f>] sys_setpgid+0x5f/0x193
[   23.585176]
[   23.585176] stack backtrace:
[   23.585176] Pid: 728, comm: rc.sysinit Not tainted 2.6.36-rc2 #2
[   23.585176] Call Trace:
[   23.585176]  [<ffffffff8105b436>] lockdep_rcu_dereference+0x99/0xa2
[   23.585176]  [<ffffffff8104c324>] find_task_by_pid_ns+0x50/0x6a
[   23.585176]  [<ffffffff8104c35b>] find_task_by_vpid+0x1d/0x1f
[   23.585176]  [<ffffffff81047727>] sys_setpgid+0x67/0x193
[   23.585176]  [<ffffffff810029eb>] system_call_fastpath+0x16/0x1b
[   24.959669] type=1400 audit(1282938522.956:4): avc:  denied  { module_request } for  pid=766 comm="hwclock" kmod="char-major-10-135" scontext=system_u:system_r:hwclock_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclas

It turns out that the setpgid() system call fails to enter an RCU
read-side critical section before doing a PID-to-task_struct translation.
This commit therefore does rcu_read_lock() before the translation, and
also does rcu_read_unlock() after the last use of the returned pointer.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: NDavid Howells <dhowells@redhat.com>
      950eaaca
    • L
      tracing: Fix a race in function profile · 3aaba20f
      由 Li Zefan 提交于 
      While we are reading trace_stat/functionX and someone just
disabled function_profile at that time, we can trigger this:

	divide error: 0000 [#1] PREEMPT SMP
	...
	EIP is at function_stat_show+0x90/0x230
	...

This fix just takes the ftrace_profile_lock and checks if
rec->counter is 0. If it's 0, we know the profile buffer
has been reset.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: stable@kernel.org
LKML-Reference: <4C723644.4040708@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      3aaba20f
  19. 31 8月, 2010 2 次提交
  21. 30 8月, 2010 1 次提交
    • S
      perf_events: Fix time tracking for events with pid != -1 and cpu != -1 · fa66f07a
      由 Stephane Eranian 提交于 
      Per-thread events with a cpu filter, i.e., cpu != -1, were not
reporting correct timings when the thread never ran on the
monitored cpu. The time enabled was reported as a negative
value.

This patch fixes the problem by updating tstamp_stopped,
tstamp_running in event_sched_out() for events with filters and
which are marked as INACTIVE.

The function group_sched_out() is modified to systematically
call into event_sched_out() to avoid duplicating the timing
adjustment code twice.

With the patch, I now get:

$ task_cpu -i -e unhalted_core_cycles,unhalted_core_cycles
noploop 2 noploop for 2 seconds
CPU0 0		   unhalted_core_cycles (ena=1,991,136,594, run=0)
CPU0 0		   unhalted_core_cycles (ena=1,991,136,594, run=0)

CPU1 0		   unhalted_core_cycles (ena=1,991,136,594, run=0)
CPU1 0		   unhalted_core_cycles (ena=1,991,136,594, run=0)

CPU2 0		   unhalted_core_cycles (ena=1,991,136,594, run=0)
CPU2 0		   unhalted_core_cycles (ena=1,991,136,594, run=0)

CPU3 4,747,990,931 unhalted_core_cycles (ena=1,991,136,594, run=1,991,136,594)
CPU3 4,747,990,931 unhalted_core_cycles (ena=1,991,136,594, run=1,991,136,594)
Signed-off-by: NStephane Eranian <eranian@gmail.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: davem@davemloft.net
Cc: fweisbec@gmail.com
Cc: perfmon2-devel@lists.sf.net
Cc: eranian@google.com
LKML-Reference: <4c76802d.aae9d80a.115d.70fe@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      fa66f07a
  23. 27 8月, 2010 1 次提交
  25. 25 8月, 2010 4 次提交
    • A
      tracing/trace_stack: Fix stack trace on ppc64 · 151772db
      由 Anton Blanchard 提交于 
      save_stack_trace() stores the instruction pointer, not the
function descriptor. On ppc64 the trace stack code currently
dereferences the instruction pointer and shows 8 bytes of
instructions in our backtraces:

 # cat /sys/kernel/debug/tracing/stack_trace
        Depth    Size   Location    (26 entries)
        -----    ----   --------
  0)     5424     112   0x6000000048000004
  1)     5312     160   0x60000000ebad01b0
  2)     5152     160   0x2c23000041c20030
  3)     4992     240   0x600000007c781b79
  4)     4752     160   0xe84100284800000c
  5)     4592     192   0x600000002fa30000
  6)     4400     256   0x7f1800347b7407e0
  7)     4144     208   0xe89f0108f87f0070
  8)     3936     272   0xe84100282fa30000

Since we aren't dealing with function descriptors, use %pS
instead of %pF to fix it:

