- 07 10月, 2012 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
Pull m68knommu arch updates from Greg Ungerer: "Most of it is a cleanup of the ColdFire hardware header files. We have had a few occurrances of bugs caused by inconsistent definitions of peripheral addresses. These patches make them all consistent, and also clean out a bunch of old crap. Overall we remove about 1000 lines." * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (27 commits) m68knommu: fix inconsistent formating in ColdFire 5407 definitions m68knommu: fix inconsistent formating in ColdFire 5307 definitions m68knommu: fix inconsistent formating in ColdFire 527x definitions m68knommu: fix inconsistent formating in ColdFire 5272 definitions m68knommu: fix inconsistent formating in ColdFire 523x definitions m68knommu: clean up ColdFire 54xx General Timer definitions m68knommu: clean up Pin Assignment definitions for the 54xx ColdFire CPU m68knommu: fix multi-function pin setup for FEC module on ColdFire 523x m68knommu: move ColdFire slice timer address defiens to 54xx header m68knommu: use read/write IO access functions in ColdFire m532x setup code m68knommu: modify ColdFire 532x GPIO register definitions to be consistent m68knommu: remove a lot of unsed definitions for 532x ColdFire m68knommu: use definitions for the ColdFire 528x FEC multi-function pins m68knommu: remove address offsets relative to IPSBAR for ColdFire 527x m68knommu: remove unused ColdFire 5282 register definitions m68knommu: fix wrong register offsets used for ColdFire 5272 multi-function pins m68knommu: make ColdFire 5249 MBAR2 register definitions absolute addresses m68knommu: make remaining ColdFire 5272 register definitions absolute addresses m68knommu: make ColdFire Park and Assignment register definitions absolute addresses m68knommu: make ColdFire Chip Select register definitions absolute addresses ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull virtio changes from Rusty Russell: "New workflow: same git trees pulled by linux-next get sent straight to Linus. Git is awkward at shuffling patches compared with quilt or mq, but that doesn't happen often once things get into my -next branch." * 'virtio-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (24 commits) lguest: fix occasional crash in example launcher. virtio-blk: Disable callback in virtblk_done() virtio_mmio: Don't attempt to create empty virtqueues virtio_mmio: fix off by one error allocating queue drivers/virtio/virtio_pci.c: fix error return code virtio: don't crash when device is buggy virtio: remove CONFIG_VIRTIO_RING virtio: add help to CONFIG_VIRTIO option. virtio: support reserved vqs virtio: introduce an API to set affinity for a virtqueue virtio-ring: move queue_index to vring_virtqueue virtio_balloon: not EXPERIMENTAL any more. virtio-balloon: dependency fix virtio-blk: fix NULL checking in virtblk_alloc_req() virtio-blk: Add REQ_FLUSH and REQ_FUA support to bio path virtio-blk: Add bio-based IO path for virtio-blk virtio: console: fix error handling in init() function tools: Fix pthread flag for Makefile of trace-agent used by virtio-trace tools: Add guest trace agent as a user tool virtio/console: Allocate scatterlist according to the current pipe size ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull late ARM soc platform updates from Olof Johansson: "This branch contains updates to OMAP and Marvell platforms (kirkwood, dove, mvebu) that came in after we had done the big multiplatform merges, so they were kept separate from the rest, and not separated into the traditional topics of cleanup/driver/platform features. For OMAP, the updates are: - Runtime PM conversions for the GPMC and RNG IP blocks - Preparation patches for the OMAP common clock framework conversion - clkdev alias additions required by other drivers - Performance Monitoring Unit (PMU) support for OMAP2, 3, and non-4430 OMAP4 - OMAP hwmod code and data improvements - Preparation patches for the IOMMU runtime PM conversion - Preparation patches for OMAP4 full-chip retention support For Kirkwood/Dove/mvebu: - New driver for "address decoder controller" for mvebu, which is a piece of hardware that configures addressable devices and peripherals. First user is the boot rom aperture on armada XP since it is needed for SMP support. - New device tree