- 17 6月, 2011 1 次提交
-
-
由 Tejun Heo 提交于
do_signal_stop() implemented both normal group stop and trap for group stop while ptraced. This approach has been enough but scheduled changes require trap mechanism which can be used in more generic manner and using group stop trap for generic trap site simplifies both userland visible interface and implementation. This patch adds a new jobctl flag - JOBCTL_TRAP_STOP. When set, it triggers a trap site, which behaves like group stop trap, in get_signal_to_deliver() after checking for pending signals. While ptraced, do_signal_stop() doesn't stop itself. It initiates group stop if requested and schedules JOBCTL_TRAP_STOP and returns. The caller - get_signal_to_deliver() - is responsible for checking whether TRAP_STOP is pending afterwards and handling it. ptrace_attach() is updated to use JOBCTL_TRAP_STOP instead of JOBCTL_STOP_PENDING and __ptrace_unlink() to clear all pending trap bits and TRAPPING so that TRAP_STOP and future trap bits don't linger after detach. While at it, add proper function comment to do_signal_stop() and make it return bool. -v2: __ptrace_unlink() updated to clear JOBCTL_TRAP_MASK and TRAPPING instead of JOBCTL_PENDING_MASK. This avoids accidentally clearing JOBCTL_STOP_CONSUME. Spotted by Oleg. -v3: do_signal_stop() updated to return %false without dropping siglock while ptraced and TRAP_STOP check moved inside for(;;) loop after group stop participation. This avoids unnecessary relocking and also will help avoiding unnecessary traps by consuming group stop before handling pending traps. -v4: Jobctl trap handling moved into a separate function - do_jobctl_trap(). Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com>
-
- 05 6月, 2011 9 次提交
-
-
由 Tejun Heo 提交于
Remove the following three noop tracehooks in signals.c. * tracehook_force_sigpending() * tracehook_get_signal() * tracehook_finish_jctl() The code area is about to be updated and these hooks don't do anything other than obfuscating the logic. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
由 Tejun Heo 提交于
ptracer->signal->wait_chldexit was used to wait for TRAPPING; however, ->wait_chldexit was already complicated with waker-side filtering without adding TRAPPING wait on top of it. Also, it unnecessarily made TRAPPING clearing depend on the current ptrace relationship - if the ptracee is detached, wakeup is lost. There is no reason to use signal->wait_chldexit here. We're just waiting for JOBCTL_TRAPPING bit to clear and given the relatively infrequent use of ptrace, bit_waitqueue can serve it perfectly. This patch makes JOBCTL_TRAPPING wait use bit_waitqueue instead of signal->wait_chldexit. -v2: Use JOBCTL_*_BIT macros instead of ilog2() as suggested by Linus. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
由 Tejun Heo 提交于
task->jobctl currently hosts JOBCTL_STOP_PENDING and will host TRAP pending bits too. Setting pending conditions on a dying task may make the task unkillable. Currently, each setting site is responsible for checking for the condition but with to-be-added job control traps this becomes too fragile. This patch adds task_set_jobctl_pending() which should be used when setting task->jobctl bits to schedule a stop or trap. The function performs the followings to ease setting pending bits. * Sanity checks. * If fatal signal is pending or PF_EXITING is set, no bit is set. * STOP_SIGMASK is automatically cleared if new value is being set. do_signal_stop() and ptrace_attach() are updated to use task_set_jobctl_pending() instead of setting STOP_PENDING explicitly. The surrounding structures around setting are changed to fit task_set_jobctl_pending() better but there should be no userland visible behavior difference. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
由 Tejun Heo 提交于
JOBCTL_TRAPPING indicates that ptracer is waiting for tracee to (re)transit into TRACED. task_clear_jobctl_pending() must be called when either tracee enters TRACED or the transition is cancelled for some reason. The former is achieved by explicitly calling task_clear_jobctl_pending() in ptrace_stop() and the latter by calling it at the end of do_signal_stop(). Calling task_clear_jobctl_trapping() at the end of do_signal_stop() limits the scope TRAPPING can be used and is fragile in that seemingly unrelated changes to tracee's control flow can lead to stuck TRAPPING. We already have task_clear_jobctl_pending() calls on those cancelling events to clear JOBCTL_STOP_PENDING. Cancellations can be handled by making those call sites use JOBCTL_PENDING_MASK instead and updating task_clear_jobctl_pending() such that task_clear_jobctl_trapping() is called automatically if no stop/trap is pending. This patch makes the above changes and removes the fallback task_clear_jobctl_trapping() call from do_signal_stop(). Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