 # cat /sys/kernel/debug/tracing/stack_trace
        Depth    Size   Location    (26 entries)
        -----    ----   --------
  0)     5424     112   ftrace_call+0x4/0x8
  1)     5312     160   .current_io_context+0x28/0x74
  2)     5152     160   .get_io_context+0x48/0xa0
  3)     4992     240   .cfq_set_request+0x94/0x4c4
  4)     4752     160   .elv_set_request+0x60/0x84
  5)     4592     192   .get_request+0x2d4/0x468
  6)     4400     256   .get_request_wait+0x7c/0x258
  7)     4144     208   .__make_request+0x49c/0x610
  8)     3936     272   .generic_make_request+0x390/0x434
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: rostedt@goodmis.org
Cc: fweisbec@gmail.com
LKML-Reference: <20100825013238.GE28360@kryten>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      151772db
    • T
      workqueue: fix cwq->nr_active underflow · 8a2e8e5d
      由 Tejun Heo 提交于 
      cwq->nr_active is used to keep track of how many work items are active
for the cpu workqueue, where 'active' is defined as either pending on
global worklist or executing.  This is used to implement the
max_active limit and workqueue freezing.  If a work item is queued
after nr_active has already reached max_active, the work item doesn't
increment nr_active and is put on the delayed queue and gets activated
later as previous active work items retire.

try_to_grab_pending() which is used in the cancellation path
unconditionally decremented nr_active whether the work item being
cancelled is currently active or delayed, so cancelling a delayed work
item makes nr_active underflow.  This breaks max_active enforcement
and triggers BUG_ON() in destroy_workqueue() later on.

This patch fixes this bug by adding a flag WORK_STRUCT_DELAYED, which
is set while a work item in on the delayed list and making
try_to_grab_pending() decrement nr_active iff the work item is
currently active.

The addition of the flag enlarges cwq alignment to 256 bytes which is
getting a bit too large.  It's scheduled to be reduced back to 128
bytes by merging WORK_STRUCT_PENDING and WORK_STRUCT_CWQ in the next
devel cycle.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
      8a2e8e5d
    • D
      PM QoS: Fix kzalloc() parameters swapped in pm_qos_power_open() · bac1e74d
      由 David Alan Gilbert 提交于 
      sparse spotted that the kzalloc() in pm_qos_power_open() in the
current Linus' git tree had its parameters swapped.  Fix this.
Signed-off-by: NDavid Alan Gilbert <linux@treblig.org>
Acked-by: Nmark gross <markgross@thegnar.org>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
      bac1e74d
    • T
      workqueue: improve destroy_workqueue() debuggability · e41e704b
      由 Tejun Heo 提交于 
      Now that the worklist is global, having works pending after wq
destruction can easily lead to oops and destroy_workqueue() have
several BUG_ON()s to catch these cases.  Unfortunately, BUG_ON()
doesn't tell much about how the work became pending after the final
flush_workqueue().

This patch adds WQ_DYING which is set before the final flush begins.
If a work is requested to be queued on a dying workqueue,
WARN_ON_ONCE() is triggered and the request is ignored.  This clearly
indicates which caller is trying to queue a work on a dying workqueue
and keeps the system working in most cases.

Locking rule comment is updated such that the 'I' rule includes
modifying the field from destruction path.
Signed-off-by: NTejun Heo <tj@kernel.org>
      e41e704b
  27. 23 8月, 2010 4 次提交
    • N
      workqueue: mark lock acquisition on worker_maybe_bind_and_lock() · 972fa1c5
      由 Namhyung Kim 提交于 
      worker_maybe_bind_and_lock() actually grabs gcwq->lock but was missing proper
annotation. Add it. So this patch will remove following sparse warnings:

 kernel/workqueue.c:1214:13: warning: context imbalance in 'worker_maybe_bind_and_lock' - wrong count at exit
 arch/x86/include/asm/irqflags.h:44:9: warning: context imbalance in 'worker_rebind_fn' - unexpected unlock
 kernel/workqueue.c:1991:17: warning: context imbalance in 'rescuer_thread' - unexpected unlock
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
      972fa1c5
    • N
      workqueue: annotate lock context change · 06bd6ebf
      由 Namhyung Kim 提交于 
      Some of internal functions called within gcwq->lock context releases and
regrabs the lock but were missing proper annotations. Add it.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
      06bd6ebf
    • T
      mutex: Improve the scalability of optimistic spinning · 9d0f4dcc
      由 Tim Chen 提交于 
      There is a scalability issue for current implementation of optimistic
mutex spin in the kernel.  It is found on a 8 node 64 core Nehalem-EX
system (HT mode).

The intention of the optimistic mutex spin is to busy wait and spin on a
mutex if the owner of the mutex is running, in the hope that the mutex
will be released soon and be acquired, without the thread trying to
acquire mutex going to sleep. However, when we have a large number of
threads, contending for the mutex, we could have the mutex grabbed by
other thread, and then another ……, and we will keep spinning, wasting cpu
cycles and adding to the contention.  One possible fix is to quit
spinning and put the current thread on wait-list if mutex lock switch to
a new owner while we spin, indicating heavy contention (see the patch
included).