bindings for peripherals such as gpio-fan, iconnect nand, mv_cesa and the above address decoder controller. - Some defconfig updates, mostly to enable new DT boards and a few drivers. - New drivers using the pincontrol subsystem for dove, kirkwood and mvebu - New clean gpio driver for mvebu" * tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits) ARM: mvebu: fix build breaks from multi-platform conversion ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70 ARM: OMAP2+: PMU: Add runtime PM support ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD ARM: OMAP3: hwmod data: Add debugss HWMOD data ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP hwrng: OMAP: remove SoC restrictions from driver registration ARM: OMAP: split OMAP1, OMAP2+ RNG device registration hwrng: OMAP: convert to use runtime PM hwrng: OMAP: store per-device data in per-device variables, not file statics ARM: OMAP2xxx: hwmod/CM: add RNG integration data ARM: OMAP2+: gpmc: minimal driver support ARM: OMAP2+: gpmc: Adapt to HWMOD ARM: OMAP2/3: hwmod data: add gpmc ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp ARM: OMAP3: hwmod data: add mmu data for iva and isp ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM soc defconfig updates from Olof Johansson: "This might be the last time we do a standalone defconfig branch, since we now prefer to get them with the rest of the subarch updates instead. These add a handful of useful options on various platforms, enable new boards and SoCs, etc." * tag 'defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: tegra: defconfig updates ARM: LPC32xx: Defconfig update ARM: mach-shmobile: marzen: defconfig update ARM: mxs_defconfig: Add SPI and LRADC support ARM: s3c6400_defconfig: enable more boards in defconfig ARM: imx_v6_v7_defconfig: Remove CONFIG_DEFAULT_MMAP_MIN_ADDR ARM: imx_v6_v7_defconfig: Add Chipidea USB driver support ARM: mxs_defconfig: Add framebuffer support ARM: mxs_defconfig: Add LED, PWM and MTD_CHAR support ARM: mxs_defconfig: Enable USB host
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media updates from Mauro Carvalho Chehab: "The first part of the media updates for Kernel 3.7. This series contain: - A major tree renaming patch series: now, drivers are organized internally by their used bus, instead of by V4L2 and/or DVB API, providing a cleaner driver location for hybrid drivers that implement both APIs, and allowing to cleanup the Kconfig items and make them more intuitive for the end user; - Media Kernel developers are typically very lazy with their duties of keeping the MAINTAINERS entries for their drivers updated. As now the tree is more organized, we're doing an effort to add/update those entries for the drivers that aren't currently orphan; - Several DVB USB drivers got moved to a new DVB USB v2 core; the new core fixes several bugs (as the existing one that got bitroted). Now, suspend/resume finally started to work fine (at least with some devices - we should expect more work with regards to it); - added multistream support for DVB-T2, and unified the API for DVB-S2 and ISDB-S. Backward binary support is preserved; - as usual, a few new drivers, some V4L2 core improvements and lots of drivers improvements and fixes. There are some points to notice on this series: 1) you should expect a trivial merge conflict on your tree, with the removal of Documentation/feature-removal-schedule.txt: this series would be adding two additional entries there. I opted to not rebase it due to this recent change; 2) With regards to the PCTV 520e udev-related breakage, I opted to fix it in a way that the patches can be backported to 3.5 even without your firmware fix patch. This way, Greg doesn't need to rush backporting your patch (as there are still the firmware cache and firmware path customization issues to be addressed there). I'll send later a patch (likely after the end of the merge window) reverting the rest of the DRX-K async firmware request, fully restoring its original behaviour to allow media drivers to initialize everything serialized as before for 3.7 and upper. 