由 Tejun Heo 提交于
This patch introduces JOBCTL_PENDING_MASK and replaces task_clear_jobctl_stop_pending() with task_clear_jobctl_pending() which takes an extra @mask argument. JOBCTL_PENDING_MASK is currently equal to JOBCTL_STOP_PENDING but future patches will add more bits. recalc_sigpending_tsk() is updated to use JOBCTL_PENDING_MASK instead. task_clear_jobctl_pending() takes @mask which in subset of JOBCTL_PENDING_MASK and clears the relevant jobctl bits. If JOBCTL_STOP_PENDING is set, other STOP bits are cleared together. All task_clear_jobctl_stop_pending() users are updated to call task_clear_jobctl_pending() with JOBCTL_STOP_PENDING which is functionally identical to task_clear_jobctl_stop_pending(). This patch doesn't cause any functional change. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
由 Tejun Heo 提交于
In ptrace_stop(), after arch hook is done, the task state and jobctl bits are updated while holding siglock. The ordering requirement there is that TASK_TRACED is set before JOBCTL_TRAPPING is cleared to prevent ptracer waiting on TRAPPING doesn't end up waking up TRACED is actually set and sees TASK_RUNNING in wait(2). Move set_current_state(TASK_TRACED) to the top of the block and reorganize comments. This makes the ordering more obvious (TASK_TRACED before other updates) and helps future updates to group stop participation. This patch doesn't cause any functional change. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
由 Tejun Heo 提交于
PTRACE_INTERRUPT is going to be added which should also skip task_is_traced() check in ptrace_check_attach(). Rename @kill to @ignore_state and make it bool. Add function comment while at it. This patch doesn't introduce any behavior difference. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
由 Tejun Heo 提交于
signal->group_stop currently hosts mostly group stop related flags; however, it's gonna be used for wider purposes and the GROUP_STOP_ flag prefix becomes confusing. Rename signal->group_stop to signal->jobctl and rename all GROUP_STOP_* flags to JOBCTL_*. Bit position macros JOBCTL_*_BIT are defined and JOBCTL_* flags are defined in terms of them to allow using bitops later. While at it, reassign JOBCTL_TRAPPING to bit 22 to better accomodate future additions. This doesn't cause any functional change. -v2: JOBCTL_*_BIT macros added as suggested by Linus. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
由 Tejun Heo 提交于
Remove local variable wait_trap which determines whether to wait for !TRAPPING or not and simply wait for it if attach was successful. -v2: Oleg pointed out wait should happen iff attach was successful. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: NOleg Nesterov <oleg@redhat.com>
-
- 04 6月, 2011 12 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] Fix oops caused by queue refcounting failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits) tg3: Fix tg3_skb_error_unmap() net: tracepoint of net_dev_xmit sees freed skb and causes panic drivers/net/can/flexcan.c: add missing clk_put net: dm9000: Get the chip in a known good state before enabling interrupts drivers/net/davinci_emac.c: add missing clk_put af-packet: Add flag to distinguish VID 0 from no-vlan. caif: Fix race when conditionally taking rtnl lock usbnet/cdc_ncm: add missing .reset_resume hook vlan: fix typo in vlan_dev_hard_start_xmit() net/ipv4: Check for mistakenly passed in non-IPv4 address iwl4965: correctly validate temperature value bluetooth l2cap: fix locking in l2cap_global_chan_by_psm ath9k: fix two more bugs in tx power cfg80211: don't drop p2p probe responses Revert "net: fix section mismatches" drivers/net/usb/catc.c: Fix potential deadlock in catc_ctrl_run() sctp: stop pending timers and purge queues when peer restart asoc drivers/net: ks8842 Fix crash on received packet when in PIO mode. ip_options_compile: properly handle unaligned pointer iwlagn: fix incorrect PCI subsystem id for 6150 devices ...
