Skip to content

L
linux

Linux-御风守护者 / linux
与 Fork 源项目一致

从无法访问的项目Fork

通知 1
Star 0
Fork 0
L
linux

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 11 8月, 2010 1 次提交
  3. 10 8月, 2010 3 次提交
  5. 08 8月, 2010 1 次提交
    • A
      block: push down BKL into .open and .release · 6e9624b8
      由 Arnd Bergmann 提交于 
      The open and release block_device_operations are currently
called with the BKL held. In order to change that, we must
first make sure that all drivers that currently rely
on this have no regressions.

This blindly pushes the BKL into all .open and .release
operations for all block drivers to prepare for the
next step. The drivers can subsequently replace the BKL
with their own locks or remove it completely when it can
be shown that it is not needed.

The functions blkdev_get and blkdev_put are the only
remaining users of the big kernel lock in the block
layer, besides a few uses in the ioctl code, none
of which need to serialize with blkdev_{get,put}.

Most of these two functions is also under the protection
of bdev->bd_mutex, including the actual calls to
->open and ->release, and the common code does not
access any global data structures that need the BKL.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
      6e9624b8
  7. 05 8月, 2010 1 次提交
  9. 11 6月, 2010 3 次提交
  11. 28 5月, 2010 2 次提交
  13. 22 5月, 2010 2 次提交
    • J
      Introduce freeze_super and thaw_super for the fsfreeze ioctl · 18e9e510
      由 Josef Bacik 提交于 
      Currently the way we do freezing is by passing sb>s_bdev to freeze_bdev and then
letting it do all the work.  But freezing is more of an fs thing, and doesn't
really have much to do with the bdev at all, all the work gets done with the
super.  In btrfs we do not populate s_bdev, since we can have multiple bdev's
for one fs and setting s_bdev makes removing devices from a pool kind of tricky.
This means that freezing a btrfs filesystem fails, which causes us to corrupt
with things like tux-on-ice which use the fsfreeze mechanism.  So instead of
populating sb->s_bdev with a random bdev in our pool, I've broken the actual fs
freezing stuff into freeze_super and thaw_super.  These just take the
super_block that we're freezing and does the appropriate work.  It's basically
just copy and pasted from freeze_bdev.  I've then converted freeze_bdev over to
use the new super helpers.  I've tested this with ext4 and btrfs and verified
everything continues to work the same as before.

The only new gotcha is multiple calls to the fsfreeze ioctl will return EBUSY if
the fs is already frozen.  I thought this was a better solution than adding a
freeze counter to the super_block, but if everybody hates this idea I'm open to
suggestions.  Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      18e9e510
    • A
      Move grabbing s_umount to callers of grab_super() · d3f21473
      由 Al Viro 提交于 
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      d3f21473
  15. 29 4月, 2010 1 次提交
  17. 27 4月, 2010 2 次提交
    • T
      block: implement bd_claiming and claiming block · 6b4517a7
      由 Tejun Heo 提交于 
      Currently, device claiming for exclusive open is done after low level
open - disk->fops->open() - has completed successfully.  This means
that exclusive open attempts while a device is already exclusively
open will fail only after disk->fops->open() is called.

cdrom driver issues commands during open() which means that O_EXCL
open attempt can unintentionally inject commands to in-progress
command stream for burning thus disturbing burning process.  In most
cases, this doesn't cause problems because the first command to be
issued is TUR which most devices can process in the middle of burning.
However, depending on how a device replies to TUR during burning,
cdrom driver may end up issuing further commands.

This can't be resolved trivially by moving bd_claim() before doing
actual open() because that means an open attempt which will end up
failing could interfere other legit O_EXCL open attempts.
ie. unconfirmed open attempts can fail others.

This patch resolves the problem by introducing claiming block which is
started by bd_start_claiming() and terminated either by bd_claim() or
bd_abort_claiming().  bd_claim() from inside a claiming block is
guaranteed to succeed and once a claiming block is started, other
bd_start_claiming() or bd_claim() attempts block till the current
claiming block is terminated.

bd_claim() can still be used standalone although now it always
synchronizes against claiming blocks, so the existing users will keep
working without any change.

blkdev_open() and open_bdev_exclusive() are converted to use claiming
blocks so that exclusive open attempts from these functions don't
interfere with the existing exclusive open.

This problem was discovered while investigating bko#15403.

  https://bugzilla.kernel.org/show_bug.cgi?id=15403

The burning problem itself can be resolved by updating userspace
probing tools to always open w/ O_EXCL.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NMatthias-Christian Ott <ott@mirix.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      6b4517a7
    • T
      block: factor out bd_may_claim() · 1a3cbbc5
      由 Tejun Heo 提交于 
      Factor out bd_may_claim() from bd_claim(), add comments and apply a
couple of cosmetic edits.  This is to prepare for further updates to
claim path.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      1a3cbbc5
  19. 25 4月, 2010 1 次提交
    • A
      fs/block_dev.c: fix performance regression in O_DIRECT|O_SYNC writes to block devices · b8af67e2
      由 Anton Blanchard 提交于 
      We are seeing a large regression in database performance on recent
kernels.  The database opens a block device with O_DIRECT|O_SYNC and a
number of threads write to different regions of the file at the same time.