3) I'm planning to work on this weekend to test the DMABUF patches for V4L2. The patches are on my queue for several Kernel cycles, but, up to now, there is/was no way to test the series locally. I have some concerns about this particular changeset with regards to security issues, and with regards to the replacement of the old VIDIOC_OVERLAY ioctl's that is broken on modern systems, due to GPU drivers change. The Overlay API allows direct PCI2PCI transfers from a media capture card into the GPU framebuffer, but its API is crappy. Also, the only existing X11 driver that implements it requires a XV extension that is not available anymore on modern drivers. The DMABUF can do the same thing, but with it is promising to be a properly-designed API. If I can successfully test this series and be happy with it, I should be asking you to pull them next week." * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (717 commits) em28xx: regression fix: use DRX-K sync firmware requests on em28xx drxk: allow loading firmware synchrousnously em28xx: Make all em28xx extensions to be initialized asynchronously [media] tda18271: properly report read errors in tda18271_get_id [media] tda18271: delay IR & RF calibration until init() if delay_cal is set [media] MAINTAINERS: add Michael Krufky as tda827x maintainer [media] MAINTAINERS: add Michael Krufky as tda8290 maintainer [media] MAINTAINERS: add Michael Krufky as cxusb maintainer [media] MAINTAINERS: add Michael Krufky as lg2160 maintainer [media] MAINTAINERS: add Michael Krufky as lgdt3305 maintainer [media] MAINTAINERS: add Michael Krufky as mxl111sf maintainer [media] MAINTAINERS: add Michael Krufky as mxl5007t maintainer [media] MAINTAINERS: add Michael Krufky as tda18271 maintainer [media] s5p-tv: Report only multi-plane capabilities in vidioc_querycap [media] s5p-mfc: Fix misplaced return statement in s5p_mfc_suspend() [media] exynos-gsc: Add missing static storage class specifiers [media] exynos-gsc: Remove <linux/version.h> header file inclusion [media] s5p-fimc: Fix incorrect condition in fimc_lite_reqbufs() [media] s5p-tv: Fix potential NULL pointer dereference error [media] s5k6aa: Fix possible NULL pointer dereference ...
-
git://git.infradead.org/users/cbou/linux-pstore由 Linus Torvalds 提交于
Pull pstore changes from Anton Vorontsov: 1) We no longer ad-hoc to the function tracer "high level" infrastructure and no longer use its debugfs knobs. The change slightly touches kernel/trace directory, but it got the needed ack from Steven Rostedt: http://lkml.org/lkml/2012/8/21/688 2) Added maintainers entry; 3) A bunch of fixes, nothing special. * tag 'for-v3.7' of git://git.infradead.org/users/cbou/linux-pstore: pstore: Avoid recursive spinlocks in the oops_in_progress case pstore/ftrace: Convert to its own enable/disable debugfs knob pstore/ram: Add missing platform_device_unregister MAINTAINERS: Add pstore maintainers pstore/ram: Mark ramoops_pstore_write_buf() as notrace pstore/ram: Fix printk format warning pstore/ram: Fix possible NULL dereference
-
git://git.infradead.org/battery-2.6由 Linus Torvalds 提交于
Pull battery updates from Anton Vorontsov: "1. New drivers: - Marvell 88pm860x charger and battery drivers; - Texas Instruments LP8788 charger driver; 2. Two new power supply properties: whether a battery is authentic, and chargers' maximal currents and voltages; 3. A lot of TI LP8727 Charger cleanups; 4. New features for Charger Manager, mainly now we can disable specific regulators; 5. Random fixes and cleanups for other drivers." Fix up trivial conflicts in <linux/mfd/88pm860x.h> * tag 'for-v3.7' of git://git.infradead.org/battery-2.6: (52 commits) pda_power: Remove ac_draw_failed goto and label charger-manager: Add support sysfs entry for charger charger-manager: Support limit of maximum possible charger-manager: Check fully charged state of battery periodically lp8727_charger: More pure cosmetic improvements lp8727_charger: Fix checkpatch warning lp8727_charger: Add description in the private data lp8727_charger: Fix a typo - chg_parm to chg_param lp8727_charger: Make some cosmetic changes in lp8727_delayed_func() lp8727_charger: Clean up lp8727_charger_changed() lp8727_charger: Return if the battery is discharging lp8727_charger: Make lp8727_charger_get_propery() simpler lp8727_charger: Make lp8727_ctrl_switch() inline lp8727_charger: Make lp8727_init_device() shorter lp8727_charger: Clean up lp8727_is_charger_attached() lp8727_charger: Use specific definition lp8727_charger: Clean up lp8727 definitions lp8727_charger: Use the definition rather than enum lp8727_charger: Fix code for getting battery temp lp8727_charger: Clear interrrupts at inital time ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