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-block: block: Use hlist_entry() for io_context.cic_list.first cfq-iosched: Remove bogus check in queue_fail path xen/blkback: potential null dereference in error handling xen/blkback: don't call vbd_size() if bd_disk is NULL block: blkdev_get() should access ->bd_disk only after success CFQ: Fix typo and remove unnecessary semicolon block: remove unwanted semicolons Revert "block: Remove extra discard_alignment from hd_struct." nbd: adjust 'max_part' according to part_shift nbd: limit module parameters to a sane value nbd: pass MSG_* flags to kernel_recvmsg() block: improve the bio_add_page() and bio_add_pc_page() descriptions
-
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: Blackfin: strncpy: fix handling of zero lengths
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: asm-generic/unistd.h: support sendmmsg syscall tile: enable CONFIG_BUGVERBOSE
-
git://git.infradead.org/ubifs-2.6由 Linus Torvalds 提交于
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix-up free space earlier UBIFS: intialize LPT earlier UBIFS: assert no fixup when writing a node UBIFS: fix clean znode counter corruption in error cases UBIFS: fix memory leak on error path UBIFS: fix shrinker object count reports UBIFS: fix recovery broken by the previous recovery fix UBIFS: amend ubifs_recover_leb interface UBIFS: introduce a "grouped" journal head flag UBIFS: supress false error messages
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest: ktest: Ignore unset values of the minconfig in config_bisect ktest: Fix result of rebooting the kernel ktest: Fix off-by-one in config bisect result
-
由 Linus Torvalds 提交于
Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: mach-shmobile: add DMAC clock definitions on SH7372 ARM: arch-shmobile: support SDHI card detection on mackerel, using a GPIO sh_mobile_meram: MERAM platform data for LCDC
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: dmaengine: shdma: fix a regression: initialise DMA channels for memcpy dmaengine: shdma: Fix up fallout from runtime PM changes. Revert "clocksource: sh_cmt: Runtime PM support" Revert "clocksource: sh_tmu: Runtime PM support" sh: Fix up asm-generic/ptrace.h fallout. sh64: Move from P1SEG to CAC_ADDR for consistent sync. sh64: asm/pgtable.h needs asm/mmu.h sh: asm/tlb.h needs linux/swap.h sh: mark DMA slave ID 0 as invalid sh: Update shmin to reflect PIO dependency. sh: arch/sh/kernel/process_32.c needs linux/prefetch.h. sh: add MMCIF runtime PM support on ecovec sh: switch ap325rxa to dynamically manage the platform camera
-
由 Linus Torvalds 提交于
This reverts commit ed0bd233. Since we reverted the TTY API change, we should revert the ASoC update to it too. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This reverts commit b1c43f82. It was broken in so many ways, and results in random odd pty issues. It re-introduced the buggy schedule_work() in flush_to_ldisc() that can cause endless work-loops (see commit a5660b41: "tty: fix endless work loop when the buffer fills up"). It also used an "unsigned int" return value fo the ->receive_buf() function, but then made multiple functions return a negative error code, and didn't actually check for the error in the caller. And it didn't actually work at all. BenH bisected down odd tty behavior to it: "It looks like the patch is causing some major malfunctions of the X server for me, possibly related to PTYs. For example, cat'ing a large file in a gnome terminal hangs the kernel for -minutes- in a loop of what looks like flush_to_ldisc/workqueue code, (some ftrace data in the quoted bits further down). ... Some more data: It -looks- like what happens is that the flush_to_ldisc work queue entry constantly re-queues itself (because the PTY is full ?) and the workqueue thread will basically loop forver calling it without ever scheduling, thus starving the consumer process that could have emptied the PTY." which is pretty much exactly the problem we fixed in a5660b41. Milton Miller pointed out the 'unsigned int' issue. Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: NMilton Miller <miltonm@bga.com> Cc: Stefan Bigler <stefan.bigler@keymile.com> Cc: Toby Gray <toby.gray@realvnc.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem
-
- 03 6月, 2011 10 次提交
-
-
由 Ben Gardiner 提交于
The free space fixup is currently initiated during mount after the call to ubifs_write_master() which results in a write to PEBs; this has been observed with the patch 'assert no fixup when writing a node' applied: Move the free space fixup on mount to before the calls to ubifs_recover_inl_heads() and ubifs_write_master(). This results in no assertions with the previously mentioned patch applied. Artem: tweaked the patch a bit Signed-off-by: NBen Gardiner <bengardiner@nanometrics> Reviewed-by: NMatthew L. Creech <mlcreech@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Ben Gardiner 提交于
The current 'mount_ubifs()' implementation does not initialize the LPT until the the master node is marked dirty. Move the LPT initialization to before marking the master node dirty. This is a preparation for the next patch which will move the free-space-fixup check to before marking the master node dirty, because we have to fix-up the free space before doing any writes. Artem: massaged the patch and commit message. Signed-off-by: NBen Gardiner <bengardiner@nanometrics.ca> Reviewed-by: NMatthew L. Creech <mlcreech@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Ben Gardiner 提交于