A simple test case is below.  I haven't defined DEVICE since getting it
wrong will destroy your data :) On an 3 disk LVM with a 64k chunk size we
see about 17MB/sec and only a few threads in IO wait:

procs  -----io---- -system-- -----cpu------
 r  b     bi    bo   in   cs us sy id wa st
 0  3      0 16170  656 2259  0  0 86 14  0
 0  2      0 16704  695 2408  0  0 92  8  0
 0  2      0 17308  744 2653  0  0 86 14  0
 0  2      0 17933  759 2777  0  0 89 10  0

Most threads are blocking in vfs_fsync_range, which has:

        mutex_lock(&mapping->host->i_mutex);
        err = fop->fsync(file, dentry, datasync);
        if (!ret)
                ret = err;
        mutex_unlock(&mapping->host->i_mutex);

commit 148f948b (vfs: Introduce new
helpers for syncing after writing to O_SYNC file or IS_SYNC inode) offers
some explanation of what is going on:

    Use these new helpers for syncing from generic VFS functions. This makes
    O_SYNC writes to block devices acquire i_mutex for syncing. If we really
    care about this, we can make block_fsync() drop the i_mutex and reacquire
    it before it returns.

Thanks Jan for such a good commit message!  As well as dropping i_mutex,
Christoph suggests we should remove the call to sync_blockdev():

> sync_blockdev is an overcomplicated alias for filemap_write_and_wait on
> the block device inode, which is exactly what we did just before calling
> into ->fsync

The patch below incorporates both suggestions. With it the testcase improves
from 17MB/s to 68M/sec:

procs  -----io---- -system-- -----cpu------
 r  b     bi    bo   in   cs us sy id wa st
 0  7      0 65536 1000 3878  0  0 70 30  0
 0 34      0 69632 1016 3921  0  1 46 53  0
 0 57      0 69632 1000 3921  0  0 55 45  0
 0 53      0 69640  754 4111  0  0 81 19  0

Testcase:

#define _GNU_SOURCE
#include <stdio.h>
#include <pthread.h>
#include <unistd.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>

#define NR_THREADS 64
#define BUFSIZE (64 * 1024)

#define DEVICE "/dev/mapper/XXXXXX"

#define ALIGN(VAL, SIZE) (((VAL)+(SIZE)-1) & ~((SIZE)-1))

static int fd;

static void *doit(void *arg)
{
	unsigned long offset = (long)arg;
	char *b, *buf;

	b = malloc(BUFSIZE + 1024);
	buf = (char *)ALIGN((unsigned long)b, 1024);
	memset(buf, 0, BUFSIZE);

	while (1)
		pwrite(fd, buf, BUFSIZE, offset);
}

int main(int argc, char *argv[])
{
	int flags = O_RDWR|O_DIRECT;
	int i;
	unsigned long offset = 0;

	if (argc > 1 && !strcmp(argv[1], "O_SYNC"))
		flags |= O_SYNC;

	fd = open(DEVICE, flags);
	if (fd == -1) {
		perror("open");
		exit(1);
	}

	for (i = 0; i < NR_THREADS-1; i++) {
		pthread_t tid;
		pthread_create(&tid, NULL, doit, (void *)offset);
		offset += BUFSIZE;
	}
	doit((void *)offset);

	return 0;
}
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NJan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b8af67e2
  21. 07 4月, 2010 2 次提交
  23. 07 2月, 2010 1 次提交
  25. 29 10月, 2009 1 次提交
    • C
      blkdev: flush disk cache on ->fsync · ab0a9735
      由 Christoph Hellwig 提交于 
      Currently there is no barrier support in the block device code.  That
means we cannot guarantee any sort of data integerity when using the
block device node with dis kwrite caches enabled.  Using the raw block
device node is a typical use case for virtualization (and I assume
databases, too).  This patch changes block_fsync to issue a cache flush
and thus make fsync on block device nodes actually useful.

Note that in mainline we would also need to add such code to the
->aio_write method for O_SYNC handling, but assuming that Jan's patch
series for the O_SYNC rewrite goes in it will also call into ->fsync
for 2.6.32.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      ab0a9735
  27. 26 10月, 2009 1 次提交
  29. 24 9月, 2009 2 次提交
    • C
      freeze_bdev: grab active reference to frozen superblocks · 4504230a
      由 Christoph Hellwig 提交于 
      Currently we held s_umount while a filesystem is frozen, despite that we
might return to userspace and unlock it from a different process.  Instead
grab an active reference to keep the file system busy and add an explicit
check for frozen filesystems in remount and reject the remount instead
of blocking on s_umount.