Pull infiniband changes from Roland Dreier: "Second batch of changes for the 3.7 merge window: - Late-breaking fix for IPoIB on mlx4 SR-IOV VFs. - Fix for IPoIB build breakage with CONFIG_INFINIBAND_IPOIB_CM=n (new netlink config changes are to blame). - Make sure retry count values are in range in RDMA CM. - A few nes hardware driver fixes and cleanups. - Have iSER initiator use >1 interrupt vectors if available." * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cma: Check that retry count values are in range IB/iser: Add more RX CQs to scale out processing of SCSI responses RDMA/nes: Bump the version number of nes driver RDMA/nes: Remove unused module parameter "send_first" RDMA/nes: Remove unnecessary if-else statement RDMA/nes: Add missing break to switch. mlx4_core: Adjust flow steering attach wrapper so that IB works on SR-IOV VFs IPoIB: Fix build with CONFIG_INFINIBAND_IPOIB_CM=n
-
git://git.infradead.org/users/dhowells/linux-headers由 Linus Torvalds 提交于
Pull UAPI disintegration fixes from David Howells: "There are three main parts: (1) I found I needed some more fixups in the wake of testing Arm64 (some asm/unistd.h files had weird guards that caused problems - mostly in arches for which I don't have a compiler) and some __KERNEL__ splitting needed to take place in Arm64. (2) I found that c6x was missing some __KERNEL__ guards in its asm/signal.h. Mark Salter pointed me at a tree with a patch to remove that file entirely and use the asm-generic variant instead. (3) Lastly, m68k turned out to have a header installation problem due to it lacking a kvm_para.h file. The conditional installation bits for linux/kvm_para.h, linux/kvm.h and linux/a.out.h weren't very well specified - and didn't work if an arch didn't have the asm/ version of that file, but there *was* an asm-generic/ version. It seems the "ifneq $((wildcard ...),)" for each of those three headers in include/kernel/Kbuild is invoked twice during header installation, and the second time it matches on the just installed asm-generic/kvm_para.h file and thus incorrectly installs linux/kvm_para.h as well. Most arches actually have an asm/kvm_para.h, so this wasn't detectable in those." * 'uapi-prep' of git://git.infradead.org/users/dhowells/linux-headers: UAPI: Fix conditional header installation handling (notably kvm_para.h on m68k) c6x: remove c6x signal.h UAPI: Split compound conditionals containing __KERNEL__ in Arm64 UAPI: Fix the guards on various asm/unistd.h files c6x: make dsk6455 the default config
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux由 Linus Torvalds 提交于
Pull SLAB changes from Pekka Enberg: "New and noteworthy: * More SLAB allocator unification patches from Christoph Lameter and others. This paves the way for slab memcg patches that hopefully will land in v3.8. * SLAB tracing improvements from Ezequiel Garcia. * Kernel tainting upon SLAB corruption from Dave Jones. * Miscellanous SLAB allocator bug fixes and improvements from various people." * 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: (43 commits) slab: Fix build failure in __kmem_cache_create() slub: init_kmem_cache_cpus() and put_cpu_partial() can be static mm/slab: Fix kmem_cache_alloc_node_trace() declaration Revert "mm/slab: Fix kmem_cache_alloc_node_trace() declaration" mm, slob: fix build breakage in __kmalloc_node_track_caller mm/slab: Fix kmem_cache_alloc_node_trace() declaration mm/slab: Fix typo _RET_IP -> _RET_IP_ mm, slub: Rename slab_alloc() -> slab_alloc_node() to match SLAB mm, slab: Rename __cache_alloc() -> slab_alloc() mm, slab: Match SLAB and SLUB kmem_cache_alloc_xxx_trace() prototype mm, slab: Replace 'caller' type, void* -> unsigned long mm, slob: Add support for kmalloc_track_caller() mm, slab: Remove silly function slab_buffer_size() mm, slob: Use NUMA_NO_NODE instead of -1 mm, sl[au]b: Taint kernel when we detect a corrupted slab slab: Only define slab_error for DEBUG slab: fix the DEADLOCK issue on l3 alien lock slub: Zero initial memory segment for kmem_cache and kmem_cache_node Revert "mm/sl[aou]b: Move sysfs_slab_add to common" mm/sl[aou]b: Move kmem_cache refcounting to common code ...