I did some testing on a 8 socket Nehalem-EX system with a total of 64
cores. Using Ingo's test-mutex program that creates/delete files with 256
threads (http://lkml.org/lkml/2006/1/8/50) , I see the following speed up
after putting in the mutex spin fix:

 ./mutex-test V 256 10
                 Ops/sec
 2.6.34          62864
 With fix        197200

Repeating the test with Aim7 fserver workload, again there is a speed up
with the fix:

                 Jobs/min
 2.6.34          91657
 With fix        149325

To look at the impact on the distribution of mutex acquisition time, I
collected the mutex acquisition time on Aim7 fserver workload with some
instrumentation.  The average acquisition time is reduced by 48% and
number of contentions reduced by 32%.

                 #contentions    Time to acquire mutex (cycles)
 2.6.34          72973           44765791
 With fix        49210           23067129

The histogram of mutex acquisition time is listed below.  The acquisition
time is in 2^bin cycles.  We see that without the fix, the acquisition
time is mostly around 2^26 cycles.  With the fix, we the distribution get
spread out a lot more towards the lower cycles, starting from 2^13.
However, there is an increase of the tail distribution with the fix at
2^28 and 2^29 cycles.  It seems a small price to pay for the reduced
average acquisition time and also getting the cpu to do useful work.

 Mutex acquisition time distribution (acq time = 2^bin cycles):
         2.6.34                  With Fix
 bin     #occurrence     %       #occurrence     %
 11      2               0.00%   120             0.24%
 12      10              0.01%   790             1.61%
 13      14              0.02%   2058            4.18%
 14      86              0.12%   3378            6.86%
 15      393             0.54%   4831            9.82%
 16      710             0.97%   4893            9.94%
 17      815             1.12%   4667            9.48%
 18      790             1.08%   5147            10.46%
 19      580             0.80%   6250            12.70%
 20      429             0.59%   6870            13.96%
 21      311             0.43%   1809            3.68%
 22      255             0.35%   2305            4.68%
 23      317             0.44%   916             1.86%
 24      610             0.84%   233             0.47%
 25      3128            4.29%   95              0.19%
 26      63902           87.69%  122             0.25%
 27      619             0.85%   286             0.58%
 28      0               0.00%   3536            7.19%
 29      0               0.00%   903             1.83%
 30      0               0.00%   0               0.00%

I've done similar experiments with 2.6.35 kernel on smaller boxes as
well.  One is on a dual-socket Westmere box (12 cores total, with HT).
Another experiment is on an old dual-socket Core 2 box (4 cores total, no
HT)

On the 12-core Westmere box, I see a 250% increase for Ingo's mutex-test
program with my mutex patch but no significant difference in aim7's
fserver workload.

On the 4-core Core 2 box, I see the difference with the patch for both
mutex-test and aim7 fserver are negligible.

So far, it seems like the patch has not caused regression on smaller
systems.
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org> # .35.x
LKML-Reference: <1282168827.9542.72.camel@schen9-DESK>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      9d0f4dcc
    • P
      watchdog: Don't throttle the watchdog · c6db67cd
      由 Peter Zijlstra 提交于 
      Stephane reported that when the machine locks up, the regular ticks,
which are responsible to resetting the throttle count, stop too.

Hence the NMI watchdog can end up being throttled before it reports on
the locked up state, and we end up being sad..

Cure this by having the watchdog overflow reset its own throttle count.
Reported-by: NStephane Eranian <eranian@google.com>
Tested-by: NStephane Eranian <eranian@google.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1282215916.1926.4696.camel@laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c6db67cd
  29. 22 8月, 2010 1 次提交
    • A
      workqueue: Add basic tracepoints to track workqueue execution · e36c886a
      由 Arjan van de Ven 提交于 
      With the introduction of the new unified work queue thread pools,
we lost one feature: It's no longer possible to know which worker
is causing the CPU to wake out of idle. The result is that PowerTOP
now reports a lot of "kworker/a:b" instead of more readable results.

This patch adds a pair of tracepoints to the new workqueue code,
similar in style to the timer/hrtimer tracepoints.

With this pair of tracepoints, the next PowerTOP can correctly
report which work item caused the wakeup (and how long it took):

Interrupt (43)            i915      time   3.51ms    wakeups 141
Work      ieee80211_iface_work      time   0.81ms    wakeups  29
Work              do_dbs_timer      time   0.55ms    wakeups  24
Process                   Xorg      time  21.36ms    wakeups   4
Timer    sched_rt_period_timer      time   0.01ms    wakeups   1
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e36c886a
  31. 21 8月, 2010 3 次提交
  33. 20 8月, 2010 2 次提交
  35. 18 8月, 2010 1 次提交
    • N
      fs: fs_struct rwlock to spinlock · 2a4419b5
      由 Nick Piggin 提交于 
      fs: fs_struct rwlock to spinlock

struct fs_struct.lock is an rwlock with the read-side used to protect root and
pwd members while taking references to them. Taking a reference to a path
typically requires just 2 atomic ops, so the critical section is very small.
Parallel read-side operations would have cacheline contention on the lock, the
dentry, and the vfsmount cachelines, so the rwlock is unlikely to ever give a
real parallelism increase.

Replace it with a spinlock to avoid one or two atomic operations in typical
path lookup fastpath.
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      2a4419b5