Add a new get_active_super helper to super.c for use by freeze_bdev that
grabs an active reference to a superblock from a given block device.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      4504230a
    • C
      freeze_bdev: kill bd_mount_sem · 4fadd7bb
      由 Christoph Hellwig 提交于 
      Now that we have the freeze count there is not much reason for bd_mount_sem
anymore.  The actual freeze/thaw operations are serialized using the
bd_fsfreeze_mutex, and the only other place we take bd_mount_sem is
get_sb_bdev which tries to prevent mounting a filesystem while the block
device is frozen.  Instead of add a check for bd_fsfreeze_count and
return -EBUSY if a filesystem is frozen.  While that is a change in user
visible behaviour a failing mount is much better for this case rather
than having the mount process stuck uninterruptible for a long time.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      4fadd7bb
  31. 22 9月, 2009 1 次提交
  33. 16 9月, 2009 1 次提交
  35. 14 9月, 2009 1 次提交
  37. 30 7月, 2009 1 次提交
  39. 12 6月, 2009 4 次提交
  41. 05 6月, 2009 1 次提交
  43. 23 5月, 2009 1 次提交
  45. 28 4月, 2009 1 次提交
  47. 01 4月, 2009 1 次提交
  49. 28 3月, 2009 1 次提交
  51. 10 1月, 2009 1 次提交
    • T
      filesystem freeze: implement generic freeze feature · fcccf502
      由 Takashi Sato 提交于 
      The ioctls for the generic freeze feature are below.
o Freeze the filesystem
  int ioctl(int fd, int FIFREEZE, arg)
    fd: The file descriptor of the mountpoint
    FIFREEZE: request code for the freeze
    arg: Ignored
    Return value: 0 if the operation succeeds. Otherwise, -1

o Unfreeze the filesystem
  int ioctl(int fd, int FITHAW, arg)
    fd: The file descriptor of the mountpoint
    FITHAW: request code for unfreeze
    arg: Ignored
    Return value: 0 if the operation succeeds. Otherwise, -1
    Error number: If the filesystem has already been unfrozen,
                  errno is set to EINVAL.

[akpm@linux-foundation.org: fix CONFIG_BLOCK=n]
Signed-off-by: NTakashi Sato <t-sato@yk.jp.nec.com>
Signed-off-by: NMasayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com>
Cc: <xfs-masters@oss.sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      fcccf502
  53. 09 1月, 2009 1 次提交
    • N
      md: make devices disappear when they are no longer needed. · d3374825
      由 NeilBrown 提交于 
      Currently md devices, once created, never disappear until the module
is unloaded.  This is essentially because the gendisk holds a
reference to the mddev, and the mddev holds a reference to the
gendisk, this a circular reference.

If we drop the reference from mddev to gendisk, then we need to ensure
that the mddev is destroyed when the gendisk is destroyed.  However it
is not possible to hook into the gendisk destruction process to enable
this.

So we drop the reference from the gendisk to the mddev and destroy the
gendisk when the mddev gets destroyed.  However this has a
complication.
Between the call
   __blkdev_get->get_gendisk->kobj_lookup->md_probe
and the call
   __blkdev_get->md_open

there is no obvious way to hold a reference on the mddev any more, so
unless something is done, it will disappear and gendisk will be
destroyed prematurely.

Also, once we decide to destroy the mddev, there will be an unlockable
moment before the gendisk is unlinked (blk_unregister_region) during
which a new reference to the gendisk can be created.  We need to
ensure that this reference can not be used.  i.e. the ->open must
fail.

So:
 1/  in md_probe we set a flag in the mddev (hold_active) which
     indicates that the array should be treated as active, even
     though there are no references, and no appearance of activity.
     This is cleared by md_release when the device is closed if it
     is no longer needed.
     This ensures that the gendisk will survive between md_probe and
     md_open.

 2/  In md_open we check if the mddev we expect to open matches
     the gendisk that we did open.
     If there is a mismatch we return -ERESTARTSYS and modify
     __blkdev_get to retry from the top in that case.
     In the -ERESTARTSYS sys case we make sure to wait until
     the old gendisk (that we succeeded in opening) is really gone so
     we loop at most once.

Some udev configurations will always open an md device when it first
appears.   If we allow an md device that was just created by an open
to disappear on an immediate close, then this can race with such udev
configurations and result in an infinite loop the device being opened
and closed, then re-open due to the 'ADD' even from the first open,
and then close and so on.
So we make sure an md device, once created by an open, remains active
at least until some md 'ioctl' has been made on it.  This means that
all normal usage of md devices will allow them to disappear promptly
when not needed, but the worst that an incorrect usage will do it
cause an inactive md device to be left in existence (it can easily be
removed).

As an array can be stopped by writing to a sysfs attribute
  echo clear > /sys/block/mdXXX/md/array_state
we need to use scheduled work for deleting the gendisk and other
kobjects.  This allows us to wait for any pending gendisk deletion to
complete by simply calling flush_scheduled_work().
Signed-off-by: NNeilBrown <neilb@suse.de>
      d3374825
  55. 07 1月, 2009 1 次提交