-
由 Linus Torvalds 提交于
Merge tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull ADM Xen support from Konrad Rzeszutek Wilk: Features: * Allow a Linux guest to boot as initial domain and as normal guests on Xen on ARM (specifically ARMv7 with virtualized extensions). PV console, block and network frontend/backends are working. Bug-fixes: * Fix compile linux-next fallout. * Fix PVHVM bootup crashing. The Xen-unstable hypervisor (so will be 4.3 in a ~6 months), supports ARMv7 platforms. The goal in implementing this architecture is to exploit the hardware as much as possible. That means use as little as possible of PV operations (so no PV MMU) - and use existing PV drivers for I/Os (network, block, console, etc). This is similar to how PVHVM guests operate in X86 platform nowadays - except that on ARM there is no need for QEMU. The end result is that we share a lot of the generic Xen drivers and infrastructure. Details on how to compile/boot/etc are available at this Wiki: http://wiki.xen.org/wiki/Xen_ARMv7_with_Virtualization_Extensions and this blog has links to a technical discussion/presentations on the overall architecture: http://blog.xen.org/index.php/2012/09/21/xensummit-sessions-new-pvh-virtualisation-mode-for-arm-cortex-a15arm-servers-and-x86/ * tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (21 commits) xen/xen_initial_domain: check that xen_start_info is initialized xen: mark xen_init_IRQ __init xen/Makefile: fix dom-y build arm: introduce a DTS for Xen unprivileged virtual machines MAINTAINERS: add myself as Xen ARM maintainer xen/arm: compile netback xen/arm: compile blkfront and blkback xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree xen/arm: receive Xen events on ARM xen/arm: initialize grant_table on ARM xen/arm: get privilege status xen/arm: introduce CONFIG_XEN on ARM xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM xen/arm: Introduce xen_ulong_t for unsigned long xen/arm: Xen detection and shared_info page mapping docs: Xen ARM DT bindings xen/arm: empty implementation of grant_table arch specific functions xen/arm: sync_bitops xen/arm: page.h definitions xen/arm: hypercalls ...
-
- 06 10月, 2012 29 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc updates from Benjamin Herrenschmidt: "Some highlights in addition to the usual batch of fixes: - 64TB address space support for 64-bit processes by Aneesh Kumar - Gavin Shan did a major cleanup & re-organization of our EEH support code (IBM fancy PCI error handling & recovery infrastructure) which paves the way for supporting different platform backends, along with some rework of the PCIe code for the PowerNV platform in order to remove home made resource allocations and instead use the generic code (which is possible after some small improvements to it done by Gavin). - Uprobes support by Ananth N Mavinakayanahalli - A pile of embedded updates from Freescale folks, including new SoC and board supports, more KVM stuff including preparing for 64-bit BookE KVM support, ePAPR 1.1 updates, etc..." Fixup trivial conflicts in drivers/scsi/ipr.c * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits) powerpc/iommu: Fix multiple issues with IOMMU pools code powerpc: Fix VMX fix for memcpy case driver/mtd:IFC NAND:Initialise internal SRAM before any write powerpc/fsl-pci: use 'Header Type' to identify PCIE mode powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get powerpc: Remove tlb batching hack for nighthawk powerpc: Set paca->data_offset = 0 for boot cpu powerpc/perf: Sample only if SIAR-Valid bit is set in P7+ powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled powerpc/mpc85xx: Update interrupt handling for IFC controller powerpc/85xx: Enable USB support in