The current free space fixup can result in some writing to the UBI volume when the space_fixup flag is set. To catch instances where UBIFS is writing to the NAND while the space_fixup flag is set, add an assert to ubifs_write_node(). Artem: tweaked the patch, added similar assertion to the write buffer write path. Signed-off-by: NBen Gardiner <bengardiner@nanometrics.ca> Reviewed-by: NMatthew L. Creech <mlcreech@gmail.com> Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
UBIFS maintains per-filesystem and global clean znode counters ('c->clean_zn_cnt' and 'ubifs_clean_zn_cnt'). It is important to maintain correct values there since the shrinker relies on 'ubifs_clean_zn_cnt'. However, in case of failures during commit the counters were corrupted. E.g., if a failure happens in the middle of 'write_index()', then some nodes in the commit list ('c->cnext') are marked as clean, and some are marked as dirty. And the 'ubifs_destroy_tnc_subtree()' frees does not retrun correct count, and we end up with non-zero 'c->clean_zn_cnt' when unmounting. This means that if we have 2 file-sytem and one of them fails, and we unmount it, 'ubifs_clean_zn_cnt' stays incorrect and confuses the shrinker. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
-
由 Artem Bityutskiy 提交于
UBIFS leaks memory on error path in 'ubifs_jnl_update()' in case of write failure because it forgets to free the 'struct ubifs_dent_node *dent' object. Although the object is small, the alignment can make it large - e.g., 2KiB if the min. I/O unit is 2KiB. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org
-
由 Artem Bityutskiy 提交于
Sometimes VM asks the shrinker to return amount of objects it can shrink, and we return the ubifs_clean_zn_cnt in that case. However, it is possible that this counter is negative for a short period of time, due to the way UBIFS TNC code updates it. And I can observe the following warnings sometimes: shrink_slab: ubifs_shrinker+0x0/0x2b7 [ubifs] negative objects to delete nr=-8541616642706119788 This patch makes sure UBIFS never returns negative count of objects. Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org
-
由 Steven Miao 提交于
The jump to 4f will cause the NUL padding loop to run at least one time, so if string length is zero just jump to the end. Otherwise we wrongly write one NUL byte when size==0. Signed-off-by: NSteven Miao <realmz6@gmail.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Matt Carlson 提交于
This function attempts to free one fragment beyond the number of fragments that were actually mapped. This patch brings back the limit to the correct spot. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Tested-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Koki Sanagi 提交于
Because there is a possibility that skb is kfree_skb()ed and zero cleared after ndo_start_xmit, we should not see the contents of skb like skb->len and skb->dev->name after ndo_start_xmit. But trace_net_dev_xmit does that and causes panic by NULL pointer dereference. This patch fixes trace_net_dev_xmit not to see the contents of skb directly. If you want to reproduce this panic, 1. Get tracepoint of net_dev_xmit on 2. Create 2 guests on KVM 2. Make 2 guests use virtio_net 4. Execute netperf from one to another for a long time as a network burden 5. host will panic(It takes about 30 minutes) Signed-off-by: NKoki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris Metcalf 提交于
Signed-off-by: NChris Metcalf <cmetcalf@tilera.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 02 6月, 2011 8 次提交
-
-
由 Steven Rostedt 提交于
By ignoring the unset values of the minconfig in deciding what to test in the config_bisect can cause the problem config from being tested too. Just do not test the configs that are set in the minconfig. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
The command that is called that reboots the kernel may fail but the return code is not passed back to the ktest.pl script. This is because a ';' is used between the two commands and if the second command fails, only the first command's return code is returned. Using a '&&' between the two commands fixes this. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Steven Rostedt 提交于
Because in perl the array size returned by $#arr, is the last index and not the actually size of the array, we end the config bisect early, thinking there is only one config left when there are in fact two. Thus the result has a 50% chance of picking the correct config that caused the problem. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
-
由 Jens Axboe 提交于
Merge branch 'for-jens/xen-blkback.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus
-
由 Paul Bolle 提交于
list_entry() and hlist_entry() are both simply aliases for container_of(), but since io_context.cic_list.first is an hlist_node one should at least use the correct alias. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Paul Bolle 提交于
queue_fail can only be reached if cic is NULL, so its check for cic must be bogus. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 James Bottomley 提交于
In certain circumstances, we can get an oops from a torn down device. Most notably this is from CD roms trying to call scsi_ioctl. The root cause of the problem is the fact that after scsi_remove_device() has been called, the queue is fully torn down. This is actually wrong since the queue can be used until the sdev release function is called. Therefore, we add an extra reference to the queue which is released in sdev->release, so the queue always exists. Reported-by: NParag Warudkar <parag.lkml@gmail.com> Cc: stable@kernel.org Signed-off-by: NJames Bottomley <jbottomley@parallels.com>
-
由 Julia Lawall 提交于
The failed_get label is used after the call to clk_get has succeeded, so it should be moved up above the call to clk_put. The failed_req labels doesn't do anything different than failed_get, so delete it. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-