p1023rds_defconfig powerpc/smp: Do not disable IPI interrupts during suspend powerpc/eeh: Fix crash on converting OF node to edev powerpc/eeh: Lock module while handling EEH event powerpc/kprobe: Don't emulate store when kprobe stwu r1 powerpc/kprobe: Complete kprobe and migrate exception frame powerpc/kprobe: Introduce a new thread flag powerpc: Remove unused __get_user64() and __put_user64() powerpc/eeh: Global mutex to protect PE tree powerpc/eeh: Remove EEH PE for normal PCI hotplug ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking changes from David Miller: "The most important bit in here is the fix for input route caching from Eric Dumazet, it's a shame we couldn't fully analyze this in time for 3.6 as it's a 3.6 regression introduced by the routing cache removal. Anyways, will send quickly to -stable after you pull this in. Other changes of note: 1) Fix lockdep splats in team and bonding, from Eric Dumazet. 2) IPV6 adds link local route even when there is no link local address, from Nicolas Dichtel. 3) Fix ixgbe PTP implementation, from Jacob Keller. 4) Fix excessive stack usage in cxgb4 driver, from Vipul Pandya. 5) MAC length computed improperly in VLAN demux, from Antonio Quartulli." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) ipv6: release reference of ip6_null_entry's dst entry in __ip6_del_rt Remove noisy printks from llcp_sock_connect tipc: prevent dropped connections due to rcvbuf overflow silence some noisy printks in irda team: set qdisc_tx_busylock to avoid LOCKDEP splat bonding: set qdisc_tx_busylock to avoid LOCKDEP splat sctp: check src addr when processing SACK to update transport state sctp: fix a typo in prototype of __sctp_rcv_lookup() ipv4: add a fib_type to fib_info can: mpc5xxx_can: fix section type conflict can: peak_pcmcia: fix error return code can: peak_pci: fix error return code cxgb4: Fix build error due to missing linux/vmalloc.h include. bnx2x: fix ring size for 10G functions cxgb4: Dynamically allocate memory in t4_memory_rw() and get_vpd_params() ixgbe: add support for X540-AT1 ixgbe: fix poll loop for FDIRCTRL.INIT_DONE bit ixgbe: fix PTP ethtool timestamping function ixgbe: (PTP) Fix PPS interrupt code ixgbe: Fix PTP X540 SDP alignment code for PPS signal ...
-
由 Linus Torvalds 提交于
Merge misc patches from Andrew Morton: "The MM tree is rather stuck while I wait to find out what the heck is happening with sched/numa. Probably I'll need to route around all the code which was added to -next, sigh. So this is "everything else", or at least most of it - other small bits are still awaiting resolutions of various kinds." * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (180 commits) lib/decompress.c add __init to decompress_method and data kernel/resource.c: fix stack overflow in __reserve_region_with_split() omfs: convert to use beXX_add_cpu() taskstats: cgroupstats_user_cmd() may leak on error aoe: update aoe-internal version number to 50 aoe: update documentation to better reflect aoe-plus-udev usage aoe: remove unused code aoe: make dynamic block minor numbers the default aoe: update and specify AoE address guards and error messages aoe: retain static block device numbers for backwards compatibility aoe: support more AoE addresses with dynamic block device minor numbers aoe: update documentation with new URL and VM settings reference aoe: update copyright year in touched files aoe: update internal version number to 49 aoe: remove unused code and add cosmetic improvements aoe: increase net_device reference count while using it aoe: associate frames with the AoE storage target aoe: disallow unsupported AoE minor addresses aoe: do revalidation steps in order aoe: failover remote interface based on aoe_deadsecs parameter ...
-
由 Hein Tibosch 提交于
Fix the warning: WARNING: vmlinux.o(.text+0x14cfd8): Section mismatch in reference from the variable compressed_formats to the function .init.text:gunzip() The function compressed_formats() references the function __init gunzip(). etc.. Within decompress.c, compressed_formats[] needs 'a __initdata annotation', because some of it's data members refer to functions which will be unloaded after init. Consequently, its user decompress_method() will get the __init prefix. Signed-off-by: NHein Tibosch <hein_tibosch@yahoo.es> Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com> Cc: Phillip Lougher <phillip@lougher.demon.co.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 T Makphaibulchoke 提交于
Using a recursive call add a non-conflicting region in __reserve_region_with_split() could result in a stack overflow in the case that the recursive calls are too deep. Convert the recursive calls to an iterative loop to avoid the problem. Tested on a machine containing 135 regions. The kernel no longer panicked with stack overflow. Also tested with code arbitrarily adding regions with no conflict, embedding two consecutive conflicts and embedding two non-consecutive conflicts. Signed-off-by: NT Makphaibulchoke <tmac@hp.com> Reviewed-by: NRam Pai <linuxram@us.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@gmail.com> Cc: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wei Yongjun 提交于
Convert cpu_to_beXX(beXX_to_cpu(E1) + E2) to use beXX_add_cpu(). dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jesper Juhl 提交于
If prepare_reply() succeeds we have allocated memory for 'rep_skb'. If nla_reserve() then subsequently fails and returns NULL we fail to release the memory we allocated, thus causing a leak. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
Because udev use is so widespread, making the old static mapping the default is too conservative, given the severe limitations it places on usable AoE addresses. Storage virtualization and larger shelves have made the old limitations too confining. These changes make the dynamic block device minor numbers the default, removing the limitations on usable AoE addresses. The static arrangement is still available with aoe_dyndevs=0, and the aoe-stat tool from the userland aoetools package, the user space counterpart to the aoe driver, recognizes the case where there is a mismatch between the minor number in sysfs and the minor number in a special device file. Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
In general, specific is better when it comes to messages about AoE usage problems. Also, explicit checks for the AoE broadcast addresses are added. Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
The old mapping between AoE target shelf and slot addresses and the block device minor number is retained as a backwards-compatible feature, with a new "aoe_dyndevs" module parameter available for enabling dynamic block device minor numbers. Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
The ATA over Ethernet protocol uses a major (shelf) and minor (slot) address to identify a particular storage target. These changes remove an artificial limitation the aoe driver imposes on the use of AoE addresses. For example, without these changes, the slot address has a maximum of 15, but users commonly use slot numbers much greater than that. The AoE shelf and slot address space is often used sparsely. Instead of using a static mapping between AoE addresses and the block device minor number, the block device minor numbers are now allocated on demand. Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
The old area has a new URL. Also, now that the driver can perform better, it is worth mentioning the VM settings that help aoe to sink dirty pages out early, avoiding unecessary memory pressure when much I/O is going on. Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
The internal version number of the aoe driver appears in a console message when the driver loads and is usually obtained by the user with the userland aoe-version tool, part of the aoetools.[1] Although this patchset includes bugfixes backported from higher-numbered versions published on the coraid.com website, it is a form of version 49. 1. http://aoetools.sourceforge.net/Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
This change removes some unused code and attempts to increase code consistency. Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
This change eliminates the danger that the user could rmmod the driver for a network interface that is being used for AoE by the aoe driver. Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
In the driver code, "target" and aoetgt refer to a particular remote interface on the AoE storage target. The latter is identified by its AoE major and minor addresses. Commands that are being sent to an AoE storage target {major, minor} can be sent or retransmitted to any of the remote MAC addresses associated with the AoE storage target. That is, frames are naturally associated with not an aoetgt (AoE major, AoE minor, remote MAC address) but an aoedev (AoE major, AoE minor). Making the code reflect that reality simplifies the driver, especially when the path to a remote MAC address becomes unusable. Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
A guard is inserted to prevent AoE minor addresses (slot addresses) higher than 15 to be used, as they are not yet supported by the driver. There is a change coming that will allow the aoe driver to overcome this limit by using system device minor numbers dynamically, but until then, this guard prevents unexpected targets from being used by the driver when AoE targets with high minor numbers are on the AoE network. Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
The discovery process begins with an optional AoE config query command and an AoE config query response. Normally when an aoe device is already open, the config query response does not trigger an ATA identify device command to be sent out, since the response contains storage capacity information that, if changed, could surprise the user of the device. The userland "aoe-revalidate" tool uses a character device to trigger an AoE config query for a particular AoE storage target and an ATA device identify command, even when the device is open. This change causes the config query to go out first, reflecting the normal discovery sequence. The responses could come back in any order, so this change is fairly cosmetic. Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
The aoe_deadsecs module parameter allows the user to specify a hard limit on the number of seconds an AoE command can be retransmitted before the AoE block device is considered to have failed. Using aoe_deadsecs to determine the time we try using a different remote interface helps to ensure that the hard limit is not reached before we've tried to recover by sending to a different remote port. As a data storage target, the AoE target is unambiguously identified by its {major, minor} AoE address tuple, and an AoE target can have multiple MAC addresses. However, note that "target" in the driver code and comments means a {major, minor, MAC address} tuple, as in "somewhere to send packets". Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
Users with several network interfaces dedicated to AoE generally do not configure them to support different-sized AoE data payloads on purpose. For a given AoE target, there will be a set of local network interfaces that can reach it. Using only the payload that will fit in the smallest-sized MTU of all those local interfaces greatly simplifies the driver, especially in failure scenarios. Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
The dev_queue_xmit function needs to have interrupts enabled, so the most simple way to get the locking right but still fulfill that requirement is to use a process that can call dev_queue_xmit serially over queued transmissions. Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
To allow users to choose an elevator algorithm for their particular workloads, change from a make_request-style driver to an I/O-request-queue-handler-style driver. We have to do a couple of things that might be surprising. We manipulate the page _count directly on the assumption that we still have no guarantee that users of the block layer are prohibited from submitting bios containing pages with zero reference counts.[1] If such a prohibition now exists, I can get rid of the _count manipulation. Just as before this patch, we still keep track of the sk_buffs that the network layer still hasn't finished yet and cap the resources we use with a "pool" of skbs.[2] Now that the block layer maintains the disk stats, the aoe driver's diskstats function can go away. 1. https://lkml.org/lkml/2007/3/1/374 2. https://lkml.org/lkml/2007/7/6/241Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
Make the frames the aoe driver uses to track the relationship between bios and packets more flexible and detached, so that they can be passed to an "aoe_ktio" thread for completion of I/O. The frames are handled much like skbs, with a capped amount of preallocation so that real-world use cases are likely to run smoothly and degenerate gracefully even under memory pressure. Decoupling I/O completion from the receive path and serializing it in a process makes it easier to think about the correctness of the locking in the driver, especially in the case of a remote MAC address becoming unusable. [dan.carpenter@oracle.com: cleanup an allocation a bit] Signed-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ed Cashin 提交于
tAdd adds the ability to work with large packets composed of a number of segments, using the scatter gather feature of the block layer (biovecs) and the network layer (skb frag array). The motivation is the performance gained by using a packet data payload greater than a page size and by using the network card's scatter gather feature. Users of the out-of-tree aoe driver already had these changes, but since early 2011, they have complained of increased memory utilization and higher CPU utilization during heavy writes.[1] The commit below appears related, as it disables scatter gather on non-IP protocols inside the harmonize_features function, even when the NIC supports sg. commit f01a5236 Author: Jesse Gross <jesse@nicira.com> Date: Sun Jan 9 06:23:31 2011 +0000 net offloading: Generalize netif_get_vlan_features(). With that regression in place, transmits always linearize sg AoE packets, but in-kernel users did not have this patch. Before 2.6.38, though, these changes were working to allow sg to increase performance. 1. http://www.spinics.net/lists/linux-mm/msg15184.htmlSigned-off-by: NEd Cashin <ecashin@coraid.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Clements 提交于
Add discard support to nbd. If the nbd-server supports discard, it will send NBD_FLAG_SEND_TRIM to the client. The client will then set the flag in the kernel via NBD_SET_FLAGS, which tells the kernel to enable discards for the device (QUEUE_FLAG_DISCARD). If discard support is enabled, then when the nbd client system receives a discard request, this will be passed along to the nbd-server. When the discard request is received by the nbd-server, it will perform: fallocate(.. FALLOC_FL_PUNCH_HOLE ..) To punch a hole in the backend storage, which is no longer needed. Signed-off-by: NPaul Clements <paul.clements@steeleye.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-